Escherichia coli as a bioreporter in ecotoxicology

High-throughput characterization of bacterial responses to complex mixtures of chemical pollutants

Our understanding of how microbes respond to micropollutants, such as pesticides, is almost wholly based on single-species responses to individual chemicals. However, in natural environments, microbes experience multiple pollutants simultaneously. Here we perform a matrix of multi-stressor experiments by assaying the growth of model and non-model strains of bacteria in all 255 combinations of 8 chemical stressors (antibiotics, herbicides, fungicides and pesticides). We found that bacterial strains responded in different ways to stressor mixtures, which could not be predicted simply from their phylogenetic relatedness. Increasingly complex chemical mixtures were both more likely to negatively impact bacterial growth in monoculture and more likely to reveal net interactive effects. A mixed co-culture of strains proved more resilient to increasingly complex mixtures and revealed fewer interactions in the growth response. These results show predictability in microbial population responses to chemical stressors and could increase the utility of next-generation eco-toxicological assays.

Transcription Factor-Based Biosensors for Detecting Pathogens

Microorganisms are omnipresent and inseparable from our life. Many of them are beneficial to humans, while some are not. Importantly, foods and beverages are susceptible to microbial contamination, with their toxins causing illnesses and even death in some cases. Therefore, monitoring and detecting harmful microorganisms are critical to ensuring human health and safety. For several decades, many methods have been developed to detect and monitor microorganisms and their toxicants. Conventionally, nucleic acid analysis and antibody-based analysis were used to detect pathogens. Additionally, diverse chromatographic methods were employed to detect toxins based on their chemical and structural properties. However, conventional techniques have several disadvantages concerning analysis time, sensitivity, and expense. With the advances in biotechnology, new approaches to detect pathogens and toxins have been reported to compensate for the disadvantages of conventional analysis from different research fields, including electrochemistry, nanotechnology, and molecular biology. Among them, we focused on the recent studies of transcription factor (TF)-based biosensors to detect microorganisms and discuss their perspectives and applications. Additionally, the other biosensors for detecting microorganisms reported in recent studies were also introduced in this review.

Chromogenic Escherichia coli reporter strain for screening DNA damaging agents

The presence of pollutants in soil and water has given rise to diverse analytical and biological approaches to detect and measure contaminants in the environment. Using bacterial cells as reporter strains represents an advantage for detecting pollutants present in soil or water samples. Here, an Escherichia coli reporter strain expressing a chromoprotein capable of interacting with soil or water samples and responding to DNA damaging compounds is validated. The reporter strain generates a qualitative signal and is based on the expression of the coral chromoprotein AmilCP under the control of the recA promoter. This strain can be used simply by applying soil or water samples directly and rendering activation upon DNA damage. This reporter strain responds to agents that damage DNA (with an apparent detection limit of 1 µg of mitomycin C) without observable response to membrane integrity damage, protein folding or oxidative stress generating agents, in the latter case, DNA damage was observed. The developed reporter strain reported here is effective for the detection of DNA damaging agents present in soils samples. In a proof-of-concept analysis using soil containing chromium, showing activation at 15.56 mg/L of Cr(VI) present in soil and leached samples and is consistent with Cr(III) toxicity at high concentrations (130 µg). Our findings suggest that chromogenic reporter strains can be applied for simple screening, thus reducing the number of samples requiring analytical techniques.

Characteristics and impact of aged coal ash with slag emplaced in a karst cave: the case of Divaška jama, Slovenia

A mixture of coal bottom ash and slag, with a fraction of fly ash (CAFAS) from steam locomotives, was placed in the cave Divaška jama to delimit and level tourist trails. Emplacement began in 1914 and carried on for several decades. The CAFAS mixed with other cave material gradually changed its structure and appearance. Currently the concentration of some elements in the CAFAS (As, Cu, Hg, Ni, Pb, Zn), and also to a lesser extent in cave sediments (Cr, Cu, Ni), indicates a possibly harmful effect on sediment-associated biota based on ecotoxicological assays. Compared to the cave sediment, the CAFAS contains distinctly different mineral phases and presents a different source of radioactivity. Microbial metabolic activity of CAFAS is low, 0.22 μl O₂/gDW h, but higher than that of cave sediment. The present environmental hazards from CAFAS are estimated to be low. Whereas the emplacement of CAFAS was seen initially a long-term solution for waste disposal and management of the cave, it turned out that CAFAS enriches the underground environment with inorganic and organic compounds and disperses pollution into the cave ecosystem. After its removal from the cave, the CAFAS should be investigated thoroughly due to its susceptibility to alteration.

Investigation of paracetamol degradation using LED and UV-C photo-reactors

This work investigates the efficiency of LED and UV-C photo-reactors for paracetamol degradation using advanced oxidative processes. Among the evaluated processes, photo-Fenton was the most efficient for both radiations. Degradations greater than 81% (λ 197 nm) and 91% (λ 243 nm) were obtained in the kinetic study. These degradations were also observed by means of the reduction in the peaks in both spectral scanning and high-performance liquid chromatography analysis. The good fit of the Chan and Chu kinetic model shows that the degradation reaction has pseudo-first order behavior. Toxicity tests did not indicate the inhibition of growth of Lactuca sativa seeds and Escherichia coli bacterium. However, the growth of strains of the Salmonella enteritidis bacterium was inhibited in all the samples, demonstrating that only this bacterium was sensitive to solutions. The proposed empirical models obtained from the 2⁴ factorial designs were able to predict paracetamol degradation. These models could, at the same levels assessed, be used to predict the percentage of degradation in studies using other organic compounds. The LED and UV-C photo-reactors were, when employing the photo-Fenton process, able to degrade paracetamol, thus highlighting the efficiency of LED radiation when its power (three times smaller) is compared to that of UV-C radiation.

Immobilization of fluorescent bacterial bioreporter for arsenic detection

Whole-cell bacterial biosensors hold great promise as a practical complementary approach for in-field detection of arsenic. Although there are various bacterial bioreporter systems for arsenic detection, fewer studies reported the immobilization of arsenic bioreporters. This study aimed at determining immobilization of specific bacterial bioreporter in agar and alginate biopolymers to measure level of arsenite and/or arsenate. To achieve sensitive detection, immobilization parameters of polymer concentration and cell density were evaluated. Moreover, by changing the culture medium, immobilized bioreporter cells in minimal medium can detect arsenite while they can detect both arsenite and arsenate in phosphate-limited minimal medium. When optimal parameters were applied, agar and alginate immobilized bioreporter systems can detect arsenite and arsenate concentrations of 10 μg/l and 200 μg/l within 5 h and 2 h, respectively. The results showed that the immobilized bacterial bioreporter systems are able to determine the concentrations of the two abundant species of arsenic; arsenite and arsenate, as opposed to other studies which reported only arsenite detection. This is the first study describe agar hydrogel and alginate bead immobilization of fluorescent arsenic bacterial bioreporter that can detect both arsenite and arsenate at the safe drinking water limit. Thus, this study will enable further steps to be taken towards developing sensitive and selective portable devices to assess environmental arsenic contamination and prevent acute arsenic toxicity.

Modulation of the Metal(loid) Specificity of Whole-Cell Bioreporters by Genetic Engineering of ZntR Metal-Binding Loops

Bacterial cell-based biosensors, or whole-cell bioreporters (WCBs), are an alternative tool for the quantification of hazardous materials. Most WCBs share similar working mechanisms. In brief, the recognition of a target by sensing domains induces a biological event, such as changes in protein conformation or gene expression, providing a basis for quantification. WCBs targeting heavy metal(loid)s employ metalloregulators as sensing domains and control the expression of genes in the presence of target metal(loid) ions, but the diversity of targets, specificity, and sensitivity of these WCBs are limited. In this study, we genetically engineered the metal-binding loop (MBL) of ZntR, which controls the znt-operon in Escherichia coli. In the MBL of ZntR, three Cys sites interact with metal ions. Based on the crystal structure of ZntR, MBL sequences were modified by sitedirected mutagenesis. As a result, the metal-sensing properties of WCBs differed depending on amino acid sequences and the new selectivity to Cr or Pb was observed. Although there is room for improvement, our results support the use of currently available WCBs as a platform to generate new WCBs to target other environmental pollutants including metal(loid)s.

Antimony sensing whole-cell bioreporters derived from ArsR genetic engineering

Despite the known hazardous effects of antimony (Sb) on human health, Sb monitoring biosensors have not been as actively investigated as arsenic (As) biosensors. Whole-cell bioreporters (WCBs) employing an arsenic-responsive operon and a regulatory protein (ArsR) are reportedly capable of monitoring arsenite, arsenate, and antimonite. However, the potential of WCBs as Sb biosensors has been largely ignored. Here, the metal-binding site of ArsR (sequenced as ELCVCDLCTA from amino acid number 30 to 39) was modified via genetic engineering to enhance Sb specificity. By relocating cysteine residues and introducing point mutations, nine ArsR mutants were generated and tested for metal(loid) ion specificity. The Sb specificity of WCBs was enhanced by the C37S/A39C and L36C/C37S mutations on the As binding site of ArsR. Additionally, WCBs with other ArsR mutants exhibited new target sensing capabilities toward Cd and Pb. Although further research is required to enhance the specificity and sensitivity of WCBs and to broaden their practical applications, our proposed strategy based on genetic engineering of regulatory proteins provides a valuable basis to generate WCBs to monitor novel targets.

Specific heavy metal/metalloid sensors: current state and perspectives

Heavy metal(loid)s play pivotal roles in regulating physiological and developmental aspects in living organisms depending on their concentration. For example, a trace amount of heavy metal(loid)s is essential for living organisms, but heavy metal(loid)s in high concentrations negatively affect their physiology and development. Because of rapid industrial developments, heavy metal(loid)s have been accumulating in environmental systems, thereby becoming a threat to human health and the earth's ecosystem. Thus, the development of tools to quantify and monitor heavy metal(loid)s in environmental systems has become essential. Typically, risk has been determined through instrument-based analysis, regardless of the shortcomings regarding expense and duration. Nowadays, the need for alternative tools, besides instrumental analysis, to detect heavy metals has prompted the development of new techniques, and many different methods have been reported from various research areas, including new techniques based on electrochemistry and biological systems. Nonetheless, it seems that the gap between laboratory and fieldwork is still greater than it should be when it comes to applying these systems. In this mini-review, we discuss the current status of heavy metals/metalloid detection techniques, with an emphasis on biosensors. Moreover, we discuss the advantages and disadvantages as well as the mechanisms behind newly developed sensors and make suggestions to improve applicability and to develop new objective targeting sensors. Although many different types of metal(loid) sensors are available, we focused on metal sensors based on biological systems. Additionally, we suggest potent approaches to developing new biosensor systems based on current metal sensor mechanisms.

Peroxiredoxin (2-cys-prx) and catalase (katA) cyanobacterial-based bioluminescent bioreporters to detect oxidative stress in the aquatic environment

The detection of oxidative stress caused by emerging pollutants in aquatic systems is essential to carry out toxicological analysis since they can bring us information about the mechanisms of toxic action of the pollutants, which might be useful to address this contamination. To achieve this goal, two self-bioluminescent strains that respond to oxidative stress based on the filamentous cyanobacterium Nostoc sp. PCC7120, which has a high ecological relevance in aquatic continental systems, have been constructed. Nostoc sp. PCC7120 pBG2172 harbours the promoter region of the 2-cys-prx gene (P2-cys-prx), encoding a cytoplasmic peroxiredoxin, fused to luxCDABE genes of the bacterium Photorhabdus luminescens. Nostoc sp. PCC7120 pBG2173 harbours the promoter region of the KatA gene (PkatA), a cytoplasmic catalase, also fused to luxCDABE genes. Both strains have been characterized by exposing them to H₂O₂: Nostoc sp. PCC7120 pBG2172 responded while Nostoc sp. PCC7120 pBG2173 did not respond to this pollutant. In order to know their specificity, they were exposed to methyl viologen (MV), an herbicide that produces superoxide anion (O₂^-) and a bioluminescence response was observed in both strains. Besides, the utility of these strains for the detection of H₂O₂ and MV in natural water samples, both pristine and wastewater samples has been tested by spiking experiments. Finally, the possible application of these strains for the detection of the emerging pollutant triclosan has also been tested showing to be suitable bioreporters to study oxidative stress in aquatic environments.

Heavy metal(loid) biosensor based on split-enhanced green fluorescent protein: development and characterization

Heavy metal(loid)s such as Cd and Hg adversely affect human health and are therefore strictly regulated and monitored; however, their quantitation in the environment is usually performed by expensive and time-consuming instrumental analysis techniques, which necessitates the search for more practical alternatives. Herein, we prepare enhanced green fluorescent protein (eGFP)-based biomolecules for metal(loid) sensing by insertion of metal-binding loops (MBLs) into a loop region of eGFP to render this protein inactive and show that the binding of metal ions to MBLs induces a conformational change and restores the original activity. Specifically, eGFP with an MBL sequenced as CTTCGCG regains fluorescence upon exposure to Cd and Hg, which allows the above metals to be quantified in the concentration range of 0-5 μM. For practical applicability verification, the developed sensing platform is used to quantify Cd in artificially amended soil and water samples. Although the obtained results imply that sensor performance needs to be significantly improved, the presented design concept is believed to be of high value to researchers in the field of heavy metal sensing and facilitate the development of new biosensors.

A Biosensor Platform for Metal Detection Based on Enhanced Green Fluorescent Protein

Microbial cell-based biosensors, which mostly rely on stress-responsive operons, have been widely developed to monitor environmental pollutants. Biosensors are usually more convenient and inexpensive than traditional instrumental analyses of environmental pollutants. However, the targets of biosensors are restricted by the limited number of genetic operon systems available. In this study, we demonstrated a novel strategy to overcome this limitation by engineering an enhanced green fluorescent protein (eGFP). It has been reported that combining two fragments of split-eGFP can form a native structure. Thus, we engineered new biosensors by inserting metal-binding loops (MBLs) between β-strands 9 and 10 of the eGFP, which then undergoes conformational changes upon interaction between the MBLs and targets, thereby emitting fluorescence. The two designed MLBs based on our previous study were employed as linkers between two fragments of eGFP. As a result, an Escherichia coli biosensor exhibited a fluorescent signal only when interacting with cadmium ions, revealing the prospect of a new biosensor for cadmium detection. Although this study is a starting stage for further developing biosensors, we believe that the proposed strategy can serve as basis to develop new biosensors to target various environmental pollutants.

Regulation of organohalide respiration

Organohalide respiration (OHR) is an anaerobic metabolism by which bacteria conserve energy with the use of halogenated compounds as terminal electron acceptors. Genes involved in OHR are organized in reductive dehalogenase (rdh) gene clusters and can be found in relatively high copy numbers in the genomes of organohalide-respiring bacteria (OHRB). The minimal rdh gene set is composed by rdhA and rdhB, encoding the catalytic enzyme involved in reductive dehalogenation and its putative membrane anchor, respectively. In this chapter, we present the major findings concerning the regulatory strategies developed by OHRB to control the expression of the rdh gene clusters. The first section focuses on the description of regulation patterns obtained from targeted transcriptional analyses, and from transcriptomic and proteomic studies, while the second section offers a detailed overview of the biochemically characterized OHR regulatory proteins identified so far. Depending on OHRB, transcriptional regulators belonging to three different protein families are found in the direct vicinity of rdh gene clusters, suggesting that they activate the transcription of their cognate gene cluster. In this chapter, strong emphasis was laid on the family of CRP/FNR-type RdhK regulators which belong to members of the genera Dehalobacter and Desulfitobacterium. Whereas only chlorophenols have been identified as effectors for RdhK regulators, the protein sequence diversity suggests a broader organohalide spectrum. Thus, effector identification of new regulators offers a promising alternative to elucidate the substrates of yet uncharacterized reductive dehalogenases. Future work investigating the possible cross-talk between OHR regulators and their possible use as biosensors is discussed.

Two novel cyanobacterial bioluminescent whole-cell bioreporters based on superoxide dismutases MnSod and FeSod to detect superoxide anion

This work describes the construction of two novel self-luminescent bioreporter strains of the cyanobacterium Nostoc sp. PCC 7120 by fusing the promoter region of the sodA and sodB genes (encoding the superoxide dismutases MnSod and FeSod, respectively) to luxCDABE from Photorhabdus luminescens aimed at detecting pollutants that generate reactive oxygen species (ROS), particularly O₂^-. Bioreporters were tested against methyl viologen (MV) as the inducer of superoxide anion (O₂^-). Both bioreporters were specific for O₂^- and Limits of detection (LODs) and Maximum Permissive Concentrations (MPCs) were calculated: Nostoc sp. PCC 7120 pBG2154 (sodA) had a range of detection from 400 to 1000 pM of MV and for Nostoc sp. PCC 7120 pBG2165 (sodB) the range of detection was from 500 to 1800 pM of MV after 5 h-exposure. To further validate the bioreporters, they were tested with the emerging pollutant Triclosan which induced bioluminescence in both strains. Furthermore, the bioreporters performance was tested in two real environmental samples with different water matrix complexity, spiked with MV. Both bioreporters were induced by O₂^- in these environmental samples. In the case of the river water sample, the amount of bioavailable MV as calculated from the bioreporters output was similar to that nominally added. For the waste water sample, the bioavailable MV concentration detected by the bioreporters was one order of magnitude lower than nominal. These differences could be due to MV complexation with organic matter and/or co-occurring organic contaminants. These results confirm their high sensitivity to O₂^- and their suitability to detect oxidative stress-generating pollutants in fresh-waters.

Comparative toxicity of silver nanoparticles and silver ions to Escherichia coli

With the increase in silver (Ag)-based products in our lives, it is essential to test the potential toxicity of silver nanoparticles (AgNPs) and silver ions (Ag ions) on living organisms under various conditions. Here, we investigated the toxicity of AgNPs with Ag ions to Escherichia coli K-12 strain under various conditions. We observed that both AgNPs and Ag ions display antibacterial activities, and that Ag ions had higher toxicity to E. coli K-12 strain than AgNPs under the same concentrations. To understand the toxicity of AgNPs at a cellular level, reactive oxygen species (ROS) enzymes were detected for use as antioxidant enzymatic biomarkers. We have also studied the toxicity of AgNPs and Ag ions under various coexistence conditions including: fixed total concentration, with a varied the ratio of AgNPs to Ag ions; fixed the AgNPs concentration and then increased the Ag ions concentration; fixed Ag ions concentration and then increasing the AgNPs concentration. Exposure to AgNPs and Ag ions clearly had synergistic toxicity; however, decreased toxicity (for a fixed AgNPs concentration of 5mg/L, after increasing the Ag ions concentration) to E. coli K-12 strain. AgNPs and Ag ions in the presence of L-cysteine accelerated the bacterial cell growth rate, thereby reducing the bioavailability of Ag ions released from AgNPs under the single and coexistence conditions. Further works are needed to consider this potential for AgNPs and Ag ions toxicity across a range of environmental conditions.

ENVIRONMENTAL SIGNIFICANCE STATEMENT

As silver nanoparticles (AgNPs)-based products are being broadly used in commercial industries, an ecotoxicological understanding of the AgNPs being released into the environment should be further considered. Here, we investigate the comparative toxicity of AgNPs and silver ions (Ag ions) to Escherichia coli K-12 strain, a representative ecotoxicological bioreporter. This study showed that toxicities of AgNPs and Ag ions to E. coli K-12 strain display different relationships when existing individually or when coexisting, and in the presence of L-cysteine materials. These findings suggest that the toxicology research of nanomaterials should consider conditions when NPs coexist with and without their bioavailable ions.

Development of a 2-Nitrobenzoate-Sensing Bioreporter Based on an Inducible Gene Cluster

Based on the sole information of structural genes of the 2-nitrobenzoate (2NBA) utilizing catabolic gene cluster (onbX1X2FCAR1EHJIGDBX3), 2NBA-sensing bioreporters were constructed by incorporating egfp into the onb gene cluster of Cupriavidus sp. strain ST-14. Incorporation of reporter gene in proximal to the hypothesized promoter region in conjunction with the disruption of the gene encoding inducer-metabolizing enzyme was turned out to be advantageous in reporter gene expression at low inducer concentration. The bioreporter strain was capable of expressing EGFP from the very 1st hour of induction and could detect 2NBA at (sub) nanomolar level exhibiting a strict specificity toward 2NBA, displaying no response to EGFP expression from its meta- and para-isomers as well as from a number of structurally related compounds. The present study is a successful demonstration of the development of a 2NBA-sensing bioreporter with respect to ease of construction, inducer specificity, and sensitivity, without prior knowledge of the associated inducer-responsive promoter-regulator elements. The present approach can be used as a model for the development of bioreporters for other environmental pollutants.

A whole-cell bioreporter assay for quantitative genotoxicity evaluation of environmental samples

Whole-cell bioreporters have emerged as promising tools for genotoxicity evaluation, due to their rapidity, cost-effectiveness, sensitivity and selectivity. In this study, a method for detecting genotoxicity in environmental samples was developed using the bioluminescent whole-cell bioreporter Escherichia coli recA::luxCDABE. To further test its performance in a real world scenario, the E. coli bioreporter was applied in two cases: i) soil samples collected from chromium(VI) contaminated sites; ii) crude oil contaminated seawater collected after the Jiaozhou Bay oil spill which occurred in 2013. The chromium(VI) contaminated soils were pretreated by water extraction, and directly exposed to the bioreporter in two phases: aqueous soil extraction (water phase) and soil supernatant (solid phase). The results indicated that both extractable and soil particle fixed chromium(VI) were bioavailable to the bioreporter, and the solid-phase contact bioreporter assay provided a more precise evaluation of soil genotoxicity. For crude oil contaminated seawater, the response of the bioreporter clearly illustrated the spatial and time change in genotoxicity surrounding the spill site, suggesting that the crude oil degradation process decreased the genotoxic risk to ecosystem. In addition, the performance of the bioreporter was simulated by a modified cross-regulation gene expression model, which quantitatively described the DNA damage response of the E. coli bioreporter. Accordingly, the bioluminescent response of the bioreporter was calculated as the mitomycin C equivalent, enabling quantitative comparison of genotoxicities between different environmental samples. This bioreporter assay provides a rapid and sensitive screening tool for direct genotoxicity assessment of environmental samples.

Cell-SELEX Based Identification of an RNA Aptamer for Escherichia coli and Its Use in Various Detection Formats

Escherichia coli are important indicator organisms, used routinely for the monitoring of water and food safety. For quick, sensitive and real-time detection of E. coli we developed a 2'F modified RNA aptamer Ec3, by Cell-SELEX. The 31 nucleotide truncated Ec3 demonstrated improved binding and low nano-molar affinity to E. coli. The aptamer developed by us out-performs the commercial antibody and aptamer used for E. coli detection. Ec3(31) aptamer based E. coli detection was done using three different detection formats and the assay sensitivities were determined. Conventional Ec3(31)-biotin-streptavidin magnetic separation could detect E. coli with a limit of detection of 1.3 × 106 CFU/ml. Although, optical analytic technique, biolayer interferometry, did not improve the sensitivity of detection for whole cells, a very significant improvement in the detection was seen with the E. coli cell lysate (5 × 104 CFU/ml). Finally we developed Electrochemical Impedance Spectroscopy (EIS) gap capacitance biosensor that has detection limits of 2 × 104 CFU/mL of E. coli cells, without any labeling and signal amplification techniques. We believe that our developed method can step towards more complex and real sample application.

Construction of a bioreporter by heterogeneously expressing a Vibrio natriegens recA::luxCDABE fusion in Escherichia coli, and genotoxicity assessments of petrochemical-contaminated groundwater in northern China

Here, we constructed an Escherichia coli recA::luxCDABE bioreporter for genotoxicity assessments. The recA promoter was cloned from the marine bacterium Vibrio natriegens. This bioreporter showed a dose-response relationship following induction by mitomycin C, and other pollutants or environmental samples could be calculated as mitomycin C equivalents, which provided a way to quantitatively compare the genotoxicities of different environmental samples. This bioreporter was used to evaluate the genotoxicity under a wide range of external environmental conditions, like temperatures ranging from 15 °C to 42 °C, pH between 4.0 and 9.0, and salinity ranging from 0% to 3%. This successfully extended its application from the laboratory to the field, and allowed the bioreporter to assess the genotoxicity and bioavailability of genotoxins in various environmental media, including surface water, groundwater, seawater, and soil matrix. Expression of V. natriegens recA in E. coli indicated a LexA-like regulator in V. natriegens, and the putative SOS box of V. natriegens recA was similar to that of E. coli. The genotoxicities of groundwater samples from a petrochemical-contaminated site in northern China were evaluated by this bioreporter assay, and the genotoxic levels were in accordance with contamination levels obtained by chemical analyses.

Use of Tunable Whole-Cell Bioreporters to Assess Bioavailable Cadmium and Remediation Performance in Soils

It is important to have tools to measure the bioavailability to assess the risks of pollutants because the bioavailability is defined as the portions of pollutants showing the biological effects on living organisms. This study described the construction of tunable Escherichia coli whole-cell bioreporter (WCB) using the promoter region of zinc-inducible operon and its application on contaminated soils. It was verified that this WCB system showed specific and sensitive responses to cadmium rather than zinc in the experimental conditions. It was inferred that Cd(II) associates stronger with ZntR, a regulatory protein of zinc-inducible operon, than other metal ions. Moreover, the expression of reporter genes, egfp and mcherry, were proportional to the concentration of cadmium, thereby being a quantitative sensor to monitor bioavailable cadmium. The capability to determine bioavailable cadmium was verified with Cd(II) amended LUFA soils, and then the applicability on environmental systems was investigated with field soils collected from smelter area in Korea before and after soil-washing. The total amount of cadmium was decreased after soil washing, while the bioavailability was increased. Consequently, it would be valuable to have tools to assess bioavailability and the effectiveness of soil remediation should be evaluated in the aspect of bioavailability as well as removal efficiency.

Evaluation of bioavailable arsenic and remediation performance using a whole-cell bioreporter

The traditional method of evaluating the effects of soil contaminants on living organisms by measuring the total amount of contaminant has been largely inadequate, in part because testing contamination levels is hindered in real samples. Here we report a novel strategy for testing arsenic (As) bioavailability in soil samples by direct (in vivo) and indirect (in vitro) measurement using an Escherichia coli-based whole-cell bioreporter (WCB). The WCB was used to test As-amended Landwirtschaftliche Untersuchungs und Forschungsanstalt soils as well as field soils collected from a smelter area under remediation in order to evaluate the efficiency of bioavailable As removal. The percentage of bioavailable As in amended and field soils was 5.8% (range: 4.9%-7.6%) and 0.6% (0.08%-1.09%) of total As, respectively. In contaminated soils, total As was decreased, whereas bioavailable As was slightly increased after soil washing. These results emphasize the importance of considering ecotoxicological aspects of soil remediation; to this end, the WCB is a useful tool for evaluating the efficiency of soil remediation by assessing bioavailability along with the total amount of contaminant present.

Toxicity Testing of Pristine and Aged Silver Nanoparticles in Real Wastewaters Using Bioluminescent Pseudomonas putida

Impact of aging on nanoparticle toxicity in real matrices is scarcely investigated due to a lack of suitable methodologies. Herein, the toxicity of pristine and aged silver nanoparticles (Ag NPs) to a bioluminescent Pseudomonas putida bioreporter was measured in spiked crude and final wastewater samples (CWs and FWs, respectively) collected from four wastewater treatment plants (WWTPs). Results showed lower toxicity of pristine Ag NPs in CWs than in FWs. The effect of the matrix on the eventual Ag NP toxicity was related to multiple physico-chemical parameters (biological oxygen demand (BOD), chemical oxygen demand (COD), total suspended solids (TSS) pH, ammonia, sulfide and chloride) based on a multivariate analysis. However, no collection site effect was concluded. Aged Ag NPs (up to eight weeks) were found less toxic than pristine Ag NPs in CWs; evident increased aggregation and decreased dissolution were associated with aging. However, Ag NPs exhibited consistent toxicity in FWs despite aging; comparable results were obtained in artificial wastewater (AW) simulating effluent. The study demonstrates the potency of performing nanoparticle acute toxicity testing in real and complex matrices such as wastewaters using relevant bacterial bioreporters.

Simultaneous detection of bioavailable arsenic and cadmium in contaminated soils using dual-sensing bioreporters

Whole-cell bioreporters (WCBs) have attracted increasing attention during the last few decades because they allow fast determination of bioavailable heavy metals in contaminated sites. Various WCBs to monitor specific heavy metals such as arsenic and cadmium in diverse environmental systems are available. However, currently, no study on simultaneous analysis of arsenic and cadmium has been reported, even though soils are contaminated by diverse heavy metals and metalloids. We demonstrated herein the development of dual-sensing WCBs to simultaneously quantify bioavailable arsenic and cadmium in contaminated sites by employing the promoter regions of the ars and znt operons as separate metal-sensing domains, and egfp and mcherry as reporter genes. The dual-sensing WCBs were generated by inserting two sets of genes into E. coli DH5α. The capability of WCBs was successfully proved to simultaneously quantify bioavailable arsenic and cadmium in amended Landwirtschaftliche Untersuchungs und Forschungsanstalt (LUFA) soils, and then, it was applied to contaminated field soils collected from a smelter area in Korea. As a result, it was noticed that the bioavailable portion of cadmium was higher than that of arsenic while the absolute amount of bioavailable arsenic and cadmium level was opposite. Since both cadmium and arsenic were assessed from the same E. coli cells, the data obtained by using dual-sensing WCBs would be more efficient and convenient than that from comparative WCB assay. In spite of advantageous aspects, to our knowledge, this is the first report on a dual-sensing WCB for rapid and concurrent quantification of bioavailable arsenic and cadmium in contaminated soils.

Arsenic bioavailability in soils before and after soil washing: the use of Escherichia coli whole-cell bioreporters

We investigated the quantification of bioavailable arsenic in contaminated soils and evaluation of soil-washing processes in the aspect of bioavailability using a novel bacterial bioreporter developed in present study. The whole-cell bioreporter (WCB) was genetically engineered by fusing the promoter of nik operon from Escherichia coli and green fluorescent protein as a sensing domain and reporter domain. Among eight well-known hazardous heavy metals and metalloid, this system responded specifically to arsenic, thereby inferring association of As(III) with NikR inhibits the repression. Moreover, the response was proportional to the concentration of As(III), thereby it was capable to determine the amount of bioavailable arsenic quantitatively in contaminated soils. The bioavailable portion of arsenic was 5.9 (3.46-10.96) and 0.9 (0.27-1.74) % of total from amended and site soils, respectively, suggesting the bioavailability of arsenic in soils was related to the soil properties and duration of aging. On the other hand, only 1.37 (0.21-2.97) % of total arsenic was extracted into soil solutions and 19.88 (11.86-28.27) % of arsenic in soil solution was bioavailable. This result showed that the soluble arsenic is not all bioavailable and most of bioavailable arsenic in soils is water non-extractable. In addition, the bioavailable arsenic was increased after soil-washing while total amount was decreased, thereby suggesting the soil-washing processes release arsenic associated with soil materials to be bioavailable. Therefore, it would be valuable to have a tool to assess bioavailability and the bioavailability should be taken into consideration for soil remediation plans.

Measurement of Bacterial Bioluminescence Intensity and Spectrum: Current Physical Techniques and Principles

: Bioluminescence is light production by living organisms, which can be observed in numerous marine creatures and some terrestrial invertebrates. More specifically, bacterial bioluminescence is the "cold light" produced and emitted by bacterial cells, including both wild-type luminescent and genetically engineered bacteria. Because of the lively interplay of synthetic biology, microbiology, toxicology, and biophysics, different configurations of whole-cell biosensors based on bacterial bioluminescence have been designed and are widely used in different fields, such as ecotoxicology, food toxicity, and environmental pollution. This chapter first discusses the background of the bioluminescence phenomenon in terms of optical spectrum. Platforms for bacterial bioluminescence detection using various techniques are then introduced, such as a photomultiplier tube, charge-coupled device (CCD) camera, micro-electro-mechanical systems (MEMS), and complementary metal-oxide-semiconductor (CMOS) based integrated circuit. Furthermore, some typical biochemical methods to optimize the analytical performances of bacterial bioluminescent biosensors/assays are reviewed, followed by a presentation of author's recent work concerning the improved sensitivity of a bioluminescent assay for pesticides. Finally, bacterial bioluminescence as implemented in eukaryotic cells, bioluminescent imaging, and cancer cell therapies is discussed.

A sensitive whole-cell biosensor for the simultaneous detection of a broad-spectrum of toxic heavy metal ions

Bacterial biosensors are simple, cost-effective and efficient analytical tools for detecting bioavailable heavy metals in the environment. This work presents the design, construction and calibration of a novel whole-cell fluorescent biosensory device that, simultaneously and with high sensitivity, reports the presence of toxic mercury, lead, cadmium and/or gold ions in aqueous samples. This bio-reporter can be easily applied as an immediate alerting tool for detecting the presence of harmful pollutants in drinking water.

Aged TiO2-based nanocomposite used in sunscreens produces singlet oxygen under long-wave UV and sensitizes Escherichia coli to cadmium

TiO2-based nanocomposite (NC) are widely used as invisible UV protectant in cosmetics. These nanomaterials (NMs) end in the environment as altered materials. We have investigated the properties of T-Lite SF, a TiO2-NC used as sunscreen, after weathering in water and under light. We have examined the formation of ROS and their consequences on cell physiology of Escherichia coli. Our results show that aged-T-Lite SF produced singlet oxygen under low intensity long wave UV and formed hydroxyl radicals at high intensity. Despite the production of these ROS, T-Lite SF had neither effect on the viability of E. coli nor on mutant impaired in oxidative stress, did not induce mutagenesis and did not impair the integrity of membrane lipids, thus seemed safe to bacteria. However, when pre-exposed to T-Lite SF under low intensity UV, cells turned out to be more sensitive to cadmium, a priority pollutant widely disseminated in soil and surface waters. This effect was not a Trojan horse: sensitization of cells was dependent on the formation of singlet oxygen. These results provide a basis for caution, especially on NMs that have no straight environmental toxicity. It is crucial to anticipate indirect and combined effects of environmental pollutants and NMs.

New quaternary ammonium camphor derivatives and their antiviral activity, genotoxic effects and cytotoxicity

The synthesis and biological evaluation of a novel series of dimeric camphor derivatives are described. The resulting compounds were studied for their antiviral activity, cyto- and genotoxicity. Compounds 3a and 3d in which the quaternary nitrogen atoms are separated by the C5H10 and С9H18 aliphatic chain, exhibited the highest efficiency as an agent inhibiting the reproduction of the influenza virus A(H1N1)pdm09. The cytotoxicity data of compounds 3 and 4 revealed their moderate activity against malignant cell lines; compound 3f had the highest activity for the CEM-13 cells. These results show close agreement with the data of independent studies on toxicity of these compounds, in particular that the toxicity of compounds strongly depends on spacer length.

Bioluminescence enhancement through an added washing protocol enabling a greater sensitivity to carbofuran toxicity

The effects of carbofuran toxicity on a genetically modified bacterial strain E. coli DPD2794 were enhanced using a new bioluminescent protocol which consisted of three consecutive steps: incubation, washing and luminescence reading. Specifically, in the first step, several concentrations of carbofuran aqueous solutions were incubated with different bacterial suspensions at recorded optical densities for different lengths of time. Thereafter, the resulting bacterial/toxicant mixtures were centrifuged and the aged cellular supernatant replaced with fresh medium. In the final step, the carbofuran- induced bioluminescence to the exposed E. coli DPD2794 bacteria was shown to provide a faster and higher intensity when recorded at a higher temperature at30°C which is not usually used in the literature. It was found that the incubation time and the replacement of aged cellular medium were essential factors to distinguish different concentrations of carbofuran in the bioluminescent assays. From our results, the optimum incubation time for a "light ON" bioluminescence detection of the effect of carbofuran was 6h. Thanks to the replacement of the aged cellular medium, a group of additional peaks starting around 30min were observed and we used the corresponding areas under the curve (AUC) at different contents of carbofuran to produce the calibration curve. Based on the new protocol, a carbofuran concentration of 0.5pg/mL can be easily determined in a microtiter plate bioluminescent assay, while a non-wash protocol provides an unexplainable order of curve evolutionswhich does not allow the user to determine the concentration.

Genetically modified whole-cell bioreporters for environmental assessment

Living whole-cell bioreporters serve as environmental biosentinels that survey their ecosystems for harmful pollutants and chemical toxicants, and in the process act as human and other higher animal proxies to pre-alert for unfavorable, damaging, or toxic conditions. Endowed with bioluminescent, fluorescent, or colorimetric signaling elements, bioreporters can provide a fast, easily measured link to chemical contaminant presence, bioavailability, and toxicity relative to a living system. Though well tested in the confines of the laboratory, real-world applications of bioreporters are limited. In this review, we will consider bioreporter technologies that have evolved from the laboratory towards true environmental applications, and discuss their merits as well as crucial advancements that still require adoption for more widespread utilization. Although the vast majority of environmental monitoring strategies rely upon bioreporters constructed from bacteria, we will also examine environmental biosensing through the use of less conventional eukaryotic-based bioreporters, whose chemical signaling capacity facilitates a more human-relevant link to toxicity and health-related consequences.

Portable self-contained cultures for phage and bacteria made of paper and tape

In this paper, we demonstrate that a functional, portable device for the growth of bacteria or amplification of bacteriophage can be created using simple materials. These devices are comprised of packing tape, sheets of paper patterned by hydrophobic printer ink, and a polydimethyl siloxane (PDMS) membrane, which is selectively permeable to oxygen but non-permeable to water. These devices supply bacteria with oxygen and prevent the evaporation of media for a period over 48 h. The division time of E. coli and the amplification of the phage M13 in this device are similar to the rates measured on agar plates and in shaking cultures. The growth of bacteria with a fluorescent mCherry reporter can be quantified using a flatbed scanner or a cell phone camera. Permeating devices with commercial viability dye (PrestoBlue) can be used to detect low copy number of E. coli (1-10 CFU in 100 μL) and visualize microorganisms in environmental samples. The platform, equipped with bacteria that carry inducible mCherry reporter could also be used to quantify the concentration of the inducer (here, arabinose). Identical culture platforms can, potentially, be used to quantify the induction of gene expression by an engineered phage or by synthetic transcriptional regulators that respond to clinically relevant molecules. The majority of measurement and fabrication procedures presented in this report have been replicated by low-skilled personnel (high-school students) in a low-resource environment (high-school classroom). The fabrication and performance of the device have also been tested in a low-resource laboratory setting by researchers in Nairobi, Kenya. Accordingly, this platform can be used as both an educational tool and as a diagnostic tool in low-resource environments worldwide.

Construction and application of an Escherichia coli bioreporter for aniline and chloroaniline detection

Aniline and chlorinated anilines (CAs) are classified as priority pollutants; therefore, an effective method for detection and monitoring is required. In this study, a green-fluorescence protein-based bioreporter for the detection of aniline and CAs was constructed in Escherichia coli DH5α, characterized and tested with soil and wastewater. The sensing capability relied on the regulatory control between a two-component regulatory protein, TodS/TodT, and the P( todX ) promoter of Pseudomonas putida T-57 (PpT57), since the gene expression of todS, todT, and todC2 are positively induced with 4-chloroaniline. The bioreporter system (DH5α/pPXGFP-pTODST) is markedly unique with the two co-existing plasmids. The inducibility of the fluorescence response was culture-medium- and time-dependent. Cells grown in M9G medium exhibited a low background fluorescence level and were readily induced by 4CA after 3-h exposure, reaching the maximum induction level at 9 h. When tested with benzene, toluene, ethyl-benzene and xylene, aniline and CAs, the response data were best fit by a sigmoidal dose-response relationship, from which the K(½) value was determined for the positive effectors. 3CA and 4CA were relatively powerful inducers, while some poly-chlorinated anilines could also induce green fluorescence protein expression. The results indicated a broader recognition range of PpT57'sTodST than previously reported for P. putida. The test results with environmental samples were reliable, indicating the potential application of this bioreporter in the ecotoxicology assessment and bioremediation of areas contaminated with aniline- and/or CAs.

Genetic Programming as a tool for identification of analyte-specificity from complex response patterns using a non-specific whole-cell biosensor

Whole-cell biosensors are mostly non-specific with respect to their detection capabilities for toxicants, and therefore offering an interesting perspective in environmental monitoring. However, to fully employ this feature, a robust classification method needs to be implemented into these sensor systems to allow further identification of detected substances. Substance-specific information can be extracted from signals derived from biosensors harbouring one or multiple biological components. Here, a major task is the identification of substance-specific information among considerable amounts of biosensor data. For this purpose, several approaches make use of statistical methods or machine learning algorithms. Genetic Programming (GP), a heuristic machine learning technique offers several advantages compared to other machine learning approaches and consequently may be a promising tool for biosensor data classification. In the present study, we have evaluated the use of GP for the classification of herbicides and herbicide classes (chemical classes) by analysis of substance-specific patterns derived from a whole-cell multi-species biosensor. We re-analysed data from a previously described array-based biosensor system employing diverse microalgae (Podola and Melkonian, 2005), aiming on the identification of five individual herbicides as well as two herbicide classes. GP analyses were performed using the commercially available GP software 'Discipulus', resulting in classifiers (computer programs) for the binary classification of each individual herbicide or herbicide class. GP-generated classifiers both for individual herbicides and herbicide classes were able to perform a statistically significant identification of herbicides or herbicide classes, respectively. The majority of classifiers were able to perform correct classifications (sensitivity) of about 80-95% of test data sets, whereas the false positive rate (specificity) was lower than 20% for most classifiers. Results suggest that a higher number of data sets may lead to a better classification performance. In the present paper, GP-based classification was combined with a biosensor for the first time. Our results demonstrate GP was able to identify substance-specific information within complex biosensor response patterns and furthermore use this information for successful toxicant classification in unknown samples. This suggests further research to assess perspectives and limitations of this approach in the field of biosensors.

Analytical strategies for improving the robustness and reproducibility of bioluminescent microbial bioreporters

Whole-cell bioluminescent (BL) bioreporter technology is a useful analytical tool for developing biosensors for environmental toxicology and preclinical studies. However, when applied to real samples, several methodological problems prevent it from being widely used. Here, we propose a methodological approach for improving its analytical performance with complex matrix. We developed bioluminescent Escherichia coli and Saccharomyces cerevisiae bioreporters for copper ion detection. In the same cell, we introduced two firefly luciferases requiring the same luciferin substrate emitting at different wavelengths. The expression of one was copper ion specific. The other, constitutively expressed, was used as a cell viability internal control. Engineered BL cells were characterized using the noninvasive gravitational field-flow fractionation (GrFFF) technique. Homogeneous cell population was isolated. Cells were then immobilized in a polymeric matrix improving cell responsiveness. The bioassay was performed in 384-well black polystyrene microtiter plates directly on the sample. After 2 h of incubation at 37 °C and the addition of the luciferin, we measured the emitted light. These dual-color bioreporters showed more robustness and a wider dynamic range than bioassays based on the same strains with a single reporter gene and that uses a separate cell strain as BL control. The internal correction allowed to accurately evaluate the copper content even in simulated toxic samples, where reduced cell viability was observed. Homogenous cells isolated by GrFFF showed improvement in method reproducibility, particularly for yeast cells. The applicability of these bioreporters to real samples was demonstrated in tap water and wastewater treatment plant effluent samples spiked with copper and other metal ions.

Selection of scFv phages specific for chloramphenicol acetyl transferase (CAT), as alternatives for antibodies in CAT detection assays

Reporter gene assays are commonly used in applied toxicology to measure the transcription of genes involved in toxic responses. In these reporter gene assays, transgenic cells are used, which contain a promoter-operator region of a gene of interest fused to a reporter gene. The transcription of the gene of interest can be measured by the detection of the reporter protein. Chloramphenicol acetyl transferase (CAT) is frequently used as a reporter protein in mammalian reporter gene assays. Although CAT can be measured by different detection systems, like enzymatic and immune assays, most of these tests are expensive, time-consuming and labor-intensive. The excellent characteristics of phages, like their high affinity and specificity, their fast, cheap and animal-friendly manufacturing process with low batch-to-batch variations and their stability, make them appropriate as alternatives for antibodies in detection assays. Therefore, in this study single-chain variable fragment (scFv) phages were selected with affinity for CAT. Several scFv phages were selected that showed affinity towards CAT in a screening ELISA. Surface plasmon resonance analyses showed that the tested scFv phages have an affinity for CAT with a dissociation constant (K(d)) around 1 µM. The selected scFv phages in this study could be used as capture elements in a highly sensitive sandwich ELISA to detect CAT concentration as low as 0.1 ng ml⁻¹ or 4 pM. This low detection limit demonstrates the potential of the scFv phages as an alternative for capturing antibodies in a highly sensitive detection test to measure CAT concentrations in reporter gene assays.