Alginate beads provide a beneficial physical barrier against native microorganisms in wastewater treated with immobilized bacteria and microalgae

Light management by algal aggregates in living photosynthetic hydrogels

Rapid progress in algal biotechnology has triggered a growing interest in hydrogel-encapsulated microalgal cultivation, especially for the engineering of functional photosynthetic materials and biomass production. An overlooked characteristic of gel-encapsulated cultures is the emergence of cell aggregates, which are the result of the mechanical confinement of the cells. Such aggregates have a dramatic effect on the light management of gel-encapsulated photobioreactors and hence strongly affect the photosynthetic outcome. To evaluate such an effect, we experimentally studied the optical response of hydrogels containing algal aggregates and developed optical simulations to study the resultant light intensity profiles. The simulations are validated experimentally via transmittance measurements using an integrating sphere and aggregate volume analysis with confocal microscopy. Specifically, the heterogeneous distribution of cell aggregates in a hydrogel matrix can increase light penetration while alleviating photoinhibition more effectively than in a flat biofilm. Finally, we demonstrate that light harvesting efficiency can be further enhanced with the introduction of scattering particles within the hydrogel matrix, leading to a fourfold increase in biomass growth. Our study, therefore, highlights a strategy for the design of spatially efficient photosynthetic living materials that have important implications for the engineering of future algal cultivation systems.

Development of a flow-cell bioreactor for immobilized sulfidogenic sludge characterization using electrochemical H2S microsensors

The sulfate-reduction process plays a crucial role in the biological valorization of SOx gases. However, a complete understanding of the sulfidogenic process in bioreactors is limited by the lack of technologies for characterizing the sulfate-reducing activity of immobilized biomass. In this work, we propose a flow-cell bioreactor (FCB) for characterizing sulfate-reducing biomass using H2S microsensors to monitor H2S production in real-time within a biofilm. To replace natural immobilization through extracellular polymeric substance production, sulfidogenic sludge was artificially immobilized using polymers. Physical and sulfate-reducing activity studies were performed to select a polymer-biomass matrix that maintained sulfate-reducing activity of biomass while providing strong microbial retention and mechanical strength. Several operational conditions of the sulfidogenic reactor allowed to obtain a H2S profiles under different inlet sulfate loads and, additionally, 3D mapping was assessed in order to perform a hydraulic characterization. Besides, the effects of artificial immobilization on biodiversity were investigated through the characterization of microbial communities. This study demonstrated the appropriateness of immobilized-biomass for characterization of sulfidogenic biomass in FCB using H2S electrochemical microsensors, and beneficial microbiological communities shifts as well as enrichment of sulfate-reducing bacteria have been confirmed.

Biodegradation of Phenol Using the Indigenous Rhodococcus pyridinivorans Strain PDB9T NS-1 Immobilized in Calcium Alginate Beads

Phenolic compounds are the major contaminants identified from various industrial effluents, which pose an extreme threat to the environment. Therefore, investigating an effective technique to remove these toxic phenolic compounds from the contaminated environment is very essential. In the present investigation, batch tests were performed to assess the biodegradation of phenol using an indigenous Rhodococcus pyridinivorans strain PDB9T NS-1 encapsulated in a calcium alginate bead system. In order to improve the mechanical stability, silica was added to the cell-embedded Ca-alginate beads. The impact of experimental conditions such as contact time, pH, and initial phenol doses was investigated. The biodegradation of phenol was examined over a wide range of phenol, and the results showed that more than 99.6% degradation was achieved at an initial phenol dose of 1000 mg/L in 70 h at 30 °C. Among the various sorption isotherm tested, the Freundlich isotherm was the best fitted to the experimental data. This behavior indicated a multilayer biosorption process and was controlled by heterogeneous surface energy. Based on an intra-particle diffusion model, internal mass transfer or pore diffusion predominated over exterior mass transfer in controlling the entire phenol biosorption process. The biosorption of phenol onto the cell encapsulated in the Ca-alginate bead follows pseudo-first-order kinetics with a superior phenol biosorption capacity of 155 mg/g of Ca-alginate. Further stability study revealed that the bead could be recycled successfully without any substantial decline in phenol degradation efficiency, indicating that the immobilized microbe possesses exceptional operating stability.

An effective strategy for biodegradation of high concentration phenol in soil via biochar-immobilized Rhodococcus pyridinivorans B403

High concentration of phenol residues in soil are harmful to human health and ecological safety. However, limited information is available on the in-situ bioremediation of phenol-contaminated soil using biochar as a carrier for bacteria. In this study, bamboo -derived biochar was screened as a carrier to assemble microorganism-immobilized composite with Rhodococcus pyridinivorans B403. Then, SEM used to observe the micromorphology of composite and its bioactivity was detected in solution and soil. Finally, we investigated the effects of free B403 and biochar-immobilized B403 (BCJ) on phenol biodegradation in two types of soils and different initial phenol concentrations. Findings showed that bacterial cells were intensively distributed in/onto the carriers, showing high survival. Immobilisation increased the phenol degradation rate of strain B403 by 1.45 times (37.7 mg/(L·h)). The phenol removed by BCJ in soil was 81% higher than free B403 on the first day. Moreover, the removal of BCJ remained above 51% even at phenol concentration of 1,500 mg/kg, while it was only 15% for free B403. Compared with the other treatment groups, BCJ showed the best phenol removal effect in both tested soils. Our results indicate that the biochar-B403 composite has great potential in the remediation of high phenol-contaminated soil.

In situ chlorpyrifos (CPF) degradation by Acrobeloides maximus: Insights from chromatographic analysis

The objective of this study was to evaluate the efficiency of nematodes in zooremediation of chlorpyrifos (CPF), an organophosphate pesticide. The nematode population Acrobeloides maximus (A. maximus) was employed for bioremediation, converting CPF into non-toxic residues. Optimal growth conditions for mass production of A. maximus were achieved by maintaining a temperature of 25 °C, pH 8, and supplementing the culture medium with plant nutrients. The nematodes were then immobilized within sodium alginate beads. The efficacy of the degradation process was assessed using various analytical techniques, including UV-Visible spectroscopy, HPTLC, FTIR, and LC-MS, confirming the successful breakdown of CPF. The bioreactor demonstrated a complete degradation efficiency of CPF exceeding 99%. Additionally, LC-MS analysis was conducted to elucidate the degradation pathway based on the formation of intermediates. These results underscore the potential of A. maximus as a sustainable organism for addressing environmental contamination arising from CPF pesticide.

Alginate-based composites as novel soil conditioners for sustainable applications in agriculture: A critical review

The development of alginate-based composites in agriculture to combat nutrient loss and drought for sustainable development has drawn increasing attention in the scientific community. Existing studies are however scattered, and the retention and slow-release mechanisms of alginate-based composites are not well understood. This paper systematically reviews the current literature on the preparation, characterization, and agricultural applications of various alginate-based composites. The synthesis methods of alginate-based composites are firstly summarized, followed by a review of available analytical techniques to characterize alginate-based composites for the attainment of their desired performance. Secondly, the performance and controlling factors for agricultural applications of alginate-based composites are discussed, including aquasorb, slow-release fertilizer, soil amendment, microbial inoculants, and controlled release of pesticides for pest management. Finally, suggestions and future perspectives are proposed to expand the applications of alginate-based composites for sustainable agriculture.

Assessment of the efficiency of immobilized degrading microorganisms in removing the organochlorine pesticide residues from agricultural soils

To investigate the removal of organochlorine pesticide residues by immobilized degrading microbe, indigenous microorganisms from organochlorine pesticide (OCP)-contaminated soils in Chengdu plain, pot experiments were carried out to evaluate the potential of the immobilized complex microbial specific degrading microbe treated with sodium alginate (SA) composite carrier in decontaminating OCP-contaminated soils, and field experiments were also conducted to investigate the enhanced efficiency of immobilized microbial agents on the dissipation of OCPs in the contaminated plots for different cultivation usage. The results showed that the dissipation rate of OCPs in contaminated soils with initial concentrations of 122.24 μg/kg was 89.94% after the addition of 25 mg of immobilized microbial agents at the end of the 90 days of experiment, which was 6.1% higher than that of the compound microbial agents under the same environmental conditions, and the control group without the addition of microbial agents was only 1.18%, while the concentration of OCPs in contaminated soils with initial concentrations of 203.64 μg/kg only decreased to 65.29 μg/kg after the addition of 20 mg of compound microbial agents. In contrast, the soil concentration of immobilized microbial agent treatment group under the same conditions decreased to 52.15 μg/kg. During the field experiment, the enhanced efficiency of immobilized microbial agents on the degradation of OCPs in different cultivation usage was evidently different, showed that the concentration of OCPs in paddy fields (18.60%) > tea gardens (12.17%) ≥ orchards (11.41%) > vegetable fields (6.21%) ≥ dryland (4.79%), which was especially significant in stress environment. Overall, the immobilization treatment obviously improved the degradation potential of OCPs-specific degrading microbe, and the degree of improvement was related to the metabolic activity of the degrading microbe, the addition amount, remediation time, and habitat conditions.

Microalgal co-cultivation -recent methods, trends in omic-studies, applications, and future challenges

The burgeoning human population has resulted in an augmented demand for raw materials and energy sources, which in turn has led to a deleterious environmental impact marked by elevated greenhouse gas (GHG) emissions, acidification of water bodies, and escalating global temperatures. Therefore, it is imperative that modern society develop sustainable technologies to avert future environmental degradation and generate alternative bioproduct-producing technologies. A promising approach to tackling this challenge involves utilizing natural microbial consortia or designing synthetic communities of microorganisms as a foundation to develop diverse and sustainable applications for bioproduct production, wastewater treatment, GHG emission reduction, energy crisis alleviation, and soil fertility enhancement. Microalgae, which are photosynthetic microorganisms that inhabit aquatic environments and exhibit a high capacity for CO2 fixation, are particularly appealing in this context. They can convert light energy and atmospheric CO2 or industrial flue gases into valuable biomass and organic chemicals, thereby contributing to GHG emission reduction. To date, most microalgae cultivation studies have focused on monoculture systems. However, maintaining a microalgae monoculture system can be challenging due to contamination by other microorganisms (e.g., yeasts, fungi, bacteria, and other microalgae species), which can lead to low productivity, culture collapse, and low-quality biomass. Co-culture systems, which produce robust microorganism consortia or communities, present a compelling strategy for addressing contamination problems. In recent years, research and development of innovative co-cultivation techniques have substantially increased. Nevertheless, many microalgae co-culturing technologies remain in the developmental phase and have yet to be scaled and commercialized. Accordingly, this review presents a thorough literature review of research conducted in the last few decades, exploring the advantages and disadvantages of microalgae co-cultivation systems that involve microalgae-bacteria, microalgae-fungi, and microalgae-microalgae/algae systems. The manuscript also addresses diverse uses of co-culture systems, and growing methods, and includes one of the most exciting research areas in co-culturing systems, which are omic studies that elucidate different interaction mechanisms among microbial communities. Finally, the manuscript discusses the economic viability, future challenges, and prospects of microalgal co-cultivation methods.

Microalgal and Nitrogen-Fixing Bacterial Consortia: From Interaction to Biotechnological Potential

Microalgae are used in various biotechnological processes, such as biofuel production due to their high biomass yields, agriculture as biofertilizers, production of high-value-added products, decontamination of wastewater, or as biological models for carbon sequestration. The number of these biotechnological applications is increasing, and as such, any advances that contribute to reducing costs and increasing economic profitability can have a significant impact. Nitrogen fixing organisms, often called diazotroph, also have great biotechnological potential, mainly in agriculture as an alternative to chemical fertilizers. Microbial consortia typically perform more complex tasks than monocultures and can execute functions that are challenging or even impossible for individual strains or species. Interestingly, microalgae and diazotrophic organisms are capable to embrace different types of symbiotic associations. Certain corals and lichens exhibit this symbiotic relationship in nature, which enhances their fitness. However, this relationship can also be artificially created in laboratory conditions with the objective of enhancing some of the biotechnological processes that each organism carries out independently. As a result, the utilization of microalgae and diazotrophic organisms in consortia is garnering significant interest as a potential alternative for reducing production costs and increasing yields of microalgae biomass, as well as for producing derived products and serving biotechnological purposes. This review makes an effort to examine the associations of microalgae and diazotrophic organisms, with the aim of highlighting the potential of these associations in improving various biotechnological processes.

Deciphering mechanisms of production of natural compounds using inducer-producer microbial consortia

Living organisms produce a wide range of metabolites. Because of their potential antibacterial, antifungal, antiviral, or cytostatic properties, such natural molecules are of high interest to the pharmaceutical industry. In nature, these metabolites are often synthesized via secondary metabolic biosynthetic gene clusters that are silent under the typical culturing conditions. Among different techniques used to activate these silent gene clusters, co-culturing of "producer" species with specific "inducer" microbes is a particularly appealing approach due to its simplicity. Although several "inducer-producer" microbial consortia have been reported in the literature and hundreds of different secondary metabolites with attractive biopharmaceutical properties have been described as a result of co-cultivating inducer-producer consortia, less attention has been devoted to the understanding of the mechanisms and possible means of induction for production of secondary metabolites in co-cultures. This lack of understanding of fundamental biological functions and inter-species interactions significantly limits the diversity and yield of valuable compounds using biological engineering tools. In this review, we summarize and categorize the known physiological mechanisms of production of secondary metabolites in inducer-producer consortia, and then discuss approaches that could be exploited to optimize the discovery and production of secondary metabolites.

Immobilized microalgal system: An achievable idea for upgrading current microalgal wastewater treatment

Efficient wastewater treatment accompanied by sustainable "nutrients/pollutants waste-wastewater-resources/energy nexus" management is acting as a prominent and urgent global issue since severe pollution has occurred increasingly. Diverting wastes from wastewater into the value-added microalgal-biomass stream is a promising goal using biological wastewater treatment technologies. This review proposed an idea of upgrading the current microalgal wastewater treatment by using immobilized microalgal system. Firstly, a systematic analysis of microalgal immobilization technology is displayed through an in-depth discussion on why using immobilized microalgae for wastewater treatment. Subsequently, the main technical approaches employed for microalgal immobilization and pollutant removal mechanisms by immobilized microalgae are summarized. Furthermore, from high-tech technologies to promote large-scale production and application potentials in diverse wastewater and bioreactors to downstream applications lead upgradation closer, the feasibility of upgrading existing microalgal wastewater treatment into immobilized microalgal systems is thoroughly discussed. Eventually, several research directions are proposed toward the future immobilized microalgal system for microalgal wastewater treatment upgrading. Together, it appears that using immobilization for further upgrading the microalgae-based wastewater treatment can be recognized as an achievable alternative to make microalgal wastewater treatment more realistic. The information and perspectives provided in this review also offer a feasible reference for upgrading conventional microalgae-based wastewater treatment.

Mechanistic behaviour of Chlorella vulgaris biofilm formation onto waste organic solid support used to treat palm kernel expeller in the recent Anthropocene

The capacity to maximize the proliferation of microalgal cells by means of topologically textured organic solid surfaces under various pH gave rise to the fundamental biophysical analysis of cell-surface attachment in this study. The substrate used in analysis was palm kernel expeller (PKE) in which the microalgal cells had adhered onto its surface. The findings elucidated the relevance of surface properties in terms of surface wettability and surface energy in relation to the attached microalgal growth with pH as the limiting factor. The increase in hydrophobicity of PKE-microalgae attachment was able to facilitate the formation of biofilm better. The pH 5 and pH 11 were found to be the conditions with highest and lowest microalgal growths, respectively, which were in tandem with the highest contact angle value at pH 5 and conversely for pH 11. The work of attachment (W_cs) had supported the derived model with positive values being attained for all the pH conditions, corroborating the thermodynamic feasibility. Finally, this study had unveiled the mechanism of microalgal attachment onto the surface of PKE using the aid of extracellular polymeric surfaces (EPS) from microalgae. Also, the hydrophobic nature of PKE enabled excellent attachment alongside with nutrients for microalgae to grow and from layer-by-layer (LbL) assembly. This assembly was then isolated using organosolv method by means of biphasic solvents, namely, methanol and chloroform, to induce detachment.

Overexpression of the sulfate transporter-encoding SULTR2 increases chromium accumulation in Chlamydomonas reinhardtii

Hexavalent chromium [Cr(Ⅵ)] is a highly toxic contaminant in aquatic systems, and microalgae represent promising bioremediators of metal-containing wastewater. However, the metal-binding capacity of algal cells is limited. Therefore, we improved the cellular Cr(Ⅵ) biosorption capacity of Chlamydomonas reinhardtii by overexpressing the sulfate transporter gene SULTR2. SULTR2 was predominantly located in the cytoplasm of the cell, and few proteins mobilized to the cell membrane as a Cr transporter under Cr stress conditions. Intracellular Cr accumulation was almost doubled in SULTR2-overexpressing transgenic strains after exposure to 30 μM K₂ Cr₂ O₇ for 4 d. Alginate-based immobilization increased the rate of Cr removal from 43.81% to 88.15% for SULTR2-overexpressing transgenic strains after exposure to 10 μM K₂ Cr₂ O₇ for 6 d. The immobilized cells also displayed a significant increase in nutrient removal efficiency compared to that of free-swimming cells. Therefore, SULTR2 overexpression in algae has a great potential for the bioremediation of Cr(Ⅵ)-containing wastewater.

A review on the sustainable procurement of microalgal biomass from wastewaters for the production of biofuels

The feasibility of microalgal biomass as one of the most promising and renewable sources for the production of biofuels is being studied extensively. Microalgal biomass can be cultivated under photoautotrophic, heterotrophic, photoheterotrophic, and mixotrophic cultivation conditions. Photoautotrophic cultivation is the most common way of microalgal biomass production. Under mixotrophic cultivation, microalgae can utilize both organic carbon and CO2 simultaneously. Mixotrophic cultivation depicts higher biomass productivity as compared to photoautotrophic cultivation. It is evident from the literature that mixotrophic cultivation yields higher quantities of polyunsaturated fatty acids as compared to that photoautotrophic cultivation. In this context, for economical biomass production, the organic carbon of industrial wastewaters can be valorized for the mixotrophic cultivation of microalgae. Following the way, contaminants' load of wastewaters can be reduced while concomitantly producing highly productive microalgal biomass. This review focuses on different aspects covering the sustainable cultivation of different microalgal species in different types of wastewaters.

Advancement on mixed microalgal-bacterial cultivation systems for nitrogen and phosphorus recoveries from wastewater to promote sustainable bioeconomy

Biological wastewater treatment is a promising and environmentally friendly method that utilises living microorganisms to remediate water and enable recovery or conversion of contaminants into valuable products. For many decades, microalgae and cyanobacteria, photosynthetic living microorganisms, have been explored extensively for wastewater bioremediation. They can be used for recovering valuable nutrients such as nitrogen and phosphorous from secondary effluents and capable of transforming those nutrients into marketable products such as biofuels, biofertilisers, nutraceutical, and pigments for promoting a Bio-Circular Green economy. In recent years, there has been a shift towards mixing compatible microalgae with bacteria, which is inspired by their natural symbiotic relationships to increase nitrogen and phosphorus recoveries. With this enhanced bioremediation, recovery of polluted wastes can be intensified and higher biomass quality (with high nutrient density) can be achieved. This review focuses on the state-of-the-art of mixed microalgal-bacterial cultivating systems. A comprehensive comparison of existing studies that used Chlorella species as microalgae in various mixed microalgal-bacterial cultivating systems (suspension, biofilm, and immobilisation) for nitrogen and phosphorus recoveries from wastewater is conducted. Key technical challenges such as balancing microalgae and bacteria species, pH regulation, light distribution, biomass harvesting, and biomass conversion are also discussed. From the data comparisons among different cultivation systems, it has been suggested that immobilisation appears to require less amount of operational light compared to the suspended and biofilm-based systems for similar nitrogen and phosphorus removal efficiencies.

Evaluation of Heavy Metal Removal of Nanoparticles Based Adsorbent Using Danio rerio as Model

Nanoparticles are potential candidates for wastewater treatment especially for the removal of heavy metals due to their strong affinity. Many biopolymers are used as adsorbents and encapsulation of nanoparticle onto them can increase their efficiency. In this study, SPIONs, alginate, and SPIONs incorporated on alginate beads have been synthesized and characterized both microscopically and spectroscopically. These were then used for the removal of chromium metal and the percentage of removal was evaluated using a batch adsorption study. The percent removal of chromium using SPIONs, alginate and alginate-SPIONs beads were recorded to be 93%, 91% and 94%, respectively. The adsorption of chromium using SPIONs and alginate-SPIONs beads followed the Tempkin isotherm, whereas adsorption of chromium metal by alginate beads was found to be homogeneous in nature and followed the Langmuir isotherm with an R² value of 0.9784. An in-vivo study using Danio rerio as a model organism was done to examine the toxicity and the removal efficiency of the samples. It was observed that chromium water treated with alginate-SPIONs beads, which were removed after water treatment showed less damage to the fishes when compared to SPIONs and alginate beads treated with chromium water where the SPIONs and alginate beads were not removed after the treatment period.

Glycerol Waste to Bio-Ethanol: Optimization of Fermentation Parameters by the Taguchi Method

Global attention caused by pollutants and greenhouse gas emissions leads to alternative fuels that decrease the dependence on fossil fuels and reduce the carbon footprint that preceded the development of biodiesel production. Glycerol residue is generated more significantly from the biodiesel industry as a byproduct and is left as waste. In this study, we utilized glycerol residue from the biodiesel industry as an excellent opportunity to convert ethanol by bioconversion. The waste glycerol was used as a good and cheap carbon source as a substrate to synthesize ethanol by immobilizing E. coli cells. The screening of parameters such as mass substrate, temperature, inoculum size, and fermentation time was carried out using the one-factor-at-a-time (OFAT) technique. The Taguchi model employed optimization of fermentation parameters. The process parameters showed the mass substrate glycerol of 20 g with an inoculum size of 20%, and 12 hours yielded the ethanol concentration of 10.0 g/L.

Review and Perspectives of the Use of Alginate as a Polymer Matrix for Microorganisms Applied in Agro-Industry

Alginate is a polysaccharide with the property of forming hydrogels, which is economic production, zero toxicity, and biocompatibility. In the agro-industry, alginate is used as a super absorbent polymer, coating seeds, fruits, and vegetables and as a carrier of bacteria and fungi as plant-growth promoters and biocontrol. The latter has a high impact on agriculture since the implementation of microorganisms in a polymer matrix improves soil quality; plant nutrition, and is functional as a preventive measure for the appearance of phytopathogenic. Additionally, it minimizes losses of foods due to wrong post-harvest handling. In this review, we provide an overview of physicochemical properties of alginate, some methods for preparation and modification of capsules and coatings, to finally describe its application in agro-industry as a matrix of plant-growth-promoting microorganisms, its effectiveness in cultivation and post-harvest, and its effect on the environment, as well as the prospects for future agro-industrial applications.

Quorum quenching of autoinducer 2 increases methane production in anaerobic digestion of waste activated sludge

The ubiquitous signaling molecule autoinducer 2 (AI-2) is involved in intra- and interspecies communication, most notably between Gram-negative and Gram-positive bacteria. AI-2 accumulates during the exponential phase of the Escherichia coli (E. coli) monoculture and then rapidly decreases upon entry into the stationary phase. However, deleting both the genes encoding AI-2 synthase (LuxS) and the lsr operon regulator (LsrR) in the E. coli genome causes impaired AI-2 production and continuous AI-2 scavenging from the environment. This genetically-engineered E. coli mutant capable of quenching AI-2 quorum sensing (QS) system was utilized to evaluate the effect of AI-2 quenching on the anaerobic digestion of waste activated sludge (WAS) because the role of QS system via AI-2 in the process remains obscure. In this study, E. coli ∆luxS lsrR mutant cells were microencapsulated in sodium alginate beads and incubated with WAS anaerobically. After 15 days of anaerobic fermentation, the WAS containing double mutant cells produced significantly more methane than that of the parent E. coli cells. AI-2 quenching occurred concurrently with a shift of microbial communities that contribute to increasing acetate consumption by the Methanosarcina spp. resulting in an increase in methane production. KEY POINTS: • Impact of autoinducer 2 quenching in complex bacterial populations were determined. • Key microorganisms contributing to the increase of methane in WAS anaerobic digestion were found. • The AI-2 quenching is a potential regulatory in wastewater treatment and bioenergy research.

Immobilization-Based Bio-formulation of Aspergillus awamori S29 and Evaluation of Its Shelf Life and Re-usability in the Soil-Plant Experiment

The present study was an attempt to evaluate the bio-formulations of phosphate-solubilizing fungus Aspergillus awamori S29 using two economically viable carriers (calcium alginate and agar) in repeated batch fermentation. Further, the viable cell count under storage and response of these stored bio-formulations on the growth of wheat plants were studied at the end of 2, 4, and 6 months of incubation. Also, the response of these formulations in next season on pearl millet (bajra) was studied without further inoculation. In repeated batch fermentation assay, immobilized form performed significantly better than free form. The viability of fungal inoculant was 88.2% in calcium alginate-based bio-formulation after six months of storage. These bio-formulations showed not only a statistically significant increase in the growth of wheat crop in first season but also of pearl millet in next season. This work strengthens the re-usability potential of immobilized bio-formulations for next season crop.

Encapsulation of Bacillus pumilus G5 from polyvinyl alcohol‑sodium alginate (PVA-SA) and its implications in improving plant growth and soil fertility under drought and salt soil conditions

Drought and salt stresses adversely affect the growth and yield of plants in agricultural production. Bacillus pumilus, an important plant growth-promoting bacterium, play a significant role in improving plant tolerance to abiotic stresses. In this study, B. pumilus G5 were immobilized in polyvinyl alcohol‑sodium alginate (PVA-SA) microbeads and then applied on the Pharbitis nil under drought and salt stresses by pot experiment. Orthogonal array experiments showed that the optimal immobilization conditions of PVA-SA immobilized G5 microbeads were adsorbent 6.0%, PVA: SA 1:1 (3.0%), CaCl₂ 4.0%, and bacterium: embedding agent (PVA-SA) 3:4; And the G5 microbeads produced at the optimal condition exhibited better cultivable bacteria count, encapsulation rate, expansion rate and mechanical strength. Pot experiment showed that G5 microbeads significantly increased the length and diameter of root and stem, and dry weight of P. nil during experimental stage under drought and salt stress. G5 microbeads also increased the total cultivable bacteria population, the activities of invertase (INV), urease (URE), phosphatase (PHO) and catalase (CAT), and the contents of available nitrogen (AN) and available phosphorus (AP) in the rhizosphere soil of P. nil. Therefore, our study obtained the optimal process of G5 microbeads, and confirmed its effect on improved plant growth and soil chemical and biological properties of P. nil. Thus it can be used as sustainable tool for eco-friendly bio-inoculants at salinity soil within arid and semi-arid areas.

Encapsulation of Azotobacter vinelandii ATCC 12837 in Alginate-Na Beads as a Tomato Seedling Inoculant

Encapsulation is an immobilization method characterized by restricting microbial cells to a delimited area while preserving their metabolic viability. This technique represents an alternative to improve the adaptive capacity of bacteria in the face of interactions with native microorganisms and environmental factors that limit their inoculation. This study aimed to evaluate the effect of Azotobacter vinelandii ATCC 12837 encapsulated in alginate-Na beads as an inoculant of tomato (Solanum Lycopersicum L) seedlings. Two inoculation treatments were carried out: liquid and encapsulated, and the control without microorganisms. Physiological variables, microbial viability, and the presence of A. vinelandii were determined by qPCR. Inoculation with A. vinelandii in liquid and encapsulated form favored seedling growth. Plants with the encapsulated inoculum significantly increased germination percentage (20%), stem diameter (38%), seedling height (34%), root length (69%), NO₃ concentration (41%), and Na (30%); compared to the control. Encapsulation of A. vinelandii in alginate-Na macrocapsules allowed its establishment in the rhizosphere and was corroborated by viable count and molecular methods. The viability of the bacteria was maintained for 28 days using both inoculation methods, and not detected in the control treatment.

Nitrogen removal characteristics and potential application of the heterotrophic nitrifying-aerobic denitrifying bacteria Pseudomonas mendocina S16 and Enterobacter cloacae DS'5 isolated from aquaculture wastewater ponds

Two biosafety strains, identified as Pseudomonas mendocina S16 and Enterobacter cloacae DS'5, were isolated from freshwater aquaculture ponds and showed significant heterotrophic nitrification-aerobic denitrification abilities. Within 48 h, the inorganic nitrogen removal efficiencies in the two strains were 66.59 %-97.97 % (S16) and 72.27 %-96.44 % (DS'5). The optimal conditions for organic nitrogen removal of the two strains were temperature 20-35 °C and carbon/nitrogen (C/N) ratio 10-20 while using sodium citrate as the carbon source. Sequence amplification demonstrated the presence of the denitrification genes in both the two strains, and quantitative real-time PCR results showed that the coupled expression of nap + nar would improve the nitrate removal rate in S16. The nitrogen removal efficiencies of the two strains in immobilization culture systems were 79.80 %-98.58 % (S16) and 60.80 %-98.40 % (DS'5). This study indicated the great potential application of the two strains in aquaculture tail water treatment.

Application oriented bioaugmentation processes: Mechanism, performance improvement and scale-up

Bioaugmentation is an optimization method with great potential to improve the treatment effect by introducing specific strains into the biological treatment system. In this study, a comprehensive review of the mechanism of bioaugmentation from the aspect of microbial community structure, the optimization methods facilitating application as well as feasible approaches of scale-up application has been provided. The different contribution of indigenous and exogenous strains was critically analyzed, the relationship between microbial community variation and system performance was clarified. Operation regulation and immobilization technologies are effective methods to deal with the possible failure of bioaugmentation. The gradual expansion from lab-scale, pilot scale to full-scale, the transformation and upgrading of wastewater treatment plants through the combination of direct dosing and biofilm, and the application of side-stream reactors are feasible ways to realize the full-scale application. The future challenges and prospects in this field were also proposed.

Bioprocesses for the recovery of bioenergy and value-added products from wastewater: A review

Wastewater and activated sludge present a major challenge worldwide. Wastewater generated from large and small-scale industries, laundries, human residential areas and other sources is emerging as a main problem in sanitation and maintenance of smart/green cities. During the last decade, different technologies and processes have been developed to recycle and purify the wastewater. Currently, identification and fundamental consideration of development of more advanced microbial-based technologies that enable wastewater treatment and simultaneous resource recovery to produce bioenergy, biofuels and other value-added compounds (organic acids, fatty acids, bioplastics, bio-pesticides, bio-surfactants and bio-flocculants etc.) became an emerging topic. In the last several decades, significant development of bioprocesses and techniques for the extraction and recovery of mentioned valuable molecules and compounds from wastewater, waste biomass or sludge has been made. This review presents different microbial-based process routes related to resource recovery and wastewater application for the production of value-added products and bioenergy. Current process limitations and insights for future research to promote more efficient and sustainable routes for this under-utilized and continually growing waste stream are also discussed.

Semi-continuous immobilized cultivation of Porphyridium cruentum for sulfated polysaccharides production

In this study, semi-continuous immobilized cultivation of Porphyridium cruentum through calcium alginate beads was performed for sulfated polysaccharides (SPs) production. The cell biomass and daily SPs productivity in the calcium alginate bead immobilized culture were increased by up to 79 ± 3.4% and 45.6 ± 3.2%, compared to those in the control, respectively. Furthermore, simultaneous application of immobilization and blue wavelength illumination further increased the phycobiliproteins content by 260 ± 9%, compared to those in the control. Similarly, nutrient deficiencies in combination with immobilization increased daily SPs productivity by about twice that of the control. The chemical composition and biological activity of the extracellular polymeric substances produced through immobilization were similar to those of the control. This study suggests the potential application of calcium alginate beads-based immobilization for continuous and high-efficiency SPs production using P. cruentum.

Reducing Drought Stress in Plants by Encapsulating Plant Growth-Promoting Bacteria with Polysaccharides

Drought is a major abiotic stress imposed by climate change that affects crop production and soil microbial functions. Plants respond to water deficits at the morphological, biochemical, and physiological levels, and invoke different adaptation mechanisms to tolerate drought stress. Plant growth-promoting bacteria (PGPB) can help to alleviate drought stress in plants through various strategies, including phytohormone production, the solubilization of mineral nutrients, and the production of 1-aminocyclopropane-1-carboxylate deaminase and osmolytes. However, PGPB populations and functions are influenced by adverse soil factors, such as drought. Therefore, maintaining the viability and stability of PGPB applied to arid soils requires that the PGPB have to be protected by suitable coatings. The encapsulation of PGPB is one of the newest and most efficient techniques for protecting beneficial bacteria against unfavorable soil conditions. Coatings made from polysaccharides, such as sodium alginate, chitosan, starch, cellulose, and their derivatives, can absorb and retain substantial amounts of water in the interstitial sites of their structures, thereby promoting bacterial survival and better plant growth.

Uranium removal from complex mining waters by alginate beads doped with cells of Stenotrophomonas sp. Br8: Novel perspectives for metal bioremediation

Uranium-containing effluents generated by nuclear energy industry must be efficiently remediated before release to the environment. Currently, numerous microbial-based strategies are being developed for this purpose. In particular, the bacterial strain Stenotrophomonas sp. Br8, isolated from U mill tailings porewaters, has been already shown to efficiently precipitate U(VI) as stable U phosphates mediated by phosphatase activity. However, the upscaling of this strategy should overcome some constraints regarding cell exposure to harsh environmental conditions. In the present study, the immobilization of Br8 biomass in an inorganic matrix was optimized to provide protection to the cells as well as to make the process more convenient for real-scale utilization. The use of biocompatible, highly porous alginate beads for Br8 cells immobilization resulted the best alternative when investigating by a multidisciplinary approach (High-Angle Annular Dark-Field Scanning Transmission Electron Microscopy (HAADF-STEM), Environmental Scanning Electron Microscopy (ESEM), Fourier Transform Infrared Spectroscopy with Attenuated Total Reflectance, etc.) several consolidated entrapment methods. This biomaterial was applied to complex real U mining porewaters (containing 47 mg/L U) in presence of an organic phosphate source (glycerol-2-phosphate) to produce reactive free orthophosphates through Br8 phosphatase activity. Uranium immobilization rates around 98 % were observed after one cycle of 72 h. In terms of U removal ability as a function of biomass, Br8-doped alginate beads were determined to remove up to 1199.5 mg U/g dry biomass over two treatment cycles. Additionally, optimized conditions for storing Br8-doped beads and for a correct application were assessed. Results for U accumulation kinetics and HAADF-STEM/ESEM analyses revealed that U removal by the immobilized cells is a biphasic process combining a first passive U sorption onto bead and/or cell surfaces and a second slow active biomineralization. This work provides new practical insights into the biological and physico-chemical parameters governing a high-efficient U bioremediation process based on the phosphatase activity of immobilized bacterial cells when applied to complex mining waters under laboratory conditions.

Immobilized Tetraselmis sp. for reducing nitrogenous and phosphorous compounds from aquaculture wastewater

Removal of nitrogenous and phosphorus compounds from aquaculture wastewater by green microalgae (Tetraselmis sp.) was investigated using a novel method of algal cell immobilization. Immobilized microalgae removed nitrogenous and phosphorous compounds efficiently from aquaculture wastewater. Results showed that Tetraselmis beads reduced significantly (p < 0.05) the total ammonia nitrogen, nitrite nitrogen and soluble reactive phosphorous concentration (0.08; 0.10 and 0.17 mg/L, respectively) from the initial concentration of 7.7, 3.1 and 2.0 mg/L respectively within 48 h compared to other treatments. Removal rate of total ammonia nitrogen, nitrite nitrogen and soluble reactive phosphorous were 99.2, 99.2 and 94.3% respectively, for the artificial wastewater within 24 h. For the shrimp pond wastewater, total ammonia nitrogen, nitrite nitrogen and soluble reactive phosphorous were reduced 98.9, 97.7 and 91.1% respectively within 48 h. It is concluded that Tetraselmis sp. beads is an effective means to reduce nitrogen and phosphorus levels in aquaculture wastewater.

Development of autotrophic and heterotrophic consortia via immobilized microbial beads for chemical wastewater treatment, using PTA wastewater as an approach

Studies on the symbiosis of microalgae-bacteria have been accelerating as a mean for wastewater remediation. However, there were few reports about the microalgae-bacteria consortia for chemical wastewater treatment. The aim of the present study is to develop an autotrophic and heterotrophic consortium for chemical wastewater treatment and probe whether and how bacteria could benefit from the microalgae during the treatment process, using PTA wastewater as an approach. A process-dependent strategy was applied. First of all, the results showed that the sludge beads with the sludge concentration of 30 g/L were the optimal one with the COD removal rate at 84.8% but the ceiling effect occurred (COD removal rate < 90%) even several common reinforcement methods were applied. Additionally, by adding the microalgae Chlorella vulgaris, a microalgae-activated sludge consortium was formed inside the immobilized beads, which provided better performance to shatter the ceiling effect. The COD remove rate was higher than 90%, regardless of the activated sludge was pre-culture or not. COD removal capacity could also be improved (COD removal rate > 92%) when LEDs light belt was offered as an advanced light condition. Biochemical assay and DNA analysis indicated that the microalgae could form an internal circulation of substances within the activated sludge and drove the microbial community to success and the corresponding gene functions, like metabolism and.

Analysis of the Status and Improvement of Microalgal Phosphorus Removal from Municipal Wastewater

Phosphorus, as one of the main pollutants in municipal sewage, has received increasing attention recently. Phosphorus recovery also increases the sustainable development of municipal wastewater. Since algae have the ability to effectively redirect nutrients, including phosphorus, from municipal sewage to algae biomass, municipal sewage treatments involving microalgae have piqued the interest of many researchers. The phosphorus removal depends on the potential of the microalgae to absorb, preserve, or degrade phosphorus in municipal wastewater. It is, therefore, of great interest to study the mechanisms underlying the absorption, storage, and degradation of phosphorus by microalgae to ensure the viability of this phosphorus removal process in wastewater. The objectives of this review were to summarize phosphorus metabolism in microalgae, examine key external and internal factors impacting phosphorous removal by microalgae from wastewater, and examine the status of phosphorous-metabolism-related research to improve our understanding of microalgae-based municipal wastewater treatments. In addition, the methods of recovery of microalgae after phosphorous removal were summarized to ensure the sustainability of municipal wastewater treatment. Finally, a potential approach using nanomaterials was proposed to enhance the overall phosphorous removal performance in municipal wastewater through the addition of nanoparticles such as magnesium and iron.

Co-culturing microbial consortia: approaches for applications in biomanufacturing and bioprocessing

The application of microbial co-cultures is now recognized in the fields of biotechnology, ecology, and medicine. Understanding the biological interactions that govern the association of microorganisms would shape the way in which artificial/synthetic co-cultures or consortia are developed. The ability to accurately predict and control cell-to-cell interactions fully would be a significant enabler in synthetic biology. Co-culturing method development holds the key to strategically engineer environments in which the co-cultured microorganism can be monitored. Various approaches have been employed which aim to emulate the natural environment and gain access to the untapped natural resources emerging from cross-talk between partners. Amongst these methods are the use of a communal liquid medium for growth, use of a solid-liquid interface, membrane separation, spatial separation, and use of microfluidics systems. Maximizing the information content of interactions monitored is one of the major challenges that needs to be addressed by these designs. This review critically evaluates the significance and drawbacks of the co-culturing approaches used to this day in biotechnological applications, relevant to biomanufacturing. It is recommended that experimental results for a co-cultured species should be validated with different co-culture approaches due to variations in interactions that could exist as a result of the culturing method selected.

Rice vinasse treatment by immobilized Synechococcus pevalekii and its effect on Dunaliella salina cultivation

The development of new strategies in microalgal studies represents an outstanding opportunity to mitigate environmental problems coupled with biomass production at a reduced cost. Here we present a combined bioprocess for the treatment of rice vinasse using immobilized cyanobacteria Synechococcus pevalekii in alginate beads followed by the use of the treated vinasse as a culture medium for Dunaliella salina biomass production. Cyanobacterial-alginate beads showed a chlorophyll a production of 0.68 × 10^-3 mg bead^-1 and a total carotenoid production of 0.64 × 10^-3 mg bead^-1. The first step showed a decrease in nitrate (91%), total solids (29%), and ions. Addition of treated vinasse into D. salina cultivation resulted in a significant increase in cell replication of about 175% (optimized cultivation). The use of natural seawater drastically reduced the medium cost to US$4.75 per m³ and the addition of treated vinasse has the potential to reduce it even more (up to 69%). This study not only provides an insight on the use of cyanobacteria for rice vinasse treatment but also demonstrates a promising lower-cost medium for marine microalgal biomass production with biotechnological purposes.

Effect of cryopreservation on the bacterial community structure of filamentous cyanobacteria, Trichormus variabilis (Nostocales, Cyanobacteria)

Cryopreservation is an efficient method used to preserve microorganisms for long periods of time, such as up to 30 years, without changes in genetic and physiological characteristics. As cyanobacteria and microalgae are usually maintained as both axenic and xenic cultures, knowledge of co-cultured bacteria and changes in their community structure is important for the successful maintenance of microbial culture collections. In this study, research on the changes in co-cultured bacterial community structure during cyanobacterial cryopreservation were investigated using three different experimental groups by next generation sequencing (NGS): 1) cultured Trichormus variabilis without cryopreservation (control group), 2) cultured T. variabilis after cryopreservation in 10% dimethyl sulfoxide (Me₂SO) for 14 days (cryo-cell group), and 3) cultured T. variabilis after cryopreservation in 10% Me₂SO for 14 days within alginate beads (cryo-bead group). The results showed that the abundance of Sphingomonas and Hydrogenophaga (belonging to phylum Proteobacteria) was significantly increased in the cryo-bead group (Sphingomonas, control: 0.25%, cryo-cell: 1.32%, cryo-bead: 41.70%; Hydrogenophaga, control: 5.47%, cryo-cell: 5.24%, cryo-bead: 12.32%). However, the abundance of the phylum Bacteroidetes was significantly decreased in the cryo-bead group compared to that in the other groups (control: 26.29%, cryo-cell: 38.84%, cryo-bead: 11.43%). Bacterial diversity was generally reduced after cryopreservation in the cryo-bead group, where the overgrowth of a few unique bacteria was observed in the co-cultured bacterial community. These results imply that changes in the co-cultured bacterial community during preservation should be considered as an important factor for the development of methods for cyanobacterial cryopreservation.

Novel wastewater surveillance strategy for early detection of coronavirus disease 2019 hotspots

The novel coronavirus disease 2019, a pandemic of global concern, caused by the novel severe acute respiratory syndrome coronavirus 2 has severely revealed the need for public monitoring and efficient screening techniques. Despite the various advancements made in the medical and research field, containment of this virus has proven to be difficult on several levels. As such, it is a necessary requirement to identify possible hotspots in the early stages of any disease. Based on previous studies carried out on coronaviruses, there is a high likelihood that severe acute respiratory syndrome coronavirus 2 may also survive in wastewater. Hence, we propose the use of nanofiber filters as a wastewater pretreatment routine and upgradation of existing wastewater evaluation and treatment systems to serve as a beneficial surveillance tool.

Phenol biodegradation by bacterial cultures encapsulated in 3D microfiltration-membrane capsules

The aim of the study was to evaluate the performance of batch and semi-continuous treatment systems for phenol degradation using a consortium of bacterial cultures that were encapsulated using the 'Small Bioreactor Platform' (SBP) encapsulation method. The maximal phenol biodegradation rate was 22 and 48 mg/L/h at an initial phenol concentration of 100 and 1000 mg/L in the batch and semi-continuous bioreactors, respectively. The initial phenol concentration played an important role in the degradation efficiency rates. The batch bioreactor results could be described by the Haldane model, where the degradation rate decreased under low as well as under very high initial phenol concentrations. Concentration equalization between the two sides of the SBP capsule's membrane occurred after 80 min. The microfiltration membrane is perforated with holes that have an average diameter of 0.2-0.7 µm. It is therefore suggested that the capsule's membrane is more permeable compared to other polymeric matrixes used for bacterial encapsulation (such as alginate). This study shows that the encapsulation of phenol degraders within microfiltration-membrane capsules which create a confined environment has a potential for enhancing phenol removal in phenol-rich wastewaters.

Techniques for improving formulations of bioinoculants

Bioinoculants are eco-friendly microorganisms having a variety of products commonly utilized for improving the potential of soil and providing the nutrient requirements to the host plant. The usage of chemical fertilizers is not beneficial because it affects the soil microbial communities on large scale. The toxicity of chemical fertilizer decreases the fertility of soil and causes microbial disruption. Bioinoculants that are used as PGPR play an important role in the enhancement of crop production and beneficial for both producers and consumers economically by protecting the soil during unfavourable conditions. The utilization of PGPR in the bioinoculant form imparts successfully sustain agricultural yield production and such formulated products contain living microbial cells of bioinoculants that also helps in seed treatment and enhances the mobilization process of nutrients by the low-cost process. This review mainly focuses on different bioinoculant formulations related to its recent approaches such as metabolite formulations, liquid formulations, solid carrier-based formulations and synthetic polymer-based formulations. This review also gives an overview of some aspects of the bioinoculant efficiency and their appropriate formulation, production and storage condition of microbial cells.

Systematic degradation mechanism and pathways analysis of the immobilized bacteria: Permeability and biodegradation, kinetic and molecular simulation

In order to effectively improve the degradation rate of diesel, a systematic analysis of the degradation mechanism used by immobilized bacteria is necessary. In the present study, diesel degradation mechanisms were assessed by analyzing permeability, biodegradation, adsorption kinetics, and molecular simulation. We found that bacteria immobilized on cinnamon shells and peanut shells degraded relatively high amounts of diesel (69.94% and 64.41%, respectively). The primary degradation pathways used by immobilized bacteria included surface adsorption, internal uptake, and biodegradation. Surface adsorption was dominant in the early stage of degradation, whereas biodegradation was dominant in later stages. The diesel adsorption rate of the immobilized bacteria was in agreement with the pseudo second-order kinetic model. The immobilized bacteria and diesel interacted through hydrogen bonds.

Effective Gold Biosorption by Electrospun and Electrosprayed Bio-composites with Immobilized Lysinibacillus sphaericus CBAM5

Electro-hydrodynamic processing, comprising electrospinning and electrospraying techniques, is a novel technology used in the production of nano- and sub-micro-scale materials with specific properties suitable for environmental remediation processes. Polycaprolactone (PCL) micro-fibrous mats and alginate microcapsules were produced using electrospinning and electrospraying techniques respectively, and Lysinibacillus sphaericus CBAM5, a bacterium capable of metal removal by adsorption and accumulation inside the cell, was immobilized in these matrices. The polymeric structure was able to protect and maintain cell viability and the bio-composite materials were used to capture gold from synthetic water samples. The micro-fibrous membranes with immobilized bacteria were able to remove 93% of the gold after 120 h of inclusion in the aqueous medium. Using a filtration system, an efficiency of 64% was obtained for the removal of the precious metal after 10 cycles of filtration (2 h of exposure to the gold solution). In contrast, the microencapsulated L. sphaericus CBAM5 captured 64% of the gold after 4 h of the assay. Thus, both micro-structured matrices were suitable for the immobilization and protection of L. sphaericus CBAM5 and they showed high efficiencies of gold biosorption. Hence, these bio-composite materials could be used to concentrate gold from industrial wastewaters.

The effect of the microalgae-bacteria microbiome on wastewater treatment and biomass production

The use of microalgae for wastewater treatment has been proposed as a cost-effective method to produce biofuels while remediating waste streams. This study examined the microalgae biomass production rate, wastewater treatment efficiency, and prokaryotic organism microbiome associated with microalgae Chlorella sorokiniana cultivated on anaerobic digestate effluent. Final microalgae biomass concentrations from nine photobioreactors were highly variable and had values that ranged between 0.14 g/L and 0.90 g/L. Nutrient removal efficiencies for TN (total nitrogen), N-NH₄ (ammonium nitrogen), and COD (chemical oxygen demand) ranged from 34% to 67%, 65% to 97%, and-60% to 14%, respectively. Analysis of individual OTUs (operational taxonomic units) from the microbial community revealed that microalgae biomass concentrations were significantly correlated with the relative abundance of OTUs in the genus Pusillimonas. Predictive metagenomic analyses identified additional correlations associated with biomass production and nutrient removal. These results suggest that the microbial community present during microalgae cultivation on wastewater can impact the performance of the system for biomass production and wastewater treatment.

Microalgae wastewater treatment: Biological and technological approaches

Current global environmental issues raise unavoidable challenges for our use of natural resources. Supplying the human population with clean water is becoming a global problem. Numerous organic and inorganic impurities in municipal, industrial, and agricultural waters, ranging from microplastics to high nutrient loads and heavy metals, endanger our nutrition and health. The development of efficient wastewater treatment technologies and circular economic approaches is thus becoming increasingly important. The biomass production of microalgae using industrial wastewater offers the possibility of recycling industrial residues to create new sources of raw materials for energy and material use. This review discusses algae-based wastewater treatment technologies with a special focus on industrial wastewater sources, the potential of non-conventional extremophilic (thermophilic, acidophilic, and psychrophilic) microalgae, and industrial algae-wastewater treatment concepts that have already been put into practice.