Immobilization of defined laccase combinations for enhanced oxidation of phenolic contaminants

A systematic study on the characteristics and applications of laccases produced by fungi: insights on their potential for biotechnologies

Laccases are polyphenol oxidase enzymes and form the enzyme complex known for their role in wood decomposition and lignin degradation. The present study aimed to systematically review the state-of-the-art trends in scientific publications on laccase enzymes of the last 10 years. The main aspects checked included the laccase-producing fungal genera, the conditions of fungal growth and laccase production, the methods of immobilization, and potential applications of laccase. After applying the systematic search method 177 articles were selected to compound the final database. Although various fungi produce laccase, most studies were Trametes and Pleurotus genera. The submerged fermentation (SmF) has been the most used, however, the use of solid-state fermentation (SSF) appeared as a promising technique to produce laccase when using agro-industrial residues as substrates. Studies on laccase immobilization showed the covalent bonding and entrapment methods were the most used, showing greater efficiency of immobilization and a high number of enzyme reuses. The main use of the laccase was in bioremediation, especially in the discoloration of dyes from the textile industry and the degradation of pharmaceutical waste. Implications and consequences of all these findings in biotechnology and environment, as well as the trends and gaps of laccase research were discussed.

Direct binding and characterization of laccase onto iron oxide nanoparticles

Iron oxide nanoparticles (IONPs) exhibit unique magnetic properties and possess a high surface-to-volume ratio, making them ideal candidates for the conjugation of substances, including enzymes. Laccase (EC 1.10.3.2), an oxidative enzyme with diverse applications, presents an opportunity for enhancing stability and reusability through innovative immobilization techniques, thus reducing overall process costs. In this study, we employed a direct binding procedure via carbodiimide activation to conjugate laccase onto IONPs synthesized using thermal chemical coprecipitation. Stabilization of the nanoparticles was achieved using thioglycerol and polyvinyl alcohol (PVA) as capping agents. Characterization of the synthesized nanoparticles was conducted using UV-spectroscopy, Fourier transform infrared spectroscopy (FTIR), x-ray diffraction, scanning electron microscopy, and energy dispersive x-ray spectroscopy. FTIR spectroscopy analysis confirmed successful laccase binding to magnetic nanoparticles, with binding efficiencies of 90.65% and 73.02% observed for thioglycerol and PVA capped IONPs, respectively. Furthermore, the conjugated enzyme exhibited remarkable stability, retaining nearly 50% of its initial activity after 20 reuse cycles. This research demonstrates that immobilizing laccase onto IONPs enhances its activity, stability, and reusability, with the potential for significant cost savings and expanded applications in various fields.

Characterization of laccases from Trametes hirsuta in the context of bioremediation of wastewater treatment plant effluent

The bioremediation of pharmaceutical compounds contained in wastewater, in an ecological and sustainable way, is possible via the oxidative action of fungal laccases. The discovery of new fungal laccases with unique physico-chemical characteristics pushes researchers to identify suitable laccases for specific applications. The aim of this study is to purify and characterize laccase isoenzymes produced from the Trametes hirsuta IBB450 strain for the bioremediation of pharmaceutical compounds. Two main laccases mixtures were observed and purified in the extracts and were called Yn and Yg. Peptide fingerprinting analysis suggested that Yn was constituted mainly of laccase Q02497 and Yg of laccase A0A6M5CX58, respectively. Robustness tests, based on tolerance and stability, showed that both laccases were affected in a relatively similar way by salts (KCl, NaCl), organic solvents (ACN, MeOH), denaturing compounds (urea, trypsin, copper) and were virtually unaffected and stable in wastewater. Determination of kinetic constants (Michaelis (KM), catalytic constant (kcat) and kinetic efficiency (K=kcat/KM)) for the transformation of synthetic hormone 17α-ethynylestradiol and the anti-inflammatory agent diclofenac indicates a lower KM and kcat for laccase Yn but relative similar K constant compared to Yg. Synergistic effects were observed for the transformation of diclofenac, unlike 17α-ethynylestradiol. Transformation studies of 17α-ethynylestradiol at different temperatures (4 and 21 °C) indicate a transformation rate reduction of approximately 75-80% at 4 °C against 25% for diclofenac in less than an hour. Finally, the classification of laccases Yg and Yn into one of eight groups (group A-H) suggests that laccase Yg belongs to group A (constitutive laccase) and laccase Yn belongs to group B (inducible laccase).

Applications and immobilization strategies of the copper-centred laccase enzyme; a review

Laccase is a multi-copper enzyme widely expressed in fungi, higher plants, and bacteria which facilitates the direct reduction of molecular oxygen to water (without hydrogen peroxide production) accompanied by the oxidation of an electron donor. Laccase has attracted attention in biotechnological applications due to its non-specificity and use of molecular oxygen as secondary substrate. This review discusses different applications of laccase in various sectors of food, paper and pulp, waste water treatment, pharmaceuticals, sensors, and fuel cells. Despite the many advantages of laccase, challenges such as high cost due to its non-reusability, instability in harsh environmental conditions, and proteolysis are often encountered in its application. One of the approaches used to minimize these challenges is immobilization. The various methods used to immobilize laccase and the different supports used are further extensively discussed in this review.

Coimmobilized enzymes as versatile biocatalytic tools for biomass valorization and remediation of environmental contaminants - A review

Due to stringent regulatory norms, waste processing faces confrontations and challenges in adapting technology for effective management through a convenient and economical system. At the global level, attempts are underway to achieve a green and sustainable treatment for the valorization of lignocellulosic biomass as well as organic contaminants in wastewater. Enzymatic treatment in the environmental aspect thrived on being the promising rapid strategy that appeased the aforementioned predicament. On that account, coimmobilization of various enzymes on single support enhances the catalytic activity ensuing operational stability with industrial applications. This review pivoted towards the coimmobilization of enzymes on diverse supports and their applications in biomass conversion to industrial value-added products and removal of contaminants in wastewater. The limelight of this study chronicles the unique breakthroughs in biotechnology for the production of reusable biocatalysts, which inculcating various enzymes towards the scope of environment application.

Expanding the Scope of Nanobiocatalysis and Nanosensing: Applications of Nanomaterial Constructs

The synergistic interaction between advanced biotechnology and nanotechnology has allowed the development of innovative nanomaterials. Those nanomaterials can conveniently act as supports for enzymes to be employed as nanobiocatalysts and nanosensing constructs. These systems generate a great capacity to improve the biocatalytic potential of enzymes by improving their stability, efficiency, and product yield, as well as facilitating their purification and reuse for various bioprocessing operating cycles. The different specific physicochemical characteristics and the supramolecular nature of the nanocarriers obtained from different economical and abundant sources have allowed the continuous development of functional nanostructures for different industries such as food and agriculture. The remarkable biotechnological potential of nanobiocatalysts and nanosensors has generated applied research and use in different areas such as biofuels, medical diagnosis, medical therapies, environmental bioremediation, and the food industry. The objective of this work is to present the different manufacturing strategies of nanomaterials with various advantages in biocatalysis and nanosensing of various compounds in the industry, providing great benefits to society and the environment.

Insolubilization of Tramates versicolor laccase as cross-linked enzyme aggregates for the remediation of trace organic contaminants from municipal wastewater

The novelty of this study deals with the biocatalytic treatment of trace organic contaminants (TrOCs) from municipal wastewater by insolubilized laccase. Laccase from Trametes versicolor was aggregated by three-phase partitioning technique followed by cross-linking with glutaraldehyde to produce insolubilized laccase as cross-linked enzyme aggregates (CLEAs). The optimal conditions for CLEAs preparation include ammonium sulphate concentration of 83% (w/v), crude to t-butanol ratio of 1.00: 1.05 (v/v), pH 5.3, and glutaraldehyde concentration of 20 mM obtained via statistical design. The efficiency of insolubilization of the CLEAs laccase based on the k_cat/k_m ratio was approximately 4.8-fold greater than that of free laccase. The developed CLEAs showed greater resistance to product inhibition mediated by ABTS than the free enzyme and exhibited excellent catalytic activity even after the tenth successive cycle. Further, free laccase and the synthesized CLEAs laccase were utilized to treat five analgesics, two NSAIDS, three antibiotics, two antilipemics, and three pesticides in the municipal wastewater. Under the batch process with operating conditions of pH 7.0 and 20 °C, 1000 U/L of CLEAs, laccase removed 11 TrOCs in the range of about 20-99%. However, the inactivated CLEAs only adsorbed 2-25% of TrOCs. It was observed that acetaminophen, mefenamic acid, trimethoprim, and metolachlor depicted almost complete removal with CLEAs laccase. The performance of CLEAs laccase in a perfusion basket reactor was tested for the removal of TrOCs from municipal wastewater.

Green remediation potential of immobilized oxidoreductases to treat halo-organic pollutants persist in wastewater and soil matrices - A way forward

The alarming presence of hazardous halo-organic pollutants in wastewater and soils generated by industrial growth, pharmaceutical and agricultural activities is a major environmental concern that has drawn the attention of scientists. Unfortunately, the application of conventional technologies within hazardous materials remediation processes has radically failed due to their high cost and ineffectiveness. Consequently, the design of innovative and sustainable techniques to remove halo-organic contaminants from wastewater and soils is crucial. Altogether, these aspects have led to the search for safe and efficient alternatives for the treatment of contaminated matrices. In fact, over the last decades, the efficacy of immobilized oxidoreductases has been explored to achieve the removal of halo-organic pollutants from diverse tainted media. Several reports have indicated that these enzymatic constructs possess unique properties, such as high removal rates, improved stability, and excellent reusability, making them promising candidates for green remediation processes. Hence, in this current review, we present an insight of green remediation approaches based on the use of immobilized constructs of phenoloxidases (e.g., laccase and tyrosinase) and peroxidases (e.g., horseradish peroxidase, chloroperoxidase, and manganese peroxidase) for sustainable decontamination of wastewater and soil matrices from halo-organic pollutants, including 2,4-dichlorophenol, 4-chlorophenol, diclofenac, 2-chlorophenol, 2,4,6-trichlorophenol, among others.

Enzymatic Potential of Bacteria and Fungi Isolates from the Sewage Sludge Composting Process

The aim of this study was the isolation and characterisation of the fungi and bacteria during the composting process of sewage sludge under a semipermeable membrane system at full scale, in order to find isolates with enzymatic activities of biotechnological interest. A total of 40 fungi were isolated and enzymatically analysed. Fungal culture showed a predominance of members of Ascomycota and Basidiomycota division and some representatives of Mucoromycotina subdivision. Some noticeable fungi isolated during the mesophilic and thermophilic phase were Aspergillus, Circinella, and Talaromyces. During the maturation phase, some lignin modifying enzyme producers, like Purpureocillium, Thielavia, Bjerkandera, or Dichotomyces, were found. Within this group, Thielavia and Bjerkandera showed high activity with production of laccases and peroxidases. In the bacterial culturome, a total of 128 strains were selected and enzymatically analysed. Bacillales, Actinomycetales, Pseudomonadales, and Lactobacillales were the orders most represented in culture-bacteria. Bacillus pumilus, B. stratosphericus, B. safensis, and Pseudomonas formosensis were the species most efficient in enzyme production, particularly peroxidases, polyphenol oxidases ammonifying activity, and amylases. These results showed that sewage sludge composting piles could represent a source of microorganisms which have adapted to adverse conditions.

Influence of humic acids on fungal laccase-initiated 17α-ethynylestradiol oligomerization: Transformation kinetics and products distribution

Fungal laccase has aroused great concern in rapidly removing estrogens because of its ability to accelerate humification and oligomerization. Here, the effect of two humic acids (HAs) on the reaction kinetics and products distribution of 17α-ethynylestradiol (EE2) in laccase-initiated humification and coupling was systematically elucidated. Laccase from Trametes versicolor exhibited over 98.3% removal rate for EE2 at pH 5.0 within 120 min, while HAs invariably restrained EE2 transformation by competing with target-substrate for the enzymatic catalytic center. EE2 removal followed pseudo-first-order kinetics, and the rate constant was decreased markedly with increasing concentration of two HAs (0-60 mg L^-1). Additionally, laccase heightened the aromaticity and humification degrees (A_{250 nm}/A_{365 nm} ratio) of HAs probably due to the formation of new humic polymers such as (HA)_m and/or (HA)_m-(EE2)_n (m and n represent the number of HA and EE2 units, respectively). Three major EE2 oligomers were identified, in accordance with a mechanism involving the phenoxy radical-driven polymerization to yield a wide variety of self-coupling products. Notably, HAs diminished the extent of EE2 self-coupling but aggrandized the cross-coupling between EE2 and HAs, and the inhibition degree of EE2 self-coupling increased with the concentration of HAs. One major reason is EE2 could be covalently incorporated into humic molecules to produce (HA)_m-(EE2)_n cross-coupling products via radical-caused C-C, C-O-C, and/or C-O-C bonds, thereby reducing EE2 self-oligomerization. These findings highlight that HAs play a vital role in the fungal laccase-induced humification and oligomerization of EE2, which obviously alter the geochemical fate and transport of EE2 in natural aquatic ecosystems.

Metal and metal-oxide nanozymes: bioenzymatic characteristics, catalytic mechanism, and eco-environmental applications

Phenolic contaminants (R-OH) are a category of highly toxic organic compounds that are widespread in aquatic ecosystems and can induce carcinogenic risk to wildlife and humans; natural enzymes as green catalysts are capable of step-polymerizing these compounds to produce diverse macromolecular self-coupling products via radical-mediated C-C and C-O-C bonding at either the ortho- or para-carbon position, thereby evading the bioavailability and ecotoxicity of these compounds. Intriguingly, certain artificial metal and metal-oxide nanomaterials are known as nanozymes. They not only possess the unique properties of nanomaterials but also display intrinsic enzyme-mimicking activities. These artificial nanozymes are expected to surmount the shortcomings, such as low stability, easy inactivation, difficult recycling, and high cost, of natural enzymes, thus contributing to eco-environmental restoration. This review highlights the available studies on the enzymatic characteristics and catalytic mechanisms of natural enzymes and artificial metal and metal-oxide nanozymes in the removal and transformation of R-OH. These advances will provide key research directions beneficial to the multifunctional applications of artificial nanozymes in aquatic ecosystems.

Cu2+-assisted laccase from Trametes versicolor enhanced self-polyreaction of triclosan

Laccase-mediated humification processes (L-MHPs) can be used to polymerize and transform phenolic pollutants in water. However, the mechanism on Cu²⁺ impacts the self-polymerization of multi-purpose antimicrobial agent triclosan during L-MHPs is less understood. Here, the influence of divalent metal ions (DMIs) on Trametes versicolor laccase activity was investigated. Particularly, the performance of Cu²⁺-assisted laccase in polymerizing and transforming triclosan was systematically characterized. Compared with DMI-free, the activity of laccase was obviously accelerated with Cu²⁺ present due to copper is a vital component of laccase catalytic center. It was found that Cu²⁺-assisted laccase was effective in transforming triclosan, and the enzymatic reaction kinetic constants increased from 0.28 to 0.73 h^-1 as the Cu²⁺ concentration increased (0-3.0 mM). Identification of intermediate products revealed that laccase oxidation predominantly generated triclosan dimers, trimers, and tetramers. The presence of Cu²⁺ reinforced self-polymerization of triclosan via forming more triclosan oligomers relative to the Cu²⁺-free, which likely attributed to the enhancement of laccase activity and stability with Cu²⁺ present in L-MHPs. A possible transformation mechanism was proposed as follows: Laccase initially catalyzed the oxidation of triclosan to generate phenoxy radical intermediates, which self-coupled to each other subsequently by radical-mediated CC and COC covalent binding, forming oligomers and polymers. The growth inhibitory assays of freshwater microalgae (Chlamydomonas reinhardtii and Scenedesmus obliquus) demonstrated that the self-polymerized triclosan by L-MHPs had lower toxicity than the parent compound. These findings implied that Cu²⁺-assisted laccase was an effective strategy for rapidly self-polyreaction and detoxication of triclosan from Cu²⁺-triclosan combined polluted wastewater.

Enhanced laccase-mediated transformation of diclofenac and flufenamic acid in the presence of bisphenol A and testing of an enzymatic membrane reactor

The inadequate removal of pharmaceuticals and other micropollutants in municipal wastewater treatment plants, as evidenced by their detection of these substances in the aquatic environment has led to the need for sustainable remediation strategies. Laccases possess a number of advantages including a broad substrate spectrum. To identify promoting or inhibitory effects of reaction partners in the remediation processes we tested not only single compounds-as has been described in most studies-but also mixtures of pollutants. The reaction of diclofenac (DCF) and flufenamic acid (FA), mediated by Trametes versicolor laccase resulted in the formation of products, which were more hydrophilic than the respective reactant (reactant concentration of 0.1 mM; laccase activity 0.5 U/ml). Analyses (HPLC, LC/MS) showed that the product 1a and 1b for DCF and FA, respectively, to be a para-benzoquinone imine derivative. The formation of 1a was enhanced by the addition of bisphenol A (BPA). After 6 days 97% more product was formed in the mixture of DCF and BPA compared with DCF tested alone. Product 1a was also detected in experiments with micropollutant-supplemented secondary effluent. Within 24 h 67% and 100% of DCF and BPA were transformed, respectively (25 U/ml). Experiments with a membrane reactor (volume 10 l; phosphate buffer, pH 7) were in good agreement with the results of the laboratory scale experiments (50 ml). EC50-values were also determined. The data support the use of laccases for the removal or detoxification of recalcitrant pollutants. Thus, the enzyme laccase may be a component of an additional environmentally friendly process for the treatment stage of wastewater remediation.

Mass spectrometry based in vitro assay investigations on the transformation of pharmaceutical compounds by oxidative enzymes

The ubiquitous presence of trace organic chemicals in wastewater and surface water leads to a growing demand for novel removal technologies. The use of isolated enzymes has been shown to possess the capability for a targeted application but requires a clearer mechanistic understanding. In this study, the potential of peroxidase from horseradish (HRP) and laccase from Pleurotus ostreatus (LccPO) to transform selected trace organic chemicals was studied using mass spectrometry (MS)-based in vitro enzyme assays. Conversion by HRP appeared to be more efficient compared to LccPO. Diclofenac (DCF) and sotalol (STL) were completely transformed by HRP after 4 h and immediate conversion was observed for acetaminophen (APAP). During treatment with LccPO, 60% of DCF was still detectable after 24 h and no conversion was found for STL. APAP was completely transformed after 20 min. Sulfamethoxazole (SMX), carbamazepine (CBZ), ibuprofen (IBP) and naproxen (NAP) were insusceptible to enzymatic conversion. In pharmaceutical mixtures, HRP exhibited a preference for DCF and APAP and the generally less efficient conversion of STL was enhanced in presence of APAP. Transformation product pattern after treatment with HRP revealed polymerization products for DCF while STL showed cleavage reactions. DCF product formation shifted towards a proposed dimeric iminoquinone product in presence of APAP whereas a generally less pronounced product formation in mixtures was observed for STL. In conclusion, the enzymatic treatment approach worked selectively and efficiently for a few pharmaceuticals. However, for application the investigation and possibly immobilization of multiplex enzymes being able to transform diverse chemical structures is recommended.

Candida antarctica Lipase B Immobilized onto Chitin Conjugated with POSS® Compounds: Useful Tool for Rapeseed Oil Conversion

A new method is proposed for the production of a novel chitin-polyhedral oligomeric silsesquioxanes (POSS) enzyme support. Analysis by such techniques as X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed the effective functionalization of the chitin surface. The resulting hybrid carriers were used in the process of immobilization of the lipase type b from Candida antarctica (CALB). Fourier transform infrared spectroscopy (FTIR) confirmed the effective immobilization of the enzyme. The tests of the catalytic activity showed that the resulting support-biocatalyst systems remain hydrolytically active (retention of the hydrolytic activity up to 87% for the chitin + Methacryl POSS® cage mixture (MPOSS) + CALB after 24 h of the immobilization), as well as represents good thermal and operational stability, and retain over 80% of its activity in a wide range of temperatures (30-60 °C) and pH (6-9). Chitin-POSS-lipase systems were used in the transesterification processes of rapeseed oil at various reaction conditions. Produced systems allowed the total conversion of the oil to fatty acid methyl esters (FAME) and glycerol after 24 h of the process at pH 10 and a temperature 40 °C, while the Methacryl POSS® cage mixture (MPOSS) was used as a chitin-modifying agent.

Towards high potential magnetic biocatalysts for on-demand elimination of pharmaceuticals

The present study investigated the applicability of a laccase based bioprocess for the treatment of a mixture containing 13 selected pharmaceuticals. To do so, laccase was immobilized as cross-linked enzyme aggregates (MAC-CLEAs) on amine functionalized magnetic nanoparticles using chitosan/1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide hydrochloride (EDAC) as the cross-linking system. The activity recovery of laccase reached 61.4% under the optimal conditions of MAC-CLEAs formation. The latter exhibited enhanced storage stability over one year at 4°C and showed better temperature resistance compared to its soluble counterpart. The biocatalysts were properly recycled and the catalytic activity recovery was good even after a hundred and fifty batch reactions. Complete removal of pharmaceuticals like acetaminophen, diclofenac, mefenamic acid, atenolol and epoxy carbamazepine and partial removal of fenofibrate, diazepam, trimethoprim, and ketoprofen by laccase was achieved within 12h of incubation, whereas efficient removal of indometacin required the presence of mediator.

The in vivo estrogenic modulatory effect of bisphenol A (BPA) on Oreochromis mossambicus and prevention of early maturation of ovary by conjugates of intracellular laccase and silica nanoparticles

Immobilized laccase can significantly reduce thein vivoestrogenic effect of BPA and protect organisms from endocrine disrupting effect and extinction.

Correlation between mesopore volume of carbon supports and the immobilization of laccase from Trametes versicolor for the decolorization of Acid Orange 7

Immobilization of laccase from Trametes versicolor was carried out using carbon supports prepared from different lignocellulosic wastes. Enzymes were immobilized by physical adsorption. Taguchi methodology was selected for the design of experiments regarding the preparation of the carbon materials, which included the use of activating agents for the promotion of mesoporosity. A good correlation between the mesopore volumes of the carbon supports and the corresponding laccase loadings attained was observed. Specifically, the chemical activation of pecan nut shell with FeCl3 led to a highly mesoporous material that also behaved as the most efficient support for the immobilization of laccase. This particular laccase/carbon support system was used as biocatalyst for the decolorization of aqueous solutions containing Acid Orange 7. Mass spectrometry coupled to a liquid chromatograph allowed us to identify the products of the dye degradation.

Laccases to take on the challenge of emerging organic contaminants in wastewater

The removal of emerging organic contaminants from municipal wastewater poses a major challenge unsatisfactorily addressed by present wastewater treatment processes. Enzyme-catalyzed transformation of emerging organic contaminants (EOC) has been proposed as a possible solution to this major environmental issue more than a decade ago. Especially, laccases gained interest in this context in recent years due to their broad substrate range and since they only need molecular oxygen as a cosubstrate. In order to ensure the stability of the enzymes and allow their retention and reuse, either immobilization or insolubilization of the biocatalysts seems to be the prerequisite for continuous wastewater treatment applications. The present review summarizes the research conducted on EOC transformation with laccases and presents an overview of the possible immobilization techniques. The goal is to assess the state of the art and identify the next necessary steps that have to be undertaken in order to implement laccases as a tertiary wastewater treatment process in sewage treatment plants.