Impact of food-related environmental factors on the adherence and biofilm formation of natural Staphylococcus aureus isolates

Surfactants' Interplay with Biofilm Development in Staphylococcus and Candida

The capacity of micro-organisms to form biofilms is a pervasive trait in the microbial realm. For pathogens, biofilm formation serves as a virulence factor facilitating successful host colonization. Simultaneously, infections stemming from biofilm-forming micro-organisms pose significant treatment challenges due to their heightened resistance to antimicrobial agents. Hence, the quest for active compounds capable of impeding microbial biofilm development stands as a pivotal pursuit in biomedical research. This study presents findings concerning the impact of three surfactants, namely, polysorbate 20 (T20), polysorbate 80 (T80), and sodium dodecyl sulfate (SDS), on the initial stage of biofilm development in both Staphylococcus aureus and Candida dubliniensis. In contrast to previous investigations, we conducted a comparative assessment of the biofilm development capacity of these two taxonomically distant groups, predicated on their shared ability to reduce TTC. The common metabolic trait shared by S. aureus and C. dubliniensis in reducing TTC to formazan facilitated a simultaneous evaluation of biofilm development under the influence of surfactants across both groups. Our results revealed that surfactants could impede the development of biofilms in both species by disrupting the initial cell attachment step. The observed effect was contingent upon the concentration and type of compound, with a higher inhibition observed in culture media supplemented with SDS. At maximum concentrations (5%), T20 and T80 significantly curtailed the formation and viability of S. aureus and C. dubliniensis biofilms. Specifically, T20 inhibited biofilm development by 75.36% in S. aureus and 71.18% in C. dubliniensis, while T80 exhibited a slightly lower inhibitory effect, with values ranging between 66.68% (C. dubliniensis) and 65.54% (S. aureus) compared to the controls. Incorporating these two non-toxic surfactants into pharmaceutical formulations could potentially enhance the inhibitory efficacy of selected antimicrobial agents, particularly in external topical applications.

Methicillin-Resistant Staphylococcus aureus and Coagulase-Negative Staphylococcus from School Dining Rooms in Argentina

Methicillin-resistant Staphylococcus aureus (MRSA) constitutes an important cause for concern in the field of public health, and the role of the food chain in the transmission of this pathogen and in antimicrobial resistance (AMR) has not yet been defined. The objectives of this work were to isolate and characterize coagulase-positive Staphylococcus (CoPS) and coagulase-negative Staphylococcus (CoNS), particularly S. aureus, from school dining rooms located in Argentina. From 95 samples that were obtained from handlers, inert surfaces, food, and air in 10 establishments, 30 Staphylococcus strains were isolated. Four isolates were S. aureus, and the remaining ones (N = 26) belonged to 11 coagulase-negative species (CoNS). The isolates were tested for susceptibility to nine antibiotics. The presence of genes encoding toxins (luk-PV, sea, seb, sec, sed, and see), adhesins (icaA, icaD), and genes that confer resistance to methicillin (mecA) and vancomycin (vanA) was investigated. The resistance rates measured for penicillin, cefoxitin, gentamicin, vancomycin, erythromycin, clindamycin, levofloxacin, trimethoprim-sulfamethoxazole, and tetracycline were 73%, 30%, 13%, 3%, 33%, 17%, 13%, 7%, and 7% of the isolates, respectively. Seventeen AMR profiles were detected, and 11 isolates were multidrug resistant (MDR). Seven methicillin-resistant Staphylococcus isolates were detected in the hands of handlers from four establishments, two of them were MRSA. Two S. aureus isolates presented icaA and icaD, another one, only icaD. The gene vanA was found in two isolates. In relation to S. aureus, resistance to vancomycin but not to gentamicin was detected. School feeding plays a key role in the nutrition of children, and the consumption of food contaminated with MRSA and vancomycin-resistant S. aureus (VRSA) can be a serious threat to health. In particular, it was detected that the handlers were the source of MRSA, VRSA, MR-CoNS (methicillin-resistant coagulase-negative Staphylococcus), and MDR isolates. The results obtained indicate that the vigilance of this pathogen in school dining rooms should be extreme.

Biofilm-Producing Ability of Staphylococcus aureus Obtained from Surfaces and Milk of Mastitic Cows

This study was conducted to evaluate the incidence of mastitis in 153 dairy cows and to evaluate the kinetics of adhesion of isolates obtained from surfaces and milk in comparison with the reference strain (RS), CCM 4223. The surfaces of the floor, teat cup, and cow restraints were aseptically swabbed in three replicates (n = 27). Of the total number of infected cows (n = 43), 11 samples were found to be positive for Staphylococcus aureus, 12 samples tested positive for non-aureus staphylococci, 6 samples tested positive for Streptococcus spp., and 11 samples tested positive for other bacteria (Escherichia coli, Pseudomonas spp.) or a mixed infection. The most represented pathogen in milk (11/43) and on surfaces (14/27) was S. aureus. The kinetics of adhesion of the reference strain and isolates of S. aureus on stainless steel surfaces were determined after 3, 6, 9, 12, 24, and 48 h, and 3, 6, 9, 12, and 15 days of incubation. All strains reached counts higher than 5 Log₁₀ CFU/cm² needed for biofilm formation, except RS (4.40 Log₁₀ CFU/cm²). The isolates of S. aureus revealed a higher capability to form biofilm in comparison with RS during the first 3 h (p < 0.001). Thus, there is a significant difference between the occurrence of S. aureus on monitored surfaces-floor, teat cup, and cow restraints-and the frequency with which mastitis is caused by S. aureus (p < 0.05). This finding raises the possibility that if various surfaces are contaminated by S. aureus, it can result in the formation of biofilm, which is a significant virulence factor.

Molecular Analysis of Pathogenicity, Adhesive Matrix Molecules (MSCRAMMs) and Biofilm Genes of Coagulase-Negative Staphylococci Isolated from Ready-to-Eat Food

This paper provides a snapshot on the pathogenic traits within CoNS isolated from ready-to-eat (RTE) food. Eighty-five strains were subjected to biofilm and slime production, as well as biofilm-associated genes (icaA, icaD, icaB, icaC, eno, bap, bhp, aap, fbe, embP and atlE), the insertion sequence elements IS256 and IS257 and hemolytic genes. The results showed that the most prevalent determinants responsible for the primary adherence were eno (57.6%) and aap (56.5%) genes. The icaADBC operon was detected in 45.9% of the tested strains and was correlated to slime production. Moreover, most strains carrying the icaADBC operon simultaneously carried the IS257 insertion sequence element. Among the genes encoding for surface proteins involved in the adhesion to abiotic surfaces process, atlE was the most commonly (31.8%) followed by bap (4.7%) and bhp (1.2%). The MSCRAMMs, including fbe and embp were detected in the 11.8% and 28.2% of strains, respectively. A high occurrence of genes involved in the hemolytic toxin production were detected, such as hla_yiD (50.6%), hlb (48.2%), hld (41.2%) and hla_haem (34.1%). The results of the present study revealed an unexpected occurrence of the genes involved in biofilm production and the high hemolytic activity among the CoNS strains, isolated from RTE food, highlighting that this group seems to be acquiring pathogenic traits similar to those of S. aureus, suggesting the need to be included in the routine microbiological analyses of food.

Influence of Environmental Factors on Biofilm Formation of Staphylococci Isolated from Wastewater and Surface Water

The presence of biofilms can negatively affect several different areas, such as the food industry, environment, and biomedical sectors. Conditions under which bacteria grow and develop, such as temperature, nutrients, and pH, among others, can largely influence biofilm production. Staphylococcus species survive in the natural environment due to their tolerance to a wide range of temperatures, dryness, dehydration, and low water activity. Therefore, we aimed to evaluate the influence of external environmental factors on the formation of biofilm of staphylococci isolated from hospital wastewater and surface waters. We investigated the biofilm formation of methicillin-resistant and -susceptible S. aureus (MRSA and MSSA) and coagulase-negative staphylococci (CoNS) under various temperatures, pH values, salt concentrations, glucose concentrations, and under anaerobic and aerobic conditions. CoNS had the ability to produce more biofilm biomass than MSSA and MRSA. All environmental factors studied influenced the biofilm formation of staphylococci isolates after 24 h of incubation. Higher biofilm formation was achieved at 4% of NaCl and 0.5% of glucose for MSSA and CoNS, and 1% of NaCl and 1.5% of glucose for MRSA isolates. Biofilm formation of isolates was greater at 25 °C and 37 °C than at 10 °C and 4 °C. pH values between 6 and 8 led to more robust biofilm formation than pH levels of 9 and 5. Although staphylococci are facultative anaerobes, biofilm formation was higher in the presence of oxygen. The results demonstrated that multiple environmental factors affect staphylococci biofilm formation. Different conditions affect differently the biofilm formation of MRSA, MSSA, and CoNS strains.

Biofilms as a microbial hazard in the food industry: A scoping review

Biofilms pose a serious public health hazard with a significant economic impact on the food industry. The present scoping review is designed to analyze the literature published during 2001-2020 on biofilm formation of microbes, their detection methods, and association with antimicrobial resistance (if any). The peer-reviewed articles retrieved from 04 electronic databases were assessed using PRISMA-ScR guidelines. From the 978 preliminary search results, a total of 88 publications were included in the study. On analysis, the commonly isolated pathogens were Listeria monocytogenes, Staphylococcus aureus, Salmonella spp., Escherichia coli, Bacillus spp., Vibrio spp., Campylobacter jejuni and Clostridium perfringens. The biofilm-forming ability of microbes was found to be influenced by various factors such as attachment surfaces, temperature, presence of other species, nutrient availability etc. A total of 18 studies characterized the biofilm-forming genes, particularly for S. aureus, Salmonella spp., and E. coli. In most studies, polystyrene plate and/or stainless-steel coupons were used for biofilm formation, and the detection was carried out by crystal violet assays and/or by plate counting method. The strain-specific significant differences in biofilm formation were observed in many studies, and few studies carried out analysis of multi-species biofilms. The association between biofilm formation and antimicrobial resistance wasn't clearly defined. Further, viable but non-culturable (VBNC) form of the foodborne pathogens is posing an unseen (by conventional cultivation techniques) but potent threat food safety. The present review recommends the need for carrying out systematic surveys and risk analysis of biofilms in food chain to highlight the evidence-based public health concerns, especially in regions where microbiological food hazards are quite prevalent.

Degradation of Staphylococcus aureus Biofilm Using Hydrolytic Enzymes Produced by Amazonian Endophytic Fungi

Microbial biofilms can cause serious health problems, since, due to their persistent character, they often function as spreaders of contaminants. Hydrolytic enzymes have a number of industrial applications and have been indicated as an alternative to the traditional chemical methods that are used to eradicate microbial biofilms. In this study, we evaluated the ability of enzymatic extracts produced by endophytic fungi isolated from the Amazonian species Myrcia guianensis to remove Staphylococcus aureus biofilms. After culture in liquid medium, the fungal hydrolytic extracts showed amylase (3.77 U/mL), lipase (3.84 U/mL), protease (3.63 U/mL), and xylanase (2.91 U/mL) activity. A 24 h mature S. aureus ATCC6538 biofilm was exposed to each enzyme extract with standardized enzyme activities for 10, 30, and 60 min. The optical density at 630 nm was used to calculate the growth rate (GR%) and the residual biofilm rate (RBR%). The most promising solutions were used in combination, based on a 24 factorial design for 0, 10, 20, and 30 min of exposure. Lipase and protease solutions, when applied separately, were the most effective, and promoted the complete removal of S. aureus biofilms in t10 (lipase) and t30 and t60 (lipase and protease). Of the combined treatments using 1.0 U/mL protease and 0.4 U/mL lipase, total biofilm degradation was observed for all exposure times. Thus, the hydrolases produced by the Amazonian endophytic fungi evaluated here are highlighted as an interesting tool in the fight against microbial biofilms.

Biofilm formation, icaABCD genes and agr genotyping of Staphylococcus aureus from fish and ground beef

A total of 46 Staphylococcus aureus isolates from fish and ground beef were tested for the agr types, icaABCD genes, and biofilm formation at 12, 25 and 37 °C by the microtiter plate and the MTT assays. All isolates were positive for the icaABD genes, while 97.8% were positive for the icaC. All isolates produced biofilms at 37 and 25 °C, but 93.5% of them were also biofilm producers at 12 °C. There was no significant difference in biofilm formation between 25 and 37 °C using the crystal violet assay (P > 0.05). However, statistically significant differences were detected between 12 and 25 °C as well as 12 and 37 °C (P < 0.05). All isolates were significantly different in biofilm production by the MTT assay at all tested temperatures. Furthermore, a relationship between the presence of the icaABCD genes and biofilm formation was observed. The agr type I was the most prevalent (54.4%) among the isolates, followed by agr type II (41.3%) and agr type III (9.6%). In this study, the S. aureus isolates exhibited biofilm formation ability responsible for persistence of bacteria in foods, which may lead to food spoilage and human health problems.

Review on Stress Tolerance in Campylobacter jejuni

Campylobacter spp. are the leading global cause of bacterial colon infections in humans. Enteropathogens are subjected to several stress conditions in the host colon, food complexes, and the environment. Species of the genus Campylobacter, in collective interactions with certain enteropathogens, can manage and survive such stress conditions. The stress-adaptation mechanisms of Campylobacter spp. diverge from other enteropathogenic bacteria, such as Escherichia coli, Salmonella enterica serovar Typhi, S. enterica ser. Paratyphi, S. enterica ser. Typhimurium, and species of the genera Klebsiella and Shigella. This review summarizes the different mechanisms of various stress-adaptive factors on the basis of species diversity in Campylobacter, including their response to various stress conditions that enhance their ability to survive on different types of food and in adverse environmental conditions. Understanding how these stress adaptation mechanisms in Campylobacter, and other enteric bacteria, are used to overcome various challenging environments facilitates the fight against resistance mechanisms in Campylobacter spp., and aids the development of novel therapeutics to control Campylobacter in both veterinary and human populations.

Strain variability in biofilm formation: A food safety and quality perspective

The inherent differences in microbial behavior among identically treated strains of the same microbial species, referred to as "strain variability", are regarded as an important source of variability in microbiological studies. Biofilms are defined as the structured multicellular communities with complex architecture that enable microorganisms to grow adhered to abiotic or living surfaces and constitute a fundamental aspect of microbial ecology. The research studies assessing the strain variability in biofilm formation are relatively few compared to the ones evaluating other aspects of microbial behavior such as virulence, growth and stress resistance. Among the available research data on intra-species variability in biofilm formation, compiled and discussed in the present review, most of them refer to foodborne pathogens as compared to spoilage microorganisms. Molecular and physiological aspects of biofilm formation potentially related to strain-specific responses, as well as information on the characterization and quantitative description of this type of biological variability are presented and discussed. Despite the considerable amount of available information on the strain variability in biofilm formation, there are certain data gaps and still-existing challenges that future research should cover and address. Current and future advances in systems biology and omics technologies are expected to aid significantly in the explanation of phenotypic strain variability, including biofilm formation variability, allowing for its integration in microbiological risk assessment.

Biofilm Production Ability, Virulence and Antimicrobial Resistance Genes in Staphylococcus aureus from Various Veterinary Hospitals

: Staphylococcus aureus (S. aureus) is one of the most clinically important zoonotic pathogens, but an understanding of the prevalence, biofilm formulation ability, virulence, and antimicrobial resistance genes of S. aureus from veterinary hospitals is lacking. By characterizing S. aureus in different origins of veterinary hospitals in Guangzhou, China, in 2019, we identified with the presence of S. aureus in pets (17.1%), veterinarians (31.7%), airborne dust (19.1%), environmental surfaces (4.3%), and medical device surfaces (10.8%). Multilocus sequence typing (MLST) and Staphylococcus protein A (spa) typing analyses demonstrated methicillin-sensitive S. aureus (MSSA) ST398-t571, MSSA ST188-t189, and methicillin-resistant S. aureus (MRSA) ST59-t437 were the most prevalent lineage. S. aureus with similar pulsed-field gel electrophoresis (PFGE) types distributed widely in different kinds of samples. The crystal violet straining assays revealed 100% (3/3) of MRSA ST59 and 81.8% (9/11) of MSSA ST188 showed strong biofilm formulation ability, whereas other STs (ST1, ST5, ST7, ST15, ST88, ST398, ST3154 and ST5353) showed weak biofilm production ability. Polymerase chain reaction (PCR) confirmed the most prevalent leucocidin, staphylococcal enterotoxins, ica operon, and adhesion genes were lukD-lukE (49.0%), sec-sel (15.7%), icaA-icaB-icaC-icaR (100.0%), and fnbB-cidA-fib-ebps-eno (100.0%), respectively. Our study showed that the isolates with strong biofilm production ability had a higher prevalence in clfA, clfB, fnbA and sdrC genes compared to the isolates with weak biofilm production ability. Furthermore, 2 ST1-MRSA isolates with tst gene and 1 ST88-MSSA isolate with lukS/F-PV gene were detected. In conclusion, the clonal dissemination of S. aureus of different origins in veterinary hospitals may have occurred; the biofilm production capacity of S. aureus is strongly correlated with ST types; some adhesion genes such as clfA, clfB, fnbA, and sdrC may pose an influence on biofilm production ability and the emergence of lukS/F-PV and tst genes in S. aureus from veterinary hospitals should raise our vigilance.

Environmental factors modulate biofilm formation by Staphylococcus aureus

Biofilm formation on indwelling medical devices represents an exclusive evasion mechanism for many pathogenic bacteria to establish chronic infections. Staphylococcus aureus is one of the major bacterial pathogens that are able to induce both animal and human infections. The continued emergence of multiple drug-resistant S. aureus, especially methicillin-resistant S. aureus, is problematic due to limited treatment options. Biofilm formation by S. aureus complicates the treatment of methicillin-resistant S. aureus infections. Therefore, elucidating the mechanisms of biofilm formation in this pathogen is important for the development of alternative therapeutic strategies. Various environmental and genetic factors contribute to biofilm formation. In this review, we address the environmental factors and discuss how they affect biofilm formation by S. aureus.

Biofilm formation and prevalence of adhesion genes among Staphylococcus aureus isolates from different food sources

To assess biofilm formation ability and identify differences in the prevalence of genes involved in biofilm formation among Staphylococcus aureus strains isolated from different food samples, the ability of biofilm formation among 97 S. aureus strains was evaluated using a colorimetric microtiter plate assay. Thirteen genes encoding microbial surface components recognizing adhesive matrix molecules, and the intracellular adhesion genes were detected by PCR using specific primers. Approximately 72% of the isolates produced biofilms. Among these isolates, 54.64% were weak biofilm producers, while 14.43% and 3.09% produced moderate and strong biofilms, respectively. The icaADBC, clfA/B, cidA, and fib genes were detected in all the S. aureus strains, whereas the bap gene was not present in any of the strains. The occurrence of other adhesin genes varied greatly between biofilm‐producing and nonbiofilm‐producing strains. However, a significant difference was observed between these two groups with respect to the fnbpB, cna, ebps, and sdrC genes. No obvious evidence was found to support the link between PFGE strain typing and the capacity for biofilm formation. Considerable variation in biofilm formation ability was observed among S. aureus strains isolated from food samples. The prevalence of adhesin‐encoding genes also varied greatly within strains. This study highlights the importance of biofilm formation and the adhesins of S. aureus strains in food samples.

Phenotypic and genotypic characterization of Staphylococcus spp. isolated from mastitis milk and cheese processing: Study of adherence and biofilm formation

The aim of this study was to identify the phenotypic and genotypic profiles of Staphylococcus spp. isolated from mastitis milk and cheese processing plant.To evaluate the biofilm production of wild-type strains on contact surfaces by testing different factors through adhered cells and biofilm quantifications, finally, these biofilms were observed by Scanning Electron Microscopy (SEM). Congo red agar (CRA) plate method was used to identify slime production by strains. Screening of genes encoding adhesion factors and biofilm formation was carried out using PCR. After strains selection, adhesion and biofilm assays were designed testing different times (12, 48, 96 h), strains (n = 13), contact surfaces (stainless steel and polypropylene), and temperatures (5 °C and 25 °C); and then, bacterial count and crystal violet staining were conducted. Relative frequencies of positive on CRA and genes presence were determined, and Friedman test was applied for bacterial counts and OD values. Additionally, significant factors (P ≤ .05) were subjected to multiple comparisons using the Nemenyi test. The slime production in CRA was observed by visual inspection in 38.7% of strains. A large distribution of genes was described among strains, implying a high variability of genotypic profiles. Moreover, relative frequencies of CRA positive and gene presence were described. The developed assay showed that the strain, temperature, contact surface, were significant for both variables. The SEM corroborated the findings, showing greater biofilm formation on stainless steel at 25 °C. Thus, it is essential to highlight the importance of temperature control and material with low superficial energy to avoid biofilm formation by staphylococci.

icaA Gene of Staphylococcus aureus Responds to NaCl, Leading to Increased Biofilm Formation

The objective of this study was to elucidate the role of the icaA gene in biofilm formation of Staphylococcus aureus exposed to NaCl. The icaA-deletion mutant of S. aureus ATCC 13565 was constructed with the temperature-sensitive plasmid pIMAY. Microtiter plate assays were performed to confirm biofilm formation for both the wild type and the mutant at 0% (control), 2, 4, and 6% NaCl. The microtiter plate assay revealed that biofilm formation by the wild type increased ( P < 0.05) as NaCl concentration increased, but biofilm formation of the mutant was not affected by NaCl concentration. Biofilm formation by the mutant was lower ( P < 0.05) than that by the wild type. These results indicate that icaA plays an important role in biofilm formation by S. aureus when the pathogen is exposed to NaCl.

Biofilm formation and control strategies of foodborne pathogens: food safety perspectives

Foodborne pathogens are the main factors behind foodborne diseases and food poisoning and thus pose a great threat to food safety.

Adhesiveness of opportunistic Staphylococcus aureus to materials used in dental office: In vitro study

Staphylococcus aureus (S. aureus) is one of several opportunistic microbial pathogens associated with many healthcare problems. In the present study, S. aureus was assessed for its biofilm-forming ability on materials routinely used in dental offices, including stainless steel (SS), polyethylene (PE), and polyvinyl chloride (PVC). Materials that were tested were characterized for roughness (Ra) and surface free energy (SFE). The adhesion forces exerted by S. aureus to each substratum were investigated using atomic force microscopy (AFM), and biofilm formation was quantitatively assessed by crystal violet staining assay. AFM measurements demonstrated that the strongest adhesion forces (20 nN) were exerted on the PE surfaces (P < 0.05) and depended more on Ra. In addition, the results of biofilm formation capability indicated that S. aureus exhibited more affinity to SS materials when compared to the other materials (P < 0.05). This ability of biofilm formation seems to be more correlated to SFE (R = 0.65). Hence, control of the surface properties of materials used in dental practices is of crucial importance for preventing biofilm formation on dental materials to be used for patients' dental care.

Laurus nobilis, Zingiber officinale and Anethum graveolens Essential Oils: Composition, Antioxidant and Antibacterial Activities against Bacteria Isolated from Fish and Shellfish

Several bacterial strains were isolated from wild and reared fish and shellfish. The identification of these strains showed the dominance of the Aeromonas hydrophila species in all seafood samples, followed by Staphylococcus spp., Vibrio alginolyticus, Enterobacter cloacae, Klebsiella ornithinolytica, Klebsiella oxytoca and Serratia odorifera. The isolates were studied for their ability to produce exoenzymes and biofilms. The chemical composition of the essential oils from Laurus nobilis leaves, Zingiber officinale rhizomes and Anethum graveolens aerial parts was studied by GC and GC/MS. The essential oils' antioxidant and antibacterial activities against the isolated microorganisms were studied. Low concentrations of the three essential oils were needed to inhibit the growth of the selected bacteria and the lowest MBCs values were obtained for the laurel essential oil. The selected essential oils can be used as a good natural preservative in fish food due to their antioxidant and antibacterial activities.

Resilience in the Face of Uncertainty: Sigma Factor B Fine-Tunes Gene Expression To Support Homeostasis in Gram-Positive Bacteria

Gram-positive bacteria are ubiquitous and diverse microorganisms that can survive and sometimes even thrive in continuously changing environments. The key to such resilience is the ability of members of a population to respond and adjust to dynamic conditions in the environment. In bacteria, such responses and adjustments are mediated, at least in part, through appropriate changes in the bacterial transcriptome in response to the conditions encountered. Resilience is important for bacterial survival in diverse, complex, and rapidly changing environments and requires coordinated networks that integrate individual, mechanistic responses to environmental cues to enable overall metabolic homeostasis. In many Gram-positive bacteria, a key transcriptional regulator of the response to changing environmental conditions is the alternative sigma factor σ(B) σ(B) has been characterized in a subset of Gram-positive bacteria, including the genera Bacillus, Listeria, and Staphylococcus Recent insight from next-generation-sequencing results indicates that σ(B)-dependent regulation of gene expression contributes to resilience, i.e., the coordination of complex networks responsive to environmental changes. This review explores contributions of σ(B) to resilience in Bacillus, Listeria, and Staphylococcus and illustrates recently described regulatory functions of σ(B).

Bacteriophages as Weapons Against Bacterial Biofilms in the Food Industry

Microbiological contamination in the food industry is often attributed to the presence of biofilms in processing plants. Bacterial biofilms are complex communities of bacteria attached to a surface and surrounded by an extracellular polymeric material. Their extreme resistance to cleaning and disinfecting processes is related to a unique organization, which implies a differential bacterial growth and gene expression inside the biofilm. The impact of biofilms on health, and the economic consequences, has promoted the development of different approaches to control or remove biofilm formation. Recently, successful results in phage therapy have boosted new research in bacteriophages and phage lytic proteins for biofilm eradication. In this regard, this review examines the environmental factors that determine biofilm development in food-processing equipment. In addition, future perspectives for the use of bacteriophage-derived tools as disinfectants are discussed.

Compositional Analysis of Biofilms Formed by Staphylococcus aureus Isolated from Food Sources

Sixteen Staphylococcus aureus isolates originating from foods (eight from dairy products, five from fish and fish products and three from meat and meat products) were evaluated regarding their biofilms formation ability. Six strains (E2, E6, E8, E10, E16, and E23) distinguished as strong biofilm formers, either in standard Tryptic Soy Broth or in Tryptic Soy Broth supplemented with 0.4% glucose or with 4% NaCl. The composition of the biofilms formed by these S. aureus strains on polystyrene surfaces was first inferred using enzymatic and chemical treatments. Later on, biofilms were characterized by confocal laser scanning microscope (CLSM). Our experiments proved that protein-based matrices are of prime importance for the structure of biofilms formed by S. aureus strains isolated from food sources. These biofilm matrix compositions are similar to those put into evidence for coagulase negative staphylococci. This is a new finding having in view that scientific literature mentions exopolysaccharide abundance in biofilms produced by clinical isolates and food processing environment isolates of S. aureus.

Impact of growth temperature and surface type on the resistance of Pseudomonas aeruginosa and Staphylococcus aureus biofilms to disinfectants

Biofilm formation of Pseudomonas aeruginosa and Staphylococcus aureus on food-contact-surfaces represents a significant risk for the public health. In this context, the present study investigates the relationship between the environmental conditions of biofilm formation and the resistance to disinfectants. Therefore, a static biofilm reactor, called NEC-Biofilm System, was established in order to study the effect of growth temperature (20, 30 and 37°C), and of the surface type (stainless steel and polycarbonate), on biofilm resistance to disinfectants. These conditions were selected to mimic the biofilm formation on abiotic surfaces of food processing industries. The antibiofilm assays were performed on biofilms grown during 24 h. The results showed that the growth temperature influenced significantly the biofilm resistance to disinfectants. These data also revealed that the growth temperature has a significant effect on the biofilm structure of both bacteria. Furthermore, the increase of the biofilm growth temperature increased significantly the algD transcript level in sessile P. aeruginosa cells, whereas the icaA one was not affected in S. aureus cells. Overall, our findings show that the biofilm structure and matrix cannot fully explain the biofilm resistance to disinfectant agents. Nevertheless, it underlines the intimate link between environmental conditions, commonly met in food sectors, and the biofilm resistance to disinfectants.

Individual Constituents from Essential Oils Inhibit Biofilm Mass Production by Multi-Drug Resistant Staphylococcus aureus

Biofilm formation by Staphylococcus aureus represents a problem in both the medical field and the food industry, because the biofilm structure provides protection to embedded cells and it strongly attaches to surfaces. This circumstance is leading to many research programs seeking new alternatives to control biofilm formation by this pathogen. In this study we show that a potent inhibition of biofilm mass production can be achieved in community-associated methicillin-resistant S. aureus (CA-MRSA) and methicillin-sensitive strains using plant compounds, such as individual constituents (ICs) of essential oils (carvacrol, citral, and (+)-limonene). The Crystal Violet staining technique was used to evaluate biofilm mass formation during 40 h of incubation. Carvacrol is the most effective IC, abrogating biofilm formation in all strains tested, while CA-MRSA was the most sensitive phenotype to any of the ICs tested. Inhibition of planktonic cells by ICs during initial growth stages could partially explain the inhibition of biofilm formation. Overall, our results show the potential of EOs to prevent biofilm formation, especially in strains that exhibit resistance to other antimicrobials. As these compounds are food additives generally recognized as safe, their anti-biofilm properties may lead to important new applications, such as sanitizers, in the food industry or in clinical settings.

Immobilized Hydrolytic Enzymes Exhibit Antibiofilm Activity Against Escherichia coli at Sub-Lethal Concentrations

The effects of two commercially available immobilized enzymes (namely the glycosidase pectinase and the protease subtilisin A) at sub-lethal concentrations were investigated in terms of their influence on biofilm genesis, on the composition of the biofilm matrix, and their antibiotic synergy against Escherichia coli biofilm, used as a model system of bacterial biofilms. The best antibiofilm performance of solid-supported hydrolases was obtained at the surface concentration of 0.022 and 0.095 U/cm(2) with a reduction of 1.2 and 2.3 log CFU/biofilm for pectinase and subtilisin, respectively. At these enzyme surface concentrations, the biocatalysts affected the structural composition of the biofilm matrix, impacting biofilm thickness. Finally, the immobilized hydrolases enhanced biofilm sensitivity to a clinically relevant concentration of the antibiotic ampicillin. At the final antibiotic concentration of 0.1 mg/ml, a reduction of 2 and 3.5 log10 units in presence of 0.022 Upectinase/cm(2) and 0.095 Usubtilisin/cm(2) was obtained, respectively, in comparison the antibiotic alone. Immobilized pectinase and subtilisin at sub-lethal concentrations demonstrated a great potential for antibiofilm applications.

Effect of temperature on the release of carvacrol and cinnamaldehyde incorporated into polymeric systems to control growth and biofilms of Escherichia coli and Staphylococcus aureus

This study assessed the effect of temperature on the release of essential oil components incorporated by melt compounding into polymeric films. Specifically, polyethylene-co-vinylacetate (EVA) films containing carvacrol (CAR) and cinnamaldehyde (ALD), alone and in combination, were prepared and their surface and mechanical properties and antibacterial and anti-biofilm activity against Escherichia coli and Staphylococcus aureus were evaluated. The addition of ALD and CAR did not provoke variation in the surface morphology of EVA and allowed their delivery. At 37°C, films containing CAR, ALD or their combination (25+75%) were found to have the strongest bactericidal effect, whereas at lower temperatures a lower killing rate was observed. There was no clear evidence of the influence of temperature on the anti-biofilm activity of the essential oil component-based polymeric films. The biomass formed on EVA containing ALD, CAR or their combination (25+75) was significantly lower (60-80% reduction) than that formed on the EVA control at both 37° and 22°C.

Bovicin HC5 and nisin reduce Staphylococcus aureus adhesion to polystyrene and change the hydrophobicity profile and Gibbs free energy of adhesion

Staphylococcus aureus is an opportunistic pathogen often multidrug-resistant that not only causes a variety of human diseases, but also is able to survive on biotic and abiotic surfaces through biofilm communities. The best way to inhibit biofilm establishment is to prevent cell adhesion. In the present study, subinhibitory concentrations of the bacteriocins bovicin HC5 and nisin were tested for their capability to interfere with the adhesion of S. aureus to polystyrene. Subinhibitory dosages of the bacteriocins reduced cell adhesion and this occurred probably due to changes in the hydrophobicity of the bacterial cell and polystyrene surfaces. After treatment with bovicin HC5 and nisin, the surfaces became more hydrophilic and the free energy of adhesion (∆G(adhesion)) between bacteria and the polystyrene surface was unfavorable. The transcriptional level of selected genes was assessed by RT-qPCR approach, revealing that the bacteriocins affected the expression of some important biofilm associated genes (icaD, fnbA, and clfB) and rnaIII, which is involved in the quorum sensing mechanism. The conditioning of food-contact surfaces with bacteriocins can be an innovative and powerful strategy to prevent biofilms in the food industry. The results are relevant for food safety as they indicate that bovicin HC5 and nisin can inhibit bacterial adhesion and consequent biofilm establishment, since cell adhesion precedes biofilm formation.

Effect of NaCl on Biofilm Formation of the Isolate from Staphylococcus aureus Outbreak Linked to Ham

The objective of this study was to evaluate the effects of NaCl on the biofilm formations of the isolate from Staphylococcus aureus outbreaks linked to ham. The S. aureus ATCC13565 isolated from ham was exposed to NaCl concentrations of 0%, 2%, 4%, and 6% supplemented in tryptic soy broth (TSB) for 24 h at 35℃, followed by plating 0.1 mL of the culture on tryptic soy agar containing 0%, 2%, 4%, and 6% NaCl, respectively. After incubating at 35℃ for 24 h, the colonies on the plates were collected and diluted to OD600 = 0.1. The diluents of S. aureus were incubated on a 96-well flat bottom plate containing TSB plus the appropriate NaCl concentrations, and the biofilm formation was quantified by crystal violet staining after being incubated at 35℃ for 9 h. Confocal laser scanning microscope (CLSM) was also used for visualizing the biofilm formation of S. aureus at NaCl concentrations of 0%, 2%, 4%, and 6%. The transcriptional analysis of biofilm-related genes, such as icaA, atl, clfA, fnbA, sarA, and rbf, was conducted by quantitative real-time PCR. Crystal violet staining and CLSM showed that the biofilm formations of S. aureus increased (p<0.05) along with the NaCl concentrations. Moreover, the expression of the icaA genes was higher at the NaCl concentrations of 4% and 6% as compared with 0% of NaCl by approximately 9-folds and 20-folds, respectively. These results indicated that the NaCl formulated in processed food may increase the biofilm formations of S. aureus by increasing the icaA gene expressions.

Biofilm formation and persistence on abiotic surfaces in the context of food and medical environments

The biofilm formation on abiotic surfaces in food and medical sectors constitutes a great public health concerns. In fact, biofilms present a persistent source for pathogens, such as Pseudomonas aeruginosa and Staphylococcus aureus, which lead to severe infections such as foodborne and nosocomial infections. Such biofilms are also a source of material deterioration and failure. The environmental conditions, commonly met in food and medical area, seem also to enhance the biofilm formation and their resistance to disinfectant agents. In this regard, this review highlights the effect of environmental conditions on bacterial adhesion and biofilm formation on abiotic surfaces in the context of food and medical environment. It also describes the current and emergent strategies used to study the biofilm formation and its eradication. The mechanisms of biofilm resistance to commercialized disinfectants are also discussed, since this phenomenon remains unclear to date.

Staphylococcal biofilm formation as affected by type acidulant

Staphylococcal growth and biofilm formation in culture medium where pH was lowered with weak organic (acetic and lactic) or strong inorganic (hydrochloric) acids were studied. The effects were evaluated by biomass measurements, cell-surface hydrophobicity, scanning electron microscopy (SEM), and confocal laser scanning microscopy (CLSM). The results demonstrated that the inhibition was related to type of acidulant and pH value. At pH 5.0, the antibacterial effect was more pronounced in the presence of acetic acid (58-60% growth reduction) compared with that in the presence of lactic (7-16% growth reduction) and hydrochloric acids (23-24% reduction). The biofilm biomass of Staphylococcus aureus and Staphylococcus epidermidis was reduced by 92, 85, 63, and 93, 87, 81% after exposition to acetic, lactic, and hydrochloric acids, respectively. Increasing the pH from 5.0 to 6.0 resulted in a noticeable reduction in the effectiveness of acids. A minor cells hydrophobic character was also documented. The SEM and CLSM revealed a poorly structured and thinner biofilm compared with the dense and multilayered control. Acidic environment could have important implications for food-processing system to prevent bacterial colonization and control biofilm formation. The findings of this study lead to consider the rational use of the type of acid to achieve acidic environments.