Influence of reaction time and synthesis temperature on the physical properties of ZnO nanoparticles synthesized by the hydrothermal method

Unveiling Crucial Chemical Processing Parameters Influencing the Performance of Solution-Processed Inorganic Thermoelectric Materials

Production of thermoelectric materials from solution-processed particles involves the synthesis of particles, their purification and densification into pelletized material. Chemical changes that occur during each one of these steps render them performance determining. Particularly the purification steps, bypassed in conventional solid-state synthesis, are the cause for large discrepancies among similar solution-processed materials. In present work, the investigation focuses on a water-based surfactant free solution synthesis of SnSe, a highly relevant thermoelectric material. We show and rationalize that the number of leaching steps, purification solvent, annealing, and annealing atmosphere have significant influence on the Sn : Se ratio and impurity content in the powder. Such compositional changes that are undetectable by conventional characterization techniques lead to distinct consolidated materials with different types and concentration of defects. Additionally, the profound effect on their transport properties is demonstrated. We emphasize that understanding the chemistry and identifying key chemical species and their role throughout the process is paramount for optimizing material performance. Furthermore, we aim to demonstrate the necessity of comprehensive reporting of these steps as a standard practice to ensure material reproducibility.

Study on the Synthesis of Nano Zinc Oxide Particles under Supercritical Hydrothermal Conditions

The supercritical hydrothermal synthesis of nanomaterials has gained significant attention due to its straightforward operation and the excellent performance of the resulting products. In this study, the supercritical hydrothermal method was used with Zn(CH3COO)2·2H2O as the precursor and deionized water and ethanol as the solvent. Nano-ZnO was synthesized under different reaction temperatures (300~500 °C), reaction times (5~15 min), reaction pressures (22~30 MPa), precursor concentrations (0.1~0.5 mol/L), and ratios of precursor to organic solvent (C2H5OH) (2:1~1:4). The effects of synthesis conditions on the morphology and size of ZnO were studied. It was found that properly increasing hydrothermal temperature and pressure and extending the hydrothermal time are conducive to the more regular morphology and smaller size of ZnO particles, which is mainly achieved through the change of reaction conditions affecting the hydrothermal reaction rate. Moreover, the addition of ethanol makes the morphology of nano-zno more regular and significantly inhibits the agglomeration phenomenon. In addition to the change in physical properties of the solvent, this may also be related to the chemical bond established between ethanol and ZnO. The results show that the optimum synthesis conditions of ZnO are 450 °C, 26 MPa, 0.3 mol/L, 10 min, and the molar ratio of precursor to ethanol is 1:3.

Ultrasmall iron-doped zinc oxide nanoparticles for ferroptosis assisted sono-chemodynamic cancer therapy

The efficacy and biosafety of sonodynamic therapy (SDT) are closely related to the properties of sonosensitizers. Inorganic sonosensitizers with high chemical stability and low dark toxicity are generally limited by slow metabolism and accumulation in vivo. Combined treatment strategies by inducing more redox imbalance are expected to improve the efficacy of sonodynamic antitumor therapy. Herein, we report the development of ultra-small iron-doped zinc oxide nanoparticles (FZO NPs) to achieve synergistic sono-chemodynamic therapy and low accumulation in vivo. The surface of FZO NPs with diameter of 5 nm was modified with 3-aminopropyltriethoxysilane and polyethylene glycol 600 to obtain FZO-ASP with good aqueous stability. FZO-ASP with iron doping could trigger Fenton reaction and induce ferroptosis in cancer cells. With the assistance of ultrasonic energy, FZO-ASP demonstrated enhanced inhibitory effects on proliferation of various cancer cells and murine breast tumor growth than undoped counterpart. In addition, FZO-ASP injected intravenously could be effectively excreted in vivo and showed no obvious cumulative toxicity to the treated mice. Hence, this type of ultra-small iron-doped zinc oxide nanoparticles could serve as a safe and efficient sonosensitizer agent for synergistic sono-chemodynamic cancer therapy.

Synthesis of palladium nanoparticles stabilized on Schiff base-modified ZnO particles as a nanoscale catalyst for the phosphine-free Heck coupling reaction and 4-nitrophenol reduction

Recently, the development of heterogeneous nanocatalytic systems using solid supports has been gaining importance due to some advantages such as easy handling, high thermal stability, high efficiency, reusability, and so on. Therefore, the design of catalyst supports for the preparation of stable heterogeneous catalytic systems is of great importance. In this work, Schiff base-modified ZnO particles have been developed (ZnO-Scb) as a novel support. A heterogeneous nanocatalyst system has then been prepared by immobilizing palladium nanoparticles (Pd NPs) on the ZnO-Scb surface as the support. The resulting palladium nanocatalyst (Pd-ZnO-Scb) structure has been characterized by different analytical techniques (FT-IR, XRD, TEM, FE-SEM, elemental mapping and EDS) and used to catalyze the Heck coupling reactions and 4-nitrophenol (4-NP) reduction. Test results revealed that Pd-ZnO-Scb could effectively couple various aryl halides with styrene in yields of up to 98% in short reaction times. Pd-ZnO-Scb was also efficiently used in the complete 4-NP reduction within 135 s at room temperature. Additionally, it was found that Pd-ZnO-Scb was more effective than other reported catalysts in the Heck coupling reaction. Moreover, the recycling tests indicated that Pd-ZnO-Scb could be easily isolated from the reaction medium and reused in seven consecutive catalytic runs while retaining its nanostructure.

Cytotoxicity of PLGA-zinc oxide nanocomposite on human gingival fibroblasts

Background

Polylactic-co-glycolic acid and zinc oxide (PLGA-ZnO) nanocomposite has been investigated for its antibacterial properties, which could be beneficial for adding to wound dressings after periodontal surgery. However, its cytotoxicity against human gingival fibroblasts (HGFs) remains unclear and should be evaluated.

Methods

ZnO nanoparticles were synthesized using the hydrothermal method. These metallic nanoparticles were incorporated into the PLGA matrix by the solvent/non-solvent process. The nanomaterial was evaluated by field emission scanning electron microscopy (FESEM), Fourier transform infrared (FTIR), thermogravimetric analysis (TGA), and x-ray diffraction (XRD) analyses. HGF cells were acquired from the National Cell Bank and categorized into four groups: ZnO, PLGA, ZnO-PLGA, and control. The cells were exposed to different ZnO (1, 20, 40, 60, 80, and 100 µg/mL) and PLGA (0.2, 4, 8, 12, 16, and 20 µg/mL) concentrations for 24 and 48 hours. The cytotoxicity was tested using the MTT assay. The data were analyzed using SPSS 25, and P<0.05 was considered statistically significant.

Results

ZnO nanoparticles exhibited significant toxicity at≥40 µg/mL concentrations after 24 hours. Cell viability decreased significantly at all the tested concentrations after 48 hours of exposure. PLGA-ZnO cell viability in 24 hours was similar to the control group for all the concentrations up to 80 µg/mL.

Conclusion

ZnO nanoparticles could be toxic against HGF in high concentrations and with prolonged exposure. Therefore, incorporating ZnO nanoparticles into a biocompatible polymer such as PLGA could be a beneficial strategy for reducing their toxicity.

Investigating the Role of Classical Ayurveda-Based Incineration Process on the Synthesis of Zinc Oxide Based Jasada Bhasma Nanoparticles and Zn2+ Bioavailability

Jasada bhasma (JB) is a zinc oxide-based Indian traditional Ayurveda-based herbo-metallic nanoparticle used for the treatment of zinc (Zn) deficiency and autoimmune and inflammatory disorders. JB is made by following the Ayurveda-based guidelines using zinc oxide (ZnO) as a raw material and going through 17 cycles of the high-temperature incineration and trituration process known as "Ma̅raṇa" in the presence of herbal decoctions prepared from the leaves ofAzadirachta indica andAloe vera gel. These cycles improve the purity of the parent material and transform its physicochemical properties, converting it into nanoparticles. However, there still exists a knowledge gap regarding the role of incineration in the physicochemical transformation of the Zn raw material into JB nanoparticles and the biological interaction of the final product. In the present study, the JB samples obtained during different Ma̅raṇa cycles were carefully studied for their physicochemical transformation using analytical methods such as powdered X-ray diffraction (XRD), small-angle X-ray scattering (SAXS), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy, Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, and dynamic light scattering (DLS). According to the XRD results, the Zn and oxygen molecules in hexagonal ZnO wurtzite crystals gradually realigned as a result of repeated heat treatments that caused lattice tension and crystal size reduction from 53.14 to 42.40 nm. A morphological transition from 1.5 μm rod shape to 31 nm in the JB particles can be seen using FESEM and SAXS analyses. The existence of 10 nm-sized nanoparticles in the finished product was confirmed by HRTEM. The presence of ZnO was confirmed in all samples by FTIR and Raman spectroscopies. Cell viability analysis showed an inhibitory concentration 50% of >1000 μg/mL for JB nanoparticles, revealing no adverse effects in human colon Caco-2 cells. A dose-dependent uptake and intracellular accumulation of JB nanoparticles were observed in Caco-2 cells using inductively coupled plasma-based mass spectroscopy (ICP-MS). Bioavailability of Zn²⁺ ions (6% w/w) through JB dissolution in acidic pH 4.0 was observed, representing the stomach and intracellular lysosomal physiological conditions. Therefore, the study showed that the repeated incineration cycles produced biocompatible JB nanoparticles through the physicochemical transformation at molecular levels capable of delivering bioavailable Zn²⁺ ions under physiological conditions. In conclusion, the medicinal properties of JB nanoparticles described in Ayurveda were found to originate from their small size and dissolution properties, formed through the classical incineration-based synthesis process.

Synthesis of Bimetallic BiPO4/ZnO Nanocomposite: Enhanced Photocatalytic Dye Degradation and Antibacterial Applications

Multidrug-resistant strains (MDRs) are becoming a major concern in a variety of settings, including water treatment and the medical industry. Well-dispersed catalysts such as BiPO₄, ZnO nanoparticles (NPs), and different ratios of BiPO₄/ZnO nanocomposites (NCs) were synthesized through hydrothermal treatments. The morphological behavior of the prepared catalysts was characterized using XRD, Raman spectra, PL, UV-Vis diffuse reflectance spectroscopy (UV-DRS), SEM, EDX, and Fe-SEM. MDRs were isolated and identified by the 16s rDNA technique as belonging to B. flexus, B. filamentosus, P. stutzeri, and A. baumannii. The antibacterial activity against MDRs and the photocatalytic methylene blue (MB) dye degradation activity of the synthesized NPs and NCs were studied. The results demonstrate that the prepared BiPO₄/ZnO-NCs (B1Z4-75:300; NCs-4) caused a maximum growth inhibition of 20 mm against A. baumannii and a minimum growth inhibition of 12 mm against B. filamentosus at 80 μg mL^-1 concentrations of the NPs and NCs. Thus, NCs-4 might be a suitable alternative to further explore and develop as an antibacterial agent. The obtained results statistically justified the data (p ≤ 0.05) via one-way analysis of variance (ANOVA). According to the results of the antibacterial and photocatalytic study, we selected the best bimetallic NCs-4 for the photoexcited antibacterial effect of MDRs, including Gram ve⁺ and Gram ve^- strains, via UV light irradiation. The flower-like NCs-4 composites showed more effectiveness than those of BiPO₄, ZnO, and other ratios of NCs. The results encourage the development of flower-like NCs-4 to enhance the photocatalytic antibacterial technique for water purification.

SnO2 Nanoparticles: Green Synthesis, Characterization, and Water Treatment

The green synthesis approach was utilized to synthesize tin dioxide (SnO2) nanoparticles (NPs) using Ocimum Basilicum leaves extract with different concentrations (10, 15, 20 ml) and different reaction temperatures (30, 60, 90 °C). The green synthesis method is considered economical, environmentally friendly, and non-toxic. X-ray diffraction patterns of the synthesized SnO2 NPs have displayed a tetragonal crystalline structure. The crystallite size of SnO2 NPs increased from 15.12 to 17.9 nm with increasing reaction temperature while decreasing from 20.68 to 17.9 nm with increasing extract concentrations. The morphology of the synthesized SnO2 NPs was investigated using high-energy transmission electron microscopy (HR-TEM). The optical energy gap was determined using the diffuse reflectance UV–vis spectra range (300–1200) nm of SnO2 NPs at different reaction temperatures and different extract concentrations. UV/Visible Spectrophotometer was used for studying the photodegradation of methylene blue dye (MB) dye. The photocatalytic degradation of MB revealed that SnO2 NPs at reaction temperature 90 °C degraded 69% of MB solution when exposed to UV illumination for 90 min while the degradation reaches 90% for 180 min of exposure. It was obvious that the degradation rate of MB was increased with the increase of reaction temperature, and the extract concentration.

Highly Selective Colorimetric Detection of Cu2+ Using EDTA-Complexed Chlorophyll-Copper/ZnO Nanorods with Cavities Specific to Cu2+ as a Light-Activated Nanozyme

In this study, chlorophyll-copper (ChlCu)-modified ZnO nanorods (ChlCu/ZnO) were prepared, and then sodium ethylenediamine tetraacetate (EDTA) was used to remove part of Cu²⁺ in ChlCu, leaving cavities with specific adsorption activity for Cu²⁺ in E-ChlCu/ZnO. Appropriate EDTA treatment improved the photoactivity of ChlCu/ZnO and the adsorption selectivity to Cu²⁺. However, excessive EDTA treatment might lead to the collapse of the ChlCu structure, resulting in a decrease in photoactivity. The E-ChlCu/ZnO sample with 8 h of ChlCu treatment and 2 h of EDTA treatment showed optimal photoactivity. The as-prepared E-ChlCu/ZnO exhibited activity as a light-activated nanozyme, which could oxidize 3,3',5,5'-tetramethylbenzidine (TMB) to blue under illumination, but when Cu²⁺ was present in the solution, this colorimetric reaction was inhibited; therefore, E-ChlCu/ZnO could be used for colorimetric detection of Cu²⁺. Because of the existence of specific cavities, E-ChlCu/ZnO showed excellent detection selectivity, a wide linear detection range (0-1 and 1-15 μM), and a low detection limit (0.024 μM) in the colorimetric detection of Cu²⁺.

Green Facile Synthesis of Silver-Doped Zinc Oxide Nanoparticles and Evaluation of Their Effect on Drug Release

Silver doped zinc oxide nanoparticles (ZANPs) were synthesized by the gelatin mediated and polymerized sol-gel method, and a calcination temperature of 700 °C was applied for 2 h. X-ray diffraction (XRD), FESEM, TGA, DSC, and EDS were performed to study the structure of the prepared nano-powders. Both cubic silver and hexagonal ZnO diffraction peaks were detected in the XRD patterns. The XRD results, analyzed by the size strain plot (SSP) and Scherrer methods, showed that the crystalline sizes of these nanoparticles increased as the Ag concentration increased. The results were observed via transition electron microscopy (TEM), where the particle size of the prepared samples was increased in the presence of silver. Catechin was chosen as a drug model and was loaded into the hydrogels for release studies. The drug content percentage of catechin in the hydrogels showed a high loading of the drug, and the highest rate was 98.59 ± 2.11%, which was attributed to the Zn0.97Ag0.03O hydrogels. The swelling of the samples and in vitro release studies were performed. The results showed that Zn0.91Ag0.09O showed the highest swelling ratio (68 ± 3.40%) and, consequently, the highest release (84 ± 2.18%) within 300 min. The higher amount of silver ions in the hydrogel structure causes it to enhance the osmotic pressure of the inner structure and increases the relaxation of the structure chain.

Pectin Microspheres: Synthesis Methods, Properties, and Their Multidisciplinary Applications

There is great contemporary interest in using cleaner technologies through green chemistry and utilizing biopolymers as raw material. Pectin is found on plant cell walls, and it is commonly extracted from fruit shells, mostly apples or citrus fruits. Pectin has applications in many areas of commercial relevance; for this reason, it is possible to find available information about novel methods to transform pectin and pursuing enhanced features, with the structuring of biopolymer microspheres being highly cited to enhance its activity. The structuring of polymers is a technique that has been growing in recent decades, due to its potential for diverse applications in various fields of science and technology. Several techniques are used for the synthesis of microspheres, such as ionotropic gelation, extrusion, aerosol drying, or emulsions, with the latter being the most commonly used method based on its reproducibility and simplicity. The most cited applications are in drug delivery, especially for the treatment of colon diseases and digestive-tract-related issues. In the industrial field, it is used for protecting encapsulated compounds; moreover, the environmental applications mainly include the bioremediation of toxic substances. However, there are still many possibilities for expanding the use of this biopolymer in the environmental field.

Current advancements on the fabrication, modification, and industrial application of zinc oxide as photocatalyst in the removal of organic and inorganic contaminants in aquatic systems

Industrial wastewaters contain hazardous contaminants that pollute the environment and cause socioeconomic problems, thus demanding the employment of effective remediation procedures such as photocatalysis. Zinc oxide (ZnO) nanomaterials have emerged to be a promising photocatalyst for the removal of pollutants in wastewater owing to their excellent and attractive characteristics. The dynamic tunable features of ZnO allow a wide range of functionalization for enhanced photocatalytic efficiency. The current review summarizes the recent advances in the fabrication, modification, and industrial application of ZnO photocatalyst based on the analysis of the latest studies, including the following aspects: (1) overview on the properties, structures, and features of ZnO, (2) employment of dopants, heterojunction, and immobilization techniques for improved photodegradation performance, (3) applicability of suspended and immobilized photocatalytic systems, (4) application of ZnO hybrids for the removal of various types of hazardous pollutants from different wastewater sources in industries, and (5) potential of bio-inspired ZnO hybrid nanomaterials for photocatalytic applications using renewable and biodegradable resources for greener photocatalytic technologies. In addition, the knowledge gap in this field of work is also highlighted.

Decoration of Zinc Oxide Nanorods into the Surface of Activated Carbon Obtained from Agricultural Waste for Effective Removal of Methylene Blue Dye

Zinc oxide (ZnO) nanorods incorporated activated carbon (AC) composite photocatalyst was synthesized using a hydrothermal process. The AC was prepared from lapsi (Choerospondias axillaris) seed stone, an agricultural waste product, found in Nepal by the chemical activation method. An aqueous suspension of AC with ZnO precursor was subjected to the hydrothermal treatment at 140 °C for 2 h to decorate ZnO rods into the surface of AC. As-obtained ZnO nanorods decorated activated carbon (ZnO/AC) photocatalyst was characterized by various techniques, such as scanning electron microscopy (SEM), X-ray diffraction (XRD), and photoluminescence (PL) spectroscopy. Results showed that highly crystalline hexagonal ZnO nanorods were effectively grown on the surface of porous AC. The photocatalytic property of the as-prepared ZnO/AC composite was studied by degrading methylene blue (MB) dye under UV-light irradiation. The ZnO/AC composite showed better photocatalytic property than that of the pristine ZnO nanorods. The enhanced photocatalytic performance in the case of the ZnO/AC composite is attributed to the combined effects of ZnO nanorods and AC.

Zinc oxide nanoparticles: A comprehensive review on its synthesis, anticancer and drug delivery applications as well as health risks

In recent years, zinc oxide nanoparticles (ZnONPs) emerged as an excellent candidate in the field of optical, electrical, food packaging and particularly in biomedical research. ZnONPs show cancer cell specific toxicity via the pH-dependent (low pH) dissolution into Zn²⁺ ions, which generate reactive oxygen species and induce cytotoxicity in cancer cells. Further, ZnONPs have also been used as an effective carrier for the targeted delivery of several anticancer drugs into tumor cells. The increasing focus on ZnONPs resulted in the development of various synthesis approaches including chemical, pHysical, and green or biological for the manufacturing of ZnONPs. In this article, at first we have discussed the various synthesis methods of ZnONPs and secondly its biomedical applications. We have extensively reviewed the anticancer mechanism of ZnONPs on different types of cancers considering its size, shape and surface charge dependent cytotoxicity. Photoirradiation with UV light or NIR laser further increase its anticancer activity via synergistic chemo-photodynamic effect. The drug delivery applications of ZnONPs with special emphasis on drug loading mechanism, stimuli-responsive controlled release and therapeutic effects have also been discussed in this review. Finally, its side effects to vital body organs with mechanism via different exposure routes, the future direction of the ZnONPs research and application are also discussed.

Photocatalytic dye degradation and antimicrobial activities of Pure and Ag-doped ZnO using Cannabis sativa leaf extract

A facile green route has been employed for the synthesis of ZnO and Ag-doped ZnO using Cannabis sativa as a reducing and stabilizing agent. The as-synthesized nanoparticles were characterized and tested for photocatalytic dye degradation and antimicrobial activity. The results suggested that nanoparticles have shown antimicrobial activity against different human pathogenic bacteria (Escherichia coli, Klebsiella pneumonia, MRSA, Pseudomonas aeruginosa, Salmonella typhi, Staphylococcus aureus) and fungal strains (Fusarium spp. and Rosellinia necatrix). Ag-doped nanoparticles comparatively have shown better removal Congo red and methyl orange under visible light. Therefore, green synthesized nanoparticles could have beneficial applications in environmental science and biological field.

ZnO as a Functional Material, a Review

Zinc oxide (ZnO) is a fascinating wide band gap semiconductor material with many properties that make it widely studied in the material science, physics, chemistry, biochemistry, and solid-state electronics communities. Its transparency, possibility of bandgap engineering, the possibility to dope it into high electron concentrations, or with many transition or rare earth metals, as well as the many structures it can form, all explain the intensive interest and broad applications. This review aims to showcase ZnO as a very versatile material lending itself both to bottom-up and top-down fabrication, with a focus on the many devices it enables, based on epitaxial structures, thin films, thick films, and nanostructures, but also with a significant number of unresolved issues, such as the challenge of efficient p-type doping. The aim of this article is to provide a wide-ranging cross-section of the current state of ZnO structures and technologies, with the main development directions underlined, serving as an introduction, a reference, and an inspiration for future research.