Interaction of liquid epicuticular hydrocarbons and tarsal adhesive secretion in Leptinotarsa decemlineata Say (Coleoptera: Chrysomelidae)

Deciphering the variation in cuticular hydrocarbon profiles of six European honey bee subspecies

The Western honey bee (Apis mellifera) subspecies exhibit local adaptive traits that evolved in response to the different environments that characterize their native distribution ranges. An important trait is the cuticular hydrocarbon (CHC) profile, which helps to prevent desiccation and mediate communication. We compared the CHC profiles of six European subspecies (A. m. mellifera, A. m. carnica, A. m. ligustica, A. m. macedonica, A. m. iberiensis, and A. m. ruttneri) and investigated potential factors shaping their composition. We did not find evidence of adaptation of the CHC profiles of the subspecies to the climatic conditions in their distribution range. Subspecies-specific differences in CHC composition might be explained by phylogenetic constraints or genetic drift. The CHC profiles of foragers were more subspecies-specific than those of nurse bees, while the latter showed more variation in their CHC profiles, likely due to the lower desiccation stress exerted by the controlled environment inside the hive. The strongest profile differences appeared between nurse bees and foragers among all subspecies, suggesting an adaptation to social task and a role in communication. Foragers also showed an increase in the relative amount of alkanes in their profiles compared to nurses, indicating adaptation to climatic conditions.

Hydrocarbons in Formicidae: influence of chemical footprints on ant behavioral strategies

When an insect walks, it leaves chemical cues that derive from the arolium, a tarsal structure. These cues may contain important information about other species that occur in their community and can then mediate interactions of competition, predation, and information about resources with ants from their own colony. The compounds of these cues are released into the substrate in the form of chemical footprints. There are still few species studied, and little is known about the behavior of ants regarding these signals and how they use them in their interactions. Therefore, the aim of this study was to assess the behavioral strategy of different ant species when confronted with chemical footprints left by other ants, as well as identify their compounds and their relationship with the cuticular hydrocarbon profile. The experiments were performed using a Y-maze, where in one of the arms, there were chemical footprints of their own species or of other species, and the other Y arm was footprint-free. The chemical compounds of footprints and cuticle were analyzed by gas chromatography-mass spectrometry. The results show that foragers of all species detect and respond to the presence of chemical cues in the form of footprints left by other ants. Foragers of all species followed footprints of individuals of the same species both nestmates and non-nestmates; however, Neoponera villosa avoided the footprints of Cephalotes borgmeieri, and C. borgmeieri avoided the footprints of the other two species. The chemical compositions of the cuticle and footprints are related to each other and are specific to each species.

Characterization of Morphologically Distinct Components in the Tarsal Secretion of Medauroidea extradentata (Phasmatodea) Using Cryo-Scanning Electron Microscopy

Attachment to the substrate is an important phenomenon that determines the survival of many organisms. Most insects utilize wet adhesion to support attachment, which is characterized by fluids that are secreted into the interface between the tarsus and the substrates. Previous research has investigated the composition and function of tarsal secretions of different insect groups, showing that the secretions are likely viscous emulsions that contribute to attachment by generating capillary and viscous adhesion, leveling surface roughness and providing self-cleaning of the adhesive systems. Details of the structural organization of these secretions are, however, largely unknown. Here, we analyzed footprints originating from the arolium and euplantulae of the stick insect Medauroidea extradentata using cryo-scanning electron microscopy (cryo-SEM) and white light interferometry (WLI). The secretion was investigated with cryo-SEM, revealing four morphologically distinguishable components. The 3D WLI measurements of the droplet shapes and volumes over time revealed distinctly different evaporation rates for different types of droplets. Our results indicate that the subfunctionalization of the tarsal secretion is facilitated by morphologically distinct components, which are likely a result of different proportions of components within the emulsion. Understanding these components and their functions may aid in gaining insights for developing adaptive and multifunctional biomimetic adhesive systems.

Humidity stress and its consequences for male pre- and post-copulatory fitness traits in an insect

Global declines in insect abundance are of significant concern. While there is evidence that climate change is contributing to insect declines, we know little of the direct mechanisms responsible for these declines. Male fertility is compromised by increasing temperatures, and the thermal limit to fertility has been implicated as an important factor in the response of insects to climate change. However, climate change is affecting both temperature and hydric conditions, and the effects of water availability on male fertility have rarely been considered. Here we exposed male crickets Teleogryllus oceanicus to either low or high-humidity environments while holding temperature constant. We measured water loss and the expression of both pre- and postmating reproductive traits. Males exposed to a low-humidity environment lost more water than males exposed to a high-humidity environment. A male's cuticular hydrocarbon profile (CHC) did not affect the amount of water lost, and males did not adjust the composition of their CHC profiles in response to hydric conditions. Males exposed to a low-humidity environment were less likely to produce courtship song or produced songs of low quality. Their spermatophores failed to evacuate and their ejaculates contained sperm of reduced viability. The detrimental effects of low-humidity on male reproductive traits will compromise male fertility and population persistence. We argue that limits to insect fertility based on temperature alone are likely to underestimate the true effects of climate change on insect persistence and that the explicit incorporation of water regulation into our modeling will yield more accurate predictions of the effects of climate change on insect declines.

Ontogeny can provide insight into the roles of natural and sexual selection in cricket cuticular hydrocarbon evolution

The often complex cocktails of hydrocarbon compounds found on the cuticles of insects can serve both naturally and sexually selected functions, contributing to an individual's ability to withstand water loss and attract mating partners. However, whether natural and sexual selection act synergistically or antagonistically on a species' cuticular hydrocarbon (CHC) profile remains unclear. Here we examined the ontogeny of the CHC profile in a species of cricket Teleogryllus oceanicus while manipulating humidity during development. We predicted that juvenile crickets should produce only those compounds that contribute to desiccation resistance, while those compounds contributing specifically to male attractiveness should be produced only at sexual maturity. Further, if attractive CHCs come at a cost to desiccation resistance as predicted by some models of sexual selection, then males reared under low humidity should be constrained to invest less in attractive CHCs. Crickets reared under low humidity produced more long chained methyl branched alkanes, alkenes and alkadienes than did crickets reared under high humidity. The abundance of n-alkanes was unaffected by humidity treatment. Sexual dimorphism in the CHC profile was not apparent until adult emergence and became exaggerated 10 days after emergence when crickets were sexually mature. Males produced more of the same compounds that were increased in both sexes under low humidity, but the humidity treatment did not interact with sex in determining CHC abundance. The data suggest that CHC profiles which protect crickets from desiccation might have synergistic effects on male attractiveness, as there was no evidence to suggest males trade-off a CHC profile produced in response to low humidity for one associated with sexual signalling.

Cuticular hydrocarbon profiles differ between ant body parts: implications for communication and our understanding of CHC diffusion

Insect cuticular hydrocarbons (CHCs) serve as communication signals and protect against desiccation. They form complex blends of up to 150 different compounds. Due to differences in molecular packing, CHC classes differ in melting point. Communication is especially important in social insects like ants, which use CHCs to communicate within the colony and to recognize nestmates. Nestmate recognition models often assume a homogenous colony odor, where CHCs are collected, mixed, and redistributed in the postpharyngeal gland (PPG). Via diffusion, recognition cues should evenly spread over the body surface. Hence, CHC composition should be similar across body parts and in the PPG. To test this, we compared CHC composition among whole-body extracts, PPG, legs, thorax, and gaster, across 17 ant species from 3 genera. Quantitative CHC composition differed between body parts, with consistent patterns across species and CHC classes. Early-melting CHC classes were most abundant in the PPG. In contrast, whole body, gaster, thorax, and legs had increasing proportions of CHC classes with higher melting points. Intraindividual CHC variation was highest for rather solid, late-melting CHC classes, suggesting that CHCs differ in their diffusion rates across the body surface. Our results show that body parts strongly differ in CHC composition, either being rich in rather solid, late-melting, or rather liquid, early-melting CHCs. This implies that recognition cues are not homogenously present across the insect body. However, the unequal diffusion of different CHCs represents a biophysical mechanism that enables caste differences despite continuous CHC exchange among colony members.

Cuticular Hydrocarbon Trails Released by Host Larvae Lose their Kairomonal Activity for Parasitoids by Solidification

Successful host search by parasitic wasps is often mediated by host-associated chemical cues. The ectoparasitoid Holepyris sylvanidis is known to follow chemical trails released by host larvae of the confused flour beetle, Tribolium confusum, for short-range host location. Although the hexane-extractable trails consist of stable, long-chain cuticular hydrocarbons (CHCs) with low volatility, the kairomonal activity of a trail is lost two days after release. Here, we studied whether this loss of kairomonal activity is due to changes in the chemical trail composition induced by microbial activity. We chemically analyzed trails consisting of hexane extracts of T. confusum larvae after different time intervals past deposition under sterile and non-sterile conditions. GC-MS analyses revealed that the qualitative and quantitative pattern of the long-chain CHCs of larval trails did not significantly change over time, neither under non-sterile nor sterile conditions. Hence, our results show that the loss of kairomonal activity of host trails is not due to microbially induced changes of the CHC pattern of a trail. Interestingly, the kairomonal activity of trails consisting of host larval CHC extracts was recoverable after two days by applying hexane to them. After hexane evaporation, the parasitoids followed the reactivated host trails as they followed freshly laid ones. Cryo-scanning electron microscopy showed that the trails gradually formed filament-shaped microstructures within two days. This self-assemblage of CHCs was reversible by hexane application. Our study suggests that the long-chain CHCs of a host trail slowly undergo solidification by a self-assembling process, which reduces the accessibility of CHCs to the parasitoid’s receptors as such that the trail is no longer eliciting trail-following behavior.

Liquid dispensing in the adhesive hairy pads of dock beetles

Many insects can climb on smooth inverted substrates using adhesive hairy pads on their legs. The hair-surface contact is often mediated by minute volumes of liquid, which form capillary bridges in the contact zones and aid in adhesion. The liquid transport to the contact zones is poorly understood. We investigated the dynamics of liquid secretion in the dock beetle Gastrophysa viridula by quantifying the volume of the deposited liquid footprints during simulated walking experiments. The footprint volume increased with pad-surface contact time and was independent of the non-contact time. Furthermore, the footprint volume decreased to zero after reaching a threshold cumulative volume (approx. 30 fl) in successive steps. This suggests a limited reservoir with low liquid influx. We modelled our results as a fluidic resistive system and estimated the hydraulic resistance of a single attachment hair of the order of MPa · s/fl. The liquid secretion in beetle hairy pads is dominated by passive suction of the liquid during the contact phase. The high calculated resistance of the secretion pathway may originate from the nanosized channels in the hair cuticle. Such nanochannels presumably mediate the transport of cuticular lipids, which are chemically similar to the adhesive liquid.

Hierarchical architecture of spider attachment setae reconstructed from scanning nanofocus X-ray diffraction data

When sitting and walking, the feet of wandering spiders reversibly attach to many surfaces without the use of gluey secretions. Responsible for the spiders' dry adhesion are the hairy attachment pads that are built of specially shaped cuticular hairs (setae) equipped with approximately 1 µm wide and 20 nm thick plate-like contact elements (spatulae) facing the substrate. Using synchrotron-based scanning nanofocus X-ray diffraction methods, combining wide-angle X-ray diffraction/scattering and small-angle X-ray scattering, allowed substantial quantitative information to be gained about the structure and materials of these fibrous adhesive structures with 200 nm resolution. The fibre diffraction patterns showed the crystalline chitin chains oriented along the long axis of the attachment setae and increased intensity of the chitin signal dorsally within the seta shaft. The small-angle scattering signals clearly indicated an angular shift by approximately 80° of the microtrich structures that branch off the bulk hair shaft and end as the adhesive contact elements in the tip region of the seta. The results reveal the specific structural arrangement and distribution of the chitin fibres within the attachment hair's cuticle preventing material failure by tensile reinforcement and proper distribution of stresses that arise upon attachment and detachment.

A comparison of tarsal morphology and traction force in the two burying beetles Nicrophorus nepalensis and Nicrophorus vespilloides (Coleoptera, Silphidae)

Our aim was to compare friction and traction forces between two burying beetle species of the genus Nicrophorus exhibiting different attachment abilities during climbing. Specifically, the interaction of adhesive hairs and claws during attachment with respect to various surface properties was investigated by using a 2 × 3 experimental design. Traction force was measured for two different surface energies (hydrophilic vs hydrophobic) varying in roughness from smooth to micro-rough to rough. Nanotribometric tests on single legs were also performed. The external morphology of the attachment devices investigated by scanning electron microscopy suggested higher intra-specific (intersexual) than inter-specific differences. Whereas differences between the two species in traction force were high on smooth surfaces, no differences could be detected between males and females within each species. With claws intact, both species showed the highest forces on rough surfaces, although N. nepalensis with clipped claws performed best on a smooth surface. However, N. nepalensis beetles outperformed N. vespilloides, which showed no differences between smooth and rough surfaces with clipped claws. Both species demonstrated poor traction forces on micro-rough surfaces. Results concerning the impact of surface polarity were inconclusive, whereas roughness more strongly affected the attachment performance in both species. Nanotribometric analyses of the fore tarsi performed on micro-rough and rough surfaces revealed higher friction in the proximal (pull) direction compared with the distal (push) direction. In these experiments, we detected neither differences in friction performance between the two species, nor clear trends concerning the influence of surface polarity. We conclude that the investigated morphological traits are not critical for the observed interspecific difference in attachment ability on smooth surfaces. Furthermore, interspecific differences in performance are only clear on smooth surfaces and vanish on micro-rough and rough surfaces. Our results suggest that even subtle differences in the adhesion-mediating secretion in closely related species might result in qualitative performance shifts.

Communication vs. waterproofing: the physics of insect cuticular hydrocarbons

Understanding the evolution of complex traits is among the major challenges in biology. One such trait is the cuticular hydrocarbon (CHC) layer in insects. It protects against desiccation and provides communication signals, especially in social insects. CHC composition is highly diverse within and across species. To understand the adaptive value of this chemical diversity, we must understand how it affects biological functionality. So far, CHCs received ample research attention, but their physical properties were little studied. We argue that these properties determine their biological functionality, and are vital to understand how CHC composition affects their adaptive value. We investigated melting behaviour and viscosity of CHCs from eleven ant species using differential scanning calorimetry and a novel microrheological technique.

Cuticular hydrocarbons began melting below -45°C, and often were entirely liquid only above 30°C. Thus, they formed a solid-liquid mixture at ambient conditions, which contrasts to previous assumptions of entirely solid layers in many species. This may be adaptive since only biphasic CHC layers ensure uniform coating of the insect body, which is necessary for waterproofing. CHC viscosity was mostly between 0.1 and 0.2 Pa.s, thus similar to motor oils. Surprisingly, chemically different CHC profiles had similar viscosities, suggesting that a certain viscosity level is adaptive and ensures that communication signals can be perceived.

With this study, we draw attention to the importance of studying the physics of CHC layers. Only by understanding how chemical and physical mechanisms enable CHC functionality can we understand the causes and consequences of CHC diversification.

Liquid secretion and setal compliance: the beetle's winning combination for a robust and reversible adhesion

This paper is a brief review and discussion of the recent literature on the hairy adhesive pads of beetles, with the focus on two features of these pads, firstly, compliant setal tips and secondly, a liquid secretion, that together guarantee robust cycles of attachment/detachment on smooth and rough substrates. The compliance is required to ensure sufficient contact between the setal tips and the substrate with a minimum of elastically stored energy at the contact interface. The secretion fills potential gaps between both surfaces, generates capillary adhesive forces, and enhances self-cleaning of these microstructures. Furthermore, the secretion might prevent setal dehydration and subsequently maintain setal tip compliancy. The paper also pinpoints a series of open questions on the physical mechanisms at play to passively regulate the contact forces developed by these hairy pads during locomotion.

Coping with the climate: cuticular hydrocarbon acclimation of ants under constant and fluctuating conditions

Terrestrial arthropods achieve waterproofing by a layer of cuticular hydrocarbons (CHCs). At the same time, CHCs also serve as communication signals. To maintain waterproofing under different climate conditions, insects adjust the chemical composition of their CHC layer, but this may affect the communication via CHCs. The detailed acclimatory changes of CHCs and how these influence their physical properties are still unknown. Here, we studied acclimation in two closely related ant species with distinct CHC profiles, Myrmica rubra and Myrmica ruginodis, in response to constant or fluctuating temperature and humidity regimes. We measured how acclimation affected CHC composition and viscosity, and the ants' drought survival. In both species, CHC composition showed strong, predictable responses to temperature regimes. Warm-acclimated individuals had higher proportions of linear alkanes, and less methyl-branched or unsaturated CHCs. These changes coincided with higher solid content and viscosity of CHCs in warm-acclimated ants. Temperature fluctuation caused effects similar to those observed under constant-cool conditions in Mrubra, but led to entirely different profiles in Mruginodis, suggesting that fluctuating and constant conditions pose very different challenges. Acclimation to dry conditions led to higher absolute amounts of CHCs, which increased the ants' drought survival, whereas temperature acclimation did not. Hence, the temperature-induced CHC changes cannot be explained by the need for waterproofing alone. Although these changes could be non-adaptive, we propose that they serve to maintain a constant CHC viscosity, which may be essential for communication and other functions.

Ordered Topographically Patterned Silicon by Insect-Inspired Capillary Submicron Stamping

Insect-inspired capillary submicron stamping and subsequent surface-limited metal-assisted chemical etching (MACE) with ammonium bifluoride as a HF source are employed for the high-throughput production of ordered topographically patterned silicon (tpSi). Insect feet often possess hairy contact elements through which adhesive secretion is deployed. Thus, arrays of adhesive secretion drops remain as footprints on contact surfaces. Stamps for insect-inspired capillary submicron stamping having surfaces topographically patterned with contact elements mimic the functional principles of such insect feet. They contain spongy continuous nanopore networks penetrating the entire stamps. Any ink (organic or aqueous) may be supplied from the backside of the nanoporous stamps to the contact elements. We generated ordered arrays of submicron AgNO₃ dots extending square millimeters on Si by manual stamping with cycle times of a few seconds under ambient conditions; at higher load, ordered holey AgNO₃ films were obtained. Surface-limited MACE correspondingly yielded either macroporous tpSi or Si pillar arrays. Inkjet printing of polymer solutions onto the tpSi yielded patterns of polymer blots conformally covering the tpSi. Such blot patterns could potentially represent a starting point for the development of persistent and scratch-resistant identity labels or quick response codes on silicon surfaces.

How do cuticular hydrocarbons evolve? Physiological constraints and climatic and biotic selection pressures act on a complex functional trait

Cuticular hydrocarbons (CHCs) cover the cuticles of virtually all insects, serving as a waterproofing agent and as a communication signal. The causes for the high CHC variation between species, and the factors influencing CHC profiles, are scarcely understood. Here, we compare CHC profiles of ant species from seven biogeographic regions, searching for physiological constraints and for climatic and biotic selection pressures. Molecule length constrained CHC composition: long-chain profiles contained fewer linear alkanes, but more hydrocarbons with disruptive features in the molecule. This is probably owing to selection on the physiology to build a semi-fluid cuticular layer, which is necessary for waterproofing and communication. CHC composition also depended on the precipitation in the ants' habitats. Species from wet climates had more alkenes and fewer dimethyl alkanes than those from drier habitats, which can be explained by different waterproofing capacities of these compounds. By contrast, temperature did not affect CHC composition. Mutualistically associated (parabiotic) species possessed profiles highly distinct from non-associated species. Our study is, to our knowledge, the first to show systematic impacts of physiological, climatic and biotic factors on quantitative CHC composition across a global, multi-species dataset. We demonstrate how they jointly shape CHC profiles, and advance our understanding of the evolution of this complex functional trait in insects.

The influence of slavemaking lifestyle, caste and sex on chemical profiles in Temnothorax ants: insights into the evolution of cuticular hydrocarbons

Chemical communication is central for the formation and maintenance of insect societies. Generally, social insects only allow nest-mates into their colony, which are recognized by their cuticular hydrocarbons (CHCs). Social parasites, which exploit insect societies, are selected to circumvent host recognition. Here, we studied whether chemical strategies to reduce recognition evolved convergently in slavemaking ants, and whether they extend to workers, queens and males alike. We studied CHCs of three social parasites and their related hosts to investigate whether the parasitic lifestyle selects for specific chemical traits that reduce host recognition. Slavemaker profiles were characterized by shorter-chained hydrocarbons and a shift from methyl-branched alkanes to n-alkanes, presumably to reduce recognition cue quantity. These shifts were consistent across independent origins of slavery and were found in isolated ants and those emerging in their mother colony. Lifestyle influenced profiles of workers most profoundly, with little effect on virgin queen profiles. We detected an across-species caste signal, with workers, for which nest-mate recognition is particularly important, carrying more and longer-chained hydrocarbons and males exhibiting a larger fraction of n-alkanes. This comprehensive study of CHCs across castes and species reveals how lifestyle-specific selection can result in convergent evolution of chemical phenotypes.

Adhesive performance of tropical arboreal ants varies with substrate temperature

The surface temperature of tree branches in the tropical rainforest canopy can reach up to 55°C. Ants and other small cursorial organisms must maintain adequate attachment in this extreme microenvironment to forage effectively and avoid falling. Ant adhesion depends on liquid secretions that should become less viscous at high temperatures, causing ants to slip. However, tropical arboreal ants have high thermal tolerance and actively forage on hot canopy surfaces, suggesting that these ants can maintain adhesion on hot substrates. We measured tarsal pad shear adhesion of 580 workers (representing 11 species and four subfamilies) of tropical arboreal ants at temperatures spanning the range observed in the field (23-55°C). Adhesive performance among species showed three general trends: (1) a linear decrease with increasing temperature, (2) a non-linear relationship with peak adhesive performance at ca. 30-40°C, and (3) no relationship with temperature. The mechanism responsible for these large interspecific differences remains to be determined, but likely reflects variation in the composition of the secreted adhesive fluid. Understanding such differences will reveal the diverse ways that ants cope with highly variable, and often unpredictable, thermal conditions in the forest canopy.

Show me your tenent setae and I tell you who you are - Telling the story of a neglected character complex with phylogenetic signals using Leiodidae (Coleoptera) as a case study

The tarsal setae in 97 species of Leiodidae and eight outgroups were examined using SEM imaging and dissections. Modified adhesive setae present in males are referred to as "male tenent setae" (MTS). In most cases, dilated tarsomeres were associated with MTS, which were always present on the protarsi and sometimes the mesotarsi. MTS are reported for the first time on the mesotarsi of Leptodirini and on the metatarsi in two genera of Sogdini. Contrary to reports in the literature, the reduction in the number of the MTS bearing mesotarsomeres is considered a derived condition. Both sexes of Leptinus (Platypsyllinae) have modified setae (referred to as tenent setae in the literature), probably related to their specialised association with mammals, and a patch of MTS was recognized for the first time among those modified setae among males. Four main types of MTS are recognised: (1) a plesiomorphic discoidal type that has a shaft with a round cross-section and maintains a similar diameter throughout its length until forming the expanded discoidal terminal plate; (2) a minidiscoidal type, similar to discoidal but with a relatively small terminal plate, found in Cholevinae; (3) a conical type, present in Leiodinae (excluding Estadiini) where the shaft increases in diameter until forming the terminal plate; and (4) a spatulate type, where an even wider terminal plate has a lateral projection, derived from the conical form and synapomorphic for the leiodine tribes Pseudoliodini, Scotocryptini, and possibly Agathidiini.

Structural and tribometric characterization of biomimetically inspired synthetic "insect adhesives"

Background: Based on previous chemical analyses of insect tarsal adhesives, we prepared 12 heterogeneous synthetic emulsions mimicking the polar/non-polar principle, analysed their microscopical structure and tested their adhesive, frictional, and rheological properties. Results: The prepared emulsions varied in their consistency from solid rubber-like, over soft elastic, to fluid (watery or oily). With droplet sizes >100 nm, all the emulsions belonged to the common type of macroemulsions. The emulsions of the first generation generally showed broader droplet-size ranges compared with the second generation, especially when less defined components such as petrolatum or waxes were present in the lipophilic fraction of the first generation of emulsions. Some of the prepared emulsions showed a yield point and were Bingham fluids. Tribometric adhesion was tested via probe tack tests. Compared with the "second generation" (containing less viscous components), the "first generation" emulsions were much more adhesive (31-93 mN), a finding attributable to their highly viscous components, i.e., wax, petrolatum, gelatin and poly(vinyl alcohol). In the second generation emulsions, we attained much lower adhesivenesses, ranging between 1-18 mN. The adhesive performance was drastically reduced in the emulsions that contained albumin as the protein component or that lacked protein. Tribometric shear tests were performed at moderate normal loads. Our measured friction forces (4-93 mN in the first and 0.1-5.8 mN in the second generation emulsions) were comparatively low. Differences in shear performance were related to the chemical composition and emulsion structure. Conclusion: By varying their chemical composition, synthetic heterogeneous adhesive emulsions can be adjusted to have diverse consistencies and are able to mimic certain rheological and tribological properties of natural tarsal insect adhesives.

Insect Adhesion Secretions: Similarities and Dissimilarities in Hydrocarbon Profiles of Tarsi and Corresponding Tibiae

Spatially controlled in vivo sampling by contact solid phase microextraction with a non-coated silica fiber combined with gas chromatography-mass spectrometry (GC-MS) was utilized for hydrocarbon profiling in tarsal adhesion secretions of four insect species (Nicrophorus vespilloides, Nicrophorus nepalensis, Sagra femorata, and Gromphadorhina portentosa) by using distinct adhesion systems, viz. hairy or smooth tarsi. For comparison, corresponding samples from tibiae, representing the general cuticular hydrocarbon profile, were analyzed to enable the statistical inference of active molecular adhesion principles in tarsal secretions possibly contributed by specific hydrocarbons. n-Alkanes, monomethyl and dimethyl alkanes, alkenes, alkadienes, and one aldehyde were detected. Multivariate statistical analysis (principal component and orthogonal partial least square discriminant analyses) gave insights into distinctive molecular features among the various insect species and between tarsus and tibia samples. In general, corresponding hydrocarbon profiles in tarsus and tibia samples largely resembled each other, both qualitatively and in relative abundances as well. However, several specific hydrocarbons showed significantly different relative abundances between corresponding tarsus and tibia samples, thus indicating that such differences of specific hydrocarbons in the complex mixtures might constitute a delicate mechanism for fine-tuning the reversible attachment performances in tarsal adhesive fluids that are composed of substances originating from the same pool as cuticular hydrocarbons. Caused by melting point depression, the multicomponent tarsal adhesion secretion, made up of straight chain alkanes, methyl alkanes, and alkenes will have a semi-solid, grease-like consistency, which might provide the basis for a good reversible attachment performance.

Plant surfaces with cuticular folds and their replicas: influence of microstructuring and surface chemistry on the attachment of a leaf beetle

Plant surfaces covered either with epicuticular wax crystals or cuticular folds have been shown to strongly reduce the ability of insects to attach to them. However, the relative impact of surface structuring vs. surface chemistry on insect attachment remains unclear. To understand the mechanisms reducing adhesion of insects on plant surfaces in more detail, we performed traction experiments (i) on plant surfaces covered with cuticular folds of different dimensions, and on their (ii) untreated and (iii) hydrophobized replicas. As a reference, measurements were performed on replicas of smooth plant surfaces and of glass. Traction forces were measured with a highly sensitive force transducer, using tethered male Colorado potato beetles (Leptinotarsa decemlineata) as a model insect species. Contact angle measurements with water and diiodomethane were also performed to examine the physicochemical properties of the test surfaces. We found that surface structuring has a strong influence on the magnitude of the attachment force. In contrast, under the chosen experimental conditions, surface chemistry had no significant influence. Our results indicate that attachment of the beetles is reduced solely by the dimensions of the folds, with cuticular folds of about 0.5 μm in both height and width being the most effective. Contrary to the attachment of beetles, the wettability of the surfaces was considerably influenced by both surface structuring and chemistry. These results contribute to a better understanding of plant-insect interactions and the function of microstructured surfaces, and may facilitate the development of biomimetic anti-adhesive surfaces.

Mating behavior of Diabrotica speciosa (Coleoptera: Chrysomelidae)

Diabrotica speciosa (Germar) is an economically important pest of Neotropical cultures and represents a quarantine risk for Neartic and Paleartic Regions. Despite its agricultural importance, few studies have been done on mating behavior and chemical communication, which has delayed the development of behavioral techniques for population management, such as the use of pheromone traps. In this study, we determined 1) the age at first mating; 2) diel rhythm of matings; 3) number of matings over 7 d; 4) the sequence of D. speciosa activities during premating, mating, and postmating; 5) the duration of each activity; and 6) response to male and female conspecific volatiles in Y-tube olfactometer. The first mating occurred between the third and seventh day after adult emergence and the majority of pairs mated on the fourth day after emergence. Pairs of D. speciosa showed a daily rhythm of mating with greater sexual activity between the end of the photophase and the first half of the scotophase. During the 7 d of observation, most pairs mated only once, although 30% mated two, three, or four times. In a Y-tube olfactometer, males were attracted by virgin females as well as by the volatile compounds emitted by females. Neither males nor their volatiles were attractive to either sex. Our observation provide information about mating behavior of D. speciosa, which will be useful in future research in chemical communication, such as identification of the pheromone and development of management techniques for this species using pheromone traps.

The influence of surface energy on the self-cleaning of insect adhesive devices

The ability of insects to adhere to surfaces is facilitated by the use of adhesive organs found on the terminal leg segments. These adhesive pads are inherently ‘tacky’ and are expected to be subject to contamination by particulates, leading to loss of function. Here, we investigated the self-cleaning of ants and beetles by comparing the abilities of both hairy and smooth pad forms to self-clean on both high and low energy surfaces after being fouled with microspheres of two sizes and surface energies. We focused on the time taken to regain adhesive potential in unrestrained Hymenopterans (Polyrhachis dives and Myrmica scabrinodis) and Coccinellids (Harmonia axyridis and Adalia bipunctata) fouled with microspheres. We found that the reattainment of adhesion is influenced by particle type and size in Hymenopterans, with an interaction between the surface energy of the contaminating particle and substrate. In Coccinellids, reattainment of adhesion was only influenced by particle size and substrate properties. The adhesive organs of Coccinellids appear to possess superior self-cleaning abilities compared with those of Hymenopterans, although Hymenopterans exhibit better adhesion to both surface types.

Arachnids secrete a fluid over their adhesive pads

Background

Many arachnids possess adhesive pads on their feet that help them climb smooth surfaces and capture prey. Spider and gecko adhesives have converged on a branched, hairy structure, which theoretically allows them to adhere solely by dry (solid-solid) intermolecular interactions. Indeed, the consensus in the literature is that spiders and their smooth-padded relatives, the solifugids, adhere without the aid of a secretion.

Methodology and Principal Findings

We investigated the adhesive contact zone of living spiders, solifugids and mites using interference reflection microscopy, which allows the detection of thin liquid films. Like insects, all the arachnids we studied left behind hydrophobic fluid footprints on glass (mean refractive index: 1.48–1.50; contact angle: 3.7–11.2°). Fluid was not always secreted continuously, suggesting that pads can function in both wet and dry modes. We measured the attachment forces of single adhesive setae from tarantulas (Grammostola rosea) by attaching them to a bending beam with a known spring constant and filming the resulting deflection. Individual spider setae showed a lower static friction at rest (26%±2.8 SE of the peak friction) than single gecko setae (Thecadactylus rapicauda; 96%±1.7 SE). This may be explained by the fact that spider setae continued to release fluid after isolation from the animal, lubricating the contact zone.

Significance

This finding implies that tarsal secretions occur within all major groups of terrestrial arthropods with adhesive pads. The presence of liquid in an adhesive contact zone has important consequences for attachment performance, improving adhesion to rough surfaces and introducing rate-dependent effects. Our results leave geckos and anoles as the only known representatives of truly dry adhesive pads in nature. Engineers seeking biological inspiration for synthetic adhesives should consider whether model species with fluid secretions are appropriate to their design goals.