Biocompatible oil core nanocapsules as potential co-carriers of paclitaxel and fluorescent markers: preparation, characterization, and bioimaging

Chitosan-based nanocapsules by emulsification containing PUFA concentrates from tuna oil

Chitosan nanocapsules containing polyunsaturated fatty acid (PUFA) concentrates from tuna oil, with EPA + DHA contents around 57% (w/w), were developed by emulsification process, using different chitosan concentration (1.0%, 1.5%, 2.0%, w/v) and stirring speed (10,000, 15,000, 20,000 rpm). The effects of these parameters on particle size and zeta potential were evaluated. The physical and oxidative stabilities were used to measure the product quality during storage. Chitosan concentration, stirring speed and its interaction significantly affected (p < 0.05) the particle size. In addition, chitosan concentration significantly affected (p < 0.05) the zeta potential of nanocapsules emulsion. Based on the results of physical and oxidative stabilities, the nanocapsules were stable for 30 days under refrigeration temperature (7 °C), and with 1.5-2% chitosan resulted in improved protection against oil oxidation. The nanocapsules produced with 2% chitosan and 10,000 rpm showed the lowest variations of polydispersity index and nanocapsules size after 30 days of storage (221.8 ± 3.0 nm). These conditions can be considered the most suitable to produce nanocapsules of PUFA concentrates from tuna oil using chitosan as wall material. These nanocapsules showed physical characteristics and oxidative stability, which could enable their application in the food industry, representing an important source of EPA and DHA fatty acids.

PEGylated and functionalized polylactide-based nanocapsules: An overview

Polymeric nanocapsules (NC) are versatile mixed vesicular nanocarriers, generally containing a lipid core with a polymeric wall. They have been first developed over four decades ago with outstanding applicability in the cosmetic and pharmaceutical fields. Biodegradable polyesters are frequently used in nanocapsule preparation and among them, polylactic acid (PLA) derivatives and copolymers, such as PLGA and amphiphilic block copolymers, are widely used and considered safe for different administration routes. PLA functionalization strategies have been developed to obtain more versatile polymers and to allow the conjugation with bioactive ligands for cell-targeted NC. This review intends to provide steps in the evolution of NC since its first report and the recent literature on PLA-based NC applications. PLA-based polymer synthesis and surface modifications are included, as well as the use of NC as a novel tool for combined treatment, diagnostics, and imaging in one delivery system. Furthermore, the use of NC to carry therapeutic and/or imaging agents for different diseases, mainly cancer, inflammation, and infections is presented and reviewed. Constraints that impair translation to the clinic are discussed to provide safe and reproducible PLA-based nanocapsules on the market. We reviewed the entire period in the literature where the term "nanocapsules" appears for the first time until the present day, selecting original scientific publications and the most relevant patent literature related to PLA-based NC. We presented to readers a historical overview of these Sui generis nanostructures.

QbD Assisted Development of Lipidic Nanocapsules for Antiestrogenic Activity of Exemestane in Breast Cancer

Some breast cancers are caused by hormonal imbalances, such as estrogen and progesterone.These hormones play a function in directing the growth of cancer cells. The hormone receptors in hormone receptor-positive breast cancer lead breast cells to proliferate out of control. Cancer therapy such as hormonal, targeted, radiation is still unsatisfactory because of these challenges viz. MDR (Multiple drug resistance), off-targeting, severe adverse effects. A novel aromatase inhibitor exemestane (Exe) exhibits promising therapy in breast cancer. This study aims to develop and optimize Exe-loaded lipid nanocapsules (LNCs) by using DSPC, PF68 and olive oil as lipid, surfactant and oil phase, respectively and to characterize the same. The prepared nanocapsules were investigated via in-vitro cell culture and in-vivo animal models. The LNCs exhibited cytotoxicity in MCF-7 cell lines and enhanced anti-cancer activity and reduced cardiotoxicity in DMBA-induced animal model when compared to the drug. Additionally, in-vivo pharmacokinetics revealed a 4.2-fold increased oral bioavailability when compared with Exe suspension. This study demonstrated that oral administration of Exe-loaded LNCs holds promise for the antiestrogenic activity of exemestane in breast cancer.

Polymeric Nanocapsules Containing Fennel Essential Oil: Their Preparation, Physicochemical Characterization, Stability over Time and in Simulated Gastrointestinal Conditions

Plant essential oils, a source of biologically active compounds, represent a promising segment in the pharmaceutical market. However, their volatility, hydrophobicity, poor stability, and low toxicity limit direct use in pharmaceutical-related applications. Nanoencapsulation is a technique that allows overcoming these obstacles by improving bioaccessibility and bioavailability. Nanocapsules (NCs) based on biodegradable and biocompatible poly(ɛ-caprolactone) containing Foeniculum vulgare Mill. essential oil (FEO), known for its biological activities, were successfully prepared by interfacial deposition of the preformed polymer method. The composition of FEO (trans-anethole chemotype) was determined by gas chromatography analyses. The FEO presence inside the NCs was confirmed by nuclear magnetic resonance experiments. The FEO-NCs showed nanometer size (210 nm), low polydispersity index (0.10), negative zeta potential (−15 mV), non-Newtonian rheological behavior, and high efficiency of encapsulation (93%). Moreover, parameters such as FEO-NC particle size, bioactive compound retention, and FEO composition were monitored for 30 days at storage temperatures of 4 and 40 °C, confirming the robustness of the nanosystem. Finally, FEO-NCs were resistant to the simulated gastric digestion and showed an effective bioaccessibility of 29% in simulated intestinal digestion. Based on the results obtained, this FEO-NC nanosystem could find interesting applications in the nutraceutical and pharmaceutical sectors.

Synthesis and Characterization of Pyrazole-Enriched Cationic Nanoparticles as New Promising Antibacterial Agent by Mutual Cooperation

A pyrazole derivative (CB1) was previously evaluated in vivo for various pharmacological activities (with the exception of antimicrobial effects), using DMSO as the administrative medium, mainly due to its water insolubility. Considering the global necessity for new antimicrobial agents, CB1 attracted our attention as a candidate to meet this need, mainly because the secondary amine group in its structure would make it possible to obtain its hydrochloride salt (CB1H), thus effortlessly solving its water-solubility drawbacks. In preliminary microbiologic investigations on Gram-negative and Gram-positive bacteria, CB1H displayed weak antibacterial effects on MDR isolates of Gram-positive species, nonetheless better than those displayed by the commonly-used available antibiotics. Therefore, aiming at improving such activity and extending the antibacterial spectrum of CB1H to Gram-negative pathogens, in this first work CB1 was strategically formulated in nanoparticles using a cationic copolymer (P7) previously developed by us, possessing potent broad-spectrum bactericidal activity. Using the nanoprecipitation method, CB1H-loaded polymer nanoparticles (CB1H-P7 NPs) were obtained, which were analyzed by attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy to confirm the successful loading. Additionally, CB1H-P7 NPs were fully characterized in terms of morphology, size, polydispersity indices, surface charge, DL%, and EE%, as well as release and potentiometric profiles.

Recent advances in polymer shell oily-core nanocapsules for drug-delivery applications

Polymeric nanocapsules are vesicular drug-delivery systems composed of an inner oily reservoir surrounded by polymeric membranes. Nanocapsules have various advantages over other nanovesicular systems such as providing controlled drug release properties. We discuss the recent advances in polymeric shell oily-core nanocapsules, illustrating the different types of polymers used and their implementation. Nanocapsules can be utilized for many purposes, especially encapsulation of highly lipophilic drugs. They have been shown to have variable applications, especially in cancer therapy, due to the ability of the polymeric shell to direct the loaded drugs to their target sites, as well as their high internalization efficacy. Those productive applications guaranteed their high potential as drug-delivery systems. However, their clinical development is still in an early stage.

A Combined Antitumor Strategy Mediated by a New Targeted Nanosystem to Hepatocellular Carcinoma

BACKGROUND

Hepatocellular carcinoma (HCC) is one of the main causes of cancer-related death. Sorafenib, which is the first-line therapy for this disease, is associated with reduced therapeutic efficacy that could potentially be overcome by combination with selumetinib. In this context, the main goal of this work was to develop a new nanosystem, composed of a polymeric core coated by a lipid bilayer containing the targeting ligand GalNAc, to specifically and efficiently co-deliver both drugs into HCC cells, in order to significantly increase their therapeutic efficacy.

METHODS

The physicochemical characterization of hybrid nanosystems (HNP) and their components was performed by dynamic light scattering, zeta potential, matrix-assisted laser desorption ionization - time of flight mass spectroscopy, and transmission electron microscopy. Cellular binding, uptake and specificity of HNP were evaluated through flow cytometry and confocal microscopy. The therapeutic activity was evaluated namely through: cell viability by the Alamar Blue assay; cell death by flow cytometry using FITC-Annexin V; caspases activity by luminescence; mitochondrial membrane potential by flow cytometry; and molecular target levels by Western blot.

RESULTS

The obtained data show that these hybrid nanosystems present high stability and loading capacity of both drugs, and suitable physicochemical properties, namely in terms of size and surface charge. Moreover, the generated formulation allows to circumvent drug resistance and presents high specificity, promoting great cell death levels in HCC cells, but not in non-tumor cells. This potentiation of the antitumor effect of co-loaded drugs was carried out by an increased programmed cell death, being associated with a strong reduction in the mitochondrial membrane potential, a significant increase in the activity of caspases 3/7 and caspase 9, and much greater number of annexin V-positive cells.

CONCLUSION

The developed formulation resulted in a high and synergistic antitumor effect, revealing a translational potential to improve therapeutic approaches against HCC.

Plant oils: From chemical composition to encapsulated form use

The last decade has witnessed a burgeoning global movement towards essential and vegetable oils in the food, agriculture, pharmaceutical, cosmetic, and textile industries thanks to their natural and safe status, broad acceptance by consumers, and versatile functional properties. However, efforts to develop new therapy or functional agents based on plant oils have met with challenges of limited stability and/or reduced efficacy. As a result, there has been increased research interest in the encapsulation of plant oils, whereby the nanocarriers serve as barrier between plant oils and the environment and control oil release leading to improved efficacy, reduced toxicity and enhanced patient compliance and convenience. In this review, special concern has been addressed to the encapsulation of essential and vegetable oils in three types of nanocarriers: polymeric nanoparticles, liposomes and solid lipid nanoparticles. First, the chemical composition of essential and vegetable oils was handled. Moreover, we gather together the research findings reported by the literature regarding the different techniques used to generate these nanocarriers with their significant findings. Finally, differences and similarities between these nanocarriers are discussed, along with current and future applications that are warranted by their structures and properties.

Targeted Nanoparticles Harboring Jasmine-Oil-Entrapped Paclitaxel for Elimination of Lung Cancer Cells

Selectively targeted drug delivery systems are preferable chemotherapeutic platforms, as they specifically deliver the drug cargo into tumor cells, while minimizing untoward toxic effects. However, these delivery systems suffer from insufficient encapsulation efficiency (EE), encapsulation capacity (EC), and premature drug release. Herein, we coencapsulated paclitaxel (PTX) and Jasmine oil (JO) within PEG-PCL nanoparticles (NPs), with an average diameter < 50 nm, selectively targeted to non-small cell lung cancer (NSCLC) cells, via S15-aptamer (APT) decoration. JO was selected as an "adhesive" oily core to enhance PTX entrapment, as JO and PTX share similar hydrophobicity and terpenoid structure. JO markedly enhanced EE of PTX from 23% to 87.8% and EC from 35 ± 6 to 74 ± 8 µg PTX/mg PEG-PCL. JO also markedly increased the residual amount of PTX after 69 h, from 18.3% to 65%. Moreover, PTX cytotoxicity against human NSCLC A549 cells was significantly enhanced due to the co-encapsulation with JO; the IC50 value for PTX encapsulated within JO-containing APT-NPs was 20-fold lower than that for APT-NPs lacking JO. Remarkably, JO-containing APT-NPs displayed a 6-fold more potent cell-killing, relatively to the free-drug. Collectively, these findings reveal a marked synergistic contribution of JO to the cytotoxic activity of APT-NP-based systems, for targeted PTX delivery against NSCLC, which may be readily applied to various hydrophobic chemotherapeutics.

A selective drug delivery system based on phospholipid-type nanobubbles for lung cancer therapy

Aim: To develop a micelle-type nanobubble decorated with fluorescein-5-isothiocyanate-conjugated transferrin, with encapsulation of paclitaxel (PTX@FT-NB) for lung cancer treatment. Materials & methods: PTX@FT-NBs were characterized to determine their physicochemical properties, structural stability and cytotoxicity. Lung cancer cell and mouse xenograft tumor models were used to evaluate the therapeutic effectiveness of PTX@FT-NB. Results: The PTX@FT-NBs not only showed selective targeting to lung cancer cells but also inhibited tumor growth significantly via paclitaxel release. Furthermore, paclitaxel-induced microtubule stabilization demonstrated the release of the drug from PTX@FT-NB in the targeted tumor cell both in vitro and in vivo. Conclusion: PTX@FT-NB has the potential as an anticancer nanocarrier against lung cancer cells because of its specific targeting and better drug delivery capacity.

Polymer Capsules with Hydrophobic Liquid Cores as Functional Nanocarriers

Recent developments in the fabrication of core-shell polymer nanocapsules, as well as their current and future applications, are reported here. Special attention is paid to the newly introduced surfactant-free fabrication method of aqueous dispersions of nanocapsules with hydrophobic liquid cores stabilized by amphiphilic copolymers. Various approaches to the efficient stabilization of such vehicles, tailoring their cores and shells for the fabrication of multifunctional, navigable nanocarriers and/or nanoreactors useful in various fields, are discussed. The emphasis is placed on biomedical applications of polymer nanocapsules, including the delivery of poorly soluble active compounds and contrast agents, as well as their use as theranostic platforms. Other methods of fabrication of polymer-based nanocapsules are briefly presented and compared in the context of their biomedical applications.

Nanoencapsulation of sophorolipids in PEGylated poly(lactide-co-glycolide) as a novel approach to target colon carcinoma in the murine model

Poly(lactic-co-glycolic acid) nanocapsules containing amphiphilic biosurfactant sophorolipids were formulated using a dispersion-based procedure. Di-block copolymers were used to vary peripheral poly(ethylene glycol) density, and variation in the oil core was used to achieve efficient encapsulation of the sophorolipid payload. Particulate size, zeta potential, encapsulation efficiency, release and stability were characterised. A glyceryl monocaprate core composition had the lowest particulate size, maximum encapsulation efficiency and optimum shelf-life stability compared to other formulations. This core composition was used to deliver sophorolipid to both in vitro and in vivo model tumour cell lines (CT26 murine colon carcinoma) and the effect of peripheral hydrophilicity was evaluated. Formulations with 10% poly(ethylene glycol) density achieved more than 80% reduction in cancer cell viability after 72 h and enhanced cellular uptake in CT26 cells. These formulations exhibited higher tumour accumulation and a longer blood circulation profile when compared to the non-poly(ethylene glycol)-containing nanocapsules. Animals treated with sophorolipid-loaded nanocapsules showed a tumour growth inhibition of 57% when compared to controls. An assessment of tumour mass within the same study cohort showed the biggest reduction when compared control and free drug-treated cohorts. This study shows that hydrophilic poly(lactic-co-glycolic acid) nanocapsules loaded with sophorolipids can address the poor intracellular delivery associated with these biosurfactants and is a promising approach for the treatment of colon neoplasia.

Preparation of Biodegradable Polymeric Nanocapsules for Treatment of Malignant Tumor Using Coaxial Capillary Microfluidic Device

Objective: Nanocapsules play a role in the targeted delivery of chemotherapy drugs. However, the traditional technology for preparation of nanocapsules is relatively complex with poor controllability, leading to large differences batch to batch. This study aimed to evaluate the quality of drugs-loaded nanocapsules (Drugs-NCs) fabricated by coaxial capillary microfluidic device, and inhibitory effect on malignant tumors. Materials and Methods: In this study, oxaliplatin, irinotecan, and 5-fluorouracil were selected as chemotherapy drugs, and Drugs-NCs were prepared by coaxial glass capillary microfluidic device. Next, transmission electron microscope was utilized to characterize surface morphology and particle size distribution of Drugs-NCs. Then, high performance liquid chromatography was used to determine the drug loading and encapsulation efficiency. Dialysis method was performed to measure the drug release of Drugs-NCs in vitro. To study the effects of Drugs + NCs on tumor growth in vivo, BALB/c (nu/nu) nude mice were used in vivo experiments. Results: The Drugs-NCs were spherical and uniform in size (103.4 nm). Besides, the encapsulation efficiencies of oxaliplatin, irinotecan, and 5-fluorouracil were 97.0%, 95.7%, and 15.6%, respectively. Moreover, drugs encapsulated in the nanocapsules released less and was pH-dependent, with more rapid release being observed at pH 5.5 group compared with pH 7.4 group. MTT assay and in vivo experiments indicated the inhibitory effect of Drugs-NCs on malignant tumors. Conclusion: The prepared nanocapsules had potential tumor targeting. Furthermore, coaxial capillary microfluidic device could be used as a promising microfluidic technology to fabricate multiple Drug-NCs.

Design, Formulation and in vivo Evaluation of Novel Honokiol-Loaded PEGylated PLGA Nanocapsules for Treatment of Breast Cancer

Background

Honokiol (HK) is a common herbal medicine extracted from magnolia plants. Low aqueous solubility and limited bioavailability of HK have hindered its clinical application, especially for cancer treatment. Nano-drug delivery system has the potential to enhance HK delivery and therefore, enhance its anti-cancer activity.

Purpose

The study’s aim is to design novel PEGylated-PLGA polymeric nanocapsules (NCs) for HK delivery to breast tumor-bearing mice after systemic administration.

Methods

Formulation of different HK-loaded NCs and their physio-chemical characterization were optimized through the use of different formulation variables. The antitumor activity of the HK-loaded NCs was investigated both in vitro using MCF-7 and EAC breast cancer cell lines and in vivo using solid Ehrlich carcinoma (SEC) breast cancer model.

Results

The optimum HK-loaded NCs were prepared from 15% PEG-PLGA diblock copolymer and exhibited the lowest nano size of 125 nm, smooth spherical morphology, highest drug loading of 94% and highest cellular uptake into breast cancer cells. HK-loaded PEGylated NCs can effectively inhibit the in vitro cell growth of breast cancer cells by 80.2% and 58.1% compared to 35% and 31% with free HK in the case of MCF-7 and EAC, respectively. HK-loaded NCs inhibited SEC tumor growth by 2.3 fold significantly higher than free HK, in vivo.

Conclusion

The designed drug delivery system encapsulating HK exhibited a pronounced decrease in tumor growth biomarkers meanwhile proved its safety in animals. Therefore, 15% PEGylated HK-loaded NCs may act as a promising new approach for breast cancer treatment.

Magnetically Navigated Core-Shell Polymer Capsules as Nanoreactors Loadable at the Oil/Water Interface

Polymer core-shell nanocapsules with magnetic nanoparticles embedded in their oil cores were fabricated and applied as nano(photo)reactors. Superparamagnetic iron oxide nanoparticles (SPIONs) coated with oleic acid were first synthesized and characterized structurally, and their magnetic properties were determined. The capsules with chitosan-based shells were then formed in a one-step process by sonication-assisted mixing of (1) an aqueous solution of the hydrophobically derived chitosan and (2) oleic acid containing the dispersed SPIONs. In this way, magnetic capsules with a diameter of approximately 500-600 nm containing encapsulated SPIONs with an average diameter of approximately 20-30 nm were formed as revealed by dynamic light scattering and scanning transmission electron microscopy measurements. The composition and magnetic properties of the formed capsules were also followed using dynamic light scattering, electron microscopies, and magnetic force microscopy. The water-dispersible capsules, thanks to their magnetic properties, were then navigated in a static magnetic field gradient and transferred between the water and oil phases, as evidenced by fluorescence microscopy. In this way, the capsules could be loaded in a controlled way with a hydrophobic reactant, perylene, which was later photooxidized upon transferring the capsules to the aqueous phase. The capsules were shown to serve as robust reloadable nanoreactors/nanocontainers that via magnetic navigation can be transferred between immiscible phases without disruption. These features make them promising reusable systems not only for loading and carrying lipophilic actives, conducting useful reactions in the confined environment of the capsules, but also for magnetically separating and guiding the encapsulated active molecules to the site of action.

Palm Oil in Lipid-Based Formulations and Drug Delivery Systems

Palm oil is natural oil packed with important compounds and fatty acids ready to be exploited in lipid-based formulations and drug delivery. Palm oil and palm kernel oil contain long-chain and medium-chain triglycerides, respectively, including phytonutrients such as tocotrienol, tocopherol and carotenes. The exploitation of these compounds in a lipid-based formulation would be able to address hydrophobicity, lipophilicity, poor bioavailability and low water-solubility of many current drugs. The utilisation of palm oil as part of the drug delivery system seemed to improve the bioavailability and solubility of the drug, stabilising emulsification of formulation between emulsifier and surfactant, promoting enhanced drug permeability and performance, as well as extending the shelf-life of the drug. Despite the complexity in designing lipid-based formulations, palm oil has proven to offer dynamic behaviour in providing versatility in drug design, form and delivery. However, the knowledge and application of palm oil and its fractions in lipid-based formulation are scarce and interspersed. Therefore, this study aims to focus on the research and outcomes of using palm oil in lipid-based formulations and drug delivery systems, due to the importance of establishing its capabilities and benefits.

Stimuli-Responsive Tannin-FeIII Hybrid Microcapsules Demonstrated by the Active Release of an Anti-Tuberculosis Agent

A simple and facile strategy for the creation of ferric tannin microcapsules around a liquid, non-sacrificial core is described. The assembly of the capsules occurs rapidly once ferric tannin complexes are subjected to ultrasonic treatment. The driving forces for the rapid capsule assembly reside in the strategy of adding ferric ions into the initial emulsion, which promotes shell formation and stability through well-known complexation effects. This is the first time that microcapsule assemblies of monomeric tannins like epigallocatechin-3-O-gallate has been demonstrated, which are reportedly unable to form dispersing microcapsules in the absence of a templating metal. The efficacy of the approach is demonstrated by the complete release of a hydrophobic molecule that is active against M. tuberculosis by using Acacia tannin capsules. The release kinetics of the active molecule were of zeroth order over a 12 h time frame.

Polymeric nanocapsules as drug carriers for sustained anticancer activity of calcitriol in breast cancer cells

Clinical use of calcitriol (1,25-dihydroxyvitamin D₃) as an anticancer agent is currently limited by the requirement of supraphysiological doses and associated hypercalcemia. Nanoencapsulation of calcitriol is a strategy to overcome these drawbacks, allowing reduced administrated doses and/or frequency, while retaining the therapeutic activity towards cancer cells. For this purpose, we investigated the impact of calcitriol encapsulation on its antiproliferative activity and optimized formulation parameters with that respect. Calcitriol-loaded polymeric nanoparticles with different polymer:oil ratios were prepared by the nanoprecipitation method. Nanoparticles had similar mean size (200 nm) and EE (85%) whereas their release profile strongly depended on formulation parameters. Antiproliferative and cytotoxic activities of formulated calcitriol were evaluated in vitro using human breast adenocarcinoma cells (MCF-7) and showed that calcitriol-induced cell growth inhibition was closely related to its release kinetics. For the most suitable formulation, a sustained cell growth inhibition was observed over 10 days compared to free form. Advantages of calcitriol encapsulation and the role of formulation parameters on its biological activity in vitro were demonstrated. Selected nanoparticle formulation is a promising calcitriol delivery system ensuring a prolonged anticancer activity that could improve its therapeutic efficiency.

Poly(l-glutamic acid)-g-poly(ethylene glycol) external layer in polyelectrolyte multilayer films: Characterization and resistance to serum protein adsorption

Formation of protein-resistant surfaces is a major challenge in the design of novel biomaterials and an important strategy to prevent protein adsorption is the formation of protein-resistant coatings. It can be achieved by proper modification of surfaces, e.g., by immobilization of hydrophilic polymers such as poly(ethylene glycol) (PEG). An appropriate method to immobilize PEG at charged surfaces is the adsorption of copolymers with PEG chains grafted onto polyelectrolyte backbone. The growing interest in the use of polyelectrolyte multilayer coatings in biomedical applications to improve biocompatibility and/or to prepare coating with antiadhesive properties has been the main reason for these studies. Therefore the aim was to produce protein resistant polyelectrolyte multilayer films. They were formed via the layer-by-layer approach, while their pegylation by the deposition of pegylated polyanion, PGA-g-PEG, as an external layer. The influence of PEG chain length and grafting density of PGA-g-PEG copolymers on the protein antiadhesive properties of pegylated polyelectrolyte multilayer films was investigated. To monitor the formation of pegylated and non-pegylated multilayer films, adsorption of the following proteins: HSA, Fibrinogen, and FBS were measured by quartz crystal microbalance (QCM - D). We found that protein adsorption onto all pegylated polyelectrolyte multilayers was significantly reduced in comparison to non-pegylated ones. Long-term performance tests confirmed the stability and the durability of the protein resistant properties of the pegylated multilayers. Antiadhesive properties of tested surfaces pegylated by PGA-g-PEG were compared to the available data for pegylated polycation PLL-g-PEG.

The effect of anionic dicephalic surfactants on fabrication of varied-core nanocarriers for sustained release of porphyrin photosensitizers

Double-headed anionic surfactants could provide a profound group of efficient stabilizers of new template-mediated nanocarriers for effective encapsulation and sustained release of highly hydrophobic photosensitizers, and therefore their improved therapeutic activity in photodynamic therapy (PDT) protocols. We have thus encapsulated porphyrin-origin dyes, i.e., verteporfin (VP) and meso-tetraphenylporphyrin (TPP) in different types of sodium alkyliminobisacetates, C_n(COONa)₂-stabilized nanosystems including biocompatible poly(l-glutamic acid)/poly(l-lysine) - PGA/PLL, multilayer nanocapsules (NCs). The latter were prepared via a layer-by-layer (LbL) approach with either solid (nanoprecipitated), or liquid (nanoemulsion-templated) oil core while zeta potential measurements enabled to evaluate progress of the polyelectrolytes LbL deposition on both cores and the NCs' stability. Backscattering profiles (BS) confirmed the long-lasting stability of the optimized nanosystems, which size (<200nm), polidyspersity and morphology were examined by dynamic light scattering (DLS) and atomic force microscopy (AFM) techniques. Our studies indicated that the encapsulation of VP and TPP in the both type of multilayer NCs increases their solubility in aqueous solution and protects them from the surrounding medium. Mainly, it reduces the photobleaching rate of these porphyrin-type photosensitizers and improves their photochemical properties during irradiation in regards to the free (non-encapsulated) molecules. As far as the core-type is considered, both nanoemulsion-loaded porphyrins, photobleached ca. 15-20% faster than the solid nanoparticle analogs. By using 9,10-anthracenediyl-bis(methylene)dimalonic acid (ABMDMA) as a singlet oxygen (¹O₂) scavenger molecule, the enhanced generation of reactive species was evaluated for the both encapsulated photosensitizers in comparison to their native form. In vitro sustained release under physiological conditions or in the presence of human serum albumin (HSA) was achieved in favor of the solid core NCs for VP and TPP. The designed NCs - offering better chemical and physical stability, high loading capacity for the cargo and ability to release it in a controlled and continuous manner - can be considered as efficacious nanocarriers for PDT.