Total hip arthroplasty: to cement or not to cement the acetabular socket? A critical review of the literature

Association of osteotomy, age, and component fixation with the outcomes of total hip arthroplasty in patients with hip dysplasia: a Dutch population-based registry study

BACKGROUND AND PURPOSE

 Hip dysplasia can present challenges for total hip arthroplasty (THA) due to anatomic abnormalities. We aimed to assess the association of age, sex, osteotomies prior to THA, and fixation method on 5- and 10-year revision-free implant survival and patient-reported outcome measures (PROMs) of THAs in patients with hip dysplasia.

METHODS

Using Dutch Arthroplasty Register data, we studied hip dysplasia patients receiving primary THAs in 2007-2021 (n = 7,465). THAs were categorized by age, pelvic osteotomy prior to THA (yes/no), and fixation (cemented, uncemented, hybrid, reverse hybrid). Kaplan-Meier and multivariable Cox models were used to determine 5- and 10-year revision-free implant survival and adjusted hazard ratios including 95% confidence intervals (CIs). Reasons for revision and PROMs were compared within the categories.

RESULTS

 We found a 10-year revision-free implant survival of 94.9% (CI 94.3-95.5). Patients younger than 50 years had a 10-year implant survival of 93.3% (CI 91.9-94.7), Patients with prior pelvic osteotomy had a 10-year implant survival of 92.0% (CI 89.8-94.2). Fixation method and sex were not associated with implant survival. Patients with a prior pelvic osteotomy had more revisions due to cup loosening and reported lower PROM scores than patients without earlier osteotomy.

CONCLUSION

 5- and 10-year revision-free implant survival rates of THA for hip dysplasia are 96.4% and 94.9%. Age and prior osteotomies were associated with decreased implant survival rates in patients with hip dysplasia, while fixation method was not. Prior osteotomies were also associated with reduced PROM scores.

Groove design optimization of femoral heads in solid hip implants: Study on stress distribution and total deformation using FEA and full factorial design

Hip replacement surgery is a common procedure that relies on the implant's design to withstand daily activities. This study aims to investigate the impact of different surface groove designs on the performance of solid hip implants using finite element analysis (FEA) and optimization techniques. The study evaluates the influence of grooves on the stress distribution and total deformation of the implant, considering three designs: no grooves, horizontal grooves, and vertical grooves on the surface of the femoral head. The simulations were conducted using Ansys Mechanical, and the optimization process was carried out using the general full factorial design method in Minitab software. The results demonstrate that the groove design significantly affects the stress distribution and wear of the implant. The vertical groove design shows better overall results, indicating the best performance. The study also evaluated the influence of force on the performance of the implant, with different load range. The optimization process using the general full factorial design method revealed that the optimal groove design was a vertical model with an optimized groove depth and width. These findings offer valuable insights into the impact of surface groove designs on the performance of solid hip implants, leading to better patient outcomes and longer implant lifespan. Overall, this study provides a comprehensive understanding of the effect of surface groove design on the performance of solid hip implants.

Nexus Evaluation Primary Trident II UNcemented shEll (NEPTUNE)

Aims

The primary aim of this study is to assess the survival of the uncemented hydroxyapatite (HA) coated Trident II acetabular component as part of a hybrid total hip arthroplasty (THA) using a cemented Exeter stem. The secondary aims are to assess the complications, joint-specific function, health-related quality of life, and radiological signs of loosening of the acetabular component.

Methods

A single-centre, prospective cohort study of 125 implants will be undertaken. Patients undergoing hybrid THA at the study centre will be recruited. Inclusion criteria are patients suitable for the use of the uncemented acetabular component, aged 18 to 75 years, willing and able to comply with the study protocol, and provide informed consent. Exclusion criteria includes patients not meeting study inclusion criteria, inadequate bone stock to support fixation of the prosthesis, a BMI > 40 kg/m2, or THA performed for pain relief in those with severely restricted mobility.

Results

Implant survival, complications, functional outcomes and radiological assessment up to ten years following index THA (one, two, five, seven, and ten years) will be performed. Functional assessment will include the Oxford Hip Score, Forgotten Joint Score, 12-Item Short Form Health Survey, EuroQol five-dimension health questionnaire, and pain and patient satisfaction. Radiological assessment with assess for acetabula lucent lines, lysis, and loosening according to DeLee and Charnley zones.

Conclusion

This study is part of a stepwise introduction of a new device to orthopaedic practice, and careful monitoring of implants should be carried out as part of the Beyond Compliance principles. The results of this study will provide functional, radiological, and survival data to either support the ongoing use of the HA acetabulum or highlight potential limitations of this new implant before wide adoption.

Development and validation of an algorithm to determine the minimal factors needed for non-invasive measurement of the in vivo primary stability of cementless hip implants

Aseptic loosening is a frequent cause for revision of endoprosthesis. X-ray examinations like Radio-Stereometry-Analysis (RSA) are among the most widely used in vivo methods for its detection. Nevertheless, this method is not used routinely because of bone marker and related radiation exposure. This work aims at creating a new in vivo concept to detect implant stability measuring micromotions without x-ray and to develop a corresponding algorithm. Based on the assumption of contactless measurement, the input parameters for the algorithm are the distances of each ultrasound sensor to the object (prosthesis and bone) and its position. First, the number of parameters necessary for a precise reconstruction and measurement of micromotions between objects had to be defined. Therefore, the algorithm has been tested with simulations of these parameters. Two experimental measurements, either using contact sensors or ultrasound, were used to prove the accuracy of the algorithm. Simulations indicate a high accuracy with three distances as initial parameters for each object. Contact measurements show precise representation of micromotion, and the contactless measurements show the possibility of detecting various materials with a high resolution. This work lays the foundations for non-invasive detection of micromotions between the implant-bone interface.

Increasing age does not influence hip-specific functional outcome or health-related quality of life following total hip arthroplasty

Aims

The primary aim of our study was to assess the influence of age on hip-specific outcome following total hip arthroplasty (THA). Secondary aims were to assess health-related quality of life (HRQoL) and level of activity according to age.

Methods

A prospective cohort study was conducted. All patients were fitted with an Exeter stem with a 32 mm head on highly cross-linked polyethylene (X3RimFit) cemented acetabulum. Patients were recruited into three age groups: < 65 years, 65 to 74 years, and ≥ 75 years, and assessed preoperatively and at three, 12, 24, and 60 months postoperatively. Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), Harris Hip Score (HHS), and Hip disability and Osteoarthritis Outcome Score (HOOS), were used to assess hip-specific outcome. EuroQol five-dimension five-level questionnaire (EQ-5D-5L) and 36-Item Short Form Survey (SF-36) scores were used to assess HRQoL. The Lower Extremity Activity Scale (LEAS) and Timed Up and Go (TUG) were used to assess level of activity.

Results

There were no significant (p > 0.05) differences in the WOMAC scores, HSS, HOOS, or EQ-5D-5L at any postoperative timepoint between the age groups. Patients aged ≥ 75 years had significantly lower physical function (p ≤ 0.010) and physical role (p ≤ 0.047) SF-36 scores at 12, 24, and 60 months, but were equal to that expect of an age-matched population. No differences according to age were observed for the other six domains of the SF-36 (p > 0.060). The ≥ 75 years group had a lower LEAS (p < 0.001) and longer TUG test times (p ≤ 0.032) compared to the < 65 years group, but older age groups had significant (p < 0.001) improvement relative to their preoperative baseline measures.

Conclusion

Age did not influence postoperative hip-specific outcome or HRQoL (according to the EQ-5D) following THA. Despite a significant improvement, older patients had lower postoperative activity levels compared to younger patients, but this may be reflective of the overall physical effect of ageing. Cite this article: Bone Jt Open 2022;3(9):692–700.

Radiographic assessment of the dynasty biofoam acetabular component with a minimum 2 years follow-up

INTRODUCTION

Acetabular components utilising novel ultraporous metal matrices have been recently introduced into clinical practice with improved interference fit, decreased stress shielding, and hope for more reliable osseointegration. 1 such example is the Dynasty Biofoam cup, which has been in clinical use for over a decade but has few reports documenting its clinical and radiographic performance.

METHODS

A single-centre retrospective study was performed evaluating 96 Dynasty Biofoam acetabular components implanted between March 2010 and August 2014 with minimum 2-year radiographic follow-up. Patients that received components for revision surgery or that had early complications postoperatively (femur fracture, prosthetic infection) were excluded. Biofoam patients were compared to 96 patients that received the Trident PSL acetabular component and were matched for age, gender, and BMI. Patient reported outcomes, component position and radiographic features of cup loosening, including radiolucent lines and sclerosis were compared among groups.

RESULTS

Patient-reported outcomes at 2 years were similar among groups. Cup anteversion was similar but inclination was significantly greater in the Biofoam group (p = 0.006). A significantly greater number of Biofoam components exhibited 2-zone (27.2%) and 3-zone (12.0%) radiolucencies compared to 0% of the Trident shells (p < 0.05). 2 Biofoam cups were revised for aseptic loosening compared to no Trident cups (p = 0.49).

DISCUSSION

Despite adequate implant survivorship, over a quarter of Biofoam cups had 2 or more radiolucent zones in early follow-up. Longer follow-up is needed to determine if the aseptic revision rate for this cup will increase.

Wear Risk Prevention and Reduction in Total Hip Arthroplasty. A Personalized Study Comparing Cement and Cementless Fixation Techniques Employing Finite Element Analysis

The wear rate on Total Hip Arthroplasty (THA) entails a heavy burden for patients. This becomes more relevant with increased wear risk and its consequences such as osteolysis. In addition, osteolysis has been described in cemented and uncemented acetabular implants, and nowadays, controversy remains as to whether or not to cement the acetabular component. A personalized theoretical study was carried out to investigate which parameters have an influence on wear risk and to determine the best fixation method. Liner wear risk was assessed for two different types of fixation (cemented vs uncemented) through Finite Elements Analysis (FEA). The intraoperative variables used to determine the wear risk (cervical-diaphyseal angle, Center of Rotation positioning -COR-, head material, head size, and liner thickness) are vital parameters in surgical planning. Two types of tridimensional liner models of Ultra High Molecular Weight Polyethene (UHMWPE) were simulated through finite element analysis (FEA-over 216 cases were the core of this research). A significant relationship was found between the cervical-diaphyseal angle and wear risk (p < 0.0001), especially in valgus morphology. The acetabular fixation technique (p < 0.0001) and liner thickness (p < 0.0001) showed a significant relationship with wear risk. According to our study, using a cemented fixation with a thick liner in the right center of rotation appears to be the proper stratagy for preventing polyethylene liner wear.

Risk factors for a radiolucent line around the acetabular component with an interface bioactive bone cement technique after primary cemented total hip arthroplasty

Aims

The main aims were to identify risk factors predictive of a radiolucent line (RLL) around the acetabular component with an interface bioactive bone cement (IBBC) technique in the first year after THA, and evaluate whether these risk factors influence the development of RLLs at five and ten years after THA.

Methods

A retrospective review was undertaken of 980 primary cemented THAs in 876 patients using cemented acetabular components with the IBBC technique. The outcome variable was any RLLs that could be observed around the acetabular component at the first year after THA. Univariate analyses with univariate logistic regression and multivariate analyses with exact logistic regression were performed to identify risk factors for any RLLs based on radiological classification of hip osteoarthritis.

Results

RLLs were detected in 27.2% of patients one year postoperatively. In multivariate regression analysis controlling for confounders, atrophic osteoarthritis (odds ratio (OR) 2.17 (95% confidence interval (CI), 1.04 to 4.49); p = 0.038) and 26 mm (OR 3.23 (95% CI 1.85 to 5.66); p < 0.001) or 28 mm head diameter (OR 3.64 (95% CI 2.07 to 6.41); p < 0.001) had a significantly greater risk for any RLLs one year after surgery. Structural bone graft (OR 0.19 (95% CI 0.13 to 0.29) p < 0.001) and location of the hip centre within the true acetabular region (OR 0.15 (95% CI 0.09 to 0.24); p < 0.001) were significantly less prognostic. Improvement of the cement-bone interface including complete disappearance and poorly defined RLLs was identified in 15.1% of patients. Kaplan-Meier survival analysis for the acetabular component at ten years with revision of the acetabular component for aseptic loosening as the end point was 100.0% with a RLL and 99.1% without a RLL (95% CI 97.9 to 100). With revision of the acetabular component for any reason as the end point, the survival rate was 99.2% with a RLL (95% CI 97.6 to 100) and 96.5% without a RLL (95% CI 93.4 to 99.7).

Conclusion

This study demonstrates that acetabular bone quality, head diameter, structural bone graft, and hip centre position may influence the presence of the any RLL.

Cite this article: Bone Joint Open 2021;2(5):278–292.

Minimum 5 year follow-up of clinical and radiographic results of cemented acetabular components with an interface bioactive bone cement technique in primary cemented total hip arthroplasty

INTRODUCTION

A well-fixed cement-bone interface is a crucial factor for acetabular and femoral components in cemented total hip arthroplasty (THA). The aim of the present study was to evaluate the middle-term clinical and radiological results of fixing the acetabular component with an interface bioactive bone cement (IBBC) technique in primary cemented THA.

MATERIALS AND METHODS

We undertook a retrospective review was undertaken of 193 primary cemented THAs in 174 patients using acetabular components cemented with an IBBC technique and followed for a minimum of 5 years (mean 8.3 years; range 5-17 years). Baseline data, clinical and radiological outcomes were evaluated.

RESULTS

Japanese Orthopedic Association hip score and modified Harris hip scores demonstrated significant clinical improvement in all patients (p < 0.001). Radiolucent lines were detected in 15 hips (7.8%) at the first year and 24 hips (12.4%) at the final post-operative follow-up. The Kaplan-Meier survivorship with radiographic loosening as the end point was 97.8% [95% confidence interval (CI) 95.2-100]. With revision of the acetabular component for aseptic loosening as the end point, component survival was 99.0% (95% CI 97.5-100). With revision of the acetabular component for any reason as the end point, component survival was 97.0% (95% CI 93.9-100).

CONCLUSIONS

Clinical and radiological results of the acetabular component with the IBBC technique in primary cemented THA were excellent.

Total Hip Arthroplasty in Patients With Sickle Cell Disease: A Comprehensive Systematic Review

BACKGROUND

Total hip arthroplasty (THA) is a common treatment for end-stage osteonecrosis of the hip in patients with sickle cell disease (SCD). This patient population presents unique challenges in the perioperative period. This systematic review aims to investigate the existing literature on the outcomes, complications, and survivorship of primary THA in SCD patients.

METHODS

A systematic search using Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines was performed of PubMed, MEDLINE, EMBASE, and Cochrane databases for clinical studies on THA in SCD patients. Studies on primary THA in SCD patients with a mean follow-up greater than 90 days were included.

RESULTS

Sixteen studies containing 5193 SCD patients met criteria for inclusion. The Coleman Quality of Evidence score ranged from poor to moderate. SCD patients had a significant increase in Harris Hip Scores and Merle d'Aubigne Scores after undergoing THA. Compared to non-SCD patients, SCD patients had increased hospital length-of-stay, 30-day and 90-day readmission rates, and rates of medical complications, including pain crises, acute chest syndrome, cardiac complications, sepsis, and mortality. SCD patients also had increased rates of surgical complications, including wound complications, infection, periprosthetic fracture, and aseptic loosening. Overall, THA revision rates were higher in SCD patients relative to those with primary osteoarthritis.

CONCLUSION

THA remains an effective treatment modality for osteonecrosis of the hip in SCD patients. However, these patients are at increased risk of medical and surgical complications. Surgeons should be aware of the unique challenges in this patient population when counseling and managing these patients in the perioperative period.

The Use of Cement in Hip Arthroplasty: A Contemporary Perspective

Notable advances in hip arthroplasty implants and techniques over the past 60 years have yielded excellent survivorship of fully cemented, hybrid, and reverse hybrid total hip replacements as demonstrated in joint registries worldwide. Major advances in noncemented implants have reduced the use of cement, particularly in North America. Noncemented implants predominate today based on procedural efficiency, concern related to thromboembolic risk, and a historic belief that cement was the primary cause of osteolysis and implant loosening. With the decline of cemented techniques, press-fit fixation has become common even in osteoporotic elderly patients. Unfortunately, there is a troubling rise in intraoperative, as well as early and late postoperative periprosthetic fractures associated with the use of noncemented implants. Despite the success of noncemented fixation, an understanding of modern cement techniques and cemented implant designs is useful to mitigate the risk of periprosthetic fractures. Cemented acetabular components can be considered in elderly patients with osteoporotic or pathologic bone. Cemented stems should be considered with abnormal proximal femoral morphology, conversion of failed hip fixation, inflammatory arthritis, patient age over 75 (especially women), osteoporotic bone (Dorr C), and in the treatment of femoral neck fractures.

Cemented or uncemented acetabular fixation in combination with the Exeter Universal cemented stem

AIMS

To compare long-term survival of all-cemented and hybrid total hip arthroplasty (THA) using the Exeter Universal stem.

METHODS

Details of 1,086 THAs performed between 1999 and 2005 using the Exeter stem and either a cemented (632) or uncemented acetabular component (454) were collected from local records and the New Zealand Joint Registry. A competing risks regression survival analysis was performed with death as the competing risk with adjustments made for age, sex, approach, and bearing.

RESULTS

There were 61 revisions (9.7%; 0.82 revisions/100 observed component years, (OCYs)) in the all-cemented group and 18 (4.0%; 0.30/100 OCYs) in the hybrid group. The cumulative incidence of revision at 18 years was 12.1% for cemented and 5.2% for hybrids. There was a significantly greater risk of revision for all-cemented compared with hybrids (unadjusted sub-hazard ratio (SHR) 2.44; p = 0.001), and of revision for loosening, wear, or osteolysis (unadjusted SHR 3.77; p < 0.001). After adjustment, the increased risk of all-cause revision did not reach significance at age 70 years and above. The advantage for revision for loosening, wear, and osteolysis remained at all ages.

CONCLUSION

This study supports the use of uncemented acetabular fixation when used in combination with the Exeter stem with improved survivorship for revision for aseptic loosening, wear, and osteolysis at all ages and for all-cause revision in patients less than 70 years. Cite this article: Bone Joint J 2020;102-B(4):414-422.

Hybrid Fixation for Total Hip Arthroplasty Showed Improved Survival Over Cemented and Uncemented Fixation: A Single-Center Survival Analysis of 2156 Hips at 12-18 Years

BACKGROUND

Despite increased use of uncemented and hybrid fixation, there is little evidence of their superiority over cemented implants. The aim of this study is to compare the long-term survivorship of cemented, hybrid and uncemented total hip arthroplasty (THA) at varying ages.

METHODS

A total of 2156 hips (1315 cemented, 324 uncemented, and 517 hybrid) were performed in a single center between 1999 and 2005 with follow-up through to 2017. Registry and local databases were used to determine revision rates and cause. Unadjusted and adjusted competing risk survival analysis was performed.

RESULTS

The cumulative incidence of all-cause revision at 18 years was cemented 10.9%, uncemented 8.9%, and hybrid 6.5%. Cemented fixation had a statistically significant higher risk of all-cause revision than hybrid in the adjusted model for all ages to 65 years (subhazard ratios [SHRs], 2.28-4.67) and a higher risk of revision for loosening, wear, or osteolysis at all ages (SHRs, 3.25-6.07). Uncemented fixation showed no advantage over hybrid fixation at any age, but did show advantages over cemented at younger ages (≤60 years) for all-cause revision (SHRs, 2.3-4.3).

CONCLUSION

Hybrid fixation with conventional polyethylene shows an advantage over cemented hips at all ages. Uncemented THA showed improved survival over cemented only at younger ages and no advantage over hybrid THA.

To cement or not to cement acetabular cups in total hip arthroplasty: a systematic review and re-evaluation

INTRODUCTION

Total Hip Arthroplasty (THA) in the treatment of primary osteoarthritis of the hip has evolved to a very safe and cost-effective intervention with revision rates below 5% after 10 years. To this day, however, controversy remains on whether or not to cement the acetabular cup.

METHODS

A comprehensive PubMed search of the English literature for studies published between 2007 and 2018 was performed. Studies comparing the clinical (revision rate, functionality), radiological (wear) or economic (cost) differences between cemented (cemented stem with cemented cup) and hybrid (cemented stem with uncemented cup) prostheses for primary osteoarthritis of the hip were identified as eligible.

RESULTS

A total of 1032 studies were identified whereof twelve were included for qualitative synthesis. All studies concerning the risk of revision were based on registry data, covering a total of 365,693 cups. Cemented prostheses had a similar or lower risk of revision compared to hybrid prostheses in every study, but performed slightly worse on functionality and quality of life. While cemented prostheses were the cheapest option, hybrids were the most cost-effective.

DISCUSSION

The widespread preference for cementless fixation of the acetabulum cannot be explained by a superior survival of cementless or hybrid models. Irrespective of age, cemented fixation of the acetabulum remains the gold standard to which other techniques should be compared.

How long does a hip replacement last? A systematic review and meta-analysis of case series and national registry reports with more than 15 years of follow-up

BACKGROUND

Total hip replacement is a common and highly effective operation. All hip replacements would eventually fail if in situ long enough and it is important that patients understand when this might happen. We aimed to answer the question: how long does a hip replacement last?

METHODS

We did a systematic review and meta-analysis with a search of MEDLINE and Embase from the start of records to Sept 12, 2017. We included articles reporting 15-year survival of primary, conventional total hip replacement constructs in patients with osteoarthritis. We extracted survival and implant data and used all-cause construct survival as the primary outcome. We also reviewed reports of national joint replacement registries, and extracted data for a separate analysis. In the meta-analyses, we weighted each series and calculated a pooled survival estimate for each source of data. This study was registered with PROSPERO (CRD42018085642).

FINDINGS

We identified 140 eligible articles reporting 150 series, and included 44 of these series (13 212 total hip placements). National joint replacement registries from Australia and Finland provided data for 92 series (215 676 total hip replacements). The 25-year pooled survival of hip replacements from case series was 77·6% (95% CI 76·0-79·2) and from joint replacement registries was 57·9% (95% CI 57·1-58·7).

INTERPRETATION

Assuming that estimates from national registries are less likely to be biased, patients and surgeons can expect a hip replacement to last 25 years in around 58% of patients.

FUNDING

National Institute for Health Research, National Joint Registry for England, Wales, Northern Ireland and Isle of Man, and The Royal College of Surgeons of England.

Osteolysis as it Pertains to Total Hip Arthroplasty

Osteolysis is a long-term complication of total hip arthroplasty (THA). As the projected number of THAs performed annually increases, osteolysis will likely continue to occur. However, because of advancements in prosthesis design, metallurgy, and enhanced bearing surfaces, fewer revision THAs will be linked to osteolysis and aseptic loosening. Despite these improvements, no preventative therapies are currently available for the management of osteolysis other than removing and replacing the source of bearing wear.

Acetabular Subchondral Bone Decortication and Its Role in the Outcome of Cemented Total Hip Replacement in Young Patients

Purpose

Long-term fixation of cemented acetabular components can be problematic in younger active patients. Our technique is put forward to improve outcomes and maximize implant survivorship in this particular patient population.

Materials and Methods

We report on a cohort of young adult patients (less than 55 years old) with cemented total hip replacement (THR) using a novel technique in preparing and cementing the acetabulum with a minimum follow-up of 10 years (mean follow-up, 14 years). Retrospectively collected data on clinical and radiological outcomes were reviewed.

Results

Sixty-five THRs were performed with the minimum study follow-up period. Average age for patients was 44 years old (range, 19–55 years). The mean Hip Disability and Osteoarthritis Outcome Score for patients at final appointment was 92.7. Radiographs taken at an average of 14 years after operation showed 63 of 65 hips showed no evidence of any radiological loosening. Cup survivorship was 100% at the end of the study period.

Conclusion

Our technique of preparing the acetabulum in combination with cement fixation is reproducible with excellent results in a cohort of patients prone to early aseptic loosening of the acetabular component.

The Exeter V40 cemented femoral component at a minimum 10-year follow-up: the first 540 cases

Aims

The aim of this study was to report the initial results of the Exeter V40 stem, which became available in 2000.

Patients and Methods

A total of 540 total hip arthroplasties (THAs) were performed in our unit using this stem between December 2000 and May 2002. Our routine protocol is to review patients postoperatively and at one, five, and ten years following surgery.

Results

A total of 145 patients (26.9%) died before ten years and of the remaining 395 stems, 374 (94.7%) remain in situ. A total of 21 well-fixed stems (5.3%) were revised. Ten were exchanged using a cement-in-cement technique to facilitate acetabular revision. Three were revised for infection, one for instability, one for fracture of the stem, and six following a periprosthetic fracture. An additional 16 acetabular components (4.1%) were revised; five for aseptic loosening and 11 for instability. There were no revisions for aseptic loosening of the stem, and no evidence of aseptic loosening in any hip. The fate of every stem is known and all patients remain under review. Survivorship, with revision of the stem for aseptic loosening as the endpoint, was 100%. At 13.5 years, the Kaplan-Meier survival rate for all-cause revision of the stem was 96.8% (95% confidence interval (CI) 94.8 to 98.8) and all-cause revision (including acetabular revision, infection, and instability) was 91.2% (95% CI 88.3 to 94.1).

Conclusion

Conclusion No stem was revised for aseptic loosening in this series. The contemporary Exeter V40 stem continues to perform well, and survival has remained comparable with that of the Exeter Universal stem. Cite this article: Bone Joint J 2018;100-B:1002-9.

Long-term survival of the cemented Müller CDH stem: a minimum follow-up of 10 years

INTRODUCTION

Total hip arthroplasty in patients with altered anatomy of the hip and femur, such as in congenital dysplasia of the hip, is challenging and often requires specially designed stems. Müller straight stems have shown excellent long-term results; however, long-term data on the analogous cemented Müller CDH stem are still missing. The aim of this study was to analyze long-term survival, identify potential risk factors for aseptic loosening, and analyze radiological outcome of the cemented Müller CDH stems.

MATERIALS AND METHODS

Between 01/1985 and 06/2005, 95 Müller CDH stems (Zimmer, Winterthur, Switzerland) made up of 3 different materials were cemented using 2 different bone cements: 38 of stainless steel/high-viscosity cement, 31 of a cobalt-chrome-based alloy (CoCr)/low-viscosity cement, and 26 of a titanium-based alloy (Ti)/low-viscosity cement. All patients had a prospective clinical and radiological follow-up according to the standards of our institution. The cumulative incidence for revision of the stem was calculated using a competing risk model. To identify demographic and implant-related risk factors for aseptic loosening of the stem, a multivariate regression model for competing risks was performed.

RESULTS

The cumulative risk of revision at 15 years was 12.5% (95% CI 6.6-20.5%) for aseptic loosening of the stem as endpoint, with marked differences for the various stem materials used: stainless steel 2.7% (0.2-12.3%), CoCr 12.9% (4.0-27.3%), and Ti 24.5% (9.6-43.1%). Regression modeling revealed that Ti stems in combination with low-viscosity cement (HR 10.2) and implantation with an axis deviation greater than 3° (HR 3.8) are risk factors for aseptic loosening.

CONCLUSIONS

Long-term survival of the cemented Müller CDH stem is comparable to other Müller-type straight stems and uncemented implants. Similar to the original Ti Müller straight stem, the Ti Müller CDH stem also showed an increased risk for aseptic loosening and should, therefore, no longer be used.

The Morscher Press-Fit Acetabular Component: An Independent Long-Term Review at 18-22 Years

BACKGROUND

There are relatively few 20-year results of uncemented acetabular components, and most of these are modular designs. This study reports the 20-year results of a monoblock press-fit acetabular component.

METHODS

A total of 122 total hip arthroplasties (111 patients) using the Morscher cup were reviewed at a mean of 19.7 years. The average age at implantation was 57.3 years (range, 36-74 years), and 81 (66%) were men.

RESULTS

Twenty-two patients (25 hips) had died. Seven hips were revised, including 5 acetabular revisions. Six patients (6 hips) declined to participate but were known not to have been revised. The mean Oxford hip score was 41.1 (range, 22-48), and the mean reduced Western Ontario and McMaster Universities Osteoarthritis Index score was 5.7/48 (range, 0-24). Eccentric wear was seen in 13 (15.7%) and major osteolysis in 14 (17%) of 82 surviving hips with radiographs. The all-cause revision rate was 0.32 per 100 observed component years (95% confidence interval [CI], 0.13-0.66). The 20-year Kaplan-Meier survival was 93.4% (CI, 86.6-96.8) for all-cause revisions, 95.5% (CI, 89.4-98.1) for any acetabular revision, and 97.1% (CI, 91.2-99.1) for acetabular aseptic loosening, wear, or osteolysis.

CONCLUSION

The Morscher acetabular component has continued to perform well at 20 years despite using conventional polyethylene with results that match or surpass other cementless acetabulae.

Cementless Total Hip Arthroplasty in Octogenarians

BACKGROUND

Although several studies indicate excellent results for cementless implants, controversy persists regarding its use in elderly patients. We determined to evaluate the outcome on patients aged over 80 years who were treated with cementless total hip arthroplasty for primary osteoarthritis of the hip.

METHODS

We assessed the data of 162 consecutive total hip arthroplasties in octogenarian patients (mean age 83 years, range 80-96 years). A control group was created, consisting of 342 patients aged younger than 80 years (mean age 65 years, range 37-79 years). The median follow-up of the cohort was 128.4 months (range 6-211).

RESULTS

Competing risk analyses revealed a cumulative implant survival of 98.1% at 5 and 10 years in the study group compared to 99.1% and 98.4% in the control group, taking system exchange as the end point. No differences in regard to system exchange could be detected between the groups. A significantly worsened complication-free survival rate was evident in the octogenarian group. Osteoporosis was the most powerful risk factor that proved to have a significant negative impact on development of complications.

CONCLUSION

Uncemented total hip arthroplasty is a viable option for the elderly patient. In this population sector, an excellent rate of implant survival can be expected. However, a significant increase of total complications in the octogenarian group could be detected, and was mainly caused by an elevated number of early postoperative complications. Osteoporosis turned out to be a strong risk factor in regard to complication-free survival. Surgeons should therefore be aware of this.

Reverse hybrid total hip arthroplasty

Background and purpose - The use of a cemented cup together with an uncemented stem in total hip arthroplasty (THA) has become popular in Norway and Sweden during the last decade. The results of this prosthetic concept, reverse hybrid THA, have been sparsely described. The Nordic Arthroplasty Register Association (NARA) has already published 2 papers describing results of reverse hybrid THAs in different age groups. Based on data collected over 2 additional years, we wanted to perform in depth analyses of not only the reverse hybrid concept but also of the different cup/stem combinations used. Patients and methods - From the NARA, we extracted data on reverse hybrid THAs from January 1, 2000 until December 31, 2013. 38,415 such hips were studied and compared with cemented THAs. The Kaplan-Meier method and Cox regression analyses were used to estimate the prosthesis survival and the relative risk of revision. The main endpoint was revision for any reason. We also performed specific analyses regarding the different reasons for revision and analyses regarding the cup/stem combinations used in more than 500 cases. Results - We found a higher rate of revision for reverse hybrids than for cemented THAs, with an adjusted relative risk of revision (RR) of 1.4 (95% CI: 1.3-1.5). At 10 years, the survival rate was 94% (CI: 94-95) for cemented THAs and 92% (95% CI: 92-93) for reverse hybrids. The results for the reverse hybrid THAs were inferior to those for cemented THAs in patients aged 55 years or more (RR =1.1, CI: 1.0-1.3; p < 0.05). We found a higher rate of early revision due to periprosthetic femoral fracture for reverse hybrids than for cemented THAs in patients aged 55 years or more (RR =3.1, CI: 2.2-4.5; p < 0.001). Interpretation - Reverse hybrid THAs had a slightly higher rate of revision than cemented THAs in patients aged 55 or more. The difference in survival was mainly caused by a higher incidence of early revision due to periprosthetic femoral fracture in the reversed hybrid THAs.

A bias-adjusted evidence synthesis of RCT and observational data: the case of total hip replacement

Evaluation of clinical effectiveness of medical devices differs in some aspects from the evaluation of pharmaceuticals. One of the main challenges identified is lack of robust evidence and a will to make use of experimental and observational studies (OSs) in quantitative evidence synthesis accounting for internal and external biases. Using a case study of total hip replacement to compare the risk of revision of cemented and uncemented implant fixation modalities, we pooled treatment effect estimates from OS and RCTs, and simplified existing methods for bias-adjusted evidence synthesis to enhance practical application. We performed an elicitation exercise using methodological and clinical experts to determine the strength of beliefs about the magnitude of internal and external bias affecting estimates of treatment effect. We incorporated the bias-adjusted treatment effects into a generalized evidence synthesis, calculating both frequentist and Bayesian statistical models. We estimated relative risks as summary effect estimates with 95% confidence/credibility intervals to capture uncertainty. When we compared alternative approaches to synthesizing evidence, we found that the pooled effect size strongly depended on the inclusion of observational data as well as on the use bias-adjusted estimates. We demonstrated the feasibility of using observational studies in meta-analyses to complement RCTs and incorporate evidence from a wider spectrum of clinically relevant studies and healthcare settings. To ensure internal validity, OS data require sufficient correction for confounding and selection bias, either through study design and primary analysis, or by applying post-hoc bias adjustments to the results. © 2017 The Authors. Health Economics published by John Wiley & Sons, Ltd.

The Relative Merits of Cemented and Uncemented Prostheses in Total Hip Arthroplasty

The results of modern cemented and uncemented total hip arthroplasties are outstanding and both systems have their advantages and disadvantages. This paper aims to examine the designs of different types of prostheses, some history behind their development and the reported results. Particular emphasis is placed on cemented stem design and the details of cementing technique.

A pilot trial comparing the tear-out behavior in screw-sockets and cemented polyethylene acetabular components - a cadaveric study

BACKGROUND

The removal of well-fixed acetabular components following THA (total hip arthroplasty) is a difficult operation and could be accompanied by the loss of acetabular bone stock. The optimal method for fixation is still under debate. The aim of this pilot study was to compare the tear-out resistance and failure behavior between osseo-integrated and non-integrated screw cups. Furthermore, we examined whether there are differences in the properties mentioned between screw sockets and cemented polyethylene cups.

HYPOTHESIS

Tear-out resistance and related mechanical work required for the tear-out of osseo-integrated screw sockets are higher than in non-integrated screw sockets.

PATIENTS AND METHODS

Ten human coxal bones from six cadavers with osseo-integrated screw sockets (n=4), non-integrated (implanted post-mortem, n=3) screw sockets and cemented polyethylene cups (n=3) were used for tear-out testing. The parameters axial failure load and mechanical work for tear-out were introduced as measures for determining the stability of acetabular components following THA.

RESULTS

The osseo-integrated screw sockets yielded slightly higher tear-out resistance (1.61±0.26kN) and related mechanical work compared to the non-integrated screw sockets (1.23±0.39kN, P=0.4). The cemented polyethylene cups yielded the lowest tear-out resistance with a failure load of 1.18±0.24kN. Compared to the screw cups implanted while alive, they also differ on a non-significant level (P=0.1). Osseous failure patterns differed especially for the screw sockets compared to the cemented polyethylene cups.

DISCUSSION

Osseo-integration did not greatly influence the tear-out stability in cementless screw sockets following axial loading. Furthermore, the strength of the bone-implant-interface of cementless screw sockets appears to be similar to cemented polyethylene cups. However, given the high failure load, high mechanical load and because of the related bone failure patterns, removal should not be performed by means of tear-out but rather by osteotomes or other curved cutting devices to preserve the acetabular bone stock.

LEVEL OF EVIDENCE

Level III, case-control-study.

Real-Time Protein and Cell Binding Measurements on Hydroxyapatite Coatings

Although a lot of in vitro and in vivo assays have been performed during the last few decades years for hydroxyapatite bioactive coatings, there is a lack of exploitation of real-time in vitro interaction measurements. In the present work, real-time interactions for a plasma sprayed hydroxyapatite coating were measured by a Multi-Parametric Surface Plasmon Resonance (MP-SPR), and the results were compared with standard traditional cell viability in vitro assays. MP-SPR is proven to be suitable not only for measurement of molecule-molecule interactions but also molecule-material interaction measurements and cell interaction. Although SPR is extensively utilized in interaction studies, recent research of protein or cell adsorption on hydroxyapatite coatings for prostheses applications was not found. The as-sprayed hydroxyapatite coating resulted in 62.4% of crystalline phase and an average thickness of 24 ± 6 μm. The MP-SPR was used to measure lysozyme protein and human mesenchymal stem cells interaction to the hydroxyapatite coating. A comparison between the standard gold sensor and Hydroxyapatite (HA)-plasma coated sensor denoted a clearly favourable cell attachment on HA coated sensor as a significantly higher signal of cell binding was detected. Moreover, traditional cell viability and proliferation tests showed increased activity with culture time indicating that cells were proliferating on HA coating. Cells show homogeneous distribution and proliferation along the HA surface between one and seven days with no significant mortality. Cells were flattened and spread on rough surfaces from the first day, with increasing cytoplasmatic extensions during the culture time.

Total hip replacement and surface replacement for the treatment of pain and disability resulting from end-stage arthritis of the hip (review of technology appraisal guidance 2 and 44): systematic review and economic evaluation

BACKGROUND

Total hip replacement (THR) involves the replacement of a damaged hip joint with an artificial hip prosthesis. Resurfacing arthroplasty (RS) involves replacement of the joint surface of the femoral head with a metal surface covering.

OBJECTIVES

To undertake clinical effectiveness and cost-effectiveness analysis of different types of THR and RS for the treatment of pain and disability in people with end-stage arthritis of the hip, in particular to compare the clinical effectiveness and cost-effectiveness of (1) different types of primary THR and RS for people in whom both procedures are suitable and (2) different types of primary THR for people who are not suitable for hip RS.

DATA SOURCES

Electronic databases including MEDLINE, EMBASE, The Cochrane Library, Current Controlled Trials and UK Clinical Research Network (UKCRN) Portfolio Database were searched in December 2012, with searches limited to publications from 2008 and sample sizes of ≥ 100 participants. Reference lists and websites of manufacturers and professional organisations were also screened.

REVIEW METHODS

Systematic reviews of the literature were undertaken to appraise the clinical effectiveness and cost-effectiveness of different types of THR and RS for people with end-stage arthritis of the hip. Included randomised controlled trials (RCTs) and systematic reviews were data extracted and risk of bias and methodological quality were independently assessed by two reviewers using the Cochrane Collaboration risk of bias tool and the Assessment of Multiple Systematic Reviews (AMSTAR) tool. A Markov multistate model was developed for the economic evaluation of the technologies. Sensitivity analyses stratified by sex and controlled for age were carried out to assess the robustness of the results.

RESULTS

A total of 2469 records were screened of which 37 were included, representing 16 RCTs and eight systematic reviews. The mean post-THR Harris Hip Score measured at different follow-up times (from 6 months to 10 years) did not differ between THR groups, including between cross-linked polyethylene and traditional polyethylene cup liners (pooled mean difference 2.29, 95% confidence interval -0.88 to 5.45). Five systematic reviews reported evidence on different types of THR (cemented vs. cementless cup fixation and implant articulation materials) but these reviews were inconclusive. Eleven cost-effectiveness studies were included; four provided relevant cost and utility data for the model. Thirty registry studies were included, with no studies reporting better implant survival for RS than for all types of THR. For all analyses, mean costs for RS were higher than those for THR and mean quality-adjusted life-years (QALYs) were lower. The incremental cost-effectiveness ratio for RS was dominated by THR, that is, THR was cheaper and more effective than RS (for a lifetime horizon in the base-case analysis, the incremental cost of RS was £11,284 and the incremental QALYs were -0.0879). For all age and sex groups RS remained clearly dominated by THR. Cost-effectiveness acceptability curves showed that, for all patients, THR was almost 100% cost-effective at any willingness-to-pay level. There were age and sex differences in the populations with different types of THR and variations in revision rates (from 1.6% to 3.5% at 9 years). For the base-case analysis, for all age and sex groups and a lifetime horizon, mean costs for category E (cemented components with a polyethylene-on-ceramic articulation) were slightly lower and mean QALYs for category E were slightly higher than those for all other THR categories in both deterministic and probabilistic analyses. Hence, category E dominated the other four categories. Sensitivity analysis using an age- and sex-adjusted log-normal model demonstrated that, over a lifetime horizon and at a willingness-to-pay threshold of £20,000 per QALY, categories A and E were equally likely (50%) to be cost-effective.

LIMITATIONS

A large proportion of the included studies were inconclusive because of poor reporting, missing data, inconsistent results and/or great uncertainty in the treatment effect estimates. This warrants cautious interpretation of the findings. The evidence on complications was scarce, which may be because of the absence or rarity of these events or because of under-reporting. The poor reporting meant that it was not possible to explore contextual factors that might have influenced study results and also reduced the applicability of the findings to routine clinical practice in the UK. The scope of the review was limited to evidence published in English in 2008 or later, which could be interpreted as a weakness; however, systematic reviews would provide summary evidence for studies published before 2008.

CONCLUSIONS

Compared with THR, revision rates for RS were higher, mean costs for RS were higher and mean QALYs gained were lower; RS was dominated by THR. Similar results were obtained in the deterministic and probabilistic analyses and for all age and sex groups THR was almost 100% cost-effective at any willingness-to-pay level. Revision rates for all types of THR were low. Category A THR (cemented components with a polyethylene-on-metal articulation) was more cost-effective for older age groups. However, across all age-sex groups combined, the mean cost for category E THR (cemented components with a polyethylene-on-ceramic articulation) was slightly lower and the mean QALYs gained were slightly higher. Category E therefore dominated the other four categories. Certain types of THR appeared to confer some benefit, including larger femoral head sizes, use of a cemented cup, use of a cross-linked polyethylene cup liner and a ceramic-on-ceramic as opposed to a metal-on-polyethylene articulation. Further RCTs with long-term follow-up are needed.

STUDY REGISTRATION

This study is registered as PROSPERO CRD42013003924.

FUNDING

The National Institute for Health Research Health Technology Assessment programme.

A randomised controlled trial comparing highly cross-linked and contemporary annealed polyethylene after a minimal eight-year follow-up in total hip arthroplasty using cemented acetabular components

Most published randomised controlled trials which compare the rates of wear of conventional and cross-linked (XL) polyethylene (PE) in total hip arthroplasty (THA) have described their use with a cementless acetabular component.

We conducted a prospective randomised study to assess the rates of penetration of two distinct types of PE in otherwise identical cemented all-PE acetabular components.

A total of 100 consecutive patients for THA were randomised to receive an acetabular component which had been either highly XL then remelted or moderately XL then annealed.

After a minimum of eight years follow-up, 38 hips in the XL group and 30 hips in the annealed group had complete data (mean follow-up of 9.1 years (7.6 to 10.7) and 8.7 years (7.2 to 10.2), respectively). In the XL group, the steady state rate of penetration from one year onwards was -0.0002 mm/year (sd 0.108): in the annealed group it was 0.1382 mm/year (sd 0.129) (Mann–Whitney U test, p < 0.001). No complication specific to either material was recorded.

These results show that the yearly linear rate of femoral head penetration can be significantly reduced by using a highly XLPE cemented acetabular component.

Cite this article: Bone Joint J 2015;97-B:1458–62.

Validation of a computer-assisted method for measurement of radiographic wear in total hip arthroplasty using all polyethylene cemented acetabular components

Although cemented all polyethylene (PE) cups have been routinely used in total hip arthroplasty for decades, no computer-assisted method for measurement of radiographic wear has ever been specifically validated for these implants. Using a validated hip phantom model, AP plain hip radiographs were obtained consecutively for eight simulated wear positions. A version of Martell's Hip Analysis Suite software dedicated to all polyethylene sockets was used by three different examiners of varied experience. Bias (mean, standard deviation and 95% confidence interval limit), repeatability (standard deviation and 95% limit) and reproducibility (standard deviation and 95% limit) for two-dimensional wear measurements were assessed, as recommended by the current ASTM guidelines. Using this protocol, the dedicated software showed an overall mean bias of 0.089 ± 0.060 mm (mean ± SD), and 0.118 mm for 95% CI limit. Repeatability (intra examiner) standard deviation and 95% limit were respectively 0.106 mm and 0.292 mm. Reproducibility (inter examiner) standard deviation and 95% limit were respectively 0.112 mm and 0.308 mm. Martell Hip Analysis for all PE cemented cups is a reliable and low-cost instrument in the assessment of wear, despite being less precise than its original version dedicated to cementless components.

How have alternative bearings and modularity affected revision rates in total hip arthroplasty?

BACKGROUND

Total hip arthroplasty (THA) continues to be one of the most successful surgical procedures in the medical field. However, over the last two decades, the use of modularity and alternative bearings in THA has become routine. Given the known problems associated with hard-on-hard bearing couples, including taper failures with more modular stem designs, local and systemic effects from metal-on-metal bearings, and fractures with ceramic-on-ceramic bearings, it is not known whether in aggregate the survivorship of these implants is better or worse than the metal-on-polyethylene bearings that they sought to replace.

QUESTIONS/PURPOSES

Have alternative bearings (metal-on-metal and ceramic-on-ceramic) and implant modularity decreased revision rates of primary THAs?

METHODS

In this systematic review of MEDLINE and EMBASE, we used several Boolean search strings for each topic and surveyed national registry data from English-speaking countries. Clinical research (Level IV or higher) with ≥ 5 years of followup was included; retrieval studies and case reports were excluded. We included registry data at ≥ 7 years followup. A total of 32 studies (and five registry reports) on metal-on-metal, 19 studies (and five registry reports) on ceramic-on-ceramic, and 20 studies (and one registry report) on modular stem designs met inclusion criteria and were evaluated in detail. Insufficient data were available on metal-on-ceramic and ceramic-on-metal implants, and monoblock acetabular designs were evaluated in another recent systematic review so these were not evaluated here.

RESULTS

There was no evidence in the literature that alternative bearings (either metal-on-metal or ceramic-on-ceramic) in THA have decreased revision rates. Registry data, however, showed that large head metal-on-metal implants have lower 7- to 10-year survivorship than do standard bearings. In THA, modular exchangeable femoral neck implants had a lower 10-year survival rate in both literature reviews and in registry data compared with combined registry primary THA implant survivorship.

CONCLUSIONS

Despite improvements in implant technology, there is no evidence that alternative bearings or modularity have resulted in decreased THA revision rates after 5 years. In fact, both large head metal-on-metal THA and added modularity may well lower survivorship and should only be used in select cases in which the mission cannot be achieved without it. Based on this experience, followup and/or postmarket surveillance studies should have a duration of at least 5 years before introducing new alternative bearings or modularity on a widespread scale.

High early failure rate after cementless hip replacement in the octogenarian

BACKGROUND

Use of cementless hip replacements is increasing in many countries, but the best method for fixation for octogenarian patients remains unknown.

QUESTIONS/PURPOSES

We studied how fixation method (cemented, cementless, hybrid) affects the survival of primary hip replacements and mortality in patients 80 years or older. Specifically, we asked if fixation method affects (1) the risk of revision; (2) the reasons for revision; and (3) the mortality after contemporary primary hip replacement in octogenarian patients.

METHODS

A total of 4777 primary total hip replacements were performed in 4509 octogenarian patients with primary osteoarthritis in Finland between 1998 and 2009 and were registered in the Finnish Arthroplasty Register. Comorbidity data were collected from a nationwide quality register. Survival of hip replacements, using any revision as the end point, and mortality were analyzed using competing risks survival analysis and Cox regression analysis. The average followup was 4 years (range, 1-13 years).

RESULTS

Cementless hip replacements were associated with a higher rate of early (within 1 year) revision compared with cemented hip replacements (hazard ratio, 2.9; 95% CI, 1.7-5.1), particularly in women. The difference was not explained by comorbidity or provider-related factors. Periprosthetic fracture was the leading mode of failure of cementless hip replacements. After 1 year, there were no differences in the survival rates although 10-year survival was slightly lower for cementless than cemented and hybrid hip replacements (93.9% [95% CI, 91.1%-96.7%] versus 97.4% [95% CI, 96.9%-98.0%] and 98.1% [95% CI, 96.9%-99.4%], respectively). Fixation method was not associated with mortality.

CONCLUSIONS

Cementless fixation was associated with an increased risk of revision and did not provide any benefit in terms of lower mortality in octogenarian patients.

LEVEL OF EVIDENCE

Level II, therapeutic study. See the Instructions for Authors for a complete description of levels of evidence.

Total femoral replacement for salvage of periprosthetic fractures

Patients with complex periprosthetic fracture patterns of the femur may ultimately require amputation. Some authors have described the use of mega-endoprostheses as a salvage procedure. This study reports functional outcome, complications, and implant and patient survival after total femoral replacement (TFR) for salvage of periprosthetic fracture of the femur. A prospective database of 20 consecutive patients who underwent TFR for salvage of a periprosthetic fracture was compiled. Patient demographics, mobility information, and preoperative and postoperative Short Form 12-item Survey (SF-12) and 1-year Toronto Extremity Salvage Score (TESS) data were recorded. Postoperative complications were obtained from the hospital database and patient medical notes. One patient was lost to follow-up and was excluded from analysis. The study included 8 men and 11 women, with a mean age of 68.4 years. No significant difference was noted in the prefracture physical (4.4; P=.13) or mental (0.3; P=.78) component scores of the SF-12 compared with 1-year scores. The TESS at 1 year was 69%. However, patients were more likely to require a walking aid postoperatively (P<.0001). One-fourth of the patients had a postoperative medical complication. In addition, 1 patient had a dislocation and 2 patients had a periprosthetic infection. The implant survival rate was 86% at 10 years; however, the 10-year mortality rate was 58%. Although TFR for salvage of a periprosthetic fracture of the femur offers good functional outcome and implant survival, it is at the expense of postoperative complications, and TFR is associated with a high long-term mortality rate.

Total hip replacement for the treatment of end stage arthritis of the hip: a systematic review and meta-analysis

Background

Evolvements in the design, fixation methods, size, and bearing surface of implants for total hip replacement (THR) have led to a variety of options for healthcare professionals to consider. The need to determine the most optimal combinations of THR implant is warranted. This systematic review evaluated the clinical effectiveness of different types of THR used for the treatment of end stage arthritis of the hip.

Methods

A comprehensive literature search was undertaken in major health databases. Randomised controlled trials (RCTs) and systematic reviews published from 2008 onwards comparing different types of primary THR in patients with end stage arthritis of the hip were included.

Results

Fourteen RCTs and five systematic reviews were included. Patients experienced significant post-THR improvements in Harris Hip scores, but this did not differ between impact types. There was a reduced risk of implant dislocation after receiving a larger femoral head size (36 mm vs. 28 mm; RR = 0.17, 95% CI: 0.04, 0.78) or cemented cup (vs. cementless cup; pooled odds ratio: 0.34, 95% CI: 0.13, 0.89). Recipients of cross-linked vs. conventional polyethylene cup liners experienced reduced femoral head penetration and revision. There was no impact of femoral stem fixation and cup shell design on implant survival rates. Evidence on mortality and complications (aseptic loosening, femoral fracture) was inconclusive.

Conclusions

The majority of evidence was inconclusive due to poor reporting, missing data, or uncertainty in treatment estimates. The findings warrant cautious interpretation given the risk of bias (blinding, attrition), methodological limitations (small sample size, low event counts, short follow-up), and poor reporting. Long-term pragmatic RCTs are needed to allow for more definitive conclusions. Authors are encouraged to specify the minimal clinically important difference and power calculation for their primary outcome(s) as well CONSORT, PRISMA and STROBE guidelines to ensure better reporting and more reliable production and assessment of evidence.

Dimensional analysis of total hip arthroplasty polyethylenes

Objective

This paper performs a dimensional analysis of different total hip arthroplasty polyethylenes, cemented and non-cemented, Brazilian made and imported.

Methods

It was considered acetabular components with 50 mm for the 28 mm femoral heads. Dimensional analysis was performed on a 3D coordinate Carl-Zeiss robotic device. Polyethylene thickness and its external measurements (maximum diameter and diameter for the femoral head) were measured.

Results

The minimum thickness of the polyethylene was guaranteed on all tested components. The thickness of cemented acetabular varied from 19.185 mm to 25.358 mm, while the thickness of the non-cemented acetabular varied from 12.451 mm to 19.232 mm. The thickness was 27.96% lower in non-cemented acetabular components. With respect to the polyethylene acetabular cavity that receives the femoral head, all internal diameters exhibit at least 28 mm. In relation to the maximum outer diameter of the polyethylene, only one cemented acetabular component reached 50 mm in diameter.

Conclusions

There are large differences in measurements between brands and models analyzed. Cementless acetabular components have the smaller thickness. The diameters of non-cemented acetabular were also lower than those cemented at the expense of their need to insert into the metal-back.

Surgical approach and prosthesis fixation in hip arthroplasty world wide

BACKGROUND

Hip arthroplasty is one of the most common and successful surgical procedures worldwide. Component design and materials as well as surgical techniques constantly evolve. There is no consensus among surgeons regarding the ideal surgical approach and method of fixation.

MATERIALS AND METHODS

292 orthopedic surgeons of 10 subspecialties from 57 countries were surveyed on their choice of surgical approach and prosthesis fixation in hip arthroplasty. Their preferences were analyzed according to country of origin, field of expertise and seniority, and compared to current publications.

RESULTS

The response rate was 95-98 %. Surgeons were split between the posterior approach (45 %) and the direct lateral approach (42 %) followed by the anterior approach (10 %) or other (3 %). North American surgeons favored the posterior approach more often than Europeans (69 % compared to 36 %, P < 0.0001) and surgeons from other countries (69 % compared to 45 %, P = 0.01). Sixty-eight percent of all surgeons routinely used noncemented hip prosthesis while 16 % use cemented and 16 % hybrid fixation. Noncemented fixation was preferred among surgeons from Europe and North America compared to other countries (73 % compared to 55 %, P < 0.05). There were no significant differences based on subspecialty, seniority or the number of years of experience.

CONCLUSIONS

The most common surgical approaches in use in hip arthroplasty are posterior and lateral. Anterior approach is used by a minority of orthopedic surgeons for that purpose. Cementing hip prosthesis is falling out of favor among orthopedic surgeons worldwide. The trend toward un-cemented hip arthroplasty is not well supported in the current literature.

The cost analysis of cemented versus cementless total hip replacement operations on the NHS

In a time of limited resources, the debate continues over which types of hip prosthesis are clinically superior and more cost-effective. Orthopaedic surgeons increasingly need robust economic evidence to understand the full value of the operation, and to aid decision making on the 'package' of procedures that are available and to justify their practice beyond traditional clinical preference. In this paper we explore the current economic debate about the merits of cemented and cementless total hip replacement, an issue that continues to divide the orthopaedic community.

Accelerated polyethylene wear and early failure of the uncemented Reflection acetabular component: a ten to fifteen-year follow-up study

PURPOSE

The Reflection® second-generation uncemented acetabular component was designed to address increased rates of failure observed with the early acetabular designs. However, the reported survivorship of this acetabular component has been conflicting. The aim of this study was to describe the ten to 15-year survivorship and polyethylene wear rate for the uncemented Reflection® acetabular component performed as part of a primary total hip replacement.

METHODS

One hundred and four consecutive Reflection® uncemented acetabular components in 97 patients were identified from a prospective arthroplasty database with a minimum of ten years of follow-up. No patient was lost to follow-up. Mean cohort age was 59.1 years.

RESULTS

There were 24 revisions of the acetabular component. The all-cause survival rate at ten years was 77.2% [95% confidence interval (CI) 73.9-80.5]. Mean linear wear was 0.20 mm [standard deviation (SD) 0.08] per year and the volumetric wear was 106.2 mm(3) per year. At final follow-up, more than half the patients had osteolysis identified around the femoral component. The mean Oxford Hip Score was 35.6 (SD 9.8) at a mean follow-up of 11.9 years, with six (11.1%) excellent, 26 (48.1%) good, 17 (31.5%) fair and five (9.3%) poor outcomes. Despite the fact that more than a third had a fair or poor outcome, only four (7.4%) were not satisfied with their hip.

CONCLUSIONS

Due to the high rate of relatively asymptomatic polyethylene wear and osteolysis associated with this acetabular component, in our department, we now review all surviving patients both clinically and radiographically on an annual basis.

Risk factors for aseptic loosening of Müller-type straight stems: a registry-based analysis of 828 consecutive cases with a minimum follow-up of 16 years

Background and purpose Even small differences in design variables for the femoral stem may influence the outcome of a hip arthroplasty. We performed a risk factor analysis for aseptic loosening of 4 different versions of cemented Müller-type straight stems with special emphasis on design modifications (2 shapes, MSS or SL, and 2 materials, CoNiCrMo (Co) or Ti-6Al-7Nb (Ti)). Methods We investigated 828 total hip replacements, which were followed prospectively in our in-house register. All stems were operated in the same setup, using Sulfix-6 bone cement and a second-generation cementing technique. Demographic and design-specific risk factors were analyzed using an adjusted Cox regression model. Results The 4 versions showed marked differences in 15-year stem survival with aseptic loosening as the endpoint: 94% (95% CI: 89-99) for MSS Co, 83% (CI: 75-91) for SL Co, 81% (CI: 76-87) for MSS Ti and 63% (CI: 56-71) for SL Ti. Cox regression analysis showed a relative risk (RR) for aseptic loosening of 3 (CI: 2-5) for stems made of Ti and of 2 (CI: 1-2) for the SL design. The RR for aseptic stem loosening increased to 8 (CI: 4-15) when comparing the most and the least successful designs (MSS Co and SL Ti). Interpretation Cemented Müller-type straight stems should be MSS-shaped and made of a material with high flexural strength (e.g. cobalt-chrome). The surface finish should be polished (Ra < 0.4 µm). These technical aspects combined with modern cementing techniques would improve the survival of Müller-type straight stems. This may be true for all types of cemented stems.

Long-term survival of the uncemented Balgrist total hip replacement cup

PURPOSE

The purpose of this study was to evaluate the long-term clinical and radiographic outcomes of the Balgrist total hip replacement cup.

METHODS

We report the results of a retrospective review of 195 total hip prostheses with Balgrist cup implanted in 178 patients. There were 59 men and 119 women with a mean age at surgery of 52.3 years (range, 19-72). Cox regression was used to determine the influence of independent variables on the survivorship of the prosthesis.

RESULTS

There were 117 (66 %) of 178 patients, and 131 (67 %) of 195 hips available for assessment at a mean follow-up of 17.4 years. A total of 21 patients (22 hips) were lost from follow-up (12 %). A total of 25 patients (27 hips) required some type of re-operation during the follow-up period. Eight of 27 re-operations (30 %) were directly caused by the Balgrist cup failure due to fatigue fracture of the metallic shell (n = 5; 19 %), polyethylene wear (n = 2; 7 %) and aseptic loosening (n = 1; 4 %). The mean polyethylene wear rate was 0.068 mm/year (range, 0.008-0.230; SD = 0.043). The risk of re-operation for any reason was decreased with dysplastic hip as a primary diagnosis (hazard ratio; HR = 0.250; 95 % CI 0.086-0.725) and with greater age at the time of surgery (HR = 0.923; 95 % CI 0.880-0.969). The 19-year survivorship with re-operation for any reason was 75.6 % (95 % CI 67.0-84.2). The 19-year survivorship with re-operation for the Balgrist cup failure was 90.5 % (95 % CI 83.4-97.6).

CONCLUSIONS

The Balgrist cup continues to provide excellent clinical and radiological outcomes. This is associated at least in part with a low polyethylene wear rate. The main reason for the Balgrist cup failure is fatigue fracture of the metallic shell.

Cemented versus uncemented fixation in total hip replacement: a systematic review and meta-analysis of randomized controlled trials

The optimal method of fixation for primary total hip replacements (THR), particularly fixation with or without the use of cement is still controversial. In a systematic review and metaanalysis of all randomized controlled trials comparing cemented versus uncemented THRS available in the published literature, we found that there is no significant difference between cemented and uncemented THRs in terms of implant survival as measured by the revision rate. Better short-term clinical outcome, particularly an improved pain score can be obtained with cemented fixation. However, the results are unclear for the long-term clinical and functional outcome between the two groups. No difference was evident in the mortality and the post operative complication rate. On the other hand, the radiographic findings were variable and do not seem to correlate with clinical findings as differences in the surgical technique and prosthesis design might be associated with the incidence of osteolysis. We concluded in our review that cemented THR is similar if not superior to uncemented THR, and provides better short term clinical outcomes. Further research, improved methodology and longer follow up are necessary to better define specific subgroups of patients in whom the relative benefits of cemented and uncemented implant fixation can be clearly demonstrated.

Is there evidence for accelerated polyethylene wear in uncemented compared to cemented acetabular components? A systematic review of the literature

Joint arthroplasty registries show an increased rate of aseptic loosening in uncemented acetabular components as compared to cemented acetabular components. Since loosening is associated with particulate wear debris, we postulated that uncemented acetabular components demonstrate a higher polyethylene wear rate than cemented acetabular components in total hip arthroplasty. We performed a systematic review of the peer-reviewed literature, comparing the wear rate in uncemented and cemented acetabular components in total hip arthroplasty. Studies were identified using MEDLINE (PubMed), EMBASE and the Cochrane Central Register of Controlled Trials. Study quality was assessed using the Grading of Recommendations Assessment, Development and Evaluation (GRADE) approach. The search resulted in 425 papers. After excluding duplicates and selection based on title and abstracts, nine studies were found eligible for further analysis: two randomised controlled trials, and seven observational studies. One randomised controlled trial found a higher polyethylene wear rate in uncemented acetabular components, while the other found no differences. Three out of seven observational studies showed a higher polyethylene wear in uncemented acetabular component fixation; the other four studies did not show any differences in wear rates. The available evidence suggests that a higher annual wear rate may be encountered in uncemented acetabular components as compared to cemented components.

Low revision rate after total hip arthroplasty in patients with pediatric hip diseases

BACKGROUND

The results of primary total hip arthroplasties (THAs) after pediatric hip diseases such as developmental dysplasia of the hip (DDH), slipped capital femoral epiphysis (SCFE), or Perthes' disease have been reported to be inferior to the results after primary osteoarthritis of the hip (OA).

MATERIALS AND METHODS

We compared the survival of primary THAs performed during the period 1995-2009 due to previous DDH, SCFE, Perthes' disease, or primary OA, using merged individual-based data from the Danish, Norwegian, and Swedish arthroplasty registers, called the Nordic Arthroplasty Register Association (NARA). Cox multiple regression, with adjustment for age, sex, and type of fixation of the prosthesis was used to calculate the survival of the prostheses and the relative revision risks.

RESULTS

370,630 primary THAs were reported to these national registers for 1995-2009. Of these, 14,403 THAs (3.9%) were operated due to pediatric hip diseases (3.1% for Denmark, 8.8% for Norway, and 1.9% for Sweden) and 288,435 THAs (77.8%) were operated due to OA. Unadjusted 10-year Kaplan-Meier survival of THAs after pediatric hip diseases (94.7% survival) was inferior to that after OA (96.6% survival). Consequently, an increased risk of revision for hips with a previous pediatric hip disease was seen (risk ratio (RR) 1.4, 95% CI: 1.3-1.5). However, after adjustment for differences in sex and age of the patients, and in fixation of the prostheses, no difference in survival was found (93.6% after pediatric hip diseases and 93.8% after OA) (RR 1.0, CI: 1.0-1.1). Nevertheless, during the first 6 postoperative months more revisions were reported for THAs secondary to pediatric hip diseases (RR 1.2, CI: 1.0-1.5), mainly due to there being more revisions for dislocations (RR 1.8, CI: 1.4-2.3). Comparison between the different diagnosis groups showed that the overall risk of revision after DDH was higher than after OA (RR 1.1, CI: 1.0-1.2), whereas the combined group Perthes' disease/SCFE did not have a significantly different risk of revision to that of OA (RR 0.9, CI: 0.7-1.0), but had a lower risk than after DDH (RR 0.8, CI: 0.7-1.0).

INTERPRETATION

After adjustment for differences in age, sex, and type of fixation of the prosthesis, no difference in risk of revision was found for primary THAs performed due to pediatric hip diseases and those performed due to primary OA.