Zinc oxide and zinc oxide-based nanostructures: biogenic and phytogenic synthesis, properties and applications

Ca-doped ZnO nanoparticles for MB dye degradation and adsorptive removal of tinidazole

Industrial dye degradation involves several processes by which dyes are broken down, ideally into innocuous products. Methylene blue (MB) is one of the most commonly employed dyes in the textile industry and is released into water in routine industry processes. These discharges lead to creating a nocuous nature for humans and animals. Drugs are also discharged into water bodies from various pharmaceutical industries. In these two contexts, in the present work, the green synthesis of calcium-doped zinc oxide nanoparticles (Ca-doped ZnO NPs) is achieved using the aqueous peel extract of Citrus limetta by the solution combustion technique. The structural, morphological, and optical properties of the synthesized Ca-doped ZnO NPs are investigated using XRD, FTIR, SEM, EDX, and UV-visible spectroscopy. The prepared NPs were subjected to photocatalytic degradation of MB dye under visible-light illumination, which shows ~ 95% dye degradation. The synthesized Ca-doped ZnO NPs were also employed to adsorb tinidazole (TDZ), a nitroimidazole antibiotic, from water samples. An excellent adsorptive capacity of the NPs was observed for selectively adsorbing the TDZ ~ 96.2%. The drug TDZ was found to have pseudo-second-order kinetics. The catalyst recycling proved its repeatability; removal of the dye reached up to 92% after three successive usages. Therefore, using waste Citrus limetta peel extract, the multifunctional Ca-doped ZnO NPs were synthesized, which maintained effective adsorption potential and photocatalytic abilities and could be used as an effective material for environmental remediation.

Application of machine learning models to improve the prediction of pesticide photodegradation in water by ZnO-based photocatalysts

Pesticide pollution has been posing a significant risk to human and ecosystems, and photocatalysis is widely applied for the degradation of pesticides. Machine learning (ML) emerges as a powerful method for modeling complex water treatment processes. For the first time, this study developed novel ML models that improved the estimation of the photocatalytic degradation of various pesticides using ZnO-based photocatalysts. The input parameters encompassed the source of light, mass proportion of dopants to Zn, initial pesticide concentration (C0), pH of the solution, and irradiation time. Notably, the numerical data were extracted from the literature via relevant tables (directly) or graphs (indirectly) using the web-based tool WebPlotDigitizer. Additionally, physicochemical properties such as the molecular weight of the dopants and pesticides, as well as the water solubility of both dopants and pesticides, were considered. Four ML models including multi-layer perceptron artificial neural network (MLP-ANN), particle swarm optimization-adaptive neuro fuzzy inference system (PSO-ANFIS), radial basis function (RBF), and coupled simulated annealing-least squares support vector machine (CSA-LSSVM) were developed. In comparison, RBF showed the best accuracy of modeling among all models, with the highest determination coefficient (R2) of 0.978 and average absolute relative deviation (AARD) of 4.80%. RBF model was effective in estimating the photocatalytic degradation of pesticides except for 2-chlorophenol, triclopyr and lambda-cyhalothrin, where CSA-LSSVM model demonstrated superior performance. Dichlorvos was completely degraded by ZnO photocatalyst under visible light. The sensitivity analysis by relevancy factor exhibited that light irradiation time and initial pesticide concentration were the most important parameters influencing photocatalytic degradation of pesticides positively and negatively, respectively. The new ML models provide a powerful tool for predicting pesticide degradation in wastewater treatment, which will reduce photochemical experiments and promote sustainable development.

Sustainable fabrication of dimorphic plant derived ZnO nanoparticles and exploration of their biomedical and environmental potentialities

Although, different plant species were utilized for the fabrication of polymorphic, hexagonal, spherical, and nanoflower ZnO NPs with various diameters, few studies succeeded in synthesizing small diameter ZnO nanorods from plant extract at ambient temperature. This work sought to pioneer the ZnO NPs fabrication from the aqueous extract of a Mediterranean salt marsh plant species Limoniastrum monopetalum (L.) Boiss. and assess the role of temperature in the fabrication process. Various techniques have been used to evaluate the quality and physicochemical characteristics of ZnO NPs. Ultraviolet-visible spectroscopy (UV-VIS) was used as the primary test for formation confirmation. TEM analysis confirmed the formation of two different shapes of ZnO NPs, nano-rods and near hexagonal NPs at varying reaction temperatures. The nano-rods were about 25.3 and 297.9 nm in diameter and in length, respectively while hexagonal NPs were about 29.3 nm. The UV-VIS absorption spectra of the two forms of ZnO NPs produced were 370 and 365 nm for nano-rods and hexagonal NPs, respectively. FT-IR analysis showed Zn-O stretching at 642 cm-1 and XRD confirmed the crystalline structure of the produced ZnO NPs. Thermogravimetric analysis; TGA was also used to confirm the thermal stability of ZnO NPs. The anti-tumor activities of the two prepared ZnO NPs forms were investigated by the MTT assay, which revealed an effective dose-dependent cytotoxic effect on A-431 cell lines. Both forms displayed considerable antioxidant potential, particularly the rod-shaped ZnO NPs, with an IC50 of 148.43 µg mL-1. The rod-shaped ZnO NPs were superior candidates for destroying skin cancer, with IC50 of 93.88 ± 1 µg mL-1 ZnO NPs. Thus, rod-shaped ZnO NPs are promising, highly biocompatible candidate for biological and biomedical applications. Furthermore, both shapes of phyto-synthesized NPs demonstrated effective antimicrobial activity against various pathogens. The outcomes highlight the potential of phyto-synthesized ZnO NPs as an eco-friendly alternative for water and wastewater disinfection.

Green synthesis of zinc oxide nanoparticles from Sida acuta leaf extract for antibacterial and antioxidant applications, and catalytic degradation of dye through the use of convolutional neural network

This study synthesized zinc oxide nanoparticles (ZnO NPs) using a novel green approach, with Sida acuta leaf extract as a capping and reducing agent to initiate nucleation and structure formation. The innovation of this study lies in demonstrating the originality of utilizing zinc oxide nanoparticles for antibacterial action, antioxidant potential, and catalytic degradation of Congo red dye. This unique approach harnesses eco-friendly methods to initiate nucleation and structure formation. The synthesized nanoparticles' structure and conformation were characterized using UV-vis (λmax = 280 nm), X-ray, atomic force microscopy, SEM, HR-TEM and FTIR. The antibacterial activity of the Nps was tested against Pseudomonas sp, Klebsiella sp, Staphylococcus aureus, and E. coli, demonstrating efficacy. The nanoparticles exhibited unique properties, with a crystallite size of 20 nm (XRD), a surface roughness of 2.5 nm (AFM), and a specific surface area of 60 m2/g (SEM). A Convolutional Neural Network (CNN) was effectively employed to accurately classify and analyze microscopic images of green-synthesized zinc oxide nanoparticles. This research revealed their exceptional antioxidant potential, with an average DPPH scavenging rate of 80% at a concentration of 0.05 mg/mL. Additionally, zeta potential measurements indicated a stable net negative surface charge of approximately -12.2 mV. These quantitative findings highlight the promising applications of green-synthesized ZnO NPs in healthcare, materials science, and environmental remediation. The ZnO nanoparticles exhibited catalytic capabilities for dye degradation, and the degradation rate was determined using UV spectroscopy. Key findings of the study encompass the green synthesis of versatile zinc oxide nanoparticles, demonstrating potent antibacterial action, antioxidant capabilities, and catalytic dye degradation potential. These nanoparticles offer multifaceted solutions with minimal environmental impact, addressing challenges in various fields, from healthcare to environmental remediation.

Psidium guajava-mediated green synthesis of Fe-doped ZnO and Co-doped ZnO nanoparticles: a comprehensive study on characterization and biological applications

The efficacy of nanoparticles (NPs) in healthcare applications hinges on their biocidal activity and biocompatibility. This research is dedicated to green-synthesized NPs with potent biocidal properties, aiming for high inhibition rates in bacterial infections and offering a multifunctional application, including potential use in anticancer therapy, in comparison to traditional antibiotics. The present study focuses on synthesis of zinc oxide (ZnO) nanoparticles (NPs), including iron-doped ZnO (GZF) and cobalt-doped ZnO (GZC), using the green co-precipitation method involving Psidium guajava (P. guajava) leaf extract. The physicochemical properties of the synthesized NPs were analyzed using various characterization techniques. The antibacterial and anticancer activity depends on the generation of reactive oxygen species (ROS), particle size, surface area, oxygen vacancy, Zn2+ release, and diffusion ability. The antibacterial activity of the synthesized NPs was tested against various Gram-positive (Streptococcus pneumoniae (S. pneumoniae), Bacillus subtilis (B. subtilis) and Gram-negative (Klebsiella pneumoniae (K. pneumoniae), and Pseudomonas aeruginosa (P. aeruginosa) bacterial strains. The zone of inhibition showed higher activity of GZC (18-20 mm) compared to GZF (16-19 mm) and GZO (11-15 mm) NPs. Moreover, anticancer studies against blood cancer cell line (MOLT-4) showed half-maximal inhibitory concentration of 11.3 μg/mL for GZC compared to GZF and GZO NPs with 12.1 μg/mL and 12.5 μg/mL, respectively. Cytotoxicity assessments carried out on the fibroblast L929 cell line indicated that GZO, GZF, and GZC NPs demonstrated cell viabilities of 85.43%, 86.66%, and 88.14%, respectively. Thus, green-synthesized GZC NPs hold promise as multifunctional agents in the biomedical sector.

Recent advancements in sustainable synthesis of zinc oxide nanoparticles using various plant extracts for environmental remediation

The sustainable synthesis of zinc oxide nanoparticles (ZnO-NPs) using plant extracts has gained significant attention in recent years due to its eco-friendly nature and potential applications in numerous fields. This synthetic approach reduces the reliance on non-renewable resources and eliminates the need for hazardous chemicals, minimizing environmental pollution and human health risks. These ZnO-NPs can be used in environmental remediation applications, such as wastewater treatment or soil remediation, effectively removing pollutants and improving overall ecosystem health. These NPs possess a high surface area and band gap of 3.2 eV, can produce both OH° (hydroxide) and O2-° (superoxide) radicals for the generation of holes (h+) and electrons (e-), resulting in oxidation and reduction of the pollutants in their valence band (VB) and conduction band (CB) resulting in degradation of dyes (95-100% degradation of MB, MO, and RhB dyes), reduction and removal of heavy metal ions (Cu2+, Pb2+, Cr6+, etc.), degradation of pharmaceutical compounds (paracetamol, urea, fluoroquinolone (ciprofloxacin)) using photocatalysis. Here, we review an overview of various plant extracts used for the green synthesis of ZnO NPs and their potential applications in environmental remediation including photocatalysis, adsorption, and heavy metal remediation. This review summarizes the most recent studies and further research perspectives to explore their applications in various fields.

Biofabrication of Mg-doped ZnO nanostructures for hemolysis and antibacterial properties

The aim of this work was to synthesize 0.02 and 0.06 Mg-doped ZnO nanoparticles (NPs) using the aqueous extract of Plectranthus barbatus leaf. The structural integrity of the hexagonal phase was emphasized by X-ray diffraction analysis. The average crystallite size (D) of 0.02 and 0.06 Mg-doped ZnO NPs was found to be 23.83 and 26.95 nm, respectively. The scanning electron microscope images revealed a surface morphology of irregular nano-shapes of about 83 nm diameter with an elongated one-dimensional structure. The hemolysis activity demonstrated the safe nature of the synthesized materials at low doses. Antibacterial activity against S. aureus and E. coli, which assessed using the disc diffusion method, indicated that the prepared NPs could inhibit S. aureus but not E. coli. These findings suggest that the synthesized NPs could be explored for potential applications in biotechnology and medicine.

Recent advances in the synthesis, characterization and biomedical applications of zinc oxide nanoparticles

Zinc oxide nanoparticles (ZnONPs) have become the widely used metal oxide nanoparticles and drawn the interest of global researchers due to their biocompatibility, low toxicity, sustainability and cost-effective properties. Due to their unique optical and chemical properties, it emerges as a potential candidate in the fields of optical, electrical, food packaging and biomedical applications. Biological methods using green or natural routes are more environmentally friendly, simple and less use of hazardous techniques than chemical and/or physical methods in the long run. In addition, ZnONPs are less harmful and biodegradable while having the ability to greatly boost pharmacophore bioactivity. They play an important role in cell apoptosis because they enhance the generation of reactive oxygen species (ROS) and release zinc ions (Zn2+), causing cell death. Furthermore, these ZnONPs work well in conjunction with components that aid in wound healing and biosensing to track minute amounts of biomarkers connected to a variety of illnesses. Overall, the present review discusses the synthesis and most recent developments of ZnONPs from green sources including leaves, stems, bark, roots, fruits, flowers, bacteria, fungi, algae and protein, as well as put lights on their biomedical applications such as antimicrobial, antioxidant, antidiabetic, anticancer, anti-inflammatory, antiviral, wound healing, and drug delivery, and modes of action associated. Finally, the future perspectives of biosynthesized ZnONPs in research and biomedical applications are discussed.

Antibacterial, antifungal, and antioxidant competence of Cardiospermum halicacabum based nanoemulsion and characterized their physicochemical properties

This research was designed to evaluate the pharmaceutical potentials of various proportions of nanoemulsions, Cardiospermum halicacabum Nanoemulsion A and Cardiospermum halicacabum Nanoemulsion B (CHE-NE-A & CHE-NE-B) prepared from the hydroalcoholic extract of Cardiospermum halicacabum through in vitro approach, and their physicochemical properties were characterized using standard scientific analytical techniques. The physicochemical and morphological properties of CHE-NE-A and CHE-NE-B were characterized by FTIR, SEM, TEM, zeta potential, and scattering light intensity analyses. The results revealed that the size, shape, and exterior conditions of nano-droplets of the CHE-NE-A nanoemulsion were suitable as a drug carrier. The reports obtained from in vitro drug releasing potential analysis support this as well. CHE-NE-A nanoemulsion constantly removes the drug from the dialysis bag than CHE-NE-B. Moreover, the CHE-NE-A showed considerable dose-dependent antioxidant activity on DPPH, ABTS, and FRAP free radicals. CHE-NE-A and CHE-NE-B were tested for their antibacterial activity with various bacterial strains. The results demonstrated that the CHE-NE-A nanoemulsion showed remarkable antibacterial activity (zone of inhibition) against test bacterial pathogens than CHE-NE-B. The antibacterial activity of CHE-NE-A at a concentration of 200 µg mL-1was in the following order, P. aeruginosa > S. aureus > S. typhimurium > S. pneumoniae > E. coli. Furthermore, CHE-NE-A has the lowest MIC values against these test bacterial pathogens than CHE-NE-B. Moreover, the CHE-NE-A also demonstrated good antifungal activity against the test fungal pathogens such as Cryptococcus neoformans, Aspergillus niger, Candida pneumonia, and Penicillium expansum than CHE-NE-B. These results strongly suggest that the CHE-NE-A nanoemulsion possesses considerable pharmaceutical potential. Interestingly, the physicochemical properties also rope that the CHE-NE-A nanoemulsion may be considered a drug carrier and useful for drug formulation.

Restorative effects of gallic acid against sub-chronic hepatic toxicity of co-exposure to zinc oxide nanoparticles and arsenic trioxide in male rats

Background and objectives

This study aimed to assess the effect of zinc oxide nanoparticles (ZNPs) and/or arsenic trioxide (ATO) exposure on the liver of adult male Sprague Dawley rats. Moreover, the probable ameliorative impact of gallic acid (GA) against ZNPs and ATO-induced hepatotoxicity and the possible underlying mechanisms were evaluated.

Methods

Sixty male Sprague Dawley rats were distributed into six groups. The 1^st and 2^nd groups were orally given distilled water (1 ml/kg) and 20 mg GA/kg b. wt, respectively. The 3^rd and 4^th groups were orally given 100 mg ZNPs/kg b. wt and 8 mg ATO/kg b. wt, respectively. The 5^th group was co-administered ZNPs and ATO at the doses mentioned above. The last one was co-administered ZNPs, ATO, and GA at the earlier described doses. All tested compounds were orally given once a day for 60 successive days. Then, serum levels of alkaline phosphatase (ALP), alanine aminotransferase (ALT), aspartate aminotransferase (AST), total, direct, indirect bilirubin, triglycerides, total cholesterol, HDL, VLDL, and LDL were estimated. The hepatic content of malondialdehyde (MDA), superoxide dismutase (SOD), and glutathione peroxidase (GPx) was evaluated. Moreover, Bcl-2 and Bax's reactive proteins were immunohistochemically detected, and Zn and As residual patterns in hepatic tissues were assessed.

Results

ZNPs, ATO, and ZNPs+ATO-exposed rats showed significantly (P < 0.001) elevated serum AST (219%, 233%, and 333%), ALT (300%, 400%, and 475%), ALP (169%, 205%, and 294%), and total bilirubin (42%, 68%, and 109%) compared to the control ones. On the other hand, a significantly (P < 0.001) declined SOD (58%, 49%, and 43%) and GPx (70%, 63%, and 56%) but increased MDA (133%, 150%, and 224%) was recorded in the hepatic tissues of ZNPs, ATO, and ZNPs+ATO exposed rats, respectively, relative to the control rats. Moreover, the hepatic tissues of the ZNPs, ATO, and ZNPs+ATO exposed rats showed a significant (P < 0.001) decrease in Bcl-2 (28%, 33%, and 23%) but elevation in Bax (217%, 267%, and 236%) immunoreactivities compared to the control rats. These findings were consistent with the microscopic alterations in the hepatic architecture and accumulation of Zn and As. Furthermore, a notable hyperlipidemic condition was recorded following ZNPs and/or ATO exposure. On the contrary, GA notably reduced hepatic enzymes compared to ZNPs+ATO-exposed rats. Additionally, GA markedly improved ZNPs+ATO-afforded liver tissue damage and apoptotic events.

Conclusion

Overall, GA oral dosing significantly mitigated the negative effects of ZNPs and ATO on the liver by improving the antioxidant defense system and controlling apoptotic changes.

Sonophotocatalytic Degradation of Fast Yellow AB and Remazol Brilliant Violet-5R by Using Ag-Impregnated ZnO as a Photocatalyst

The fundamental aim of this project was to assess the sonophotocatalytic degradation of textile dyes mostly eluted from industries into wastewater. Such a pretreatment of wastewater makes the water suitable for drinking and irrigation purposes and thereby helps protect the ecosystem. The main objective of this research was to degrade real samples and laboratory-prepared samples sonophotocatalytically using a silver-impregnated ZnO photocatalyst. Reactive dyes, including Fast Yellow AB (FY AB) and Remazol Brilliant Violet-5R (RBV-5R), were degraded via this technique under optimum and enhanced conditions. The photocatalyst was synthesized through a wet impregnation process and characterized by scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) analysis, Fourier transform infrared (FTIR) spectroscopy, and UV/vis spectroscopy to examine the morphology, composition, and functional groups of the photocatalyst. Parameters including pH, dosage, dye concentration, scavengers, and effects of oxidizing agents were considered. Under optimal conditions, the degradations were 95.7 and 88.9% for RBV-5R and FY AB, respectively, in 60 min. The pH and oxidizing agents played important roles in the degradation process. Only 43.8 and 32.5% of RBV-5R and FY AB, respectively, were degraded in the absence of an oxidizing agent. With the addition of oxidizing agents, 95.7 and 88.9% of RBV-5R and FY AB degradation occurred, respectively. The optimal pH values for RBV 5-R and FY-AB were 8 and 12, respectively. A comparison between the photocatalytic and sonophotocatalytic processes revealed degradation efficiencies of 41 and 33% for RBV-5R and FY-AB, respectively, by the photocatalytic process. Therefore, results indicate the productivity of the sonophotocatalytic degradation process.

Colloidal Approaches to Zinc Oxide Nanocrystals

Zinc oxide is an extensively studied semiconductor with a wide band gap in the near-UV. Its many interesting properties have found use in optics, electronics, catalysis, sensing, as well as biomedicine and microbiology. In the nanoscale regime the functional properties of ZnO can be precisely tuned by manipulating its size, shape, chemical composition (doping), and surface states. In this review, we focus on the colloidal synthesis of ZnO nanocrystals (NCs) and provide a critical analysis of the synthetic methods currently available for preparing ZnO colloids. First, we outline key thermodynamic considerations for the nucleation and growth of colloidal nanoparticles, including an analysis of different reaction methodologies and of the role of dopant ions on nanoparticle formation. We then comprehensively review and discuss the literature on ZnO NC systems, including reactions in polar solvents that traditionally occur at low temperatures upon addition of a base, and high temperature reactions in organic, nonpolar solvents. A specific section is dedicated to doped NCs, highlighting both synthetic aspects and structure-property relationships. The versatility of these methods to achieve morphological and compositional control in ZnO is explicated. We then showcase some of the key applications of ZnO NCs, both as suspended colloids and as deposited coatings on supporting substrates. Finally, a critical analysis of the current state of the art for ZnO colloidal NCs is presented along with existing challenges and future directions for the field.

Application and mechanisms of metal-based nanoparticles in the control of bacterial and fungal crop diseases

Nanotechnology is a young branch of the discipline generated by nanomaterials. Its development has greatly contributed to technological progress and product innovation in the field of agriculture. The antimicrobial properties of nanoparticles (NPs) can be used to develop nanopesticides for plant protection. Plant diseases caused by bacterial and fungal infestations are the main types of crop diseases. Once infected, they will seriously threaten crop growth, reduce yield and quality, and affect food safety, posing a health risk to humans. We reviewed the application of metal-based nanoparticles in inhibiting plant pathogenic bacteria and fungi, and discuss the antibacterial mechanisms of metal-based nanoparticles from two aspects: the direct interaction between nanoparticles and pathogens, and the indirect effects of inducing plant resilience to disease. © 2022 Society of Chemical Industry.

Bryophyllum pinnatum leaf extract mediated ZnO nanoparticles with prodigious potential for solar driven photocatalytic degradation of industrial contaminants

In an era of environment-friendly development plant extract-based biological techniques for synthesizing nanoparticles have gained a lot of attention over traditionally famous chemical and physical synthesis techniques. In the present study we have synthesized biogenic zinc oxide nanoparticles (BPLE-ZnO NPs) using Bryophyllum pinnatum leaf extract, compared its native properties and solar-driven photocatalytic activity with chemically prepared ZnO nanoparticles (Chem-ZnO NPs). In order to characterize and compare the Chem-ZnO and BPLE-ZnO, various techniques were used, including UV-visible spectroscopy, x-ray diffractrometry, photoluminescence spectroscopy, field emission scanning electron microscopy, electron dispersive x-ray spectroscopy, fourier transform infrared spectroscopy, and zeta potential analyzer. The results revealed the formation of hexagonal wurtzite ZnO, with no significant difference between the two methods; however, the use of Bryophyllum pinnatum leaf extract in ZnO NPs synthesis resulted in reduced size, presence of biomolecules on its surface and better monodispersity than purely chemical synthesis. Further, the BPLE-ZnO NPs showed better efficiency in the solar-driven photocatalytic degradation of methylene blue (MB) dye compared to Chem-ZnO NPs. Under solar exposure at a dose of 0.50 mg/mL BPLE-ZnO, resulted in 97.31% photodegradation with a rate constant of 0.06 min-1 of 20 mg/L MB solution within just 60 min which was 9.51% higher compared to the Chem-ZnO NPs. The BPLE-ZnO NPs were also employed to investigate their solar-driven photocatalytic performance for degrading the pharmaceutical (Metronidazole and Amoxycillin) and textile pollutants (Methyl orange dye) under sunlight. The results show that Bryophyllum pinnatum leaf extract-mediated ZnO NPs have an excellent potential in solar-based photocatalytic applications.

ZnO recovered from spent alkaline batteries as antimicrobial additive for waterborne paints

Biocides are employed to prevent biodeterioration in waterborne paints. In the present study, we used zinc oxide nanoparticles (obtained from spent alkaline batteries) as biocide for indoor waterborne paint at 1.5% of the total solid content in paint. Two different zinc oxides synthesized from spent alkaline batteries, which showed photocatalyst activity, were employed as an antimicrobial agents. After leaching the anode of alkaline batteries, zinc was precipitated from the leachate liquor by introducing oxalic acid (O-ZnO) or sodium carbonate (C-ZnO). The antimicrobial properties of the prepared oxides were tested against Staphylococcus aureus (bacteria), Chaetomium globosum, and Aspergillus fumigatus (fungi) using agar well diffusion method. C-ZnO inhibited the growth of all the strains studied and presented enhanced activity than O-ZnO. The better performance as antimicrobial agent of C-ZnO compared to O-ZnO was attributed to its lower crystallite size, higher amount of oxygen monovacancies, and to its lower band gap energy. The oxide with the best performance in antimicrobial activity, C-ZnO, was employed for the formulation of waterborne acrylic paints. It was observed that 1.5% C-ZnO improved the antifungal properties and antibacterial properties compared to the control sample.

Chalcogenides and Chalcogenide-Based Heterostructures as Photocatalysts for Water Splitting

Chalcogenides are essential in the conversion of solar energy into hydrogen fuel due to their narrow band gap energy. Hydrogen fuel could resolve future energy crises by substituting carbon fuels owing to zero-emission carbon-free gas and its eco-friendliness. The fabrication of different metal chalcogenide-based photocatalysts with enhanced photocatalytic water splitting have been summarized in this review. Different modifications of these chalcogenides, including coupling with another semiconductor, metal loading, and doping, are fabricated with different synthetic routes that can remarkably improve the photo-exciton separation and have been extensively investigated for photocatalytic hydrogen generation. In this direction, this review is undertaken to provide an overview of the enhanced photocatalytic performance of the binary and ternary chalcogenide heterostructures and their mechanisms for hydrogen production under irradiation of light.

Green synthesis of metronidazole or clindamycin-loaded hexagonal zinc oxide nanoparticles from Ziziphus extracts and its antibacterial activity

Green chemistry has become a fruitful approach for the synthesis of semiconductors and nanoparticles with various applications. Herein, we synthesized ZnO hexagonal nanoparticles (HNPs) by green precipitation method using fresh local Ziziphus leaf extract (Rhamnaceae) with a heating range of 60–80 in an alkaline medium. It was calcinated on a furnace at 500 °C for 2 h. to get a very fine and homogeneous pale-yellow powder which is then loaded with either metronidazole or clindamycin. The physical characterizations of the particles’ morphology, size, and purity were measured using the Scanning electron microscope, UV-spectroscopy, and the Fourier transform infrared spectroscope. The size of ZnO nanoparticles (44.63 nm) was measured using scanning electron microscopy (SEM), and the mean crystal size of the precursor (17.37 nm) was measured using X-ray diffraction methods (XRD). The antibacterial activity of these particles was measured against Staphylococcus aureus bacterial strains and analyzed using a “well-diffusion technique” which revealed that metronidazole or clindamycin-containing ZnO nanoparticles showed good bactericidal activity.

Keywords

Recent Progress of Metal-Organic Frameworks and Metal-Organic Frameworks-Based Heterostructures as Photocatalysts

In the field of photocatalysis, metal-organic frameworks (MOFs) have drawn a lot of attention. MOFs have a number of advantages over conventional semiconductors, including high specific surface area, large number of active sites, and an easily tunable porous structure. In this perspective review, different synthesis methods used to prepare MOFs and MOFs-based heterostructures have been discussed. Apart from this, the application of MOFs and MOFs-based heterostructures as photocatalysts for photocatalytic degradation of different types of pollutants have been compiled. This paper also highlights the different strategies that have been developed to modify and regulate pristine MOFs for improved photocatalytic performance. The MOFs modifications may result in better visible light absorption, effective photo-generated charge carriers (e^-/h⁺), separation and transfer as well as improved recyclability. Despite that, there are still many obstacles and challenges that need to be addressed. In order to meet the requirements of using MOFs and MOFs-based heterostructures in photocatalysis for low-cost practical applications, future development and prospects have also been discussed.

Acacia nilotica Pods’ Extract Assisted-Hydrothermal Synthesis and Characterization of ZnO-CuO Nanocomposites

This work represents a novel combination between Acacia nilotica pods’ extract and the hydrothermal method to prepare nanoparticles of pure zinc oxide and pure copper oxide and nanocomposites of both oxides in different ratios. Five samples were prepared with different ratios of zinc oxide and copper oxide; 100% ZnO (ZC0), 75% ZnO: 25% CuO (ZC25), 50% ZnO: 50% CuO (ZC50), 25% ZnO: 75% CuO (ZC75), and 100% CuO (ZC100). Several techniques have been applied to characterize the prepared powders as FTIR, XRD, SEM, and TEM. The XRD results confirm the formation of the hexagonal wurtzite phase of zinc oxide and the monoclinic tenorite phase of copper oxide. The microscopy results show the formation of a heterostructure of nanocomposites with an average particle size of 13–27 nm.

Recent progress of phytogenic synthesis of ZnO, SnO2, and CeO2 nanomaterials

A critical investigation on the fabrication of metal oxide nanoparticles (NPs) such as ZnO, SnO₂, and CeO₂ NPs synthesized from green and phytogenic method using plants and various plant parts have been compiled. In this review, different plant extraction methods, synthesis methods, characterization techniques, effects of plant extract on the physical, chemical, and optical properties of green synthesized ZnO, SnO₂, and CeO₂ NPs also have been compiled and discussed. Effect of several parameters on the size, morphology, and optical band gap energy of metal oxide have been explored. Moreover, the role of solvents has been found important and discussed. Extract composition i.e. phytochemicals also found to affect the morphology and size of the synthesized ZnO, SnO₂, and CeO₂ NPs. It was found that, there is no universal extraction method that is ideal and extraction techniques is unique to the plant type, plant parts, and solvent used.

Mixed-Valence Bimetallic Ce/Zr MOF-Based Nanoarchitecture: A Visible-Light-Active Photocatalyst for Ciprofloxacin Degradation and Hydrogen Evolution

A mixed-valency bimetallic Ce/Zr MOF with Ce³⁺/Ce⁴⁺ ions incorporated and an oxygen vacancy-rich single-component photocatalyst have been designed through the one-step solvothermal route to harness photons from the visible-light spectrum for green energy (H₂) generation and ciprofloxacin (CIP) degradation. The one-pot-engineered bimetallic Ce/Zr MOF shows visible-light-active characteristics accompanied by a narrower band gap, along with enhanced exciton separation and superior ligand-to-metal charge transfer (LMCT), due to the presence of an interconvertible Ce³⁺/Ce⁴⁺ ions pair in comparison to its pristine MOF counterpart. The Ce ion insertion led to increase in electron density around the Zr⁴⁺ ion, along with generation of some oxygen vacancies (OV), which cumulatively led to the rise in the photo-reaction output. The synthesized UNH (Ce/Zr 1:1) MOF displayed a boosted photocatalytic H₂ production rate of 468.30 μmol h^-1 (ACE = 3.51%), which is around fourfolds higher than that of pristine MOFs. Moreover, for CIP photodegradation, the UNH (Ce/Zr 1:1) shows an enhanced efficiency of 90.8% and follows pseudo-first-order kinetics with a rate constant of 0.0363. Typically, the active species involved in the photo-redox reaction of the CIP photodegradation follows the order hydroxyl radical (OH^•) < superoxide radical (O₂^•-), as confirmed by the TA and NBT tests. Consequently, the bimetallic Ce/Zr MOF can be readily employed as a robust photocatalyst with enhanced tendencies towards CIP degradation and H₂ evolution.

Effect of Zr doping on photoantioxidant and antibiofilm properties of CeO2 NPs fabricated using aqueous leaf extract of Pometia pinnata

Synthesized cerium oxide nanoparticles (S-CeO₂ NPs) and 1%, 5% and 10% zirconium doped CeO₂ (Zr-doped CeO₂) NPs were fabricated using aqueous leaf extract of Pometia pinnata. The synthesized NPs were characterized using standard techniques which confirmed successful synthesis of NPs with particle size ranging from 12 to 23 nm and band gap energy of 2.54-2.66 eV. Photoantioxidant activities showed enhanced activities under visible light irradiation in comparison to the dark condition in the dose-dependent study. Biofilm inhibition studies showed ~ 73% biofilm inhibition of Staphylococcus aureus at 512 µg/mL for S-CeO₂, whereas 10% Zr-doped CeO₂ NPs showed biofilm inhibition of 52.7%. The bactericidal tests showed killing properties at 1024 µg/mL of S-CeO₂ NPs and at 512 µg/mL of 1% Zr-doped CeO₂. Reduced bactericidal activities were observed for 5% and 10% Zr-doped CeO₂. These studies showed that the fabricated NPs have both good photoantioxidant and antibacterial properties.

Green-synthesized CeO2 nanoparticles for photocatalytic, antimicrobial, antioxidant and cytotoxicity activities

Cerium oxide nanoparticles (CeO2 NPs) are a sought-after material in numerous fields due to their potential applications such as in catalysis, cancer therapy, photocatalytic degradation of pollutants, sensors, polishing agents. Green synthesis usually involves the production of CeO2 assisted by organic extracts obtained from plants, leaves, flowers, bacteria, algae, food, fruits, etc. The phytochemicals present in the organic extracts adhere to the NPs and act as reducing and/or oxidizing agents and capping agents to stabilize the NPs, modify the particle size, morphology and band gap energy of the as-synthesized materials, which would be advantageous for numerous applications. This review focuses on the green extract-mediated synthesis of CeO2 NPs and discusses the effects on CeO2 NPs of various synthesis methods that have been reported. Several photocatalytic, antimicrobial, antioxidant and cytotoxicity applications have been evaluated, compared and discussed. Future prospects are also suggested.

Suppression of hyphal formation and virulence of Candida albicans by natural and synthetic compounds

Candida albicans undergoes a morphological yeast-to-hyphal transition during infection, which plays a significant role in its pathogenesis. The filamentous morphology of the hyphal form has been identified as a virulence factor as it facilitates surface adherence, intertwining with biofilm, invasion, and damage to host tissues and organs. Hence, inhibition of filamentation in addition to biofilm formation is considered a viable strategy against C. albicans infections. Furthermore, a good understanding of the signaling pathways involved in response to environmental cues driving hyphal growth is also critical to an understanding of C. albicans pathogenicity and to develop novel therapies. In this review, first the clinical significance and transcriptional control of C. albicans hyphal morphogenesis are addressed. Then, various strategies employed to suppress filamentation, prevent biofilm formation, and reduce virulence are discussed. These strategies include the inhibition of C. albicans filament formation using natural or synthetic compounds, and their combination with other agents or nanoformulations.

Chalcogenides as photocatalysts

Chalcogenides and chalcogenide-based heterostructures as photocatalysts.