A magnetic MoS2-Fe3O4 nanocomposite as an effective adsorbent for dispersive solid-phase microextraction of lead(II) and copper(II) prior to their determination by FAAS

A new approach for the determination of As, Cu, and Pb in seawater samples using manganese oxide octahedral molecular sieve as a sorbent for dispersive solid-phase microextraction

This study introduces a novel method for preconcentrating As, Cu, and Pb from seawater samples using manganese oxide octahedral molecular sieve (OMS-2), as a sorbent, and the analysis by Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES). The OMS-2 nanomaterial was synthesized and characterized using X-ray diffraction and scanning electron microscopy, revealing a crystallite size of 20.9 nm and a typical needle-like morphology of cryptomelane structure. To optimize the ICP-OES operating conditions and the preconcentration process, a central composite design was used. The optimal conditions for ICP-OES analyses were 1200 W and 0.7 L min-1 for the levels of the radio frequency potential (RF) and nebulization gas flow rate, respectively. The optimal conditions for the adsorption process were achieved at a pH of 6.5, 30 mg of OMS-2, and 35 min of stirring time, in the presence of the sample matrix. The enrichment factors obtained were 66, 45, and 21, and a limit of detection of 0.3, 0.1, and 2.1 μg L-1 for As, Cu, and Pb, respectively. The recovery tests ranged from 80 % to 120 %. The method was successfully applied to determine As, Cu, and Pb in seawater samples.

Use of transition metal dichalcogenides (TMDs) in analytical sample preparation applications

Since the discovery of graphene, nano-sized two-dimensional (2D) transition metal dichalcogenides (TMDs) such as MoS2, MoSe2, MoTe2, NbS2, NbSe2, WS2, WSe2, TaS2 and TaSe2, which have been classified as next-generation nanomaterials resembling graphene (G) have complementary basic properties with those of graphene in terms of their practical applications. TMDs are attracting great attention due to their attractive physical, chemical and electronic properties. Despite being overshadowed by graphene in terms of frequency of use, TMDs have been used frequently in many areas in recent years instead of carbon-based materials such as graphene (G), graphene oxide (GO), carbon nanotubes (CNTs) and nanodiamonds (NDs). It is seen that the first and frequent uses of TMDs, which are classified as new generation materials, are in the fields of catalysis, electronic applications, hydrogen production processes and energy storage, but it has been used as an adsorbent in sample preparation techniques in recent years. Similar to graphene, layers of TMDs are held together by weak van der Waals interactions. The sandwiched layers of TMDs provide sufficient and effective interlayer spaces so that foreign molecules, ions and atoms can easily enter these spaces between the layers. Intermolecular interactions increase with the entry of different materials into these spaces, and thus, high activity, adsorption capacity and efficiency are obtained in adsorption-based analytical sample preparation methods. Although there are about 35 research articles using TMDs, which are classified as promising materials in analytical sample preparation techniques, no review studies have been found. This review, which was designed with this awareness, contains important informations on the properties of metal dichalcogenides, their production methods and their use in analytical sample preparation techniques.

Development of a New Sensitive Method for Lead Determination by Platinum-Coated Tungsten-Coil Hydride Generation Atomic Absorption Spectrometry

A novel very sensitive and rapid analytical method was improved where gaseous lead formed was transported to and trapped on an externally heated platinum-coated tungsten-coil atom trap for in situ preconcentration. The analytical performance of the developed method with the graphite furnace atomic absorption spectrometry (GFAAS) method was compared. All critical parameters affecting the performance of both methods were optimized. The limit of quantitation (LOQ) was found as 11.0 ng L^-1 and the precision was 2.3% in terms of percent relative standard deviation (RSD%). Characteristic concentration (Co) of the developed trap method was indicating a 32.5-fold enhancement in sensitivity compared to the GFAAS method. In order to investigate the surface morphology of the W-coil, scanning electron microscope-energy-dispersive X-ray (SEM-EDS) analyzes were performed. The accuracy of the trap method was tested by certified reference materials: NIST SRM 1640a (the elements in natural water) and DOLT:5 (dogfish liver). Interferences from other hydride-forming elements were investigated. Application of the trap method was demonstrated by the analysis of some drinking water and fish tissue samples. The t test was applied to drinking water samples, and the results indicated that there was no statistically significant error.

MRI Tracking of Marine Proliferating Cells In Vivo Using Anti-Oct4 Antibody-Conjugated Iron Nanoparticles for Precision in Regenerative Medicine

Marine invertebrates are multicellular organisms consisting of a wide range of marine environmental species. Unlike vertebrates, including humans, one of the challenges in identifying and tracking invertebrate stem cells is the lack of a specific marker. Labeling stem cells with magnetic particles provides a non-invasive, in vivo tracking method using MRI. This study suggests antibody-conjugated iron nanoparticles (NPs), which are detectable with MRI for in vivo tracking, to detect stem cell proliferation using the Oct4 receptor as a marker of stem cells. In the first phase, iron NPs were fabricated, and their successful synthesis was confirmed using FTIR spectroscopy. Next, the Alexa Fluor anti-Oct4 antibody was conjugated with as-synthesized NPs. Their affinity to the cell surface marker in fresh and saltwater conditions was confirmed using two types of cells, murine mesenchymal stromal/stem cell culture and sea anemone stem cells. For this purpose, 106 cells of each type were exposed to NP-conjugated antibodies and their affinity to antibodies was confirmed by an epi-fluorescent microscope. The presence of iron-NPs imaged with the light microscope was confirmed by iron staining using Prussian blue stain. Next, anti-Oct4 antibodies conjugated with iron NPs were injected into a brittle star, and proliferating cells were tracked by MRI. To sum up, anti-Oct4 antibodies conjugated with iron NPs not only have the potential for identifying proliferating stem cells in different cell culture conditions of sea anemone and mouse cell cultures but also has the potential to be used for in vivo MRI tracking of marine proliferating cells.

Preconcentration and determination of trace Hg(ii) using ultrasound-assisted dispersive solid phase microextraction

Defect rich molybdenum disulfide (MoS₂) nanosheets were hydrothermally synthesized and their potential for ultrasound assisted dispersive solid phase microextraction of trace Hg(ii) ions was assessed. Ultrasonic dispersion allows the MoS₂ nanosheets to chelate rapidly and evenly with Hg(ii) ions and results in improving the precision and minimizing the extraction time. The multiple defect rich surface was characterized by X-ray diffraction and high-resolution transmission electron microscopy. The surface charge of intrinsically sulfur rich MoS₂ nanosheets and their elemental composition was characterized by zeta potential measurements, energy dispersive spectroscopy, and X-ray photoelectron spectroscopy. The cracks and holes on the basal planes of MoS₂ led to diffusion of the Hg(ii) ions into the interior channels. Inner-sphere chelation along with outer-sphere electrostatic interaction were the proposed mechanism for the Hg(ii) adsorption onto the MoS₂ surface. The experimental data showed good selectivity of MoS₂ nanosheets towards Hg(ii) adsorption. The systematic and constant errors of the proposed method were ruled out by the analysis of the Standard Reference Material (>95% recovery with <5% RSD). The Student's t-test values for the analyzed Standard Reference Material were found to be less than the critical Student's t value at 95% confidence level. The limit of detection (3S) was found to be 0.01 ng mL⁻¹. The MoS₂ nanosheets were successfully employed for the analysis of Hg(ii) in environmental water samples.

Hg(ii) ion adsorption onto an MoS₂ surface.

Preparation of flower-like molybdenum disulfide for solid-phase extraction of N-nitrosoamines in environmental water samples

In this paper, a flower-like molybdenum disulfide material was prepared by hydrothermal method and was first used as adsorbents in the solid-phase extraction process for enriching N-nitrosoamines. Molybdenum disulfide exhibited three-dimensional petal-like microspheres with about 500 nm in diameter. The relevant analyte extraction and elution parameters (sample volumes, solution pH, washing solvents, elution solvents, and elution volumes) were optimized to improve the solid-phase extraction efficiency. The solid-phase extraction process coupled with high-performance liquid chromatography-tandem mass spectrometry for determining N-nitrosoamines in environmental water samples was established. The limits of detection were in the range of 0.01-0.05 ng/mL. The satisfactory recoveries (68.9-106.1%) were obtained at three different spiked concentrations (2, 5, and 8 ng/mL) in water samples, and the relative standard deviations were between 1.96 and 8.38%. This proposed method not only showed high sensitivity and good reusability but also provided a new adsorbent for enriching trace N-nitrosoamines in environmental water samples.

Greenness of magnetic nanomaterials in miniaturized extraction techniques: A review

Green analytical chemistry principles should be followed, as much as possible, and particularly during the development of analytical sample preparation methods. In the past few years, outstanding materials such as ionic liquids, metal-organic frameworks, carbonaceous materials, molecularly imprinted materials, and many others, have been introduced in a wide variety of miniaturized techniques in order to reduce the amount of solvents and sorbents required during the analytical sample preparation step while pursuing more efficient extraction methods. Among them, magnetic nanomaterials (MNMs) have gained special attention due to their versatile properties. Mainly, their ability to be separated from the sample matrix using an external magnetic field (thus enormously simplifying the entire process) and their easy combination with other materials, which implies the inclusion of a countless number of different functionalities, highly specific in some cases. Therefore, MNMs can be used as sorbents or as magnetic support for other materials which do not have magnetic properties, the latter permiting their combination with novel materials. The greenness of these magnetic sorbents in miniaturized extractions techniques is generally demonstrated in terms of their ease of separation and amount of sorbent required, while the nature of the material itself is left unnoticed. However, the synthesis of MNMs is not always as green as their applications, and the resulting MNMs are not always as safe as desired. Is the analytical sample preparation field ready for using green magnetic nanomaterials? This review offers an overview, from a green analytical chemistry perspective, of the current state of the use of MNMs as sorbents in microextraction strategies, their preparation, and the analytical performance offered, together with a critical discussion on where efforts should go.

CO2-effervescence assisted dispersive micro solid-phase extraction based on a magnetic layered double hydroxide modified with polyaniline and a surfactant for efficient pre-concentration of heavy metals in cosmetic samples

In this paper, a CO2-effervescence assisted dispersive micro solid-phase extraction procedure (CO2-EA-DμSPE) using a magnetic layered double hydroxide modified with polyaniline and a surfactant (Zn-Al-LDH-PA-DBSNa-Fe3O4) was applied for the pre-concentration of heavy metals (Ni2+, Pb2+, Co2+, and Cd2+). The final analysis of the analytes was carried out by atomic absorption spectroscopy. XRD, FTIR, and SEM studies were used for the characterization of the synthesized nanoadsorbent. For the maximum extraction efficiency, effective factors (including pH, nanoadsorbent dosage, and volume of the eluent) were investigated using the central composite design (CCD) method. Under the optimum conditions, the preconcentration factor was more than 20. The linear ranges for Ni2+, Pb2+, Co2+, and Cd2+ were obtained as (5-550), (7-750), (5-500), and (3-100) ng mL-1, respectively. The proposed method provided low detection limits (1.4, 2.1, 1.5, and 0.9 ng mL-1 for Ni2+, Pb2+, Co2+, and Cd2+, respectively) and suitable repeatability (relative standard deviation values (RSDs) below 6.1%, n = 6). Finally, the current method was successfully used for the extraction of heavy metals from cosmetic samples.

Poly (deep eutectic solvents) as a new class of sustainable sorbents for solid phase extraction: application for preconcentration of Pb (II) from food and water samples

A new class of polymeric sorbents based on deep eutectic solvents (DESs) is introduced. These materials are obtained from simple and inexpensive precursors via an energy-efficient process. The primary benefit of these sorbents is that they possess the unique characteristics of DESs and porous materials simultaneously. Moreover, the possibility of tailoring deep eutectic solvents allows designing a specific polymer for a desired analyte, based on its physical and chemical properties. In this work, the deep eutectic solvent of tetrabutylammonium bromide and acrylic acid (1:2 molar ratio) was prepared and then polymerized under solventless condition. The synthesized polymer was characterized by FT-IR spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscopy (SEM), and Brunauer, Emmett and Teller analysis (BET) to evaluate the properties of the sorbent. The poly (TBAB-2AA DES) was applied as a selective sorbent for preconcentration of lead from food and water samples prior to its quantification by flame atomic absorption spectroscopy (FAAS). Variable factors affecting the extraction were optimized, and under the optimum conditions, the calibration plot was linear in the range 5.0-250.0 μg L^-1. The relative standard deviation was (for n = 5) (RSD) < 3%. The limit of detection (LOD) and the enhancement factor were found to be 2.0 μg L^-1 and 50, respectively. Finally, the accuracy of the method was assessed by comparison of the results with those obtained by direct determination of lead using inductively coupled plasma mass spectrometry (ICP-MS) and spiked real samples. The obtained recoveries were between 92 and 106%. Graphical abstract.

A simple and rapid technique for the determination of copper based on air-assisted liquid-liquid microextraction and image colorimetric analysis

In this study, a new, cheap, simple and rapid method for the determination of copper in water and food samples using air-assisted liquid-liquid microextraction and digital image decomposition into the primary colors Red (R), Green (G) and Blue (B) is introduced. In the proposed method, sodium diethyl-dithiocarbamate (Na-DDTC) and carbon tetrachloride (CCl4) were used as the chelating agent and extraction solvent, respectively. The digital images of the extraction phase were obtained using an Android mobile phone and analyzed using a free app (Color Grab). Then the value of the B channel was taken as the analytical signal. The effects of different parameters influencing the extraction efficiency were investigated and optimized. Under the optimal conditions, the limit of detection (LOD) and quantitation (LOQ) were 1.5 and 5 μg L-1, respectively. The repeatability of the proposed method, expressed as the relative standard deviation (RSD), was 4.53% for intra-day (n = 8, C = 100 μg L-1) and 5.66% for inter-day (n = 5) precision. The proposed method was applied for the determination of trace amounts of copper in rice, lettuce and water samples with satisfactory results validated by the Graphite Furnace Atomic Absorption Spectrometry technique.

Using PVA/CA/Au NPs electrospun nanofibers as a green nanosorbent to preconcentrate and determine Pb2+and Cu2+in rice samples, water sources and cosmetics

Polyvinyl alcohol (PVA)/citric acid (CA)/Au NPs electrospun nanofibers was synthesized and applied as a green and efficient sorbent to extract and preconcentrate Pb²⁺and Cu²⁺from water sources, rice samples and cosmetics before FAAS.

Pipette-tip solid-phase extraction using cetyltrimethylammonium bromide enhanced molybdenum disulfide nanosheets as an efficient adsorbent for the extraction of sulfonamides in environmental water samples

Surfactant cetyltrimethylammonium bromide enhanced molybdenum disulfide was used as an adsorbent in pipette-tip solid-phase extraction for the pretreatment of sulfonamides in environmental water samples. The factors affecting the extraction recoveries of the analytes, including the sample pH value, amount of sorbent, type and volume of eluent solution, and salt concentration were optimized. This pipette-tip solid-phase extraction method demonstrated good linearity (0.05-10.0 µg/L) with a coefficient of determination of 0.9984-0.9996, limit of detection (0.2-0.4 ng/L) and limit of quantitation (0.5-1.0 ng/L), good analyte recoveries (76-91), and acceptable limit of quantitation (<10%) under the optimized conditions. These results indicated that the proposed method was a good tool for monitoring sulfonamides in environmental water samples.

Graphene oxide chemically modified with 5-amino-1,10-phenanthroline as sorbent for separation and preconcentration of trace amount of lead(II)

Graphene oxide (GO) was chemically functionalized with 5-amino-1,10-phenanthroline. The resulting conjugate (phen-GO) was characterized by scanning electron microscopy and X-ray photoelectron spectroscopy. The experiments show that phen-GO has a high affinity for extraction of Pb(II) ions. Isotherms and kinetics fit the Langmuir model and pseudo-second-order equations. By using phen-GO as a sorbent, Pb(II) ions can be quantitatively adsorbed at pH 6.0. The adsorption capacity is 548 mg g^-1. Following desorption with 2 mol L^-1 HNO₃, Pb(II) was quantified by inductively coupled plasma optical emission spectrometry. The effects of pH value, eluent type, sorption time, sample volume, and matrix ions were optimized. The accuracy of the method was validated by analysis of the reference materials DOLT-3 (dogfish liver) and SRM 1640a (natural water). Under optimal conditions, the calibration plots cover the 0.25 to 500 ng mL^-1 Pb(II) concentration range. The method was successfully applied to the analysis of spiked water and biological samples. Other figures of merit include a preconcentration factor of 250, a detection limit of 46 ng L^-1, and a relative standard deviation of <5%. Graphical abstract Schematic presentation of the dispersive solid-phase extraction of lead(II) ions using graphene oxide modified with 5-amino-1,10-phenanthroline, followed by their determination by inductively coupled plasma optical emission spectrometry (ICP OES).

Determination of sulfonamides in milk by capillary electrophoresis with PEG@MoS2 as a dispersive solid-phase extraction sorbent

A synthetic polyethylene glycol-molybdenum disulfide (PEG@MoS₂) composite was prepared using a simple method, and the application of this material in dispersive solid-phase extraction (DSPE) was investigated for the enrichment of eight sulfonamides (SAs) in milk samples. The composite was characterized by energy dispersive spectroscopy, scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy and Brunauer-Emmett-Teller measurements. The results showed that the MoS₂ synthesized in the presence of PEG has the advantage of a larger surface area and that the adsorption effect of this MoS₂ was enhanced. After extraction, the eight SAs were separated by capillary zone electrophoresis with a good linear relationship (R² > 0.9902) in the range of 0.3-30 µg ml^-1 and good precision (between 0.32% and 9.83%). Additionally, good recoveries (between 60.52% and 110.91%) were obtained for the SAs in the milk samples. The developed PEG@MoS₂-based DSPE method could be applied for the enrichment of SAs in real milk samples.

Vortex assisted solid-phase extraction of lead(II) using orthorhombic nanosized Bi2WO6 as a sorbent

Nanosized single crystal orthorhombic Bi₂WO₆ was synthesized by a hydrothermal method and used as a sorbent for vortex assisted solid phase extraction of lead(II). The crystal and molecular structure of the sorbent was examined using XRD, Raman, SEM and SEM-EDX analysis. Various parameters affecting extraction efficiency were optimized by using multivariate design. The effect of diverse ions on the extraction also was studied. Lead was quantified by flame atomic absorption spectrometry (FAAS). The recoveries of lead(II) from spiked samples (at a typical spiking level of 200-400 ng·mL^-1) are >95%. Other figures of merit includes (a) a detection limit of 6 ng·mL^-1, (b) a preconcentration factor of 50, (c) a relative standard deviation of 1.6%, and (d) and adsorption capacity of 6.6 mg·g^-1. The procedure was successfully applied to accurate determination of lead in (spiked) pomegranate and water samples. Graphical abstract Nanosized single crystal orthorhombic Bi₂WO₆ was synthesized and characterized by a hydrothermal method and used as a sorbent for vortex assisted solid phase extraction of lead(II). The procedure was successfully applied to accurate determination of lead in (spiked) pomegranate and water samples.