Aptamer-based zearalenone assay based on the use of a fluorescein label and a functional graphene oxide as a quencher

A smartphone-assisted colorimetric aptasensor based on aptamer and gold nanoparticles for visual, fast and sensitive detection of ZEN in maize

A simple, fast, low cost, sensitive, intuitive, visual, label-free, and smartphone-assisted aptamer sensor based on colorimetric assay for the measurement of zearalenone was constructed. The nucleic acid aptamer of zearalenone was used as the recognition element and gold nanoparticles were used as the indicator. Several factors that could influence sensitivity, including the concentration of aptamer and NaCl, and incubation time, and specificity, have been investigated. The results showed that under the optimal conditions, the signal had a good linear relationship when zearalenone concentration is 5-300 ng/mL. A linear regression equation is Y = 0.0003X + 0.5128 (R2 = 0.9989) and a limit of detection is 5 ng/mL. The specificity of the sensor was good. Zearalenone in maize samples were successfully measured. The recoveries of Zearalenone are 81.3 %-96.4 %. The whole process takes only 15 min to complete. The smartphone assisted colorimetric aptamer sensor can be used for the detection of zearalenone in maize.

Fluorescence Sensor for Zearalenone Detection Based on Oxidized Single-walled Carbon Nanohorns/N-doped Carbon Quantum Dots-aptamer

Zearalenone (ZEN), a resorcinolactone toxin, which has been a potential threat to agricultural production and human health. In this study, a sample and rapid fluorescence sensor was established for the detection of ZEN, which is based on the fluorescence properties of N-doped carbon dots-aptamer (NCDs-apt) and the quenching ability of oxidized single-walled carbon nanohorns (oxSWCNHs). NCDs synthesized by one-step hydrothermal method were connected with ZEN-aptamer (ZEN-apt), and oxSWCNHs were added to quench the fluorescence of NCDs-apt. Therefore, an oxSWCNHs/NCDs-apt aptasensor based on fluorescence "on-off" for the determination of ZEN in food was formed. Under optimum conditions, the limit of detection (LOD) of this method was 18 ng/mL and the linear range was 20 ~ 100 ng/mL. The possible interfering substances were investigated, and the results showed excellent selectivity. The recoveries were in the range of 99.5%~114.3%, and the relative standard deviations (RSDs) were not more than 6.5%, which demonstrated that this aptasensor was successfully applied for the detection of ZEN in food samples with satisfactory result.

A quantum dot aptamer fluorescent sensor based on magnetic graphene oxide for the detection of zearalenone

As an estrogenic mycotoxin found in a wide range of agricultural crops, the toxicity of zearalenone (ZEN) poses a serious risk to human health. Accordingly, to achieve rapid detection of zearalenone in complex samples, an aptamer fluorescence sensor based on magnetic graphene oxide was developed. Compared with traditional methods, this technique has the virtues of simple operation, low cost, and reliable performance. Magnetic graphene oxide (MGO) was synthesized as a fluorescent bursting agent, using a chemical precipitation approach by depositing Fe3O4 on the surface of graphene oxide. As a fluorescent probe, an aptamer coupling with CdTe quantum dots and zearalenone was used. Following the specific binding of zearalenone and the aptamer, the affinity interaction between the fluorescent probe and MGO was weakened, resulting in the recovery of fluorescence and making the qualitative and quantitative analysis of zearalenone available via fluorescence intensity determination. The results indicated that the method's linear range was 5-120 μg L-1 and its detection limit was 2.9 μg L-1. In addition, the recoveries varied from 76.4 to 118.8% for crop samples, with relative standard deviations (RSDs) between 0.8 and 9.5%, which suggests an effective method for the separation and detection of mycotoxins in actual environmental samples.

Novel insights into versatile nanomaterials integrated bioreceptors toward zearalenone ultrasensitive discrimination

Detrimental contamination of zearalenone (ZEN) in crops and foodstuffs has drawn intensive public attention since it poses an ongoing threat to global food security and human health. Highly sensitive and rapid response ZEN trace analysis suitable for complex matrices at different processing stages is an indispensable part of food production. Conventional detection methods for ZEN encounter many deficiencies and demerits such as sophisticated equipment and heavy labor intensity. Alternatively, the nanomaterial-based biosensors featured with high sensitivity, portability, and miniaturization are springing up and emerging as superb substitutes to monitor ZEN in recent years. Herein, we predominantly devoted to overview the progress in the fabrication strategies and applications of various nanomaterial-based biosensors, highlighting rationales on sensing mechanisms, response types, and practical analytical performance. Synchronously, the versatile nanomaterials integrating with diverse recognition elements for augmenting sensing capabilities are emphasized. Finally, critical challenges and perspectives to expedite ZEN detection are outlooked.

Trends in Paper-Based Sensing Devices for Clinical and Environmental Monitoring

Environmental toxic pollutants and pathogens that enter the ecosystem are major global issues. Detection of these toxic chemicals/pollutants and the diagnosis of a disease is a first step in efficiently controlling their contamination and spread, respectively. Various analytical techniques are available to detect and determine toxic chemicals/pathogens, including liquid chromatography, HPLC, mass spectroscopy, and enzyme-linked immunosorbent assays. However, these sensing strategies have some drawbacks such as tedious sample pretreatment and preparation, the requirement for skilled technicians, and dependence on large laboratory-based instruments. Alternatively, biosensors, especially paper-based sensors, could be used extensively and are a cost-effective alternative to conventional laboratory testing. They can improve accessibility to testing to identify chemicals and pollutants, especially in developing countries. Due to its low cost, abundance, easy disposal (by incineration, for example) and biocompatible nature, paper is considered a versatile material for the development of environmentally friendly electrochemical/optical (bio) sensor devices. This review presents an overview of sensing platforms constructed from paper, pointing out the main merits and demerits of paper-based sensing systems, their fabrication techniques, and the different optical/electrochemical detection techniques that they exploit.

MnO2 nanosheets-triggered oxVB1 fluorescence immunoassay for detection zearalenone

In this study, an alkaline phosphatase (ALP)-mediated fluorescence immunoassay for detecting zearalenone (ZEN) was established based on the oxVB₁ fluorescence signal modulated by MnO₂ nanosheets (MnO₂ NS). As the ALP-antibody content increased, more 2-phosphoascorbic acid (AAP) was hydrolyzed to ascorbic acid (AA) which destroyed the MnO₂ NS rapidly. In the lack of MnO₂ NS, VB₁ cannot be oxidized to oxVB₁ for emitting fluorescence. On the contrary, the fluorescence of oxVB₁ recovered slowly with the decrease of the ALP-antibody concentration. In the optimization condition, the detection limit of this method was 15.5 pg mL^-1. Moreover, the recovery of ZEN in real samples ranged from 94.24 % to 108.26 %, which indicated the remarkable accuracy and reliability of this approach. Meanwhile, the proposal of this fluorescence immunoassay provided a new possibility for detecting other targets by replacing antibodies and antigens.

A Novel and Label-Free Chemiluminescence Detection of Zearalenone Based on a Truncated Aptamer Conjugated with a G-Quadruplex DNAzyme

Zearalenone (ZEN), one of the most frequently occurring mycotoxin contaminants in foods and feeds, poses considerable threat to human and animal health, owing to its acute and chronic toxicities. Thus, rapid and accurate detection of ZEN has attracted broad research interest. In this work, a novel and label-free chemiluminescence aptasensor based on a ZEN aptamer and a G-quadruplex DNAzyme was constructed. It was established on a competitive assay between ZEN and an auxiliary DNA for the aptamer, leading to activation of the G-quadruplex/hemin DNAzyme and subsequent signal amplification by chemiluminescence generation after substrate addition. To maximize the detection sensitivity, numerous key parameters including truncated aptamers were optimized with molecular docking analysis. Upon optimization, our aptasensor exhibited a perfect linear relationship (R² = 0.9996) for ZEN detection in a concentration range of 1-100 ng/mL (3.14-314.10 nM) within 40 min, achieving a detection limit of 2.85 ng/mL (8.95 nM), which was a 6.7-fold improvement over that before optimization. Most importantly, the aptasensor obtained a satisfactory recovery rate of 92.84-137.27% and 84.90-124.24% for ZEN-spiked wheat and maize samples, respectively. Overall, our label-free chemiluminescence aptasensor displayed simplicity, sensitivity, specificity and practicality in real samples, indicating high application prospects in the food supply chain for rapid detection of ZEN.

Evanescent Wave Optical-Fiber Aptasensor for Rapid Detection of Zearalenone in Corn with Unprecedented Sensitivity

Zearalenone (ZEN) is a common mycotoxin pollutant found in agricultural products. Aptamers are attractive recognition biomolecules for the development of mycotoxin biosensors. Even though numerous aptasensors have been reported for the detection of ZEN in recent years, many of them suffer from problems including low sensitivity, low specificity, tedious experimental steps, high-cost, and difficulty of automation. We report here the first evanescent wave optical-fiber aptasensor for the detection of ZEN with unprecedented sensitivity, high specificity, low cost, and easy of automation. In our aptasensor, a 40-nt ZEN-specific aptamer (8Z₃₁) is covalently immobilized on the fiber. The 17-nt fluorophore Cy5.5-labeled complementary DNA strand and ZEN competitively bind with the aptamer immobilized on the fiber, enabling the signal-off fluorescent detection of ZEN. The coating of Tween 80 enhanced both the sensitivity and the reproducibility of the aptasensor. The sensor was able to detect ZEN spiked-in the corn flour extract with a semilog linear detection range of 10 pM-10 nM and a limit of detection (LOD, S/N = 3) of 18.4 ± 4.0 pM (equivalent to 29.3 ± 6.4 ng/kg). The LOD is more than 1000-fold lower than the maximum ZEN residue limits set by China (60 μg/kg) and EU (20 μg/kg). The sensor also has extremely high specificity and showed negligible cross-reactivity to other common mycotoxins. In addition, the sensor was able to be regenerated for 28 times, further decreasing its cost. Our sensor holds great potential for practical applications according to its multiple compelling features.

A fluorescent aptasensor for the detection of Aflatoxin B1 by graphene oxide mediated quenching and release of fluorescence

Aflatoxin B1 contamination in food and agro commodities has been major concern of global food safety and trade industry. There is an urgent need to develop sensitive and on-site detection methods for aflatoxins mainly, AFB1 monitoring. In the present study, a fluorophore (Alexa Fluor 488) based aptamer biosensor was devised in combination with graphene oxide (GO) for the detection of Aflatoxin B1 (AFB1). The optimized diagnostic procedure consisted of a fluorescent modified aptamer (Ax-AFLA5) as detection probe and GO mediated quenching of the same; to the quenched system AFB1 was added resulting in subsequent release of fluorescence. The principle of GO based adsorption of ssDNA and successive desorption in the presence of target mycotoxin was utilised in development of the bioassay. In presence of target mycotoxin, the GO adsorbed ssDNA attained a structural conformation resulting in desorption and subsequent release of fluorescence. Assay parameters such as concentration of fluorescent probe, GO and incubation time were evaluated and optimized. The optical signal thus generated could determine presence of AFB1 in the given sample. Selectivity of the method with other mycotoxins was evaluated. The linear range of AFB1 from 0.2-200 ppb was assessed. Visible green fluorescence release was observed at 20 ppb under UV transilluminator and the detection limit of the developed assay was interpreted as 20 ppb of AFB1. The suitability of the assay for AFB1 quantification in groundnut and natural samples was also evaluated. Thus, the developed assay can be a field deployable, reliable and rapid alternative tool for onsite screening method of aflatoxins and other mycotoxins at field level.

A novel approach to design electrochemical aptamer-based biosensor for ultrasensitive detecting of zearalenone as a prevalent estrogenic mycotoxin

BACKGROUND

Zearalenone is a well-known estrogenic mycotoxin produced by Fusarium species, a serious threat to the agricultural and food industries worldwide. Zearalenone, with its known metabolites, are biomarkers of exposure to certain fungi, primarily through food. It has considerable toxic effects on biological systems due to its carcinogenicity, mutagenicity, renal toxicity, teratogenicity, and immunotoxicity.

INTRODUCTION

This study aims to design a simple, quick, precise, and cost-effective method on a biosensor platform to evaluate the low levels of this toxin in foodstuffs and agricultural products.

METHODS

An aptamer-based electrochemical biosensor was introduced that utilizes screen-printed gold electrodes instead of conventional electrodes. The electrode position process was employed to develop a gold nanoparticle-modified surface to enhance the electroactive surface area. Thiolated aptamers were immobilized on the surface of gold nanoparticles, and subsequently, the blocker and analyte were added to the modified surface. In the presence of a redox probe, electrochemical characterization of differential pulse voltammetry, cyclic voltammetry, and electrochemical impedance spectroscopy were used to investigate the various stages of aptasensor fabrication.

RESULTS

The proposed aptasensor for zearalenone concentration had a wide linear dynamic range covering the 0.5 pg/mL to 100 ng/mL with a 0.14 pg/mL detection limit. Moreover, this aptasensor had high specificity so that a non-specific analyte cannot negatively affect the selectivity of the aptasensor.

CONCLUSION

Overall, due to its simple design, high sensitivity, and fast performance, this aptasensor showed a high potential for assessing zearalenone in real samples, providing a clear perspective for designing a portable and cost-effective device.

Graphene oxide and fluorescent aptamer based novel biosensor for detection of 25-hydroxyvitamin D3

For maintaining the healthy metabolic status, vitamin D is a beneficial metabolite stored majorly in its pre-activated form, 25-hydroxyvitamin D₃ (25(OH)D₃). Due to its important role in bone strengthening, the study was planned to quantify 25(OH)D₃ levels in our blood. Quantification techniques for 25(OH)D₃ are costly thus requiring a need for a low cost, and sensitive detection methods. In this work, an economic, and sensitive sensor for the detection of 25(OH)D₃ was developed using aptamer and graphene oxide (GO). Aptamer is an oligonucleotide, sensitive towards its target, whereas, GO with 2D nanosheets provides excellent quenching surface. Aptamer labeled with fluorescein (5’, 6-FAM) is adsorbed by π–π interaction on the GO sheets leading to quenching of the fluorescence due to Förster resonance energy transfer (FRET). However, in the presence of 25(OH)D₃, a major portion of aptamer fluorescence remains unaltered, due to its association with 25(OH)D₃. However, in the absence, aptamer fluorescence gets fully quenched. Fluorescence intensity quenching was monitored using fluorescence spectrophotometer and agarose gel based system. The limit of detection of 25(OH)D₃ by this method was found to be 0.15 µg/mL whereas when GO-COOH was used, limit of detection was improved to 0.075 µg/mL. Therefore, this method could come up as a new sensing method in the field of vitamin D detection.

An Aptamer-Array-Based Sample-to-Answer Biosensor for Ochratoxin A Detection via Fluorescence Resonance Energy Transfer

Food toxins are a hidden threat that can cause cancer and tremendously impact human health. Therefore, the detection of food toxins in a timely manner with high sensitivity is of paramount importance for public health and food safety. However, the current detection methods are relatively time-consuming and not practical for field tests. In the present work, we developed a novel aptamer-chip-based sample-to-answer biosensor (ACSB) for ochratoxin A (OTA) detection via fluorescence resonance energy transfer (FRET). In this system, a cyanine 3 (Cy3)-labeled OTA-specific biotinylated aptamer was immobilized on an epoxy-coated chip via streptavidin-biotin binding. A complementary DNA strand to OTA aptamer at the 3′-end was labeled with a black hole quencher 2 (BHQ2) to quench Cy3 fluorescence when in proximity. In the presence of OTA, the Cy3-labeled OTA aptamer bound specifically to OTA and led to the physical separation of Cy3 and BHQ2, which resulted in an increase of fluorescence signal. The limit of detection (LOD) of this ACSB for OTA was 0.005 ng/mL with a linearity range of 0.01–10 ng/mL. The cross-reactivity of ACSB against other mycotoxins, ochratoxin B (OTB), aflatoxin B1 (AFB1), zearalenone (ZEA), or deoxynilvalenol (DON), was less than 0.01%. In addition, this system could accurately detect OTA in rice samples spiked with OTA, and the mean recovery rate of the spiked-in OTA reached 91%, with a coefficient of variation (CV) of 8.57–9.89%. Collectively, the ACSB may represent a rapid, accurate, and easy-to-use platform for OTA detection with high sensitivity and specificity.

Carbon-Based Nanocomposite Smart Sensors for the Rapid Detection of Mycotoxins

Carbon-based nanomaterials have become the subject of intensive interest because their intriguing physical and chemical properties are different from those of their bulk counterparts, leading to novel applications in smart sensors. Mycotoxins are secondary metabolites with different structures and toxic effects produced by fungi. Mycotoxins have low molecular weights and highly diverse molecular structures, which can induce a spectrum of biological effects in humans and animals even at low concentrations. A tremendous amount of biosensor platforms based on various carbon nanocomposites have been developed for the determination of mycotoxins. Therefore, the contents of this review are based on a balanced combination of our own studies and selected research studies performed by academic groups worldwide. We first address the vital preparation methods of biorecognition unit (antibodies, aptamers, molecularly imprinted polymers)-functionalized carbon-based nanomaterials for sensing mycotoxins. Then, we summarize various types of smart sensors for the detection of mycotoxins. We expect future research on smart sensors to show a significant impact on the detection of mycotoxins in food products.

Copper Oxide Nanoparticle-Based Immunosensor for Zearalenone Analysis by Combining Automated Sample Pre-Processing and High-Throughput Terminal Detection

A rapid and high-throughput fluorescence detection method for zearalenone (ZEN) based on a CuO nanoparticle (NP)-assisted signal amplification immunosensor was developed using an automated sample pretreatment and signal conversion system. CuO NPs with high stability and biocompatibility were used as carriers to immobilize anti-ZEN antibodies. The obtained CuO NP-anti-ZEN can maintain the ability to recognize target toxins and act as both a signal source and carrier to achieve signal conversion using automated equipment. In this process, target toxin detection is indirectly transformed to Cu²⁺ detection because of the large number of Cu²⁺ ions released from CuO NPs under acidic conditions. Finally, a simple and high-throughput fluorescence assay based on a fluorescent tripeptide molecule was employed to detect Cu²⁺, using a multifunctional microporous plate detector. A good linear relationship was observed between the fluorescence signal and the logarithm of ZEN concentration in the range of 16.0–1600.0 μg/kg. Additionally, excellent accuracy with a high recovery yield of 99.2–104.9% was obtained, which was concordant with the results obtained from LC-MS/MS of naturally contaminated samples. The CuO NP-based assay is a powerful and efficient screening tool for ZEN detection and can easily be modified to detect other mycotoxins.

Simple and efficient method for the quantification of antiepileptic drugs in human plasma by using magnetic graphene oxide-β-cyclodextrin composite as a sorbent

Background

In recent days, solid-phase extraction methods are widely utilized for the extraction of drug molecules from plasma samples due to their easy operating procedures and low matrix effect. The trace-level solid-phase extraction of three structurally related antiepileptic drugs brivaracetam (BVC), eslicarbazepine acetate (ESL), and carbamazepine (CBZ) was investigated by using a magnetic porous material graphene oxide-β-cyclodextrin (MGO-CD). Morphology, magnetic properties, and structure of the synthesized MGO-CD were characterized by using FT-IR, SEM, XRD, and VSM.

Results

Solid-phase extraction (SPE) methods were used to extract the analytes from human plasma. Different extraction solvents such as acetonitrile (ACN), methanol (MeOH), acetone, chloroform (CHCl3), tertiary butyl diethyl ether (TBDE), and ethyl acetate (EtOAc) with variable polarities were used to extract drug molecules from MGO-CD. The linearity analysis showed good correlation coefficient values (R2) of 0.9989, 0.9995, and 0.9982 for BVC, ESL, and CBZ respectively. The LOD and LOQ ranges were found to be 6.14–28.32 ng mL−1 and 20.45–94.31 ng mL−1 respectively.

Conclusion

The high accuracy and precision made the developed HPLC method with MGO-CD a suitable alternative for the bioequivalence study of BVC, ESL, and CBZ in human plasma. This developed HPLC-UV method has good efficiency for recoveries and good linearity and is simple to handle. And also, it gave low retention time for the three antiepileptic drugs within 8 min. It provides high efficiency for the extraction of trace-level substances from human plasma.

Aptasensors for mycotoxin detection: A review

Mycotoxins are toxic compounds produced by fungi, which represent a risk to the food and feed supply chain, having an impact on health and economies. A high percentage of feed samples have been reported to be contaminated with more than one type of mycotoxin. Systematic, cost-effective and simple tools for testing are critical to achieve a rapid and accurate screening of food and feed quality. In this review, we describe the various aptamers that have been selected against mycotoxins and their incorporation into optical and electrochemical aptasensors, outlining the strategies exploited, highlighting the advantages and disadvantages of each approach. The review also discusses the different materials used and the immobilization methods employed, with the aim of achieving the highest sensitivity and selectivity.

Detection Strategies of Zearalenone for Food Safety: A Review

Zearalenone (ZEN) is a toxic compound produced by the metabolism of fungi (genus Fusarium) that threaten the food and agricultural industry belonging to the in foods and feeds. ZEN has toxic effects on human and animal health due to its mutagenicity, teratogenicity, carcinogenicity, nephrotoxicity, immunotoxicity, and genotoxicity. To ensure food safety, rapid, precise, and reliable analytical methods can be developed for the detection of toxins such as ZEN. Different selective molecular diagnostic elements are used in conjunction with different detection strategies to achieve this goal. In this review, the use of electrochemical, colorimetric, fluorometric, refractometric as well as other strategies were discussed for ZEN detection. The success of the sensors in analytical performance depends on the development of receptors with increased affinity to the target. This requirement has been met with different immunoassays, aptamer-assays, and molecular imprinting techniques. The immobilization techniques and analysis strategies developed with the combination of nanomaterials provided high precision, reliability, and convenience in ZEN detection, in which electrochemical strategies perform the best.

A simple mesoporous silica nanoparticle-based fluorescence aptasensor for the detection of zearalenone in grain and cereal products

Zearalenone (ZEN) is a type of estrogenic mycotoxin commonly occurring in cereals. The aim of this study was to design a simple, rapid, inexpensive and ultrasensitive fluorescence assay for the determination of ZEN. Here, amino-modified mesoporous silica nanoparticles (MSNs-NH₂) were synthesized to be the positive charge-rich reactor. A 6-carboxy-fluorescein-labeled aptamer (aptamer-FAM) was designed as the signal probe, ZEN-capture probe and negative charge reactor. In the absence of ZEN, the negatively charged aptamer-FAM combined with the positively charged MSNs-NH₂ in an electrostatic manner. In the presence of ZEN, the fluorescence intensity in the supernatant increased significantly because the aptamer-FAM could bind to ZEN instead of MSNs-NH₂. Under the optimal experimental conditions, this assay exhibited excellent specificity, repeatability and a wide linearity range of 0.005-150 ng/mL, with a detection limit of 0.012 ng/mL. Additionally, it showed high recovery (83.3-101.5%) for the spiked samples. There was no statistically significant difference in the ZEN concentrations detected by the proposed assay and HPLC in naturally contaminated samples. Overall, this design provides a new strategy for the rapid, inexpensive and sensitive detection of ZEN, and it could be applied to develop fluorometric assays for different targets by the selection of appropriate aptamers. Graphical abstract.

Electrochemical determination of zearalenone using a label-free competitive aptasensor

An electrochemical aptasensor is described for determination of the phytohormone of zearalenone (ZEA). The gold electrode was modified with ZEA via covalent attachment using cysteamine-hydrochloride and 1,4-phenylene diisocyanate linker. A truncated ZEA aptamer with a dissociation constant of 13.4 ± 2.1 nM was used in an aptasensor. The electrochemical property was investigated using square wave voltammetry for monitoring the change in the electron transfer using the ferro/ferricyanide system as redox probe. Under optimal experimental conditions, the response was best measured at a potential of 0.20 V (vs. Ag/AgCl). The signals depended on the competitive mechanism between the immobilised ZEA and free ZEA for the aptamer binding site. The aptasensor works in the range 0.01 to 1000 ng·mL^-1 ZEA concentration, with a detection limit of 0.017 ng·mL^-1. High degree of cross-reactivity with the other analogues of ZEA was observed, whereas none towards other mycotoxins. The aptasensor was further applied for the determination of ZEA in the extract of maize grain and showed good recovery percentages between 87 and 110%. Graphical abstract Schematic representation of the electrochemical determination of zearalenone based on indirect competitive assay. Step a Immobilisation of ZEA on the surface of gold electrode via covalent attachment, b competition for the ZEA aptamer binding site between immobilised and free ZEA, and c current signal of the binding event based on SWV technique.

Progress on Structured Biosensors for Monitoring Aflatoxin B1 From Biofilms: A Review

Aspergillus exists commonly in many crops and any process of crop growth, harvest, storage, and processing can be polluted by this fungus. Once it forms a biofilm, Aspergillus can produce many toxins, such as aflatoxin B1 (AFB1), ochratoxin, zearalenone, fumonisin, and patulin. Among these toxins, AFB1 possesses the highest toxicity and is labeled as a group I carcinogen in humans and animals. Consequently, the proper control of AFB1 produced from biofilms in food and feed has long been recognized. Moreover, many biosensors have been applied to monitor AFB1 in biofilms in food. Additionally, in recent years, novel molecular recognition elements and transducer elements have been introduced for the detection of AFB1. This review presents an outline of recent progress made in the development of biosensors capable of determining AFB1 in biofilms, such as aptasensors, immunosensors, and molecularly imprinted polymer (MIP) biosensors. In addition, the current feasibility, shortcomings, and future challenges of AFB1 determination and analysis are addressed.

Graphene/aptamer probes for small molecule detection: from in vitro test to in situ imaging

Small molecules are key targets in molecular biology, environmental issues, medicine and food industry. However, small molecules are challenging to be detected due to the difficulty of their recognition, especially in complex samples, such as in situ in cells or animals. The emergence of graphene/aptamer probes offers an excellent opportunity for small molecule quantification owing to their appealing attributes such as high selectivity, sensitivity, and low cost, as well as the potential for probing small molecules in living cells or animals. This paper (with 130 refs.) will review the application of graphene/aptamer probes for small molecule detection. We present the recent progress in the design and development of graphene/aptamer probes enabling highly specific, sensitive and rapid detection of small molecules. Emphasis is placed on the success in their development and application for monitoring small molecules in living cells and in vivo systems. By discussing the key advances in this field, we wish to inspire more research work of the development of graphene/aptamer probes for both on-site or in situ detection of small molecules and its applications for investigating the functions of small molecules in cells in a dynamic way. Graphical abstract Graphene/aptamer probes can be used to construct different platforms for detecting small molecules with high specificity and sensitivity, both in vitro and in situ in living cells and animals.

Graphene-Based Steganographic Aptasensor for Information Computing and Monitoring Toxins of Biofilm in Food

Fungi-forming biofilm would produce various toxins in food. The toxin contamination will cause great harm to food and human health. Herein, a novel graphene-based steganographic aptasensor was assembled for multifunctional applications, which depended on the specific recognition and information encoding ability of DNA aptamers [mycotoxins, including zearalenone (ZEN) and ochratoxin A (OTA) aptamers, as models] and the selective absorption and fluorescence quenching capacities of graphene oxide (GO). The graphene-based steganographic aptasensor can be regarded as an information encryption and steganographic system using GO as a cover, aptamers for specific target recognition as information carriers and dual targets (ZEN and OTA) as special keys. In our work, the fluorescence of capture probes (Cy3 aptamer and Alexa Fluor 488 aptamer) was quenched by GO to realize information encryption. In the presence of dual targets in the GO-APT solution, Cy3 aptamer (APT1), and Alexa Fluor 488 aptamer (APT2) were released from the surface of GO, decrypting the hidden information. In addition, our work offers a sensor for rapid and sensitive simultaneous fluorescence determination of ZEN and OTA. The detection limit of the aptasensor was 1.797 ng/ml for ZEN and 1.484 ng/ml for OTA. In addition, the graphene-based steganographic aptasensor can be used to construct a molecular logic gate system in which GO, aptamers, and mycotoxins are employed as the input and compounds and fluorescence signals were used as the output. This would be helpful to control the biofilm toxin in the future.

Switchable fluorescence sensor toward PAT via CA-MWCNTs quenched aptamer-tagged carboxyfluorescein

A quenching based apta-sensing platform was developed for the detection of Patulin. Three different aptamer sequences were studied to screen the aptamer with the maximum affinity towards Patulin. Carboxyfluorescein (CFL) was used as a fluorescent dye while -COOH functionalized multiwall carbon nanotubes (MWCNTs) were applied as novel nanoquenchers. Aptamer tagged at the 3' end with 40 nucleotide bases exhibited the maximum affinity towards Patulin and caused substantial fluorescence recovery. Interestingly, the limit of detection (LOD) and limit of quantification (LOQ) were calculated as 0.13 μg L^-1and 0.41 μg L^-1 respectively. Commonly occurring mycotoxins in food were also tested to confirm the selectivity of apta-assay. The developed apta-assay was applied to a spiked apple juice sample and toxin recoveries were observed ranging from 96% to 98% (n = 3). These results demonstrated the potential of the developed apta-assay for the selective detection and quantification of Patulin in food samples.

A review on recent developments in optical and electrochemical aptamer-based assays for mycotoxins using advanced nanomaterials

This review (with 163 refs) covers the recent developments of nanomaterial-based optical and electrochemical sensors for mycotoxins. The review starts with a brief discussion on occurrence, distribution, toxicity of mycotoxins and the legislations in monitoring their levels. It further outlines the research methods, various recognition matrices and the strategies involved in the development of highly sensitive and selective sensor systems. It also points out the salient features and importance of aptasensors in the detection of mycotoxins along with the different immobilization methods of aptamers. The review meticulously discusses the performance of different optical and electrochemical sensors fabricated using aptamers coupled with nanomaterials (CNT, graphene, metal nanoparticles and metal oxide nanoparticles). The review addresses the limitations in the current developments as well as the future challenges involved in the successful construction of aptasensors with the functionalized nanomaterials. Graphical abstract Recent developments in nanomaterial based aptasensors for mycotoxins are summarized. Specifically, the efficiency of the nanomaterial coupled aptasensors (such as CNT, graphene, metal nanoparticles and metal oxide nanoparticles) in optical and electrochemical methods are discussed.

An aptamer-based fluorometric zearalenone assay using a lighting-up silver nanocluster probe and catalyzed by a hairpin assembly

An enzyme-free fluorometric assay is described for the determination of zearalenone (ZEN). The method combines (a) catalyzed hairpin assembly (CHA), (b) ultrahigh fluorescent light-up G-rich DNA sequences in proximity to silver nanoclusters (Ag NCs), and (c) the use of aptamers (Apt). In the presence of ZEN, the inhibit sequence (Inh) is released from the aptamer-trigger sequence (Apt-T) via the binding of ZEN and the aptamer of Apt-T. The free Apt-T acts as a switch that opens the hairpins H1 and H2 to generate H1-H2 complex. The released Apt-T is available to trigger the next round of CHA between H1 and H2. Finally, the hybridization between H1 and the Ag NCs probe (P) causes the G-rich sequence to be in close proximity to the dark Ag NCs encapsulated by P. This leads to highly efficient lighting up of the Ag NCs and the production of amplified fluorescence with excitation/emission peaks at 575/628 nm. Under the optimized conditions, a linear correlation was observed with concentrations ranging from 1.3 pg mL^-1 to 100 ng mL^-1, and the limit of detection was 0.32 pg mL^-1 (at S/N = 3). The method was successfully validated by analyzing maize and beer for levels of ZEN after a simple sample preparation procedure. Graphical abstractSchematic of the assay. The inhibit sequence (Inh) is released from aptamer-trigger sequence (Apt-T) via binding of ZEN and aptamer. The free Apt-T triggers catalyzed hairpin assembly (CHA).G-rich DNA is in proximity to silver nanoclusters (Ag NCs) and fluorescence intensity increases to detect ZEN.

Ultrasensitive ciprofloxacin assay based on the use of a fluorescently labeled aptamer and a nanocomposite prepared from carbon nanotubes and MoSe2

A nanocomposite was prepared from carbon nanotubes and MoSe₂ (CNT-MoSe₂). This nanomaterial quenches the fluorescence of fluorescein-labeled aptamers. When ciprofloxacin (CIP) binds to the aptamer, an aptamer/G-quadruplex complex will be formed and the interaction between labeled aptamer and CNT-MoSe₂ nanostructures is weakened. This leads to significant fluorescence recovery. Under optimized experimental conditions, the limit of detection is 0.63 ng mL^-1 with a good linearity in the range from 0.63 to 80 ng mL^-1. The assay was applied to the determination of CIP in spiked milk, and the recoveries range between 94.3 and 97.0% (n = 3). Conceivably, the method is a generic approach that can be extended to the determination of other analyte for which adequate aptamers are available. Graphical abstract Schematic presentation of CNT-MoSe₂ quenching based aptamer assay for the detection of ciprofloxacin. The assay exhibits good selectivity, stability and reproducibility, and low limit of detection.

Electrochemical Immuno- and Aptasensors for Mycotoxin Determination

Modern analysis of food and feed is mostly focused on development of fast and reliable portable devices intended for field applications. In this review, electrochemical biosensors based on immunological reactions and aptamers are considered in the determination of mycotoxins as one of most common contaminants able to negatively affect human health. The characteristics of biosensors are considered from the point of view of general principles of bioreceptor implementation and signal transduction providing sub-nanomolar detection limits of mycotoxins. Moreover, the modern trends of bioreceptor selection and modification are discussed as well as future trends of biosensor development for mycotoxin determination are considered.

Colorimetric zearalenone assay based on the use of an aptamer and of gold nanoparticles with peroxidase-like activity

An aptamer based colorimetric assay is described for the determination of zearalenone (ZEN). It is based on the inhibition of the peroxidase-mimicking activity of gold nanoparticles (AuNPs) by the ZEN aptamer. However, in the presence of ZEN, the aptamer is bound by ZEN and can no longer inhibit the peroxidase-mimicking activity of AuNPs. The color change of solution is related to ZEN concentration and observed with bare eyes. Under optimal conditions, the absorbance (at 630 nm) increases linearly in the ZEN concentration range of 10-250 ng·mL^-1, and the limit of detection is 10 ng·mL^-1. The specificity of the assay was verified by studying the effect of potential interferents. The recoveries from ZEN spiked corn and corn oil range from 92 to 110%, and the relative standard deviations are between 2.4 and 6.4%. The results are in good agreement with those obtained by an ELISA. Graphical abstract Schematic presentation of colorimetric assay for rapid and sensitive determination of zearalenone (ZEN) based on the inhibition of ZEN aptamer on the the peroxidase-like activity of gold nanoparticle (AuNPs).

Antibody Microarray Immunoassay for Simultaneous Quantification of Multiple Mycotoxins in Corn Samples

We developed and tested a prototype of an antibody microarray immunoassay for simultaneous quantitative detection of four typical mycotoxins (aflatoxin B₁, ochratoxin A, zearalenone, and fumonisin B₁) in corn samples. The test kit consisted of a nitrocellulose membrane layered with immobilized monoclonal antibodies against mycotoxins. During the assay, the mycotoxin-protein conjugates were biotinylated. The signal detection was enhanced by a combination of the biotin-streptavidin system and enhanced chemiluminescence (ECL). This improved the sensitivity of the assay. Under the optimized conditions, four calibration curves with goodness of fit (R² > 0.98) were plotted. The results showed that the detection limits for aflatoxin B₁, ochratoxin A, zearalenone, and fumonisin B₁ were 0.21, 0.19, 0.09, and 0.24 ng/mL, with detection ranges of 0.47⁻55.69, 0.48⁻127.11, 0.22⁻31.36, and 0.56⁻92.57 ng/mL, respectively. The limit of detection (LOD) of this antibody microarray for aflatoxin B₁, ochratoxin A, zearalenone, and fumonisin B₁ in corn was 5.25, 4.75, 2.25, and 6 μg/kg, respectively. The recovery rates from the spiked samples were between 79.2% and 113.4%, with coefficient of variation <10%. The results of the analysis of commercial samples for mycotoxins using this new assay and the liquid chromatography-tandem mass spectrometry (LC-MS/MS) were comparable and in good agreement. This assay could also be modified for the simultaneous detection of other multiple mycotoxins, as well as low-weight analytes, hazardous to human health.

Designed Strategies for Fluorescence-Based Biosensors for the Detection of Mycotoxins

Small molecule toxins such as mycotoxins with low molecular weight are the most widely studied biological toxins. These biological toxins are responsible for food poisoning and have the potential to be used as biological warfare agents at the toxic dose. Due to the poisonous nature of mycotoxins, effective analysis techniques for quantifying their toxicity are indispensable. In this context, biosensors have been emerged as a powerful tool to monitors toxins at extremely low level. Recently, biosensors based on fluorescence detection have attained special interest with the incorporation of nanomaterials. This review paper will focus on the development of fluorescence-based biosensors for mycotoxin detection, with particular emphasis on their design as well as properties such as sensitivity and specificity. A number of these fluorescent biosensors have shown promising results in food samples for the detection of mycotoxins, suggesting their future potential for food applications.

Affinity Biosensors for Detection of Mycotoxins in Food

This chapter reviews recent achievements in methods of detection of mycotoxins in food. Special focus is on the biosensor technology that utilizes antibodies and nucleic acid aptamers as receptors. Development of biosensors is based on the immobilization of antibodies or aptamers onto various conventional supports like gold layer, but also on nanomaterials such as graphene oxide, carbon nanotubes, and quantum dots that provide an effective platform for achieving high sensitivity of detection using various physical methods, including electrochemical, mass sensitive, and optical. The biosensors developed so far demonstrate high sensitivity typically in subnanomolar limit of detection. Several biosensors have been validated in real samples. The sensitivity of biosensors is similar and, in some cases, even better than traditional analytical methods such as ELISA or chromatography. We believe that future trends will be focused on improving biosensor properties toward practical application in food industry.

Novel Colorimetric Aptasensor for Zearalenone Detection Based on Nontarget-Induced Aptamer Walker, Gold Nanoparticles, and Exonuclease-Assisted Recycling Amplification

Zearalenone (ZEN) toxicity is a significant risk for human beings. Thus, it is of high importance to develop sensitive, precise, and inexpensive analytical methods for ZEN detection, especially in human serum. Here, a colorimetric aptasensor is presented for the determination of ZEN based on the nontarget-induced aptamer walker, catalytic reaction of gold nanoparticles (AuNPs), exonuclease III (Exo III) as a signal amplifier, and 4-nitrophenol as a colorimetric agent. Low amount of ZEN requirement and signal amplification are some of the distinct advantages of the proposed aptasensor. In the absence of ZEN, the aptamer (Apt) starts walking on the AuNP surface with the help of Exo III and binds to multiple complementary strands of aptamer, leading to the change of sample color from yellow to colorless. Upon the addition of ZEN, both the Apt and complementary strand exist as single-stranded DNAs on the surface of AuNPs, resulting in less access of 4-nitrophenol to the surface of AuNPs and less catalytic performance of AuNPs. In this situation, the color of the sample remains yellow (the color of 4-nitrophenol). The presented aptasensor was capable to detect ZEN in a wide linear dynamic range, 20-80 000 ng/L, with a detection limit of 10 ng/L. The prepared sensing strategy was successfully used for ZEN determination in the human serum sample.

Aptamer based fluorometric determination of ATP by exploiting the FRET between carbon dots and graphene oxide

The authors describe a fluorometric aptamer based assay for adenosine triphosphate (ATP). It is based on the use of carbon dots (CDs) and graphene oxide (GO). The resultant CD-aptamer is adsorbed on the surface of GO via π-stacking and hydrophobic interaction, and the fluorescence of CD-aptamer is quenched via fluorescence resonance energy transfer (FRET) between CDs and GO. If ATP is present, it will bind to the aptamer and the CD-aptamer will be desorbed from GO. This will suppress FRET and the fluorescence of the CDs is restored. Under the optimal conditions and at typical excitation/emission wavelengths of 358/455 nm, the assay has a 80 pM detection limit and a linear range that extends from 0.10 to 5.0 nM concentrations of ATP. The method was successfully applied to the determination of ATP in yogurt samples. This method can also be conceivably applied to the detection of other analytes for which appropriate aptamers are available. Graphical abstract Schematic of a novel fluorometric ATP assay based on the fluorescence resonance energy transfer (FRET) between aptamer modified carbon dots (CD-aptamer) and graphene oxide (GO). CD-aptamer was used as the energy donor and molecular recognition probe, and GO acted as energy acceptor. This assay exhibits high sensitivity and selectivity with a detection limit as low as 80 pM.

Nano-Aptasensing in Mycotoxin Analysis: Recent Updates and Progress

Recent years have witnessed an overwhelming integration of nanomaterials in the fabrication of biosensors. Nanomaterials have been incorporated with the objective to achieve better analytical figures of merit in terms of limit of detection, linear range, assays stability, low production cost, etc. Nanomaterials can act as immobilization support, signal amplifier, mediator and artificial enzyme label in the construction of aptasensors. We aim in this work to review the recent progress in mycotoxin analysis. This review emphasizes on the function of the different nanomaterials in aptasensors architecture. We subsequently relate their features to the analytical performance of the given aptasensor towards mycotoxins monitoring. In the same context, a critically analysis and level of success for each nano-aptasensing design will be discussed. Finally, current challenges in nano-aptasensing design for mycotoxin analysis will be highlighted.