Fluorometric lateral flow immunochromatographic zearalenone assay by exploiting a quencher system composed of carbon dots and silver nanoparticles

Quantitative Rapid Magnetic Immunoassay for Sensitive Toxin Detection in Food: Non-Covalent Functionalization of Nanolabels vs. Covalent Immobilization

In this study, we present a novel and ultrasensitive magnetic lateral flow immunoassay (LFIA) tailored for the precise detection of zearalenone, a mycotoxin with significant implications for human and animal health. A versatile and straightforward method for creating non-covalent magnetic labels is proposed and comprehensively compared with a covalent immobilization strategy. We employ the magnetic particle quantification (MPQ) technique for precise detection of the labels and characterization of their functionality, including measuring the antibody sorption density on the particle surface. Through kinetic studies using the label-free spectral phase interferometry, the rate and equilibrium constants for the binding of monoclonal antibodies with free (not bound with carrier protein) zearalenone were determined to be kon = 3.42 × 105 M-1s-1, koff = 7.05 × 10-4 s-1, and KD = 2.06 × 10-9 M. The proposed MPQ-LFIA method exhibits detection limits of 2.3 pg/mL and 7.6 pg/mL when employing magnetic labels based on covalent immobilization and non-covalent sorption, with dynamic ranges of 5.5 and 5 orders, correspondingly. We have successfully demonstrated the effective determination of zearalenone in barley flour samples contaminated with Fusarium graminearum. The ease of use and effectiveness of developed test systems further enhances their value as practical tools for addressing mycotoxin contamination challenges.

Recent Advances in Mycotoxin Determination in Fish Feed Ingredients

Low-cost plant-based sources used in aquaculture diets are prone to the occurrence of animal feed contaminants, which may in certain conditions affect the quality and safety of aquafeeds. Mycotoxins, a toxic group of small organic molecules produced by fungi, comprise a frequently occurring plant-based feed contaminant in aquafeeds. Mycotoxin contamination can potentially cause significant mortality, reduced productivity, and higher disease susceptibility; thus, its timely detection is crucial to the aquaculture industry. The present review summarizes the methodological advances, developed mainly during the past decade, related to mycotoxin detection in aquafeed ingredients, namely analytical, chromatographic, and immunological methodologies, as well as the use of biosensors and spectroscopic methods which are becoming more prevalent. Rapid and accurate mycotoxin detection is and will continue to be crucial to the food industry, animal production, and the environment, resulting in further improvements and developments in mycotoxin detection techniques.

Smartphone-integrated fluorescent quenching immunochromatographic test strips designed for the determination of sesame allergens in food samples

A highly sensitive smartphone-integrated fluorescence quenching immunochromatographic assay (FQICA) for the detection of sesame allergen was proposed. Sesame antibodies were adsorbed on the surface of the gold nanoparticles to form fluorescent acceptors (AuNPs-Ab). Ovalbumin (OVA) protein was labeled with quantum dots (QDs) to form signal probes (QDs-OVA), which were coated on the C-line of the assay strips. A mixture of QDs-OVA and sesame protein was coated on the T-line of the strip. For FQICA, the concentration of the analyte was positively correlated with the fluorescence signal. The developed FQICA had high sensitivity for the detection of sesame protein, and its visual LOD was 80 μg/L and the quantitative LOD was 40 μg/L. In addition, the method had high specificity, except for a small cross-reaction between sesame and walnut. The visual LODs in bread, ham, and biscuits were 640 μg/L. The quantitative LODs were 320 μg/L for biscuits and 640 μg/L for bread and ham. Comparing the developed FQICA with a commercial ELISA kit, the recoveries of sesame protein in both methods were between 80% and 120%.

Recent advances in simultaneous detection strategies for multi-mycotoxins in foods

Mycotoxin contamination has become a challenge in the field of food safety testing, given the increasing emphasis on food safety in recent years. Mycotoxins are widely distributed, in heavily polluted areas. Food contamination with these toxins is difficult to prevent and control. Mycotoxins, as are small-molecule toxic metabolites produced by several species belonging to the genera Aspergillus, Fusarium, and Penicillium growing in food. They are considered teratogenic, carcinogenic, and mutagenic to humans and animals. Food systems are often simultaneously contaminated with multiple mycotoxins. Due to the additive or synergistic toxicological effects caused by the co-existence of multiple mycotoxins, their individual detection requires reliable, accurate, and high-throughput techniques. Currently available, methods for the detection of multiple mycotoxins are mainly based on chromatography, spectroscopy (colorimetry, fluorescence, and surface-enhanced Raman scattering), and electrochemistry. This review provides a comprehensive overview of advances in the multiple detection methods of mycotoxins during the recent 5 years. The principles and features of these techniques are described. The practical applications and challenges associated with assays for multiple detection methods of mycotoxins are summarized. The potential for future development and application is discussed in an effort, to provide standards of references for further research.

An Emerging Fluorescent Carbon Nanobead Label Probe for Lateral Flow Assays and Highly Sensitive Screening of Foodborne Toxins and Pathogenic Bacteria

By virtue of the fascinating merits of low cost, rapid screening, and on-site detection, fluorescence lateral flow assays (FLFAs) have attracted considerable attention. Their detection limits are closely associated with the label probes used. The development of high-performance and robust phosphors remains a great challenge. Herein, we presented a new label probe, i.e., fluorescent carbon nanobeads (FCNBs), for FLFAs. Monodispersive, water-soluble, and highly emissive FCNBs were facilely prepared via a hydrothermal carbonization manner. Their abundant amino groups were beneficial for versatile surface functionalization. After being modified by biomolecules, the fabricated FCNB reporter probes were adopted for the construction of lateral flow test strips toward representative foodborne toxins, i.e., aflatoxin B1 (AFB1), and pathogenic bacteria, i.e., Staphylococcus aureus (S. aureus), respectively. The detection limits (0.01 ng/mL for AFB1 and 10² cfu/mL for S. aureus) were about 1 or 2 orders of magnitude lower than most reported methods. Furthermore, the proposed test strips were successfully applied for the quantitative, accurate, and rapid screening of AFB1 and S. aureus in food samples. This work provided a promising label probe for FLFAs and would open the opportunity to exploit a sensing platform by modifying different ligands onto the FCNBs.

Dual-readout fluorescence quenching immunochromatographic test strips for highly sensitive simultaneous detection of chloramphenicol and amantadine based on gold nanoparticle-triggered photoluminescent nanoswitch control

Herein, a novel fluorescence quenching immunochromatographic test strip (FQICTS) for simultaneous detection of chloramphenicol (CAP) and amantadine (AMD) was developed on the basis of inner filter effect (IFE), with the combination of gold nanoparticles (AuNPs) and highly luminescent green-emitting gold nanoclusters (AuNCs) as the IFE quencher/donor pair. The AuNPs could quench the excitation light and emission light of AuNCs and achieve a high IFE efficiency due to dual spectral overlapping. Under optimal conditions, the "turn-on" mode of the AuNCs-based dual-readout FQICTS showed good linearity for CAP detection in chicken samples from 0.05 ng/g to 10 ng/g, with a limit of detection (LOD) of 0.043 ng/g. The linear range of AMD is 0.5-50 ng/g, with LOD of 0.45 ng/g. The visual LODs of CAP and AMD in "turn-on" mode were 200 and 10 times lower than that in "turn-off" mode, respectively. The "turn-on" mode of FQICTS showed high recovery for detecting CAP (82.5-94.5%) and AMD (81.9-110.7%) spiked into chicken samples. The performance and practicability of the established method were verified with commercial enzyme-immunoassay kits, and good correlations were observed. Overall, the newly developed AuNCs-based dual-readout FQICTS is a promising on-site screening tool for rapid, high-sensitivity detection of multiple food contaminants in practical applications.

Lateral flow immunoassay based on dual spectral-overlapped fluorescence quenching of polydopamine nanospheres for sensitive detection of sulfamethazine

Herein, we propose a lateral flow immunoassay (LFIA) based on the dual spectral-overlapped fluorescence quenching of polydopamine nanospheres (PDANs) caused by the inner filter effect to sensitively detect sulfamethazine (SMZ). The fluorescence quenching LFIA device consists of four parts: absorbent pad, polyvinyl chloride pad, sample pad, and nitrocellulose membrane. Compared with traditional quenchers such as gold nanoparticles (AuNPs) with single spectral-overlapped quenching ability, PDANs can quench the excitation light and emission light of three fluorescence donors (aggregation-induced emission fluorescent microsphere, AIEFM; fluorescent microsphere, FM; and quantum dot bead, QB). The fluorescence intensity changes (ΔF) are numerically larger for PDANs-LFIA (ΔF_AIEFM = 2315, ΔF_FM = 979, ΔF_QB = 910) than those for AuNPs-LFIA (ΔF_AIEFM = 1722, ΔF_FM = 833, ΔF_QB =;520). AIEFM-based PDANs-LFIA exhibits a large ΔF (2315) in response to the changes in the SMZ concentration, and produces a high signal-to-noise ratio. The limit of detection (LOD) and visual LOD of LFIA based on PDANs quenching AIEFM for the detection of SMZ in chicken are 0.043 and 0.5 ng/mL, respectively. The results confirm that the proposed method can be used for the detection of hazardous materials in practical applications.

Quantum dot microsphere-based immunochromatography test strip enabled sensitive and quantitative on-site detections for multiple mycotoxins in grains

In this work, we design a sensitive and quantitative on-site detecting solution for Aflatoxin B1 (AFB1), Ochratoxin A (OTA) and Zearalenone (ZEN) as often found in moldy grains and harmful to human health. Using quantum dot microsphere-based immunochromatography test strip, the proposed method can sensitively detect AFB1, OTA and ZEN in low detection limits of 0.01 ng/mL, 0.2 ng/mL and 0.032 ng/mL, and quantitatively measure their concentrations from 0.01 ng/mL to 1 ng/mL, from 0.2 ng/mL to 200 ng/mL and from 0.032 ng/mL to 32 ng/mL in high accuracy and good selectivity. More importantly, these multiple mycotoxin detections only relying on simple manual operations and portable handheld test strip reader can be finished on site within 45 min. Therefore, the proposed method is a promising solution supporting sensitive and quantitative on-site detections for multiple mycotoxins.

Recent advances in immunoassays and biosensors for mycotoxins detection in feedstuffs and foods

Mycotoxins are secondary metabolites produced by fungus. Many mycotoxin species are highly toxic and are frequently found in cereals and feedstuffs. So, powerful detection methods are vital and effective ways to prevent feed contamination. Traditional detection methods can no longer meet the needs of massive, real-time, simple, and fast mycotoxin monitoring. Rapid detection methods based on advanced material and sensor technology are the future trend. In this review, we highlight recent progress of mycotoxin rapid detection strategies in feedstuffs and foods, especially for simultaneous multiplex mycotoxin determination. Immunoassays, biosensors, and the prominent roles of nanomaterials are introduced. The principles of different types of recognition and signal transduction are explained, and the merits and pitfalls of these methods are compared. Furthermore, limitations and challenges of existing rapid sensing strategies and perspectives of future research are discussed.

Fluorescent nanoparticles as tools in ecology and physiology

Fluorescent nanoparticles (FNPs) have been widely used in chemistry and medicine for decades, but their employment in biology is relatively recent. Past reviews on FNPs have focused on chemical, physical or medical uses, making the extrapolation to biological applications difficult. In biology, FNPs have largely been used for biosensing and molecular tracking. However, concerns over toxicity in early types of FNPs, such as cadmium-containing quantum dots (QDs), may have prevented wide adoption. Recent developments, especially in non-Cd-containing FNPs, have alleviated toxicity problems, facilitating the use of FNPs for addressing ecological, physiological and molecule-level processes in biological research. Standardised protocols from synthesis to application and interdisciplinary approaches are critical for establishing FNPs in the biologists' tool kit. Here, we present an introduction to FNPs, summarise their use in biological applications, and discuss technical issues such as data reliability and biocompatibility. We assess whether biological research can benefit from FNPs and suggest ways in which FNPs can be applied to answer questions in biology. We conclude that FNPs have a great potential for studying various biological processes, especially tracking, sensing and imaging in physiology and ecology.

Immunoassays for rapid mycotoxin detection: state of the art

The widespread presence of mycotoxins in nature not only poses a huge health risk to people in terms of food but also causes incalculable losses to the agricultural economy. As a rapidly developing technology in recent years, the mycotoxin immunoassay technology has approached or even surpassed the traditional chromatography technology in some aspects. Using this approach, the lateral flow immunoassay (LFIA) has attracted the interest of researchers due to its user-friendly operation, short time consumption, little interference, low cost, and ability to process a large number of samples at the same time. This paper provides an overview of the immunogens commonly used for mycotoxins, the development of antibodies, and the use of gold nanoparticles, quantum dots, carbon nanoparticles, enzymes, and fluorescent microsphere labeling materials for the construction of LFIAs to improve detection sensitivity. The analytical performance, detection substrates, detection limits or detection ranges of LFIA for mycotoxins have been listed in recent years. Finally, we describe the future outlook for the field, predicting that portable mobile detection devices and simultaneous quantitative detection of multiple mycotoxins is one of the important directions for future development.

Point-of-care diagnostics for infectious diseases: From methods to devices

The current widespread of COVID-19 all over the world, which is caused by SARS-CoV-2 virus, has again emphasized the importance of development of point-of-care (POC) diagnostics for timely prevention and control of the pandemic. Compared with labor- and time-consuming traditional diagnostic methods, POC diagnostics exhibit several advantages such as faster diagnostic speed, better sensitivity and specificity, lower cost, higher efficiency and ability of on-site detection. To achieve POC diagnostics, developing POC detection methods and correlated POC devices is the key and should be given top priority. The fast development of microfluidics, micro electro-mechanical systems (MEMS) technology, nanotechnology and materials science, have benefited the production of a series of portable, miniaturized, low cost and highly integrated POC devices for POC diagnostics of various infectious diseases. In this review, various POC detection methods for the diagnosis of infectious diseases, including electrochemical biosensors, fluorescence biosensors, surface-enhanced Raman scattering (SERS)-based biosensors, colorimetric biosensors, chemiluminiscence biosensors, surface plasmon resonance (SPR)-based biosensors, and magnetic biosensors, were first summarized. Then, recent progresses in the development of POC devices including lab-on-a-chip (LOC) devices, lab-on-a-disc (LOAD) devices, microfluidic paper-based analytical devices (μPADs), lateral flow devices, miniaturized PCR devices, and isothermal nucleic acid amplification (INAA) devices, were systematically discussed. Finally, the challenges and future perspectives for the design and development of POC detection methods and correlated devices were presented. The ultimate goal of this review is to provide new insights and directions for the future development of POC diagnostics for the management of infectious diseases and contribute to the prevention and control of infectious pandemics like COVID-19.

Patulin and Trichothecene: characteristics, occurrence, toxic effects and detection capabilities via clinical, analytical and nanostructured electrochemical sensing/biosensing assays in foodstuffs

Patulin and Trichothecene as the main groups of mycotoxins in significant quantities can cause health risks from allergic reactions to death on both humans and animals. Accordingly, rapid and highly sensitive determination of these toxics agents is of great importance. This review starts with a comprehensive outlook regarding the characteristics, occurrence and toxic effects of Patulin and Trichothecene. In the following, numerous clinical and analytical approaches have been extensively discussed. The main emphasis of this review is placed on the utilization of novel nanomaterial based electrochemical sensing/biosensing tools for highly sensitive determination of Patulin and Trichothecene. Furthermore, a detailed and comprehensive comparison has been performed between clinical, analytical and sensing methods. Subsequently, the nanomaterial based electrochemical sensing platforms have been approved as reliable tools for on-site analysis of Patulin and Trichothecene in food processing and manufacturing industries. Different nanomaterials in improving the performance of detecting assays were investigated and have various benefits toward clinical and analytical methods. This paper would address the limitations in the current developments as well as the future challenges involved in the successful construction of sensing approaches with the functionalized nanomaterials and also allow exploring into core-research works regarding this area.

A Portable, Label-Free, Reproducible Quartz Crystal Microbalance Immunochip for the Detection of Zearalenone in Food Samples

This research reports a portable immunochip, based on quartz crystal microbalance (QCM) for label-free, low-cost qualitative detection of zearalenone (ZEN) in food samples. The experimental parameters in the functionalization and working process were evaluated in detail, in order to achieve a high accuracy and sensitivity. Under optimal conditions, the ZEN concentration at an inhibition ratio of 50% and 15% of the proposed QCM immunochip achieved 3.41 µg L⁻¹ and 0.37 µg L⁻¹, respectively. This portable QCM immunochip also exhibited high specificity, no obvious cross-reaction to five structural analogs of ZEN, and showed other mycotoxins. It could finish the whole qualitative measurement within 30 min, showed good stability during the processes of preparation (SD < 5%, n = 9), storage (frequency response >90%, in PBS at 4 °C for 15 days), and application (frequency response >90% after being reused 6 times). The developed QCM immunochip obtained accurate and repeatable recovery results in ZEN analysis in the chosen food samples (corn, wheat flour, soy sauce, and milk), which had a high correlation (R² = 0.9844) with that achieved by the HPLC–MS/MS method. In short, this work developed a portable, stable, and reproducible QCM immunochip that could be used for rapid, low-cost, and sensitively measurement of ZEN content in real food samples.

Fluorescent Carbon Quantum Dots-Synthesis,Functionalization and Sensing Application in FoodAnalysis

Carbon quantum dots (CQDs) with stable physicochemical properties are one of theemerging carbon nanomaterials that have been studied in recent years. In addition to the excellentoptical properties such as photoluminescence, photobleaching resistance and light stability, thismaterial also has favorable advantages of good biocompatibility and easy functionalization, whichmake it an ideal raw material for constructing sensing equipment. In addition, CQDs can combinedwith other kinds of materials to form the nanostructured composites with unique properties, whichprovides new insights and ideas for the research of many fields. In the field of food analysis,emerging CQDs have been deeply studied in food composition analysis, detection and monitoringtrace harmful substances and made remarkable research progress. This article introduces andcompares the various methods for CQDs preparation and reviews its related sensing applicationsas a new material in food components analysis and food safety inspection in recent years. It isexpected to provide a significant guidance for the further study of CQDs in the field of foodanalysis and detection. CQDs; synthesis; fluorescent sensing; food analysis.

Development of Lateral Flow Immunochromatographic Assays Using Colloidal Au Sphere and Nanorods as Signal Marker for the Determination of Zearalenone in Cereals

This paper describes the development of lateral flow immunochromatographic assays (ICAs) using colloidal Au sphere (SP) and nanorods (NRs) as signal markers for the determination of zearalenone (ZEN) in cereals. The developed ICAs can detect the analyte ZEN within a short time (10 min), and achieve lower limit of detection (LOD). This is the first time that the AuNRs are used as signal probe in immune test strip for ZEN detection. For colloidal AuSP immunochromatographic analysis (AuSP-ICA), the LODs in solution and spiked cereal sample were 5.0 μg L⁻¹ and 60 μg kg⁻¹, and for AuNRs immunochromatographic analysis (AuNRs-ICA) the two LODs achieved 3.0 μg L⁻¹ and 40 μg kg⁻¹, respectively. These two proposed ICAs have minor cross-reaction to the structural analogs of ZEN, and no cross-reactivity with aflatoxin B₁, T-2 toxin, ochratoxin A, deoxynivalenol, fumonisin B₁. Both of the developed ICAs can specifically and sensitively detect ZEN in cereals, providing an effective strategy for rapid screening and detection of ZEN in a large number of food samples.

Developments in mycotoxin analysis: an update for 2018-19

This review summarises developments on the analysis of various matrices for mycotoxins that have been published in the period from mid-2018 to mid-2019. Analytical methods to determine aflatoxins, Alternaria toxins, ergot alkaloids, fumonisins, ochratoxins, patulin, trichothecenes, and zearalenone are covered in individual sections. Advances in sampling strategies are also discussed in a dedicated section. In addition, developments in multi-mycotoxin methods – including comprehensive mass spectrometric-based methods as well as simple immunoassays – are also reviewed. This critical review aims to briefly present the most important recent developments and trends in mycotoxin determination as well as to address limitations of the presented methodologies.

An aptamer-based fluorometric zearalenone assay using a lighting-up silver nanocluster probe and catalyzed by a hairpin assembly

An enzyme-free fluorometric assay is described for the determination of zearalenone (ZEN). The method combines (a) catalyzed hairpin assembly (CHA), (b) ultrahigh fluorescent light-up G-rich DNA sequences in proximity to silver nanoclusters (Ag NCs), and (c) the use of aptamers (Apt). In the presence of ZEN, the inhibit sequence (Inh) is released from the aptamer-trigger sequence (Apt-T) via the binding of ZEN and the aptamer of Apt-T. The free Apt-T acts as a switch that opens the hairpins H1 and H2 to generate H1-H2 complex. The released Apt-T is available to trigger the next round of CHA between H1 and H2. Finally, the hybridization between H1 and the Ag NCs probe (P) causes the G-rich sequence to be in close proximity to the dark Ag NCs encapsulated by P. This leads to highly efficient lighting up of the Ag NCs and the production of amplified fluorescence with excitation/emission peaks at 575/628 nm. Under the optimized conditions, a linear correlation was observed with concentrations ranging from 1.3 pg mL^-1 to 100 ng mL^-1, and the limit of detection was 0.32 pg mL^-1 (at S/N = 3). The method was successfully validated by analyzing maize and beer for levels of ZEN after a simple sample preparation procedure. Graphical abstractSchematic of the assay. The inhibit sequence (Inh) is released from aptamer-trigger sequence (Apt-T) via binding of ZEN and aptamer. The free Apt-T triggers catalyzed hairpin assembly (CHA).G-rich DNA is in proximity to silver nanoclusters (Ag NCs) and fluorescence intensity increases to detect ZEN.

Electrochemiluminescent competitive immunoassay for zearalenone based on the use of a mimotope peptide, Ru(II)(bpy)3-loaded NiFe2O4 nanotubes and TiO2 mesocrystals

An ultrasensitive competitive-type electrochemiluminescence immunoassay for the mycotoxin zearalenone is described. The method is based on the use of (a) a mimotope peptide that was selected from a phage displayed peptide library and used to substitute ZEN for designing the competitive assay; (b) NiFe₂O₄ nanotubes with large specific surface area loaded with the ECL probe Ru(bpy)₃²⁺; and (c) poly(vinylpyrrolidone) (PVP)-assisted synthesis of TiO₂ mesocrystals that acts as the sensing platform and support for antibody immobilization. Under the optimized conditions and at an ECL working potential of 1.1 V, a linear response is found for ZEN in the 0.1 to 1.0 × 10^-5 ng·mL^-1 concentration range with a detection limit as low as 3.3 fg·mL^-1. Graphical abstract An ultrasensitive competitive-type electrochemiluminescence (ECL) immunosensor based on mimotope peptide was constructed for the detection of Zearalenone.

Sensitivity enhancement in lateral flow assays: a systems perspective

Lateral flow assays (LFAs) are rapid, inexpensive, easy-to-manufacture and -use tests widely employed in medical and environmental applications, particularly in low resource settings. Historically, LFAs have been stigmatized as having limited sensitivity. However, as their global usage expands, extensive research has demonstrated that it is possible to substantially improve LFA sensitivity without sacrificing their advantages. In this critical review, we have compiled state-of-the-art approaches to LFA sensitivity enhancement. Moreover, we have organized and evaluated these approaches from a system-level perspective, as we have observed that the advantages and disadvantages of each approach have arisen from the integrated and tightly interconnected chemical, physical, and optical properties of LFAs.

Fluorescent microbeads for point-of-care testing: a review

Microbead-based point-of-care testing (POCT) has demonstrated great promise in translating detection modalities from bench-side to bed-side. This is due to the ease of visualization, high surface area-to-volume ratio of beads for efficient target binding, and efficient encoding capability for simultaneous detection of multiple analytes. This review (with 112 references) summarizes the progress made in the field of fluorescent microbead-based POCT. Following an introduction into the field, a first large section sums up techniques and materials for preparing microbeads, typically of dye-labelled particles, various kinds of quantum dots and upconversion materials. Further subsections cover the encapsulation of nanoparticles into microbeads, decoration of nanoparticles on microbeads, and in situ embedding of nanoparticles during microbead synthesis. A next large section summarizes microbead-based fluorometric POCT, with subsections on detection of nucleic acids, proteins, circulating tumor cells and bacteria. A further section covers emerging POCT based on the use of smartphones or flexible microchips. The last section gives conclusions and an outlook on current challenges and possible solutions. Aside from giving an overview on the state of the art, we expect this article to boost the further development of POCT technology. Graphical Abstract Schematic presentation of the fabrication of microbeads, the detection targets of interest including bacteria, circulating tumor cells (CTCs), protein and nucleic acid, and the emerging point-of-care testing (POCT) platform. The colored wheels of the bus represent the fluorescent materials embedded in (red color) or decorated on the surface of microbeads (green color).

Developments in mycotoxin analysis: an update for 2017-2018

This review summarises developments that have been published in the period from mid-2017 to mid-2018 on the analysis of various matrices for mycotoxins. Analytical methods to determine aflatoxins, Alternaria toxins, ergot alkaloids, fumonisins, ochratoxins, patulin, trichothecenes, and zearalenone are covered in individual sections. Advances in sampling strategies are discussed in a dedicated section, as are methods used to analyse botanicals and spices, and newly developed comprehensive liquid chromatographic-mass spectrometric based multi-mycotoxin methods. This critical review aims to briefly discuss the most important recent developments and trends in mycotoxin determination as well as to address limitations of the presented methodologies.