Fluorometric determination of microRNA-122 by using ExoIII-aided recycling amplification and polythymine induced formation of copper nanoparticles

A label-free and rapid fluorometric strategy for microRNA detection using CRISPR-Cas12a coupled with copper nanoparticles

CRISPR-Cas12a with robust trans-cleavage activity were employed to mitigate background fluorescence signal, achieving sensitive detection of miRNA-21. The activation of trans-cleavage activity of Cas12a was achieved by utilizing cDNA as a trigger. Upon the presence of target miRNA-21, cDNA hybridizes with it forming a DNA/RNA double-stranded structure. Exonuclease III (ExoIII) facilitates the degradation of cDNA, releasing the target for subsequent cycles. Due to cDNA degradation, the trans-cleavage activity of Cas12a remains unactivated and does not disrupt the synthesis template of copper nanoparticles. Addition of Cu2+ and AA leads to the formation of highly fluorescent copper nanoparticles. Conversely, in absence of miRNA-21, intact cDNA activates trans-cleavage activity of Cas12a, resulting in degradation of the synthesis template and failure in synthesizing fluorescent copper nanoparticles. This method exhibits excellent selectivity with a low limit of detection (LOD) at 5 pM. Furthermore, we successfully applied this approach to determine miRNA-21 in cell lysates and human serum samples, providing a new approach for sensitive determination of biomarkers in biochemical research and disease diagnosis.

A highly sensitive colorimetric DNA sensor for MicroRNA-155 detection: leveraging the peroxidase-like activity of copper nanoparticles in a double amplification strategy

A novel and highly sensitive colorimetric DNA sensor for determination of miRNA-155 at attomolar levelsis presented that combines the peroxidase-like activity of copper nanoparticles (CuNPs) with the hybridization chain reaction (HCR) . The utilization of CuNPs offers advantages such as strong interaction with double-stranded DNA, excellent molecular recognition, and mimic catalytic activity. Herein, a capture probe DNA (P1) was immobilized on carboxylated magnetic beads (MBs), allowing for amplified immobilization due to the 3D surface. Subsequently, the presence of the target microRNA-155 led to the formation of a sandwich structure (P2/microRNA-155/P1/MBs) when P2 was introduced to the modified P1/MBs. The HCR reaction was then triggered by adding H1 and H2 to create a super sandwich (H1/H2)n. Following this, Cu2+ ions were attracted to the negatively charged phosphate groups of the (H1/H2)n and reduced by ascorbic acid, resulting in the formation of CuNPs, which were embedded into the grooves of the (H1/H2)n. The peroxidase-like activity of CuNPs catalyzed the oxidation reaction of 3,3',5,5'-Tetramethylbenzidine (TMB), resulting in a distinct blue color measured at 630 nm. Under optimal conditions, the colorimetric biosensor exhibited a linear response to microRNA-155 concentrations ranging from 80 to 500 aM, with a detection limit of 22 aM, and discriminate against other microRNAs. It was also successfully applied to the determination of microRNA-155 levels in spiked human serum.

Quantitation of MicroRNA-155 in Human Cells by Heterogeneous Enzyme-Linked Oligonucleotide Assay Coupled with Mismatched Catalytic Hairpin Assembly Reaction

In the present work, we describe the development of a chemiluminescent enzyme-linked oligonucleotide assay coupled with mismatched catalytic hairpin assembly (mCHA) amplification for the quantitative determination of microRNA-155. To improve its sensitivity, a polymerase-free mCHA reaction was applied as an isothermal amplification method. The detection limit of the proposed assay was 400 fM. In addition, the high specificity of the assay was demonstrated. The proposed assay allowed assessment of the content of microRNA-155 in human cancer lines such as HepG2, Caco2, MCF7, and HeLa. The quantitation of microRNA-155 was performed after purification of short RNAs (less than 200 nt) from cell lysates since a high matrix effect was observed without this pre-treatment. The results of the quantitative determination of the microRNA content in cells were normalized using nematode microRNA-39, the concentration of which was determined using a heterogeneous assay developed by us using a strategy identical to that of the microRNA-155 assay.

Modern Methods for Assessment of microRNAs

The review discusses modern methods for the quantitative and semi-quantitative analysis of miRNAs, which are small non-coding RNAs affecting numerous biological processes such as development, differentiation, metabolism, and immune response. miRNAs are considered as promising biomarkers in the diagnosis of various diseases.

A label-free cyclic amplification strategy for microRNA detection by coupling graphene oxide-controlled adsorption with superlong poly(thymine)-hosted fluorescent copper nanoparticles

Herein, based on a terminal deoxynucleotidyl transferase (TdT)-mediated superlong poly-T-templated-copper nanoparticles (poly T-CuNPs) strategy, a simple, universal and label-free fluorescent biosensor for the detection of miRNA was constructed by employing graphene oxide (GO) and DNase I. In this strategy, GO and DNase I were used as a switch and amplifier of the signal generation pathway, respectively, and the fluorescence of poly T-CuNPs was used as the signal output. In the presence of target miRNA, the DNA dissociated from the GO surface by forming a miRNA/DNA duplex and was degraded by DNase I. The short oligos with 3'-OH, the product of DNase I degradation, could be recognized by the TdT and added to a long poly-T tail. Finally, the fluorescence signal was output through the synthesis of poly T-CuNPs. As a proof of concept, let-7a was analyzed. The method showed good sensitivity and selectivity with a linear response in the 50 pM-10,000 pM let-7a concentration range and a 30 pM limit of detection (LOD = 30 pM, R² = 0.9954, the relative standard deviation were 2.79%-5.30%). It was also successfully applied to the determination of miRNA in spiked human serum samples. It showed good linearity in the range of 500-10000 pM (R² = 0.9969, the relative standard deviation were 1.61%-3.85%). Moreover, both the adsorption of GO and the degradation of DNase I are DNA sequence-independent; thus, this method can be applied to the detection of any miRNA simply by changing the assisted-DNA sequence.

Graphene-based fluorometric determination of agrD gene transcription in methicillin-resistant Staphylococcus aureus using exonuclease III-aided target recycling and DNA walker cascade amplification

A graphene-based bioassay is described for the fluorometric determination of agrD gene transcription (mRNA) in methicillin-resistant Staphylococcus aureus (MRSA). This method includes exonuclease III (Exo III)-assisted target recycling and DNA walker cascade amplification. Hairpin1 (HP1) consists of a capture probe (CP) and DNA walker sequence. In the absence of the target, 5'-amino modified hairpin2 (HP2) labeled with carboxyfluorescein (FAM) at its 3' terminus is covalently linked to graphene via 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide and N-hydroxysuccinimide (EDC/NHS) catalysis, resulting in the quenching of the FAM signal. The stem-loop structure of HP1 opens when the target is added to form partially complementary DNA/RNA hybrids. Exo III then initiates the target recycling process by cleaving the CP and DNA walker cascade reaction by automatic walking. This iterative reaction causes the FAM to dissociate from the graphene, and the fluorescence can be measured at excitation/emission wavelengths of 480/514 nm. Therefore, the target can be assayed by fluorescence. This method has a linear relationship with the concentration of target within the range 1 fM to 100 pM with a detection limit of 1 fM. The developed bioassay was used to monitor biofilm formation and investigate the mechanism of drug action with satisfactory results. Schematic representation of the graphene-based fluorescent bioassay for agrD gene transcription in methicillin-resistant Staphylococcus aureus by using exonuclease III-aided target recycling and DNA walker cascade amplification.

Copper nanoclusters: designed synthesis, structural diversity, and multiplatform applications

Atomically precise metal nanoclusters (MNCs) have gained tremendous research interest in recent years due to their extraordinary properties. The molecular-like properties that originate from the quantized electronic states provide novel opportunities for the construction of unique nanomaterials possessing rich molecular-like absorption, luminescence, and magnetic properties. The field of monolayer-protected metal nanoclusters, especially copper, with well-defined molecular structures and compositions, is relatively new, about two to three decades old. Nevertheless, the massive progress in the field illustrates the importance of such nanoobjects as promising materials for various applications. In this respect, nanocluster-based catalysts have become very popular, showing high efficiencies and activities for the catalytic conversion of chemical compounds. Biomedical applications of clusters are an active research field aimed at finding better fluorescent contrast agents, therapeutic pharmaceuticals for the treatment and prevention of diseases, the early diagnosis of cancers and other potent diseases, especially at early stages. A huge library of structures and the compositions of copper nanoclusters (CuNCs) with atomic precisions have already been discovered during last few decades; however, there are many concerns to be addressed and questions to be answered. Hopefully, in future, with the combined efforts of material scientists, inorganic chemists, and computational scientists, a thorough understanding of the unique molecular-like properties of metal nanoclusters will be achieved. This, on the other hand, will allow the interdisciplinary researchers to design novel catalysts, biosensors, or therapeutic agents using highly structured, atomically precise, and stable CuNCs. Thus, we hope this review will guide the reader through the field of CuNCs, while discussing the main achievements and improvements, along with challenges and drawbacks that one needs to face and overcome.

DNA-Tetrahedral-Nanostructure-Based Entropy-Driven Amplifier for High-Performance Photoelectrochemical Biosensing

In virtue of the inherent molecular recognition and programmability, DNA has recently become the most promising for high-performance biosensors. The rationally engineered nucleic acid architecture will be very advantageous to hybridization efficiency, specificity, and sensitivity. Herein, a robust and split-mode photoelectrochemical (PEC) biosensor for miRNA-196a was developed based on an entropy-driven tetrahedral DNA (EDTD) amplifier coupled with superparamagnetic nanostructures. The DNA tetrahedron structure features in rigidity and structural stability that contribute to obtain precise identification units and specific orientations, improving the hybridization efficiency, sensitivity, and selectivity of the as-designed PEC biosensor. Further, superparamagnetic Fe₃O₄@SiO₂@CdS particles integrated with DNA nanostructures are beneficial for the construction of a split-mode, highly selective, and reliable PEC biosensor. Particularly, the enzyme- and hairpin-free EDTD amplifier eliminates unnecessary interference from the complex secondary structure of pseudoknots or kissing loops in typical hairpin DNAs, significantly lowers the background noise, and improves the detection sensitivity. This PEC biosensor is capable of monitoring miRNA-196a in practical settings with additional advantages of efficient electrode fabrication, stability, and reproducibility. This strategy can be extended to various miRNA assays in complex biological systems with excellent performance.

Exonuclease III-assisted signal amplification strategy for sensitive fluorescence detection of polynucleotide kinase based on poly(thymine)-templated copper nanoparticles

A sensitive and label-free fluorometric method has been developed for the determination of polynucleotide kinase (PNK) activity, by employing exonuclease III (Exo III)-assisted cyclic signal amplification and poly(thymine)-templated copper nanoparticles (polyT-CuNPs). In the presence of PNK, cDNA with 5'-hydroxyl termini was phosphorylated and then hybridized with tDNA to form the cDNA/tDNA duplex, which subsequently triggered the λ exonuclease cleavage reaction, eventually resulting in the release of tDNA. The released tDNA could unfold the hairpin structure of HP DNA to generate partially complementary duplex (tDNA/HP DNA), wherein the HP DNA possessed T-rich sequences (T30) and tDNA recognition sequence. With the help of Exo III digestion, the tDNA was able to initiate the cycle for the generation of T-rich sequences, the template for the formation of fluorescent CuNPs. Conversely, the cDNA could not be cleaved by λ exonuclease without PNK and individual HP DNA could not be hydrolyzed by Exo III. The T-rich sequence was caged in HP DNA, resulting in a weak fluorescence signal. Under optimized conditions, the fluorescence intensity was linearly correlated to a concentration range of 0.001 to 1 U mL-1 with a low detection limit of 2 × 10-4 U mL-1. Considering the intriguing analytical performance, this approach could be explored to screen T4 PNK inhibitors and hold promising applications in drug discovery and disease therapy.

Fluorometric determination of microRNA using arched probe-mediated isothermal exponential amplification combined with DNA-templated silver nanoclusters

A highly sensitive fluorometric method is described for the determination of microRNA-141. It is based on the use of arched probe-mediated isothermal exponential amplification reaction (EXPAR) and of DNA-templated silver nanoclusters (DNA-AgNCs). The EXPAR utilizes microRNA-141 as the trigger, polymerases and endonucleases as amplification activators, and two arched probes as exponential amplification templates. This enables the conversion of microRNA to a large number of reporter sequences under isothermal conditions within minutes. The generated reporter sequences act as scaffolds for the synthesis of fluorescent DNA-AgNCs by reduction of Ag (I) with NaBH₄. The DNA-AgNCs function as signalling fluorophores with excitation/emission maxima at 540/610 nm. The method exhibits high sensitivity for microRNA-141 with a detection limit as low as 0.87 fM and a dynamic range from 1 fM to 500 fM. The method can distinguish nucleotides in the microRNA-200 family. Graphical abstract Schematic representation of a fluorometric method for sensitive detection of microRNA based on arched probe-mediated isothermal exponential amplification combined with DNA-templated silver nanoclusters.

An CuInS2 photocathode for the sensitive photoelectrochemical determination of microRNA-21 based on DNA-protein interaction and exonuclease III assisted target recycling amplification

A photocathode is described for the determination of microRNA-21 by using CuInS₂ as an active photocathode material. Exonuclease III assisted target recycling amplification was employed to enhance the detection sensitivity. The TATA-binding protein (TBP) was applied to enhance steric hindrance which decreases the photoelectrochemical intensity. This strategy is designed by combining the anti-interference photocathode material, enzyme assisted target recycling amplification and TBP induced signal off, showing remarkable amplification efficiency. Under the optimized conditions, the detection limit for microRNA-21 is as low as 0.47 fM, and a linear range was got from 1.0 × 10^-15 M to 1.0 × 10^-6 M. Graphical abstract Schematic representation of sensitive photoelectrochemical detection of microRNA-21.CuInS₂ is used as an active photocathode material. Combined Exonuclease III assisted target recycling amplification and TATA-binding protein decreased of photoelectrochemical intensity, the detection limit was 0.47 fM with good selectivity. (miR-21: microRNA-21; CS: chitosan).

Recent advances on nanomaterials-based fluorimetric approaches for microRNAs detection

MicroRNAs are types of small single-stranded endogenous highly conserved non-coding RNAs, which play main regulatory functions in a wide range of cellular and physiological events, such as proliferation, differentiation, neoplastic transformation, and cell regeneration. Recent findings have proved a close association between microRNAs expression and the development of many diseases, indicating the importance of microRNAs as clinical biomarkers and targets for drug discovery. However, due to a number of prominent characteristics like small size, high sequence similarity and low abundance, sensitive and selective identification of microRNAs has rather been a hardship through routine traditional assays, including quantitative polymerase chain reaction, microarrays, and northern blotting analysis. More recently, the soaring progression in nanotechnology and fluorimetric methodologies in combination with nanomaterials have promised microRNAs detection with high sensitivity, efficiency and selectivity, excellent reproducibility and lower cost. Therefore, this review will represent an overview of latest advances in microRNAs detection through nanomaterials-based fluorescent methods, like gold nanoparticles, silver and copper nanoclusters, graphene oxide, and magnetic silicon nanoparticles.

Graphene oxide-based fluorometric determination of microRNA-141 using rolling circle amplification and exonuclease III-aided recycling amplification

A graphene oxide-based method has been developed for ultrasensitive and selective determination of microRNA-141 by means of rolling circle amplification (RCA) and exonuclease III (Exo III)-assisted recycling amplification. The method uses (a) a padlock probe with a hybrid sequence that is complementary to the target microRNA-141 at both the 5'- and the 3'-end, and (b) a long binding region of a signalling reporter strand. On addition of microRNA-141, it acts as the primer for triggering the RCA reaction following ligation. This results in the formation of a repeatedly concatenated sequence of the padlock probe. Subsequently, the RCA product hybridizes with the fluorescein-labelled signal strand to form the duplex DNA containing the blunt 3'-termini of signal strand. Addition of Exo III causes signal strand digestion and leads to RCA product recycling and liberation of fluorescein. Added graphene oxide does not absorb the fluorescein liberated because of the poor mutual interaction. Therefore, microRNA-141 can be quantified by measurement of the green fluorescence under excitation/emission wavelengths of 470/520 nm. The method has a 100 aM detection limit towards microRNA-141 and works in the wide range from 1 fM to 1 nM. It can discriminate even single-mismatched microRNA and shows good selectivity and sensitivity when applied to spiked human serum. Graphical abstract Schematic representation of a graphene oxide (GO)-based method for fluorometric determination of microRNA by using rolling circle amplification and exonuclease III (Exo III)-aided recycling amplification. With microRNA, the fluorescein-labelled signal strand becomes digested, and this genererates a fluorescent signal.

A general scheme for fluorometric detection of multiple oligonucleotides by using RNA-cleaving DNAzymes: application to the determination of microRNA-141 and H5N1 virus DNA

A widely applicably method is described for fluorometric determination of targets such as microRNA and viral DNA. It is making use of a Mg(II)-dependent DNAzyme and a G-quadruplex. In the absence of analyte, an inactive DNAzyme is formed by the hybridization of split DNAzymes and substrate. On addition of target analyte, the end of each strand of the split DNAzymes bind the analyte. This leads to the generation of an active DNAzyme. In the presence of Mg(II), the activated DNAzyme is formed and can cleave the substrate strand. Hence, the caged G-quadruplex sequences will be released. These released G-quadruplexes combine with thioflavin T to generate a G-quadruplex/thioflavin T complex and thereby cause amplified fluorescence. The method shows a 70 pM detection limit for H5N1 and works over a wide linear range 1 nM to 400 nM. Conceivably, this detection scheme has a wide scope in that it may be applied to other assays for microRNAs and DNAs by variation of the type of DNAzyme. Graphical abstract Schematic presentation of target detection: the DNAzyme cannot cleave the substrate strand when target is absent. Once the target is added, the active DNAzyme can cleave the substrate strand in the presence of Mg²⁺, resulting in significant fluorescence enhancement when the release of the caged G-quadruplex sequences binding with 2-[4-(dimethylamino)phenyl]-3,6-dimethylbenzothiazolium chloride (ThT).