A review on nanomaterial-modified optical fiber sensors for gases, vapors and ions

The roles of templates consisting of amino acids in the synthesis and application of gold nanoclusters

Gold nanoclusters (AuNCs) with low toxicity, high photostability, and facile synthesis have attracted great attention. The ligand is of great significance in stabilizing AuNCs and regulating their properties. Ligands consisting of amino acids (proteins and peptides) are an ideal template for synthesizing applicative AuNCs due to their inherent bioactivity, biocompatibility, and accessibility. In this review, we summarize the correlation of the template consisting of amino acids with the properties of AuNCs by analyzing different peptide sequences. The selection of amino acids can regulate the fluorescence excitation/emission and intensity, size, cell uptake, and light absorption. By analyzing the role played by AuNCs stabilized by proteins and peptides in the application, universal rules and detailed performances of sensors, antibacterial agents, therapeutic reagents, and light absorbers are reviewed. This review can guide the template design and application of AuNCs when selecting proteins and peptides as ligands.

Surface Bragg gratings of proteins patterned on integrated waveguides for (bio)chemical analysis

The incorporation of biomacromolecules onto silicon waveguiding microstructures constitutes a growing trend that pushes towards compact and miniaturized biosensing systems. This paper presents the integration of one-dimensional periodic nanostructures of proteins on the surface of micrometric silicon waveguides for transducing binding events between biomacromolecules. The study demonstrates this new bioanalytical principle by experimental results and theoretical calculations, and proves that rib waveguides (1--1.6-µm width) together with protein gratings (495--515-nm period) display suitable spectral responses for this optical biosensing system. Protein assemblies of bovine serum albumin are fabricated on the surface of silicon nitride waveguides, characterized by electron microscopy, and their response is measured by optical frequency domain reflectometry along the fabrication process and the subsequent stages of the biorecognition assays. Detection and quantification limits of 0.3 and 3.7 µg·mL-1, respectively, of specific antibodies are inferred from experimental dose-response curves. Among other interesting features, the results of this study point towards new miniaturized and integrated sensors for label-free bioanalysis.

Advanced Integration of Glutathione-Functionalized Optical Fiber SPR Sensor for Ultra-Sensitive Detection of Lead Ions

It is crucial to detect Pb2+ accurately and rapidly. This work proposes an ultra-sensitive optical fiber surface plasmon resonance (SPR) sensor functionalized with glutathione (GSH) for label-free detection of the ultra-low Pb2+ concentration, in which the refractive index (RI) sensitivity of the multimode-singlemode-multimode (MSM) hetero-core fiber is largely enhanced by the gold nanoparticles (AuNPs)/Au film coupling SPR effect. The GSH is modified on the fiber as the sensing probe to capture and identify Pb2+ specifically. Its working principle is that the Pb2+ chemically reacts with deprotonated carboxyl groups in GSH through ligand bonding, resulting in the formation of stable and specific chelates, inducing the variation of the local RI on the sensor surface, which in turn leads to the SPR wavelength shift in the transmission spectrum. Attributing to the AuNPs, both the Au substrates can be fully functionalized with the GSH molecules as the probes, which largely increases the number of active sites for Pb2+ trapping. Combined with the SPR effect, the sensor achieves a sensitivity of 2.32 × 1011 nm/M and a limit of detection (LOD) of 0.43 pM. It also demonstrates exceptional specificity, stability, and reproducibility, making it suitable for various applications in water pollution, biomedicine, and food safety.

Paper-Based Humidity Sensors as Promising Flexible Devices, State of the Art, Part 2: Humidity-Sensor Performances

This review article covers all types of paper-based humidity sensor, such as capacitive, resistive, impedance, fiber-optic, mass-sensitive, microwave, and RFID (radio-frequency identification) humidity sensors. The parameters of these sensors and the materials involved in their research and development, such as carbon nanotubes, graphene, semiconductors, and polymers, are comprehensively detailed, with a special focus on the advantages/disadvantages from an application perspective. Numerous technological/design approaches to the optimization of the performances of the sensors are considered, along with some non-conventional approaches. The review ends with a detailed analysis of the current problems encountered in the development of paper-based humidity sensors, supported by some solutions.

Optical Properties of a Tapered Optical Fiber Coated with Alkanes Doped with Fe3O4 Nanoparticles

The presented research shows the possibilities of creating in-line magnetic sensors based on the detection of changes of light propagation parameters, especially polarization, obtained by mixing Fe₃O₄ nanoparticles with hexadecane (higher alkane) surrounding a biconical optical fiber taper. The fiber optic taper allows to directly influence light parameters inside the taper without the necessity to lead the beam out of the structure. The mixture of hexadecane and Fe₃O₄ nanoparticles forms a special cladding surrounding a fiber taper which can be controlled by external factors such as the magnetic field. Described studies show changes of transmission (power, loss) and polarization properties like azimuth, and ellipticity, depending on the location of the mixture on sections of tapered optical fiber. The taper was made of a standard single-mode telecommunication fiber, stretched out to a length of 20.0 ± 0.5 mm and the diameter of the tapers is around 15.0 ± 0.3 μm, with the loss lower than 0.5 dB @ 1550 nm. Such a taper causes the beam to leak out of the waist structure and allows the addition of the external beam-controlling cladding material. The presented research can be used to build polarization switches or optical sensor. The results show that it can be a new way to control the propagation parameters of a light beam using tapered optical fiber and magnetic mixture.

Sensors for Volatile Organic Compounds

This paper provides an overview of recent developments in the field of volatile organic compound (VOC) sensors, which are finding uses in healthcare, safety, environmental monitoring, food and agriculture, oil industry, and other fields. It starts by briefly explaining the basics of VOC sensing and reviewing the currently available and quickly progressing VOC sensing approaches. It then discusses the main trends in materials' design with special attention to nanostructuring and nanohybridization. Emerging sensing materials and strategies are highlighted and their involvement in the different types of sensing technologies is discussed, including optical, electrical, and gravimetric sensors. The review also provides detailed discussions about the main limitations of the field and offers potential solutions. The status of the field and suggestions of promising directions for future development are summarized.

A room temperature all-optical sensor based on two-dimensional SnS2 for highly sensitive and reversible NO2 sensing

Fiber-optic gas sensors have been considered a low-cost, effective, and robust approach for monitoring nitrogen dioxide (NO₂) gas which is a major toxic gaseous pollutant. The integration of functional nanoscale materials provides additional dimensions for realizing ultra-sensitive and selective NO₂ detection, however, the trade-off is the need for sophisticated photonic structures or external non-optical peripherals (e.g. electrical heaters). In this work, we demonstrate the development of a room temperature, all-optical, and high-performance NO₂ sensor based on a simple D-shaped optical fiber incorporated with ultra-thin two-dimensional (2D) tin disulfide (SnS₂). A visible light source at 473 nm is used to power the optical fiber, and at the same time excite the 2D SnS₂ layer via the evanescent field, to generate extra charge carriers. Upon exposure to NO₂ at room temperature, the physisorbed gas molecules induce charge exchange with the 2D SnS₂. This significantly re-distributes the photo-excited charge carriers in the ultra-thin material, therefore manipulating the corresponding optical absorption and scattering. As a result, the optical output power intensity varies as the sensor output through the evanescent field coupling. This all-optical sensor demonstrates an optical power variation of up to 7 µW upon the exposure of NO₂ gas at a low concentration of 50 ppb. This response is fully reversible with an extremely low limit of detection (LOD) of 0.464 ppb. We consider that this work provides a feasible and simple solution to realize high-performance optical gas sensors without the integration of external non-optical peripherals for effective monitoring of environmentally hazardous gases.

Fast-Response Oxygen Optical Fiber Sensor based on PEA2 SnI4 Perovskite with Extremely Low Limit of Detection

Oxygen sensor is an important technique in various applications including industrial process control, medical equipment, biological fabrication, etc. The reported optical fiber-based configurations so far, using gas-sensitive coating do not meet the stringent performance targets, such as fast response time and low limit of detection (LOD). Tin-based halide perovskites are sensitive to oxygen with potential use for sensor applications. Here, the halide perovskite-based oxygen optical fiber sensor by combining phenylethylammonium tin iodide (PEA₂ SnI₄ ) and tilted fiber Bragg grating (TFBG) is demonstrated. The PEA₂ SnI₄ -based oxygen optical fiber sensor is reversible at room temperature with a response time of about 10 s, and the experimental LOD approaches to an extremely low oxygen concentration of about 50 ppm. The as-fabricated oxygen sensor shows a relative response change of 0.6 dB for an oxygen concentration increase from 50 ppm to 5% with good gas selection against NO₂ , CO, CO₂ , H₂ . This work extends the sensor applications of halide perovskites, providing a novel technique for rapid and repeatable oxygen gas detection at a low level.

A Ratiometric Fiber Optic Sensor Based on CdTe QDs Functionalized with Glutathione and Mercaptopropionic Acid for On-Site Monitoring of Antibiotic Ciprofloxacin in Aquaculture Water

A ratiometric fluorescence fiber-optical sensor system (RFFS) merging a Y-type optical fiber spectrometer and CdTe QDs composite functionalized with glutathione and mercaptopropionic acid (GMPA@CdTe-QDs) for highly selective and on-site detection of ciprofloxacin (CIP) in environmental water samples was designed. Our preliminary results suggested that the red fluorescence of the synthesized GMPA@CdTe-QDs was effectively quenched by CIP. Based on this, the RFFS/GMPA@CdTe-QDs system was successfully fabricated and used for highly selective and rapid detection of CIP on site in the concentration range from 0 to 45 μM with the detection limit of 0.90 μM. The established method exhibited good interference resistance to the analogues of CIP and provided a great potential platform for real-time detection of CIP residues in environmental water. In addition, the fluorescence quenching mechanism of GMPA@CdTe-QDs by CIP was also investigated by means of temperature effect, fluorescence lifetime, ultraviolet (UV) visible absorption, and fluorescent spectra. Our results suggested clearly that the red fluorescence of GMPA@CdTe-QDs was quenched by CIP via the photoinduced electron-transfer (PET) mode.

Green and sustainable cellulose-derived humidity sensors: A review

Cellulose, as the most abundant natural polysaccharide, is an excellent material for developing green humidity sensors, especially due to its humidity responsiveness as a result of its rich hydrophilic groups. In combination with other components including carbon materials and polymers, cellulose and its derivatives can be used to design high-performance humidity sensors that meet various application requirements. This review summarizes the recent advances in the field of various cellulose-derived humidity sensors, with particular attention paid to different sensing mechanisms including resistance, capacitance, colorimetry and gravity, and so on. Furthermore, the roles of cellulose and its derivatives are highlighted. This work may promote the development of cellulose-derived humidity sensors, as well as other cellulose-based intelligent materials.

A Review: Application and Implementation of Optic Fibre Sensors for Gas Detection

At the present time, there are major concerns regarding global warming and the possible catastrophic influence of greenhouse gases on climate change has spurred the research community to investigate and develop new gas-sensing methods and devices for remote and continuous sensing. Furthermore, there are a myriad of workplaces, such as petrochemical and pharmacological industries, where reliable remote gas tests are needed so that operatives have a safe working environment. The authors have concentrated their efforts on optical fibre sensing of gases, as we became aware of their increasing range of applications. Optical fibre gas sensors are capable of remote sensing, working in various environments, and have the potential to outperform conventional metal oxide semiconductor (MOS) gas sensors. Researchers are studying a number of configurations and mechanisms to detect specific gases and ways to enhance their performances. Evidence is growing that optical fibre gas sensors are superior in a number of ways, and are likely to replace MOS gas sensors in some application areas. All sensors use a transducer to produce chemical selectivity by means of an overlay coating material that yields a binding reaction. A number of different structural designs have been, and are, under investigation. Examples include tilted Bragg gratings and long period gratings embedded in optical fibres, as well as surface plasmon resonance and intra-cavity absorption. The authors believe that a review of optical fibre gas sensing is now timely and appropriate, as it will assist current researchers and encourage research into new photonic methods and techniques.

Glutathione-functionalized long-period fiber gratings sensor based on surface plasmon resonance for detection of As3+ ions

Development of simple and accurate methods for the detection of As³⁺is highly desirable and technically important. In this work, a highly sensitive and selective long-period fiber gratings sensor based on surface plasmon resonance was developed for As³⁺detection by designing glutathione-functionalized Au nanoparticles as a signal amplification tag. Based on the chemical interaction between As³⁺and glutathione, the self-assembling glutathione on the surface of the gold film combines selectively with As³⁺, and then anchors the glutathione-functionalized Au nanoparticles, which changes the refractive index of the surrounding environment, resulting in a shift of the transmission spectrum. Results show that the sensor could detect As³⁺with concentrations ranging from 0.02 to 2 ppb. The sensor exhibited excellent specificity for As³⁺against other metal ions, such as Na⁺, Fe³⁺, Mg²⁺, Cu²⁺, Pb²⁺, Ni²⁺, Ba²⁺, and Co³⁺. The fiber sensor was successfully employed to detect As³⁺in pond water samples, demonstrating that it has the potential for As³⁺detection with the advantages of low cost, high sensitivity, and a simple structure.

Induced Birefringence by Drop Cast in EFBG Ammonia Sensors

In this paper, an induced birefringence was observed on an ammonia sensor based on an etched fiber Bragg grating (EFBG) coated with an organic film. The film was prepared with a solution of the perylene derivative, along with the copolymer PCDTBT in chlorobenzene. The EFBG was coated by drop cast technique, and a split in the reflection band, characteristic of birefringence, was observed after deposition. The response of the two observed peaks as a function of time was modeled by a pair of exponentials that could represent two processes: adsorption followed by diffusion of the gas molecules in the microstructured film. Such phenomena alter the boundary conditions of the optical fiber propagating mode, which allows an indirect ammonia detection by monitoring the EFBG wavelength shift of the reflected peaks. The sensor was experimentally tested in a concentration range from 3 ppm to 41,700 ppm, and the calibrations curves were determined in a range from 27 ppm to 6960 ppm. The two observed peaks showed different sensitivities, which presents an intrinsic potential for multiparameter measurements. The split in the reflection band was hypothesized to be birefringence induced by the formation of an asymmetric film. This hypothesis was numerically evaluated and compared with the experimental results.

An Overview of Artificial Olfaction Systems with a Focus on Surface Plasmon Resonance for the Analysis of Volatile Organic Compounds

The last three decades have witnessed an increasing demand for novel analytical tools for the analysis of gases including odorants and volatile organic compounds (VOCs) in various domains. Traditional techniques such as gas chromatography coupled with mass spectrometry, although very efficient, present several drawbacks. Such a context has incited the research and industrial communities to work on the development of alternative technologies such as artificial olfaction systems, including gas sensors, olfactory biosensors and electronic noses (eNs). A wide variety of these systems have been designed using chemiresistive, electrochemical, acoustic or optical transducers. Among optical transduction systems, surface plasmon resonance (SPR) has been extensively studied thanks to its attractive features (high sensitivity, label free, real-time measurements). In this paper, we present an overview of the advances in the development of artificial olfaction systems with a focus on their development based on propagating SPR with different coupling configurations, including prism coupler, wave guide, and grating.

Beyond near-infrared lossy mode resonances with fluoride glass optical fiber

The objective of this Letter consists of the exploration of the lossy mode resonance (LMR) phenomenon beyond the near-infrared region and specifically in the short wave infrared region (SWIR) and medium wave infrared region (MWIR). The experimental and theoretical results show for the first time, to the best of our knowledge, not only LMRs in these regions, but also the utilization of fluoride glass optical fiber associated with this phenomenon. The fabricated devices consist of a nanometric thin-film of titanium dioxide used as LMR generating material, which probed extraordinary sensitivities to external refractive index (RI) variations. RI sensitivity was studied in the SWIR and MWIR under different conditions, such as the LMR wavelength range or the order of resonance, showing a tremendous potential for the detection of minute concentrations of gaseous or biological compounds in different media.

Self-powered and high-performance all-fiber integrated photodetector based on graphene/palladium diselenide heterostructures

An all-fiber integrated photodetector is proposed and demonstrated by assembling a graphene/palladium diselenide (PdSe₂) Van der Waals heterostructure onto the endface of a standard optical fiber. A gold film is covered on the heterostructure working as an electrode and a mirror, which reflects back the unabsorbed residual light for further reusage. Owing to the low bandgap of PdSe₂, the all-fiber photodetector shows a broadband photoresponse from 650 to 1550 nm with a high photoresponsivity of 6.68×10⁴ AW^-1, enabling a low light detection of 42.5 pW. And the fastest temporal response is about 660 µs. Taking advantage of heterostructures, the photodetector can work in self-powered mode with the on/off ratio about 82. These findings provide new strategies for integrating two-dimensional materials into optical fibers to realize integrated all-fiber devices with multi-function applications.

Fiber Optic Gas Sensors Based on Lossy Mode Resonances and Sensing Materials Used Therefor: A Comprehensive Review

Pollution in cities induces harmful effects on human health, which continuously increases the global demand of gas sensors for air quality control and monitoring. In the same manner, the industrial sector requests new gas sensors for their productive processes. Moreover, the association between exhaled gases and a wide range of diseases or health conditions opens the door for new diagnostic applications. The large number of applications for gas sensors has permitted the development of multiple sensing technologies. Among them, optical fiber gas sensors enable their utilization in remote locations, confined spaces or hostile environments as well as corrosive or explosive atmospheres. Particularly, Lossy Mode Resonance (LMR)-based optical fiber sensors employ the traditional metal oxides used for gas sensing purposes for the generation of the resonances. Some research has been conducted on the development of LMR-based optical fiber gas sensors; however, they have not been fully exploited yet and offer optimal possibilities for improvement. This review gives the reader a complete overview of the works focused on the utilization of LMR-based optical fiber sensors for gas sensing applications, summarizing the materials used for the development of these sensors as well as the fabrication procedures and the performance of these devices.

Temperature-controlled resistive sensing of gaseous H2S or NO2 by using flower-like palladium-doped SnO2 nanomaterials

Palladium-doped SnO₂ nanomaterials, with palladium in fractions from 0 to 10 mol% were hydrothermally synthesized and characterized by XRD, FESEM, TEM, and XPS. Their gas sensing properties were studied in two temperature ranges of 75-95 °C and 160-210 °C. The sensor using 5 mol% Pd-doped SnO₂ exhibits temperature-dependent sensing property. NO₂ can be detected at 80 °C, while H₂S is preferably detected at 180 °C. The response to 10 ppm H₂S is 50 times higher than that of the undoped sample. Its detection limit is 500 ppb. For NO₂, the sensor exhibited strong response and a lower detection limit of 20 ppb. In view of the selective detection of H₂S and NO₂ by regulating the temperature, palladium-doped SnO₂ has great prospects in the detection of H₂S and NO₂. Graphical abstract Schematic of the gas sensing mechanism of the S-5% Pd doped SnO_2.

The impact of ZnO configuration as an external layer on the sensitivity of a bi-layer coated polymer optical fiber probe

Salinity magnitude changes are a critical factor for determining the chemistry of natural water bodies and biological processes. Label-free refractive index sensors are promising devices for detecting these changes. A polymer optical fiber (POF) sensor modified with cladding treatment and a bi-layer zinc oxide/silver (ZnO/Ag) nanostructure coating to determine sodium chloride concentration changes through refractive index variations in water is experimentally demonstrated. The use of three ZnO nanostructure shapes, nanoparticles and horizontally and vertically oriented nanorods, as an external layer and a broad spectrum light source from the visible (Vis) to the near infrared (NIR) region are investigated to achieve optimum sensitivity. The rms roughness, optical band-gap and zeta potential (ZP) value for the vertically oriented sample are 148 nm, 3.19 eV and 5.96 mV, respectively. In the NIR region the wavelength-intensity sensitivity values of probes coated with ZnO nanoparticles and horizontally and vertically oriented nanorods are 104 nm RIU-1-12 dB RIU-1, 63 nm RIU-1-10 dB RIU-1 and 146 nm RIU-1-22 dB RIU-1, respectively, and in the Vis area the values are 65 nm RIU-1-14 dB RIU-1, 58 nm RIU-1-11 dB RIU-1 and 89 nm RIU-1-23 dB RIU-1, respectively. The maximum amplitude sensitivity is obtained for the probe coated with vertically aligned ZnO nanorods in the NIR area due to the deeper penetration of evanescent waves, a higher surface-volume ratio, better crystallinity, more adhesive interactions with salt molecules, larger surface roughness and higher-order dispersion compared to the other coated ZnO nanostructures.

An efficient tool for the continuous monitoring on adsorption of sub-ppm level gaseous benzene using an automated analytical system based on thermal desorption-gas chromatography/mass spectrometry approach

It became an important task to effectively adsorb volatile organic compounds (VOCs) at or near real-world levels for efficient control of airborne pollution in ambient environments. Nonetheless, most studies carried out previously for the control of VOCs are confined to significantly polluted conditions (e.g., >100 ppm) that are far different from real-world or ambient conditions. To help acquire the meaningful data for the adsorptive removal of VOCs at near real-world levels, a new approach was designed and implemented to measure adsorption of gaseous benzene (as a representative or model VOC) at trace-level quantities (as low as 0.14 ng (0.43 ppb) for a 100 mL sample) using activated carbon (sieved to 212 μm mesh size) as a model sorbent. With the aid of a thermal desorption-gas chromatography/mass spectrometry system, the key adsorption performance metrics (such as 10% breakthrough volume (10% BTV) points: 10% as the key reference) were determined: 1018 L atm g^-1 at 0.1 ppm benzene with the corresponding partition coefficient of 3.85 mol kg^-1 Pa^-1. If the adsorption capacity values (at 10% BTV) are compared across the varying concentration levels of benzene, the maximum value of 1.07 mg g^-1 was observed at 1 ppm benzene (within the concentration range selected in this work). As such, it was possible to quantitatively assess the sorbate-sorbent interactions at significantly low concentrations of VOCs that actually prevail under the near real-world conditions.