Colorimetric determination of ascorbic acid using a polyallylamine-stabilized IrO2/graphene oxide nanozyme as a peroxidase mimic

Sensitive electrochemical detection of methimazole based on a unique copper and exfoliated graphene oxide nanocomposite

Herein, we report the creation of a novel sensitive electrochemical sensing platform based on a copper and exfoliated graphene oxide (Cu-eGO) nanocomposite using a facile synthesis technique, which simultaneously removes the sodium ions that result from the exfoliation process to generate eGO from graphite. This novel Cu-eGO nanocomposite was characterized via SEM, EDX, Raman and XPS. The Cu-eGO/GCE exhibited much greater activity for the electrochemical oxidation of methimazole than the eGO/GCE or bare GCE. The electrochemical properties and kinetics involved in the oxidation of methimazole at the Cu-eGO were examined using voltammetry and electrochemical impedance spectroscopy (EIS). This Cu-eGO based sensing platform demonstrated high sensitivity at 1.32 μAμM-1cm-2, a low limit of detection at 0.06 μM, robust stability, and strong anti-interference against potential interferents that may exist in biological systems for the detection of methimazole. The developed electrochemical sensor was successfully employed in blood serum samples that mimicked real biological environments, showing its high applicability.

Enhancing Growth in Vigna radiata through the Inhibition of Charcoal Rot Disease: A Strategic Approach Using Plant Growth-Promoting Rhizobacteria

Macrophomina phaseolina is a vital seed and soil-borne phytopathogen responsible for substantial crop yield losses. Although various methods exist for managing soil-borne pathogens, such as agronomic practices, chemical treatments, and varietal tolerance, biological control utilizing plant growth-promoting rhizobacteria (PGPR) or their secondary metabolites presents promising avenues. In this study, a screening of 150 isolates from the rhizosphere of Vigna radiata L. was conducted to identify strains capable of promoting host growth and controlling charcoal rot disease. Among the tested isolates, only 15 strains demonstrated the ability to produce plant growth-related metabolites, including indole acetic acid, hydrogen cyanide, ammonia, and lytic enzymes, and solubilize inorganic phosphate. Subsequently, these potent strains were evaluated for their antifungal activity against Macrophomina phaseolina in vitro. Three strains, namely MRP-7 (58% growth inhibition), MRP-12 (55% growth inhibition), and MRP-8 (44% growth inhibition), exhibited the highest percent growth inhibition (PGI.). Furthermore, a pot experiment demonstrated that the selected strains acted as effective growth promoters and ROS (reactive oxygen species) scavengers, and served as potential biocontrol agents, significantly reducing the incidence of charcoal rot disease and improving various agronomic attributes of the host plant. These findings highlight the potential of these strains to be utilized as biofertilizers and biocontrol agents for sustainable agricultural practices.

Recent advances in metal oxide nanozyme-based optical biosensors for food safety assays

Metal oxide nanozymes are emerging as promising materials for food safety detection, offering several advantages over natural enzymes, including superior stability, cost-effectiveness, large-scale production capability, customisable functionality, design options, and ease of modification. Optical biosensors based on metal oxide nanozymes have significantly accelerated the advancement of analytical research, facilitating the rapid, effortless, efficient, and precise detection and characterisation of contaminants in food. However, few reviews have focused on the application of optical biosensors based on metal oxide nanozymes for food safety detection. In this review, the catalytic mechanisms of the catalase, oxidase, peroxidase, and superoxide dismutase activities of metal oxide nanozymes are characterized. Research developments in optical biosensors based on metal oxide nanozymes, including colorimetric, fluorescent, chemiluminescent, and surface-enhanced Raman scattering biosensors, are comprehensively summarized. The application of metal oxide nanozyme-based biosensors for the detection of nitrites, sulphites, metal ions, pesticides, antibiotics, antioxidants, foodborne pathogens, toxins, and other food contaminants has been highlighted. Furthermore, the challenges and future development prospects of metal oxide nanozymes for sensing applications are discussed. This review offers insights and inspiration for further investigations on optical biosensors based on metal oxide nanozymes for food safety detection.

Dual-mode colorimetric and photothermal aptasensor for detection of kanamycin using flocculent platinum nanoparticles

Chitosan (CS)-stabilized platinum nanoparticles (CS/PtNPs) were employed to develop a novel aptamer-based dual-mode colorimetric and photothermal biosensor for selective detection of kanamycin (KAN). As a peroxidase-like catalyst, the CS/PtNPs showed outstanding catalytic activity for the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of hydrogen peroxide (H2O2). As a stabilizing agent, CS excelled at fixing the KAN binding aptamer on the surface of the CS/PtNPs, amplifying their catalytic activity and enhancing colloidal dispersion and stability. The oxidized TMB (TMBox) functioned as a signal for the colorimetric, photothermal aptasensor because of its observable absorbance of light in the visible and near-infrared (NIR) regions. When light from a NIR laser was absorbed by the TMBox in the reaction solution, heat was generated in inverse proportion to the KAN concentration. The developed colorimetric and photothermal modes of the aptasensor showed a linear detection range of 0.1-50 and 0.5-50 μM, with a limit of detection (LOD) of 0.04 and 0.41 μM, respectively. Moreover, the aptasensor successfully determined KAN concentrations in spiked milk samples, verifying the reliability and reproducibility in practical applications. The dual-mode aptasensor based on CS/PtNPs for KAN detection, utilizing both color change and heat generation signals through a single probe (TMBox), demonstrates rapid response, simplicity in operation, cost-effectiveness, and high sensitivity. In addition, unlike typical immunoassays, this aptamer-based peroxidase-like nanozyme activation and inhibition strategy required no washing process, which was very effective in terms of reducing the time required for an assay and sustaining a high sensitivity.

Polydopamine on Copper-Doped Cerium Dioxide Nanosheets as Peroxidase Mimics for the Intelligent Detection of Cholesterol

The catalytic ability of nanozymes has become an enzymology hotspot in the field of application. Most nanozymes were characterized to simultaneously have oxidase-like and peroxidase-like activities, but the practical application often focuses on certain activity; other complex activities may cause interference. The peroxidase-like activity (POD-like activity) of nanozymes have been widely used in the colorimetric detection of H2O2 or substances producing H2O2 as an intermediate, such as the detection of small biological molecules with the oxidative reaction of a chromogenic reagent in the presence of POD-like nanozymes. In this work, we used polydopamine (PDA) as the surface coating of Cu-CeO2 nanosheets (PDA@ Cu-CeO2), which enhanced peroxidase-like activity while inhibiting their oxidase-like activity, providing a feasible method for the sensitive determination of cholesterol by integrating visual colorimetric detection and a smartphone application as a readout. The absorbance intensity and RGB values displayed a linear range on cholesterol from 0.05 to 1.2 mM with the LOD (limit of detection) of 42.7 and 99.4 μM. In addition, the method is expected to apply in detecting cholesterol in human serum with acceptable accuracy.

MXene-based nanomaterials with enzyme-like properties for biomedical applications

Recently, great progress has been made in nanozyme research due to the rapid development of nanomaterials and nanotechnology. MXene-based nanomaterials have gained considerable attention owing to their unique physicochemical properties. They have been found to have high enzyme-like properties, such as peroxidase, oxidase, catalase, and superoxide dismutase. In this mini-review, we present an overview of the recent progress in MXene-based nanozymes, with emphasis on their synthetic methods, hybridization, bio-catalytic properties, and biomedical applications. The future challenges and prospects of MXene-based nanozymes are also proposed.

Highly Active Single-Atom Nanozymes with High-Loading Iridium for Sensitive Detection of Pesticides

Single-atom nanozymes (SAzymes) are novel mimic-enzyme materials with atomically doped active sites. They play a pivotal role in the field of nanozymes because of their excellent catalytic activities, high utilization efficiency of the metal atoms, and simple model of active sites. Herein, the peroxidase (POD)-like SAzymes with high-loading iridium (Ir) (5.31%) on graphene oxide (GO) nanosheets [Ir(III)/GO] were prepared through a coordination reaction between the Ir(III) complex and the oxygen-containing groups in GO. The preparation strategy avoids nitrogen doping and pyrolysis procedures which are the usually used strategies to improve the GO-based enzyme mimic activity. Ascribed to the highly active Ir atoms, Ir(III)/GO SAzymes demonstrate outstanding POD-like activity without the oxidase-like activity. In advantage of the excellent POD-like activity, a simple and sensitive colorimetric pesticide detection platform is established. The developed sensing platform offers an excellent "switch-on" pirimicarb (PIB) detection in the linear range of 10-300 nM with a limit of detection (LOD) of 2.81 nM. Moreover, the detection platform was fabricated into a portable test kit, which is composed of a test swab and sample processing tube. In the aid of a color-reading APP, the test kit can detect PIB with the LOD of 3.31 nM. It is astonishing to get this excellent detection sensitivity just using the simple colorimetric strategy. This work not only provides a novel strategy to synthesize Ir-based SAzymes but also exhibits the super capability of Ir(III)/GO in the biosensing field.

Apta-sensor for selective determination of dopamine using chitosan-stabilized Prussian blue nanoparticles

Chitosan-stabilized Prussian blue nanoparticles (CS/PBNPs) were fabricated by a simple synthetic method and used to develop a novel aptamer-based colorimetric assay for selective determination of dopamine (DA). Scanning electron microscopy (SEM) images exhibited a uniform shape of the CS/PBNPs with an average diameter of 37.0 ± 3.2 nm. The CS/PBNPs exhibited strong peroxidase-like activity that catalyzed the reaction between 3,3',5,5'-tetramethylbenzidine (TMB) and hydrogen peroxide (H₂O₂). Chitosan was used for stabilization of the PBNPs and fixation of the DA aptamer on the surface of the CS/PBNPs. The catalytic mechanism of the CS/PBNPs was confirmed to involve first the decomposition of H₂O₂ into a hydroxyl radical (˙OH) and then oxidation of TMB by the ˙OH to produce a blue color. An aptamer-based colorimetric assay was made with the CS/PBNPs to detect DA at concentrations of 0.25-100 μM with a limit of detection (LOD) of 0.16 μM. For comparison, a gold nanoparticle (AuNP)-based apta-sensor detected DA in concentrations of 1-25 μM with a LOD of 0.55 μM. The recovery results of DA concentrations (0.25, 0.5, and 1 μM) from spiked human serum were 92.6%, 102.1%, and 103.9%, verifying the reliability and reproducibility of the CS/PBNP-based apta-sensor for determination of DA level in clinical applications. Moreover, compared to traditional immunoassay, this aptamer-based nanozyme activation/inhibition system needs no washing step, which is very useful to shorten the assay time and maintain high sensitivity.

Yolk-shell structured nanoreactor Au@Co3O4/CeO2@mSiO2 with superior peroxidase-like activity as nanozyme for ultra-sensitive colorimetric biosensing

For yolk-shell structured nanoreactors, multiple active components can be precisely positioned on core and/or shell that can afford more exposed accessible active sites, and the internal voids can guarantee sufficient contact of reactants and catalysts. In this work, a unique yolk-shell structured nanoreactor Au@Co₃O₄/CeO₂@mSiO₂ was fabricated and applied as nanozyme for biosensing. The Au@Co₃O₄/CeO₂@mSiO₂ exhibited superior peroxidase-like activity with a lower Michaelis constant (K_m) and a higher affinity to H₂O₂. The enhanced peroxidase-like activity was attributed to the unique structure and the synergistic effects between the multiple active components. Colorimetric essays were developed based on Au@Co₃O₄/CeO₂@mSiO₂ for the ultra-sensitive sensing of glucose in the range of 3.9 nM-1.03 mM with the limit of detection as low as 3.2 nM. In the detection of glucose-6-phosphate dehydrogenase (G6PD), the cooperation between G6PD and Au@Co₃O₄/CeO₂@mSiO₂ triggered the redox cycling between NAD⁺ and NADH, thereby achieving the amplification of the signal and enhancing the sensitivity of the assay. The assay showed superior performance as compared to other methods with linear response of 5.0 × 10^-3-15 mU mL^-1 and lower detection limit of 3.6 × 10^-3 mU mL^-1. The fabricated novel multi-enzyme catalytical cascade reaction system allowed rapid and sensitive biodetection, demonstrating its potential in biosensors and biomedical applications.

Pd nanoparticles stabilized by bitter gourd polysaccharide with peroxidase properties for H2O2 detection

The development of nanozymes using noble metal nanoparticles to replace natural peroxidase in bio-related detection has been gain great interest. Noble metal nanoparticles with small size have large specific surface area. However, small noble metal nanoparticles tend to aggregate without stabilizer. In this paper, small Pd nanoparticles (3-6 nm) stabilized by bitter gourd polysaccharide (Pd_n-BGP NPs) were prepared by using bitter gourd polysaccharide as reducing agent and stabilizing agent. Pd₂₅-BGP NPs had peroxidase-like catalytic property. And the catalytic kinetics of Pd₂₅-BGP NPs towards substrates conformed to the Michaelis-Menten equation. Furthermore, a method was established to detect H₂O₂ using Pd₂₅-BGP NPs. The linear range and detection limit of this method was 20-320 μM and 2.04 μM, respectively. Finally, Pd₂₅-BGP NPs had good biocompatibility when the concentration was less than 80 μg/mL. The prepared Pd nanoparticles with high stability showed their good prospect in H₂O₂ detection.

Recent advances in colorimetric sensors based on nanozymes with peroxidase-like activity

Nanozymes have been widely used to construct colorimetric sensors due to their advantages of cost-effectiveness, high stability, good biocompatibility, and ease of modification. The emergence of nanozymes greatly enhanced the detection sensitivity and stability of the colorimetric sensing platform. Recent significant research has focused on designing various sensors based on nanozymes with peroxidase-like activity for colorimetric analysis. However, with the deepening of research, nanozymes with peroxidase-like activity has also exposed some problems, such as weak affinity and low catalytic activity. In view of the above issues, existing investigations have shown that the catalytic properties of nanozymes can be improved by adding surface modification and changing the structure of nanomaterials. In this review, we summarize the recent trends and advances of colorimetric sensors based on several typical nanozymes with peroxidase-like activities, including noble metals, metal oxides, metal sulfides/metal selenides, and carbon and metal-organic frameworks (MOF). Finally, the current challenges and prospects of colorimetric sensors based on nanozymes with peroxidase-like activity are summarized and discussed to provide a reference for researchers in related fields.

CeO2–Co3O4 nanocomposite with oxidase-like activity for colorimetric detection of ascorbic acid†

A CeO₂–Co₃O₄ nanocomposite (NC) was prepared and characterized by scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy and X-ray diffraction. The obtained CeO₂–Co₃O₄ NC displayed biomimicking oxidase-like activity, which can catalytically oxidize the 3, 3′, 5, 5′-tetramethylbenzidine (TMB) substrate from colorless to the blue oxidized TMB (ox-TMB) product with a characteristic absorption peak at 652 nm. When ascorbic acid (AA) was present, ox-TMB would be reduced, resulting in a lighter blue and lower absorbance. On the basis of these facts, a simple colorimetric method for detection of AA was established with a linear relationship ranging from 1.0 to 500 μM and a detection limit of 0.25 μM. When this method was used to detect AA in human serum and commercially available vitamin C tablet samples, a good recovery of 92.0% to 109.0% was obtained. Besides, the catalytic oxidation mechanism was investigated, and the possible catalytic mechanism of CeO₂–Co₃O₄ NC can be described as follows. TMB is adsorbed on the CeO₂–Co₃O₄ NC surface and provides lone-pair electrons to the CeO₂–Co₃O₄ NC, leading to an increase in electron density of the CeO₂–Co₃O₄ NC. An increased electron density can improve the electron transfer rate between TMB and the oxygen absorbed on its surface to generate O₂˙⁻ and ˙O₂, which further oxidize TMB.

A CeO₂–Co₃O₄ nanocomposite (NC) was prepared and characterized by scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy and X-ray diffraction.

Intrinsic Light-Activated Oxidase Mimicking Activity of Conductive Polyaniline Nanofibers: A Class of Metal-Free Nanozyme

In recent decades, studies have focused on inorganic nanozymes to overcome the intrinsic drawbacks of bioenzymes due to the demands of improving the reaction conditions and lack of robustness to harsh environmental factors. Many biochemical reactions catalyzed by enzymes require light activation. Light-activated nanozymes have distinct advantages, including being regulated by light stimuli, activating the molecular oxygen to produce reactive oxygen species (ROS) without interfering supplementary oxidants, and often showing a synergistic effect to catalyze some challenging reactions. Only a few studies have been done on this connection. Therefore, it is still a big challenge to develop a nanozyme regulated by light activation. Herein, we uncovered the light-activated oxidase mimicking activity of a conducting polymer polyaniline nanofibers (PANI-NFs). PANI-NFs exhibit intrinsic light-activated brilliant oxidase-like activity, can catalyze the colorless tetramethyl benzidine (TMB) to produce a blue product TMBox, and have a distinct K_m = 0.087 mM and a high V_max = 2.32 μM min^-1 value, measured by using Hanes-Woolf kinetics. We also report the light-activated oxidase activity of some other renowned carbocatalysts graphene oxide and graphitic carbon nitride and compare them with PANI-NFs. This type of property shown by the conductive polymer is amazing. The density functional theory is used to verify the stability and the mode of adsorption of the PANI NFs-TMB composite, which corroborates the experimental results. Furthermore, the current nanozyme demonstrated a significant ability to kill both Gram-negative and Gram-positive bacteria as well as effectively destroy biofilms under physiological conditions. We believe that this work provides the motivation to create a link between optoelectronics and biological activity in the near future.

Fe3O4@Au-metal organic framework nanozyme with peroxidase-like activity and its application for colorimetric ascorbic acid detection

A free radical scavenging system based on Fe₃O₄@Au/MOF-ABTS˙⁺ has formed the basis of a novel method for the highly sensitive and specific spectrophotometric determination of ascorbic acid (AA). The Fe₃O₄@Au/MOF nanozyme with magnetic separation properties was effectively prepared and evaluated using an environmentally friendly technique. Nanomaterials have the advantages of superparamagnetism, biocompatibility, chemical stability, and enhanced synergistic peroxidase-like activity, which can be utilized in catalysis to oxidise the peroxidase substrate 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) into a green-colored product in the presence of H₂O₂. AA as an antioxidant has scavenging effects on ABTS radicals and can reduce green ABTS˙⁺ to uncolored ABTS^2-, contributing to a substantial reduction in green color. Based on such a premise, a highly selective and sensitive chromogenic sensing method depending on the peroxidase-like activity of the nanocomposites was developed in order to achieve the efficient detection of AA in real samples. Under optimum conditions, the proposed technique had a detection range of 0.001-0.1 mmol L^-1, a limit of detection of 0.098 μmol L^-1, and a detection time of only 30 seconds. The newly proposed colorimetric analysis method devoid of enzymes has broad application potential in the areas of quality control and quality and safety detection.

Synthesis of Cu-doped carbon dot/chitosan film composite as a catalyst for the colorimetric detection of hydrogen peroxide and glucose

The use of colloidal nanoparticles suffers from the drawbacks of potential color interference and substrate-induced aggregation. To overcome the limitations, a catalyst was developed by crosslinking Cu-doped carbon dots (Cu-CDs) with chitosan. Cu-CDs with high peroxidase activity were prepared by using a rapid microwave-assisted method. The Cu-CDs containing 6.88% of Cu had an average particle size of 2.25 nm and exhibited 9% of fluorescence quantum yield. The nanozyme/film composite was prepared by crosslinking between the amino groups of Cu-CDs and those of chitosan via a glutaraldehyde linker. A H₂O₂-mediated tetramethylbenzidine (TMB) oxidation reaction was use to evaluate the peroxidase activity of the film. Based on the TMB color changes, colorimetric assays were developed for the detection of H₂O₂ and glucose at an absorption wavelength 652 nm. Under the optimal conditions, the linear ranges for H₂O₂ and glucose were 0.625–40 µM and 1.9–125 µM, respectively, and the detection limits were 0.12 µM and 0.69 µM, respectively. The colorimetric assay was also applied to analyze diluted human serum samples spiked with glucose. Furthermore, this biodegradable, non-toxic, and easy-to-handle nanozyme composite could be stored for over 4 weeks without a significant decrease in activity.

Methyl viologen induced fluorescence quenching of CdTe quantum dots for highly sensitive and selective "off-on" sensing of ascorbic acid through redox reaction

A turn-on fluorescent sensor based on CdTe quantum dots (QDs) is designed for highly sensitive and selective ascorbic acid (AA) detection. CdTe shows a strong emission centered at 578 nm. When assembled with poly(sodium 4-styrenesulfonate) (PSS) and methyl viologen (Mv²⁺) through electrostatic interaction, the emission is found to be effectively quenched. In the presence of AA, Mv²⁺ is reduced to Mv⁺, making the fluorescence of CdTe QDs restored. Under the optimal conditions, the proposed AA sensing method shows a linear proportional response from 0.8 µM to 20 µM, with the detecting limit as low as 50 nM. The developed method was successfully applied in the analysis of AA in human serum samples and cell lysates with satisfactory results.

A highly sensitive switch-on spectrofluorometric method for determination of ascorbic acid using a selective eco-friendly approach

Ascorbic acid has recently been extensively used due to its role in the management of COVID-19 infections by stimulating the immune system and triggering phagocytosis of the corona virus. The currently used spectrofluorometric methods for determination of ascorbic acid require using derivatizing agents or fluorescent probes and suffer from a number of limitations, including slow reaction rates, low yield, limited sensitivity, long reaction times and high temperatures. In this work, we present a highly sensitive spectrofluorometric method for determination of ascorbic acid by switching-on the fluorescence of salicylate in presence of iron (III) due to a reduction of the cation to iron (II). The addition of ascorbic acid resulted in a corresponding enhancement in the fluorescence intensity of iron (III)-salicylate complex at emission wavelength = 411 nm. The method was found linear in the range of 1-8 µg/mL with a correlation coefficient of 0.9997. The limits of detection and quantitation were 0.035 µg/mL and 0.106 µg/mL, respectively. The developed method was applied for the determination of ascorbic acid in the commercially available dosage form; Ruta C60® tablets. The obtained results were compared with those obtained by a reported liquid chromatographic method at 95% confidence interval, no statistically significant differences were found between the developed and the reported methods. Yet, the developed spectrofluorometric method was found markedly greener than the reference method, based on the analytical Eco-scale and the green analytical procedure index. This work presents a simple, rapid and sensitive method that can possibly be applied for determination of ascorbic acid in pharmaceuticals, biological fluids and food samples.

Template-Regulated Bimetallic Sulfide Nanozymes with High Specificity and Activity for Visual Colorimetric Detection of Cellular H2O2

For the past several decades, most of the research studies on nanozymes have been aimed at improving their catalytic activity and diversity; however, developing nanozymes with strong catalytic activity and great specificity remains a challenge. Herein, a simple and efficient template synthesis method was used to synthesize bimetallic sulfide nanoparticles, NiCo₂S₄ NPs, and prove that they have excellent peroxidase-like activity with good specificity. By regulating polyvinyl pyrrolidone (PVP) and hexadecyl trimethyl ammonium bromide as the templating agent, we have obtained the NiCo₂S₄ (PVP) NPs with a high Ni/Co ratio, thus exhibiting superior peroxidase activity. In addition, the NiCo₂S₄ NPs selectively catalyzed and oxidized colorless 3,3,5,5-tetramethylbenzidine (TMB). On being treated with H₂O₂, TMB turns blue while other substrates did not undergo the oxidation reaction under the same conditions, such as 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium (ABTS) and dopamine. The high specificity of NiCo₂S₄ NPs is due to the strong electrostatic driving coordination between negatively charged NiCo₂S₄ NPs and positively charged TMB. Due to the peroxidase activity of the developed NiCo₂S₄ NPs, a simple, low-cost, and reliable colorimetric method was established. Simultaneously, this method for in situ quantitative monitoring of H₂O₂ produced by MDA-MB-231 cells was also achieved. This study has provided a theoretical basis for the improvement of the activity and specificity of bimetallic sulfide nanozymes and may offer guidance for the further reasonable design of related materials.

Ce-MOF with Intrinsic Haloperoxidase-Like Activity for Ratiometric Colorimetric Detection of Hydrogen Peroxide

Metal–organic framework (MOF) nanozymes, as emerging members of the nanozymes, have received more and more attention due to their composition and structural characteristics. In this work, we report that mixed-valence state Ce-MOF (MVCM) has intrinsic haloperoxidase-mimicking activity. MVCM was synthesized by partial oxidation method using Ce-MOF as a precursor. In the presence of H₂O₂ and Br⁻, MVCM can catalyze oxidative bromination of chromogenic substrate phenol red (PR) to produce the blue product bromophenol blue (Br₄PR), showing good haloperoxidase-like activity. Because of the special chromogenic substrate, we constructed a ratiometric colorimetric-sensing platform by detecting the absorbance of the MVCM-(PR, Br⁻) system at wavelengths of 590 and 430, for quantifying H₂O₂, where the detection limit of the H₂O₂ is 3.25 μM. In addition, the haloperoxidase-mimicking mechanism of the MVCM is proposed. Moreover, through enzyme kinetics monitoring, the K_m (H₂O₂ and NH₄Br) of the MVCM is lower than that of cerium oxide nanomaterials, indicating that the MVCM has a stronger binding affinity for H₂O₂ and NH₄Br than other materials. This work provides more application prospects for the development of nanozymes in the field of biosensors in the future.

Pulsed Laser in Liquids Made Nanomaterials for Catalysis

Catalysis is essential to modern life and has a huge economic impact. The development of new catalysts critically depends on synthetic methods that enable the preparation of tailored nanomaterials. Pulsed laser in liquids synthesis can produce uniform, multicomponent, nonequilibrium nanomaterials with independently and precisely controlled properties, such as size, composition, morphology, defect density, and atomistic structure within the nanoparticle and at its surface. We cover the fundamentals, unique advantages, challenges, and experimental solutions of this powerful technique and review the state-of-the-art of laser-made electrocatalysts for water oxidation, oxygen reduction, hydrogen evolution, nitrogen reduction, carbon dioxide reduction, and organic oxidations, followed by laser-made nanomaterials for light-driven catalytic processes and heterogeneous catalysis of thermochemical processes. We also highlight laser-synthesized nanomaterials for which proposed catalytic applications exist. This review provides a practical guide to how the catalysis community can capitalize on pulsed laser in liquids synthesis to advance catalyst development, by leveraging the synergies of two fields of intensive research.

Ultrathin PdCu alloy nanosheet-assembled 3D nanoflowers with high peroxidase-like activity toward colorimetric glucose detection

Enzyme-mimetic properties of nanomaterials can be efficiently tuned by controlling their size, composition, and structure. Here, ultrathin PdCu alloy nanosheet-assembled three-dimensional (3D) nanoflowers (Pd₁Cu_x NAFs) with tunable surface composition are obtained via a generalized strategy. In presence of H₂O₂, the as-synthesized Pd₁Cu_x NAFs can catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) to the oxidized form of TMB (oxTMB) with a characteristic absorption peak at 652 nm. Interestingly, Pd₁Cu_x NAFs show obviously composition-dependent peroxidase-like catalytic activities because of the synergistic interaction of nanoalloy. Additionally, different from 2D Pd nanosheets, the distinctive 3D superstructures are featured with rich approachable sites and proper layer spacing, which are in favor of fast mass transport and electron transfers during the catalytic process. Among the studied Pd₁Cu_x NAFs, the Pd₁Cu_1.7 NAFs show the highest enzyme-like activities and can be successfully applied for the colorimetric detection of glucose with a low detection limit of 2.93 ± 0.53 μM. This work provides an efficient avenue to fabricate PdCu NAF nanozymes in biosensing toward glucose detection. Two-dimensional (2D) PdCu ultrathin nanosheet-assembled 3D nanoflowers (Pd₁Cu_x NAFs) with tunable surface composition exhibit substantially enhanced intrinsic peroxidase-like catalytic activities. The Pd₁Cu_1.7 NAFs are successfully used as peroxidase mimic catalyst for the colorimetric detection of glucose with low detection limit of 2.93 μM.

An electrostatic repulsion strategy for a highly selective and sensitive “switch-on” fluorescence sensor of ascorbic acid based on the cysteamine-coated CdTe quantum dots and cerium(iv)

A highly selective “switch-on” fluorescence approach for sensing of ascorbic acid (AA) based on the system of CA-CdTe QDs-Ce⁴⁺-AA was developed.

Two-Dimensional Nanomaterials With Enzyme-Like Properties for Biomedical Applications

Recently, remarkable progress has been made in nanozyme research due to the rapid development of nanomaterials. Two-dimensional nanomaterials such as metal nanosheets, graphene-based materials, transition metal oxides/dichalcogenides, etc., provide enhanced physical and chemical functionality owing to their ultrathin structures, high surface-to-volume ratios, and surface charges. They have also been found to have high catalytic activities in terms of natural enzymes such as peroxidase, oxidase, catalase, and superoxide dismutase. This review provides an overview of the recent progress of nanozymes based on two-dimensional nanomaterials, with an emphasis on their synthetic strategies, hybridization, catalytic properties, and biomedical applications. Finally, the future challenges and prospects for this research are discussed.

Synthesis, Catalytic Properties and Application in Biosensorics of Nanozymes and Electronanocatalysts: A Review

The current review is devoted to nanozymes, i.e., nanostructured artificial enzymes which mimic the catalytic properties of natural enzymes. Use of the term "nanozyme" in the literature as indicating an enzyme is not always justified. For example, it is used inappropriately for nanomaterials bound with electrodes that possess catalytic activity only when applying an electric potential. If the enzyme-like activity of such a material is not proven in solution (without applying the potential), such a catalyst should be named an "electronanocatalyst", not a nanozyme. This paper presents a review of the classification of the nanozymes, their advantages vs. natural enzymes, and potential practical applications. Special attention is paid to nanozyme synthesis methods (hydrothermal and solvothermal, chemical reduction, sol-gel method, co-precipitation, polymerization/polycondensation, electrochemical deposition). The catalytic performance of nanozymes is characterized, a critical point of view on catalytic parameters of nanozymes described in scientific papers is presented and typical mistakes are analyzed. The central part of the review relates to characterization of nanozymes which mimic natural enzymes with analytical importance ("nanoperoxidase", "nanooxidases", "nanolaccase") and their use in the construction of electro-chemical (bio)sensors ("nanosensors").

Room-Temperature Laser Synthesis in Liquid of Oxide, Metal-Oxide Core-Shells, and Doped Oxide Nanoparticles

Although oxide nanoparticles are ubiquitous in science and technology, a multitude of compositions, phases, structures, and doping levels exist, each one requiring a variety of conditions for their synthesis and modification. Besides, experimental procedures are frequently dominated by high temperatures or pressures and by chemical contaminants or waste. In recent years, laser synthesis of colloids emerged as a versatile approach to access a library of clean oxide nanoparticles relying on only four main strategies running at room temperature and ambient pressure: laser ablation in liquid, laser fragmentation in liquid, laser melting in liquid and laser defect-engineering in liquid. Here, established laser-based methodologies are reviewed through the presentation of a panorama of oxide nanoparticles which include pure oxidic phases, as well as unconventional structures like defective or doped oxides, non-equilibrium compounds, metal-oxide core-shells and other anisotropic morphologies. So far, these materials showed several useful properties that are discussed with special emphasis on catalytic, biomedical and optical application. Yet, given the endless number of mixed compounds accessible by the laser-assisted methodologies, there is still a lot of room to expand the library of nano-crystals and to refine the control over products as well as to improve the understanding of the whole process of nanoparticle formation. To that end, this review aims to identify the perspectives and unique opportunities of laser-based synthesis and processing of colloids for future studies of oxide nanomaterial-oriented sciences.

Recent Progress of Nanozymes in the Detection of Pathogenic Microorganisms

Infectious diseases are among the world's principal health problems. It is crucial to develop rapid, accurate and cost-effective methods for the detection of pathogenic microorganisms. Recently, considerable progress has been achieved in the field of inorganic enzyme mimics (nanozymes). Compared with natural enzymes, nanozymes have higher stability and lower cost. More interestingly, their properties can be designed for various demands. Herein, we introduce the latest research progress on the detection of pathogenic microorganisms by using various nanozymes. We also discuss the current challenges of nanozymes in biosensing and provide some strategies to overcome these barriers.