Three-dimensional lower extremity alignment in the weight-bearing standing position in healthy elderly subjects

Effects of three-dimensional femur and tibia postures on the parameters of standing long-leg radiographs for osteoarthritic knees in elderly female subjects

BACKGROUND

Long-leg frontal radiographs of the lower extremities are used to assess knee osteoarthritis. Given the three-dimensional (3D) nature of alignment changes in osteoarthritis, postural alterations in the femur and tibia extend beyond the coronal plane (in-plane) to include the transverse and sagittal planes (out-of-plane). This study investigates the impact of these out-of-plane factors on in-plane knee alignment parameters observed in frontal radiographs.

METHODS

A total of 97 osteoarthritic knees in women were examined. Using a 3D-to-two-dimensional (2D) image matching technique, we evaluated the 3D postures of the femur and tibia in the standing position as viewed from frontal radiographs in the world coordinate system. Statistical analyses were conducted to explore associations between these 3D postures and 2D alignment parameters obtained from frontal radiographs under identical conditions.

FINDINGS

The femur exhibited a medial inclination of 2.7°, a posterior inclination of 3.9°, and an internal rotation of 4.2°, whereas the tibia showed a lateral inclination of 6.4°, an anterior inclination of 6.7°, and an internal rotation of 6.7°. Both coronal and rotational postures of femur and tibia influenced the hip-knee-ankle angle, mechanical axis percentage, and medial proximal tibial angle. However, only coronal factors of tibia impacted tibial joint line obliquity relative to the floor.

INTERPRETATION

Attention should be paid to the potential impact of the out-of-plane postures of the femur and tibia on parameters assessed in plain frontal radiographs of the lower extremities.

Coronal Knee Alignment and Tibial Rotation in Total Knee Arthroplasty: A Prospective Cohort Study of Patients with End-Stage Osteoarthritis

Several studies have found a relationship between the rotational anatomy of the distal femur and the overall coronal lower limb alignment in knees with osteoarthritis (OA). Less is known about the rotation of the proximal tibia, especially in the context of total knee arthroplasty (TKA), where one of the goals of the surgery is to achieve the appropriate component-to-component rotation. The aim of this study was to investigate the relationship between the coronal alignment of the lower extremity and the relative proximal tibial rotation. A prospective cohort study of patients with an end-stage OA scheduled for TKA was conducted. All patients underwent a computed tomography (CT) scan and a standing X-ray of both lower limbs. A relative femorotibial rotation was measured separately for mechanical and kinematic alignment. A statistically significant correlation was found between the tibial varus and the external tibial rotation (p < 0.001). Out of 14 knees with high tibial varus (>5°), 13 (93%) and 7 (50%) knees had >10° of femorotibial rotation for the mechanical and kinematic alignment landmarks, respectively. In order to keep the component-to-component rotation within the 10° margin, more internal rotation of the tibial component is required in knees with higher tibial varus.

The morphology of the femoral posterior condyle affects the external rotation of the femur

PURPOSE

The purpose of this study was to identify factors related to the external rotation of the femur during knee flexion.

METHODS

Three-dimensional (3D) digital models of the femur and tibia were reconstructed from computed tomography images of 41 healthy Japanese subjects. Thirteen parameters related to femoral and tibial morphology and alignment of the lower extremities were evaluated, including the inclination angle of the posterior lateral and medial femoral condyles, the ratio of the medial and lateral posterior condyle radii approximated as spheres, the spherical condylar angle, the posterior condylar angle, the medial and lateral posterior tibial slope, the difference of medial and lateral posterior tibial slope, the tibiofemoral rotation angle, the 3D femorotibial angle, the 3D hip-knee-ankle angle, and the passing point of the weight-bearing line (medial-lateral and anterior-posterior). The rotation angle of the femur relative to the tibia during squatting was investigated using a 3D to 2D image matching technique and the relationships with the13 parameters were determined.

RESULTS

The femur externally rotated substantially up to 20° of knee flexion (9.2° ± 3.7°) and gently rotated after 20° of knee flexion (12.8° ± 6.2°). The external rotation angle at 20°-120° of knee flexion correlated with the spherical condylar angle, the tibiofemoral rotation angle and the inclination angle of the posterior medial condyles (correlation coefficient; 0.506, 0.364, 0.337, respectively).

CONCLUSION

The parameter that was most related to the external rotation of the femur during knee flexion was the spherical condylar angle.

LEVEL OF EVIDENCE

IV.

Pre-operative predictive factors of residual varus on the mechanical axis after Oxford unicompartmental knee arthroplasty

Background

Residual varus after Oxford unicompartmental knee arthroplasty (UKA) happens frequently. This study aims to evaluate the pre-operative contributing factors of residual varus.

Methods

A total of 1,002 knees (880 patients, 201 patients were male, and 679 were female) underwent Oxford UKA in the Orthopedic Surgery Department of the Beijing Jishuitan Hospital from March 2018 to April 2021. The mean age of the patient was 64.7 ± 7.7 years. To assess residual varus, the full-length lower extremity is placed upright for EOS imaging, with the knee fully extended. The angle of post-operative residual varus was measured as described by Noyes et al. Of the knees studied, they were either categorized into an under-corrected group (post-operative Noyes angle >5°) or a corrected group (post-operative Noyes angle ≤5°). Age, gender, body mass index (BMI), range of motion (ROM), Clinical American Knee Society Score (Clinical AKSS), and Function American Knee Society Score (Function AKSS) were compared. The following additional parameters were measured: pre-operative Noyes angle, lateral distal femoral angle (LDFA), medial proximal tibial angle (MPTA), the posterior slope of the proximal tibia angle (PPTA), joint line converge angle (JLCA), and fixed flexion deformity (FFD).

Results

There was no statistically significant difference between the two groups in regards to gender (p = 0.428), surgical leg (p = 0.937), age (p = 0.851), BMI (p = 0.064), pre-operative Clinical AKSS (p = 0.206) and Function AKSS (p = 0.100). However, pre-operative ROM statistically differed between the two groups (p < 0.001). The contributing factors of post-operative residual varus were determined to be the following parameters: pre-operative MPTA (p < 0.001, OR = 4.522, 95% CI: 2.927-6.984), pre-operative Noyes (p < 0.001, OR = 3.262, 95% CI: 1.802-5.907) and pre-operative FFD (p = 0.007, OR = 1.862, 95% CI: 1.182-2.934). The effects of pre-operative LDFA (p = 0.146), JLCA (p = 0.942), and pre-operative PPTA (p = 0.899) on the post-operative mechanical axis did not show statistical significance.

Conclusions

Patients with severe pre-operative varus, particularly varus deformity mainly from the tibial side or pre-operative FFD, are more prone to get extremity mechanical axis residual varus after UKA with Oxford.

A Systematic Review on Quadriceps Angle in Relation to Knee Abnormalities

Previous studies on the quadriceps (Q) angle and its relation to knee problems have led to conflicting conclusions. In this comprehensive review, we evaluate recent studies on the Q angle and analyze the changes in Q angles. Specifically, we investigate the variation in Q angles when measured under the following conditions: 1) under various measurement techniques; 2) between symptomatic and non-symptomatic groups; 3) between samples of men and women; 4) unilateral versus bilateral Q angles; 5) Q angle in adolescent boys and girls. It is widely believed that Q angles are more significant in symptomatic patients than in asymptomatic individuals or that the right lower leg and left lower limb are equivalent, which is supported by little scientific data. However, research states that young adult females have higher mean Q angles than males.

Comparison of the Tibial Posterior Slope Angle Between the Tibial Mechanical Axis and Various Diaphyseal Tibial Axes After Total Knee Arthroplasty

Background

The posterior tibial slope angle (PTS) is crucial for sagittal alignment after total knee arthroplasty (TKA). This study aimed to determine which PTS based on the lateral view of standard knee radiographs (LSKRs; 36 × 43 cm) reflects the PTS based on a full-length lateral tibial radiograph (FLTR).

Methods

A total of 290 patients (355 knees) who underwent primary TKA were retrospectively recruited. Cross-sectional views from the 3-dimensional digital model of the tibial prosthesis and bone complex in the sagittal plane were used as FLTRs and LSKRs. Considering the region 21.5 cm proximal to the site of FLTR as the spot for LSKR to determine the 5 tibial diaphyseal axes, the axis that simulates the PTS as determined by the tibial mechanical axis between the center of the tibial component and the ankle plafond in LSKR was determined and compared.

Results

PTS (α₅) defined by the line connecting the midpoints of tibial width between the region 10-cm distal to the knee joint and the distal end of the tibia based on LSKR revealed the least mean difference (0.13° ± 1.00°) and the strongest correlation (P < .001, r = 0.948) with PTS based on FLTR (α₀). The number of knees in α₅, indicating a difference of <2° from α₀, was 333 of 355 (93.8%). The equivalence test results indicated that α₀ and α₅ were statistically equivalent within a difference of 2° (P < .001).

Conclusions

PTS (α₅) can be used as a clinically reliable substitution of the true PTS on an FLTR for evaluating sagittal alignment after TKA.

The three-dimensional quadriceps vector is most parallel to the spherical axis in Japanese varus osteoarthritic knees

BACKGROUND

The quadriceps femoris may be a reliable reference to proper alignment in total knee arthroplasty (TKA). We previously showed the quadriceps vector (QV) to be the most parallel to the spherical axis (SA-center hip to center medial condyle) for healthy knees. The purpose of this study was to determine whether the QV is the most parallel to the SA in knees with varus osteoarthritis (OA).

METHODS

CT imaging for 35 varus OA and 40 healthy Japanese knees was used to construct 3D models of the femur, patella and each quadriceps component for each subject. The QV was calculated using principal component analysis for direction and was compared with the relationship of the QV to the measurement axes of the lower extremity, including the anatomical, mechanical and spherical axes.

RESULTS

The direction of the QV for the OA knee group was different from that for the healthy knee group in 3D space (medio-lateral direction: women, p = 0.532, men, p = 0.540; antero-posterior direction: women, p = 0.141, men, p < 0.001). However, the angle of the QV in relation to measurement axes in the coronal plane was closest to the SA in both groups (around 1°), with no difference between the groups (women, p = 0.382, men, p = 0.943).

CONCLUSION

In the coronal plane, the SA most closely approximates the QV for both healthy and OA knees. The more posterior QV position in the 3D space may affect the patellofemoral joint.

Postoperative femoral anteroposterior position while standing correlates with the posterior tibial slope and posterior femoral condylar offset in medial pivot total knee arthroplasty

BACKGROUND

After total knee arthroplasty (TKA), the femur tends to be located posteriorly under weight-bearing (WB) conditions, and a paradoxical femoral anterior motion occurs, leading to joint instability.

OBJECTIVE

We aimed to clarify factors which affect the postoperative femoral anteroposterior position relative to the tibia under WB conditions (A-P position) in medial pivot (MP) TKA.

METHODS

Among 126 knees (81 women) with primary TKA using MP prosthesis for varus osteoarthritic knees, 70 knees had cruciate-retaining inserts (CR) with the reduced conformity and 56 knees had cruciate-substituting inserts (CS) with the full conformity. Using the three-dimensional (3D) assessment system, the associations between the A-P position and the factors including pre- and postoperative lower extremity alignment, component positions, and posterior femoral condylar offset (PCO), were assessed regarding the type of inserts.

RESULTS

Significant correlations were seen between the A-P position and posterior tibial slope (PTS), medial PCO, and lateral PCO. Regarding the difference between the two inserts, the PTS, medial PCO, and lateral PCO significantly correlated with the A-P position in the CR, but only the PTS correlated in the CS.

CONCLUSIONS

The increased PTS and decreased PCO were the dominant factors for the A-P position in MP TKA.

New evaluation indices for rotational knee angles in standing anteroposterior knee radiographs

BACKGROUND

Identifying the time course of rotational knee alignment is crucial for elucidating the etiology in knee osteoarthritis.

OBJECTIVE

The aim of this study was to propose new rotational indices for calculating the change in relative rotational angles between the femur and tibia in standing anteroposterior (AP) radiographs.

METHODS

Forty healthy elderly volunteers (20 women and 20 men; mean age, 70 ± 6 years) were assessed. The evaluation parameters were as follows: (1) femoral rotational index: the distance between the sphere center of the medial posterior femoral condyle and the lateral edge of the patella, and (2) tibial rotational index: the distance between the medial eminence of the tibia and the lateral edge of the fibula head. The indices were standardized by the diameter of the sphere of the medial posterior femoral condyle. This study (1) identified the relationship between changes in rotational indices and the simulated rotational knee angles in the standing position, (2) proposed a regression equation for the change in relative rotational angles between the femur and tibia in standing AP radiographs, and (3) verified the accuracy of the regression equation.

RESULTS

The rotational indices increased in direct proportion to simulated rotational knee angles (femoral index: r > 0.9,p < 0.0001; tibial index: r > 0.9, p < 0.0001). Based on the results, the regression equation with the accuracy of 0.45 ± 0.26° was determined.

CONCLUSIONS

The proposed regression equations can potentially predict the change in relative rotational angles between the femur and tibia in a pair of standing AP radiographs taken at different dates in longitudinal studies.

Influence of posterior tibial slope on three-dimensional femorotibial alignment under weight-bearing conditions in healthy Japanese elderly people

BACKGROUND

Assessment of three-dimensional (3D) femorotibial alignment is essential for successful knee osteoarthritis treatment in the elderly. The complex morphology of the posterior tibial slope (PTS) might have an influence on sagittal and rotational alignment and the positional relationship between the femur and tibia in the anterior-posterior (AP) direction under weight-bearing conditions.

OBJECTIVE

This study aimed to clarify the association between the PTS and 3D femorotibial alignment under weight-bearing conditions in healthy Japanese elderly individuals.

METHODS

We investigated the 3D femorotibial alignment of 110 lower extremities of 55 healthy individuals (26 women, 29 men, mean age: 70 ± 6 years). Using our previously reported 3D-to-2D image registration technique, we evaluated the 3D hip-knee-ankle angle (3DHKA) in the sagittal plane, rotational alignment, and the distance between the femoral and tibial origins in the AP direction (tibial AP position) as femorotibial alignment parameters under weight-bearing conditions. We assessed the medial and lateral PTS and their angular difference (PTS difference) as PTS parameters. Stepwise multiple linear regression analysis was performed using PTS parameters and other possible confounders (age, sex, height, and weight) as the independent variables and femorotibial alignment parameters as the dependent variable.

RESULTS

Weight (𝛽 = 0.393, p < 0.001) and lateral PTS (𝛽 = 0.298, p < 0.001) were the predictors associated with 3DHKA in the sagittal plane. Lateral PTS (𝛽 = 0.304, p = 0.001) was the only predictor associated with the tibial AP position. Sex (𝛽 = -0.282, p = 0.002) and PTS difference (𝛽 = -0.231, p = 0.012) were associated with rotational alignment.

CONCLUSIONS

We found that a steeper lateral PTS resulted in a more flexed knee and anterior tibia. The PTS difference was positively correlated with tibial external rotation. Our data could be used as the standard reference for realignment surgery to ensure PTS is appropriately maintained.

Association between the toe angle and bony factors in the transverse plane for osteoarthritic knees compared with healthy knees

BACKGROUND

The association between the toe angle and bony rotational factors is critical to explain issues related to the onset and progression of knee osteoarthritis (OA).

OBJECTIVE

The study aimed to clarify the association between the toe angle and each of the femoral and tibial transvers direction relative to gait direction, rotational knee alignment, and bony torsional deformity for the subjects with knee OA.

METHODS

This study evaluated 58 knees in 24 healthy elderly (72 ± 5 years) and 34 varus knee OA (72 ± 6 years). A three-dimensional (3D) assessment system was used on 3D models and biplanar long-leg radiographs with the toe angle reflecting gait direction, applying a 3D-to-2D image registration technique. The main parameters on the transverse plane were: (1) toe angle, (2) transverse direction of the femur and tibia relative to the gait direction, (3) femoral neck anteversion, (4) condylar twist angle, (5) tibial torsion, and (6) rotational knee alignment.

RESULTS

The alignment parameters, except for the tibial transverse direction, were different between healthy and osteoarthritic knees. In knee OA, the femoral neck anteversion - femoral transverse direction (p = 0.001), femoral transverse direction - tibial transverse direction (p < 0.001), and tibial transverse direction - toe angle (p < 0.001) were associated.

CONCLUSIONS

The osteoarthritic knees showed that the femoral neck anteversion was associated with the femoral transverse direction, which determined the tibial transverse direction by adjusting the rotational knee alignment, leading to the toe angle.

Three-dimensional morphology of the distal femur based on surgical epicondylar axis in the normal elderly population

BACKGROUND

We aimed to analyze the surface morphology of the distal femur in three dimensions for the healthy elderly, based on the concept that the surgical epicondylar axis (SEA) is a better surrogate for the flexion-extension axis of the knee joint.

METHODS

We studied 77 healthy elderly volunteers (40 males and 37 females; age, 68 ± 6 years). The medial and lateral contact lines were calculated three-dimensionally, using the highest points of the medial and lateral condyles in 201 cross-sectional planes around the SEA (every 1°, -60° (hyperextension) to 140° (flexion)). A piecewise fitting function consisting of two linear segments was applied to detect the inflection point of the constant radii in the sagittal plane. The main assessment parameters were knee flexion angle at the inflection point of the radius (inflection angle), mean radius from 0° to the inflection angle (constant radius), and coronal tilt angle of the contact line.

RESULTS

The inflection angles, constant radii, and coronal tilt angles were 78.2 ± 8.6°, 26.1 ± 2.3 mm, and -0.6 ± 3.2° and 65.6 ± 9.2°, 23.9 ± 2.2 mm, and 6.2 ± 3.2° in the medial and lateral condyles, respectively (all, P < 0.001). The coronal alignment was 88.7 ± 2.2°.

CONCLUSIONS

The medial and lateral femoral condyles showed asymmetrical morphologies with the almost 'constant' radius of sagittal curvature from 0° to around 80° and 65° of knee flexion, respectively.

Articular surface of the medial proximal tibia is aligned parallel to the ground in three-dimensional space under weight-bearing conditions in healthy and varus osteoarthritic knees

PURPOSE

To test the hypothesis that an inclined articular surface on the medial proximal tibia is aligned more parallel to the ground in three-dimensional (3D) space under weight-bearing (WB) conditions (parallel phenomenon) than under non-WB (NWB) conditions in healthy and varus osteoarthritic knees.

METHODS

We examined 55 healthy knees (26 women, 29 men; mean age, 70 ± 6 years) and 108 varus osteoarthritic knees (66 women, 16 men; mean age, 74 ± 7 years). For the evaluation under WB conditions, a 3D assessment system was used on biplanar long-leg radiographs and 3D bone models using a 3D-to-2D image registration technique. In addition, the least square method was used to determine the approximation plane. The angles between the normal vector for the approximation plane of an articular surface on the medial proximal tibia and each axis of the tibial or world coordinate system were calculated.

RESULTS

Morphologically, the inclination of the approximation plane was steeper in osteoarthritic knees than in healthy knees (p < 0.0001). The approximation plane was aligned more parallel to the ground under WB conditions than under NWB conditions in healthy (p < 0.0001) and osteoarthritic knees (p < 0.0001).

CONCLUSIONS

The parallel phenomenon in the medial proximal tibia was confirmed for healthy and varus osteoarthritic knees. The medial proximal tibia plays an important role in the parallel phenomenon, assumingly associated with varus alignment and varus thrust. The inclination of the medial proximal tibia may become a new parameter for imaging investigations.

LEVEL OF EVIDENCE

III.

Functionally Oriented Alignment of the Lower Extremity Reflecting the Direction of Gait for Healthy Elderly, Knee Osteoarthritis, and Total Knee Arthroplasty Subjects

Purpose

The objective of this study was to evaluate the functional lower extremity alignment based on both position and motion [functionally oriented alignment (FOA)] of the knee in healthy elderly, varus osteoarthritis (OA), and total knee arthroplasty (TKA) subjects.

Methods

This study evaluated 87 knees in 24 healthy elderly (72 ± 5 years), 39 varus OA (72 ± 6 years), and 24 TKA (75 ± 4 years) subjects. A 3D assessment system was used on 3D models and biplanar long-leg radiographs with the toe angle reflecting gait direction, by applying a 3D-to-2D image registration technique. In the world coordinate system, the y-, z-, and x-axes were defined as gait direction, gravity direction, and the cross product of y- and z-axes, respectively. The parameters were: (a) coronal inclination, sagittal inclination, and transverse direction of the femur and tibia relative to the ground and (b) the difference between the yz-plane of the world coordinate system (functional plane) and the yz-plane of the femoral or tibial coordinate system (anatomical plane).

Results

The femur had more medial and posterior inclination and the tibia had more lateral and anterior inclination in osteoarthritic knees as compared to healthy knees, and TKA knees had inclinations similar to healthy knees. Rotation was similar or different in the anatomical and functional planes among the subjects with the healthy, knee OA, and TKA.

Conclusions

The association between the anatomical and functional planes and the position of each bone relative to gravity varied depending on the condition of the knees.

Level of Evidence: Level of III

A comparative study of weight-bearing and non-weight-bearing 3-dimensional lower extremity alignment in knee osteoarthritis

BACKGROUND

Lower extremity alignment is an important variable with respect to the development and progression of knee osteoarthritis. It is very essential for the preoperative planning of realignment surgeries such as total knee arthroplasty and high tibial osteotomy. Nevertheless, there have been no reports comparing 3D lower extremity alignment between weight-bearing upright and non-weight-bearing horizontal states in osteoarthritic knees in the same subject. Therefore, we determined whether the alignment of the lower extremity in the weight-bearing upright state differed from that in the non-weight-bearing horizontal or supine position in patients with knee osteoarthritis.

METHODS

Adduction-abduction, flexion-extension, and rotational angle of osteoarthritic knees were assessed in weight-bearing upright and non-weight-bearing supine positions. Knee alignment in the supine position was determined from preoperative computed tomography data. In the weight-bearing upright state, alignment was determined using a technique that utilized 2D-3D image-matching with biplanar computed radiography and 3D bone models of the complete lower extremity rebuilt using computed tomography-based information.

RESULTS

We assessed 81 limbs from osteoarthritic knee patients (74 women, 7 men; mean age 75.3 years, range 59-86 years). In the coronal plane, there were varus deformities in both the supine and standing positions, while there was flexion in both the supine upright state and position at the sagittal plane. In the axial plane, the rotation of the tibia to the femur was neutral in the supine position and internal in the upright state.

CONCLUSION

Patient position significantly affects lower extremity alignment in osteoarthritic knees. This study provides important data regarding the preoperative evaluation of realignment surgery in total knee arthroplasty and high tibial osteotomy. We believe that these results are an important contribution to the knowledge regarding knee osteoarthritis.

Tibiofemoral rotation is related to differences in the lateral femoral condyle configuration in both normal subjects and women with hip dysplasia: a three-dimensional analysis

Background

We assessed the morphological differences in the knee joint related to knee rotation angle in patients with hip dysplasia. These results may explain the anatomy of the knee in patients with hip dysplasia and aid in planning knee surgery.

Methods

We enrolled 73 women (146 legs, 35.6 ± 9.0 years) with bilateral hip dysplasia and 45 healthy women (90 legs, 49.0 ± 18.9 years) without lumbago, knee symptoms, or osteoarthritic findings of the knee or spine on plain radiographs. We examined the parameters affecting knee rotation angle, such as the condylar twist angle and femoral condyle measurements with a three-dimensional bone model using the correlation coefficients of each parameter.

Results

The condylar twist angle and the length of the posterior part of the lateral femoral condyle were statistically positively correlated with knee rotation angle in both the normal (condylar twist angle: r = 0.286, p = 0.007, posterolateral: r = 0.429, p < 0.001) and developmental dysplasia of the hip groups (condylar twist angle: r = 0.230, p = 0.033, posterolateral: r = 0.272, p = 0.005). Knee rotation angle had no statistical correlation with femoral neck anteversion in the developmental dysplasia of the hip group (r = 0.094, p = 0.264), but had a statistical correlation with femoral neck anteversion in the normal group (r = 0.243, p = 0.039).

Conclusions

Knee joint morphology is affected by hip dysplasia. We found that the length of the posterior part of the lateral femoral condyle was significantly positively correlated with knee rotation angle in both the normal and developmental dysplasia of the hip groups, and this finding indicates that a greater posterolateral dimension was associated with a greater knee rotation angle. These morphological knee joint differences in patients with hip dysplasia may help determine the alignment of prostheses in total knee arthroplasty.

Evaluation of anatomical pelvic parameters between normal, healthy men and women using three-dimensional computed tomography: a cross-sectional study of sex-specific and age-specific differences

Background

Sagittal spinal balance and standing posture are affected by pelvic morphology, especially pelvic incidence (PI). However, it is not difficult to identify the hip center because of overlap of the pelvis, image contrast, and soft tissue artifacts. Measurements of PI are not always suitable in all patients, especially those with osteoarthritis of the hip joint whose femoral head is nonspherical, subluxed, or dislocated. We measured PI, pelvic tilt (PT), and sacral slope (SS) as anatomical parameters using a novel three-dimensional measurement in order to compare the pelvic morphology between normal, healthy men and women.

Methods

In this cross-sectional study, we evaluated 108 Japanese subjects (55 men, 53 women) without low back or knee pain. We used the three-dimensional pelvis model adjusted to the anterior pelvic plane and measured the pelvic parameters. The subjects were stratified by age (< 50 versus ≥ 50 years) and sex. Intraobserver and interobserver reliabilities were calculated with intraclass correlation coefficients.

Results

There was no significant difference in PI, anatomical-PT, and anatomical-SS between sexes. There was a strong correlation between PI and anatomical-SS in men and women (R = 0.790 and 0.715, respectively). Values of anatomical-PT were lower, and values of anatomical-SS were greater among older subjects than among younger subjects; the value of PI was similar between younger and older subjects. Intraobserver and interobserver mean absolute differences were about 2 mm and 2°, respectively; the intraclass correlation coefficient was > 0.87.

Conclusions

We found a strong correlation between PI and anatomical-SS in men and women. This novel measurement concept may be useful to estimate PI from anatomical-SS because the measurements of PI are not always suitable in all patients, especially those with osteoarthritis of the hip joint whose femoral head is not spherical or whose femoral head is subluxed or dislocated. This is the first report to describe the relationship between PI, anatomical-PT, and anatomical-SS as morphologic parameters with a high interclass correlation coefficient for intraobserver and interobserver reliabilities.

Accuracy of acetabular cup placement using CT-based navigation in total hip arthroplasty: Comparison between obese and non-obese patients

BACKGROUND

In obese patients, malpositioning of the acetabular cup increases the risk of dislocation in total hip arthroplasty (THA). The aim of this study was to determine whether obesity affects the accuracy of acetabular cup positioning using a computed tomography (CT)-based navigation system.

METHODS

We retrospectively evaluated 226 consecutive patients who underwent cementless primary THAs assisted by the CT-based hip navigation system. We divided the patients into three groups according to body mass index (BMI) and examined the difference between preoperative planning and postoperative implantation angles from CT data.

RESULTS

There was no significant correlation between BMI and both inclination and anteversion differences (R = 0.028 and R = 0.045, respectively). There were no significant differences among the BMI < 25, 25 ≦ BMI < 30, and BMI ≧ 30 groups (p value: 0.725, 0.934, respectively); between the BMI < 25 and BMI ≧ 25 groups (p value: 0.542, 0.697, respectively); and between the BMI < 30 and BMI ≧ 30 groups with regard to inclination and anteversion (p value: 0.859, 0.456, respectively). Moreover, similar findings were observed with regard to the distance between the preoperative planning and postoperative cup positioning for the transverse, anteroposterior, and craniocaudal axes of the pelvis.

CONCLUSION

We found that the accuracy of acetabular cup placement using CT based-navigation in THA was not affected in obese patients. Therefore, THAs with a CT-based navigation system are considered useful in obese patients.

Effect on inclined medial proximal tibial articulation for varus alignment in advanced knee osteoarthritis

BACKGROUND

The inclination of the medial compartment of the proximal tibia (MCT) is assumed to be a critical factor for varus alignment in advanced knee osteoarthritis (OA). This study was aimed at investigating; (1) whether the inclination of MCT is aligned parallel to the ground under weight-bearing (WB) conditions; (2) whether this is associated with the change in alignment and the relative position between the bones; and (3) whether the tibia or femur mainly contributes to the changes.

METHODS

We examined 102 knees (84 women, 18 men; mean 75 years). A three-dimensional (3D) assessment system was applied on biplanar whole lower extremity radiographies using 3D-to-2D image registration technique. The evaluation parameters were 1) MCT angle, 2) femorotibial angle (FTA), 3) medial-lateral femoral location to the tibia (M-L femoral location), 4) WB line passing point, and 5) tibial position to WB line (tibial position) and 6) femoral postion to WB line (femoral position). Each parameter was evaluated in non-WB and WB conditions, and the differences (Δ-parameters).

RESULTS

MCT angle in the world coordinate system was larger than that in the tibial coordinate system (p <  0.0001). ΔMCT angle was correlated with ΔFTA (p = 0.002) and ΔM-L femoral location (p = 0.004). The tibial position was the more dominant factor for ΔMCT angle (p = 0.001), ΔFTA (p <  0.0001), and ΔWB line passing point (p <  0.0001) .

CONCLUSIONS

The inclination in MCT was aligned parallel to the ground under WB conditions (tibial parallel phenomenon). The parallel phenomenon was associated with the change of alignment and the relative position between the bones in the coronal plane. These phenomena were produced mainly by the tibia, not the femur.

LEVEL OF EVIDENCE

Level IV.

Alignment in the transverse plane, but not sagittal or coronal plane, affects the risk of recurrent patella dislocation

PURPOSE

Abnormalities of lower extremity alignment (LEA) in recurrent patella dislocation (RPD) have been studied mostly by two-dimensional (2D) procedures leaving three-dimensional (3D) factors unknown. This study aimed to three-dimensionally examine risk factors for RPD in lower extremity alignment under the weight-bearing conditions.

METHODS

The alignment of 21 limbs in 15 RPD subjects was compared to the alignment of 24 limbs of 12 healthy young control subjects by an our previously reported 2D-3D image-matching technique. The sagittal, coronal, and transverse alignment in full extension as well as the torsional position of the femur (anteversion) and tibia (tibial torsion) under weight-bearing standing conditions were assessed by our previously reported 3D technique. The correlations between lower extremity alignment and RPD were assessed using multiple logistic regression analysis. The difference of lower extremity alignment in RPD between under the weight-bearing conditions and under the non-weight-bearing conditions was assessed.

RESULTS

In the sagittal and coronal planes, there was no relationship (statistically or by clinically important difference) between lower extremity alignment angle and RPD. However, in the transverse plane, increased external tibial rotation [odds ratio (OR) 1.819; 95% confidence interval (CI) 1.282-2.581], increased femoral anteversion (OR 1.183; 95% CI 1.029-1.360), and increased external tibial torsion (OR 0.880; 95% CI 0.782-0.991) were all correlated with RPD. The tibia was more rotated relative to femur at the knee joint in the RPD group under the weight-bearing conditions compared to under the non-weight-bearing conditions (p < 0.05).

CONCLUSIONS

This study showed that during weight-bearing, alignment parameters in the transverse plane related to the risk of RPD, while in the sagittal and coronal plane alignment parameters did not correlate with RPD. The clinical importance of this study is that the 3D measurements more directly, precisely, and sensitively detect rotational parameters associated with RPD and hence predict risk of RPD.

LEVEL OF EVIDENCE

III.

Correlation between posterior tibial slope and sagittal alignment under weight-bearing conditions in osteoarthritic knees

INTRODUCTION

Posterior tibial slope (PTS) and sagittal alignment are important factors in the etiology of knee osteoarthritis and knee surgery. Clinically, sagittal alignment, which indicates flexion contracture of the knee, contributes to knee function in weight-bearing (WB) conditions. PTS and sagittal alignment under WB conditions in varus osteoarthritic knees are presumed to affect each other, but their association remains unclear. In this study, we aimed to clarify the association.

MATERIAL AND METHODS

In total, 140 osteoarthritic varus knees were investigated. Under WB conditions, a three-dimensional (3D) alignment assessment system was applied via biplanar long-leg X-rays, using 3D-to-2D image registration technique. The evaluation parameters were as follows: 1) 3D mechanical flexion angle (3DMFA) in regards to sagittal alignment, 2) passing point in the WB line (PP), and 3) medial and lateral PTS.

RESULTS

The medial and lateral PTS showed a positive correlation with 3DMFA and PP, respectively (medial PTS-3DMFA, p = 0.001; medial PTS-PP, p < 0.0001; lateral PTS-3DMFA, p < 0.0001; lateral PTS-PP, p = 0.002). The flexion contracture group with 3DMFA >5° demonstrated greater PTS than non-flexion contracture group (medial PTS, p = 0.006; lateral PTS, p = 0.006).

CONCLUSIONS

Both medial and lateral PTS were correlated with sagittal alignment under WB conditions and were larger in the flexion contracture group. This finding can explain the function to take the load articular surface parallel to the ground for holding the balance in WB conditions in the sagittal plane for osteoarthritic knees. Moreover, surgeons may be required to decrease the PTS during knee arthroplasty to restore full extension in knees of patients with fixed flexion contracture.

Evaluation of pelvic morphology in female patients with developmental dysplasia of the hip using three-dimensional computed tomography: A cross-sectional study

BACKGROUND

The purpose of this study is to measure pelvic morphology with respect to the pelvic incidence, pelvic tilt, and sacral slope using 3-dimensional measurement and to compare the pelvic morphology between the normal population and women with developmental dysplasia of the hip (center-edge angle, <25°). We hypothesized that the relationship between pelvic incidence, anatomical pelvic tilt, and anatomical sacral slope would be different between normal subjects and patients with developmental dysplasia of the hip.

METHODS

We evaluated 61 healthy women without low back or knee pain and 71 patients with developmental dysplasia of the hip. We used the 3-dimensional pelvis model adjusted to the anterior pelvic plane and measured the pelvic parameters. To determine correlation, we used Pearson's coefficients. To evaluate variation, we used intraclass correlation coefficients.

RESULTS

Pelvic incidence and anatomical pelvic tilt were significantly greater by 4° in the group with developmental dysplasia of the hip than in the normal group (p = 0.026 and < 0.001, respectively). The vertical distance from hip axis to the center of the S1 endplate was significantly greater in the group with developmental dysplasia of the hip than in normal group, that is, by 8 mm (p < 0.001). There was a strong correlation between pelvic incidence and anatomical sacral slope in both groups (R = 0.707 and 0.897, respectively). The intraobserver and interobserver mean absolute differences were about 2 mm and 2°, respectively, and the intraclass correlation coefficient was >0.88.

CONCLUSION

Pelvic incidence and anatomical-pelvic tilt were significantly greater in patients with developmental dysplasia of the hip. We found a strong correlation between the pelvic incidence and anatomical sacral slope in both groups. Therefore, anatomical-sacral slope may be useful for estimating pelvic incidence because it is not easily measured, especially in patients with osteoarthritis of the hip joint.

Contribution of sex and body constitution to three-dimensional lower extremity alignment for healthy, elderly, non-obese humans in a Japanese population

BACKGROUND

Humans support their bodies exclusively by vertical balance in bipedal locomotion, and the body, especially the lower extremity, generally changes with age. Sex and body constitution are assumed to be associated with lower extremity alignment, but this association remains to be elucidated. This study sought to clarify this association in healthy, elderly, non-obese humans in a Japanese population.

METHODS

The present study investigated 55 healthy volunteers (mean age: 70 ± 6 years). A 3D extremity alignment system was applied under weight-bearing conditions on biplane long lower extremities X-rays using a 3D-to-2D image registration technique. The evaluation parameters included 3D hip-knee-ankle angle (3DHKA) alignment in the coronal (coronal alignment) and sagittal planes (sagittal alignment) and rotational alignment between the femur and tibia. The influences of sex and body constitution on all the alignment were analyzed.

RESULTS

Multiple linear regression analysis with the dependent variable of each alignment showed that sex was the dominant factor for coronal and rotational alignment (coronal: p <  0.01; rotational: p <  0.01), and body weight was the dominant factor for sagittal alignment (p <  0.01).

CONCLUSIONS

The association of sex with coronal and rotational alignment and of body constitution with sagittal alignment were proved in healthy, elderly, non-obese humans in a Japanese population. This finding can lead to further understanding of the etiology of many diseases and age-related changes.

Extrinsic Factors as Component Positions to Bone and Intrinsic Factors Affecting Postoperative Rotational Limb Alignment in Total Knee Arthroplasty

BACKGROUND

This study aimed to identify the factors affecting postoperative rotational limb alignment of the tibia relative to the femur. We hypothesized that not only component positions but also several intrinsic factors were associated with postoperative rotational limb alignment.

METHODS

This study included 99 knees (90 women and 9 men) with a mean age of 77 ± 6 years. A three-dimensional (3D) assessment system was applied under weight-bearing conditions to biplanar long-leg radiographs using 3D-to-2D image registration technique. The evaluation parameters were (1) component position; (2) preoperative and postoperative coronal, sagittal, and rotational limb alignment; (3) preoperative bony deformity, including femoral torsion, condylar twist angle, and tibial torsion; and (4) preoperative and postoperative range of motion (ROM).

RESULTS

In multiple linear regression analysis using a stepwise procedure, postoperative rotational limb alignment was associated with the following: (1) rotation of the component position (tibia: β = 0.371, P < .0001; femur: β = -0.327, P < .0001), (2) preoperative rotational limb alignment (β = 0.253, P = .001), (3) postoperative flexion angle (β = 0.195, P = .007), and (4) tibial torsion (β = 0.193, P = .010).

CONCLUSION

In addition to component positions, the intrinsic factors, such as preoperative rotational limb alignment, ROM, and tibial torsion, affected postoperative rotational limb alignment. On a premise of correct component positions, the intrinsic factors that can be controlled by surgeons should be taken care. In particular, ROM is necessary to be improved within the possible range to acquire better postoperative rotational limb alignment.

The anteroposterior axis of the tibia is adjusted to approximately a right angle to the anterior pelvic plane in the standing position in patients with hip dysplasia similar to normal subjects: a cross-sectional study

BACKGROUND

We previously described that the anteroposterior (AP) axis of the tibia is approximately perpendicular to the transverse axis of the anterior pelvic plane (APP) in the standing position in healthy subjects. The purpose of this study was to investigate the rotational alignment between the APP and clinical epicondylar axis and the AP axis of the tibia relative to pelvic coordination in the standing position in normal subjects and in women with developmental dysplasia of the hip (DDH) to aid decision making for surgeons in the alignment of implants in total hip or knee arthroplasty.

METHODS

This study included 77 Japanese women. Twenty-nine in the DDH group underwent curved periacetabular osteotomy; 48 women without lumbago and knee pain were included in the normal group. Femoral neck anteversion (FNA), condylar twist angle, and knee rotation angle were measured in femoral coordination. The angle between the femoral neck axis and clinical epicondylar axis (CEA) was measured, the transverse axis of the APP was also measured, and the angle between the AP axis of the tibia and transverse axis of the APP was calculated.

RESULTS

There was a moderate negative correlation between FNA and CEA relative to the APP. This finding indicated a trend towards greater FNA leading to more internal rotation. Knee rotation angle (KRA) relative to the APP was 1.65° ± 5.58° in the normal group and - 2.65° ± 7.57° in the DDH group. This finding indicated that the tibia AP axis was approximately perpendicular to the APP in the standing position both in the normal and DDH groups.

CONCLUSION

We found that the tibia AP axis was at approximately a right angle to the transverse axis of the APP in the standing position in both the normal and DDH groups, while the KRA was different in the normal and DDH groups. These findings may prove helpful for positional alignment investigations needed for implantation in total hip or knee arthroplasty and gait analysis.

Tibial component coverage and rotational alignment accuracy after mobile-bearing total knee arthroplasty

BACKGROUND

Tibial component coverage (TCC) and tibial rotational angle (TRA) have been studied simultaneously in simulations, but not in clinical studies after total knee arthroplasty (TKA). The purposes of this study were (1) to evaluate TCC and rotational setting postoperatively in mobile-bearing TKA patients and (2) to compare the results with previously published simulation data.

METHODS

We prospectively examined 100 patients who underwent primary TKA using the LCS^® Total Knee System (LCS) posterior cruciate ligament-substituting prosthesis. Clinical outcomes, TCC (coverage area of the tibial component over the tibia), and TRA (relative to the femoral transepicondylar axis (TEA)) were assessed. Quantitative three-dimensional computed tomography was used to assess TCC and TRA. All values are expressed as median (25th percentile, 75th percentile) using minus (-) for internal and plus (+) for external rotation.

RESULTS

Hospital for Special Surgery scores improved from 46 (36, 50) preoperatively to 92 (90, 92) postoperatively. TRA showed a median divergence of - 2.0° (- 4.75°, + 2.74°). All knees were located within 10° of the TEA (range - 10.0° to + 9.7°). The median TCC of the knees was 82.7% (80.6, 84.7%), and there were no knees that hung over the tibial component in any direction.

CONCLUSIONS

The LCS prosthesis had good clinical outcomes, comparable TCC, and improved TRA as compared to previous reports, as all knees were located within 10° of the TEA. Simultaneous optimization of both TCC and TRA may contribute to the excellent long-term outcomes that have been observed with this system.

LEVEL OF EVIDENCE

Level II, Prognostic study.

Association between anteroposterior laxity in mid-range flexion and subjective healing of instability after total knee arthroplasty

PURPOSE

Flexion instability following total knee arthroplasty (TKA) is a common indication of early revision. The association between the objective anteroposterior (AP) laxity direction in mid-range flexion and the subjective healing of instability remains unclear; thus, this study aimed to clarify this association.

METHODS

In this study, 110 knees (74 females, 92 knees; 16 males, 18 knees) with medial pivot implants were examined with a median age of 79 (range 60-92) years for a median follow-up duration of 22 (range 6-125) months. AP laxity was measured using a KT-1000 arthrometer. Self-reported knee instability score was used for the subjective healing of instability.

RESULTS

Eighty-seven knees did not feel unstable (Group 0), whereas 23 knees felt unstable (Group 1). There was a significant difference in AP displacement [Group 0: median 6 mm; range 2-15 mm and Group 1: median 8 mm; range 4-14; p < 0.0001]. The threshold value of 7 mm was determined using the area under receiver operating characteristic curve of 0.79 [95% confidence interval (CI) 0.69-0.88, p < 0.0001]. In multivariate analysis, AP displacement of ≥7 mm was an independent risk factor for feelings of instability (odds ratio 7.695; 95% CI 2.306-25.674; p = 0.001).

CONCLUSIONS

AP laxity of ≥7 mm represents a known cause of feelings of instability. By controlling AP laxity in TKAs, without stiffness in the knee, it is possible to prevent feelings of instability. The clinical relevance is that AP laxity of <7 mm is one of the target areas in TKA.

LEVEL OF EVIDENCE

IV.

The anteroposterior axis of the tibia is approximately perpendicular to the anterior pelvic plane in the standing position in healthy Japanese subjects

Background

We previously reported that the clinical epicondylar axis (CEA) was approximately parallel to the transverse axis of the anterior pelvic plane (APP) in the standing position in normal subjects. The purpose of this study was to investigate the rotational alignment between APP in the standing position and the anteroposterior (AP) axis of the tibia relative to pelvic coordination in normal subjects.

Methods

This study included 68 healthy Japanese, 24 males and 44 females, without lumbago and knee pain. Femoral neck anteversion (FNA), condylar twist angle, and knee rotation angle were measured in femoral coordination. The angle between the femoral neck axis and CEA transverse axis of APP was also measured, and the angle between the AP axis of the tibia and the transverse axis of APP was calculated. The mean value of knee rotation angle was 0.23° and 2.06° in male and female subjects, respectively.

Results

There was a moderate positive correlation between FNA and the femoral axis angle relative to the transverse axis of APP. The knee rotation angle relative to APP was 0.33° and 1.56° in male and female subjects, respectively, and the tibia AP axis was approximately perpendicular to the transverse axis of APP in the standing position. Regarding validation, we obtained high interclass correlation coefficients for both intraobserver and interobserver reliability.

Conclusion

We found that the knee rotation angle was almost 0° and that the tibia AP axis was approximately perpendicular to the CEA. The tibia AP axis was also approximately perpendicular to the transverse axis of the APP in standing position.

External torsion in a proximal tibia and internal torsion in a distal tibia occur independently in varus osteoarthritic knees compared to healthy knees

INTRODUCTION

The relative torsional angle of the distal tibia is dependent on a deformity of the proximal tibia, and it is a commonly used torsional parameter to describe deformities of the tibia; however, this parameter cannot show the location and direction of the torsional deformity in the entire tibia. This study aimed to identify the detailed deformity in the entire tibia via a coordinate system based on the diaphysis of the tibia by comparing varus osteoarthritic knees to healthy knees.

METHODS

In total, 61 limbs in 58 healthy subjects (age: 54 ± 18 years) and 55 limbs in 50 varus osteoarthritis (OA) subjects (age: 72 ± 7 years) were evaluated. The original coordinate system based on anatomic points only from the tibial diaphysis was established. The evaluation parameters were 1) the relative torsion in the distal tibia to the proximal tibia, 2) the proximal tibial torsion relative to the tibial diaphysis, and 3) the distal tibial torsion relative to the tibial diaphysis.

RESULTS

The relative torsion in the distal tibia to the proximal tibia showed external torsion in both groups, while the external torsion was lower in the OA group than in the healthy group (p < 0.0001). The proximal tibial torsion relative to the tibial diaphysis had a higher external torsion in the OA group (p = 0.012), and the distal tibial torsion relative to the tibial diaphysis had a higher internal torsion in the OA group (p = 0.004) in comparison to the healthy group.

CONCLUSION

The reverse torsional deformity, showing a higher external torsion in the proximal tibia and a higher internal torsion in the distal tibia, occurred independently in the OA group in comparison to the healthy group. Clinically, this finding may prove to be a pathogenic factor in varus osteoarthritic knees.

LEVEL OF EVIDENCE

Level Ⅲ.

Sex- and age-specific differences in femoral head coverage and acetabular morphology among healthy subjects-derivation of normal ranges and thresholds for abnormality

OBJECTIVE

We aimed to clarify sex- and age-specific differences in three-dimensional and anatomic characteristics of femoral head coverage and acetabular morphology in healthy subjects.

MATERIALS AND METHODS

The study included 120 healthy subjects (57 male, 63 female), stratified into groups according to age and sex. We used computed tomography data to measure various anatomic alignment parameters describing femoral head coverage and acetabular morphology.

RESULTS

The lateral sector angle in the coronal plane, anterior sector angle in the sagittal plane, and posterior sector angles in the axial plane, which characterize femoral head coverage, did not differ significantly between males and females. However, the Sharp angle in the coronal plane and acetabular anteversion in both the sagittal and axial planes were significantly larger in females than in males. Overall, the age-specific trends were similar between male and female subjects. Specifically, for both males and females, the values for parameters of femoral head coverage were significantly lower in younger subjects (<50 years) than in older subjects (≥50 years); the only exception was the posterior sector angle among females; regarding acetabular morphology, younger subjects showed significantly higher values for the acetabular roof obliquity and Sharp angle, but no difference between younger and older subjects was noted regarding acetabular anteversion in the sagittal or axial plane.

CONCLUSION

Our data regarding sex- and age-specific differences and estimated normal ranges for parameters characterizing femoral head coverage and acetabular morphology among healthy subjects can be used to predict normal hip morphology.

Sex differences in femoral deformity determined using three-dimensional assessment for osteoarthritic knees

PURPOSE

To characterize femoral deformities and determine sex differences in varus knee osteoarthritis (OA), femoral morphology and limb alignment were evaluated by using three-dimensional (3D) assessment, comparing healthy, elderly volunteers with osteoarthritic knees.

METHODS

A total of 178 lower limbs of 169 subjects with knee osteoarthritis (136 women, 33 men; mean age 74.9 ± 5.2 years) and 80 lower limbs of 45 healthy, elderly subjects (24 women, 21 men; mean age 65 ± 4.9 years) were examined. A 3D extremity alignment assessment system was used to examine the subjects under weight-bearing conditions on biplanar long-leg radiographs using a 3D-to-2D image registration technique. The evaluation parameters were (1) femoral bowing in the coronal plane, (2) femoral bowing in the sagittal plane, (3) femoral neck anteversion, (4) hip-knee-ankle angle, and (5) femoral torsion.

RESULTS

Higher femoral lateral bowing and slightly higher femoral internal torsion in the proximal diaphysis were observed in women with OA compared with healthy subjects. No difference in the higher varus malalignment, no alteration in the femoral anterior bowing, and no difference in the lower femoral neck anteversion were found between men and women when comparing healthy and OA subjects.

CONCLUSIONS

The higher femoral lateral bowing and slightly higher femoral internal torsion in the proximal diaphysis in women are possibly a structural adaptation to mechanical use. The clinical significance is that the femoral deformities and the sex differences in knee OA have the potential to improve the understanding of the aetiology of primary varus knee OA.

LEVEL OF EVIDENCE

IV.

Lower Limbs Alignment in Patients with a Unilateral Completely Dislocated Hip

Background:

Severe hip osteoarthritis is known to lead to secondary osteoarthritis of the knee joint. It is not clear whether contracture or a leg length discrepancy is more important in determining the knee alignment.

Methods:

In this study, 48 hips in 48 patients with a unilateral completely dislocated hip (Crowe IV) were recruited. The patients were divided into two groups (Crowe IVa and IVb). The Crowe IVa group had completely dislocation with psudo-articulation, and the Crowe IVb group had completely dislocation without psudo-articulation. The lower limb alignment was divided into three patterns according to the femorotibial angle; varus (≥176 degrees), neutral(170 to 175 degrees) and valgus(≤169 degrees).

Results:

The combination of valgus alignment on the affected side and varus alignment on the unaffected side, so-called “windswept deformity” was observed in 12.5% of the patients; this included 18.2% and 7.7%, in the Crowe IVa and Crowe IVb groups, respectively. The valgus alignment on the unaffected side, namely “long leg arthropathy,” was found to have occurred in 6.3% of the patients, including 13.6% of the patients in the Crowe IVa group; there were no cases of long “leg arthropathy” in the Crowe IVb group.

Conclusion:

The lower limb alignment on the unaffected side had a tendency to be varus in the Crowe IV patients. The “windswept deformity” was observed in each of the groups; however, “long leg arthropathy” was only found in the Crowe IVa group.

The Quadriceps Vector is Most Parallel to the Spherical Axis With Minimal Difference for Gender or Ethnicity

BACKGROUND

The extensor mechanism may be the key to kinematic alignment of total knee arthroplasty. The purpose of this study was to determine any differences in the direction of the quadriceps vector based on gender or ethnicity and to determine which anatomically derived alignment axis is closest to the quadriceps vector.

METHODS

Computed tomography scans and patient records for 14 Caucasians (9 men and 5 women) and 40 Japanese (19 men and 21 women) were evaluated. Three axes of alignment-anatomic, mechanical, and spherical-were identified, measured, and compared to the quadriceps vector in each case. Principal component analysis was used to determine the quadriceps vector by using 3-dimensional models of muscles on computed tomography scans.

RESULTS

No statistically significant differences in the orientation of the quadriceps vector were found based on gender or ethnicity, and the quadriceps vector was most closely aligned with the spherical axis.

CONCLUSION

Because the quadriceps is the primary knee extensor, the spherical axis therefore may be a ubiquitous guide to alignment of the arthroplasty knee based on motion.

Three-Dimensional Imaging Analysis of Unicompartmental Knee Arthroplasty Evaluated in Standing Position: Component Alignment and In Vivo Articular Contact

BACKGROUND

Component malalignment in unicompartmental knee arthroplasty (UKA) has been associated with contact stress concentration and poor clinical outcomes. However, there is a paucity of data regarding UKA component alignment and in vivo articular contact in weight-bearing position. This study aims to (1) quantify three-dimensional UKA component alignment and (2) evaluate the association between the component alignment and in vivo articular contact in standing position.

METHODS

Seventy-seven UKAs in 68 consecutive patients were imaged in standing position using a biplanar X-ray imaging acquisition system. The UKA models were imported into a virtual imaging environment and registered with component silhouette on X-ray image for determination of component position and contact location. Anatomic bony landmarks of the lower limb were digitized for quantification of the bone alignment.

RESULTS

The femoral component (FC) showed 1.6° ± 3.3° valgus, 6.5° ± 6.4° external rotation, and 2.4° ± 4.6° flexion. The tibial component (TC) showed 3.9° ± 4.5° varus, 4.4° ± 6.7° internal rotation, and 10.1° ± 4.6° tibial slope. The average contact point was located medially and posteriorly by 7.8 ± 7.6% and 0.7 ± 7.7% of TC dimensions to its center. Multiple regression analysis identified FC flexion as a significant variable affecting UKA anterior and/or posterior contact position (R = 0.549, P < .001).

CONCLUSION

This study demonstrated the highest variability of UKA component positioning in axial plane rotation for FC and TC. The association between FC flexion and anterior contact position suggests accurate implant positioning may be important in optimizing in vivo UKA contact behavior. Further studies are required to gain understanding of the influence of axial rotation variability on in vivo UKA contact kinematics during functional activities.

Assessment of accuracy and precision of 3D reconstruction of unicompartmental knee arthroplasty in upright position using biplanar radiography

This study aimed to evaluate the precision and accuracy of 3D reconstruction of UKA component position, contact location and lower limb alignment in standing position using biplanar radiograph. Two human specimens with 4 medial UKAs were implanted with beads for radiostereometric analysis (RSA). The specimens were frozen in standing position and CT-scanned to obtain relative positions between the beads, bones and UKA components. The specimens were then imaged using biplanar radiograph (EOS). The positions of the femur, tibia, UKA components and UKA contact locations were obtained using RSA- and EOS-based techniques. Intraclass correlation coefficient (ICC) was calculated for inter-observer reliability of the EOS technique. The average (standard deviation) of the differences between two techniques in translations and rotations were less than 0.18 (0.29) mm and 0.39° (0.66°) for UKA components. The root-mean-square-errors (RMSE) of contact location along the anterior/posterior and medial/lateral directions were 0.84mm and 0.30mm. The RMSEs of the knee rotations were less than 1.70°. The ICCs for the EOS-based segmental orientations between two raters were larger than 0.98. The results suggest the EOS-based 3D reconstruction technique can precisely determine component position, contact location and lower limb alignment for UKA patients in weight-bearing standing position.

Three-dimensional in vivo dynamic motion analysis of anterior cruciate ligament-deficient knees during squatting using geometric center axis of the femur

BACKGROUND

Anterior cruciate ligament (ACL) injury often leads to symptoms of instability, which may cause meniscus injury, osteochondral lesions, and degenerative changes. For thorough evaluation of the effects of abnormal motion of ACL-deficient (ACLD) knees on the meniscus and articular cartilage, it is necessary to assess tibiofemoral motion in the medial and lateral compartments separately. Our aim was to determine if in vivo three-dimensional (3D) dynamic motion of ACLD knees differs from that of contralateral uninjured knees by assessing knee motion in the medial and lateral compartments respectively.

METHODS

A total of 22 patients with an isolated ACL-injured knee were examined. 3D to two-dimensional registration was used to determine 3D knee motion during squatting from full knee extension to full flexion for both ACLD and contralateral uninjured knees. The knee motion was evaluated by the movement of the geometric center axis of the femur projected onto the tibial axial plane.

RESULTS

In ACLD knees the lateral femoral condyle was located significantly more posteriorly during nearly full extension than in contralateral uninjured knees. The range of anteroposterior translation of the medial femoral condyle was significantly greater than those of contralateral uninjured knees. Almost all of the contralateral uninjured knees demonstrated medial pivot motion, while the ACLD knees showed higher variance.

CONCLUSIONS

The ACLD knees exhibited a motion pattern different from those of contralateral uninjured knees with higher variance. During nearly full extension of the ACLD knees, the lateral femoral condyle translated posteriorly and the screw-home movement seemed to be impaired. The ACL might have an important role in maintaining normal knee function, especially during the early flexion phase. The larger range of anteroposterior translation of the medial femoral condyle in ACLD knees may be associated with a risk of secondary meniscal injury and degenerative change in the articular cartilage.

LEVEL OF EVIDENCE

Level IV.

Rotational alignment of tibial components in mobile-bearing TKA: posterior substituted vs. PCL retaining

PURPOSE

The medial border of the tibial tubercle (MBTT) is one of the fixed anatomic landmarks for tibial component setting during total knee arthroplasty (TKA). In mobile-bearing TKA using a tibial cut first technique, the final tibial component rotation can be guided by the position it achieves following several flexion-extension cycles. In this study, tibial component angle (TCA) and tibial rotational angle (TRA) were determined in dependence of retention or resection of the posterior cruciate ligament (PCL).

METHODS

The TCA and TRA were examined in 206 patients who underwent primary TKA (PCL retaining: 104 knees, PCL substituting: 102 knees). The tibial component rotation was intraoperatively setting between the parallel to the axis of the most medial aspect of the tibial tubercle as the anterior anatomic landmark and the center of the tibial component as the posterior landmark at the maximum coverage with the osteotomized tibial plateau with its adjustment after several knee flexion-extension exercises. A postoperative quantitative three-dimensional computed tomography technique was used for measurements by a single observer.

RESULTS

The TCA showed a divergence of 0.21° external to the MBTT in the PCL-retaining design and 1.62° internal divergence in the PCL-substituting design. The TRA showed an internal divergence of 0.88° in the PCL-retaining design and an internal divergence of 2.12° in the PCL-substituting design. There were no significant differences between the two designs.

CONCLUSIONS

The MBTT might be regarded as a reliable landmark for obtaining an acceptable tibial rotational setting in mobile-bearing TKA despite PCL retention.

The coronal alignment after medial unicompartmental knee arthroplasty can be predicted: usefulness of full-length valgus stress radiography for evaluating correctability

PURPOSE

We aimed to clarify whether the coronal alignment after medial unicompartmental knee arthroplasty (UKA) is predictable using preoperative full-length valgus stress radiography.

METHODS

Thirty-seven consecutive patients with a mean age of 71.5 ± 7.0 years awaiting medial UKA were recruited. Full-length weight-bearing radiographs of the lower limbs were obtained pre- and postoperatively. Preoperative full-length valgus stress radiography in the supine position was also performed, and the transition of the hip-knee-ankle angle (HKAA) and the weight-bearing ratio were assessed. The tibia first cut technique was used, and the distal femur was cut parallel to the cutting surface of the proximal tibia during surgery.

RESULTS

The mean postoperative HKAA was 2.0° ± 2.1° varus, and the mean weight-bearing ratio was 43.1 ± 7.7 %; each of these parameters demonstrated significantly strong correlations with the values on the preoperative valgus stress radiographs (p < 0.01), while the correlation between the postoperative alignment and the preoperative standing alignment without stress was moderate (p < 0.01). The postoperative alignment was slightly undercorrected compared to that observed on the valgus stress radiographs (p < 0.05), and no knees exhibited evident overcorrection compared to that on the valgus stress radiographs.

CONCLUSION

Preoperative valgus stress radiography is useful for evaluating the correctability of varus deformities and predicting the postoperative coronal alignment. For clinical relevance, performing preoperative valgus stress radiography would help to more precisely select patients and, when combined with the tibia first cut technique, aid in achieving the expected knee alignment and avoid severe undercorrection or overcorrection.

LEVEL OF EVIDENCE

Diagnostic study, Level II.

Change in tibiofemoral rotational alignment during total knee arthroplasty

BACKGROUND

Rotational mismatch between femoral and tibial components has been recognized as a risk factor of unsuccessful total knee arthroplasty (TKA), but a main cause of rotational mismatch is uncertain. This study aims to evaluate rotational alignment of the knee by measuring both component rotation and version of the knee in TKA.

METHOD

Fifty-one TKAs (mean age 73.7 years) were included in this study. The three dimensional, weight-bearing knee alignment was measured before and after TKA. A transepicondylar axis was referenced to femoral component rotation, and an anteroposterior axis of the tibia (middle of posterior cruciate ligament attachment to medial border of patella tendon attachment) was referenced to tibial component rotation. Knee rotational angle was defined as the angle between these two axes.

RESULT

The mean preoperative knee rotation angle of 9.7° (±8.5°) internal rotation was significantly reduced to 1.8° (±7.3°) external rotation after TKA. Twenty-one of 51 knees (41%) exhibited rotational mismatch (>10°) preoperatively, and this number was reduced to eight knees (16%) post-TKA. The femoral component was rotationally aligned within 5° of neutral in all knees, while rotational alignment of the tibial component showed a high degree of variability (range 20.7° internal rotation to 17.2° external rotation).

CONCLUSION

Rotational malposition of the tibial component was considered to be a main factor of rotational mismatch of the knee after TKA.

Retention of the posterior cruciate ligament does not affect femoral rotational alignment in TKA using a gap-balance technique

PURPOSE

Previous studies have evaluated the ability of the gap technique to achieve accurate rotational placement in both posterior cruciate ligament (PCL)-retaining and PCL-substituting total knee arthroplasty (TKA). The purpose of the present study was to determine (1) the accuracy of this technique in degrees and (2) whether retention of the PCL affects the rotational alignment of the femoral component relative to the transepicondylar axis during TKA. The hypothesis of this study was that retention of the PCL does not affect the femoral rotational alignment in TKA using a gap-balancing technique because both procedures are reported to have good long-term clinical outcomes.

METHODS

The femoral rotation angle (FRA) relative to the transepicondylar axis was examined in 206 patients who underwent primary TKA using either PCL-retaining (104 knees) or PCL-substituting (102 knees) prostheses to determine the effect of PCL retention on FRA. Quantitative three-dimensional computed tomography was used to assess the FRA in both groups. All values are expressed as median (25th percentile, 75th percentile).

RESULTS

Postoperative FRA in the PCL-retaining group was -1.1° (-2.8°, 2.2°) and in the PCL-substituting group was -0.1° (-2.5°, 2.8°). The groups were not statistically different. One outlier was found in the PCL-retaining group, and none was found in the PCL-substituting group.

CONCLUSIONS

The gap technique reliably allows accurate rotational alignment of the femoral component during TKA despite the retention of the PCL.

LEVEL OF EVIDENCE

Therapeutic study, Level II.

An Automatic Three-Dimensional Evaluation of Screw Placement After Anterior Cruciate Ligament Reconstruction Using MDCT Images

A metallic interference screw, which is a fixation device used in anterior cruciate ligament (ACL) reconstruction, is important for fixing the grafts to the tibia. Loosening of fixation sometimes happens because the screw is displaced time passes, which results in instability of the knee. It is therefore important to analyze screw displacement highly accurately. The purpose of this study is to propose an evaluation of screw displacement in MDCT imaging of the knee after ACL reconstruction. Clinical experiments used 22 MDCT images that are not displaced in the clinical sense. Results of simulation experiments show that error was 0.14 mm, which was less thanMDCT image resolution. This study concluded that the proposed method useful in evaluating two MDCT images at different time points.

Leg length discrepancy and lower limb alignment after total hip arthroplasty in unilateral hip osteoarthritis patients

BACKGROUND

Leg length discrepancy (LLD) following total hip arthroplasty (THA) is a leading cause of patient dissatisfaction. However, no reports have described the influence of lower limb alignment on LLD after THA. In the present study, we firstly investigated the change in lower limb alignment after THA. Secondly, we determined the influence of lower limb alignment on LLD after THA. Thirdly, we evaluated the influence of LLD in the entire lower leg on the clinical outcomes after THA.

METHODS

We followed up with 54 unilateral hip osteoarthritis (OA) patients 1 year after THA. For the radiological assessment of LLD and lower limb alignment, we obtained anteroposterior radiographs of the pelvis and both lower legs in entirety in a standing position before and 1 year after THA. The Harris Hip Score (HHS), Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), and Medical Outcomes Study Short-Form 36-Item Health Survey (SF-36) were also obtained to assess the clinical outcome.

RESUTS

The alignment of the affected leg, which was more valgus than the unaffected leg before THA, tended toward varus after THA, and the discrepancy between the lower limb alignments on both sides decreased. However, the alignment discrepancies that remained after THA influenced the LLD measured on the radiograph of the entire lower leg, and this LLD influenced the clinical outcome as measured by the HHS and the WOMAC score.

CONCLUSIONS

LLD in the entire lower leg should be corrected for a better clinical outcome after THA.

Posterior condylar offset does not correlate with knee flexion after TKA

BACKGROUND

Studies of medial and lateral femoral posterior condylar offset have disagreed on whether posterior condylar offset affects maximum knee flexion angle after TKA.

QUESTIONS/PURPOSES

We asked whether posterior condylar offset was correlated with knee flexion angle 1 year after surgery in (1) a PCL-retaining meniscal-bearing TKA implant, or in (2) a PCL-substituting mobile-bearing TKA implant.

METHODS

Knee flexion angle was examined preoperatively and 12 months postoperatively in 170 patients who underwent primary TKAs to clarify the effect of PCL-retaining (85 knees) and PCL-substituting (85 knees) prostheses on knee flexion angle. A quasirandomized design was used; patients were assigned to receive one or the other implant using chart numbers. A quantitative three-dimensional technique with CT was used to examine individual changes in medial and lateral posterior condylar offsets.

RESULTS

In PCL-retaining meniscal-bearing knees, there were no significant correlations between posterior condylar offset and knee flexion at 1 year. In these knees, the mean (± SD) postoperative differences in medial and lateral posterior condylar offsets were 0.0 ± 3.6 mm and 3.8 ± 3.6 mm, respectively. The postoperative change in maximum knee flexion angle was -5° ± 15°. In PCL-substituting rotating-platform knees, similarly, there were no significant correlations between posterior condylar offset and knee flexion 1 year after surgery. In these knees, the mean postoperative differences in medial and lateral posterior condylar offsets were -0.5 ± 3.3 mm and 3.3 ± 4.2 mm, respectively. The postoperative change in maximum knee flexion angle was -2° ± 18°.

CONCLUSIONS

Differences in individual posterior condylar offset with current PCL-retaining or PCL-substituting prostheses did not correlate with changes in knee flexion 1 year after TKA. We should recognize that correctly identifying which condyle affects the results of the TKA may be difficult with conventional radiographic techniques.

Pelvic flexion measurement from lateral projection radiographs is clinically reliable

BACKGROUND

Pelvic flexion affects orientation of the acetabular cup; however, pelvic position is not static in daily activities. During THA it is difficult to know the degree of pelvic flexion with the patient in the lateral position and that position is static. However, surgeons need to appropriately determine pelvic tilt to properly insert the acetabular component.

QUESTIONS/PURPOSES

We investigated the reliability of pelvic flexion angle that was measured by manually identifying the location of the pubic symphysis and bilateral anterior superior iliac spines using synthesized lateral radiographs.

METHODS

We synthesized 49 lateral radiographs based on CT data. Each of the 49 radiographs had a unique position: 7° of varying lateral tilt and rotation in each of seven selected pelvic flexion angles. The pelvic flexion angle was measured three times by three independent observers in each position and determined the accuracy (based on the true value from the reconstructions) and reliability of the measures.

RESULTS

The measurement error was 0.1° (range, -4.8° to 4.0°). There was a tendency for errors when the pelvic flexion angle was 0° or ±5°; the errors were less when the pelvic flexion angle was ±10° or ±20°. Lateral tilt was associated with greater error than rotation. The intraclass correlation coefficient (ICC) of the average value was 0.967. For one observer, more than two measurements are necessary for the ICC to be greater than 0.8, and only one measurement was needed for two of the three observers.

CONCLUSIONS

Our data suggest measurement of pelvic flexion angle using lateral radiographs is reliable. We recommend the measurement be performed once by two observers for better reliability.

Evaluation of a new low-dose biplanar system to assess lower-limb alignment in 3D: a phantom study

OBJECTIVE

Knee coronal alignment is routinely assessed on a full-length radiograph of the lower limbs. However, poor positioning of the knee during the procedure affects the accuracy of this kind of measurement, particularly in cases combining knee rotation and flexion. The purpose of this study was to assess the value of a three-dimensional assessment of the hip-knee-ankle (HKA) angle based on a biplanar radiographic system.

MATERIALS AND METHODS

A biplanar slot scanning system was used to take radiographs of three lower-limb synthetic models with similar frontal deviation (5° valgus) but different flexion angulations (0°, 9°, and 18°). Biplane acquisitions were done with lower-limb axial rotations ranging from 20° of internal rotation to 20° of external rotation on each of the lower limb models. Three independent observers performed standard 2D measurements of the HKA angle from each anteroposterior (AP) image and also modeled the lower limb in 3D for each biplane acquisition with dedicated software. The HKA angle was automatically calculated from the 3D models. The results of the 2D and 3D techniques were compared.

RESULTS

Axial rotation provoked 2D HKA measurement errors up to, respectively, 1.4°, 4.7°, and 6.8° for the lower extremities with 0°, 9°, and 18° flexion, while it never affected the 3D HKA measurement for more than 1.5°. Interobserver errors were 0.7° (SD = 0.5°) for the 2D measurements and 0.6° (SD = 0.4°) for the 3D measurements.

CONCLUSIONS

The 3D modeling allows for a more accurate evaluation of coronal alignment compared to 2D, eliminating bias due to wrong knee positioning.

Changes in lower extremity 3-dimensional load-bearing axes before and after mobile-bearing total knee arthroplasty

This study evaluated changes in the lower extremity 3-dimensional load-bearing mechanical axes in the anteroposterior and mediolateral directions before and at 3 weeks after mobile-bearing total knee arthroplasty. The effects of the degrees of anteroposterior constraint of the designs on the location of the load-bearing mechanical axis at the knee joint level were also assessed. We evaluated 151 knees from 134 patients with 74 knees receiving meniscal bearing-type and 77 knees receiving rotating platform-type prostheses. In the mediolateral direction, both designs showed significant improvements, whereas in the anteroposterior direction, they revealed no improvements postoperatively and were worsened significantly in meniscal bearing type. Differences in the degree of bone and soft tissue involvement for the correction of alignment may explain the findings.