Results at a minimum of 10 years of follow-up for AMS and PerFix HA-coated cementless total hip arthroplasty: impact of cross-linked polyethylene on implant longevity

Rate of revision and wear penetration in different polyethylene liner compositions in total hip arthroplasty: a Bayesian network meta-analysis

The present Bayesian network meta-analysis compared different types of polyethylene liners in total hip arthroplasty (THA) in terms of wear penetration (mm/year) and rate of revision. The type of liners compared were the crosslinked ultra-high molecular weight polyethylene (CPE/UHMWPE), Vitamin E infused highly cross-linked polyethylene (HXLPE-VEPE), modified cross-linked polyethylene (MXLPE), highly cross-linked polyethylene (HXLPE), Cross-linked polyethylene (XLPE). This study was conducted according to the PRISMA extension statement for reporting systematic reviews incorporating network meta-analyses of healthcare interventions. In June 2024, PubMed, Scopus, Embase, Google Scholar, and Cochrane databases were accessed. A time constraint was set from January 2000. All investigations which compared two or more types of polyethylene liners for THA were accessed. Only studies that clearly stated the nature of the liner were included. Data from 60 studies (37,352 THAs) were collected. 56% of patients were women. The mean age of patients was 60.0 ± 6.6 years, the mean BMI was 27.5 ± 2.0 kg/m2. The mean length of follow-up was 81.6 ± 44.4 months. Comparability was found at baseline between groups. XLPE and HXLPE liners in THA are associated with the lowest wear penetration (mm/year) and the lowest revision rate at approximately 7 years of follow-up.

Evaluation of Two Clinical Stem-Fit Philosophies Within the Femoral Canal Using a Preoperative Planning Tool: Could a Hybrid Approach Be Best?

BACKGROUND

Total hip arthroplasty (THA) has transformed patient lives, yet evolving expectations and the number of postoperative foot angle changes have underscored the need for precise component positioning. The objective of this study was to use 3-dimensional (3D) preoperative planning to evaluate stem alignment and orientation for three THA systems using two different stem-fit algorithms. It was hypothesized that the different stem alignments would yield similar changes in stem orientation and placement within the canal for all 3 systems.

METHODS

This study introduced a novel 3D preoperative planning tool, comparing two different surgical stem-fit philosophies within the canal: "canal fit" (CF) and "anatomical fit" (AF). We virtually implanted 10 subjects with three different THA implant systems using both philosophies, evaluating 60 total fits within the canals. The CF philosophy aimed to minimize cortical bone removal. In contrast, the AF philosophy prioritized aligning the implanted head with the anatomical head center.

RESULTS

Detailed analyses revealed that AF led to fixation occurring mainly on the medial aspect of the stem, while CF exhibited a more even distribution between medial and lateral sides. The AF philosophy achieved significantly closer placement of the implanted head to the anatomical center (2.0 to 2.1 mm) compared to the CF philosophy (3.0 to 6.0 mm) (P < 0.01). The AF resulted in neutral stem orientation (0°) across all stems, whereas the CF exhibited greater malrotation (2.0 to 7.0°) (P < 0.02). The AF required more bone removal (0.13 to 0.46 cm³) than the CF (0.02 to 0.06 cm³) (P < 0.01).

CONCLUSIONS

The findings underscore the importance of 3D planning, emphasizing its potential to improve stem version alignment in THA. The results from this study may advocate 3D preoperative planning with robotic surgery to plan stem placement within the canal while maintaining anatomical femoral head restoration.

A large preoperative pelvic oblique angle affects perception of leg length discrepancy after total hip arthroplasty

BACKGROUND

In some cases, patients feel a perceived leg length discrepancy (P-LLD) despite no radiographic leg length discrepancy (R-LLD) after total hip arthroplasty (THA). We aimed to investigate the rate of postoperative P-LLD and the factors that cause postoperative P-LLD.

METHODS

A retrospective study was conducted on 100 patients with R-LLD ≤5 mm after THA. Patients were classified into two groups based on P-LLD post-THA: group P (with P-LLD) and group E (without P-LLD). Relevant data on the general characteristics and radiological findings between the two groups were compared.

RESULTS

We observed that 25 & 75% of patients belonged to group P and group E, respectively, with no significant difference in patient background. Postoperative Japanese Orthopedic Association (JOA) classification of pain and activities of daily living scores were significantly lower in group P than in group E (37.2 ± 3.9 vs. 39.1 ± 2.2, respectively; P = 0.013, and 16.2 ± 4.2 vs. 18.2 ± 2.2, respectively; P = 0.011). The preoperative pelvic oblique angle (POA) was significantly larger in group P than in group E (3.3 ± 2.3° vs. -0.2 ± 2.1°; respectively; P < 0.01). The pelvis tilted toward the surgical side was significantly higher in group P than in group E(88% vs 57%; respectively; P = 0.013). The preoperative C7 coronal vertical axis (C7 CVA) was significantly larger in group P than in group E (6.7 ± 14.7 mm vs. -0.2 ± 10.3 mm; respectively; P = 0.028). Multivariate logistic analysis revealed that preoperative POA (OR, 3.71; 95% CI: 1.86-8.12; P < 0.01) and the pelvis tilted toward the surgical side (OR, 4.14; 95% CI: 2.07-9.71; P = 0.022) were independent risk factors for P-LLD after THA.

CONCLUSION

Even though there was no postoperative R-LLD, 25% of patients had P-LLD. A large preoperative POA and the pelvis tilted toward the surgical side were independent risk factors for P-LLD after THA.

Head, acetabular liner composition, and rate of revision and wear in total hip arthroplasty: a Bayesian network meta-analysis

Total hip arthroplasty (THA) is a common procedure for patients suffering from hip pain e.g. from osteoarthritis, osteonecrosis, or hip fractures. The satisfaction of patients undergoing THA is influenced by the choice of implant type and material, with one key factor being the selection of the appropriate material combination for the bearing surface. In this Bayesian network meta-analysis, we investigated the impact of material combinations for the bearing surface on the longevity of hip implants. The wear penetration rate per year and the total wear penetration in the liner resulting from different material combinations, as well as the survival rate at last follow-up, were examined. We analyzed a total of 663,038 THAs, with 55% of patients being women. Mean patient age was 59.0 ± 8.1 years and mean BMI 27.6 ± 2.6 kg/m2. The combination of an aluminium oxide (Al2O3) head and an Al2O3 liner demonstrated the lowest wear penetration at last follow-up and the lowest rate of wear penetration per year. Additionally, the combination of a crosslinked polyethylene (XLPE) liner and a zircon oxide (ZrO2) head demonstrated the lowest rate of revision at last follow-up. These findings underscore the importance of careful material selection for hip implant bearing surfaces to optimize their longevity and patient satisfaction after THA.

Risk factors for liner wear and head migration in total hip arthroplasty: a systematic review

Total hip arthroplasty (THA) is a successful orthopaedic surgical procedure, and its longevity depends on bearing components and implant fixation. Optimizing polyethylene and ceramics has led to improved wear parameters and contributed to improved long-term outcomes. The present systematic review investigated whether time span from implantation, patient characteristics and performance status exert an influence on liner wear and head migration in THA. This study was conducted in conformity to the 2020 PRISMA guidelines. All the clinical investigations which reported quantitative data on the amount of liner wear and head migration in THA were considered. Only studies which reported quantitative data at least on one of the following patient characteristics were suitable: mean age, mean BMI (kg/m2), sex, side, time span between the index THA and the last follow-up (months) were eligible. A multiple linear model regression analysis was employed to verify the association between patient characteristics and the amount of liner wear and/or head migration. The Pearson Product-Moment Correlation Coefficient was used to assess the association between variables. Data from 12,629 patients were considered. The mean length of the follow-up was 90.5 ± 50.9 months. The mean age of patients at surgery was 58.4 ± 9.4 years, and the mean BMI was 27.2 ± 2.5 kg/m2. 57% (7199 of 12,629 patients) were women, and in 44% (5557 of 12,629 patients) THAs were performed on the left. The mean pre-operative Harris hip score was 46.5 ± 6.0 points. There was evidence of a moderate positive association between the amount of liner wear and the time elapsed between the index surgery to the follow-up (P = 0.02). There was evidence of a moderate positive association between the amount of head migration and the time elapsed between the index surgery to the follow-up (P = 0.01). No further statistically significant association was found. The time elapsed between the index surgery to the follow-up was the most important factor which influence the head migration and liner wear in THA. Patients' characteristics and preoperative physical activity did not influence the amount of head migration and liner wear.

Long-term outcome of primary total hip arthroplasty with cementless bioactive glass ceramic bottom-coated implants and highly cross-linked polyethylene: A minimum 10-year analysis

BACKGROUND

Cementless glass ceramics containing apatite and wollastonite (AW-GC) bottom-coated titanium hip implants were developed; early excellent clinical and radiographic results have been reported previously. This study aimed to investigate the long-term clinical and radiographic outcomes in detail, and the wear rate of HXLPE.

METHODS

We retrospectively evaluated 99 patients (117 hips) between November 2001 and December 2007. The survival rate was estimated using the Kaplan-Meier method. Hip joint function was evaluated using the Japanese Orthopaedic Association (JOA) score. The extent of radiographic signs was determined from the radiographs performed at the last follow-up. Polyethylene wear was measured using Martell's Hip Analysis Suite. We assessed the possible factors affecting the steady-state linear wear rate.

RESULTS

The mean follow-up period was 14.8 ± 2.1 (10-18.6) years. The mean JOA score improved to 88.7 ± 9.4 (59-100) at the final follow-up from 47.8 ± 12.5 (17-76) before surgery. The overall survival rate with the end point of all-cause revision and wear-related revision was 99% and 100% respectively. There was no osteolysis or loosening of either the acetabular or femoral component. All hips were classified as having bone ingrowth fixation. The mean steady-state wear rate was 0.008 ± 0.025 mm/year. We found no significant correlation between the wear rate and age, body weight, body mass index, cup inclination and femoral head size.

CONCLUSION

The combination of AW-GC bottom-coated implants and HXLPE showed excellent implant survival and wear resistance for 15 years.

Objective Activity Levels and Patient-Reported Outcomes After Total Hip Arthroplasty and Periacetabular Osteotomy: Retrospective Matched Cohort Study at Mean 12-Year Follow-Up

BACKGROUND

There is increasing interest in improving activity after total hip arthroplasty (THA) and periacetabular osteotomy (PAO). The present study evaluated whether there were differences in the subjective and objective activity levels of THA and PAO patients at mean 12-year follow-up (range 4-20) and what factors influence the objective activity levels.

METHODS

THA and PAO patients (30 patients each; mean age: 66 and 63 years, respectively), who had undergone surgery for osteoarthritis due to acetabular dysplasia, were included. Patients were retrospectively matched based on age, gender, body mass index, follow-up duration, and preoperative University of California, Los Angeles activity score (UCLA score). Patients were surveyed for the subjective activity levels using the Oxford Hip Score and UCLA score. Objective activity levels (the number of steps, upright time, and the number of sit-to-stand transitions) were made using an accelerometer.

RESULTS

There was no significant difference in subjective activity level between THA and PAO patients. The number of steps was significantly higher in PAO than in THA patients. Multivariable analyses revealed that THA and low Oxford Hip Score activities of daily living were negatively associated with the number of steps, that men and high UCLA score were negatively associated with upright time, and that high body mass index was negatively associated with sit-to-stand transitions in THA and PAO patients.

CONCLUSION

This study suggested that although there was no difference in postoperative subjective activity level between THA and PAO patients, there was a difference in objective activity level. Providing guidance to these patients based on objective activity may lead to higher activity levels.

Differences in peri-hip articular pain after total hip arthroplasty between taper wedge stem and fit-and-fill stem

Background

Total hip arthroplasty (THA) for hip disorders helps to alleviate pain and improve active daily life. When determining the effects of medical therapy and the subsequent clinical results, patient quality of life (QOL) also needs to be assessed. Recently, patient-reported outcomes (PRO) have become important as evaluation criteria. This study aimed to evaluate patient QOL and various PRO between different types of cementless stems and to clarify the relationship between PRO and stem-cortical bone contact.

Methods

The study comprised 138 consecutive patients undergoing cementless THA for hip osteoarthritis. We assessed three different types of PRO: the Japanese Orthopaedic Association Hip-Disease Evaluation Questionnaire (JHEQ), patient's joint perception, and peri-hip articular joint pain (PHAP). We measured the state of contact between femur and implant by density mapping.

Results

No significant difference was noted in PRO between stem types based on the JHEQ and patient's joint perception. PHAP occurred more frequently in the patients with a taper wedge stem versus a fit-and-fill stem. In both groups, distal contact was associated with PHAP but not with JHEQ results and patient's joint perception.

Conclusion

The difference in PHAP between the two stem types groups was significant, with postoperative PHAP being higher with the taper wedge stem because of the more distal contact between the taper wedge stem and femur cortical bone.

Long-Term Wear-Related Complications of Cross-Linked Versus Conventional Polyethylene After Total Hip Arthroplasty: A Meta-Analysis

BACKGROUND

Highly cross-linked polyethylene (HXLPE) liners have been developed to address the wear-related problems associated with conventional polyethylene (CPE) such as osteolysis or aseptic loosening in total hip arthroplasty (THA). In this systematic meta-analysis, we compared the long-term efficacy in preventing radiological osteolysis and revision surgery between HXLPE and CPE.

METHODS

We included 14 studies that compared HXLPE and CPE reporting the incidence of wear-related complications with a minimum follow-up of 10 years. We investigated 5 wear-related complications: osteolysis, excessive wear, linear wear rate, revision surgery due to wear, and progress of osteolysis/aseptic loosening. We conducted a pair-wise meta-analysis to estimate odds ratio (OR) and a proportional meta-analysis to estimate the incidence of each complication.

RESULTS

Among 1,175 THAs, 220 osteolysis and 78 wear-related revisions were detected. The use of HXLPE reduced the risk of overall osteolysis (OR 0.30; P = .001), excessive wear (OR 0.10; P < .001), linear wear rate (weighted mean difference 0.09; P < .001), the risk of overall wear-related revisions (OR 0.06; P < .001), and revisions due to aseptic loosening (OR 0.23; P = .015). As per the proportional meta-analysis, the pooled prevalence of osteolysis, excessive wear, and the overall wear-related revision rate were 14%, 8%, and 3% in HXLPE and 25%, 33%, and 20% in CPE, respectively.

CONCLUSION

The current evidence shows that HXLPE dramatically reduced the rate of osteolysis and wear-related revision surgery. However, as polyethylene wear and osteolysis still lead to revision surgery, ongoing clinical and retrieval studies are required to analyze long-term outcomes.

A propensity score-matched comparison of patient satisfaction following periacetabular osteotomy or total hip arthroplasty for developmental dysplasia of the hip in an Asian cohort

BACKGROUND

No studies have compared patient satisfaction between periacetabular osteotomy (PAO) and total hip arthroplasty (THA) for osteoarthritis (OA) secondary to developmental dysplasia of the hip (DDH) in Asian cohorts.

METHODS

Multivariate analyses were applied to determine whether patient demographics and postoperative patient-reported outcomes were correlated with postoperative patient satisfaction in 737 DDH patients (251 PAO and 486 THA patients). Additionally, postoperative patient satisfaction, Oxford Hip Score (OHS), University of California-Los Angeles (UCLA) activity score, and sports participation were compared between propensity-matched PAO and THA patients for OA secondary to DDH (Kellgren-Lawrence grade II: 32 PAO and 16 THA patients, grade III: 20 PAO and 40 THA patients).

RESULTS

Of the 737 patients, 663 patients (90%) were postoperatively satisfied. Multivariate analysis demonstrated that THA was positively correlated with patient satisfaction. Furthermore, high postoperative OHS-pain, OHS-ADL, and UCLA scores were positively correlated with satisfaction. In propensity-matched PAO and THA patients, PAO elicited greater patient satisfaction than THA for KL grade II OA secondary to DDH, with comparable postoperative OHS (including the pain and ADL subscale), UCLA score, and sports participation rate. In contrast, THA resulted in better satisfaction and OHS-pain for KL grade III OA secondary to DDH, with comparable postoperative OHS-ADL, UCLA score, and sports participation rate in the 2 surgeries.

CONCLUSIONS

Both PAO and THA procedures offer distinct patient satisfaction advantages based on preoperative OA severity. These findings can assist in the clinical decision-making process for the surgical treatment of middle-aged patients with symptomatic DDH.

A Review of Anodized TiNbSn Alloys for Improvement in Layer Quality and Application to Orthopedic Implants

Titanium alloys are useful for application in orthopedic implants. However, complications, such as prosthetic infections and aseptic loosening, often occur after orthopedic devices are implanted. Therefore, innovation in surface modification techniques is essential to develop orthopedic materials with optimal properties at the biomaterial–bone interface. In this review, we present recent research on the improvement in the osteoconductivity and antibacterial effect of the Ti-33.6% Nb-4% Sn (TiNbSn) alloy by anodic oxidation and other related studies. TiNbSn alloys are excellent new titanium alloys with a low Young’s modulus, high tensile strength, and with gradient functional properties such as a thermally adjustable Young’s modulus and strength. Titanium dioxide (TiO₂), when obtained by the anodic oxidation of a TiNbSn alloy, improves bone affinity and provides antibacterial performance owing to its photocatalytic activity. The safety of TiO₂ and its strong bonding with metal materials make its method of preparation a promising alternative to conventional methods for improving the surface quality of orthopedic implants. Implementing anodization technology for TiNbSn alloys may alleviate orthopedic surgery-related complications, such as loosening, stress shielding, and infection after arthroplasty.

Squatting After Total Hip Arthroplasty: Patient-Reported Outcomes and In Vivo Three-Dimensional Kinematic Study

BACKGROUND

Squatting is an important function for many daily activities, but has not been well documented after total hip arthroplasty (THA). This study investigated the participation rate of squatting and in vivo kinematics during squatting.

METHODS

A survey questionnaire about squatting was mailed to patients who underwent primary THA and 328 patients returned acceptable responses. Additionally, 32 hips were evaluated for dynamic 3-dimensional kinematics of squatting using density-based image-matching techniques. Multivariate analyses were applied to determine which factors were associated with anterior liner-to-neck distance at maximum hip flexion.

RESULTS

Patients who could easily squat significantly increased this ability postoperatively (23.5% vs 46%, P < .01). In 29.5% of the patients there was still no ability to squat after THA; the main reason was anxiety of dislocation (34.2%). Kinematic analysis revealed that maximum hip flexion averaged 80.7° ± 12.3° with 12.8° ± 10.7° of posterior pelvic tilt and 9.7 ± 3.0 mm of anterior liner-to-neck distance. Neither liner-to-neck, bone-to-bone, nor bone-to-implant contact was observed in any of the hips. Larger hip flexion and smaller cup anteversion were negatively associated with the anterior liner-to-neck distance at maximum hip flexion (P < .05).

CONCLUSION

Postoperatively, approximately 70% of patients squatted easily or with support. Anxiety of dislocation made patients avoid squatting after THA. In vivo squatting kinematics suggest no danger of impingement or subsequent dislocation, but excessively large hip flexion and small cup anteversion remain as risks.

Wear resistance of first-generation highly cross-linked annealed polyethylene in cementless total hip arthroplasty is maintained 20 years after surgery

AIMS

The aim of this study was to evaluate the performance of first-generation annealed highly cross-linked polyethylene (HXLPE) in cementless total hip arthroplasty (THA).

METHODS

We retrospectively evaluated 29 patients (35 hips) who underwent THA between December 2000 and February 2002. The survival rate was estimated using the Kaplan-Meier method. Hip joint function was evaluated using the Japanese Orthopaedic Association (JOA) score. Two-dimensional polyethylene wear was estimated using Martell's Hip Analysis Suite. We calculated the wear rates between years 1 and 5, 5 and 10, 10 and 15, and 15 and final follow-up.

RESULTS

The mean follow-up period was 19.1 years (SD 0.6; 17.3 to 20.1). The 19-year overall survival rate with the end point of all-cause revision was 97.0% (95% confidence interval (CI) 91 to 100). The mean JOA score improved from 43.2 (SD 10.6; 30 to 76) before surgery to 90.2 (SD 6.4; 76 to 98) at the final follow-up (p < 0.001). There was no osteolysis or loosening of the acetabular or femoral components. The overall steady-state wear rate was 0.013 mm/year (SD 0.012). There was no hip with a steady-state wear rate of > 0.1 mm/year. There was no significant difference in wear rates for each period. We found no significant correlation between the wear rate and age, body weight, BMI, or cup inclination.

CONCLUSION

First-generation annealed HXLPE shows excellent wear resistance and no acceleration of wear for approximately 20 years, with low all-cause revision rates. Cite this article: Bone Joint J 2022;104-B(2):200-205.

Evaluation of optimal implant alignment in total hip arthroplasty based on postoperative range of motion simulation

BACKGROUND

Dislocation after total hip arthroplasty is a frequent cause of revision surgery. This study was performed to determine the optimal implant alignment in total hip arthroplasty by simulating the postoperative range of motion.

METHODS

All operations were performed via posterolateral approach using combined anteversion of the stem and cup technique. Maximum range of motion without implant impingement was simulated in 79 replaced hips using postoperative computed tomography and the achievement of the required range of motion defined by previous studies was assessed. Optimal cup and stem alignment for impingement-free range of motion were statistically determined using the receiver operator coefficient curve.

FINDINGS

Cup inclination and anteversion, stem anteversion, and combined anteversion were 37.6°, 20.1°, 26.2°, and 46.3°, respectively. Maximum range of motion in flexion, extension, internal rotation at 90° of flexion, and external rotation were 131.8°, 42.3°, 56.4°, and 64.5°, respectively. Flexion >110°, extension >30°, internal rotation >30° at 90° of flexion, and external rotation >30° were fulfilled by 96%, 86%, 92%, and 96% of all replaced hips, respectively. Optimal implant alignment for impingement-free range of motion was 34°-43° of cup inclination, 18°-26° of cup anteversion, 17°-29° of stem anteversion, and 35°-56° of combined anteversion. Both cup and stem anteversion showed significant relationship with postoperative range of motion.

INTERPRETATION

Surgeons could gain valuable insights into optimal cup and stem alignment to perform postoperative range of motion simulations.

Computer simulation based on in vivo kinematics of a replaced hip during chair-rising for elucidating target cup and stem positioning with a safety range of hip rotation

Background After total hip arthroplasty, dislocation can occur when a patient unexpectedly assumes internal/external limb positions, even during chair-rising, which is a frequently activity of daily life. Therefore, determining the target cup position to avoid impingement in unexpected limb positions using in vivo data of daily life activities is critical. Methods A computer simulation was performed on 21 total hip arthroplasty patients using patient-specific component placements and hip kinematics obtained during chair-rising analysis using image-matching techniques. The liner-to-neck distance and impingement were evaluated by simulating the change in internal/external rotation angle at maximum hip flexion/extension from 0 to 90°. The cutoff values of cup anteversion and combined anteversion at 60° of internal/external rotation were determined. Findings The anterior/posterior liner-to-neck distances were negatively correlated with internal/external rotation angles (r = -0.82 and -0.78, respectively) and decreased by 1.7 and 1.8 mm for every 15° increase, respectively. Three cases (14%) of anterior/posterior impingement were observed at 60° of internal/external rotation angle, respectively. The cutoff values for cup anteversion and combined anteversion to avoid impingement at 60° of internal/external rotation angle were 12°-25°/38°-62°, respectively. The stem anteversion, adjustable by cup anteversion to meet both the target cup anteversion and combined anteversion, was 13°-50°. Interpretation Simulated unintentional internal or external hip rotation, even during chair-rising, caused impingement and posed a dislocation risk. If the stem anteversion is excessively small or large in meeting the target combined anteversion, adjustments to stem anteversion could be recommended in addition to adjustments in cup anteversion.

Mid-term results of a new femoral prosthesis using Ti-Nb-Sn alloy with low Young's modulus

Background

This study was performed to investigate the mid-term results of Ti-Nb-Sn (TNS) alloy stem with a low Young’s modulus.

Methods

This study was a multicenter prospective cohort study. A total of 40 primary total hip arthroplasties performed between April 2016 and September 2017 was enrolled in this study. With the unique functional gradient properties by heating treatment, the strength of the proximal portion was enhanced, while the distal portion maintained a low Young’s modulus. The surgeries were performed through the posterolateral approach using the TNS alloy stems. Radiographs were taken from immediately after surgeries until 3 years, and stress shielding and subsidence of the stems were evaluated. The incidences of the stem breakage were also assessed. Clinical assessments were performed using Japanese Orthopaedic Association (JOA) and Japanese Orthopaedic Association Hip Disease Evaluation Questionnaire (JHEQ) scores.

Results

Among the 40 enrolled patients, 36 patients were female and 4 were male. At 3 years after surgery, there were no radiologic signs of loosening, subsidence, or breakage of the stem. Stress shielding was observed in 26 hips (65%). Of 26 hips, 16 hips (40%) were grade 1 and 10 hips (25%) were grade 2. There was no advanced stress shielding. The JOA and JHEQ scores significantly improved compared with the preoperative scores.

Conclusion

The current study using a new TNS alloy femoral stem showed good clinical outcomes at 3-year follow-up. Radiologically, there was no loosening or subsidence of the stem. The mild stress shielding was observed in 65% of patients.

Trial registration

Current Controlled Trials ISRCTN21241251.

The date of registration was October 26, 2021.

Retrospectively registered.

Wear analysis of the first-generation cross-linked polyethylene at minimum 10 years follow-up after THA: no significant effect of sports participation

The impact of sports on long-term wear of highly cross-linked polyethylene (XLPE) after total hip arthroplasty (THA) is not fully understood. We investigated (1) the wear performance of the first-generation XLPE, and (2) whether sports participation influences the steady wear rate of XLPE. The femoral head penetration into the cup was measured digitally on radiographs of hips undergoing THA with XLPE. We retrospectively reviewed data that included age, gender, body mass index, follow-up period, preoperative diagnosis, types of XLPE, ball diameter, head material, inclination of the cup, physical function score, and sports participation. Statistical analyses were applied to determine whether sports affect the wear of XLPE and which factors were associated with the steady wear rate. Creep and steady wear rate were found to be 0.18 mm and 0.005 mm/year, respectively. Sports participation, regardless of impact, provided no significant difference in the steady wear rate. Multiple regression analysis demonstrated that sports did not increase the steady wear rate. Our findings showed excellent wear performance of the first-generation XLPE at a minimum of ten years after THA, without significant effect of sports participation on the liner wear.

Gait instability may indicate liner failure in patients with total hip arthroplasty. A report of three cases

Total hip arthroplasty is one of the most common and successful orthopaedic procedures performed worldwide. Uncemented modular acetabular components and highly cross-linked polyethylene liners are the implants of choice for most arthroplasty surgeons. However, despite their well-known benefits, highly cross-linked polyethylene liners are not without complications, such as rim fracture, rupture and dissociation. We report three patients with gait instability and radiographic subluxation due to highly cross-linked polyethylene liner failures evidenced during stage one revision surgery. The three patients were symptoms free, with no new instability episodes, and the radiographs showed no evidence of implant loosening at the most recent follow-up. Although it is a rare complication, these three cases highlight the importance of suspecting and evaluating highly cross-linked polyethylene liner failures in patients referred for gait instability with no history of previous trauma.

Incidence of Osteolysis and Aseptic Loosening Following Metal-on-Highly Cross-Linked Polyethylene Hip Arthroplasty: A Systematic Review of Studies with Up to 15-Year Follow-up

BACKGROUND

This study compared the incidence of osteolysis, aseptic loosening, and revision following use of highly cross-linked polyethylene (HXLPE) or conventional polyethylene (CPE) at medium to long-term (>5 to 15 years) follow-up in primary total hip arthroplasty (THA). Incidences were quantified and compared with regard to age and method of implant fixation.

METHODS

Using the PRISMA (Preferred Reporting Items for Systematic reviews and Meta-Analyses) guidelines, 12 randomized controlled trials and 18 cohort studies were investigated for evidence-based outcomes following HXPLE and CPE use in 2,539 hips over a 5 to 15-year follow-up.

RESULTS

Lower rates of osteolysis, aseptic loosening, and implant revision were reported following use of HXLPE liners. Osteolysis was reduced from 25.4% with CPE to 4.05% with HXLPE in young patients, and from 29.7% to 6.6% in the older patient cohort. Similarities in osteolysis rates were observed when cemented (24.9% for CPE and 6.5% for HXLPE) and uncemented components (32.8% for CPE and 7.1% for HXLPE) were compared. No clear advantage in the type of HXLPE used was observed.

CONCLUSIONS

Over a follow-up period of up to 15 years, when compared with CPE, use of HXLPE liners reduced the incidence of osteolysis, aseptic loosening, and implant revision, regardless of the fixation method and including in younger and potentially more active patients.

LEVEL OF EVIDENCE

Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

Contemporary indications for first-time revision surgery after primary cementless total hip arthroplasty with emphasis on early failures

BACKGROUND

To clarify contemporary indications for first-time revision surgery after primary cementless total hip arthroplasty (THA) for addressing potential issues with cementless THA.

METHODS

Data for 101 consecutive hips in 94 patients who underwent primary cementless THA at our institution and subsequently underwent first-time revision surgery were retrospectively reviewed. Baseline characteristics, indications for first-time revision surgery, and time from the primary THA to first-time revision surgery were evaluated.

RESULTS

The overall mean time to first-time revision surgery was 10.3 years (range, 0-33 years). The indications for first-time revision surgery were polyethylene wear and osteolysis in 33 hips, aseptic loosening in 25 hips, infection in 17 hips, periprosthetic fracture in 13 hips, instability in 8 hips, and component failure (liner dissociation or stem fracture) in 5 hips. Thirty-seven hips (37%) had undergone first-time revision surgery within 5 years of primary THA, of which the most common indications were infection and periprosthetic fracture.

CONCLUSION

The current results suggested that reducing the number of early failures seems to be essential form improving THA outcomes.

Influencing Factors for Joint Perception After Total Hip Arthroplasty: Asian Cohort Study

BACKGROUND

Perceiving replaced joints as natural is one of the best scenario after total hip arthroplasty (THA). We investigated the distribution of and influencing factors for patient's joint perception after THA in Asian cohort, which is not well known.

METHODS

We mailed a questionnaire to Asian patients who had undergone THA in our institution between 2012 and 2016, and this study included 318 Asian patients. The questionnaire assessed patient's joint perception, Oxford Hip Score (OHS), Short Form-12 Health Survey (SF-12) physical, mental, and role component summaries, and satisfaction score. Leg length discrepancy and global femoral offset before and after THA were measured using radiographs. The patients were divided into 2 groups with patient's joint perception: natural and artificial perception groups. OHS, SF-12, satisfaction, leg length discrepancy, and global femoral offset were compared between natural and artificial perception groups, and which factors significantly influenced joint perception were determined.

RESULTS

Of the 318 patients, 165 patients (51.8%) perceived their replaced joint as a natural joint. OHS, SF-12 physical and role component summaries, and satisfaction score in natural perception group were significantly higher than those in artificial perception group, without significant difference in SF-12 mental component summary. Multivariate analysis showed that less of usual pain, easier to get in or out of a car, and osteoarthritis in the contralateral hip were positively associated with natural joint perception after THA.

CONCLUSION

This study indicated to surgeons that pain relief and improvement in getting in or out of a car after THA could lead to even better patient's joint perception.

In vivo kinematics, component alignment and hardware variables influence on the liner-to-neck clearance during chair-rising after total hip arthroplasty

BACKGROUND

There is an interest in quantifying dynamic hip kinematics before and after total hip arthroplasty (THA) during chair-rising: one of daily life activities.

METHODS

The study consisted of 21 patients who underwent unilateral total hip arthroplasty for symptomatic osteoarthritis. We obtained continuous radiographs using a flat-panel X-ray detector while the participants rose from chair. We assessed the pre and postoperative hip joint's movements using three-dimensional-to-two-dimensional model-to-image registration techniques. We also measured minimum liner-to-neck distances at maximum hip flexion and extension as anterior and posterior liner-to-neck distances, respectively. Multivariate analyses were applied to determine which factors were associated with liner-to-neck distances.

RESULTS

The cup inclination, cup anteversion, and stem anteversion averaged 37.4°, 23.1°, and 30.1°, respectively. Significantly larger maximum hip flexion angle (72°) was found during chair-rising after THA compared to that before THA (63°, P < 0.01). The anterior pelvic tilt at the maximum hip flexion after THA (3° of anterior tilt) was significantly (P < 0.05) anterior compared to that before THA (1° of posterior tilt). The anterior and posterior liner-to-neck distances averaged 12.3 mm and 8.1 mm, respectively, with a significant difference (P < 0.01). No liner-to-neck contact was found in any hips. In multivariate analysis, the hip flexion angle, cup inclination, stem anteversion and head diameter were significantly associated with the anterior liner-to-neck distance (P < 0.05), the hip extension angle, cup anteversion, neck length and with or without elevated rim were significantly associated with the posterior liner-to-neck distance (P < 0.05, 0.01, 0.05, 0.01, respectively).

CONCLUSION

This study indicates that well-positioned THA provide increased range of hip flexion with sufficient anterior liner-to-neck clearance during chair-rising. Dynamic hip kinematics, component position, and hardware variables significantly influenced on the liner-to-neck clearance under weight-bearing conditions.

Quantitative Measurements of Backside Wear in Acetabular Hip Joint Replacement: Conventional Polyethylene Versus Cross-Linked Polyethylene

As shown in previous studies, the modification of conventional polyethylene (CPE) to cross-linked polyethylene (XLPE) and the contribution of antioxidants result in a reduction in total wear. The aim of this study was to evaluate XLPE inserts with vitamin E and CPE regarding their resistance to the backside wear mechanism. A cementless hip cup system (Plasmafit^® Plus 7, Aesculap) was dynamically loaded using CPE and XLPE inserts. The backside wear was isolated, generated and collected using the two-chamber principle. The chambers were filled with ultrapure water. After 2 × 10⁶ cycles, the fluids were examined for wear particles according to a particle analysis. Using XLPE inserts, the backside wear was significantly reduced by 35%. While XLPE backside wear particles are significantly larger than CPE particles, they do not differ in their morphology. This study confirms the greater resistance to backside wear of XLPE compared to CPE. It can be assumed that the improved fatigue resistance of the vitamin E-stabilized XLPE inserts demonstrates XLPE’s effectiveness against micro-motion and the resulting changing tensions in interface areas like surface breakdown, pitting and the release of very small particles.

High survivorship of highly cross-linked polyethylene in revision Total hip Arthroplasty: a minimum 10-year follow-up study

Purpose

Highly cross-linked polyethylene has been introduced to decrease osteolysis secondary to polyethylene wear debris generation. However, few long-term data on revision total hip arthroplasty (THA) using highly cross-linked polyethylene liners are available. The objective of this study was to determine long-term outcomes of a highly cross-linked polyethylene liner in revision THA.

Materials & methods

We evaluated 63 revision THAs performed in 63 patients using a highly cross-linked polyethylene liner between April 2000 and February 2005. Of these, nine died and four were lost to follow-up. Thus, the final study cohort consisted of 50 patients (50 hips), including 26 males and 24 females with a mean age of 53 years (range, 27–75 years). Mean follow-up was 11 years (range, 10–14 years).

Results

The mean Harris hip score improved from 44 points preoperatively to 85 points at the final follow-up. No radiographic evidence of osteolysis was found in any hip. The mean rate of polyethylene liner wear was 0.029 mm/year (range, 0.003 to 0.098 mm/year). A total of 5 hips (10%) required re-revision arthroplasty, including one cup loosening, one recurrent dislocation, and three deep infections. Kaplan-Meier survivorship with an end point of re-revision for any reason was 91.1% and for aseptic cup loosening was 97.9% at 11 years.

Conclusion

At a minimum of 10 years, the highly cross-linked polyethylene liners showed excellent clinical performance and implant survivorship, and were not associated with osteolysis in our patients with revision THAs.

Titanium acetabular cementless cups combined with highly crosslinked polyethylene liner have very low rates of aseptic loosening

BACKGROUND

There is a clear tendency towards cementless acetabular components in primary total hip arthroplasty.

OBJECTIVE

The aim of this study was to assess the long-term clinical and radiological outcome of titanium cementless acetabular cups when combined with a highly crosslinked polyethylene liner.

METHODS

This study is a retrospective follow-up of 67 cups in 64 patients. Clinical outcomes were assessed using the Harris Hip Score. Radiolucent lines, osteolysis and loosening were assessed radiologically. Implant survival was determined using the Kaplan-Meier analysis.

RESULTS

The average Harris Hip Score at follow-up was 80.3 ± 14.5. Signs of osteolysis were observed in 7.1% of the radiographs. No aseptic loosening of the cup was reported. Survival of the cup with aseptic loosening as an endpoint was 100%. A comparison with 19 other studies using the same material combination demonstrated very similar results. All manufacturers with available studies have at least one report of 100% survivorship at 10-year follow-up for their titanium cup and highly crosslinked polyethylene acetabular component combination with aseptic loosening as an endpoint.

CONCLUSIONS

The data suggests that the rate of aseptic loosening of a titanium cup combined with a highly-crosslinked polyethylene liner at 10-year follow-up could be as low as 0%.

Changes in acetabular component alignment due to screw fixation in patients with hip dysplasia

INTRODUCTION

Adequate initial stability of the acetabular cup is essential for total hip arthroplasty (THA). However, changes in the alignment of the acetabular component caused by screw fixation are concerning in patients with inadequate bone stock. This study aimed to investigate the effects of screw fixation on the alignment of the acetabular component in THA patients with hip dysplasia.

METHODS

We retrospectively examined 256 hips (range 28-87 years) that underwent THA using a navigation system. Patients were divided into 2 groups based on the presence or absence of changes in the alignment of the intraoperative acetabular cup, and univariate and multivariate analyses were performed to identify factors that were predictive of changes in acetabular component alignment after screw fixation in 2 dimensions: inclination and anteversion.

RESULTS

Screw fixation led to a mean change in inclination of 1.6° (range 0-10°) and a mean change in anteversion of 1.4° (range 0-14°). The Crowe classification, the presence of bone cysts, and the use of an inferior quadrant screw were identified as factors that correlated with acetabular cup alignment changes in inclination (odds ratios, 6.01, 5.94 and 0.03, respectively). Only the Crowe classification was identified as a factor that correlated with intraoperative alignment changes in anteversion (odds ratio, 2.08).

CONCLUSIONS

Screw fixation altered the acetabular cup alignment. The inclination changes were related to the extent of the dysplasia, and the risk was reduced when the inferior quadrant screw was used. Surgeons should use caution during screw fixation in THAs performed on severely dysplastic hips.

In vivo kinematic analysis of replaced hip during stationary cycling and computer simulation of optimal cup positioning against prosthetic impingement

BACKGROUND

Dynamic hip kinematics during stationary cycling after total hip arthroplasty (THA) have been unclear. Furthermore, no computer simulation of optimal cup position based on in vivo kinematics has yet been assessed.

METHODS

This study consisted of 7 patients who underwent unilateral primary THA for symptomatic osteoarthritis. Using a flat-panel X-ray detector, continuous radiographs were obtained during stationary cycling. We analyzed the three-dimensional replaced hip kinematics from the top to the bottom position of the crank using image-matching techniques and quantified minimum liner-to-stem neck distance. Simulation analyses with in vivo kinematics were performed to examine patient-specific optimal cup placement against prosthetic impingement.

FINDINGS

During stationary cycling, pelvis showed 27.1° of posterior tilt on average without significant change. Hip flexed by 59.4° and 19.3° on average at the top and bottom positions, respectively. Minimum liner-to-neck distance was 8.8 mm on average at the bottom position. Liner-to-neck, bone-to-bone, or bone-to-component impingement was not observed at any positions in any hips. Simulation analysis of cup placement showed that larger cup anteversion, inclination, and use of elevated liner significantly decreased the minimum distance between posterior liner and stem neck. Cup anteversion of more than 30° with elevated liner could cause posterior liner-to-neck impingement at bottom position.

INTERPRETATION

Stationary cycling after THA provides no excessive hip range of motion or liner-to-neck contact. Cup placement and use of elevated liner significantly influence the minimum liner-to-neck distance, in some cases simulating posterior prosthetic impingement.

Cross-Linked Versus Conventional Polyethylene for Long-Term Clinical Outcomes After Total Hip Arthroplasty: A Systematic Review and Meta-Analysis

Background: Cross-linked polyethylene (HXLPE) liners have been used for total hip arthroplasty (THA) to address the problem of osteolysis and revision surgery associated with conventional polyethylene (CPE) liners. This systematic review and meta-analysis investigated the long-term efficacy of HXLPE in preventing revision surgery and radiological osteolysis in comparison to CPE. Materials and Methods: A comprehensive search of PubMed, Embase, and the Cochrane Library from their respective inception to September 2018 was conducted to identify potential candidate articles. Data were pooled using Stata software 14.0. The quality of randomized controlled trials (RCTs) and observational studies was assessed by two different authors using the Cochrane risk-of-bias tool and the Newcastle-Ottawa scale (NOS), respectively. Results: Eight RCTs and six observational studies were included in this review. The pooled results significantly favored HXLPE over CPE in terms of total number of revisions and radiological osteolysis, with a risk reduction of 78% (95% confidence interval [CI] 0.13-0.36; p < 0.001) and 80% (95% CI 0.13-0.29; p < 0.001), respectively. Additionally, subgroup analyses of pooled data from RCTs and observational studies both showed the efficacy of HXLPE in the prevention of revision and osteolysis. Polyethylene wear in the HXLPE group was significantly less than that in the CPE group in terms of linear wear rates and head penetration rates (both p < 0.001). No significant differences were observed with regard to functional outcomes. Conclusions: The current evidence shows that HXLPE significantly improved the clinical and radiographic outcomes, but not the functional outcomes, in comparison to CPE in long-term follow-up.

Do component position and muscle strength affect the cup-head translation during gait after total hip arthroplasty?

INTRODUCTION

This study examined whether the component position or muscle strength affects the cup-head translation under in vivo weight-bearing conditions after total hip arthroplasty (THA). We hypothesized that there was a correlation between the hip offset or abductor strength and cup-head translation during gait.

MATERIALS AND METHODS

We prospectively evaluated 31 patients undergoing unilateral cementless primary THA. The cup height, cup/stem offset, and limb length discrepancy were measured on anterior-posterior bilateral hip radiographic images. The isometric muscle strength of the lower limbs was quantified using a handheld dynamometer. Continuous radiographic images were recorded during gait, and cup-head translation was analysed using a computer-assisted method.

RESULTS

The average cup height, cup/stem offset, and limb length discrepancy were - 3.8 ± 5.1 mm, 1.2 ± 5.2 mm/- 0.7 ± 7.7 mm, and - 2.1 ± 5.2 mm, respectively. The average hip abductor/flexor and knee extensor strength were 86% ± 18%/85% ± 17% and 88% ± 17% of the contralateral healthy hip, respectively. The average cup-head translation during swing phase of gait was - 0.003 ± 0.31 mm. Multiple regression analyses found no significant independent predictors of cup-head translation (p > 0.05).

CONCLUSIONS

The component position or muscle strength did not significantly influence cup-head translation during gait after well-positioned primary THA.

How does anteroposterior cup placement affect bone coverage and range of motion in primary total hip arthroplasty for hip dysplasia?

BACKGROUND

Due to anterior bone defects, high and/or posterior placement of an acetabular cup is often required to achieve sufficient coverage in patients with hip dysplasia. We examined whether posterior cup placement affected the postoperative range of motion (ROM) in primary total hip arthroplasty (THA).

METHODS

Using computer software, bone coverage and ROM were examined in 32 patients with unilateral osteoarthritis of the hip with Crowe type II or III hip dysplasia. We determined the cup position to satisfy cup center-edge (Cup-CE) angle ≥0° and the required ROM. The cup was placed at the anatomic hip center and moved in 2-mm increments anteroposteriorly and 10-mm increments vertically.

RESULTS

At vertical anatomic hip center, less than 68.8% hips fulfilled Cup-CE ≥0° regardless of anteroposterior position. Significantly more hips at higher hip center with posterior cup placement achieved Cup-CE ≥0° than hips at vertical anatomic hip center, and 10 mm higher hip center was the most suitable for achieving bone coverage. However, posterior and superior cup placement significantly decreased the flexion and IR due to early bone impingement, whereas ER and extension were not affected. A smoothing spline curve demonstrated that more posterior cup placement than 4.8 mm and 3.6 mm did not satisfy the required ROM at 10 mm and 20 mm higher hip center, respectively.

CONCLUSIONS

Posterosuperior cup placement gained more bone coverage but decreased the range of hip flexion and internal rotation. Consequently, posterosuperior cup placement did not satisfy the required ROM.

Dynamic hip kinematics during recreational classical ballet and hula dance after total hip arthroplasty: two case reports

Background

The in vivo assessment of the three-dimensional kinematics of the hip during dance activities in patients after total hip arthroplasty has not been previously reported. We evaluated the replaced hip kinematics during recreational classical ballet and hula dance using radiographic-based image-matching techniques.

Case presentation

A 58-year-old Japanese woman (patient 1; height, 157 cm; weight, 74.5 kg) and a 73-year-old Japanese woman (patient 2; height, 153 cm; weight, 48 kg) were still doing classical ballet and hula dance, respectively, after primary total hip arthroplasty. For ballet, there were gradual three-dimensional hip movements with 48° flexion, 36° abduction, and 49° external rotation in développé and 34° flexion, 29° abduction, and 43° external rotation in plié. For hula, there were small three-dimensional hip movements with 31° flexion, 15° adduction, and 11° external rotation in kao and 17° flexion, 11° adduction, and 11° external rotation in kaholo. No liner-to-neck contact was found in any dance activities.

Conclusion

Both classical ballet and hula dance produced complex ranges of hip movements and activity-dependent kinematics. These kinematic data could be useful for recommending each patient with total hip arthroplasty to continue recreational dance activities.

Dynamic hip kinematics during squatting before and after total hip arthroplasty

Background

The difference in in vivo kinematics before and after total hip arthroplasty (THA) for the same subjects and the clearance between the liner and neck during squatting have been unclear. The purpose of the present study was to clarify (1) the changes in the in vivo kinematics between prosthetic hips and osteoarthritis hips of the same subjects and (2) the extent of the liner-to-neck clearance during squatting under weight-bearing conditions.

Methods

This study consisted of 10 patients who underwent unilateral THA for symptomatic osteoarthritis. Using a flat-panel X-ray detector, we obtained continuous radiographs during squatting. We analyzed the hip joint’s movements using three-dimensional-to-two-dimensional model-to-image registration techniques. We also quantified the minimum distance at maximum flexion and extension, and the minimum angle at maximum flexion between the liner and stem neck.

Results

The maximum hip flexion angles post-THA (80.7° [range, 69.4–98.6°]) changed significantly compared with the pre-THA values (71.7° [range, 55.2°–91.2°]). The pelvic tilt angle (posterior +, anterior−) at the maximum hip flexion post-THA (10.4° [range, − 6.7° to 26.9°]) was significantly smaller than that at pre-THA (16.6° [range, − 3° to 40.3°]). The minimum anterior and posterior liner-to-neck distances averaged 10.9 and 8.0 mm, respectively, which was a significant difference. The minimum liner-to-neck angle at maximum flexion averaged 34.7° (range, 20.7°–46.3°). No liner-to-neck contact occurred in any of the hips.

Conclusion

THA increased the range of hip joint motion and the pelvis tilted anteriorly more after than before THA, with sufficient liner-to-neck clearance during squatting. These data may be beneficial for advising patients after THA regarding postoperative activity restrictions in daily life.

Preoperative Canal Bone Ratio is Related to High-Degree Stress Shielding: A Minimum 5-Year Follow-Up Study of a Proximally Hydroxyapatite-Coated Straight Tapered Titanium Femoral Component

BACKGROUND

Few studies have reported risk factors for stress shielding. We sought to evaluate clinical and radiographic outcomes of a proximally hydroxyapatite-coated straight tapered titanium femoral component stem during a minimum 5-year follow-up and identify factors associated with high-degree stress shielding.

METHODS

A total of 156 total hip arthroplasties (n = 124; 98 women and 26 men; mean age, 56.5 years) with a minimum follow-up period of 5 years were included in the study. Clinical and radiologic measurements at follow-up (range, 5-16.3 years; mean, 10.2 years) were analyzed.

RESULTS

The mean preoperative Harris Hip Score (HHS) was 56.6, and the mean HHS at the latest follow-up was considerably improved at 86.8. Stress shielding at the latest follow-up was low degree in 136 (87%) hips and high degree in 20 (13%) hips. On average, high-degree stress shielding occurred 9.9 years (5-14 years) after surgery. The results of Cox proportional hazard analysis showed that a canal bone ratio ≥ 0.49 was an independent risk factor for high-degree stress shielding (P = .0075; hazard ratio, 3.981). HHS at the latest follow-up was significantly lower in high-degree stress shielding than in low-degree stress shielding (80.7 and 87.7, respectively; P = .0030).

CONCLUSION

Preoperative canal bone ratio ≥ 0.49 is independently associated with high-degree stress shielding. In addition, the number of cases with high-degree stress shielding significantly increased over time during a mean 10-year follow-up.

Sports Participation in Patients After Total Hip Arthroplasty vs Periacetabular Osteotomy: A Propensity Score-Matched Asian Cohort Study

BACKGROUND

No studies have compared sports participation between total hip arthroplasty (THA) and periacetabular osteotomy (PAO) in matched Asian cohorts. We investigated sports participation and activity levels in Asian THA cohort, and compared them between THA and PAO cohorts.

METHODS

Multivariate analyses were applied to determine which factors were associated with postoperative sports participation and University of California-Los Angeles (UCLA) activity score in (1) 524 THA patients and (2) 487 acetabular dysplasia patients (295 THA patients and 192 PAO patients). In addition, postoperative sports participation and UCLA score were compared between 62 THA and 62 PAO patients after adjusting for baseline characteristics with propensity score matching.

RESULTS

Sports participation and UCLA score significantly increased after THA (P < .001 in both analyses). Preoperative sports participation was the factor most associated with both postoperative sports participation and UCLA score in both 524 THA patients and 487 acetabular dysplasia patients (P < .001 in all analyses). Multivariate analysis in 487 acetabular dysplasia patients demonstrated that THA, compared with PAO, was negatively associated with postoperative sports participation (P < .001), but not postoperative UCLA score (P = .22). THA patients showed significantly lower rate of postoperative sports participation (32.3% and 51.6%, respectively, P = .046), but not postoperative UCLA score (5.0 ± 1.6 and 5.2 ± 1.9, respectively, P = .47) compared with matched PAO patients.

CONCLUSION

THA significantly increased both sports participation and activity levels. Both multivariate and propensity score-matched analyses showed that postoperative activity levels were comparable between THA and PAO cohorts.

Bearing Surfaces for Total Hip Arthroplasty

Metal-on-highly cross-linked polyethylene is considered the preferred bearing surface for conventional total hip arthroplasty because of its safety profile and excellent results in the first 10 to 15 years of use. However, with younger patient age, activity expectations increase, and the life expectancy of patients with total hip arthroplasty also has increased, so interest remains in other bearing couples. These other options include the use of various ceramic composites for the femoral head on highly cross-linked polyethylene, the so-called second-generation antioxidant polyethylenes, and ceramic acetabular liners. Several of these bearing couples have shown excellent wear rates in vitro, and short-term clinical studies have demonstrated favorable wear and safety results. It is uncertain whether any of these bearing couples should be adopted at present. Understanding the unique properties and possible complications of these bearing couples is critical for appropriate implant selection.

Wear of XLPE liner against zirconium heads in cementless total hip arthroplasty for patients under 40 years of age

INTRODUCTION

Total hip arthroplasty (THA) in the young is challenging. The purpose of this study was to retrospectively determine the clinical, radiographic, and polyethylene wear rate of relatively young patients.

METHODS

We evaluated the outcome of consecutive patients receiving primary THA who were under 40 years of age with a minimum 10-year follow-up. Indications for THA in these patients were osteoarthritis due to developmental dysplasia of the hip joint (9 hips), osteonecrosis of the femoral head (7 hips), juvenile idiopathic arthritis (2 hips), and osteoarthritis due to Perthes disease (1 hip). All THA were performed with a cross-linked ultra-high-molecular-weight polyethylene (XLPE) liner against zirconium heads with cementless implants.

RESULTS

The average Japanese Orthopaedic Association hip score significantly improved from 42 to 93 points at the latest follow-up. The mean steady wear was 0.015 mm/year (maximum 0.033 mm/year), and the mean creep wear was 0.111 mm (maximum 0.4 mm). Osteolysis was observed around 1 acetabular component and 2 stems. 1 femoral component had subsidence over 5 mm. All of the femoral components achieved fixation with an optimal interface with spot welds at the latest follow-up. Stress shielding was observed in all hips.

CONCLUSIONS

THA using an XLPE liner against zirconium heads appeared to have improved THA longevity. However, the imaging findings in some cases were suggestive of wear debris. A rigorous continual follow-up is required for relatively young patients undergoing THA.

Preoperative Planning and Operative Techniques of the Shorter Tapered Stem Compared to the Metaphyseal Fit Stem in Cementless Total Hip Arthroplasty

BACKGROUND

In order to prevent postoperative dislocation due to prosthetic impingement as a result of total hip arthroplasty (THA), the combined anteversion (CA) theory, which combines the anteversion of the femoral stem and the acetabular socket, has been revised in recent years. Particularly, it is necessary to keep CA within the target zone.

METHODS

The aim of this study was to investigate whether postoperative CA can be kept within the target zone while using the operative technique which prepares the socket first in cementless THA, by estimating the anteversion of the metaphyseal fit stem or the shorter, tapered wedge stem using preoperative 3-dimensional computerized planning, and by adjusting the anteversion of the socket using a navigation system that considers CA. One hundred fourteen patients (118 hips) were recruited for the study.

RESULTS

Postoperative CA in THA using the metaphyseal fit stem was kept within the target zone for 56 of the 60 hips (93.3%). Using the shorter, tapered wedge stem, 49 of the 58 hips (84.4%) were within the target zone. No postoperative dislocations were observed in any hips.

CONCLUSION

We found that the metaphyseal fit stem worked better than the shorter, tapered wedge stem in terms of meeting the planned CA. The shorter, tapered wedge stems were flexible in rotation according to the anatomical configuration of the proximal femur. Therefore, the stem could be placed second with the metaphyseal fit stem, but we recommend placing the stem first with the shorter, tapered wedge stem.

The diagnostic performance of radiographic criteria to detect aseptic acetabular component loosening after revision total hip arthroplasty

Aims

This study aimed to determine the diagnostic performance of radiographic criteria to detect aseptic acetabular loosening after revision total hip arthroplasty (THA). Secondary aims were to determine the predictive values of different thresholds of migration and to determine the predictive values of radiolucency criteria.

Patients and Methods

Acetabular component migration to re-revision was measured retrospectively using Ein-Bild-Rontgen-Analyse (EBRA-Cup) and manual measurements (Sutherland method) in two groups: Group A, 52 components (48 patients) found not loose at re-revision and Group B, 42 components (36 patients) found loose at re-revision between 1980 and 2015. The presence and extent of radiolucent lines was also assessed.

Results

Using EBRA, both proximal translation and sagittal rotation were excellent diagnostic tests for detecting aseptic loosening. The area under the receiver operating characteristic (ROC) curves was 0.94 and 0.93, respectively. The thresholds of 2.5 mm proximal translation or 2° sagittal rotation (EBRA) in combination with radiolucency criteria had a sensitivity of 93% and specificity of 88% to detect aseptic loosening. The sensitivity, specificity, positive predictive value and negative predictive value (NPV) of radiolucency criteria were 41%, 100%, 100% and 68% respectively. Manual measurements of both proximal translation and sagittal rotation were very good diagnostic tests. The area under the ROC curve was 0.86 and 0.92 respectively. However, manual measurements had a decreased specificity compared with EBRA. Radiolucency criteria had a poor sensitivity and NPV of 41% and 68% respectively.

Conclusion

This study shows that EBRA and manual migration measurements can be used as accurate diagnostic tools to detect aseptic loosening of cementless acetabular components used at revision THA. Radiolucency criteria should not be used in isolation to exclude loosening of cementless acetabular components used at revision THA given their poor sensitivity and NPV. Cite this article: Bone Joint J 2017;99-B:458–64.

Minimum Lateral Bone Coverage Required for Securing Fixation of Cementless Acetabular Components in Hip Dysplasia

Objectives. To determine the minimum lateral bone coverage required for securing stable fixation of the porous-coated acetabular components (cups) in hip dysplasia. Methods. In total, 215 primary total hip arthroplasties in 199 patients were reviewed. The average follow-up period was 49 months (range: 24–77 months). The lateral bone coverage of the cups was assessed by determining the cup center-edge (cup-CE) angle and the bone coverage index (BCI) from anteroposterior pelvic radiographs. Further, cup fixation was determined using the modified DeLee and Charnley classification system. Results. All cups were judged to show stable fixation by bone ingrowth. The cup-CE angle was less than 0° in 7 hips (3.3%) and the minimum cup-CE angle was −9.2° (BCI: 48.8%). Thin radiolucent lines were observed in 5 hips (2.3%), which were not associated with decreased lateral bone coverage. Loosening, osteolysis, dislocation, or revision was not observed in any of the cases during the follow-up period. Conclusion. A cup-CE angle greater than −10° (BCI > 50%) was acceptable for stable bony fixation of the cup. Considering possible errors in manual implantation, we recommend that the cup position be planned such that the cup-CE angle is greater than 0° (BCI > 60%).

Highly Cross-linked Polyethylene Liner Dissociation from a Cement-less Modular Acetabular Shell: Two Case Reports

Liner dissociation of polyethylene from a cementless acetabular socket following total hip arthroplasty (THA) is a rare complication. Cross-linked polyethylene liner dissociation from AMS-HA shell (KYOCERA Med, Osaka, Japan) occurred in 2 out of the 4153 (0.04%) cases approximately 10 years after undergoing surgery at our institute. First case was an 80-year-old female who underwent right THA along with subtrochanteric femoral shortening osteotomy due to complete dislocation hip, and second case was a 72-year-old male, who underwent right THA due to coxarthrosis. A 26 mm femoral head and CPE liner were used in both cases and the inclination degree of the acetabular socket was within 50°.There was no implant loosening in both cases. There was partial damage in the elevated rim on the alternative side and scratches on the back side in the both extracted CPE liner. It was surmised that liner dissociation was caused due to a problem in the liner fixing format of the push in type of the present model.

Minimum 10-year results of cementless total hip arthroplasty in patients with rheumatoid arthritis

OBJECTIVES

To retrospectively evaluate the long-term results of cementless total hip arthroplasty (THA) in patients with rheumatoid arthritis (RA) and postoperative patient mortality after THA.

METHODS

This study included 191 hips in 149 RA patients who underwent cementless THA between 1998 and 2005. Mean age at surgery was 54.2 years, and mean follow-up was 12.6 years. Implant and patient survivorships were determined using the Kaplan-Meier method, and the associated influencing factors were determined.

RESULTS

Implant survivals at 17 years were 99.5% for stems, 93.9% for cups, and 90.8% for liners. Among the liners used, THAs with highly cross-linked polyethylene showed better survivals compared with those with conventional polyethylene and alumina-bearing surface (93.4%, 90.9%, and 52.2%, respectively). A total of 64 deaths occurred; 45 patients died within 10 years and 19 patients died between 10 and 17 years. Malignancy (25.0%) was the leading cause of death, followed by pneumonia (20.8%) and sepsis (20.8%). The patient survival rate was 36.9% at 17 years after THA. Multivariate analysis exhibited that older age at operation and greater dose of concomitant corticosteroid resulted in shorter patient survivals.

CONCLUSIONS

Cementless THA worked well in patients with RA. Mortality remained high among RA patients who needed THA.

What is the lifetime risk of revision for patients undergoing total hip arthroplasty?

Aims

The purpose of this study was to determine the lifetime risk of revision surgery for patients undergoing Charnley cemented total hip arthroplasty (THA), with 40-year follow up, using death as a competing risk.

Materials and Methods

We retrospectively reviewed 2000 cemented Charnley THAs, with 51 living hips available at 40 years.

Results

The cumulative risk of revision or removal for any reason was 13% (95% confidence interval (CI) 12 to 15). Patients aged under 50 years at the time of surgery had a 35% (95% CI 28 to 42) risk of revision or removal for any reason (Hazard Ratio (HR) 3.6; 95% CI 2.5 to 5.2; p <  0.001), patients 50 to 59 years old had a 20% risk (95% CI 16 to 24) (HR 2.1; 95% CI 1.5 to 2.8; p < 0.0001), patients aged 60 to 69 years had a 9% risk (95% CI 7 to 11) (reference point), and patients ≥ 70 years old had a 5% risk (95% CI 4 to 7) (HR 0.96; 95% CI 0.6 to 1.5; p = 0.86) during their lifetime. Men had a higher risk of revision or removal for any reason (HR 2.1; 95% CI 1.7 to 2.7; p < 0.001).

Conclusion

With almost all the patients in this series followed up till either death or revision, we have been able to develop a ‘rule of thumb’ for lifetime likelihood of revision or implant removal for the Charnley THA: one in three for patients < 50 years, one in five for patients 50 to 59 years, one in ten for patients 60 to 69 years, and one in 20 for patients ≥ 70 years. The results provide a benchmark for comparison of outcomes, for the newer designs of THA. Cite this article: Bone Joint J 2016;98-B:1436–40.

Does High Hip Center Decrease Range of Motion in Total Hip Arthroplasty? A Computer Simulation Study

BACKGROUND

High placement of a cementless acetabular cup is often required to have sufficient bone coverage in hip dysplasia. We examined whether a high hip center decreases the postoperative range of motion (ROM) in total hip arthroplasty.

METHODS

Using a computer software, ROM and bone coverage were examined in 32 patients with unilateral osteoarthritis of the hip with Crowe type II or III hip dysplasia. The cup was placed at the anatomic hip center and moved vertically in 5-mm increments. Vertical center of rotation (V-COR) was defined as the distance from the head center to the interteardrop line. The required ROM was defined as flexion  ≥110°, internal rotation (IR) at 90° flexion ≥30°, extension ≥30°, and external rotation ≥30°. We determined the V-COR to satisfy the required ROM and cup center-edge angle (Cup-CE) ≥0°.

RESULTS

Only 40.6% of the patients satisfied Cup-CE ≥0° at the anatomic hip center. Bone coverage increased with the peak at 30, 35 mm of V-COR (90.6% satisfied Cup-CE ≥0°) and decreased at ≥40 mm. Higher V-COR resulted in lower range of flexion and IR, but increased the range of extension and external rotation. The cutoff value from the receiver-operating characteristic curve for both flexion and IR was a V-COR of 35 mm.

CONCLUSION

The higher hip center gained more bone coverage but decreased the range of hip flexion and IR. Acceptable V-COR in hip dysplasia was around 35 mm, about 20 mm above the true hip center, in terms of ROM.

Dynamic Hip Kinematics During the Golf Swing After Total Hip Arthroplasty

BACKGROUND

Although most surgeons allow their patients to play golf after total hip arthroplasty (THA), the effect on the implant during the golf swing is still unclear.

PURPOSE

To evaluate hip kinematics during the golf swing after THA.

STUDY DESIGN

Descriptive laboratory study.

METHODS

Eleven hips in 9 patients who underwent primary THA were analyzed. All patients were right-handed recreational golfers, and these 11 hips included 6 right hips and 5 left hips. Periodic radiographic images of the golf swing were taken using a flat-panel x-ray detector. Movements of the hip joint and components were assessed using 3-dimensional-to-2-dimensional model-to-image registration techniques. Liner-to-neck contact and translation of the femoral head with respect to the acetabular cup (cup-head translation) were examined. Hip kinematics, orientation of components, and maximum cup-head translation were compared between patients with and without liner-to-neck contact.

RESULTS

On average, the golf swing produced approximately 50° of axial rotation in both lead and trail hips. Liner-to-neck contact was observed in 4 hips with elevated rim liners (2 lead hips and 2 trail hips) at maximum external rotation. Neither bone-to-bone nor bone-to-implant contact was observed at any phases of the golf swing in any of the hips. Four hips with liner-to-neck contact had significantly larger maximum external rotation (37.9° ± 7.0° vs 20.6° ± 9.9°, respectively; P = .01) and more cup anteversion (26.5° ± 6.1° vs 10.8° ± 8.9°, respectively; P = .01) than hips without liner-to-neck contact. No significant differences between hips with and without contact were found for cup inclination (42.0° ± 2.5° vs 38.1° ± 5.5°, respectively; P = .22), combined anteversion (45.3° ± 8.9° vs 51.4° ± 7.9°, respectively; P = .26), or maximum cup-head translation (1.3 ± 0.3 mm vs 1.5 ± 0.4 mm, respectively; P = .61).

CONCLUSION

In this analysis, the golf swing did not produce excessive hip rotation or cup-head translation in any hips. However, liner-to-neck contact during the golf swing was observed in 36% of the hips, with unknown effects on the long-term results.

CLINICAL RELEVANCE

Golf is an admissible sport after THA because dynamic hip stability was observed. However, the implant position, especially cup anteversion and the use of elevated rim liners, promoted liner-to-neck contact.

The Absence of Hydroxyapatite Coating on Cementless Acetabular Components Does Not Affect Long-Term Survivorship in Total Hip Arthroplasty

BACKGROUND

Hydroxyapatite (HA) has been applied to joint prostheses as a bioactive coating to prolong their durability. However, HA benefits for cup survival in total hip arthroplasty (THA) remain controversial. In this study, we compared the survival of cups with and without HA coating during a minimum follow-up of 18 years.

METHODS

In total, 183 THA cases in 163 patients were analyzed, including 73 cups with HA coating (HA(+) group) and 110 without HA coating (HA(-) group); otherwise, the cups had identical titanium-sprayed rough surfaces and were fixed with screws. In both groups, the same conventional polyethylene liners were applied. Zirconia and alumina ceramic heads were used in the HA(+) and HA(-) groups, respectively. We retrospectively analyzed cup survival based on cup revision for any reason or aseptic loosening as end points.

RESULTS

In total, 7 and 8 revisions were performed in the HA(-) and HA(+) groups with survival rates of 86.3% and 90.1%, respectively. Among them, 3 cups in the HA(-) group and 1 cup in the HA(+) group were revised for aseptic loosening in 20 years (survival rates 94.1% and 98.7%, respectively). No significant difference was detected in cup survival rates between the groups based on both end points. There were no stem revisions during the observation period.

CONCLUSION

The results suggested that HA coating did not have either beneficial or adverse effects on the long-term cup survival in primary cementless THA.

Is a Stem Version on the Crosstable Lateral Radiograph Accurate in Total Hip Arthroplasty?

BACKGROUND

In contrast to the acetabular cup version (CV), stem version (SV) measurement on the crosstable lateral radiograph has not been validated. We, therefore, investigated: (1) the difference of SV on the crosstable lateral radiograph from that measured using computed tomography data and (2) the reliability of SV measurement on the crosstable lateral radiograph.

METHODS

We examined the correlations of the crosstable-CV and crosstable-SV with true-CV (operative cup anteversion) and true-SV (neck version relative to the posterior condylar line) obtained using computed tomography data from 103 patients. We also produced the digital reconstructed crosstable lateral radiograph with adjusted hip flexion and rotation and defined SV on this image as the true-crosstable SV.

RESULTS

Significant positive correlations were noted between the crosstable-CV and true-CV, with a correlation coefficient of 0.79. In contrast, the correlation between the crosstable-SV and true-SV was very low (r = 0.30), with significantly higher deviation from the true-SV values when compared with the crosstable-CV (standard deviation, 11.6° vs 6.5°, P  < .001). The true-crosstable SV was correlated with true-SV (r = 0.81); however, the average difference was 23.5° ± 8.9°.

CONCLUSION

Crosstable-SV differed from true-SV in the measurement plane and did not correlate well with the true-SV, suggesting the unreliability of its measurements. Therefore, the crosstable-SV is not recommended for clinical use.

Total Hip Arthroplasty for the Paralytic and Non-paralytic Side in Patient with Residual Poliomyelitis

BACKGROUND

Total hip arthroplasty (THA) for poliomyelitis is a problematic procedure due to difficulty in positioning the cup of the prosthesis in the true acetabulum and the risk of dislocation after THA due to the low muscle tone.

METHODS

We herein present a case of bilateral hip pain with a history of poliomyelitis. Radiograph showed bilateral hip osteoarthritis caused by hip dysplasia due to residual poliomyelitis in right hip joint or developing dysplasia of the hip joint in left hip joint. THA was performed to bilateral hip joints.

RESULTS

Six years after bilateral THA, bilateral hip pain significantly improved. Additionally, the muscle strength on the paralyzed right side partially improved. However, the muscle strength on the non-paralyzed left side did not significantly improve. No complications related to the surgery were observed.

CONCLUSION

Promising early results were obtained for THA in our patient with residual poliomyelitis. However, surgeons should pay attention to the potential development of complications concerning THA that may arise due to the residual poliomyelitis.

Re-dislocation after revision total hip arthroplasty for recurrent dislocation: a multicentre study

PURPOSE

Although most case of dislocations after total hip arthroplasty (THA) can be managed with conservative treatment, recurrent dislocation may require surgical intervention. This multicentre study was conducted to evaluate the re-dislocation rate after revision THA for recurrent dislocation, and to determine the risk factors for re-dislocation.

METHODS

We retrospectively reviewed the 88 hips in 88 patients who underwent revision THA for recurrent dislocation at five institutions between 1995 and 2014. The mean patient age at surgery was 68.5 years and the mean follow-up period was 53.1 months. Multivariate logistic regression was performed to identify risk factors for re-dislocation.

RESULTS

Sixteen hips in 16 patients (18.2 %) re-dislocated at a mean of 25.5 months (range, 1-83 months) after revision THA. Multivariate analysis identified osteonecrosis of the femoral head (odds ratio [OR] = 5.62 vs. osteoarthritis) and a femoral head size < 32 mm (OR = 3.86) as independent risk factors for re-dislocation. Eight hips required additional revision THA for re-dislocation.

CONCLUSION

The re-dislocation rate after revision THA for recurrent dislocation remains high, suggesting the need for prevention measures. We recommend the use of a femoral head size ≥ 32 mm.