Comparison of two observational methods, scanning electron and confocal laser scanning microscopies, in the adhesive interface analysis of endodontic sealers to root dentine

The use of sonic and ultrasonic activation of endodontic sealer to improve sealer filling quality in the root canal: a scoping review

This scoping review aimed to map whether the use of sonic and ultrasonic methods to activate the endodontic sealer improves the sealer filling quality in the root canal, considering the bond strength and intratubular penetration to the root dentin as evaluation criteria. The study protocol was prospectively registered and is available online ( https://osf.io/x5fma/ ). Reporting was based on PRISMA Extension for Scoping Reviews. The search was performed in Embase, PubMed, Scopus, and Web of Science. We selected studies without time and language restrictions that used sonic or ultrasonic methods to activate endodontic sealer, whose outcomes were bond strength and intratubular penetration. Three researchers independently selected the articles and collected data. Of 1422 articles, 19 were read in full and 13 studies were included. The vast majority of studies opted for direct activation of the endodontic sealer. The most investigated sealers were the epoxy resin-based sealers, and the ultrasonic activation method was the most explored. For the bond strength outcome, there was a trend toward higher values when the sealer was activated ultrasonically, but the findings seem to be divergent. The sonic activation was not effective for its intended purpose. For the outcome of intratubular penetration, the vast majority of studies indicate that the use of sonic and ultrasonic methods to activate the endodontic sealer is capable of increasing intratubular penetration. The use of sonic and ultrasonic methods to directly activate the endodontic sealer can increase the intratubular penetration of the sealer, but their benefits on the bond strength are uncertain.

Ultrasonic activation of the endodontic sealer enhances its intratubular penetration and bond strength to irradiated root dentin

To evaluate the effect of ultrasonic activation of the endodontic sealer on its intratubular penetration and bond strength to irradiated root dentin. Forty human teeth were distributed into 4 groups (n = 10), according to the radiation therapy (RT) exposure-70 Gy-and ultrasonic activation (UA) of the endodontic sealer: RT/UA-irradiated teeth and sealer UA; RT/no-UA-irradiated teeth and no sealer UA; no-RT/UA-non-irradiated teeth and sealer UA and no-RT/no-UA-non-irradiated teeth and no sealer UA. Push-out bond strength test was performed in a Universal Testing Machine. Failure modes and adhesive interface were analyzed under Scanning Electron Microscopy. The data were statistically compared (two-way-ANOVA and posthoc Games-Howell test; Fisher's exact test - α = 5%). The different experimental conditions (radiation and UA) and the root third had a significant effect on push-out bond strength, and the interaction of these factors was significant (p < 0.05). UA of the sealer significantly increased its bond strength to both irradiated and non-irradiated dentin (p < 0.05). The irradiated groups mostly presented adhesive-type failure of the sealer (p < 0.01). Regardless of the irradiation, the ultrasonically activated groups showed a more homogeneous adhesive interface, with the presence of sealer tags in greater density and depth. Ultrasonic activation enhanced the intratubular penetration and the bond strength of the endodontic sealer to irradiated dentin. The impact of ultrasonic activation of the endodontic sealer on teeth undergoing radiotherapy is a gap in the scientific literature that needs to be bridged.

Dual- or single rinse? The tubular sealer penetration of endodontic chelating agents

INTRODUCTION

In this study, we aimed to compare the effectiveness of various chelating agents, ethilenediaminetetraacetic acid (EDTA), citric acid (CA), and etidronic acid (HEDP) mixed in two different forms, in removing the smear layer and promoting the penetration of an endodontic sealer into the dentinal tubules of extracted single-rooted teeth.

METHODS

The study used 75 teeth divided into five groups: 17% EDTA, 10% CA, 9% HEDP + NaOCl, 9% HEDP + distilled water (DW), and a control (DW) group. Scanning electron microscopy was used to assess smear layer removal and confocal laser microscopy was used to evaluate tubular sealer penetration at different depths from the apical tip.

RESULTS

Sealer penetration was highest with 17% EDTA and 10% CA as compared with the other agents (p<0.001). At the cervical third, the sealer penetration for EDTA, HEDP + NaOCl, and HEDP + DW groups were significantly different than those in DW (p = 0.020). For the middle third, EDTA, CA, and HEDP + NaOCl groups were significantly higher than those of the DW group (p<0.001). Cervical-level values were significantly higher than apical-level values for HEDP + NaOCl, HEDP + DW, and DW (p<0.001). Smear layer removal was lower with 9% HEDP + DW than with 17% EDTA and 10% CA at all depths (p<0.001). A significancy in smear layer removal was observed between 10% CA and control (p = 0.015) in middle depth.

CONCLUSION

Within the limitations of this study, highest values were seen in EDTA and CA in terms of sealer penetration and smear layer removal. In the light of these findings, the use of strong chelating agents highlights better clinical efficiency than dual-rinse or single HEDP irrigation.

Assessment of different irrigation techniques on the penetration depth of different sealers into dentinal tubules by confocal laser scanning microscope: An in vitro comparative study

Background

The effective disinfection of the entire root canal system aids in the penetration of irrigants into the dentinal tubules further improving sealer penetration and achieving a three-dimensional seal in endodontically treated teeth. Various final irrigation techniques can be employed to achieve this goal. Therefore, this study intended to assess and compare the efficacy of three final irrigation techniques on the depth of penetration of two root canal sealers into dentinal tubules using confocal laser scanning microscope (CLSM).

Methods

Forty-eight single-rooted mandibular premolars were selected and decoronated to a length of 12 mm. All the samples were prepared using ProTaper Gold rotary files and divided into three groups: Group 1 - Conventional syringe irrigation (CSI), Group 2 - passive ultrasonic irrigation (PUI), and Group 3 - Pro-agitator tip system (PATS). Each group was divided into two subgroups: Subgroup A - AH Plus and Subgroup B - GuttaFlow Bioseal (GFB). Then, sealers were mixed with 0.1% rhodamine B dye and the samples were obturated. All the samples were sectioned at 2 mm and 5 mm from the apex and visualized under confocal laser scanning microscope (CLSM) (10×) for maximum mean penetration depth and percentage of sealer penetration. Statistical analysis was done using the independent t-test and one-way analysis of variance test, followed by Tukey's Post hoc analysis.

Results

PUI performed better in the apical third, whereas PUI and PATS showed comparable results in the middle third for both depth and percentage of sealer penetration. Among the two sealers, GFB performed better than AH Plus in both the apical and middle third. These values were statistically significant. (P < 0.05).

Conclusion

Final irrigation activation with PUI or PATS can significantly improve sealer penetration. The average depth of penetration of GFB both at the middle and apical third of the root was significantly superior to AH Plus.

Dentinal tubule penetration following ultrasonic, sonic, and single-cone technique of a biosealer: An ex vivo study

Background

The endodontic space is complex, and using a single-cone obturation technique fails to ensure a complete filling.

Introduction

This study aimed to investigate the effect of ultrasonic activation, sonic activation, and single-cone technique of a biosealer on its dentinal tubular penetration.

Materials and Methods

In the experiment, single-root mandibular premolars were randomly assigned to three groups (n = 20): group A, ultrasonic activation; Group B, sonic activation; and Group C, single-cone technique. Penetration of the fluorescently labeled biosealer was investigated using a confocal laser scanning microscope.

Results

The data were statistically analyzed using Kruskal-Wallis and Mann-Whitney tests (P = 0.05). The highest penetration of biosealer was observed in Group A, followed by Group B (P < 0.05).

Conclusions

Dentinal tubule penetration of biosealer was significantly improved by ultrasonic and sonic activation techniques.

Analysis of the depth of penetration of an epoxy resin-based sealer following a final rinse of irrigants and use of activation systems: An in vitro study

Objective

The objective of the study was to compare and evaluate the depth of penetration of an epoxy resin-based sealer following a final rinse of 17% ethylenediaminetetraacetic acid (EDTA) and 18% 1-hydroxyethylidene 1, 1-diphosphonate (HEDP), with diode laser and passive ultrasonic activation (PUI): an in vitro confocal laser scanning microscopy study.

Materials and Methods

Fifty-two extracted human mandibular premolar teeth with single root and single canal were selected. They were disinfected in 0.1% thymol solution, cleaned of calculus and soft tissues, and stored in 0.1% thymol solution till use. All teeth were radiographed and selected as per the inclusion and exclusion criteria. The teeth were decoronated using a diamond disk under copious water spray to acquire a standardized root length of 14 mm. Working length was established by inserting a size 10-K file into each root canal until it is visible at the apical foramen and by subtracting 1 mm from the recorded length. Instrumentation of the root canal was done till master apical file size of F3 using ProTaper universal, rotary instruments. The canals were irrigated with 2 mL of 3% sodium hypochlorite between successive files. Teeth were randomly divided into four subgroups n = 12 according to the intervention. Passive ultrasonic irrigation and diode laser were used to activate the irrigants. Final irrigation was performed with distilled water. These specimens were examined using confocal laser scanning microscope (OLYMPUS FLUOVIEW FV 3000) for dentinal tubule penetration of the sealer. Two-way ANOVA test and Tukey's multiple post hoc test were used for statistical analysis.

Results

Highly significant difference was seen between the groups with EDTA and HEDP, with HEDP demonstrating the highest penetration. Among the activation techniques used in this study, PUI showed the highest penetration of the sealer. The least penetration was seen with diode laser activation and EDTA.

Conclusions

The irrigation activation techniques significantly influence the penetration of sealer into root dentinal tubules. When penetration of sealer with different irrigation techniques and irrigants was evaluated, significant greater level of sealer penetration was attained with PUI activation of HEDP.

Evaluation of interfacial adaptation and penetration of bioceramic-based sealers in oval root canals: A confocal laser scanning microscope study

To assess the interfacial adaptation and penetration depth of three different bioceramic-based sealers (CeraSeal, EndoSeal MTA, Nishika Canal Sealer BG) compared to an epoxy resin-based sealer (AH Plus) in oval root canals. Fourty extracted single-rooted mandibular premolar with oval canal were prepared and randomly allocated according to the obturation into; CeraSeal, EndoSeal MTA, Nishika Canal Sealer BG and AH Plus. The roots were sectioned at 3, 6 and 9 mm from the apex. The sealer adaptation and the penetration depth were evaluated under confocal laser scanning microscope. One-way ANOVA and Repeated measure ANOVA were used to statistically analyze the data. Nishika Canal Sealer BG showed significantly higher sealer adaptation than EndoSeal MTA (P < .001) at apical and middle thirds. Meanwhile, AH Plus showed significantly higher sealer adaptation than EndoSeal MTA (P = 0.011) at middle third. For sealer penetration, Nishika Canal Sealer BG showed the longest sealer penetration that was significant compared to AH Plus (P < .001) and EndoSeal MTA (P < .001) whereas CeraSeal was significantly higher than EndoSeal MTA (P = 0.029) at coronal third. For AH Plus, there was a significant less sealer penetration at coronal third compared to apical and middle thirds (P < .05). Whereas for EndoSeal MTA, the coronal third has significant less penetration compared to the middle third (P = 0.032). Endoseal has the lowest adaptation and penetration depth. Nishika Canal Sealer BG has better adaptation and penetration depth using single cone obturation technique in oval canal. RESEARCH HIGHLIGHTS: All the tested root canal sealers have some percentage of gaps and vary in their penetration capability into dentinal tubules. Nishika Canal Sealer BG has significantly better sealer adaptation to root dentinal walls than that of EndoSeal MTA at the apical and middle third but not significantly different from other type of sealers used. Nishika Canal Sealer BG has significantly better penetration depth than AH Plus and EndoSeal MTA at the coronal third of radicular dentin.

Dentinal Tubule Penetrability and Bond Strength of Two Novel Calcium Silicate-Based Root Canal Sealers

BACKGROUND

Once the chemo-mechanical preparation of root canals is finished, achieving a complete seal of the root canal system becomes crucial in determining the long-term success of endodontic treatment. The important goals of root canal obturation are to minimize leakage and achieve an adequate seal. Thus, a material that possesses satisfactory mechanical characteristics, is biocompatible, and has the ability to penetrate the dentine tubules adequately is needed.

AIM

This study aimed to compare the penetrability and bond strength between two calcium silicate-based sealers and an epoxy resin-based sealer, as well as examine the relationship between penetrability and bond strength for the different sealers.

METHOD AND MATERIALS

Thirty-nine recently extracted single-rooted human premolar teeth were instrumented and divided evenly into three groups (n = 13), according to the sealer used for obturation: AH Plus Jet, EndoSequence, and AH Plus Bioceramic Sealer. Three teeth (30 slices) were randomly selected out of each for analysis using confocal laser scanning microscopy to assess penetrability. The remaining ten teeth (90 slices) in each group were subject to push-out tests using a universal testing machine. All teeth were sectioned into nine transverse slices of 0.9 mm thickness for their respective tests (apical, middle, coronal).

RESULTS

AH Plus Jet exhibited significantly lower penetrability and significantly higher bond strength compared to EndoSequence BC sealer (p = 0.002) and AH Plus Bioceramic Sealer (p = 0.006). There was no significant difference between EndoSequence BC sealer and AH Plus Bioceramic Sealer in terms of either penetrability or bond strength. No correlation was found between penetrability and bond strength.

CONCLUSIONS

Within the limitation of this study and regardless of the location in the canal, the bioceramic based root canal sealers appeared to perform better than the epoxy resin-based sealer in terms of dentinal penetration rate. Further studies are required to compare other biomechanical properties of bioceramic sealers including setting characteristics and bacterial leakage.

Analysis of physicochemical properties of endodontic sealers containing rhodamine B

The use of fluorescent dyes in microscopy studies is frequent. Therefore, it is important to investigate whether these compounds may alter the physicochemical properties of materials in which they are incorporated to avoid methodological biases. This study evaluated the physicochemical properties of two endodontic sealers containing dry or diluted rhodamine B. Six groups were evaluated: AH Plus and MTA Fillapex in their original composition and mixed with 0.1% dry or diluted rhodamine. Push-out test was applied to assess the bond strength to root dentin. ANSI-ADA No. 57 and ISO No. 6876:2012 specifications were followed to evaluate flowability, setting time, and solubility of the sealers. pH changes were assessed after 24 h, 7, and 30 days. Intergroup comparisons were analyzed by ANOVA complemented by Tukey's post-hoc test; comparisons among periods were analyzed by Wilcoxon and Friedman tests. The incorporation of dry rhodamine decreased the bond strength and prolonged the setting time of AH Plus. The incorporation of diluted rhodamine decreased the setting time and increased the flowability of MTA Fillapex. Diluted rhodamine promoted pH reduction of AH Plus after 24 h and dry rhodamine after 7 days. Rhodamine incorporation promoted pH reduction after 30 days for MTA Fillapex. Solubility was not affected. In conclusion, the incorporation of diluted rhodamine changed the properties of MTA Fillapex, and the incorporation of dry rhodamine changed the properties of AH Plus. Previous dilution of rhodamine did not severely compromise the physicochemical properties of AH Plus and may be suggested to assess its penetrability.

Calcium Silicate-Based Sealer Dentinal Tubule Penetration-A Systematic Review of In Vitro Studies

The aim of this systematic review was to perform a qualitative synthesis of in vitro studies which evaluate and compare the penetration of calcium silicate-based sealers into dentinal tubules. A systematic advanced search was performed in Scopus, Embase, Medline (via PubMed), Web of Science, and Cochrane databases on the 1 December 2022. In vitro studies that compared the tubular penetration of at least two calcium silicate-based sealers in extracted human teeth were eligible. PRILE 2021 guidelines were used for the assessment of the risk of bias included studies. The search identified a total of 680 preliminary records, among which 12 studies were eligible for review. The most used methodology to evaluate sealer penetration was the use of a fluorochrome together with the tested sealers and the analysis of their penetration under confocal laser microscopy. Regarding the results of the included studies, calcium silicate-based sealers exhibit a favorable dentinal tubule penetration. Tubular penetration, however, can be affected by factors such as the irrigation protocol, sealer activation, the filling method used, and root canal morphology. EndoSequence BC Sealer showed the highest sealer penetration among the tested sealers. The influence of different fluorochromes on the results of dentinal tubule penetration studies should also be further explored. The in vitro nature of the included studies limits the applicability of the results into the clinical setting. Prospero registration: CRD42022383896.

In vitro dentin permeability and tubule occlusion of experimental in-office desensitizing materials

OBJECTIVES

This study investigates the dentin permeability (by hydraulic conductance) and tubule occlusion (by confocal and scanning electron microscopies) of in-office desensitizing materials.

MATERIALS AND METHODS

Bovine dentin blocks were immersed in EDTA to open dentinal tubules. Placebo varnish (PLA), fluoride varnish (FLU), NaF 5% + 5% nanoparticulate sodium trimetaphosphate varnish (TMP), universal adhesive system (SBU), S-PRG filler varnish (SPRG), Biosilicate (BIOS), and amelotin (AMTN) solution were the materials tested. After application, the specimens underwent an erosive-abrasive challenge. Dentin permeability was evaluated at T0 (initial), T1 (after treatment), and T2 (after challenge). Confocal and scanning electron microscopy (SEM) were used to evaluate, respectively, length and number of dentinal tubule occlusions and opened dentinal tubules, after challenge. Permeability and SEM data were analyzed by two-way repeated measures ANOVA and Tukey's tests. Confocal data were analyzed by one-way ANOVA, Tukey's test, and Kruskal-Wallis and Dunn's tests. Spearman and Pearson's correlation tests were also used. Significance level was set at 5%.

RESULTS

At T1, the AMTN group showed the lowest permeability value, following the increasing order at T2: AMTN = SBU < BIOS = SPRG < TMP < FLU < PLA. The SBU group had the highest value of occluded dentinal tubule length. The AMTN group presented more occluded dentinal tubules compared to PLA and FLU. AMTN and SBU had the lowest values of opened dentin tubules. Results showed a negative correlation between the analyses.

CONCLUSION

The SBU and AMTN solution were more effective in reducing dentin permeability by occluding dentin tubules.

CLINICAL RELEVANCE

All materials reduced permeability after challenge, except fluoride varnish.

Influence of dual rinse irrigation on dentinal penetration of a bioceramic root canal sealer: A Conofocal microscopic Analysis

To evaluate the sealer penetration after applying dual rinse irrigant in comparison with sodium hypochlorite and 17% EDTA. Mandibular premolars were prepared by ProTaper Next and irrigated with NaOCl, NaOCl/Dual Rinse or NaOCl/EDTA and then obturated with a single-cone technique and bioceramic-based. Samples were observed using confocal laser microscopy, and the maximum depth of penetration was measured, as well as the percentage of sealer coating the canal wall and the penetration area of the sealer. One-way anova was used, followed by Tukey post hoc test. Sealer penetration area displayed a statistically significant difference between the tested groups (P < 0.05), and the highest percentage of sealer coating the canal wall and the greatest depth of sealer penetration were found in Group (NaOCl/Dual Rinse). Group (NaOCl/Dual Rinse) displayed better sealer penetration inside the dentinal tubules than Group (NaOCl/EDTA), while Group (NaOCl) showed the lowest sealer penetration.

Physico-Chemical Properties of Calcium-Silicate vs. Resin Based Sealers-A Systematic Review and Meta-Analysis of Laboratory-Based Studies

INTRODUCTION

The aim of this systematic review is to analyse the effect of physico-chemical properties of calcium silicate-based sealers in comparison to epoxy resin sealers in permanent teeth using a single-cone obturation technique.

METHODS

The study was conducted according to the guidelines of Cochrane Handbook for Systematic Reviews of Interventions and Preferred Reporting Items for Systematic Review and Meta-Analyses (PRISMA) statement. Literature search was performed using the PubMed/MEDLINE, Cochrane Central Register of Controlled Trials, Web of Science, DOAJ, Open Gray with no language restrictions until October 2020. Two reviewers assessed the studies for eligibility. Grading of Recommendations, Assessment, Development, and Evaluations (GRADE) was carried out to assess the evidence. Meta-analysis of the pooled data with subgroups was performed using the RevMan software (p < 0.05).

RESULTS

Results from the 28 included studies showed that the mean difference in adaptation to root canal walls (marginal adaptation, interfacial gaps and void volume) for both sealers were non-significant. However, void volume values showed a significant mean difference (p < 0.00001) favouring the calcium silicate-based sealers. The pooled meta-analysis reported statistically significant differences for apical microleakage (p = 0.0007) whilst there were non-significant mean differences for fracture resistance (p = 0.09) and push-out bond strength (p = 0.63). The heterogeneity among the included studies was 97% (I²).

CONCLUSIONS

Within the limitations of this review, calcium silicate-based sealers demonstrated a similar or superior performance in comparison to resin-based sealers in terms of the physico-chemical properties.

Traditional Microscopic Techniques Employed in Dental Adhesion Research-Applications and Protocols of Specimen Preparation

Microscopy is a traditional method to perform ex vivo/in vitro dental research. Contemporary microscopic techniques offer the opportunity to observe dental tissues and materials up to nanoscale level. The aim of this paper was to perform a literature review on four microscopic methods, which are widely employed in dental studies concerning the evaluation of resin-dental adhesive interfaces-confocal laser scanning microscopy (CLSM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and atomic force microscopy (AFM). The literature search was performed using digital databases: PubMed, Web of Science and Scopus. On the basis of key words relevant to the topic and established eligibility criteria, finally 84 papers were included in the review. Presented microscopic techniques differ in their principle of operation and require specific protocols for specimen preparation. With regard to adhesion studies, microscopy assists in the description of several elements involved in adhesive bonding, as well as in the assessment of the condition of enamel surface and the most appropriate etching procedures. There are several factors determining the quality of the interaction between the substrates which could be recognized and a potential for further implementation of microscopic techniques in dental research could be recognized, especially when these techniques are used simultaneously or combined with spectroscopic methods. Through such microscopy techniques it is possible to provide clinically relevant conclusions and recommendations, which can be easily introduced for enamel-safe bonding and bonding protocols, as well as optimal pretreatments in dentine preparation.

Comparison of Dentinal Tubule Penetration between a Calcium Silicate-Based Sealer with Ultrasonic Activation and an Epoxy Resin-Based Sealer: A Study Using Confocal Laser Scanning Microscopy

OBJECTIVE

 The aim of this study was to compare the degree of dentinal penetration between an epoxy resin-based sealer applied by using two different filling methods and an ultrasonically activated calcium silicate-based sealer via confocal laser scanning microscopy (CLSM).

MATERIALS AND METHODS

 Forty-five extracted permanent maxillary premolars with type II canals (Vertucci's classification) were subjected to the experiment. The root canals were instrumented and distributed randomly into the following three groups: AH Plus + continuous wave technique (AHC group); AH Plus + single cone technique (AHS group); and Endoseal MTA + single cone technique with ultrasonic activation (EMS) group. Each sealer was labeled with rhodamine B dye to allow visualization under CLSM. The sealer penetration depth in each sample was observed at 2 mm and 5 mm from the apex by using CLSM. The data were statistically analyzed by using analysis of variance or Kruskal-Wallis H test according to normality of variable (α = 0.05).

RESULTS

 In all groups, the maximum sealer penetration depth, mean fluorescence intensity, and sum fluorescence intensity values were higher at the 5-mm level than at the 2-mm level. At the 5-mm level, the EMS group showed the lowest value (p = 0.02). At the 2-mm level, there were no statistically significant differences among any of the groups. The AHC group showed higher values than the other groups, but there was no statistically significant difference in the apical area where access of instruments was difficult.

CONCLUSION

 The AHC group showed the highest dentinal tubule penetration, but had questionable filing efficacy in the apical area, which is of particular importance for the success of root canal treatment. Therefore, in areas such as the apical 2 mm of premolars with type II canals, which are difficult to access by using instruments such as heat carriers, other appropriate approaches may be required accordingly.

The effect of atmospheric cold plasma on the dentinal tubule penetration of calcium silicate-based sealer used with different obturation techniques: A confocal laser scanning microscopy study

The aim of this study was to evaluate the effect of atmospheric cold plasma (ACP) on dentinal tubule penetration of EndoSequence BC. Sixty premolars were divided into four groups according to the obturation technique and plasma treatment. Root canals were filled with single cone in Group 1 (SC), single cone after ACP application in Group 2 (SC-P), warm vertical compaction in Group 3 (WVC), warm vertical compaction after ACP application in Group 4 (WVC-P). Horizontal sections were imaged using confocal laser scanning microscopy. The maximum penetration and percentage of penetration values were measured. These data were statistically analysed (P < 0.01). In the coronal region, the percentage of penetration values were higher in SC-P and WVC-P than in SC and WVC. In the middle region, SC-P and SC showed a higher penetration percentage than WVC and WVC-P. In the apical region, WVC showed a higher percentage of penetration value than SC-P, WVC-P and SC did. Maximum penetration of WVC was higher than of SC and SC-P. Within the limitations of this study, ACP improved the percentage of penetration values of EndoSequence BC when used with single-cone technique.

Confocal laser scanning microscopic analysis of the penetration of an epoxy resin-based sealer into dentinal tubules after calcium hydroxide dressing

This study assessed the penetration of an epoxy resin-based sealer into dentinal tubules of root canals previously medicated with calcium hydroxide. Sixteen palatal root canals of upper molars were instrumented and distributed into two groups: (G1) root canals medicated with calcium hydroxide and obturated after its removal; (G2) root canals obturated without the use of dressing. Sealer mixed with rhodamine B provided fluorescence for confocal laser scanning microscopy. Measurements of area and linear penetration of the sealer were assessed in three thirds by ImageJ software. The data were statistically compared by Kruskal-Wallis, Dunn's and Mann-Whitney U tests (P < 0.01). The calcium hydroxide decreased the penetration of the sealer. The coronal and middle thirds had similar areas and linear penetrations in both groups, whereas the apical third had less penetration. In conclusion, the penetration of the epoxy resin-based sealer is influenced by the calcium hydroxide dressing used between appointments.

Scanning electron microscopy evaluation of dentin ultrastructure after surface demineralization

Context:

Knowledge about dentin microstructure is essential for execution of clinical procedures which require adhesion of materials to dentin.

Aims:

To evaluate by scanning electron microscopy (SEM) the dentin ultrastructure after demineralization with 6 M and 12 M hydrochloric acid (HCl).

Subjects and Methods:

Twenty dentin segments were immersed in fixative solution and dehydrated in ethanol. After 24 h, segments were randomly divided into 2 groups (n = 10), demineralized with 6 M HCl (G6M) and 12 M HCl (G12M), and prepared for SEM analysis.

Statistical Analysis Used:

Based on photomicrographs and chemical composition (energy dispersive X-ray spectroscopy) of dentin, a descriptive analysis was conducted.

Results:

G6M samples revealed a demineralized surface with peritubular dentin exposure and small magnification of the dentinal tubules openings. The intertubular dentin was partially demineralized. Demineralization of G12M samples was more aggressive and at different depths, promoting erosion and “detachment” of dentin layers. Peritubular dentin was observed on the dentin surface. There was a large magnification of the dentinal tubules openings. In both groups, tubular structures showed a similar chemical composition to the intertubular dentin. Lamina limitans was not observed.

Conclusions:

Dentin demineralization is dependent on the HCl molarity and promotes exposure of peritubular dentin.

Could the Calcium Silicate-Based Sealer Presentation Form Influence Dentinal Sealing? An In Vitro Confocal Laser Study on Tubular Penetration

Dentinal tubule penetration influences root canal treatment sealing. The aim of this study was to compare dentinal penetration of two clinical presentations of silicate-based sealers using confocal laser. Sixty single-rooted human teeth from 50-70 year-old patients extracted for orthodontic/periodontal reasons were used. Canals were prepared using Mtwo system up to 35/0.04, with 5.25% NaOCl irrigation and final irrigation using 17% EDTA. Teeth were randomly assigned into study groups (n_i = 20): EndoSequence BC sealer (ES, group 1), BioRoot RCS (BR, group 2); and a control group (n_c = 20) with AH Plus (AHP). Root canals were obturated with 35/0.04 gutta-percha (single-cone technique). The samples were obtained from apical, middle, and coronal thirds. Dentinal tubule penetration depth and percentage of penetration around the canal perimeter were measured. The statistical analysis was performed using Mann Whitney U test and Wilcoxon t-test (95% confidence interval). ES exhibited a significantly higher penetration than AHP in apical and middle thirds (p < 0.05), and in middle and coronal thirds relative to BR (p < 0.05). The percentage of penetration around the canal perimeter was significantly higher for ES compared to BR in all thirds, but only in the apical third for AHP (p < 0.05). The pre-mixed silicate-based sealer exhibited better penetration than the powder/liquid one.

A novel modified obturation technique using biosealers: An ex vivo study

Background:

The root canal anatomy is a complex space, and using a single-cone obturation technique does not guarantee a complete filling.

Aim:

This research aimed to evaluate the actual temperature of the biosealer during the obturation phase inside the root canal using a new hot technique. In addition, this study evaluated the penetration depth of the biosealer inside dentinal tubules.

Setting and Design:

The current study was concluded on two ex vivo experiments; the former tested the temperature evaluation. The latter examined the penetration depth of the biosealer.

Materials and Methods:

In this study, 42 sec mandibular premolars were used, and two experiments were carried out. In the first experiment, two premolars were utilized, and two thermocouples of K-type for each tooth were used. During the second experiment, the penetration depth of the biosealer was examined, 40 teeth were selected. Root canals were prepared then divided into two obturation groups: A, gutta-percha, and biosealer with single-cone technique and B, gutta-percha, and biosealer with a newly proposed obturation method. Confocal laser scanning was used to assess the penetration of the sealer.

Statistical Analysis Used:

In the first experiment, the Bonferroni method was performed to compare the temperature data. The tests used in the second experiment were Shapiro–Wilk's test, Kruskal–Wallis, and Mann–Whitney tests.

Results:

The first experiment results showed that the heat does not reach the apical third using the new obturation method. In the second experiment, the results showed in Group B significantly higher biosealer penetration into the dentinal tubules as compared to Group A (P < 0.05).

Conclusions:

The highest level of penetration of the biosealer in the dentinal tubules was observed in the group of the new obturation method, and the last apical 3 mm remained at 37° using this novel hot modified technique providing no risk of chemical alteration of the biosealer.

Microscopic and chemical evaluation of the filling quality of five obturation techniques in oval-shaped root canals

OBJECTIVES

The aim of this study was to assess the filling quality of five obturation techniques in oval-shaped root canals.

MATERIALS AND METHODS

A total of 212 mandibular first molars with one distal oval canal were selected. Distal canals, shaped with WaveOne Gold Primary, were randomly divided in five groups (n = 40) for obturation: continuous wave condensation, GuttaCore, Thermafil, single cone with AH plus, and single cone with BioRoot RCS. The proportions of gutta-percha-filled areas (GPFA), sealer-filled areas (SFA), void areas (VA), and the sealer/gutta tags into dentinal tubules at 4 mm and 2 mm from the apex were analyzed by an optical numeric microscope, SEM, and energy-dispersive X-ray (EDX). Data were then compared by Kruskal-Wallis one-way ANOVA on ranks (α = 0.05).

RESULTS

At 4 mm, a statistically significant higher GPFA and lower SFA were observed in the GuttaCore and Thermafil groups compared with the 3 other groups. A statistically significant lower VA was observed in the continuous wave condensation, GuttaCore, and Thermafil groups than in the two single-cone groups. At 2 mm, there were a statistically significant higher GPFA and lower SFA and VA in GuttaCore and Thermafil groups than in the 3 other groups. At the two levels investigated, the presence of gutta-percha tags was clearly demonstrated for GuttaCore and Thermafil groups; no tags were observed in the 3 other groups.

CONCLUSIONS

Obturation quality was overall improved in GuttaCore and Thermafil groups.

CLINICAL RELEVANCE

Carrier-based techniques may significantly improve the filling quality compared to continuous wave condensation and single-cone technique. The single-cone technique might have inherent limitations especially in oval root canals regardless of the sealer used.

Chemical and Mechanical Roughening Treatments of a Supra-Nano Composite Resin Surface: SEM and Topographic Analysis

Background: Repairing a restoration is a more advantageous and less invasive alternative to its total makeover. The aim of this study was to analyze the effects of chemical and mechanical surface treatments aimed at increasing the roughness of a supra-nano composite resin. Methods: 27 cylindrical blocks of microhybrid composite were made. The samples were randomly divided into nine groups (n = 3). The samples’ surface was treated differently per each group: acid etching (35% H3PO4, 30 s and 60 s), diamond bur milling, sandblasting and the combination of mechanical treatment and acid etching. The samples’ surface was observed by a scanning electron microscope (SEM) and a confocal microscope for observational study, and surface roughness (Ra) was recorded for quantitative analysis. Results: The images of the samples sandblasted with Al2O3 showed the greatest irregularity and the highest number of microcavities. The surfaces roughened by diamond bur showed evident parallel streaks and sporadic superficial microcavities. No significant roughness differences were recorded between other groups. The difference in roughness between the control group, diamond bur milled group and sandblasted group was statistically significant. (p < 0.01). Comparison between the diamond bur milled group and the sandblasted group was also significant (p < 0.01). Conclusion: According to our results, sandblasting is the best treatment to increase the surface roughness of a supra-nano composite.

Percentage of Gutta-Percha-, Sealer-, and Void-Filled Areas in Oval-Shaped Root Canals Obturated with Different Filling Techniques: A Confocal Laser Scanning Microscopy Study

Objective  This study compared different obturation techniques, analyzing percentage of areas filled with gutta-percha, sealer, and voids (PGFA, PSFA, and PVFA, respectively) in oval-shaped root canals.

Materials and Methods  A total of 60 extracted human mandibular central incisors were decoronated, instrumented, and irrigated using the same protocol. After drying, the root canal was filled with AH Plus labeled with 0.1% rhodamine B dye using a Lentulo spiral. The filling procedure was performed by dividing the teeth into four groups according to the respective technique: G1, cold lateral condensation; G2, continuous wave of condensation; G3, modified cold lateral condensation using an F3 master cone; and G4, modified continuous wave of condensation using an ISO (International Organization for Standardization) sized 30 gutta-percha cone. Then, slices measuring 1.5 mm in thickness were obtained 3 and 6 mm from the apex and evaluated by confocal laser scanning microscopy to determine PGFA, PSFA, and PVFA.

Statistical Analysis  The data were analyzed statistically with analysis of variance and Games-Howell’s tests ( p = 0.05).

Results  The groups showed no significant differences in the apical third (3 mm from the apex). In the middle third (6 mm from the apex), G3 and G1 showed higher PGFA and PVFA, respectively. G3 showed lower PSFA than G2 and G4. Both cold techniques (G1 and G3) promoted lower PSFA than both warm techniques (G2 and G4).

Conclusions  Notwithstanding the limitations of this in vitro study, PGFA, PSFA, and PVFA ranged significantly only in the middle third, as observed by the different filling techniques. Higher PGFA and PVFA values were obtained for G3 and G1, respectively. Both cold techniques promoted lower PSFA than both warm techniques.

Correlation between Bond Strength to Dentin and Sealers Penetration by Push-Out Test and CLSM Analysis

This study correlated the bond strength (BS) and dentin penetration of different sealers by push-out test and Confocal Laser Scanning Microscopy (CLSM) analysis. Forty-five root canals were prepared according to the crown-down technique and filled with gutta-percha associated to the following sealers (n=15): Endofill, AH Plus and MTA Fillapex. Five canals of each group were filled with the sealers added with 0.1% Rhodamine B dye. Next, the specimens were transversely sectioned and submitted to the push-out test (n=10) and CLSM analysis (n=5). The BS data showed the following means (MPa) and standard deviation: AH Plus (4.17±1.86); MTA Fillapex (3.13±1.96) and Endofill (2.10±1.03). Statistical analysis (two-way ANOVA, α=0.05) showed significant difference among sealers (p<0.001) and root canal thirds (p<0.001). The BS results of Endofill and MTA Fillapex were statistically similar (p>0.05), however, they were statistically different from AH Plus (p<0.001). The regional analysis of BS showed similarity between middle and apical thirds (p>0.05), and both were different from coronal portion (p<0.001). CLSM analysis verified tags formation in all groups and higher penetration of the specimens filled with AH Plus (p<0.05). The Kendall test (correlation between BS to dentin and sealer penetration into dentinal tubules) and the Pearson test (between failures pattern and sealer penetration into dentinal tubules) did not show correlation between the variables evaluated for all the tested sealers (p>0.05). AH Plus group had higher BS to dentin, and deeper tags formation than the other sealers. There was no significant correlation between BS and intratubular penetration of the tested sealers.

Effect of peracetic acid used as single irrigant on the smear layer, adhesion, and penetrability of AH Plus

The aim of this study was to evaluate the effect of peracetic acid (PAA) as a single irrigant on the smear layer, on the intraradicular dentinal bond strength, and on the penetrability of an epoxy-based resin sealer into the dentinal tubules. A total of 120 roots were distributed into 4 groups according to the irrigant used in root canal preparation: 1% PAA (PAA); 2.5% NaOCl followed by final irrigation with 17% EDTA and 2.5% NaOCl (NaOCl-EDTA-NaOCl); 2.5% NaOCl (NaOCl); and saline solution (SS). The smear layer was evaluated using scanning electron microscopy. The bond strength of an epoxy-based resin sealer (AH Plus) to root dentin was evaluated by the push-out test and penetrability of the sealer into dentinal tubules was observed by confocal laser microscopy. The results were analyzed by the Kruskal-Wallis and the Dunn post-test (α = 0.05). The use of 1% PAA as single root canal irrigant provided smear layer removal and improved the penetrability and bond strength of AH Plus to root dentin in a manner similar to that of the NaOCl-EDTA-NaOCl group (p > 0.05). The NaOCl and SS groups had higher values of smear layer and lower values of sealer penetrability and dentin bond strength than the PAA and NaOCl-EDTA-NaOCl groups (p < 0.05). Thus, 1% PAA has the potential to be used as a single irrigant in root canals.

Influence of the EndoActivator Irrigation System on Dentinal Tubule Penetration of a Novel Tricalcium Silicate-Based Sealer

This study compared the effects of a conventional endodontic needle with an agitation system on a novel tricalcium silicate-based sealer (NTS) in terms of dentinal tubule penetration and interfacial adaptation to a root canal. Fifty single-rooted, recently-extracted human maxillary central incisors were randomly distributed into two homogeneous groups characterized by two different final cleansing systems: Conventional endodontic needle, or EndoActivator^®. After instrumentation, all the teeth were filled with the gutta-percha single cone technique in conjunction with the novel tricalcium silicate-based sealer. Teeth were horizontally sectioned at 1 and 5 mm from the apex and were observed under a confocal laser scanning microscope (CLSM) at five magnifications. The maximum, mean, and the circumferential percentage of the sealer penetration inside the tubules were measured. Moreover, the gap width was evaluated using Image J software (National Institutes of Health, Bethesda, MD). EndoActivator^® did not result in a significantly higher circumferential percentage of sealer penetration than conventional irrigation (p > 0.05). However, the gap width was significantly lower with EndoActivator^®, compared to conventional needles at both 1 mm (p = 0.035) and 5 mm (p = 0.038). The EndoActivator^® irrigation system did not significantly improve the NTS penetration, as compared to the conventional endodontic needle irrigation. Activation of the irrigation reduced the gap width significantly.