Xylanases of marine fungi of potential use for biobleaching of paper pulp

Diversity and characterization of culturable fungi associated with the marine sea cucumber Holothuria scabra

Fungi associated with the marine echinoderm, Holothuria scabra, produces extracellular enzymes and bioactive metabolites, and mycoviruses that could be used for biotechnological and pharmaceutical applications. The species identification based on molecular and morphological characteristics classified the culturable fungi into twenty-three genera belonging to eight orders, Chaetothyriales, Eurotiales, Hypocreales, Mucorales, Mycosphaerellales, Onygenales, Pleosporales and Venturiales, from four classes, Eurotiomycetes, Dothideomycetes, Mucoromycetes and Sordariomycetes of the two phyla Ascomycota and Mucoromycota. The most frequent genera were Aspergillus (relative frequency, 45.30%) and Penicillium (relative frequency, 22.68%). The Menhinick species richness and Shannon species diversity indices were 1.64 and 2.36, respectively, indicating a high diversity of fungi. An enzymatic production test revealed that sixteen isolates could produce proteases and amylases at different levels. The presence of mycoviruses was detected in eight isolates with different genomic profiles. Thirty-two of the 55 isolates produced antimicrobial metabolites which had an inhibitory effect on various microbial pathogens. Most of these active isolates were identified as Aspergillus, Penicillium and Trichoderma. Notably, Aspergillus terreus F10M7, Trichoderma harzianum F31M4 and T. harzianum F31M5 showed the most potent activity against both Gram-positive and Gram-negative bacteria and human pathogenic fungi. Our study represents the first report of the mycobiota associated with the marine echinoderm Holothuria scabra.

Effects of Epigenetic Modification and High Hydrostatic Pressure on Polyketide Synthase Genes and Secondary Metabolites of Alternaria alternata Derived from the Mariana Trench Sediments

The hadal biosphere is the most mysterious ecosystem on the planet, located in a unique and extreme environment on Earth. To adapt to extreme environmental conditions, hadal microorganisms evolve special strategies and metabolisms to survive and reproduce. However, the secondary metabolites of the hadal microorganisms are poorly understood. In this study, we focused on the isolation and characterization of hadal fungi, screening the potential strains with bioactive natural products. The isolates obtained were detected further for the polyketide synthase (PKS) genes. Two isolates of Alternaria alternata were picked up as the representatives, which had the potential to synthesize active natural products. The epigenetic modifiers were used for the two A. alternata isolates to stimulate functional gene expression in hadal fungi under laboratory conditions. The results showed that the chemical epigenetic modifier, 5-Azacytidine (5-Aza), affected the phenotype, PKS gene expression, production of secondary metabolites, and antimicrobial activity of the hadal fungus A. alternata. The influence of epigenetic modification on natural products was strongest when the concentration of 5-Aza was 50 μM. Furthermore, the modification of epigenetic agents on hadal fungi under high hydrostatic pressure (HHP) of 40 MPa displayed significant effects on PKS gene expression, and also activated the production of new compounds. Our study demonstrates the high biosynthetic potential of cultivable hadal fungi, but also provides evidence for the utility of chemical epigenetic modifiers on active natural products from hadal fungi, providing new ideas for the development and exploitation of microbial resources in extreme environments.

Thermo-alkali stable bacterial xylanase for deinking of copier paper

BACKGROUND

The bleach-boosting capability of xylanases is well-known. The use of xylanase pre-treatment before the application of chemical bleach has multiple advantages including (i) lesser use of polluting chemicals of the traditional bleaching process; (ii) less damage to the cellulosic fibers, therefore better recyclability; and (iii) better brightness of chemical bleach. The major impediment in the application is the availability of commercial enzymes that are active at the elevated temperature and pH that exist during the industrial pulping process. In the present paper, xylanase having suitability for application in deinking is reported.

RESULTS

The xylanase used showed high deinking potential. Optimal deinking was obtained at the xylanase dosing of 20U/g of the dried pulp at 60℃ for a treatment time of 1h. It could bring about a 50% reduction in the usage of chemical bleach that was applied after xylanase pre-treatment. The comparison of FTIR spectra showed changes in intensity without significant changes in the functional group signatures implying that there is negligible damage to the fiber strength in the xylanase pre-treatment process as compared to the chemical bleach process.

CONCLUSION

The xylanase used in this study was effective in deinking paper pulp and can be used for bio-bleaching of recycled paper.

Mangrove-associated endomycota: diversity and functional significance as a source of novel drug leads

Endophytic fungi are known for their unprecedented ability to produce novel lead compounds of clinical and pharmaceutical importance. This review focuses on the unexplored fungal diversity associated with mangroves, emphasizing their biodiversity, distribution, and methodological approaches targeting isolation, and identification. Also highlights the bioactive compounds reported from the mangrove fungal endophytes. The compounds are categorized according to their reported biological activities including antimicrobial, antioxidant and cytotoxic property. In addition, protein kinase, α-glucosidase, acetylcholinesterase, tyrosinase inhibition, antiangiogenic, DNA-binding affinity, and calcium/potassium channel blocking activity are also reported. Exploration of these endophytes as a source of pharmacologically important compounds will be highly promising in the wake of emerging antibiotic resistance among pathogens. Thus, the aim of this review is to present a detailed report of mangrove derived endophytic fungi and to open an avenue for researchers to discover the possibilities of exploring these hidden mycota in developing novel drug leads.

Marine enzymes: Classification and application in various industries

Oceans are regarded as a plentiful and sustainable source of biological compounds. Enzymes are a group of marine biomaterials that have recently drawn more attention because they are produced in harsh environmental conditions such as high salinity, extensive pH, a wide temperature range, and high pressure. Hence, marine-derived enzymes are capable of exhibiting remarkable properties due to their unique composition. In this review, we overviewed and discussed characteristics of marine enzymes as well as the sources of marine enzymes, ranging from primitive organisms to vertebrates, and presented the importance, advantages, and challenges of using marine enzymes with a summary of their applications in a variety of industries. Current biotechnological advancements need the study of novel marine enzymes that could be applied in a variety of ways. Resources of marine enzyme can benefit greatly for biotechnological applications duo to their biocompatible, ecofriendly and high effectiveness. It is beneficial to use the unique characteristics offered by marine enzymes to either develop new processes and products or improve existing ones. As a result, marine-derived enzymes have promising potential and are an excellent candidate for a variety of biotechnology applications and a future rise in the use of marine enzymes is to be anticipated.

Current Progress in Optimising Sustainable Energy Recovery From Cattle Paunch Contents, a Slaughterhouse Waste Product

Paunch contents are the recalcitrant, lignocellulose-rich, partially-digested feed present in the rumen of ruminant animals. Cattle forage in Europe is primarily from perennial and Italian ryegrasses and/or white clover, so paunch contents from forage-fed cattle in Europe is enriched in these feedstuffs. Globally, due to its underutilisation, the potential energy in cattle paunch contents annually represents an energy loss of 23,216,548,750–27,804,250,000 Megajoules (MJ) and financial loss of up to ~€800,000,000. Therefore, this review aims to describe progress made to-date in optimising sustainable energy recovery from paunch contents. Furthermore, analyses to determine the economic feasibility/potential of recovering sustainable energy from paunch contents was carried out. The primary method used to recover sustainable energy from paunch contents to-date has involved biomethane production through anaerobic digestion (AD). The major bottleneck in its utilisation through AD is its recalcitrance, resulting in build-up of fibrous material. Pre-treatments partially degrade the lignocellulose in lignocellulose-rich wastes, reducing their recalcitrance. Enzyme systems could be inexpensive and more environmentally compatible than conventional solvent pre-treatments. A potential source of enzyme systems is the rumen microbiome, whose efficiency in lignocellulose degradation is attracting significant research interest. Therefore, the application of rumen fluid (liquid derived from dewatering of paunch contents) to improve biomethane production from AD of lignocellulosic wastes is included in this review. Analysis of a study where rumen fluid was used to pre-treat paper sludge from a paper mill prior to AD for biomethane production suggested economic feasibility for CHP combustion, with potential savings of ~€11,000 annually. Meta-genomic studies of bacterial/archaeal populations have been carried out to understand their ruminal functions. However, despite their importance in degrading lignocellulose in nature, rumen fungi remain comparatively under-investigated. Further investigation of rumen microbes, their cultivation and their enzyme systems, and the role of rumen fluid in degrading lignocellulosic wastes, could provide efficient pre-treatments and co-digestion strategies to maximise biomethane yield from a range of lignocellulosic wastes. This review describes current progress in optimising sustainable energy recovery from paunch contents, and the potential of rumen fluid as a pre-treatment and co-substrate to recover sustainable energy from lignocellulosic wastes using AD.

High hydrostatic pressure shapes the development and production of secondary metabolites of Mariana Trench sediment fungi

The hadal biosphere is one of the least understood ecosystems on our planet. Recent studies have revealed diverse and active communities of prokaryotes in hadal sediment. However, there have been few studies on fungi in hadal sediment. Here we report the first isolation and cultivation of 8 fungi from the Mariana Trench sediment. The individual colonies were isolated and identified as Stemphylium sp., Cladosporium sp., Arthrinium sp., Fusarium sp., Alternaria sp., and Aspergillus sp. High hydrostatic pressure (HHP) test was carried out to identify the piezophily of these hadal fungi. Among them, 7 out of the 8 fungal isolates exhibited the ability of germination after incubation under 40 MPa for 7 days. Vegetative growth of the isolates was also affected by HHP. Characterization of secondary metabolites under different pressure conditions was also performed. The production of secondary metabolites was affected by the HHP treatment, improving the potential of discovering novel natural products from hadal fungi. The antibacterial assay revealed the potential of discovering novel natural products. Our results suggest that fungal growth pressure plays an important role in the development and production of secondary metabolites of these hadal fungi under the extreme environment in the Mariana Trench.

High-Level Heterologous Expression of Endo-1,4-β-Xylanase from Penicillium citrinum in Pichia pastoris X-33 Directed through Codon Optimization and Optimized Expression

Most common industrial xylanases are produced from filamentous fungi. In this study, the codon-optimized xynA gene encoding xylanase A from the fungus Penicilium citrinum was successfully synthesized and expressed in the yeast Pichia pastoris. The levels of secreted enzyme activity under the control of glyceraldehyde-3-phosphate dehydrogenase (P_GAP) and alcohol oxidase 1 (P_AOX1) promoters were compared. The Pc Xyn11A was produced as a soluble protein and the total xylanase activity under the control of P_GAP and P_AOX1 was 34- and 193-fold, respectively, higher than that produced by the native strain of P. citrinum. The Pc Xyn11A produced under the control of the P_AOX1 reached a maximum activity of 676 U/mL when induced with 1% (v/v) methanol every 24 h for 5 days. The xylanase was purified by ion exchange chromatography and then characterized. The enzyme was optimally active at 55 °C and pH 5.0 but stable over a broad pH range (3.0–9.0), retaining more than 80% of the original activity after 24 h or after pre-incubation at 40 °C for 1 h. With birchwood xylan as a substrate, Pc Xyn11A showed a K_m(app) of 2.8 mg/mL, and a k_cat of 243 s⁻¹. The high level of secretion of Pc Xyn11A and its stability over a wide range of pH and moderate temperatures could make it useful for a variety of biotechnological applications.

Marine Fungi: Biotechnological Perspectives from Deep-Hypersaline Anoxic Basins

Deep-sea hypersaline anoxic basins (DHABs) are one of the most hostile environments on Earth. Even though DHABs have hypersaline conditions, anoxia and high hydrostatic pressure, they host incredible microbial biodiversity. Among eukaryotes inhabiting these systems, recent studies demonstrated that fungi are a quantitatively relevant component. Here, fungi can benefit from the accumulation of large amounts of organic material. Marine fungi are also known to produce bioactive molecules. In particular, halophilic and halotolerant fungi are a reservoir of enzymes and secondary metabolites with valuable applications in industrial, pharmaceutical, and environmental biotechnology. Here we report that among the fungal taxa identified from the Mediterranean and Red Sea DHABs, halotolerant halophilic species belonging to the genera Aspergillus and Penicillium can be used or screened for enzymes and bioactive molecules. Fungi living in DHABs can extend our knowledge about the limits of life, and the discovery of new species and molecules from these environments can have high biotechnological potential.

Biotechnology Potential of Marine Fungi Degrading Plant and Algae Polymeric Substrates

Filamentous fungi possess the metabolic capacity to degrade environment organic matter, much of which is the plant and algae material enriched with the cell wall carbohydrates and polyphenol complexes that frequently can be assimilated by only marine fungi. As the most renewable energy feedstock on the Earth, the plant or algae polymeric substrates induce an expression of microbial extracellular enzymes that catalyze their cleaving up to the component sugars. However, the question of what the marine fungi contributes to the plant and algae material biotransformation processes has yet to be highlighted sufficiently. In this review, we summarized the potential of marine fungi alternatively to terrestrial fungi to produce the biotechnologically valuable extracellular enzymes in response to the plant and macroalgae polymeric substrates as sources of carbon for their bioconversion used for industries and bioremediation.

Enhanced production of xylanase by Fusarium sp. BVKT R2 and evaluation of its biomass saccharification efficiency

Growth of Fusarium sp. BVKT R2, a potential isolate of forest soils of Eastern Ghats on birchwood xylan in mineral salts medium (MSM) under un-optimized conditions of 30 °C, pH of 5.0, 150 rpm and inoculum size of 5 agar plugs for 7 days, yielded titer of 1290 U/mL of xylanase (EC 3.2.1.8). The effect of various operating parameters such as different substrates and their concentration, additional carbon and nitrogen sources, incubation temperature, initial pH, agitation and inoculum size on the production of xylanase by Fusarium sp. BVKT R2 was studied in shake flask culture by one factor at a time approach. The same culture exhibited higher production of xylanase (4200 U/mL) when grown on birch wood xylan in MSM under optimized conditions with an additional carbon source-sorbitol (1.5%) nitrogen source-yeast extract (1.5%) temperature of 30 °C, pH of 5.0, agitation of 200 rpm and inoculum of 6 agar plugs for only 5 days. There was enhancement in xylanase production under optimized conditions by 3.2 folds over yields under un-optimized conditions. Growth of BVKT R2 culture on locally available lignocelluloses-sawdust, rice straw and cotton stalk-in MSM for 5 days released soluble sugars to the maximum extent of 52.76% with respect to sawdust indicating its greater importance in saccharification essential for biotechnological applications.

Fungal community dynamics during a marine dinoflagellate (Noctiluca scintillans) bloom

Contamination and eutrophication have caused serious ecological events (such as algal bloom) in coastal area. During this ecological process, microbial community structure is critical for algal bloom succession. The diversity and composition of bacteria and archaea communities in algal blooms have been widely investigated; however, those of fungi are poorly understood. To fill this gap, we used pyrosequencing and correlation approaches to assess fungal patterns and associations during a dinoflagellate (Noctiluca scintillans) bloom. Phylum level fungal types were predominated by Ascomycota, Chytridiomycota, Mucoromycotina, and Basidiomycota. At the genus level drastic changes were observed with Hysteropatella, Malassezia and Saitoella dominating during the initial bloom stage, while Malassezia was most abundant (>50%) during onset and peak-bloom stages. Saitoella and Lipomyces gradually became more abundant and, in the decline stage, contributed almost 70% of sequences. In the terminal stage of the bloom, Rozella increased rapidly to a maximum of 50-60%. Fungal population structure was significantly influenced by temperature and substrate (N and P) availability (P < 0.05). Inter-specific network analyses demonstrated that Rozella and Saitoella fungi strongly impacted the ecological trajectory of N. scintillans. The functional prediction show that symbiotrophic fungi was dominated in the onset stage; saprotroph type was the primary member present during the exponential growth period; whereas pathogentroph type fungi enriched in decline phase. Overall, fungal communities and functions correlated significantly with N. scintillans processes, suggesting that they may regulate dinoflagellate bloom fates. Our results will facilitate deeper understanding of the ecological importance of marine fungi and their roles in algal bloom formation and collapse.

Xylanase production from marine derived Trichoderma pleuroticola 08ÇK001 strain isolated from Mediterranean coastal sediments

Xylanases constitutes one the most important enzymes with diverse applications in different industries such as bioethanol production, animal feedstock production, production of xylo-oligosaccharides, baking industry, paper and pulp industry, xylitol production, fruit juice, and beer finishing, degumming, and agriculture. Currently, industrial xylanases are mainly produced by Aspergillus and Trichoderma members. Since the marine environments are less studied compared to terrestrial environments and harbors great microbial diversity we aimed to investigate the xylanase production of 88 marine-derived filamentous fungal strains. These strains are semi-quantitatively screened for their extracellular xylanase production and Trichoderma pleuroticola 08ÇK001 xylanase activity was further characterized. Optimum pH and temperature was determined as 5.0 and 50 °C, respectively. The enzyme preparation retained 53% of its activity at pH 5.0 after 1 h and have found resistant against several ions and compounds such as K⁺ , Ba²⁺ , Na⁺ , β-mercaptoethanol, Triton X-100 and toluene. This study demonstrates that marine-derived fungal strains are prolific sources for xylanase production and presents the first report about the production and characterization of xylanase from a marine derived T. pleuroticola strain. The characteristics of T. pleuroticola 08ÇK001 xylanase activity indicate possible employment in some industrial processes such as animal feed, juice and wine industries or paper pulping applications.

Marine-derived fungus Aspergillus cf. tubingensis LAMAI 31: a new genetic resource for xylanase production

Marine-derived fungi have been reported as relevant producers of enzymes, which can have different properties in comparison with their terrestrial counterparts. The aim of the present study was to select from a collection of 493 marine-derived fungi the best producer of xylanase in order to evaluate the enzymatic production under different conditions. A total of 112 isolates produced xylanase in solid medium containing xylan as the carbon source, with 31 of them able to produce at least 10 U/mL of the enzyme. The best production (49.41 U/mL) was achieved by the strain LAMAI 31, identified as Aspergillus cf. tubingensis. After confirming the lack of pathogenicity (absence of ochratoxin A and fumonisin B₂ production) this fungus was submitted to the experimental design in order to evaluate the effect of different variables on the enzymatic production, with the aim of optimizing culture conditions. Three experimental designs (two Plackett–Burman and one factorial fractional) were applied. The best condition for the enzymatic production was defined, resulting in an increase of 12.7 times in comparison with the initial production during the screening experiments. In the validation assay, the peak of xylanase production (561.59 U/mL) was obtained after 96 h of incubation, being the best specific activity achieved after 72 h of incubation. Xylanase from A. cf. tubingensis LAMAI 31 had optimum pH and temperature at 5.0 and 55 °C, respectively, and was shown to be stable at a range of 40–50 °C, and in pH from 3.6 to 7.0. Results from the present work indicate that A. cf. tubingensis LAMAI 31 can be considered as a new genetic resource for xylanase production.

Marine-derived fungi: diversity of enzymes and biotechnological applications

The ocean is considered to be a great reservoir of biodiversity. Microbial communities in marine environments are ecologically relevant as intermediaries of energy, and play an important role in nutrient regeneration cycles as decomposers of dead and decaying organic matter. In this sense, marine-derived fungi can be considered as a source of enzymes of industrial and/or environmental interest. Fungal strains isolated from different substrates, such as invertebrates, decaying wood, seawater, sediments, and mangrove detritus, have been reported to be producers of hydrolytic and/or oxidative enzymes, with alginate lyase, amylase, cellulase, chitinase, glucosidase, inulinase, keratinase, ligninase, lipase, nuclease, phytase, protease, and xylanase being among the enzymes produced by fungi of marine origin. These enzymes present temperature and pH optima ranging from 35 to 70(∘)C, and 3.0 to 11.0, respectively. High-level production in bioreactors is mainly performed using submerged-state fermentation. Certain marine-derived fungal strains present enzymes with alkaline and cold-activity characteristics, and salinity is considered an important condition in screening and production processes. The adaptability of marine-derived fungi to oceanic conditions can be considered an attractive point in the field of fungal marine biotechnology. In this review, we focus on the advances in discovering enzymes from marine-derived fungi and their biotechnological relevance.

Proteomics meets blue biotechnology: a wealth of novelties and opportunities

Blue biotechnology, in which aquatic environments provide the inspiration for various products such as food additives, aquaculture, biosensors, green chemistry, bioenergy, and pharmaceuticals, holds enormous promise. Large-scale efforts to sequence aquatic genomes and metagenomes, as well as campaigns to isolate new organisms and culture-based screenings, are helping to push the boundaries of known organisms. Mass spectrometry-based proteomics can complement 16S gene sequencing in the effort to discover new organisms of potential relevance to blue biotechnology by facilitating the rapid screening of microbial isolates and by providing in depth profiles of the proteomes and metaproteomes of marine organisms, both model cultivable isolates and, more recently, exotic non-cultivable species and communities. Proteomics has already contributed to blue biotechnology by identifying aquatic proteins with potential applications to food fermentation, the textile industry, and biomedical drug development. In this review, we discuss historical developments in blue biotechnology, the current limitations to the known marine biosphere, and the ways in which mass spectrometry can expand that knowledge. We further speculate about directions that research in blue biotechnology will take given current and near-future technological advancements in mass spectrometry.

Biobleaching application of cellulase poor and alkali stable xylanase from Bacillus pumilus SV-85S

The potential of extracellular alkali stable and thermo tolerant xylanase produced by Bacilluspumilus SV-85S through solid state fermentation was investigated in pulp bleaching in association with conventional bleaching using chlorine and chlorine dioxide. The biobleaching of kraft pulp with xylanase was the most effective at an enzyme dose of 10 IU/g oven dried pulp, pH 9.0 and 120 min incubation at 55 °C. Under the optimized conditions, xylanase pretreatment reduced Kappa number by 1.6 points and increased brightness by 1.9 points. Subsequently, chlorine dioxide and alkaline bleaching sequences (CDE₁D₁D₂) finally resulted in brightness gain of 2.7 points as compared with the control. The pretreatment of pulp with xylanase resulted in 29.16 % reduction in chlorine consumption by maintaining the same brightness as in control. An improvement in pulp strength properties was also observed after bleaching of xylanase pretreated pulp. Scanning electron microscopy revealed loosening and swelling of pulp fibers after enzyme treatment. These results clearly demonstrated that the B. pumilus SV-85S xylanase was effective as a pulp biobleaching agent. The decrease in chlorine consumption by pretreatment of pulp with xylanase apparently made the biobleaching process not only economical but also eco-friendly.

Coupled production of single cell oil as biodiesel feedstock, xylitol and xylanase from sugarcane bagasse in a biorefinery concept using fungi from the tropical mangrove wetlands

This work evaluates sugarcane bagasse (SCB) conversion, in a biorefinery approach, to coproduce biodiesel and high value products using two novel mangrove fungi. On acid pre-treatment, sugarcane bagasse hydrolysate (SCBH) resulted in a xylitol yield of 0.51 g/g xylose consumed in 72 h by Williopsis saturnus. After SCB pretreatment, sugarcane bagasse residue (SCBR) was utilized using Aspergillus terreus for production of xylanase (12.74 U/ml) and cell biomass (9.8 g/L) which was extracted for single cell oil (SCO; 0.19 g/g) and transesterified to biodiesel. The FAME profile exhibited long chain SFAs and PUFAs with predicted biodiesel properties lying within the range specified by international standards. This biorefining approach of SCB utilization for co-production of xylitol, xylanase and SCO gains importance in terms of sustainability and eco-friendliness.

Production of xylanases by mangrove fungi from the Philippines and their application in enzymatic pretreatment of recycled paper pulps

Mangrove fungi are vastly unexplored for enzymes with industrial application. This study aimed to assess the biocatalytic activity of mangrove fungal xylanases on recycled paper pulp. Forty-four mangrove fungal (MF) isolates were initially screened for xylanolytic activity in minimal medium with corn cob xylan as the sole carbon source. Eight MF were further cultivated under submerged fermentation for the production of crude xylanases. These crude enzymes were then characterized and tested for the pretreatment of recycled paper pulps. Results showed that 93 % of the tested MF isolates exhibited xylanolytic activity in solid medium. In submerged fermentation, salinity improved the growth of the fungal isolates but did not influence xylanase production. The crude xylanases were mostly optimally active at 50 °C and pH 7. Changes in pH had a greater effect on xylanase stability than temperature. More than half of the activity was lost at pH 9 for majority of the crude enzymes. However, two thermophilic xylanases from Fusarium sp. KAWIT-A and Aureobasidium sp. 2LIPA-M and one alkaliphilic xylanase from Phomopsis sp. MACA-J were also produced. All crude enzymes exhibited cellulase activities ranging from 4 to 21 U/ml. Enzymatic pretreatment of recycled paper pulps with 5 % consistency produced 70-650 mg of reducing sugars per gram of pulp at 50 °C after 60 min. The release of high amounts of reducing sugars showed the potential of mangrove fungal crude xylanases in the local paper and pulp industry. The diverse properties shown by the tested crude enzymes also indicate its potential applications to other enzyme-requiring industries.

Application of marine microbial enzymes in the food and pharmaceutical industries

Over billions of years, the ocean is regarded as the origin of life on Earth, and the ocean includes the largest habitats hosting the most life forms. Competition among microorganisms for space and nutrients in the marine environment is a powerful selective force, which has led to the evolution. The evolution prompts the marine microorganisms to generate multifarious enzyme systems to adapt to the complicated marine environments. Therefore, marine microbial enzymes can offer novel biocatalysts with extraordinary properties. This review deals with the research and development work done on the occurrence and bioprocessing of marine microbial enzymes.

Optimization of xylanase production from Aspergillus niger for biobleaching of eucalyptus pulp

A crude endo-xylanase produced by Aspergillus niger BCC14405 was investigated for its potential in pre-bleaching of chemical pulp from eucalyptus. The optimal fermentation conditions on the basis of optimization using response surface methodology included cultivation in a complex medium comprising wheat bran, rice bran, and soybean meal supplemented with yeast extract, glucose, peptone, and lactose with a starting pH of 6.0 for 7 d. This resulted in production of 89.5 IU/mL of xylanase with minor cellulase activity. Proteomic analysis using LC/MS/MS revealed that the crude enzyme was a composite of hemicellulolytic enzymes, including endo-β-1,4-xylanase and other hemicellulolytic enzymes attacking arabinoxylan and mannan. Pretreatment of the pulp at a xylanase dosage of 10 IU/g increased the brightness ceiling after the C-Eop-H bleaching step up to 3.0% using a chlorine charge with a C-factor of 0.16-0.20. Xylanase treatment also led to reduction in chlorine charge of at least 20%, with an acceptable brightness level. The enzyme pretreatment resulted in a slight increase in pulp viscosity, suggesting an increase in relative cellulose content. The crude enzyme was potent in the enzyme-aided bleaching of chemical pulp in an environmentally friendly pulping process.

Research and application of marine microbial enzymes: status and prospects

Over billions of years, the ocean has been regarded as the origin of life on Earth. The ocean includes the largest range of habitats, hosting the most life-forms. Competition amongst microorganisms for space and nutrients in the marine environment is a powerful selective force, which has led to evolution. The evolution prompted the marine microorganisms to generate multifarious enzyme systems to adapt to the complicated marine environments. Therefore, marine microbial enzymes can offer novel biocatalysts with extraordinary properties. This review deals with the research and development work investigating the occurrence and bioprocessing of marine microbial enzymes.

Error-prone PCR of a fungal xylanase for improvement of its alkaline and thermal stability

Random mutagenesis was used to improve the alkaline and thermal stability of the xylanase (XynA) from Thermomyces lanuginosus. Error-prone PCR reactions were carried out; the PCR products were cloned into Escherichia coli and a library of 960 clones was selected on xylan-containing agar plates. The crude filtrates of positive xylanase producers were screened at 80 degrees C and tested separately at pH 10 for alkaline tolerance. The native XynA lost 80% activity after 90 min at 80 degrees C and lost 70% activity at pH 10. Conversely, the most thermostable variant, G41, retained 75% activity after 90 min at 80 degrees C and the best alkali-stable variant, G53, retained 93% activity at pH 10. Sequence analysis revealed four amino acid substitutions in G41 and a single substitution in G53. These variants, therefore, have improved thermal and alkaline stability and are ideal candidates for DNA shuffling experiments to produce a robust xylanase for industrial application.

Modification of paper properties by the pretreatment of wastepaper pulp with Graphiumputredinis, Trichodermaharzianum and fusant xylanases

Graphiumputredinis, Trichodermaharzianum and fusant were used in the present study to produce extracellular xylanases, an important industrial enzyme used in pulp and paper industry produced in a minimal medium supplemented with oat spelt xylan (1%, w/v) pH 7.0 at 27+/-2 degrees C. The enzyme was purified to homogeneity by DEAE-Cellulose and Superdex 75 FPLC column, respectively. The enzyme was found to be a monomer as determined by SDS gel electrophoresis. The optimum pH and temperature for purified G. putredinis, T. harzianum and fusant xylanases were 5.0-6.0 and 50-70 degrees C, respectively. Pretreatment of paper pulp with G. putredinis, T. harzianum and fusant xylanases decreased pulp kappa number. Xylanases particularly that of fusant at 5 IU/g pulp concentration and 1.5% pulp consistency at 60 degrees C for 18 h followed by EDED process yielded good quality paper from waste paper pulp. A significant increase in pulp brightness and improvement in various pulp properties, viz. burst capacity, thickness and bulkness of the treated pulp were observed in comparison to the conventional chemical bleaching. Easy purification and high stability of these enzymes makes it amicable for industrial applications.

A novel cellulase free alkaliphilic xylanase from alkali tolerant Penicillium citrinum: production, purification and characterization

AIMS

The enzymatic hydrolysis of xylan has potential economic and environment-friendly applications. Therefore, attention is focused here on the discovery of new extremophilic xylanase in order to meet the requirements of industry.

METHODS AND RESULTS

An extracellular xylanase was purified from the culture filtrate of P. citrinum grown on wheat bran bed in solid substrate fermentation. Single step purification was achieved using hydrophobic interaction chromatography. The purified enzyme showed a single band on SDS-PAGE with an apparent molecular weight of c. 25 kDa and pI of 3.6. Stimulation of the activity by beta mercaptoethanol, dithiotheritol (DTT) and cysteine was observed. Moderately thermostable xylanase showed optimum activity at 50 degrees C at pH 8.5.

CONCLUSION

Xylanase purified from P. citrinum was alkaliphilic and moderately thermostable in nature.

SIGNIFICANCE AND IMPACT OF THE STUDY

The present work reports for the first time the purification and characterization of a novel endoglucanase free alkaliphilic xylanase from the alkali tolerant fungus Penicillium citrinum. The alkaliphilicity and moderate thermostability of this xylanase may have potential implications in paper and pulp industries.

Marine glycosyl hydrolases in the hydrolysis and synthesis of oligosaccharides

The marine ecosystem can be considered a rather unexplored source of biological material (e.g. natural substances with therapeutic activity) and can also be a surprising source of enzymes carrying new and interesting catalytic activities to be applied in biocatalysis. The use of glycosyl hydrolases from marine environments dates back to the end of the 1960s and was mainly focused on the development of sensitive and reliable hydrolytic methods for the analysis of sugar chains. As a result not all the benefits of a particular enzymatic activity have been investigated, especially regarding the transglycosylation potential of these enzymes for the synthesis of glycosidic bonds. In this review, the potential of marine sources will be demonstrated reporting on the few examples found in literature for the synthesis and hydrolysis of biologically relevant oligosaccharides catalyzed by glycosyl hydrolases of marine origin. Particular emphasis is given to the synthesis of glycosidic bonds, which is easy by the use of glycosyl hydrolases. Further aspects considered in this review are applications of these biocatalysts for vegetal waste treatment in recovering useful materials, for structural identification and for preparation of target materials from new purified polysaccharides, for the synthesis or modification of food-related compounds and for glycobiology related studies.

Bleaching of wheat straw-rich soda pulp with xylanase from a thermoalkalophilic Streptomyces cyaneus SN32

An alkalistable endoxylanase from Streptomyces cyaneus SN32 was applied in bleaching of wheat straw enriched soda pulp. The xylanase dose of 10 IUg(-1) moisture free pulp exhibited maximum bleach boosting of soda pulp (pH 9.5-10.0) optimally at 65 degrees C after 2 h of reaction time. Pre-treatment of pulp with xylanase and its subsequent treatment with 6% hypochlorite reduced the kappa number by 8.7%, enhanced the brightness index by 3.56% and improved other paper properties such as tear index and burst index. The enzymatically-prebleached pulp when treated with 10% reduced level of hypochlorite (5.4%) gave comparable brightness of resultant hand sheets to the fully bleached pulp (6% hypochlorite).

Novel cold-adaptive Penicillium strain FS010 secreting thermo-labile xylanase isolated from Yellow Sea

A novel cold-adaptive xylanolytic Penicillium strain FS010 was isolated from Yellow sea sediments. The marine fungus grew well from 4 to 20 degrees; a lower (0 degrees) or higher (37 degrees) temperature limits its growth. The strain was identified as Penicillium chrysogenum. Compared with mesophilic P. chrysogenum, the cold-adaptive fungus secreted the cold-active xylanase (XYL) showing high hydrolytic activities at low temperature (2-15 degrees) and high sensitivity to high temperature (>50 degrees). The XYL gene was isolated from the cold-adaptive P. chrysogenum FS010 and designated as xyl. The deduced amino acid sequence of the protein encoded by xyl showed high homology with the sequence of glycoside hydrolase family 10. The gene was subcloned into an expression vector pGEX-4T-1 and the encoded protein was overexpressed as a fusion protein with glutathione-S-transferase in Escherichia coli BL21. The expression product was purified and subjected to enzymatic characterization. The optimal temperature and pH for recombinant XYL was 25 degrees and 5.5, respectively. Recombinant XYL showed nearly 80% of its maximal activity at 4 degrees and was active in the pH range 3.0-9.5.

Biotechnology-a sustainable alternative for chemical industry

This review outlines the current and emerging applications of biotechnology, particularly in the production and processing of chemicals, for sustainable development. Biotechnology is "the application of scientific and engineering principles to the processing of materials by biological agents". Some of the defining technologies of modern biotechnology include genetic engineering; culture of recombinant microorganisms, cells of animals and plants; metabolic engineering; hybridoma technology; bioelectronics; nanobiotechnology; protein engineering; transgenic animals and plants; tissue and organ engineering; immunological assays; genomics and proteomics; bioseparations and bioreactor technologies. Environmental and economic benefits that biotechnology can offer in manufacturing, monitoring and waste management are highlighted. These benefits include the following: greatly reduced dependence on nonrenewable fuels and other resources; reduced potential for pollution of industrial processes and products; ability to safely destroy accumulated pollutants for remediation of the environment; improved economics of production; and sustainable production of existing and novel products.

Biological deinking of inkjet-printed paper using Vibrio alginolyticus and its enzymes

Recycling of office waste paper (photocopy, inkjet, and laser prints) is a major problem due to difficulty in removal of nonimpact ink. Biological deinking of office waste paper is reported using several microorganisms and their enzymes. We report here deinking and decolorization of the dislodged ink particles from inkjet printed paper pulp by a marine bacterium, Vibrio alginolyticus isolate no. NIO/DI/32, obtained from marine sediments. Decolorization of this pulp was achieved within 72 h by growing the bacterium in the pulp of 3-6% consistency suspended in seawater. Immobilized bacterial cells in sodium alginate beads were also able to decolorize this pulp within 72 h. The cell-free culture supernatant of the bacterium grown in nutrient broth was not effective in deinking. However, when the culture was grown in nutrient broth supplemented with starch or Tween 80, the cell-free culture supernatant could effectively deink and decolorize inkjet-printed paper pulp within 72 h at 30 degrees C. The culture supernatant of V. alginolyticus grown in the presence of starch or Tween 80 showed 49 U ml(-1) and 33 U ml(-1) amylase and lipase activities, respectively. Dialysis of these culture supernatants through 10 kDa cut-off membrane resulted in a 35-40% reduction in their efficiency in decolorizing the pulp. It appears that amylase and lipase effectively help in dislodging the ink particles from the inkjet printed-paper pulp. We hypothesize that the bacterium might be inducing the formation of low molecular weight free radicals in the culture medium, which might be responsible for decolorization of the pulp.