Properties of the Langmuir and Langmuir–Blodgett monolayers of cholesterol-cyclosporine A on water and polymer support

Morphology Observation of Two-Dimensional Monolayers of Model Proteins on Water Surface as Revealed by Dropping Method

We have investigated the morphology of two-dimensional monolayers of gramicidin-D (GD) and alamethicin (Al) formed on the water surface by the dropping method (DM) using surface tension measurement (STm), Brewster angle microscopy (BAM), and atomic force microscopy (AFM). Dynamic light scattering (DLS) revealed that GD in alcoholic solutions formed a dimeric helical structure. According to the CD and NMR spectroscopies, GD molecules existed in dimer form in methanol and lipid membrane environments. The STm results and BAM images revealed that the GD dimer monolayer was in a liquid expanded (LE) state, whereas the Al monolayer was in a liquid condensed (LC) state. The limiting molecular area (A0) was 6.2 ± 0.5 nm2 for the GD-dimer and 3.6 ± 0.5 nm2 for the Al molecule. The AFM images also showed that the molecular long axes of both the GD-dimer and Al were horizontal to the water surface. The stability of each monolayer was confirmed by the time dependence of the surface pressure (π) observed using the STm method. The DM monolayer preparation method for GD-dimer and Al peptide molecules is a useful technique for revealing how the model biological membrane's components assemble in two dimensions on the water surface.

Lage E, Casas M, Concheiro A, Alvarez-Lorenzo C. Langmuir monolayer studies of non-ionic surfactants and DOTMA for the design of ophthalmic niosomes

The worldwide increase in diabetes entails a rise in associated diseases, with diabetic retinopathy on the forefront of the ocular complications. To overcome the challenges posed by ocular barriers, self-assembled nanocarriers have gathered increasing attention in recent years, with niosomes revealing themselves to be suitable for the delivery of a variety of drugs. This study investigated the mechanical properties of Langmuir monolayers comprising cholesterol, Tween 60, and 1,2-di-O-octadecenyl-3-trimethylammonium propane (DOTMA), both individually and in binary and ternary systems. The cholesterol monolayer was characterized by an L-shaped isotherm, reflecting two surface aggregation states. Tween 60 exhibited expanded conformation and progressive aggregation, transitioning through a phase change. The addition of cholesterol to Tween 60 resulted in a subtle reduction in surface compressional modulus. The compression isotherms highlighted the stabilizing effect of cholesterol on the monolayer, affecting the film's resistance to compression. The introduction of DOTMA in Tween 60 monolayers revealed concentration-dependent effects, where the compression resistance of the film was proportional to DOTMA concentration. Ternary systems of cholesterol, DOTMA and Tween 60 exhibited unique behavior, with DOTMA enhancing film stability and cholesterol modulating this effect. Temperature and subphase ionic strength variations further exacerbated the effects of DOTMA concentration. Brewster Angle Microscopy confirmed the absence of microdomains in the compressed monolayer, supporting the hypothesis of a monolayer collapse. Overall, the research provided valuable insights into the intricate interactions and mechanical behavior of these surfactant systems and the feasibility of obtaining cationic niosome-based drug delivery.

Barbellatanic acid, a new antitrypanosomal pseudo-disesquiterpenoid isolated from Nectandra barbellata, displayed interaction with protozoan cell membrane

As part of our ongoing studies involving the discovery of new natural prototypes with antiprotozoal activity against Trypanosoma cruzi from Brazilian plant species, the chromatographic fractionation of hexane extract from leaves of Nectandra barbellata afforded one new pseudo-disesquiterpenoid, barbellatanic acid. The structure of this compound was elucidated by NMR and HR-ESIMS data analysis. Barbellatanic acid displayed a trypanocidal effect with IC50 of 13.2 μM to trypomastigotes and no toxicity against NCTC cells (CC50 > 200 μM), resulting in an SI value higher than 15.1. The investigation of the lethal mechanism of barbellatanic acid in trypomastigotes, using both fluorescence microscopy and spectrofluorimetric analysis, revealed a time-dependent permeation of the plasma membrane. Based on these results, this compound was incorporated in cellular membrane models built with lipid Langmuir monolayers. The interaction of barbellatanic acid with the models was inferred by tensiometric, rheological, spectroscopical, and morphological techniques, which showed that this compound altered the thermodynamic, viscoelastic, structural, and morphological properties of the film. Taking together, these results could be employed when this prodrug interacts with lipidic interfaces, such as protozoa membranes or liposomes for drug delivery systems.

Latest advances: Improving the anti-inflammatory and immunomodulatory properties of PEEK materials

Excellent biocompatibility, mechanical properties, chemical stability, and elastic modulus close to bone tissue make polyetheretherketone (PEEK) a promising orthopedic implant material. However, biological inertness has hindered the clinical applications of PEEK. The immune responses and inflammatory reactions after implantation would interfere with the osteogenic process. Eventually, the proliferation of fibrous tissue and the formation of fibrous capsules would result in a loose connection between PEEK and bone, leading to implantation failure. Previous studies focused on improving the osteogenic properties and antibacterial ability of PEEK with various modification techniques. However, few studies have been conducted on the immunomodulatory capacity of PEEK. New clinical applications and advances in processing technology, research, and reports on the immunomodulatory capacity of PEEK have received increasing attention in recent years. Researchers have designed numerous modification techniques, including drug delivery systems, surface chemical modifications, and surface porous treatments, to modulate the post-implantation immune response to address the regulatory factors of the mechanism. These studies provide essential ideas and technical preconditions for the development and research of the next generation of PEEK biological implant materials. This paper summarizes the mechanism by which the immune response after PEEK implantation leads to fibrous capsule formation; it also focuses on modification techniques to improve the anti-inflammatory and immunomodulatory abilities of PEEK. We also discuss the limitations of the existing modification techniques and present the corresponding future perspectives.

Effect of naproxen on the model lipid membrane formed on the water-chitosan subphase

Non steroidal anti-inflammatory drugs (NSAIDs) are those of the most common over the counter (OTC) medications widely used by millions of people every day. Unfortunately, despite their popularity those drugs can cause serious side effects in the digestive system (ulcers, bleeding, and pain). These inconveniences are caused by the changes in the structures of the outer phospholipid layers of gastric mucus and mucosa. As a result the H⁺ ions from the stomach acid can pass easily through these natural protective barriers and damage the epithelial cells which causes ulcers and bleeding. Chitosan as a polysaccharide known for its unique biocompatibility, drug delivery possibilities and wound healing effect has been chosen to examine if it can induce the reduction of undesirable effects of naproxen. This paper focuses on the interactions of the naproxen with a model biological membrane with and without the presence of chitosan. Applying the Langmuir technique coupled with the surface potential measurements and the Brewster angle microscope imaging allowed to characterize successfully examined systems in terms of the monolayer compressibility, thickness, stability, electric properties and morphology. The results proved that the presence of naproxen alters the mechanical and electrical properties of the model membrane depending on its surface pressure. Moreover, the addition of chitosan to the lipid-drug system causes significant changes in the properties of the layer, i.e. a reduction of its compressibility, thickness and morphology modification. Nevertheless, chitosan suppresses some changes induced by naproxen such as alteration of the apparent dipole moment and film stability.

Study of Interactions between Saponin Biosurfactant and Model Biological Membranes: Phospholipid Monolayers and Liposomes

The aim of this study was to determine the effect of saponins-rich plant extract on two model biological membranes: phospholipid monolayers and liposomes. The Langmuir monolayer technique was used to study the interactions of model phospholipid membranes with saponins. The π-A isotherms were determined for DPPE (1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine) monolayer with the addition of various concentrations of licorice saponins extracts and subjected to qualitative as well as quantitative analysis. Additionally, relaxation studies of the obtained monolayers were carried out and morphological changes were examined using Brewster angle microscopy. Moreover, changes in the structure of phospholipid vesicles treated with solutions of saponins-rich plant extracts were assessed using the FTIR technique. The size and zeta potential of the liposomes were estimated based on DLS methods. The obtained results indicated that the saponins interact with the phospholipid membrane formed by DPPE molecules and that the stability of the mixed DPPE/saponins monolayer strongly depends on the presence of impurities in saponins. Furthermore, it was found that the plant extract rich in saponins biosurfactant interacts mainly with the hydrophilic part of liposomes.

Characteristics of Hybrid Bioglass-Chitosan Coatings on the Plasma Activated PEEK Polymer

Polyetheretherketone (PEEK) is a biocompatible, chemically and physically stable radiolucent polymer that exhibits a similar elastic modulus to the normal human bone, making it an attractive orthopedic implant material. However, PEEK is biologically inert, preventing strong enough bonding with the surrounding bone tissue when implanted in vivo. Surface modification and composite preparation are the two main strategies for the improvement of the bioactivity of PEEK. In this study, the plasma activated PEEK surfaces with the embedded bioglass, chitosan, and bioglass-chitosan mixed layers applying from the solution dip-coating technique were investigated. The most prominent factors affecting the coating biocompatibility are strictly connected with the composition of its outer surface (its charge and functional groups), hydrophilic-hydrophobic character, wettability and surface free energy, and topography (size of pores/substructures, roughness, stiffness), as well as the personal characteristics of the patient. The obtained surfaces were examined in terms of wettability and surface-free energy changes. Additionally, FTIR (Fourier Transformation Infrared Spectrometry) and SIMS (Secondary Ion Mass Spectrometry) were applied to establish and control the coating composition. Simultaneously the structure of coatings was visualized with the aid of SEM (Scanning Electron Microscopy). Finally, the obtained systems were incubated in SBF (Simulated Body Fluid) to verify the modifications' influence on the bioactivity/biocompatibility of the PEEK surface. Different structures with variable compositions, as well as changes of the wettability, were observed depending on the applied modification. In addition, the incubation in SBF suggested that the bioglass-chitosan ratio influenced the formation of apatite-like structures on the modified PEEK surfaces.

Effect of Silica Microparticles on Interactions in Mono- and Multicomponent Membranes

Advancing our understanding of the mechanism of the interaction between inhaled pollutant microparticles and cell membrane components is useful to study the impact of fine particulate matter on human health. In this paper, we focus on the effect of cholesterol (Chol) molecules on the surface properties of a model membrane in the presence of silica microparticles (MPs). Mixed monolayers containing phospholipid-dipalmitoylphosphatidylcholine (DPPC), Chol and silica particle dispersions (MPs; 0.033% w/w, 0.33% w/w and 0.83% w/w) were formed and studied using the Langmuir monolayer technique complemented by Brewster Angle Microscopy (BAM) images. It was shown that Chol caused a condensation of the DPPC monolayer, which influenced the penetration of MPs and their interactions with the model membrane. The relaxation experiments of the lipid–MP monolayer proved that the presence of Chol molecules in the monolayer led to the formation of lipid and MP complexes. Strong interactions between Chol and MPs contributed to the formation of more stable monolayers. The presented results can be useful to better comprehend the interaction between particulate materials and the lipid components of biomembranes.

On the Preparation of Thin Films of Stearyl Methacrylate Directly Photo-polymerized at the Air-Water Interface

Characterization of bidimensional polymeric films at the air-water interface in the Langmuir trough, despite being a recurrent topic, usually refers to films of already formed polymeric materials, with very scarce reports on direct polymerization at the air-water interface. In the present work, we studied the photo-polymerization of stearyl methacrylate directly at the air-water interface under a nitrogen atmosphere, with the radical initiator solubilized in the aqueous phase. Two-dimensional (2D) polymerization was monitored by measuring the pressure-area isotherm at different irradiation times. The polymerization leads to a film with an isotherm different from that observed for the monomer, where the surface pressure is directly related to the irradiation time. The shape of this isotherm confirms the presence of a compressed liquid phase, where a higher order can be attained as a consequence of stronger packing forces involving polymer chains. The presence of inter-chain interactions allows rearrangements on the surface of the subphase, and even before the collapse a dense 2D ordering (with a solid phase-like behavior) can be observed. We present a new one-step, solvent-free procedure to obtain a photo-polymeric film directly at the air-water interface, which can be transferred to a solid surface by the Langmuir-Blodgett method, allowing film preparation of controlled thickness. Films were characterized by measuring properties such as thickness, roughness, and hydrophobicity and comparing them with films obtained from a conventional polymer. We report the differences between the interfacial behavior of amphiphilic molecules and nanomaterials such as films obtained by photo-polymerization, PSMA, directly on the air-water interface.

Application of biomolecules modification strategies on PEEK and its composites for osteogenesis and antibacterial properties

As orthopedic and dental implants, polyetheretherketone (PEEK) is expected to be a common substitute material of titanium (Ti) and its alloys due to its good biocompatibility, chemical stability, and elastic modulus close to that of bone tissue. It could avoid metal allergy and bone resorption caused by the stress shielding effect of Ti implants, widely studied in the medical field. However, the lack of biological activity is not conducive to the clinical application of PEEK implants. Therefore, the surface modification of PEEK has increasingly become one of the research hotspots. Researchers have explored various biomolecules modification methods to effectively enhance the osteogenic and antibacterial activities of PEEK and its composites. Therefore, this review mainly summarizes the recent research of PEEK modified by biomolecules and discusses the further research directions to promote the clinical transformation of PEEK implants.

Interaction of a Phospholipid and a Coagulating Protein: Potential Candidate for Bioelectronic Applications

In the present communication, we have investigated the interaction between a biomembrane component 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and a coagulating protein protamine sulfate (PS) using the Langmuir-Blodgett (LB) technique. The π-A isotherm, π-t characteristics, and analysis of isotherm curves suggested that PS strongly interacted with DOPC, affecting the fluidity of the DOPC layer. Electrical characterization indicates that PS as well as the PS-DOPC film showed resistive switching behavior suitable for Write Once Read Many (WORM) memory application. Trap-controlled space charge-limited conduction (SCLC) was the key mechanism behind such observed switching. The presence of DOPC affected the SCLC process, leading to lowering of threshold voltage (V _Th), which is advantageous in terms of lower power consumption.

Gas-Responsive and Self-Powered Visual Composite Langmuir-Blodgett Films for Ultrathin Gas Sensors

The complex and variable environments are challenging the development of related detection and analysis. Ammonia (NH₃) and hydrogen chloride (HCl) gases are both commonly used in industry, but they are considered to be toxic and corrosive substances that can threaten human health and the environment. Therefore, it is necessary here to develop a convenient, sensitive, and reliable sensor device for acid-alkali gas detection. Herein, we propose the synthesis strategy of an ultrathin film gas sensor based on the pH-responsive, self-powered, and visible composite Langmuir-Blodgett (LB) films. In our work, the LB films with nanometric thicknesses are obtained based on the sensitive materials of two novel carbazole structural sensitizers (abbreviated as CS-35 and CS-37) and several dye molecules. The composite LB films are formed with Carbazole samples and dye molecules through hydrogen bonding, π-π stacking, synergistic electrostatic interactions, and hydrophobic interactions, existing as J-aggregate or H-aggregate. The formation of high-quality and uniform Langmuir films is confirmed with transmission electron microscope (TEM), UV-vis spectrum, atomic force microscopy (AFM), and other measurements. In addition, based on the simple protonation and deprotonation, the prepared LB films can be assembled into a visual sensor for the response of pH gases. The response is confirmed by the study of ultraviolet spectroscopy and electrical output in vertical contact separation mode, which potentially unlocks a sustainable future for the application of ultrathin self-powered gas sensors.

The Interaction of Gb3 Glycosphingolipids with ld and lo Phase Lipids in Lipid Monolayers Is a Function of Their Fatty Acids

The glycosphingolipid Gb₃ is a specific receptor of the bacterial Shiga toxin (STx). Binding of STx to Gb₃ is a prerequisite for its internalization into the host cells, and the ceramide's fatty acid of Gb₃ has been shown to influence STx binding. In in vitro studies on liquid ordered (l_o)/liquid disordered (l_d) coexisting artificial membranes, Shiga toxin B (STxB) binds solely to l_o domains, thus harboring Gb₃ concomitant with an observed lipid redistribution process. These findings raise the question of how the molecular structure of the fatty acid of Gb₃ influences the interaction of Gb₃ with the different lipids preferentially either found in the l_o phase, namely, sphingomyelin and cholesterol, or in the l_d phase. We addressed this question by using a series of synthetically available and unlabeled Gb₃ glycosphingolipids carrying different long chain C₂₄ fatty acids (saturated, monounsaturated, and α-hydroxylated). In conjunction with surface tension experiments on Langmuir monolayers, we quantified the excess of free energy of mixing of the different Gb₃ species in monolayers composed of either sphingomyelin or cholesterol or composed of a fluid phase lipid (DOPC). From a calculation of the total free energy of mixing, we conclude that mixing of the saturated Gb₃ species with the l_d lipid DOPC is energetically less favorable than all other combinations, while the unsaturated species mix equally well with the l_o phase lipids sphingomyelin and cholesterol and the l_d phase lipid DOPC. Furthermore, we found that STxB partially penetrates in mixed lipid monolayers (DOPC/sphingomyelin/cholesterol) containing the Gb₃ sphingolipid with a saturated or a monounsaturated C₂₄ fatty acid. The maximum insertion pressure, as a measure for protein insertion, is >30 mN/m for both Gb₃ molecules and is not significantly different for the two Gb₃ species.

The role of structural order in heterogeneous ice nucleation

The freezing of water into ice is a key process that is still not fully understood. It generally requires an impurity of some description to initiate the heterogeneous nucleation of the ice crystals. The molecular structure, as well as the extent of structural order within the impurity in question, both play an essential role in determining its effectiveness. However, disentangling these two contributions is a challenge for both experiments and simulations. In this work, we have systematically investigated the ice-nucleating ability of the very same compound, cholesterol, from the crystalline (and thus ordered) form to disordered self-assembled monolayers. Leveraging a combination of experiments and simulations, we identify a “sweet spot” in terms of the surface coverage of the monolayers, whereby cholesterol maximises its ability to nucleate ice (which remains inferior to that of crystalline cholesterol) by enhancing the structural order of the interfacial water molecules. These findings have practical implications for the rational design of synthetic ice-nucleating agents.

The freezing of water into ice is still not fully understood. Here, we investigate the role of structural disorder within the biologically relevant impurities that facilitate this fundamental phase transition.

Wettability and Stability of Naproxen, Ibuprofen and/or Cyclosporine A/Silica Delivery Systems

The characteristics of the wetting process of the porous surface of silica gel when penetrated by base liquids (water and n-octane), ethanol and stable drug systems (naproxen, ibuprofen and cyclosporine A), as biologically active substances in two ethanol concentrations, were determined by the wetting rate vs. time. The tests were performed for contacted and non-contacted plates with the vapours of the wetting liquid. Thin-layer liquid chromatography was used to determine the penetration rate of the SiO2-coated plates, taking into account the linear dependence consistent with the Washburn equation. Additionally, the changes in the adhesive tension ΔG were determined for the tested drugs. Drug stability tests were conducted using the dynamic light scattering technique and microelectrophoresis. The penetration time of the plate depends on the properties and structure of the wetting liquid droplets. The types of interactions (dispersive, electrostatic and hydrogen bonding) formed between the silanol surface groups of the silica gel and the groups contained in the adsorbate particles are also very important factors. The greater the impact force, the slower the wetting process due to the strong penetration of the liquid into the pores of the substrate. The characteristics of the drug wetting/stability process may contribute to the development of their new forms, creating delivery systems with greater efficiency and lower side effects.

Monolayers of Cholesterol and Cholesteryl Stearate at the Water/Vapor Interface: A Physico-Chemical Study of Components of the Meibum Layer

Langmuir monolayers containing different amounts of cholesterol and cholesteryl stearate were studied at two different temperatures (24 °C and 35 °C). The main goal was to contribute towards the understanding of how the variations in the chemical composition may affect the physico-chemical properties of these specific lipid monolayers. The model mixture was chosen considering that cholesteryl esters are present in cell membranes and some other biological systems, including human tear lipids. Therefore, an investigation into the effect of the lipid monolayer composition on their interfacial properties may elucidate some of the fundamental reasons for the deficiencies in cell membranes and tear film functioning in vivo. The experimental results have shown that the molar ratio of the mixture plays a crucial role in the modulation of the Langmuir film properties. The condensing effects of the cholesterol and the interactions between the lipids in the monolayer were the main factors altering the monolayer response to dilatational deformation. The modification of the mixture compositions leads to significant changes in the Langmuir films and the mechanical performance, altering the ability of the monolayer to reduce the surface tension and the viscoelastic properties of the monolayers. This suggests that subtle modifications of the biomembrane composition may significantly alter its physiological function.

Comparative studies of nitrogen plasma and argon plasma treatment on the strength of PBO fibre reinforced high-temperature resistant thermoplastic composite

The study involves the processing of a novel poly [1, 4-phenylene-cis-benzobisoxazole] (PBO) fibre reinforced high-temperature thermoplastic composite with polyaryletherketone (PAEK) as the matrix. The PBO fibre and the PAEK film surface was modified using the method of argon and nitrogen plasma treatment. The investigation primarily focuses on evaluating the tensile properties of the fabricated laminates and correlating it with the effect of plasma treatment, surface characteristics, and its fracture surface. A 5% decrease in tensile strength was observed post argon plasma treatment while a 27% increase in strength was observed post nitrogen plasma treatment. The morphology of the failure surface was investigated by scanning electron microscopy and an interfacial failure was observed. Furthermore, the effect of plasma on the wettability of PBO fibres and PAEK film surface was confirmed by the Dynamic Contact Angle analysis and sessile drop method respectively. FTIR spectral analysis was done to investigate the effect of plasma treatment on the chemical structure on the surface. The results of the wettability study showed that the argon plasma treatment of the fibre surface increased its hydrophobicity while nitrogen plasma treatment resulted in the reduction of contact angle.

Cyclosporine CsA—The Physicochemical Characterization of Liposomal and Colloidal Systems

This paper presents an overview of the possibilities of testing various cyclosporine (CsA) formulations with an emphasis on parameters that may be key to improving the stability and biocompatibility. The feasibility of CsA colloidal systems for oral (injection) administration were investigated using different techniques and compared with similar investigations of other researchers. The chosen CsA systems were developed using dipalmitoylphosphocholine (DPPC) and/or cholesterol as a lipid matrix, stabilized with ethanol, with soybean oil or n-tetradecane as oil phase in emulsions, under natural pH, room and physiological temperature. Their integrity was found to be strictly dependent on the stabilizers. The highest CsA penetrability with the system containing phospholipid in the context of its interactions with lipid membranes was shown. Also, the bioavailability of CsA can be enhanced with the biopolymer antibacterial chitosan. This mini-review suggests the suitability of liposome/microemulsion as promising vehicles for CsA delivery. The most hopeful proved to be formulation with the smaller particle size facilitating absorption, but when safety is assessed, relying on just the particle size cannot be the only criteria. Reassumed, the CsA formulation stability known on the basis of the size and zeta potential measurements guarantees a decrease of the individual variations in the drug bioavailability, toxicity and minimizes rejection.

Combined Effect of Nitrofurantoin and Plant Surfactant on Bacteria Phospholipid Membrane

Due to the increasing use of antibiotics, measures are being taken to improve their removal from the natural environment. The support of biodegradation with natural surfactants that increase the bioavailability of impurities for microorganisms that degrade them, raises questions about their effect on bacterial cells. In this paper we present analysis of the interaction of nitrofurantoin (NFT) and saponins from the Saponaria officinalis on the environmental bacteria membrane and the model phospholipid membrane mimicking it. A wide perspective of the process is provided with the Langmuir monolayer technique and membrane permeability test with bacteria. The obtained results showed that above critical micelle concentration (CMC), saponin molecules are incorporated into the POPE monolayer, but the NFT impact was ambiguous. What is more, differences in membrane permeability between the cells exposed to NFT in comparison to that of the non-exposed cells were observed above 1.0 CMC for Achromobacter sp. KW1 or above 0.5 CMC for Pseudomonas sp. MChB. In both cases, NFT presence lowered the membrane permeability. Moreover, the Congo red adhesion to the cell membrane also decreased in the presence of a high concentration of surfactants and NFT. The results suggest that saponins are incorporated into the bacteria membrane, but their sugar hydrophilic part remains outside, which modifies the adsorption properties of the cell surface as well as the membrane permeability.

Dexibuprofen Biodegradable Nanoparticles: One Step Closer towards a Better Ocular Interaction Study

Ocular inflammation is one of the most prevalent diseases in ophthalmology, which can affect various parts of the eye or the surrounding tissues. Non-steroidal anti-inflammatory drugs (NSAIDs) such as ibuprofen, are commonly used to treat ocular inflammation in the form of eye-drops. However, their bioavailability in ocular tissues is very low (less than 5%). Therefore, drug delivery systems such as biodegradable polymeric PLGA nanoparticles constitute a suitable alternative to topical eye administration, as they can improve ocular bioavailability and simultaneously reduce drug induced side effects. Moreover, their prolonged drug release can enhance patient treatment adherence as they require fewer administrations. Therefore, several formulations of PLGA based nanoparticles encapsulating dexibuprofen (active enantiomer of Ibuprofen) were prepared using the solvent displacement method employing different surfactants. The formulations have been characterized and their interactions with a customized lipid corneal membrane model were studied. Ex vivo permeation through ocular tissues and in vivo anti-inflammatory efficacy have also been studied.

Self-Assembled Polymeric Membranes and Nanoassemblies on Surfaces: Preparation, Characterization, and Current Applications

Biomembranes play a crucial role in a multitude of biological processes, where high selectivity and efficiency are key points in the reaction course. The outstanding performance of biological membranes is based on the coupling between the membrane and biomolecules, such as membrane proteins. Polymer-based membranes and assemblies represent a great alternative to lipid ones, as their presence not only dramatically increases the mechanical stability of such systems, but also opens the scope to a broad range of chemical functionalities, which can be fine-tuned to selectively combine with a specific biomolecule. Tethering the membranes or nanoassemblies on a solid support opens the way to a class of functional surfaces finding application as sensors, biocomputing systems, molecular recognition, and filtration membranes. Herein, the design, physical assembly, and biomolecule attachment/insertion on/within solid-supported polymeric membranes and nanoassemblies are presented in detail with relevant examples. Furthermore, the models and applications for these materials are highlighted with the recent advances in each field.

Wetting Properties of Polyetheretherketone Plasma Activated and Biocoated Surfaces

Polyetheretherketone (PEEK) biomaterial is a polymer which has been widely used since the early 90s as a material for human bone implant preparations. Nowadays it is increasingly used due to its high biocompatibility and easily modeling, as well as better mechanical properties and price compared to counterparts made of titanium or platinum alloys. In this paper, air low-temperature and pressure plasma was used to enhance PEEK adhesive properties as well as surface sterilization. On the activated polymeric carrier, biologically-active substances have been deposited with the Langmuir-Blodgett technique. Thereafter, the surface was characterized using optical profilometry, and wettability was examined by contact angle measuring. Next, the contact angle hysteresis (CAH) model was used to calculate the surface free energy of the modified surface of PEEK. The variations of wettability and surface free energy were observed depending on the deposited monolayer type and its components.