Selection and characterization of a newly isolated thermotolerant Pichia kudriavzevii strain for ethanol production at high temperature from cassava starch hydrolysate

Physiological responses contributing to multiple stress tolerance in Pichia kudriavzevii with potential enhancement for ethanol fermentation

Economically feasible ethanol production requires efficient hydrolysis of lignocellulosic biomass and high-temperature processing to enable simultaneous saccharification and fermentation. During the lignocellulolysic hydrolysate, the yeast must encounter with a multiple of inhibitors such as heat and furfural. To solve this problem, a potential fermentative yeast strain that tolerated simultaneous multistress and enhance ethanol concentration was investigated. Twenty yeast isolates were classified into two major yeast species, namely Pichia kudriavzevii (twelve isolates) and Candida tropicalis (eight isolates). All P. kudriavzevii isolates were able to grow at high temperature (45 °C) and exhibited stress tolerance toward furfural. Among P. kudriavzevii isolates, NUCG-S3 presented the highest specific growth rate under each stress condition of heat and furfural, and multistress. Morphological changes in P. kudriavzevii isolates (NUCG-S2, NUCG-S3, NUKL-P1, NUKL-P3, and NUOR-J1) showed alteration in mean cell length and width compared to the non-stress condition. Ethanol production by glucose was also determined. The yeast strain, NUCG-S3, gave the highest ethanol concentrations at 99.46 ± 0.82, 62.23 ± 0.96, and 65.80 ± 0.62 g/l (P < 0.05) under temperature of 30 °C, 40 °C, and 42 °C, respectively. The tolerant isolated yeast NUCG-S3 achieved ethanol production of 53.58 ± 3.36 and 48.06 ± 3.31 g/l (P < 0.05) in the presence of 15 mM furfural and multistress (42 °C with 15 mM furfural), respectively. Based on the results of the present study, the novel thermos and furfural-tolerant yeast strain P. kudriavzevii NUCG-S3 showed promise as a highly proficient yeast for high-temperature ethanol fermentation.

Kinetic Evaluation of the Production of Mead from a Non-Saccharomyces Strain

There is a growing market for craft beverages with unique flavors. This study aimed to obtain a palate-pleasing mead derived from Pichia kudriavzevii 4A as a monoculture. Different culture media were evaluated to compare the fermentation kinetics and final products. The crucial factors in the medium were ~200 mg L-1 of yeast assimilable nitrogen and a pH of 3.5-5.0. A panel of judges favored the mead derived from Pichia kudriavzevii 4A (fermented in a medium with honey initially at 23 °Bx) over a commercial sample produced from Saccharomyces cerevisiae, considering its appearance, fruity and floral flavors (provided by esters, aldehydes, and higher alcohols), and balance between sweetness (given by the 82.91 g L-1 of residual sugars) and alcohol. The present mead had an 8.57% v/v ethanol concentration, was elaborated in 28 days, and reached a maximum biomass growth (2.40 g L-1) on the same fermentation day (6) that the minimum level of pH was reached. The biomass growth yield peaked at 24 and 48 h (~0.049 g g-1), while the ethanol yield peaked at 24 h (1.525 ± 0.332 g g-1), in both cases declining thereafter. The Gompertz model adequately describes the kinetics of sugar consumption and the generation of yeast biomass and ethanol. Pathogenic microorganisms, methanol, lead, and arsenic were absent in the mead. Thus, Pichia kudriavzevii 4A produced a safe and quality mead with probable consumer acceptance.

Molecular basis and functional development of membrane-based microbial metabolism

My research interest has so far been focused on metabolisms related to the "membrane" of microorganisms, such as the respiratory chain, membrane proteins, sugar uptake, membrane stress and cell lysis, and fermentation. These basic metabolisms are important for the growth and survival of cell, and their knowledge can be used for efficient production of useful materials. Notable achievements in research on metabolisms are elucidation of the structure and function of membrane-bound glucose dehydrogenase as a primary enzyme in the respiratory chain, elucidation of ingenious expression regulation of several operons or by divergent promoters, elucidation of stress-induced programed-cell lysis and its requirement for survival during a long-term stationary phase, elucidation of molecular mechanism of survival at a critical high temperature, elucidation of thermal adaptation and its limit, isolation of thermotolerant fermenting yeast strains, and development of high-temperature fermentation and green energy production technologies. These achievements are described together in this review.

Metabolomics Study Reveals Biomarker L-Proline as Potential Stress-Protectant Compound for High-Temperature Bioethanol Fermentation by Yeast Pichia kudriavzevii 1P4

High-temperature ethanol fermentation (> 40 °C) can be applied as effective bioprocess technology to increase ethanol production. Thermotolerant yeast Pichia kudriavzevii 1P4 showed the ability to produce ethanol at optimum 37 °C. Thus, this study evaluated the ethanol productivity of isolate 1P4 at high-temperature ethanol fermentation (42 and 45 °C) and the identification of metabolite biomarkers using untargeted metabolomics with liquid chromatography-tandem mass spectrometry (LC-MS/MS). 1P4 showed tolerance to temperature stress up to 45 °C and thus relevant for high-temperature fermentation. As measured by gas chromatography (GC), bioethanol production of 1P4 at 30, 37, 42, and 45 °C was 5.8 g/l, 7.1 g/l, 5.1 g/l, and 2.8 g/l, respectively. The classification of biomarker compounds was based on orthogonal projection analysis to latent structure discriminant analysis (OPLS-DA), resulting in L-proline being a suspected biomarker compound for isolate 1P4 tolerance against high-temperature stress. Indeed, supplementation of L-proline on fermentation medium supported the growth of 1P4 at high temperatures (> 40 °C) than without L-proline. The bioethanol production with the addition of the L-proline resulted in the highest ethanol concentration (7.15 g/l) at 42 °C. Supplementation of L-proline as a stress-protective compound increased ethanol productivity at high-temperature fermentation of 42 and 45 °C by 36.35% and 83.33%, respectively, compared without the addition of L-proline. Preliminary interpretation of these results indicates that bioprocess engineering through supplementation of stress-protective compounds L-proline increases the fermentation efficiency of isolate 1P4 at higher temperatures (42 °C and 45 °C).

Non-conventional yeast strains: Unexploited resources for effective commercialization of second generation bioethanol

The conventional yeast (Saccharomyces cerevisiae) is the most studied yeast and has been used in many important industrial productions, especially in bioethanol production from first generation feedstock (sugar and starchy biomass). However, for reduced cost and to avoid competition with food, second generation bioethanol, which is produced from lignocellulosic feedstock, is now being investigated. Production of second generation bioethanol involves pre-treatment and hydrolysis of lignocellulosic biomass to sugar monomers containing, amongst others, d-glucose and D-xylose. Intrinsically, S. cerevisiae strains lack the ability to ferment pentose sugars and genetic engineering of S. cerevisiae to inculcate the ability to ferment pentose sugars is ongoing to develop recombinant strains with the required stability and robustness for commercial second generation bioethanol production. Furthermore, pre-treatment of these lignocellulosic wastes leads to the release of inhibitory compounds which adversely affect the growth and fermentation by S. cerevisae. S. cerevisiae also lacks the ability to grow at high temperatures which favour Simultaneous Saccharification and Fermentation of substrates to bioethanol. There is, therefore, a need for robust yeast species which can co-ferment hexose and pentose sugars and can tolerate high temperatures and the inhibitory substances produced during pre-treatment and hydrolysis of lignocellulosic materials. Non-conventional yeast strains are potential solutions to these problems due to their abilities to ferment both hexose and pentose sugars, and tolerate high temperature and stress conditions encountered during ethanol production from lignocellulosic hydrolysate. This review highlights the limitations of the conventional yeast species and the potentials of non-conventional yeast strains in commercialization of second generation bioethanol.

Advances in the Application of the Non-Conventional Yeast Pichia kudriavzevii in Food and Biotechnology Industries

Pichia kudriavzevii is an emerging non-conventional yeast which has attracted increased attention for its application in food and biotechnology areas. It is widespread in various habitats and often occurs in the spontaneous fermentation process of traditional fermented foods and beverages. The contributions of P. kudriavzevii in degrading organic acid, releasing various hydrolase and flavor compounds, and displaying probiotic properties make it a promising starter culture in the food and feed industry. Moreover, its inherent characteristics, including high tolerance to extreme pH, high temperature, hyperosmotic stress and fermentation inhibitors, allow it the potential to address technical challenges in industrial applications. With the development of advanced genetic engineering tools and system biology techniques, P. kudriavzevii is becoming one of the most promising non-conventional yeasts. This paper systematically reviews the recent progress in the application of P. kudriavzevii to food fermentation, the feed industry, chemical biosynthesis, biocontrol and environmental engineering. In addition, safety issues and current challenges to its use are discussed.

Evaluation of thermotolerant and ethanol-tolerant Saccharomyces cerevisiae as an alternative strain for bioethanol production from industrial feedstocks

Despite the fact that yeast Saccharomyces cerevisiae is by far the most commonly used in ethanol fermentation, few have been reported to be resistant to high ethanol concentrations at high temperatures. Hence, in this study, 150 S. cerevisiae strains from the Thailand Bioresource Research Center (TBRC) were screened for ethanol production based on their glucose utilization capability at high temperatures. Four strains, TBRC 12149, 12150, 12151, and 12153, exhibited the most outstanding ethanol production at high temperatures in shaking-flask culture. Among these, strain TBRC 12151 demonstrated a high ethanol tolerance of up to 12% at 40 °C. Compared to industrial and laboratory strains, TBRC 12149 displayed strong sucrose fermentation capacity whereas TBRC 12153 and 12151, respectively, showed the greatest ethanol production from molasses and cassava starch hydrolysate at high temperatures in shaking-flask conditions. In 5-L batch fermentation, similarly to both industrial strains, strain TBRC 12153 yielded an ethanol concentration of 66.5 g L-1 (58.4% theoretical yield) from molasses after 72 h at 40 °C. In contrast, strain TBRC12151 outperformed other industrial strains in cell growth and ethanol production from cassava starch hydrolysis at 40 °C with an ethanol production of 65 g L-1 (77.7% theoretical yield) after 72 h. Thus, the thermotolerant and ethanol-tolerant S. cerevisiae TBRC 12151 displayed great potential and possible uses as an alternative strain for industrial ethanol fermentation using cassava starch hydrolysate.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-022-03436-4.

Investigation of stress tolerance of Pichia kudriavzevii for high gravity bioethanol production from steam-exploded wheat straw hydrolysate

This study investigated a newly isolated thermotolerant strain of Pichia kudriavzevii with respect to its stress tolerance and fermentation performance. Response surface methodology was applied to evaluate the combined effects of furfural, osmotic and thermal stress on ethanol yield. The proposed model shows that P. kudriavzevii has a natural resistance against multiple stress factors. Further evolutionary adaptation of the isolated strain in lignocellulosic hydrolysates improved the ethanol yield by ≥ 24 %. The adapted strain HYPK213_ELA was able to produce ethanol from wheat straw hydrolysates at a high solid loading of 37 %ww-1 at 40 °C and anaerobic conditions. The highest ethanol concentration of 56.8 ± 1.0 gL-1 was reached at 40°C with an inoculum size of 2.5 × 106cellsmL-1. The results show that Pichia kudriavzevii has the potential to enable high gravity bioethanol production under conditions where most yeast strains are unable to grow.

Effects of rumen-native microbial feed supplementation on milk yield, composition, and feed efficiency in lactating dairy cows

The objective of this study was to evaluate the effects of two rumen-native microbial feed supplements (MFS) on milk production, milk composition, and feed efficiency. A total of 90 multiparous cows between 40 and 60 d in milk were enrolled in a randomized block design study. Within each block (baseline milk yield), cows were randomly assigned to: control (no microbial feed supplementation), MFS1 (0.33 g/kg total mixed ration [TMR] of an MFS containing a minimum of Clostridium beijerinckii at 2 × 106 CFU/g and Pichia kudriavzevii at 2 × 107 CFU/g), or MFS2 (0.33 g/kg TMR of a MFS containing a minimum of C. beijerinckii at 2 × 106 CFU/g, P. kudriavzevii at 2 × 107 CFU/g, Ruminococcus bovis at 2 × 107 CFU/g, and Butyrivibrio fibrisolvens at 2 × 107 CFU/g). Cows were housed in a single group and fed the study diets ad libitum for 270 d. Individual milk yield was recorded using electronic milk meters, and milk fat and protein were measured using optical in-line analyzers at each of two daily milkings. Treatment and treatment by time effects were assessed through multiple linear regression analyses. Treatment effects were observed for milk and energy-corrected milk (ECM) yields, milk fat and protein yields and concentrations, dry matter intake (DMI), and feed efficiency; those effects were conditional to time for milk yield, DMI, and feed efficiency. Overall, milk, ECM, fat, and protein yields were higher for MFS2 compared with control cows (+3.0, 3.7, 0.12, and 0.12 kg/d, respectively). Compared with MFS1, milk yield was higher and protein yield tended to be higher for MFS2 cows (+2.9 and 0.09 kg/d, respectively). In contrast, MFS1 cows produced 0.17 and 0.08 units of percentage per day more fat and protein than MFS2 cows, and 0.07 units of percentage per day more protein than control cows. Dry matter intake and feed efficiency were higher for MFS2 cows compared with MFS1 cows (+1.3 kg/d and 0.06, respectively), and feed efficiency was higher for MFS2 cows compared with control cows (+0.04). Where observed, treatment by time effects suggest that the effects of MFS2 were more evident as time progressed after supplementation was initiated. No effects of microbial supplementation were observed on body weight, body condition score, somatic cell count, or clinical mastitis case incidence. In conclusion, the supplementation of MFS2 effectively improved economically important outcomes such as milk yield, solids, and feed efficiency.

High-temperature ethanol fermentation from pineapple waste hydrolysate and gene expression analysis of thermotolerant yeast Saccharomyces cerevisiae

High-temperature ethanol fermentation by thermotolerant yeast is considered a promising technology for ethanol production, especially in tropical and subtropical regions. In this study, optimization conditions for high-temperature ethanol fermentation of pineapple waste hydrolysate (PWH) using a newly isolated thermotolerant yeast, Saccharomyces cerevisiae HG1.1, and the expression of genes during ethanol fermentation at 40 °C were carried out. Three independent variables, including cell concentration, pH, and yeast extract, positively affected ethanol production from PWH at 40 °C. The optimum levels of these significant factors evaluated using response surface methodology (RSM) based on central composite design (CCD) were a cell concentration of 8.0 × 10⁷ cells/mL, a pH of 5.5, and a yeast extract concentration of 4.95 g/L, yielding a maximum ethanol concentration of 36.85 g/L and productivity of 3.07 g/L. Gene expression analysis during high-temperature ethanol fermentation using RT-qPCR revealed that the acquisition of thermotolerance ability and ethanol fermentation efficiency of S. cerevisiae HG1.1 are associated with genes responsible for growth and ethanol stress, oxidative stress, acetic acid stress, DNA repair, the pyruvate-to-tricarboxylic acid (TCA) pathway, and the pyruvate-to-ethanol pathway.

A High-Throughput Absolute Abundance Quantification Method for the Characterisation of Daqu Core Fungal Communities

An inherent issue in high-throughput sequencing applications is that they provide compositional data for relative abundance. This often obscures the true biomass and potential functions of fungi in the community. Therefore, we presented a high-throughput absolute quantification (HAQ) method to quantitatively estimate the fungal abundance in Daqu. In this study, five internal standard plasmids (ISPs) were designed for the fungal ITS2 subregion with high length variations. Five ISPs were then utilised to establish standard curves with a quantitative concentration range of 103–107 cells/g, and this was used to quantify the core fungi, including Basidiomycota, Ascomycota, and Mucoromycota. Using three types of mature Daqu from different regions, we demonstrated that the HAQ method yielded community profiles substantially different from those derived using relative abundances. Then, the HAQ method was applied to the Daqu during fermentation. The initial formation of the Daqu surface occurred in the fourth stage, which was mainly driven by moisture. The key fungi that caused the initial formation of the Daqu surface included Hyphopichia burtonii, Saccharomycopsis fibuligera, and Pichia kudriavzevii. The initial formation of the Daqu core occurred in the fifth stage, which was mainly affected by moisture and reducing the sugar content. The key fungi that cause the initial formation of the Daqu core included S. fibuligera and Paecilomyces verrucosus. We conclude that the HAQ method, when applied to ITS2 gene fungal community profiling, is quantitative and that its use will greatly improve our understanding of the fungal ecosystem in Daqu.

Curdlan production from cassava starch hydrolysates by Agrobacterium sp. DH-2

Curdlan is an edible microbial polysaccharide and can be used in food, biomedical and biomaterial fields. To reduce the cost of curdlan production, this study investigated the suitability of cassava starch hydrolysates as carbon source for curdlan production. Cassava starch was hydrolyzed into maltose syrup using β-amylase and pullulanase at various enzyme dosages, temperature, time and addition order of two enzymes. The maltose yield of 53.17% was achieved at starch loading 30% by simultaneous addition β-amylase 210 U/g starch and pullulanase 3 U/g starch at 60 °C for 9 h. Cassava starch hydrolysates were used as carbon source for curdlan production by Agrobacterium sp. DH-2. The curdlan production reached 28.4 g/L with the yield of 0.79 g/g consumed sugar and molecular weight of 1.26 × 10⁶ Da at 96 h with cassava starch hydrolysate at 90 g/L initial sugar concentration. Curdlan produced from cassava starch hydrolysates was characterized using FT-IR spectra and thermo gravimetric analysis. This work indicated that cassava starch was a potential renewable feedstock for curdlan production.

Sequential Production of ᴅ-xylonate and Ethanol from Non-Detoxified Corncob at Low-pH by Pichia kudriavzevii via a Two-Stage Fermentation Strategy

Improving the comprehensive utilization of sugars in lignocellulosic biomass is a major challenge for enhancing the economic viability of lignocellulose biorefinement. A robust yeast Pichia kudriavzevii N-X showed excellent performance in ethanol production under high temperature and low pH conditions and was engineered for ᴅ-xylonate production without xylitol generation. The recombinant strain P. kudriavzevii N-X/S1 was employed for sequential production of ᴅ-xylonate and ethanol from ᴅ-xylose, feeding on ᴅ-glucose without pH control in a two-stage strategy of aerobic and shifting micro-aerobic fermentation. Acid-pretreated corncob without detoxification and filtration was used for ᴅ-xylonate production, then simultaneous saccharification and ethanol fermentation was performed with cellulase added at pH 4.0 and at 40 °C. By this strategy, 33.5 g/L ᴅ-xylonate and 20.8 g/L ethanol were produced at yields of 1.10 g/g ᴅ-xylose and 84.3% of theoretical value, respectively. We propose a promising approach for the sequential production of ᴅ-xylonate and ethanol from non-detoxified corncob using a single microorganism.

Salt stress improves thermotolerance and high-temperature bioethanol production of multi-stress-tolerant Pichia kudriavzevii by stimulating intracellular metabolism and inhibiting oxidative damage

BACKGROUND

High-temperature bioethanol production benefits from yeast thermotolerance. Salt stress could induce obvious cross-protection against heat stress of Pichia kudriavzevii, contributing to the improvement of its thermotolerance and bioethanol fermentation. However, the underlying mechanisms of the cross-protection remain poorly understood.

RESULTS

Salt stress showed obvious cross-protection for thermotolerance and high-temperature ethanol production of P. kudriavzevii observed by biomass, cell morphology and bioethanol production capacity. The biomass and ethanol production of P. kudriavzevii at 45 °C were, respectively, improved by 2.6 and 3.9 times by 300 mmol/L NaCl. Metabolic network map showed that salt stress obviously improved the key enzymes and intermediates in carbohydrate metabolism, contributing to the synthesis of bioethanol, ATP, amino acids, nucleotides, and unsaturated fatty acids, as well as subsequent intracellular metabolisms. The increasing trehalose, glycerol, HSPs, and ergosterol helped maintain the normal function of cell components. Heat stress induced serious oxidative stress that the ROS-positive cell rate and dead cell rate, respectively, rose from 0.5% and 2.4% to 28.2% and 69.2%, with the incubation temperature increasing from 30 to 45 °C. The heat-induced ROS outburst, oxidative damage, and cell death were obviously inhibited by salt stress, especially the dead cell rate which fell to only 20.3% at 300 mmol/L NaCl. The inhibiting oxidative damage mainly resulted from the abundant synthesis of GSH and GST, which, respectively, increased by 4.8 and 76.1 times after addition of 300 mmol/L NaCl. The improved bioethanol production was not only due to the improved thermotolerance, but resulted from the up-regulated alcohol dehydrogenases and down-regulated aldehyde dehydrogenases by salt stress.

CONCLUSION

The results provide a first insight into the mechanisms of the improved thermotolerance and high-temperature bioethanol production of P. kudriavzevii by salt stress, and provide important information to construct genetic engineering yeasts for high-temperature bioethanol production.

Bioprospecting thermotolerant yeasts from distillery effluent and molasses for high-temperature ethanol production

AIMS

Isolation, characterization and assessment of inhibitor tolerance of thermotolerant yeasts associated with distillery effluent and molasses, and their use in high-temperature ethanol production from alkali-treated rice straw.

METHODS AND RESULTS

A total of 92 thermotolerant yeasts were isolated from seven different distillery effluent and molasses samples. Based on MSP-PCR, 34 yeasts were selected and identified by sequencing the D1/D2 domain of LSU rDNA. These yeasts belonged to eight genera and nine different species. We assessed the inhibitor tolerance of these 34 well-characterized yeasts against various pre-treatment-generated inhibitors (furfural, 5-hydroxymethyl furfural and acetic acid) and also evaluated their ethanol yields at 40, 45 and 50℃. Among selected strains, Pichia kudriavzevii DSA3.2 exhibited the highest ethanol production (24.5 g l^-1 ) with an efficiency of 95.7% at 40℃ using 5% glucose. At 45℃, P. kudriavzevii DSA3.2 and Kluyveromyces marxianus MSS6.3 yielded maximum ethanol titres; 22.3 and 23 g l^-1 with 87.4% and 90% efficiency, respectively. While using alkali-treated RS at 45℃, K. marxianus MSS6.3 produced 10.5 g l^-1 of ethanol with 84.5% fermentation efficiency via separate hydrolysis and fermentation, and 10.9 g l^-1 of ethanol with 85% efficiency via simultaneous saccharification and fermentation. Pichia kudriavzevii DSA3.2, DSA3.1 and K. marxianus MSS6.3 also exhibited significant tolerance against multiple inhibitors.

CONCLUSIONS

Yeast isolates P. kudriavzevii DSA3.2 and K. marxianus MSS6.3 exhibited significant inhibitor tolerance and proved to be suitable for high-temperature ethanol fermentation. After additional optimization and scale-up experiments, these isolates can be exemplary candidates for industrial-scale ethanol production from lignocellulosic biomass.

SIGNIFICANCE AND IMPACT OF THE STUDY

Our study recognizes distillery effluents and molasses as specialized niches for yeasts with a broad substrate range, capable of tolerating multiple inhibitors and yielding high levels of ethanol at elevated temperatures. These yeasts can further be exploited for bioethanol production through SSF/SHF at a larger scale.

Non-Conventional Yeasts as Alternatives in Modern Baking for Improved Performance and Aroma Enhancement

Saccharomyces cerevisiae remains the baker’s yeast of choice in the baking industry. However, its ability to ferment cereal flour sugars and accumulate CO2 as a principal role of yeast in baking is not as unique as previously thought decades ago. The widely conserved fermentative lifestyle among the Saccharomycotina has increased our interest in the search for non-conventional yeast strains to either augment conventional baker’s yeast or develop robust strains to cater for the now diverse consumer-driven markets. A decade of research on alternative baker’s yeasts has shown that non-conventional yeasts are increasingly becoming important due to their wide carbon fermentation ranges, their novel aromatic flavour generation, and their robust stress tolerance. This review presents the credentials of non-conventional yeasts as attractive yeasts for modern baking. The evolution of the fermentative trait and tolerance to baking-associated stresses as two important attributes of baker’s yeast are discussed besides their contribution to aroma enhancement. The review further discusses the approaches to obtain new strains suitable for baking applications.

Process Intensification in Bio-Ethanol Production–Recent Developments in Membrane Separation

Ethanol is considered as a renewable transport fuels and demand is expected to grow. In this work, trends related to bio-ethanol production are described using Thailand as an example. Developments on high-temperature fermentation and membrane technologies are also explained. This study focuses on the application of membranes in ethanol recovery after fermentation. A preliminary simulation was performed to compare different process configurations to concentrate 10 wt% ethanol to 99.5 wt% using membranes. In addition to the significant energy reduction achieved by replacing azeotropic distillation with membrane dehydration, employing ethanol-selective membranes can further reduce energy demand. Silicalite membrane is a type of membrane showing one of the highest ethanol-selective permeation performances reported today. A silicalite membrane was applied to separate a bio-ethanol solution produced via high-temperature fermentation followed by a single distillation. The influence of contaminants in the bio-ethanol on the membrane properties and required further developments are also discussed.

Exploration of yeast communities in fresh coconut, palmyra, and nipa palm saps and ethanol-fermenting ability of isolated yeasts

This study aimed to explore communities and the ethanol-fermenting ability of yeasts in fresh coconut, palmyra, and nipa palm saps. From the 90 samples of coconut, palmyra, and nipa palm saps, 204 yeast isolates were isolated and identified as 15 species in the phylum Ascomycota and a species (one strain) in Basidiomycota. Saccharomyces cerevisiae, Hanseniaspora guilliermondii, and Lachancea thermotolerans were found in the saps of all three palm species. Candida tropicalis and Pichia kudriavzevii were obtained from the coconut and palmyra palm saps, Hanseniaspora vineae, Lachancea fermentati, and Pichia manshurica were present in the coconut and nipa palm saps, whereas Torulaspora delbrueckii was found in the palmyra and nipa palm saps. The species with the highest occurrence in the saps of coconut, palmyra, and nipa palms was S. cerevisiae with 76.67%, 86.70%, and 100% frequency of occurrence, respectively. Using principal coordinates analysis for ordination, no marked difference was observed in the yeast communities from the saps of the three palm species. A total of 199 isolates were found to possess ethanol-fermentation ability when cultivated using shake flask in 160 g/L of glucose medium at 28°C for 48 h. Lachancea fermentati YSP-383, isolated from nipa palm sap, produced the highest amount of ethanol (76.74 g/L). Twenty-six isolates of Candida sanyaensis (1), C. tropicalis (1), H. guilliermondii (7), L. fermentati (8), L. thermotolerans (1), Pichia kudriavzevii (2), and S. cerevisiae (6) produced high amounts of ethanol ranging from 69.57 to 76.74 g/L. The result demonstrated that yeasts in the palm saps could play roles in the natural fermentation of palm saps.

Yeast Diversity Associated with the Phylloplane of Corn Plants Cultivated in Thailand

The ecology and diversity of phylloplane yeasts is less well understood in tropical regions than in temperate ones. Therefore, we investigated the yeast diversity associated with the phylloplane of corn, an economically important crop in Thailand, by a culture-dependent method. Thirty-six leaf samples were collected and 217 yeast strains were isolated by plating leaf-washings. The strains were grouped by PCR-fingerprinting and representative strains were identified by analysis of the D1/D2 domain of the large subunit rRNA gene. In total, 212 strains were identified within 10 species in the Ascomycota and 32 species in the Basidiomycota. Five strains represented potential new species in the Basidiomycota, one strain was recently described as Papiliotrema plantarum, and four strains belonged to the genera Vishniacozyma and Rhodotorula. A higher number of strains in the Basidiomycota (81.6%) was obtained. Hannaella sinensis was the species with the highest occurrence. Principal coordinates analysis ordinations of yeast communities revealed that there were no differences in the similarity of the sampling sites. The estimation of the expected species richness showed that the observed species richness was lower than expected. This work indicated that a majority of yeast associated with the phylloplane of corn plant belongs to the phylum Basidiomycota.

Effects of various inhibitory substances and immobilization on ethanol production efficiency of a thermotolerant Pichia kudriavzevii

BACKGROUND

Although bioethanol production has been gaining worldwide attention as an alternative to fossil fuel, ethanol productivities and yields are still limited due to the susceptibility of fermentation microorganisms to various stress and inhibitory substances. There is therefore an unmet need to search for multi-stress-tolerant organisms to improve ethanol productivity and reduce production cost, particularly when lignocellulosic hydrolysates are used as the feedstock.

RESULTS

Here, we have characterized a previously isolated Pichia kudriavzevii LC375240 strain which is thermotolerant to high temperatures of 37 °C and 42 °C. More excitingly, growth and ethanol productivity of this strain exhibit strong tolerance to multiple stresses such as acetic acid, furfural, formic acid, H₂O₂ and high concentration of ethanol at 42 °C. In addition, simple immobilization of LC375240 on corncobs resulted to a more stable and higher efficient ethanol production for successive four cycles of repeated batch fermentation at 42 °C.

CONCLUSION

The feature of being thermotolerant and multi-stress-tolerant is unique to P. kudriavzevii LC375240 and makes it a good candidate for second-generation bioethanol fermentation as well as for investigating the molecular basis underlying the robust stress tolerance. Immobilization of P. kudriavzevii LC375240 on corncobs is another option for cheap and high ethanol productivity.

Conversion of cassava leaf to bioavailable, high-protein yeast cell biomass

BACKGROUND

Cassava leaves are an abundant global agricultural residue because the roots are a major source of dietary carbohydrates. Although cassava leaves are high in protein, the protein is not bioavailable. This work aimed to convert cassava leaves to a bioavailable protein-rich animal feed ingredient using high-protein yeasts.

RESULTS

The structural proteins (ca 200 g kg^-1 d.b.) from sundried cassava leaves were solubilized by mild alkali pretreatment, and the resulting cassava leaf hydrolysate (CLH) was used to screen for growth of 46 high-protein yeasts from 30 species. Promising candidates from the initial screen cultivated at a 10 mL scale demonstrated increases in relative abundance of essential amino acids over that of CLH. In particular, lysine, growth-limiting for some livestock, was increased up to 226% over the CLH content. One yeast, Pichia kudriavzevii UCDFST 11-602, was grown in 3 L of CLH in a bioreactor to examine the scale-up potential of the yeast protein production. While glucose was completely consumed, yeast growth exited log phase before depleting either carbon or nitrogen, suggesting other growth-limiting factors at the larger scale.

CONCLUSIONS

High-value animal feed with enriched essential amino acid profiles can be produced by yeasts grown on agricultural residues. Yeasts convert structural protein solubilized from cassava leaves to essential amino acid-enriched, digestible protein. The low carbohydrate content of the leaves (ca 200 g kg^-1 d.b.), however, necessitated glucose supplementation for yeast growth. © 2018 Society of Chemical Industry.

Ethanol fermentation from non-detoxified lignocellulose hydrolysate by a multi-stress tolerant yeast Candida glycerinogenes mutant

The aim of this work was to study ethanol fermentation properties of the robust mutant Candida glycerinogenes UG21 from non-detoxified lignocellulose hydrolysate. C. glycerinogenes UG21 with high tolerance to elevated temperature, acetic acid, and furfural was obtained and applied in lignocellulose-based ethanol production. C. glycerinogenes UG21 exhibited highly-efficient degradation ability to furfural. High levels of acetic acid and furfural inhibited cell growths and ethanol production of Saccharomyces cerevisiae ZWA46 and industrial Angel yeast but had a slight impact on biomass and ethanol titer of C. glycerinogenes UG21. Using non-detoxified sugarcane bagasse hydrolysate, C. glycerinogenes UG21 reached 1.24 g/L/h of ethanol productivity at 40 °C but ethanol production of S. cerevisiae ZWA46 and Angel yeast was inhibited. Further, C. glycerinogenes UG-21 exhibited 2.42-fold and 1.58-fold higher productivity than S. cerevisiae ZWA46 and Angel yeast under low-toxicity hydrolysate. Therefore, C. glycerinogenes UG-21 could be an excellent candidate for low-cost lignocelluloses ethanol production.

Selection of thermotolerant Saccharomyces cerevisiae for high temperature ethanol production from molasses and increasing ethanol production by strain improvement

A thermotolerant ethanol fermenting yeast strain is a key requirement for effective ethanol production at high temperature. This work aimed to select a thermotolerant yeast producing a high ethanol concentration from molasses and increasing its ethanol production by mutagenesis. Saccharomyces cerevisiae DMKU 3-S087 was selected from 168 ethanol producing strains because it produced the highest ethanol concentration from molasses at 40 °C. Optimization of molasses broth composition was performed by the response surface method using Box-Behnken design. In molasses broth containing optimal total fermentable sugars (TFS) of 200 g/L and optimal (NH₄)₂SO₄ of 1 g/L, with an initial pH of 5.5 by shaking flask cultivation at 40 °C ethanol, productivity and yield were 58.4 ± 0.24 g/L, 1.39 g/L/h and 0.29 g/g, respectively. Batch fermentation in a 5 L stirred-tank fermenter with 3 L optimized molasses broth adjusted to an initial pH of 5.5 and fermentation controlled at 40 °C and 300 rpm agitation resulted in 72.4 g/L ethanol, 1.21 g/L/h productivity and 0.36 g/g yield at 60 h. Strain DMKU 3-S087 improvement was performed by mutagenesis using ultraviolet radiation and ethyl methane sulfonate (EMS). Six EMS mutants produced higher ethanol (65.2 ± 0.48-73.0 ± 0.54 g/L) in molasses broth containing 200 g/L TFS and 1 g/L (NH₄)₂SO₄ by shake flask fermentation at 37 °C than the wild type (59.8 ± 0.25 g/L). Among these mutants, only mutant S087E100-265 produced higher ethanol (62.5 ± 0.26 g/L) than the wild type (59.5 ± 0.02 g/L) at 40 °C. In addition, mutant S087E100-265 showed better tolerance to high sugar concentration, furfural, hydroxymethylfurfural and acetic acid than the wild type.

Comparison of Cassava Starch with Corn as a Feedstock for Bioethanol Production

Cassava is a high potential feedstock for bioethanol production in Asian countries, primarily due to high yield of carbohydrate per unit land, and its ability to grow on marginal lands with minimal agrochemical requirements. The objective of this study was to compare the bioethanol production from cassava starch with corn starch using a conventional and a raw/granular starch hydrolyzing process (GSH). The fermentation performance of cassava starch was compared with three corn starch types with different amylose: Amylopectin ratios. The final ethanol concentration with cassava starch was similar to that of two corn starch types, dent corn and waxy corn for both processes. For the cassava starch, the ethanol concentration achieved with GSH process was 2.8% higher than that in the conventional process. Cassava starch yielded the highest fermentation rates of the four starches investigated, during the conventional process. Ethanol production and fermentation profiles comparable with corn, a widely used feedstock, makes cassava starch an attractive substrate for bioethanol production.

The potential of the newly isolated thermotolerant yeast Pichia kudriavzevii RZ8-1 for high-temperature ethanol production

High potential, thermotolerant, ethanol-producing yeasts were successfully isolated in this study. Based on molecular identification and phylogenetic analysis, the isolated thermotolerant yeasts were clustered in the genera of Pichia kudriavzevii, Candida tropicalis, Candida orthopsilosis, Candida glabrata and Kodamea ohmeri. A comparative study of ethanol production using 160g/L glucose as a substrate revealed several yeast strains that could produce high ethanol concentrations at high temperatures. When sugarcane bagasse (SCB) hydrolysate containing 85g/L glucose was used as a substrate, the yeast strain designated P. kudriavzevii RZ8-1 exhibited the highest ethanol concentrations of 35.51g/L and 33.84g/L at 37°C and 40°C, respectively. It also exhibited multi-stress tolerance, such as heat, ethanol and acetic acid tolerance. During ethanol fermentation at high temperature (42°C), genes encoding heat shock proteins (ssq1 and hsp90), alcohol dehydrogenases (adh1, adh2, adh3 and adh4) and glyceraldehyde-3-phosphate dehydrogenase (tdh2) were up-regulated, suggesting that these genes might play a crucial role in the thermotolerance ability of P. kudriavzevii RZ8-1 under heat stress. These findings suggest that the growth and ethanol fermentation activities of this organism under heat stress were restricted to the expression of genes involved not only in heat shock response but also in the ethanol production pathway.

Characterization of bacteria and yeasts isolated from traditional fermentation starter (Fen-Daqu) through a 1H NMR-based metabolomics approach

Daqu is a traditional fermentation starter for the production of baijiu and vinegar. It is an important saccharifying and fermenting agent associated with alcoholic fermentation and also a determining factor for the flavour development of these products. Bacterial and yeast isolates from a traditional fermentation starter (Fen-Daqu) were examined for their amylolytic activity, ethanol tolerance and metabolite production during sorghum-based laboratory-scale alcoholic fermentation. The selected strains (Bacillus licheniformis, Pediococcus pentosaceus, Lactobacillus plantarum, Pichia kudriavzevii, Wickerhamomyces anomalus, Saccharomyces cerevisiae, and Saccharomycopsis fibuligera) were blended in different combinations, omitting one particular strain in each mixture. ¹H nuclear magnetic resonance (NMR) spectroscopy coupled with multivariate statistical analysis was used to investigate the influence of the selected strains on the metabolic changes observed under the different laboratory-controlled fermentation conditions. Principal component analysis showed differences in the metabolites produced by different mixtures of pure cultures. S. cerevisiae was found to be superior to other species with respect to ethanol production. S. fibuligera and B. licheniformis converted starch or polysaccharides to soluble sugars. Lactic acid bacteria had high amylolytic and proteolytic activities, thereby contributing to increased saccharification and protein degradation. W. anomalus was found to have a positive effect on the flavour of the Daqu-derived product. This study highlights the specific functions of S. cerevisiae, S. fibuligera, B. licheniformis, W. anomalus and lactic acid bacteria in the production of light-flavour baijiu (fen-jiu). Our results show that all investigated species deliver an important contribution to the functionality of the fermentation starter Daqu.

Evaluation of antimicrobial activity and probiotic properties of wild-strain Pichia kudriavzevii isolated from frozen idli batter

The present research was undertaken to study the probiotic characteristics of Pichia kudriavzevii isolated from frozen idli batter. Polymerase chain reaction amplification with 18S rRNA primers confirmed Pichia kudriavzevii, a xylose-utilizing probiotic strain. It was resistant to physiological concentrations of bile salts, pepsin and pancreatic enzyme. It also showed efficient auto-aggregation as well as co-aggregation ability with four commercial probiotic yeasts and exhibited good hydrophobicity in xylene and toluene. The strain inhibited the growth of 13 enteropathogens and showed a commensal relationship with four commercial probiotic yeast and bacteria. Moreover, it was resistant to 30 antibiotics with different modes of action. The yeast exhibited thermotolerance up to 95 °C for 2 h. The cell-free supernatants were also found to be heat stable, indicating the presence of thermostable secondary metabolites. Hence it could be exploited as starter culture, co-culture or probiotic in the preparation of fermented products or incorporated in heatable foods as well. Copyright © 2016 John Wiley & Sons, Ltd.

Production of bioethanol from multiple waste streams of rice milling

This work describes the feasibility of using rice milling by-products as feedstock for bioethanol. Starch-rich residues (rice bran, broken, unripe and discolored rice) were individually fermented (20%w/v) through Consolidated Bioprocessing by two industrial engineered yeast secreting fungal amylases. Rice husk (20%w/v), mainly composed by lignocellulose, was pre-treated at 55°C with alkaline peroxide, saccharified through optimized dosages of commercial enzymes (Cellic® CTec2) and fermented by the recombinant strains. Finally, a blend of all the rice by-products, formulated as a mixture (20%w/v) according to their proportions at milling plants, were co-processed to ethanol by optimized pre-treatment, saccharification and fermentation by amylolytic strains. Fermenting efficiency for each by-product was high (above 88% of the theoretical) and further confirmed on the blend of residues (nearly 52g/L ethanol). These results demonstrated for the first time that the co-conversion of multiple waste streams is a promising option for second generation ethanol production.

Isolation of thermotolerant yeast Pichia kudriavzevii from nuruk

Thermotolerant yeast strains were isolated from nuruk, a traditional Korean fermentation starter in which variety of microorganisms are present. Among the isolates, the MBY1358 identified as yeast Pichia kudriavzevii showed significantly higher growth rate (0.59 ± 0.00 1/h) at 44 °C than other strains. Maximum ethanol concentration of 8.35 ± 0.03 g/L was obtained from 20 g/L glucose with yield of 0.44 ± 0.01 g/g at 44 °C, which is 1.14 times ethanol production of the control strain of P. kudriavzevii. The MBY1358, which was significantly more thermotolerant than the control strain and fermented 200 g/L glucose to 107.33 ± 5.03 g/L ethanol at 44 °C, was deposited to Korean Collection for Type Cultures (KCTC) under the accession number 27654.

Unraveling Core Functional Microbiota in Traditional Solid-State Fermentation by High-Throughput Amplicons and Metatranscriptomics Sequencing

Fermentation microbiota is specific microorganisms that generate different types of metabolites in many productions. In traditional solid-state fermentation, the structural composition and functional capacity of the core microbiota determine the quality and quantity of products. As a typical example of food fermentation, Chinese Maotai-flavor liquor production involves a complex of various microorganisms and a wide variety of metabolites. However, the microbial succession and functional shift of the core microbiota in this traditional food fermentation remain unclear. Here, high-throughput amplicons (16S rRNA gene amplicon sequencing and internal transcribed space amplicon sequencing) and metatranscriptomics sequencing technologies were combined to reveal the structure and function of the core microbiota in Chinese soy sauce aroma type liquor production. In addition, ultra-performance liquid chromatography and headspace-solid phase microextraction-gas chromatography-mass spectrometry were employed to provide qualitative and quantitative analysis of the major flavor metabolites. A total of 10 fungal and 11 bacterial genera were identified as the core microbiota. In addition, metatranscriptomic analysis revealed pyruvate metabolism in yeasts (genera Pichia, Schizosaccharomyces, Saccharomyces, and Zygosaccharomyces) and lactic acid bacteria (genus Lactobacillus) classified into two stages in the production of flavor components. Stage I involved high-level alcohol (ethanol) production, with the genus Schizosaccharomyces serving as the core functional microorganism. Stage II involved high-level acid (lactic acid and acetic acid) production, with the genus Lactobacillus serving as the core functional microorganism. The functional shift from the genus Schizosaccharomyces to the genus Lactobacillus drives flavor component conversion from alcohol (ethanol) to acid (lactic acid and acetic acid) in Chinese Maotai-flavor liquor production. Our findings provide insight into the effects of the core functional microbiota in soy sauce aroma type liquor production and the characteristics of the fermentation microbiota under different environmental conditions.

Ethanol production from dilute-acid steam exploded lignocellulosic feedstocks using an isolated multistress-tolerant Pichia kudriavzevii strain

Renewable and low‐cost lignocellulosic wastes have attractive applications in bioethanol production. The yeast Saccharomyces cerevisiae is the most widely used ethanol‐producing microbe; however, its fermentation temperature (30–35°C) is not optimum (40–50°C) for enzymatic hydrolysis in the simultaneous saccharification and fermentation (SSF) process. In this study, we successfully performed an SSF process at 42°C from a high solid loading of 20% (w/v) acid‐impregnated steam explosion (AISE)‐treated rice straw with low inhibitor concentrations (furfural 0.19 g l⁻¹ and acetic acid 0.95 g l⁻¹) using an isolate Pichia kudriavzevii SI, where the ethanol titre obtained (33.4 g_p l⁻¹) was nearly 39% greater than that produced by conventional S. cerevisiae BCRC20270 at 30°C (24.1 g_p l⁻¹). In addition, P. kudriavzevii SI exhibited a high conversion efficiency of > 91% from enzyme‐saccharified hydrolysates of AISE‐treated plywood chips and sugarcane bagasse, although high concentrations of furaldehydes, such as furfural 1.07–1.21 g l⁻¹, 5‐hydroxymethyl furfural 0.20−0.72 g l⁻¹ and acetic acid 4.80–7.65 g l⁻¹, were present. This is the first report of ethanol fermentation by P. kudriavzevii using various acid‐treated lignocellulosic feedstocks without detoxification or added nutrients. The multistress‐tolerant strain SI has greater potential than the conventional S. cerevisiae for use in the cellulosic ethanol industry.

Genome Sequences of Cyberlindnera fabianii 65, Pichia kudriavzevii 129, and Saccharomyces cerevisiae 131 Isolated from Fermented Masau Fruits in Zimbabwe

Cyberlindnera fabianii 65, Pichia kudriavzevii 129, and Saccharomyces cerevisiae 131 have been isolated from the microbiota of fermented masau fruits. C. fabianii and P. kudriavzevii especially harbor promising features for biotechnology and food applications. Here, we present the draft annotated genome sequences of these isolates.

High-temperature ethanol production using thermotolerant yeast newly isolated from Greater Mekong Subregion

The application of high-potential thermotolerant yeasts is a key factor for successful ethanol production at high temperatures. Two hundred and thirty-four yeast isolates from Greater Mekong Subregion (GMS) countries, i.e., Thailand, The Lao People's Democratic Republic (Lao PDR) and Vietnam were obtained. Five thermotolerant yeasts, designated Saccharomyces cerevisiae KKU-VN8, KKU-VN20, and KKU-VN27, Pichia kudriavzevii KKU-TH33 and P. kudriavzevii KKU-TH43, demonstrated high temperature and ethanol tolerance levels up to 45 °C and 13% (v/v), respectively. All five strains produced higher ethanol concentrations and exhibited greater productivities and yields than the industrial strain S. cerevisiae TISTR5606 during high-temperature fermentation at 40 °C and 43 °C. S. cerevisiae KKU-VN8 demonstrated the best performance for ethanol production from glucose at 37 °C with an ethanol concentration of 72.69 g/L, a productivity of 1.59 g/L/h and a theoretical ethanol yield of 86.27%. The optimal conditions for ethanol production of S. cerevisiae KKU-VN8 from sweet sorghum juice (SSJ) at 40 °C were achieved using the Box–Behnken experimental design (BBD). The maximal ethanol concentration obtained during fermentation was 89.32 g/L, with a productivity of 2.48 g/L/h and a theoretical ethanol yield of 96.32%. Thus, the newly isolated thermotolerant S. cerevisiae KKU-VN8 exhibits a great potential for commercial-scale ethanol production in the future.

Cellulose Biorefinery Based on a Combined Catalytic and Biotechnological Approach for Production of 5-HMF and Ethanol

In this study, a combination of catalytic and biotechnological processes was proposed for the first time for application in a cellulose biorefinery for the production of 5-hydroxymethylfurfural (5-HMF) and bioethanol. Hydrolytic dehydration of the mechanically activated microcrystalline cellulose over a carbon-based mesoporous Sibunt-4 catalyst resulted in moderate yields of glucose and 5-HMF (21.1-25.1 and 6.6-9.4 %). 5-HMF was extracted from the resulting mixture with isobutanol and subjected to ethanol fermentation. A number of yeast strains were isolated that also revealed high thermotolerance (up to 50 °C) and resistance to inhibitors found in the hydrolysates. The strains Kluyveromyces marxianus C1 and Ogataea polymorpha CBS4732 were capable of producing ethanol from processed catalytic hydrolysates of cellulose at 42 °C, with yields of 72.0±5.7 and 75.2±4.3 % from the maximum theoretical yield of ethanol, respectively.

High temperature alcoholic fermentation of orange peel by the newly isolated thermotolerant Pichia kudriavzevii KVMP10

This work explores the potential for the development of orange peel based ethanol bioprocesses through isolation of the thermotolerant Pichia kudriavzevii KVMP10. A model solution of hydrolysed Valencia orange peel was employed to determine the ethanologenic potential of the yeast, which was maximized at 42°C producing 54 g l(-1) of ethanol. The effect of orange peel oil on bioethanol formation was investigated at 30 and 42°C confirming that the minimum inhibitory peel oil content was 0·01% (v/v). Pichia kudriavzevii KVMP10 demonstrated significant technological advantages for the production of sustainable bioenergy, such as utilization of both hexoses (glucose, sucrose, fructose and galactose) and pentoses (xylose) at high temperatures, exemplifying its great potential for application in orange peel based biorefineries for ethanol production.

SIGNIFICANCE AND IMPACT OF THE STUDY

Citrus peel waste is one of the most underutilized and geographically diverse residues in the planet. In attempt to develop a citrus peel based biorefinery we report here the isolation of a yeast which exhibited favourable technological characteristics for the production of ethanol through utilization of the specific food waste. Pichia kudriavzevii KVMP10 was highly thermotolerant and utilized both hexoses and pentoses for ethanol production, which was achieved at elevated rates, highlighting its great potential for application in ethanol production processes from citrus peel.

Preliminary physiological characteristics of thermotolerant Saccharomyces cerevisiae clinical isolates identified by molecular biology techniques

The aim of the study was a molecular identification and physiological characteristic of the five Saccharomyces cerevisiae strains isolated from patients. The tested isolates were compared with control strains (which are of laboratory or commercial origin). The relation of the isolates to baker's yeast S. cerevisiae was studied using species-specific primers in PCR analysis of the ITS-26S region of DNA. Five isolates were genetically identified as the yeast belonging to the genus S. cerevisiae. The effects of temperature and carbon sources on the growth of the yeast strains were analysed. A quantitative characterization of growth kinetics approve that some tested isolates are thermotolerant and are able to grow at range 37-39°C. Among them, one representative is characterized by the highest specific growth rate (0·637 h(-1) ). In conclusions, some strains are defined as potential candidates to use in the biotechnology due to a higher growth rate at elevated temperatures. Screening for further evaluation of biotechnological significance of the tested isolates will be done (e.g. ethanol and trehalose production at higher temperatures). The physiological characterization and confirmation of species identification by molecular methods for yeasts important in the context of biotechnology industry were demonstrated.

SIGNIFICANCE AND IMPACT OF THE STUDY

Thermotolerant microbial strains are required in various industrial applications, for improving productivity and for decreasing the risk of undesirable contaminations when higher temperatures are used. It is important to search for such strains in extreme environments or exotic niches. In this paper, new thermotolerant strains were identified belonging to the Saccharomyces cerevisiae, but differed from typical bakers' yeast, essentially by their growth rate at higher temperature. The described yeast strains are promising for using in biotechnological industry, especially, for production of ethanol and other products at higher temperatures.

Pichia kudriavzevii as a representative yeast of North Patagonian winemaking terroir

Terroir concept includes specific soil, topography, climate, landscape characteristics and biodiversity features. In reference to the last aspect, recent studies investigating the microbial biogeography (lately called 'microbial terroir') have revealed that different wine-growing regions maintain different microbial communities. The aim of the present work was to identify potential autochthonous fermentative yeasts isolated from native plants in North Patagonia, Schinus johnstonii, Ephedra ochreata and Lycium chilense, that could be associated to the specific vitivinicultural terroir of this region. Different Pichia kudriavzevii isolates were recovered from these plants and physiologically and genetically compared to regional wine isolates and foreign reference strains of the same species. All isolates were subjected to molecular characterization including mtDNA-RFLP, RAPD-PCR and sequence analysis. Both wine and native P. kudriavzevii isolates from Patagonia showed similar features, different from those showed by foreign strains, suggesting that this species could be part of a specific regional terroir from North Patagonia.

Genomic analyses of thermotolerant microorganisms used for high-temperature fermentations

Environmental adaptation is considered as one of the most challenging subjects in biology to understand evolutionary or ecological diversification processes and in biotechnology to obtain useful microbial strains. Temperature is one of the important environmental stresses; however, microbial adaptation to higher temperatures has not been studied extensively. For industrial purposes, the use of thermally adapted strains is important, not only to reduce the cooling expenses of the fermentation system, but also to protect fermentation production from accidental failure of thermal management. Recent progress in next-generation sequencing provides a powerful tool to track the genomic changes of the adapted strains and allows us to compare genomic DNA sequences of conventional strains with those of their closely related thermotolerant strains. In this article, we have attempted to summarize our recent approaches to produce thermotolerant strains by thermal adaptation and comparative genomic analyses of Acetobacter pasteurianus for high-temperature acetic acid fermentations, and Zymomonas mobilis and Kluyveromyces marxianus for high-temperature ethanol fermentations. Genomic analysis of the adapted strains has found a large number of mutations and/or disruptions in highly diversified genes, which could be categorized into groups related to cell surface functions, ion or amino acid transporters, and some transcriptional factors. Furthermore, several phenotypic and genetic analyses revealed that the thermal adaptation could lead to decreased ROS generation in cells that produce higher ROS levels at higher temperatures. Thus, it is suggested that the thermally adapted cells could become robust and resistant to many stressors, and thus could be useful for high-temperature fermentations.

A new search for thermotolerant yeasts, its characterization and optimization using response surface methodology for ethanol production

The progressive rise in energy crisis followed by green house gas (GHG) emissions is serving as the driving force for bioethanol production from renewable resources. Current bioethanol research focuses on lignocellulosic feedstocks as these are abundantly available, renewable, sustainable and exhibit no competition between the crops for food and fuel. However, the technologies in use have some drawbacks including incapability of pentose fermentation, reduced tolerance to products formed, costly processes, etc. Therefore, the present study was carried out with the objective of isolating hexose and pentose fermenting thermophilic/thermotolerant ethanologens with acceptable product yield. Two thermotolerant isolates, NIRE-K1 and NIRE-K3 were screened for fermenting both glucose and xylose and identified as Kluyveromyces marxianus NIRE-K1 and K. marxianus NIRE-K3. After optimization using Face-centered Central Composite Design (FCCD), the growth parameters like temperature and pH were found to be 45.17°C and 5.49, respectively for K. marxianus NIRE-K1 and 45.41°C and 5.24, respectively for K. marxianus NIRE-K3. Further, batch fermentations were carried out under optimized conditions, where K. marxianus NIRE-K3 was found to be superior over K. marxianus NIRE-K1. Ethanol yield (Y x∕s ), sugar to ethanol conversion rate (%), microbial biomass concentration (X) and volumetric product productivity (Q p ) obtained by K. marxianus NIRE-K3 were found to be 9.3, 9.55, 14.63, and 31.94% higher than that of K. marxianus NIRE-K1, respectively. This study revealed the promising potential of both the screened thermotolerant isolates for bioethanol production.

Organisms for biofuel production: natural bioresources and methodologies for improving their biosynthetic potentials

In order to relieve the pressure of energy supply and environment contamination that humans are facing, there are now intensive worldwide efforts to explore natural bioresources for production of energy storage compounds, such as lipids, alcohols, hydrocarbons, and polysaccharides. Around the world, many plants have been evaluated and developed as feedstock for bioenergy production, among which several crops have successfully achieved industrialization. Microalgae are another group of photosynthetic autotroph of interest due to their superior growth rates, relatively high photosynthetic conversion efficiencies, and vast metabolic capabilities. Heterotrophic microorganisms, such as yeast and bacteria, can utilize carbohydrates from lignocellulosic biomass directly or after pretreatment and enzymatic hydrolysis to produce liquid biofuels such as ethanol and butanol. Although finding a suitable organism for biofuel production is not easy, many naturally occurring organisms with good traits have recently been obtained. This review mainly focuses on the new organism resources discovered in the last 5 years for production of transport fuels (biodiesel, gasoline, jet fuel, and alkanes) and hydrogen, and available methods to improve natural organisms as platforms for the production of biofuels.