Effect of Formic Acid Treatment on the Structure and Catalytic Activity of Co3O4 for N2O Decomposition

Sulfur oxidation mediated controllable reconstruction on LiCo1.9Fe0.1O4 for boosted electrochemical water oxidation

Appropriate contact between catalysts and reactants calls for optimized exposure of active sites in the near-surface region, which can be accomplished by tuning the surface reconstruction degree. Understanding and conducting the controllable surface reconstruction of oxygen evolution reaction (OER) catalysts lays the foundation to finetune their OER activity. Herein, we explore the construction of a tunable amorphous oxyhydroxide shell on LiCo1.9Fe0.1O4via heat-sulfurization, followed by electrochemical treatment. The 8-electron sulfide oxidation reaction (SOR) transforms the sulfide shell to amorphous oxyhydroxide and generates surface-anchored SO42-, which act together to boost the OER. The electrocatalyst with optimal sulfurization exhibits 2.57 times higher than the current density at 1.6 V vs. RHE compared to the original LCFO. This work is dedicated to understanding controllable reconstruction and designing efficient OER electrocatalysts.

Multifunctional hybrid films made from CoT3OTx4 and CoFeT2OT4 nanoparticles inside a poly 3-hydroxybutyrate matrix and study of their impact in methyl orange photodegradation

This work aims to produce hybrid materials with potential applications in dye photodegradation. Therefore, hybrid films were obtained by incorporating cobalt (II, III) oxide (Co3O4) or cobalt ferrite (CoFe2O4) nanoparticles (NPs) with 18 ± 1.6 nm and 26 ± 1.3 nm, respectively, into a poly 3-hydroxybutyrate (P3HB) polymeric matrix. The Co3O4@P3HB and CoFe2O4@P3HB hybrid films were fabricated by solvent casting in a ratio of 85 mg to 15 mg (P3HB-NPs). Different spectroscopic and microscopy techniques characterized the Co3O4 and CoFe2O4 NPs and the P3HB, Co3O4@P3HB and CoFe2O4@P3HB films. The optical band gap for Co3O4 and CoFe2O4 NPs was estimated from their diffuse reflectance spectra (DRS) around 2.5 eV. X-ray diffraction (XRD) of the hybrid films revealed that the nanometric sizes of the Co3O4 and CoFe2O4 nanoparticles incorporated into the P3HB are preserved. The magnetic hysteresis curve of CoFe2O4 nanoparticles and CoFe2O4@P3HB film showed a ferromagnetic behaviour at 300 K. Transmission electron microscopy (TEM) confirmed the formation of nanocrystals, and scanning electron microscopy (SEM) provided evidence for the successful incorporation of the NPs into the P3HB matrix. The surface roughness and hydrophilicity of the hybrid films are increased compared to the P3HB film. The impact of the nanoparticles and the hybrid films on the photodegradation of methyl orange (MO) in its acidic form was studied. The photodegradation tests were carried out by direct sunlight exposure. The CoFe2O4@P3HB hybrid film achieved 85% photodegradation efficiency of a methyl orange solution of 20 ppm after 15 minutes of exposure to sunlight. After 30 minutes of exposure to sunlight, the nanoparticles and the hybrid films reached about 90% of the MO degradation. The results suggest that combining nanoparticles with the polymer significantly enhances photodegradation compared to isolated nanoparticles.

N2O Decomposition on Singly and Doubly (K and Li)-Doped Co3O4 Nanocubes─Establishing Key Factors Governing Redox Behavior of Catalysts

The intimate mechanism of N2O decomposition on bare and redox-tuned Co3O4 nanocubes (achieved by single (Li or K) and double (Li and K) doping) was elucidated. The catalysts synthesized by the hydrothermal method were characterized by X-ray electron absorption fine structure measurements, X-ray diffraction, Raman spectroscopy, scanning electron microscopy, transmission electron microscopy, and Kelvin Probe techniques. TPSR and steady-state isothermal catalytic tests reveal that the N2O turnover frequencies are critically sensitive to the work function of the catalysts, adjusted purposely by doping. For the catalysts obtained by one-pot hydrothermal synthesis, lithiation of the Co3O4 nanocubes leads to the formation of {Li'8a, Co·16d} species, decreasing steadily the work function and the activity, while for the catalysts prepared by postsynthesis impregnation, formation of {Li'8a, Co'16d, Co··16c} species leads to a volcano-type dependence of the catalytic activity and the work function in parallel. The beneficial effect of potassium was discussed in terms of mitigation of surface potential buildup due to the accumulation of ionosorbed oxygen intermediates (surface electrostatics), which hinders the interfacial electron transfer. Analysis of the catalytic activity response to the redox tuning of Co3O4, substantiated by DFT calculations, allowed for a straightforward conceptualization of the redox nature of the N2O decomposition in terms of the lineup of frontier orbitals of the N2O/N2O- and O2-/O2 reactants with the surface DOS structure and the resultant molecular orbital interactions. The positions of the virtual bonding 3πg0(N2O)-α-3dz2 and the occupied 2πg1(O2-)-α-3dz2 states relative to the Fermi energy level play a crucial role in the regulation of the forward and backward interfacial electron transfer events, which drive the redox process.

Graphitized Carbon-Supported Co@Co3O4 for Ozone Decomposition over the Entire Humidity Range

Ground-level ozone (O3) pollution has emerged as a significant concern due to its detrimental effects on human health and the ecosystem. Catalytic removal of O3 has proven to be the most efficient and cost-effective method. However, its practical application faces substantial challenges, particularly in relation to its effectiveness across the entire humidity range. Herein, we proposed a novel strategy termed "dual active sites" by employing graphitized carbon-loaded core-shell cobalt catalysts (Co@Co3O4-C). Co@Co3O4-C was synthesized via the pyrolysis of a Co-organic ligand as the precursor. By utilizing this approach, we achieved a nearly constant 100% working efficiency of the Co@Co3O4-C catalyst for catalyzing O3 decomposition across the entire humidity range. Physicochemical characterization coupled with density functional theory calculations elucidates that the presence of encapsulated metallic Co nanoparticles enhances the reactivity of the cobalt oxide capping layer. Additionally, the interface carbon atom, strongly influenced by adjacent metallic Co nuclei, functions as a secondary active site for the decomposition of O3 decomposition. The utilization of dual active sites effectively mitigates the competitive adsorption of H2O molecules, thus isolating them for adsorption in the cobalt oxide capping layer. This optimized configuration allows for the decomposition of O3 without interference from moisture. Furthermore, O3 decomposition monolithic catalysts were synthesized using a material extrusion-based three-dimensional (3D) printing technology, which demonstrated a low pressure drop and exceptional mechanical strength. This work provides a "dual active site" strategy for the O3 decomposition reaction, realizing O3 catalytic decomposition over the entire humidity range.

Impact of Co-Doping on the Visible Light-Driven Photocatalytic and Photoelectrochemical Activities of Eu(OH)3

The microwave-assisted synthesis approach was used to synthesize Eu(OH)3 and Co-Eu(OH)3 nanorods. Various techniques were used to investigate the structural, optical, and morphological features of the Eu(OH)3 and Co-Eu(OH)3 NRs. Both Eu(OH)3 and Co-Eu(OH)3 NRs were found to be hexagonal with crystallite sizes ranging from 21 to 35 nm. FT-IR and Raman spectra confirmed the formation of Eu(OH)3 and Co-Eu(OH)3. Rod-shaped Eu(OH)3 and Co-Eu(OH)3 with average lengths and diameters ranging from 27 to 50 nm and 8 to 12 nm, respectively, were confirmed by TEM. The addition of Co was found to increase the particle size. Furthermore, with increased Co doping, the band gap energies of Co-Eu(OH)3 NRs were lowered (3.80-2.49 eV) in comparison to Eu(OH)3, and the PL intensities with Co doping were quenched, suggesting the lessening of electron/hole recombination. The effect of these altered properties of Eu(OH)3 and Co-Eu(OH)3 was observed through the photocatalytic degradation of brilliant green dye (BG) and photoelectrochemical activity. In the photocatalytic degradation of BG, 5% Co-Eu(OH)3 had the highest response. However, photoelectrochemical experiments suggested that 10% Co-Eu(OH)3 NRs showed improved activity when exposed to visible light. As a result, Co-Eu(OH)3 NRs have the potential to be a promising visible-light active material for photocatalysis.

Efficient C-N coupling for urea electrosynthesis on defective Co3O4 with dual-functional sites

Urea electrosynthesis under ambient conditions is emerging as a promising alternative to conventional synthetic protocols. However, the weak binding of reactants/intermediates on the catalyst surface induces multiple competing pathways, hindering efficient urea production. Herein, we report the synthesis of defective Co3O4 catalysts that integrate dual-functional sites for urea production from CO2 and nitrite. Regulating the reactant adsorption capacity on defective Co3O4 catalysts can efficiently control the competing reaction pathways. The urea yield rate of 3361 mg h-1 gcat-1 was achieved with a corresponding faradaic efficiency (FE) of 26.3% and 100% carbon selectivity at a potential of -0.7 V vs. the reversible hydrogen electrode. Both experimental and theoretical investigations reveal that the introduction of oxygen vacancies efficiently triggers the formation of well-matched adsorption/activation sites, optimizing the adsorption of reactants/intermediates while decreasing the C-N coupling reaction energy. This work offers new insights into the development of dual-functional catalysts based on non-noble transition metal oxides with oxygen vacancies, enabling the efficient electrosynthesis of essential C-N fine chemicals.

A facile and efficient method for preparing La-doped Co3O4 by electrodeposition as an efficient air cathode in rechargeable zinc-air batteries: Role of oxygen vacancies

A rechargeable zinc-air battery (ZAB) is a promising candidate for simple and low-cost energy storage systems. However, preparing the air cathode material using a binder-free method and a bifunctional catalyst is still the major challenge in the field. Herein, we demonstrate the effect of different La contents doped into the Co3O4 spinel structure in the presence of oxygen vacancies prepared by a facile and efficient electrodeposition technique on the oxygen evolution reaction (OER), oxygen reduction reaction (ORR), and ZAB performance. Incorporating the La dopant into the Co3O4 improves the OER and ORR performances and thus enhances the specific capacity and energy density of ZAB. The optimal La-doping amount in the CoLa-1 catalyst demonstrates high feasibility for practical application with a capacity of 780 ± 24 mAh/g and an energy density of 901 ± 39 mW g-1, significantly outperforming the pristine Co3O4. The stability and cycling tests reveal good durability performance after 300 cycles and 100 h of testing without degradation, which is much more stable than the benchmark Pt/C + RuO2 electrode. The performance enhancement is attributed to the synergetic effect of high active surface area, low charge transfer resistance, and optimal oxygen vacancies. A kinetic micromechanism is proposed to illustrate the importance of the oxygen vacancy amount in trapping oxygen gas and maximizing the number of ORR and OER reactions.

Synthesis of CuxCo3-xO4 nanoparticles by a sonochemical method and characterization of structural and optical properties and photocatalytic activity for the degradation of methylene blue

In the present investigation, CuxCo3-xO4 (x = 0, 0.02, 0.04, 0.06, 0.1) nanoparticles have been synthesized by the sonochemical method and subsequent calcination at high temperature. The synthesized nanoparticles were further characterized using X-ray diffraction, UV-vis spectroscopy, FT-IR spectroscopy, Raman spectroscopy, transmission electron microscopy and energy-dispersive X-ray spectroscopy. The analysis results showed that nanoparticle size, band gap and photocatalytic activity of CuxCo3-xO4 compounds change by altering the Cu doping content. According to the XRD study, no impurity peaks associated with copper or copper oxide phases were observed in the diffractograms of doped samples. The highest degradation of methylene blue dye under visible light was observed in the presence of Cu0.02Co2.98O4 nanoparticles and found to be 87.51% after 330 minutes. This value increased with increasing the amount of photocatalyst and with decreasing dye concentration.

Hollow-Structured N-doped carbon-embedded CoFe NanoAlloy for boosting activation of Monopersulfate: Engineered interface and heteroatom Doping-Induced enhancements

While transition metals are useful for activating monopersulfate (MPS) to degrade contaminants, bimetallic alloys exhibit stronger catalytic activities owing to several favorable effects. Therefore, even though Co is an efficient metal for MPS activation, CoFe alloys are even more promising heterogeneous catalysts for MPS activation. Immobilization/embedment of CoFe alloy nanoparticles (NPs) onto hetero-atom-doped carbon matrices appears as a practical strategy for evenly dispersing CoFe NPs and enhancing catalytic activities via interfacial synergies between CoFe and carbon. Herein, N-doped carbon-embedded CoFe alloy (NCCF) is fabricated here to exhibit a unique hollow-engineered nanostructure and the composition of CoFe alloy by using Co-ZIF as a precursor after the facile etching and Fe doping. The Fe dopant embeds CoFe alloy NPs into the hollow-structured N-doped carbon substrate, enabling NCCF to possess the higher mesoscale porosity, active N species as well as more superior electrochemical properties than its analogue without Fe dopants, carbon matrix-supported cobalt (NCCo). Thus, NCCF exhibits a considerably larger activity than NCCo and the benchmark catalyst, Co3O4 NP, for MPS activation to degrade an environmental hormone, dihydroxydiphenyl ketone (DHPK). Besides, NCCF + MPS shows an even lower activation energy for DHPK degradation than literatures, and retains its high efficiency for eliminating DHPK in different water media. DHPK degradation pathway and ecotoxicity assessment are unraveled based on the insights from the computational chemistry, demonstrating that DHPK degradation by NCCF + MPS did not result in the formation of toxic and highly toxic by-products. These features make NCCF a promising heterogeneous catalyst for MPS activation to degrade DHPK.

Interfacial Effect-Induced Electrocatalytic Activity of Spinel Cobalt Oxide in Methanol Oxidation Reaction

In this study, spinel cobalt oxide (Co3O4) nanoparticles without combining with any other metal atoms have been decorated through the influence of two hard templating agents, viz., zeolite-Y and carboxy-functionalized multiwalled carbon nanotubes (COOH-MWCNT). The adornment of the Co3O4 nanoparticles, through the combined impact of the aluminosilicate and carbon framework has resulted in quantum interference, causing the reversal of signatory Raman peaks of Co3O4. Apart from the construction of small Co3O4 nanoparticles at the interface of the two matrices, the particles were aligned along the direction of COOH-MWCNT. The catalyst Co3O4-Y-MWCNT exhibited excellent catalytic activity toward the methanol oxidation reaction (MOR) in comparison to Co3O4-Y, Co3O4-MWCNT, and bared Co3O4 with the current density of 0.92 A mg-1 at an onset potential of 1.33 V versus RHE. The material demonstrated persistent electrocatalytic activity up to 300 potential cycles and 20,000 s without substantial current density loss. High surface area of zeolite-Y in combination with the excellent conductivity of the COOH-MWCNT enhanced the electrocatalytic performance of the catalyst. The simplicity of synthesis, scale-up, and remarkable electrocatalytic activity of the catalyst Co3O4-Y-MWCNT provided an effective way toward the development of anode materials for direct methanol fuel cells.

Hollow-Architected Heteroatom-Doped Carbon-Supported Nanoscale Cu/Co as an Enhanced Magnetic Activator for Oxone to Degrade Toxicants in Water

Even though transition metals can activate Oxone to degrade toxic contaminants, bimetallic materials possess higher catalytic activities because of synergistic effects, making them more attractive for Oxone activation. Herein, nanoscale CuCo-bearing N-doped carbon (CuCoNC) can be designed to afford a hollow structure as well as CuCo species by adopting cobaltic metal organic frameworks as a template. In contrast to Co-bearing N-doped carbon (CoNC), which lacks the Cu dopant, CuCo alloy nanoparticles (NPs) are contained by the Cu dopant within the carbonaceous matrix, giving CuCoNC more prominent electrochemical properties and larger porous structures and highly nitrogen moieties. CuCoNC, as a result, has a significantly higher capability compared to CoNC and Co3O4 NPs, for Oxone activation to degrade a toxic contaminant, Rhodamine B (RDMB). Furthermore, CuCoNC+Oxone has a smaller activation energy for RDMB elimination and maintains its superior effectiveness for removing RDMB in various water conditions. The computational chemistry insights have revealed the RDMB degradation mechanism. This study reveals that CuCoNC is a useful activator for Oxone to eliminate RDMB.

Toluene decomposition by non-thermal plasma assisted CoOx - γ-Al2O3: The relative contributions of specific energy input of plasma, Co3+ and oxygen vacancy

Cobalt oxide (CoO_x) is a common catalyst for plasma catalytic elimination of volatile organic compounds (VOCs). However, the catalytic mechanism of CoO_x under radiation of plasma is still unclear, such as how the relative importance of the intrinsic structure of the catalyst (e.g., Co³⁺ and oxygen vacancy) and the specific energy input (SEI) of the plasma for toluene decomposition performance. CoO_x - γ-Al₂O₃ catalysts were prepared and evaluated by toluene decomposition performance. Changing the calcination temperature of the catalyst altered the content of Co³⁺ and oxygen vacancies in CoO_x, resulting in different catalytic performance. The results of the artificial neural network (ANN) models presented that the relative importance of three reaction parameters (SEI, Co³⁺, and oxygen vacancy) on the mineralization rate and CO₂ selectivity were as follows: SEI > oxygen vacancy > Co³⁺ , and SEI > Co³⁺ > oxygen vacancy, respectively. Oxygen vacancy is essential for mineralization rate, and CO₂ selectivity is more dependent on Co³⁺ content. Furthermore, a possible reaction mechanism of toluene decomposition was proposed according to the analysis results of in-situ DRIFTS and PTR-TOF-MS. This work provides new ideas for the rational design of CoO_x catalysts in plasma catalytic systems.

Nano-Dimensional Carbon Nanosphere Supported Non-Precious Metal Oxide Composite: A Cathode Material for Sea Water Reduction

Generation of hydrogen fuel at cathode during the electrolysis of seawater can be economically beneficial considering the vast availability of the electrolyte although it faces sluggishness caused by the anode reactions. In this regard a carbon nanosphere-protected CuO/Co₃O₄ (CCuU) composite was synthesized through heat treatment and was used as the cathode material for electrocatalytic seawater splitting. CCuU showed a significantly low overpotential of 73 mV@10 mA cm^-2, Tafel slope of 58 mV dec^-1 and relatively constant activity and morphology over a long time electrocatalytic study. A synergy within metal oxide centers was observed that boosted the proton-electron transfer at the active site. Moreover, the presence of carbon support increased the electroactive surface area and stability of the composite. The activity of the CCuU was studied for HER in KOH and alkaline NaCl solution to understand the activity. This work will pave the way for designing mesoporous non-precious electrocatalysts towards seawater electrocatalysis.

Synthesis of Co3O4 Nanoparticles-Decorated Bi12O17Cl2 Hierarchical Microspheres for Enhanced Photocatalytic Degradation of RhB and BPA

Three-dimensional (3D) hierarchical microspheres of Bi₁₂O₁₇Cl₂ (BOC) were prepared via a facile solvothermal method using a binary solvent for the photocatalytic degradation of Rhodamine-B (RhB) and Bisphenol-A (BPA). Co₃O₄ nanoparticles (NPs)-decorated BOC (Co₃O₄/BOC) heterostructures were synthesized to further enhance their photocatalytic performance. The microstructural, morphological, and compositional characterization showed that the BOC microspheres are composed of thin (~20 nm thick) nanosheets with a 3D hierarchical morphology and a high surface area. Compared to the pure BOC photocatalyst, the 20-Co₃O₄/BOC heterostructure showed enhanced degradation efficiency of RhB (97.4%) and BPA (88.4%). The radical trapping experiments confirmed that superoxide (^•O₂^-) radicals played a primary role in the photocatalytic degradation of RhB and BPA. The enhanced photocatalytic performances of the hierarchical Co₃O₄/BOC heterostructure are attributable to the synergetic effects of the highly specific surface area, the extension of light absorption to the more visible light region, and the suppression of photoexcited electron-hole recombination. Our developed nanocomposites are beneficial for the construction of other bismuth-based compounds and their heterostructure for use in high-performance photocatalytic applications.