Dust from Zambian smelters: mineralogy and contaminant bioaccessibility

Metal-bearing airborne particles from mining activities: A review on their characteristics, impacts and research perspectives

The presence of various contaminants in airborne dusts from metal mining sites poses obvious risks to human health and the environment. Yet, few studies have thoroughly investigated the properties of airborne particles in terms of their morphology, size distribution and chemical composition, that are associated with health effects around mining activities. This review presents the most recent knowledge on the sources, physicochemical characteristics, and health and environmental risks associated with airborne dusts from various mining and smelting operations. The literature reviewed found only one research on atmospheric dust associated with hydrometallurgical plants compared to a larger number of pyrometallurgical processes/smelters studies. In addition, there are relatively few works comparing the distribution of metals between the fine and coarse size fractions around mining sites. Our analysis suggests that (i) exposure pathways of metal(loid)s to the human body are defined by linking concentration data in human biosamples and contaminated samples such as soils, drinking water and food, and (ii) chitosan and its derivatives may serve as an environmentally friendly and cost-effective method for soil remediation, with removal rates for metal(loid)s around 70-95 % at pH 6-8, and as dust suppressants for unpaved roads around mining sites. The specific limit values for PM and metal(loid)s at mining sites are not well documented. Despite the health risks associated with fine particles around mining areas, regulations have tended to focus on coarse particles. While some air quality agencies have issued regulations for occupational health and safety, there is no global alignment or common regulatory framework for enforcement. Future research priorities should focus on investigating PM and secondary inorganic aerosols associated with hydrometallurgical processes and dust monitoring, using online metal(loid)s analysers to identify the driving parameters in the deposition and resuspension process.

Environmental and health implications of Pb-bearing particles in settled urban dust from an arid city affected by Pb-Zn factory emissions

Metal-rich particles originating from non-ferrous metallurgical activities are the primary source of atmospheric metals in urban environments. These particles vary in size, morphology, and elemental compositions and they undergo weathering processes that alter their composition and affect their toxicity. This study focuses on lead (Pb)-rich particles in settled urban dust within an arid and dusty city, Torreón in North Mexico, affected by Met-Mex Peñoles complex, one of the world's largest Ag-Cd-Pb-Zn smelting and refining facilities in operating since 1901. Torreón is characterized by arid conditions, temperature fluctuations, and low humidity. Dry atmospheric particles were collected in 2015 and 2017 from Torreón's urban area within a 3 km radius of the Met-Mex Peñoles complex. We used various analytical techniques, including scanning electron microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDS), and X-ray powder diffraction (XRD) to determine the size, morphology, elemental composition and mineralogy of Pb-bearing particles. Our analysis revealed a range of Pb-bearing particle sizes and morphologies with varying Pb (0.3 to 51-87.2%) and other element contents, such as As (0.04 to 1-3.4%), Cd (0.4 to 3.3-5.1%), Cu (0.51-14.1%), Hg (ND-0.6%), and Zn (1.7 to 79-90.3%). XRD analysis confirmed the presence of Pb and Zn sulfides, Pb carbonates, Pb sulfate, and Pb oxides in urban dust, both as individual particles and agglomerates. Primary Pb minerals were linked to fugitive feed concentrates and smelter flue gas at Met-Mex Peñoles, while secondary Pb minerals, like Pb carbonates, Pb sulfate, and Pb oxides, resulted from direct emissions and weathering processes. Compared to galena, secondary Pb minerals exhibit higher chemical availability in the environment, posing greater risks to the environment and human health. As the particles analyzed are presumed to be resuspended rather than freshly emitted by Met-Mex, the presence of secondary Pb minerals in settled urban dust is predominantly linked to weathering processes. The physical and chemical transformations in Pb-rich particles contribute to increased Pb bioavailability and toxicity in urban dust, with substantial implications for environmental and human health. These findings highlight the potential consequences of weathered Pb-rich particle in urban areas, particularly in the arid and dusty city of Torreón.

Bioaccessible metals in dust materials from non-sulfide Zn deposit and related hydrometallurgical operation

Mining and processing of ores in arid (desert) areas generates high amounts of dust, which might be enriched in potentially harmful elements. We studied dust fractions of ores, soils, and technological materials from mining and related hydrometallurgical operation at former Skorpion Zinc non-sulfide Zn deposit in southern Namibia (closed and placed under maintenance in 2020). Chemical and mineralogical investigation was combined with oral bioaccessibility testing of fine dust fractions (<48 μm and <10 μm) in simulated gastric fluid (SGF) to assess potential risk of intake of metallic contaminants (Cd, Cu, Pb, Zn) for staff operating in the area. The bulk metals concentrations were largely variable and ranked as follows: soils < tailings ≪ Skorpion ores < imported ores and dross used for feed ore blending. Maximum contaminant concentrations in the original granular materials were 927 mg Cd/kg, 9150 mg Cu/kg, 50 g Pb/kg and 706 g Zn/kg, respectively, and generally increased as a function of decreasing grain size. The highest bioaccessible concentrations of Cd and Pb yielded imported ores from Taiwan and Turkey and, together with the milled dross, these samples also exhibited the highest Zn bioaccessibilities. The exposure estimates calculated for a worker (weighing 70 kg) in this mining/ore processing operation at a dust ingestion rate of 100 mg/day indicated that most dust samples (soils, tailings, Skorpion ores) exhibited metals intake values far below tolerable daily intake limits. The overall health risk was limited in all mining and ore processing areas except for the ore blending area, where imported ores and recycled dross enriched in bioaccessible Cd, Pb and/or Zn were used for the ore blending. Safety measures required by the mine operator (wearing of masks by the operating staff) helped to prevent the staff's exposure to potentially contaminated dust even in this blending ore area.

Narrative review of lead poisoning in humans caused by industrial activities and measures compatible with sustainable industrial activities in Republic of Zambia

Lead (Pb) pollution and human exposure to Pb, is an important issue for the international community to address being associated with 0.90 million deaths from long-term effects. The Republic of Zambia is a typical mineral resource-rich country, with long-standing mining and smelting activities of metals including Pb in several parts of the country. This narrative review provides a comprehensive overview of previous papers that have assessed human exposure to Pb and related health effects in Zambia. Environmental remediation methods that should be applied locally, ways to reduce Pb exposure of the population, and issues that need to be addressed by various sectors are discussed. Environmental remediation methods using locally available and affordable materials are needed to ensure both sustainable industrial activities and pollution prevention. In the Zambian mining towns, including Kabwe, various research activities have been conducted, including environmental monitoring, human biomonitoring and health impact assessments. The town of Kabwe, which was one of Zambia's largest Pb mining area in the 20th century, continues to have formal and informal Pb-related industries and is known as one of the most polluted areas in the world. For example, despite the World Health Organization asserting that "For an individual with a blood Pb concentration ≥ 5 μg/dL, appropriate action should be taken to terminate exposure", there are reports of blood Pb levels in Kabwe children exceeding 100 μg/dL. While Pb pollution is a global issue, not many places have such continuous and comprehensive research has been conducted, and there is much to be learned from the knowledge accumulated in these areas. Because the high levels of Pb accumulation in humans and the adverse health effects were clarified, we consider that it is important to combine mining activities, which are a key industry, with measures to prevent environmental pollution.

Contaminant Binding and Bioaccessibility in the Dust From the Ni-Cu Mining/Smelting District of Selebi-Phikwe (Botswana)

We studied the dust fractions of the smelting slag, mine tailings, and soil from the former Ni-Cu mining and processing district in Selebi-Phikwe (eastern Botswana). Multi-method chemical and mineralogical investigations were combined with oral bioaccessibility testing of the fine dust fractions (<48  and <10 μm) in a simulated gastric fluid to assess the potential risk of the intake of metal(loid)s contaminants. The total concentrations of the major contaminants varied significantly (Cu: 301-9,600 mg/kg, Ni: 850-7,000 mg/kg, Co: 48-791 mg/kg) but were generally higher in the finer dust fractions. The highest bioaccessible concentrations of Co, Cu, and Ni were found in the slag and mine tailing dusts, where these metals were mostly bound in sulfides (pentlandite, pyrrhotite, chalcopyrite). On the contrary, the soil dusts exhibited substantially lower bioaccessible fractions of these metals due to their binding in less soluble spinel-group oxides. The results indicate that slag dusts are assumed to be risk materials, especially when children are considered as a target group. Still, this exposure scenario seems unrealistic due to (a) the fencing of the former mine area and its inaccessibility to the local community and (b) the low proportion of the fine particles in the granulated slag dump and improbability of their transport by wind. The human health risk related to the incidental ingestion of the soil dust, the most accessible to the local population, seems to be quite limited in the Selebi-Phikwe area, even when a higher dust ingestion rate (280 mg/d) is considered.

Impact of smelter re-development on spatial and temporal airborne Pb concentrations

Total suspended particulate (TSP) and PM₁₀ filters collected from two ambient air monitoring stations in Port Pirie were analysed to determine the impact of a lead (Pb) smelter redevelopment on air quality parameters including total elemental concentration, Pb isotopic ratio, Pb bioaccessibility and Pb speciation. Filters from 2009 to 2020 were analysed with a focus on samples from 2017 (immediately prior to smelter redevelopment) and 2020 (post-smelter redevelopment). Lead concentration in 2009-2020 TSP was variable ranging up to 6.94 μg m^-3 (mean = 0.57 μg m^-3), however, no significant decrease in Pb concentration was observed at either Port Pirie West (p = 0.56, n = 34) or Oliver Street (p = 0.32, n = 28) monitoring stations when 2017 and 2020 TSP values were compared. Similarly, no significant difference (p = 0.42) in PM₁₀ Pb concentration was observed in 2017 (mean = 0.80 μg m^-3) and 2020 (0.60 μg m^-3) Oliver Street filters. Although no change in percentage Pb bioaccessibility was observed when 2017 and 2020 Port Pirie West TSP samples were compared (mean of 88.7% versus 88.0%), Pb bioaccessibility was lower (p < 0.005) in both 2020 TSP (mean of 83.9% versus 62.9%) and PM₁₀ (mean of 70.8% versus 58.3%) Oliver Street filters compared to 2017. While scanning electron microscopy, energy dispersive x-ray spectroscopy identified a number of Pb phases within filters (galena, anglesite, cerussite, conglomerates), differences in Pb speciation between 2017 and 2020 filters could not be identified although it was presumed that this influenced Pb bioaccessibility outcomes at Oliver Street. Data from this study suggests that recent smelter redevelopments have not significantly decreased the concentrations of airborne Pb in Port Pirie although re-entrainment of soil-Pb from historical impact may also be a contributing Pb source.

The role of organic colloids in the sequestration and mobilization of copper in smelter-impacted soils

This study shows that Cu occurs predominantly as Cu-sulfides and Cu-bearing phosphates and -carbonates in organic matter (OM) colloids within smelter-impacted soils in which they are often associated with other inorganic components. Major emitters of Cu are smelters and coal-power plants, which cause severe damage to the health of soils and aquatic systems as elevated Cu concentrations are toxic for terrestrial and aquatic organisms. Toxic effects and the long-term environmental fate of Cu depend among many other factors on its speciation in soil and water bodies. This study explores the role of OM colloids (defined as particles with diameters in the range of 100 to 1000 nm and with a larger proportion of organic than inorganic material) in the sequestration of Cu in contaminated soils around the Horne smelter, Rouyn Noranda, Quebec, Canada, focusing on a thin soil overlying bedrock (bedrock soil) and forest soil. The sequestration and mobilization of Cu by OM colloids are studied using a combination of column leaching experiments, ultra-centrifugation and transmission electron microscopy (TEM). TEM analysis indicates that Cu occurs as nano-sized CuS_x phases in OM colloids of the bedrock soil, and as Cu-bearing Ca-Mg-phosphates and Ca-carbonates in OM colloids of the forest soil. The nano-sized CuS_x phases occur along the rim of OM colloids or are attached to silica inclusions located within OM colloids, suggesting that their in situ formation is strongly controlled by the presence of polar groups within or on the surface of OM colloids. The proportion of Cu-bearing colloids in the soil leachates ranges from 20 to 40% of the total colloidal fraction, suggesting that OM colloids can play a significant role in the sequestration of Cu in surficial soil environments.

Impacts of Surface Water on Windborne Lead Dispersion from the Zinc Plant Leach Residue in Kabwe, Zambia

Effects of the water content of ground surface on windborne lead (Pb) dispersion from the zinc (Zn) leach residue site at the Kabwe mine, Zambia, were simulated. The Pb-bearing Zn plant leach residue site was selected as the source of the dispersion, and water conditions of the surface of the source were evaluated by the modified normalized difference water index (MNDWI) under the actual weather conditions in the year 2019. The MNDWI was calculated based on Sentinel-2 datasets, which were acquired in the year 2019. The index was used for monitoring the surface condition of the source necessary for simulating Pb dispersion, because the higher surface water content reduces the intensity of windborne source. The results showed that the wind speeds and directions had huge impacts on Pb dispersion when the MNDWI had negative values, and that the dispersion was inhibited when the MNDWI had positive values. These indicate that the water content of the surface is sensitive to dispersion, and that MNDWI is an effective parameter that expresses the source strength.

Evaluation of Dispersion of Lead-Bearing Mine Wastes in Kabwe District, Zambia

Dispersion of lead (Pb) in mine wastes was simulated for reproducing Pb contamination of soil in Kabwe District, Zambia. Local weather data of year 2019 were monitored in situ and used for the simulations. The plume model, weak puff model, and no puff model were adopted for calculation of Pb dispersion under different wind conditions. The results showed that Pb dispersion from the Kabwe mine was directly affected by wind directions and speeds in the dry season, although it was not appreciably affected in the rainy season. This may be because the source strength is lower in the rainy season due to higher water content of the surface. This indicates that Pb dispersion patterns depend on the season. In addition, the distribution of the amount of deposited Pb-bearing soils around the mine corresponded to the distribution of Pb contents in soils. These results suggest that Pb contamination in soils primarily results from dispersion of fine mine wastes.

Co-treatment of copper smelting flue dust and arsenic sulfide residue by a pyrometallurgical approach for simultaneous removal and recovery of arsenic

As the typical hazardous arsenic pollutants, copper smelting flue dust (CSFD) and arsenic sulfide residue (ASR) are produced extensively during copper smelting process, which pose significant pressure on environmental protection and green development of the copper industry. This work proposed an economic, efficient, and applicable approach to treat waste with waste, in which the simultaneous removal and recovery of As from CSFD and ASR were realized by a roasting process, with adding sulfuric acid, at a relatively low temperature (300-350 ℃). The thermodynamic analysis and experiments confirmed that the main phases of As₂S₃ and S₀ in the ASR were used as a reductant for reducing As(Ⅴ) in the CSFD, and the introduction of sulfuric acid favorably enhanced the thermodynamic driving force and greatly lowered the reaction temperature. The results indicated that removal and behavior of As were highly dependent on the mass ratio of ASR to CSFD, roasting temperature, and H₂SO₄ dosage. By regulating the parameters, the species As₂S₃, As₂O₅, and arsenate were all converted to volatile As₂O₃, which could be captured and deposited in cold water. In the optimized co-treatment, a satisfied As removal efficiency of 96.12% was achieved, while getting the 97.03% pure As₂O₃.

Mechanochemical activation on selective leaching of arsenic from copper smelting flue dusts

A novel application, including mechanochemical pre-treating and alkali leaching, for arsenic selective leaching from copper smelter flue dusts (CSFUs) was developed to overcome the disadvantages of hydrometallurgical methods. Compared with raw CSFU powders, the mechanical-activated ones showed higher maximum arsenic leaching efficiency (increased by ~20%), and lower apparent activation energy (decreased by ~7 kJ·mol^-1). Furthermore, this novel process only consumed half of alkali and sulfides and needed one-third of the leaching time to compare with the ones used in the traditional alkali leaching process. The promoting effect of mechanical force on arsenic leaching firstly relied on the physical property changes of CSFU powders, including a decrease of particle sizes and an increase of the specific surface. Secondly, mechanochemical force converted As⁵⁺ species into reduced phases (e.g. As₂O₃, NaAsO₂), and thio-arsenates (e.g. AsO₂S₂^3-, AsO₃S^3-), which could spur its leaching due to their stronger mobilities in the alkali solution within sulfides. Finally, mechanochemical activation could be facilitated to separate discrete soluble arsenic species or incorporated ones from sulfate minerals in the CSFUs. This work may have important implications for the development of new eco-friendly technologies for purifying arsenic-bearing materials.

Efficient removal and recovery of arsenic from copper smelting flue dust by a roasting method: Process optimization, phase transformation and mechanism investigation

The efficient removal and recovery of arsenic from copper smelting flue dust have received widespread attention due to its extremely high toxicity and carcinogenicity. In this research, a roasting method used for treating the dust at a relatively low temperature (300-400 ℃), with adding sulfuric acid and bitumite, was proposed, in which the reduction of As(Ⅴ) and oxidation of arsenic sulfides were achieved simultaneously. It was proved by thermodynamic analysis and experiments that adding sulfuric acid was favorable for the removal of arsenic, through enhancing the thermodynamic driving force and promoting the transformation of arsenate and arsenic sulfides to As₂O₃. The phase transformation of arsenic was analyzed using XRD, SEM-EDS and XPS, which indicated that coal addition, roasting temperature and H₂SO₄ dosage play essential roles in arsenic removal. Based on the lab-scale experiments, the optimal conditions for arsenic removal were found to be at the roasting temperature of 300-400 °C, roasting time of 2-3 h, coal addition of 5% and H₂SO₄ dosage of 0.2-0.3 mL/g. Around 98% of arsenic was volatilized from the dust, while arsenic content in the residue was decreased to 0.57%. Eventually, arsenic was recovered as As₂O₃ with a high purity of 99.05%.

Bioaccessibility of potentially toxic elements in mine residue particles

Mining companies used to abandon tailing heaps in countryside regions of Mexico and other countries. Mine residues (MRs) contain a high concentration of potentially toxic elements (PTE). The wind can disperse dust particles (<100 μm) and once suspended in the atmosphere, can be ingested or inhaled; this is a common situation in arid climates. Nowadays, there is little information on the risk of exposure to PTEs from particulate matter dispersed by wind. The pseudo-total PTE in bulk and fractionated MR after aqua regia digestion, the inhalable bioaccessibility with Gamble solution (pH = 7.4), and the gastric bioaccessibility with 0.4 M glycine solution at pH 1.5 were determined. As and Pb chemical species were identified by X-ray absorption near-edge structure (XANES) spectroscopy. The highest rate of dispersion was observed with 74-100 μm particles (104 mg m-2 s-1); in contrast, particles <44 μm had the lowest rate (26 mg m-2 s-1). The highest pseudo-total As (35 961 mg kg-1), Pb (3326 mg kg-1), Cd (44 mg kg-1) and Zn (up to 4678 mg kg-1) concentration was in the <20 μm particles and As in the 50-74 μm (40 236 mg kg-1) particles. The highest concentration of inhaled bioaccessible As (343 mg kg-1) was observed in the <20 μm fraction and the gastric bioaccessible As was 744 mg kg-1, Pb was 1396 mg kg-1, Cd was 19.2 mg kg-1, and Zn was 2048 mg kg-1. The predominant chemical As species was arsenopyrite (92%), while 54% of Pb was in the adsorbed form. Erodible particle matter is a potential risk for humans in case of inhalation or ingestion.

Slag dusts from Kabwe (Zambia): Contaminant mineralogy and oral bioaccessibility

The former Pb-Zn mining town of Kabwe in central Zambia is ranked amongst the worst polluted areas both in Africa and in the world. The fine dust particles from the ISF and Waelz slags deposited in Kabwe represent a health risk for the local population. Here, we combined a detailed multi-method mineralogical investigation with oral bioaccessibility testing in simulated gastric fluid (SGF; 0.4 M glycine, pH 1.5, L/S ratio of 100, 1 h, 37 °C) to evaluate the risk related to the incidental dust ingestion. The slag dust fractions contain up to 2610 mg/kg V, 6.3 wt% Pb and 19 wt% Zn. The metals are mainly bound in a slag glass and secondary phases, which formed during the slag weathering or were windblown from nearby tailing stockpiles (carbonates, Fe and Mn oxides, phosphates, vanadates). The bioaccessible fractions (BAFs) are rather high for all the main contaminants, with the BAF values generally higher for the ISF slags than for the Waelz slags: Pb (24-96%), V (21-100%) and Zn (54-81%). The results clearly indicate the potential risks related to the incidental slag dust ingestion. Even when a conservative value of the dust daily intake (100 mg/day) is considered, the daily contaminant intake significantly exceeds the tolerable daily intake limits, especially for Pb ≫ V > Zn. At higher ingestion rates, other minor contaminants (As, Cd) also become a health risk, especially for children. The slag heaps in Kabwe should be fenced to prevent local people entering and should be covered to limit the dust dispersion.

Lead source and bioaccessibility in windowsill dusts within a Pb smelting-affected area

Windowsill, heavy metal-containing dust samples, collected at different building heights, may provide some insight into both source and human health risk. Windowsill dust samples were collected from the 1st to 9th floor (1.4-23.2 m above ground) near a lead smelter (1 km to the smelter) and in urban areas (4.2-7.3 km to the smelter) and separated into <10, 10-45 and 45-125 μm size fractions. Samples were extracted with artificial lysosomal fluid (ALF) and the physiologically based extraction test (PBET) (<10 μm fractions only), subjected to scanning electron microscopy-energy dispersive x-ray spectroscopy (SEM-EDS) and Pb isotopic analysis. Greater Pb concentrations were found in 10-45 μm fraction than the other size fractions; at the PX site, dust Pb concentrations increased with windowsill height, while an opposite trend was found at other sites. Isotopic analysis and SEM-EDS results supported this contention. Higher floor samples collected near the smelter were more affected by lead smelting than lower floor samples; lower floor samples collected at urban sites were more affected by resuspended Pb-laden particles from the ground than higher floors. The Pb bioaccessible fraction (BAF) in the ALF and PBET ranged between 68.9-90.1 and 1.3-17.0%, respectively; urban samples had greater BAF values than samples collected near the smelter. This, first of its kind investigation regarding Pb in dusts at different building heights, provides further insight for reducing human health risks within Pb smelter vicinities.

Bioaccessibilities of metal(loid)s and organic contaminants in particulates measured in simulated human lung fluids: A critical review

Particle-bound pollutants can pose a health risk to humans. Inhalation exposure evaluated by total contaminant concentrations significantly overestimates the potential risk. To assess the risk more accurately, bioavailability, which is the fraction that enters into the systemic circulation, should be considered. Researchers have replaced bioavailability by bioaccessibility due to the rapid and cost-efficient measurement for the latter, especially for assessment by oral ingestion. However, contaminants in particulates have different behavior when inhaled than when orally ingested. Some of the contaminants are exhaled along with exhalation, and others are deposited in the lung with the particulates. In addition, a fraction of the contaminants is released into the lung fluid and absorbed by the lung, and another fraction enters systemic circulation under the action of cell phagocytosis on particulates. Even if the release fraction, i.e., release bioaccessibility, is considered, the measurement faces many challenges. The present study highlights the factors influencing release bioaccessibility and the incorporation of inhalation bioaccessibility into the risk assessment of inhaled contaminants. Currently, there are three types of extraction techniques for simulated human lung fluids, including simple chemical solutions, sequential extraction techniques, and physiologically based techniques. The last technique generally uses three kinds of solution: Gamble's solution, Hatch's solution, and artificial lysosomal fluid, which are the most widely used physiologically based simulated human lung fluids. External factors such as simulated lung fluid composition, pH, extraction time, and sorption sinks can affect release bioaccessibility, whereas particle size and contaminant properties are important internal factors. Overall, release bioaccessibility is less used than bioaccessibility considering the deposition fraction when assessing the risk of contaminants in inhaled particulates. The release bioaccessibility measurement poses two main challenges: developing a unified, accurate, stable, simple, and systematic biologically based method, and validating the method through in-vivo assays.

Health risk assessment of metal(loid)s in soil and particulate matter from industrialized regions: A multidisciplinary approach

In this study, samples of soil and particulate matter obtained from the highly industrialized region of Ostrava, Czech Republic, are used for the toxicity evaluation of the selected metal(loid)s (Cd, Cr, Cu, Ni, Pb, Zn, As). We investigated the samples from sites supposedly affected the most by the local pollution sources using mineralogical techniques (XRD, SEM/EDS) to understand the solid speciation of the contaminants as the crucial factor affecting their release. Although the bulk composition was defined by common silicates and oxides that are rather resistant to leaching, the presence of tiny Ni, Pb, and/or Zn sulfate-like droplets indicated a potential increase of the solubility of these metals. In vitro tests simulating gastric and lung fluids were used to assess the exposure risk for humans, as well as metal(loid) bioaccessibility. Based on the results, the potential risk for the observed age group (3-year-old children) could be recognized, particularly in the cases of As, Pb and Cd for both oral and inhalation exposure. Arsenic exhibits high bioaccessibility (7.13-79.7%, with the median values of 10.6 and 15.6 for SGL and SLF, respectively), high daily intake (1.4- to 8.5-fold higher than the tolerable daily intake) and high concentrations in atmospheric PM₁₀ (2.5 times the tolerable concentration in air). In contrast, Ni exceeded tolerable concentrations in the atmosphere up to 20-fold, but its bioaccessibility remained relatively low (0.1-22%), and Ni did not pose a major threat to human health. Cadmium, Pb and As originating from industrial activities and domestic heating have been suggested to be the most important pollutants (tolerable daily intake was exceeded by up to 74-, 34- and 8-fold for Cd, Pb and As, respectively).

Metal bioaccessibility, particle size distribution and polydispersity of playground dust in synthetic lysosomal fluids

Inhalation of playground dust-derived fine particles in schoolyards poses a risk from exposure to metal(oids) and minerals. In this work, we obtained the total concentration and bioaccessibility of metal(oids) with Gamble Solution (GS) and Artificial Lysosomal Fluid (ALF) synthetic solutions, simulating the extracellular neutral pH environment of the lung and the intracellular conditions of the macrophage, respectively. Scanning Electron Microscope (SEM), and Dynamic Light Scattering analysis (DLS) techniques were used to characterize particles with a size smaller than 2.5 μm, which can be assimilated by macrophages in the deep part of the lung. Arsenic (As), lead (Pb), copper (Cu), manganese (Mn), zinc (Zn), and iron (Fe) showed concentrations of 39.9, 147.9, 286, 1369, 2313, 112,457 mg·kg^-1, respectively. The results indicated that all studied elements were enriched when compared to (i) local geochemical background and (ii) findings reported in other cities around the world. Bioaccessibility of metal(oids) in GS was low-moderate for most studied elements. However, in ALF assays, bioaccessibility was high among the samples: for lead (Pb = 34-100%), arsenic (As = 14.7-100%), copper (Cu = 17.9-100%), and zinc (Zn = 35-52%) possibly related to hydrophobic minerals in dust. SEM and DLS image analysis showed that playground dust particles smaller than 2.5 μm are dominant, particularly particles with a size range of 500-600 nm. The polydispersity detected in these particle sizes showed that most of them might be crystalline compounds (elongated shapes) forming agglomerates instead of combustion particles (spheres). Moreover, the circularity detected varies from 0.57 to 0.79 (low roundness), which corroborates this finding. The presence of agglomerates of ultrafine/nanoparticles containing highly bioaccessible metals in playground sites may have severe implications in children's health. Therefore, further studies are required to characterize the size distribution, structure, shape and composition of such minerals which are essential factors related to the toxicology of inhaled dust particles.

Oral bioaccessibility of metal(loid)s in dust materials from mining areas of northern Namibia

Ore mining and processing in semi-arid areas is responsible for the generation of metal(loid)-containing dust, which is easily transported by wind to the surrounding environment. To assess the human exposure to dust-derived metal(loid)s (As, Cd, Cu, Pb, Sb, Zn), as well as the potential risks related to incidental dust ingestion, we studied mine tailing dust (n = 8), slag dust (n = 5) and smelter dust (n = 4) from old mining and smelting sites in northern Namibia (Kombat, Berg Aukas, Tsumeb). In vitro bioaccessibility testing using extraction in simulated gastric fluid (SGF) was combined with determination of grain-size distributions, chemical and mineralogical characterizations and leaching tests conducted on original dust samples and separated PM₁₀ fractions. The bulk and bioaccessible concentrations of the metal(loid)s were ranked as follows: mine tailing dusts < slag dusts ≪ smelter dusts. Extremely high As and Pb bioaccessibilities in the smelter dusts were caused by the presence of highly soluble phases such as arsenolite (As₂O₃) and various metal-arsenates unstable under the acidic conditions of SGF. The exposure estimates calculated for an adult person of 70 kg at a dust ingestion rate of 50 mg/day indicated that As, Pb (and also Cd to a lesser extent) grossly exceeded tolerable daily intake limits for these contaminants in the case of slag and smelter dusts. The high risk for smelter dusts has been acknowledged, and the safety measures currently adopted by the smelter operator in Tsumeb are necessary to reduce the staff's exposure to contaminated dust. The exposure risk for the local population is only important at the unfenced disposal sites at Berg Aukas, where the PM₁₀ exhibited high levels of bioaccessible Pb.

Oral bioaccessibility of inorganic contaminants in waste dusts generated by laterite Ni ore smelting

The laterite Ni ore smelting operations in Niquelândia and Barro Alto (Goiás State, Brazil) have produced large amounts of fine-grained smelting wastes, which have been stockpiled on dumps and in settling ponds. We investigated granulated slag dusts (n = 5) and fly ash samples (n = 4) with a special focus on their leaching behaviour in deionised water and on the in vitro bioaccessibility in a simulated gastric fluid, to assess the potential exposure risk for humans. Bulk chemical analyses indicated that both wastes contained significant amounts of contaminants: up to 2.6 wt% Ni, 7580 mg/kg Cr, and 508 mg/kg Co. In only one fly ash sample, after 24 h of leaching in deionised water, the concentrations of leached Ni exceeded the limit for hazardous waste according to EU legislation, whereas the other dusts were classified as inert wastes. Bioaccessible fractions (BAF) of the major contaminants (Ni, Co, and Cr) were quite low for the slag dusts and accounted for less than 2 % of total concentrations. In contrast, BAF values were significantly higher for fly ash materials, which reached 13 % for Ni and 19 % for Co. Daily intakes via oral exposure, calculated for an adult (70 kg, dust ingestion rate of 50 mg/day), exceeded neither the tolerable daily intake (TDI) nor the background exposure limits for all of the studied contaminants. Only if a higher ingestion rate is assumed (e.g. 100 mg dust per day for workers in the smelter), the TDI limit for Ni recently defined by European Food Safety Authority (196 µg/day) was exceeded (324 µg/day) for one fly ash sample. Our data indicate that there is only a limited risk to human health related to the ingestion of dust materials generated by laterite Ni ore smelting operations if appropriate safety measures are adopted at the waste disposal sites and within the smelter facility.

A novel two-step sequential bioaccessibility test for potentially toxic elements in inhaled particulate matter transported into the gastrointestinal tract by mucociliary clearance

A novel two-step sequential extraction has been developed to assess the bioaccessibility of As, Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn in airborne particulate matter following inhalation and transport into the human gastrointestinal tract by mucociliary clearance. A new artificial mucus fluid (AMF) was used to determine the bioaccessible potentially toxic element (PTE) fraction in the upper airways, in sequence with the simplified bioaccessibility extraction test (SBET) or the stomach phase of the unified bioaccessibility method (gastric fluid only) (UBMG). Filter dynamic measurement system TX40 filters smeared with soil reference material (BGS RM 102) were used as test samples. Analysis was performed by ICP-MS. Comparison between results obtained for soil alone and when the soil was supported on TX40 filters indicated that the presence of the substrate did not affect the extraction efficiency, although a large Zn blank was detected. The sequential AMF→SBET extraction liberated similar amounts of Fe, Mn, Ni and Zn to the SBET alone; but significantly less Cd; and significantly more As, Cr, Cu and Pb. The sequential AMF→UBMG extraction liberated similar amounts of Cd, Cr, Mn and Zn to the UBMG alone, but significantly less As, Fe and Ni; and significantly more Cu and Pb. Enhanced extractability was due to the greater quantities of exchangeable ions and complexing agents present. Adoption of a two-step sequential extraction (AMF followed by either the SBET or the UBMG) is recommended because it is more representative of biological conditions and avoids overestimation or underestimation of bioaccessible PTE concentrations.

Graphical Abstract

A critical review of approaches and limitations of inhalation bioavailability and bioaccessibility of metal(loid)s from ambient particulate matter or dust

Inhalation of metal(loid)s in ambient particulate matter (APM) represents a significant exposure pathway to humans. Although exposure assessment associated with this pathway is currently based on total metal(loid) content, a bioavailability (i.e. absorption in the systemic circulation) and/or bioaccessibility (i.e. solubility in simulated lung fluid) based approach may more accurately quantify exposure. Metal(loid) bioavailability-bioaccessibility assessment from APM is inherently complex and lacks consensus. This paper reviews the discrepancies that impede the adoption of a universal protocol for the assessment of inhalation bioaccessibility. Exposure assessment approaches for in-vivo bioavailability, in-vitro cell culture and in-vitro bioaccessibility (composition of simulated lungs fluid, physico-chemical and methodological considerations) are critiqued in the context of inhalation exposure refinement. An important limitation of bioavailability and bioaccessibility studies is the use of considerably higher than environmental metal(loid) concentration, which diminishing their relevance to human exposure scenarios. Similarly, individual metal(loid) studies have been criticised due to complexities of APM metal(loid) mixtures which may impart synergistic or antagonistic effects compared to single metal(loid) exposure. Although a number of different simulated lung fluid (SLF) compositions have been used in metal(loid) bioaccessibility studies, information regarding the comparative leaching efficiency among these different SLF and comparisons to in-vivo bioavailability data is lacking. In addition, the particle size utilised is often not representative of what is deposited in the lungs while assay parameters (extraction time, solid to liquid ratio, temperature and agitation) are often not biologically relevant. Research needs are identified in order to develop robust in-vitro bioaccessibility protocols for the assessment or prediction of metal(loid) bioavailability in APM for the refinement of inhalation exposure.

Composition and fate of mine- and smelter-derived particles in soils of humid subtropical and hot semi-arid areas

We studied the heavy mineral fraction, separated from mining- and smelter-affected topsoils, from both a humid subtropical area (Mufulira, Zambian Copperbelt) and a hot semi-arid area (Tsumeb, Namibia). High concentrations of metal(loid)s were detected in the studied soils: up to 1450mgAskg(-1), 8980mgCukg(-1), 4640mgPbkg(-1), 2620mgZnkg(-1). A combination of X-ray diffraction analysis (XRD), scanning electron microscopy (SEM/EDS), and electron probe microanalysis (EPMA) helped to identify the phases forming individual metal(loid)-bearing particles. Whereas spherical particles originate from the smelting and flue gas cleaning processes, angular particles have either geogenic origins or they are windblown from the mining operations and mine waste disposal sites. Sulphides from ores and mine tailings often exhibit weathering rims in contrast to smelter-derived high-temperature sulphides (chalcocite [Cu2S], digenite [Cu9S5], covellite [CuS], non-stoichiometric quenched Cu-Fe-S phases). Soils from humid subtropical areas exhibit higher available concentrations of metal(loids), and higher frequencies of weathering features (especially for copper-bearing oxides such as delafossite [Cu(1+)Fe(3+)O2]) are observed. In contrast, metal(loid)s are efficiently retained in semi-arid soils, where a high proportion of non-weathered smelter slag particles and low-solubility Ca-Cu-Pb arsenates occur. Our results indicate that compared to semi-arid areas (where inorganic contaminants were rather immobile in soils despite their high concentrations) a higher potential risk exists for agriculture in mine- and smelter-affected humid subtropical areas (where metal(loid) contaminants can be highly available for the uptake by crops).

Bioaccessibility of heavy metals in soils cannot be predicted by a single model in two adjacent areas

The objective of this study was to examine whether a single model could be used to predict the bioaccessibility of heavy metals in soils in two adjacent areas and to determine the feasibility of using existing data sets of total metal concentrations and soil property parameters (e.g., pH, total organic carbon, and soil texture) when predicting heavy metal bioaccessibility. A total of 103 topsoil samples were collected from two adjacent areas (Baotou and Bayan Obo). A total of 76 samples were collected from Baotou, and 27 were collected from Bayan Obo. The total and bioaccessible concentrations of arsenic (As), copper (Cu), lead (Pb), and zinc (Zn) were measured following complete composite acid digestion and a simple bioaccessibility extraction test. The average total concentrations of As, Cu, Pb, and Zn were 8.95, 27.53, 28.40, and 79.50 mg/kg, respectively, in Baotou and 18.12, 30.75, 38.09, and 87.62 mg/kg in Bayan Obo. Except for As, these values were similar in both areas. The average bioaccessible heavy metal concentrations (Bio-HMs) for each target HM were also similar. In Baotou, the average Bio-HM values for As, Cu, Pb, and Zn were 1.16, 3.76, 16.31, and 16.10 mg/kg, respectively, and 1.26, 2.51, 14.31, and 8.68 mg/kg in Bayan Obo. However, the relative bioaccessibilities for each HM in Baotou were greater than those in Bayan Obo, with mean values for Pb, Zn, Cu, and As of 57, 20, 17, and 12 %, respectively, in Baotou and 40, 11, 9, and 8 % in Bayan Obo. In both areas, prediction models were successfully created using heavy metal concentrations and soil physicochemical parameters; however, models of the same target element differed between the areas, which indicated that a common model for both sites does not exist. Bio-HMs were highly affected by soil properties, which were found to differ between the adjacent areas. In addition, soil properties with large variations played major roles in the predictive models. This study highlights the importance of incorporating physical and chemical parameters that vary greatly when building predictive models of heavy metal bioaccessibility in soil. A similarity in soil properties between areas might be a prerequisite for the creation of a common predictive model for soil Bio-HMs.