Electrocatalytic dechlorination of polychloroethylenes at silver cathode

Electrochemical reductive remediation of trichloroethylene contaminated groundwater using biomimetic iron-nitrogen-doped carbon

Electrochemical dechlorination is a prospective strategy to remediate trichloroethylene (TCE)-contaminated groundwater. In this work, iron-nitrogen-doped carbon (FeNC) mimicking microbiological dechlorination coenzymes was developed for TCE removal under environmentally related conditions. The biomimetic FeNC-900, FeNC-1000, and FeNC-1100 materials were synthesized via pyrolysis at different temperatures (900, 1000, and 1100 °C). Due to the synergistic effect of Fe-N₄ active sites and graphitic N sites, FeNC-1000 had the highest electron transfer efficiency and the largest electrochemical active surface area among the as-synthesized FeNC catalysts. The pseudo-first-order rate constants for TCE reduction using FeNC-1000 catalyst are 0.19, 0.28 and 0.36 h^-1 at potentials of -0.8 V, -1.0 V and -1.2 V, respectively. Active hydrogen and direct electrons transfer both contribute to the dechlorination from TCE to C₂H₄ and C₂H₆. FeNC maintain a high reactivity after five reuse cycles. Our study provides a novel approach for the dechlorination of chlorinated organic contaminants in groundwater.

Electrokinetics applied in remediation of subsurface soil contaminated with chlorinated ethenes - A review

Electrokinetics is being applied in combination with common insituremediation technologies, e.g. permeable reactive barriers, bioremediation and in-situ chemical oxidation, to overcome experienced limitations in remediation of chlorinated ethenes in low-permeable subsurface soils. The purpose of this review is to evaluate state-of-theart for identification of major knowledge gaps to obtain robust and successful field-implementations. Some of the major knowledge gaps include the behavior and influence of induced transient changes in soil systems, transport velocities of chlorinated ethenes, and significance of site-specific parameters on transport velocities, e.g. heterogeneous soils and hydrogeochemistry. Furthermore, the various ways of reporting voltage distribution and transport rates complicate the comparison of transport velocities across studies. It was found, that for the combined EK-techniques, it is important to control the pH and redox changes caused by electrolysis for steady transport, uniform distribution of the electric field etc. Specifically for electrokinetically enhanced bioremediation, delivery of lactate and biodegrading bacteria is of the same order of magnitude. This review shows that enhancement of remediation technologies can be achieved by electrokinetics, but major knowledge gaps must be examined to mature EK as robust methods for successful remediation of chlorinated ethene contaminated sites.

A CuNi bimetallic cathode with nanostructured copper array for enhanced hydrodechlorination of trichloroethylene (TCE)

To address the challenges of low hydrodechlorination efficiency by non-noble metals, a CuNi bimetallic cathode with nanostructured copper array film was fabricated for effective electrochemical dechlorination of trichloroethylene (TCE) in aqueous solution. The CuNi bimetallic cathodes were prepared by a simple one-step electrodeposition of copper onto the Ni foam substrate, with various electrodeposition time of 5/10/15/20 min. The optimum electrodeposition time was 10 min when copper was coated as a uniform nanosheet array on the nickel foam substrate surface. This cathode exhibited the highest TCE removal, which was twice higher compared to that of the nickel foam cathode. At the same passed charge of 1080C, TCE removal increased from 33.9 ± 3.3% to 99.7 ± 0.1% with the increasing operation current from 5 to 20 mA cm^-2, while the normalized energy consumption decreased from 15.1 ± 1.0 to 2.6 ± 0.01 kWh log^-1 m^-3. The decreased normalized energy consumption at a higher current density was due to the much higher removal efficiency at a higher current. These results suggest that CuNi cathodes prepared by simple electrodeposition method represent a promising and cost-effective approach for enhanced electrochemical dechlorination.

Acidification and sulfide formation control during reductive dechlorination of 1,2-dichloroethane in groundwater: Effectiveness and mechanistic study

To enhance the reductive dechlorination of 1,2-dichloroethane (DCA) in groundwater, substrate injection may be required. However, substrate biodegradation causes groundwater acidification and sulfide production, which inhibits the bacteria responsible for DCA dechlorination and results in an odor problem. In the microcosm study, the effectiveness of the addition of ferrous sulfate (FS), desulfurization slag (DS), and nanoscale zero-valent iron (nZVI) on acidification and sulfide control was studied during reductive dechlorination of DCA, and the emulsified substrate (ES) was used as the substrate. Up to 94% of the sulfide was removed with FS and DS addition (0.25 wt%) (initial DCA concentration = 13.5 mg/L). FS and DS amendments resulted in the formation of a metal sulfide, which reduced the hydrogen sulfide concentration as well as the subsequent odor problem. Approximately 96% of the DCA was degraded under reductive dechlorination with nZVI or DS addition using ES as the substrate. In microcosms with nZVI or DS addition, the sulfide concentration was reduced to less than 15 μg/L. Acidification can be controlled via hydroxide ions production after nZVI oxidation and reaction of free CaO (released from DS) with water, which enhanced DCA dechlorination. The quantitative polymerase chain reaction results confirmed that the microcosms with nZVI added had the highest Dehalococcoides population (up to 2.5 × 10(8) gene copies/g soil) due to effective acidification control. The α-elimination mechanism was the main abiotic process, and reductive dechlorination dominated by Dehalococcides was the biotic mechanism that resulted in DCA removal. More than 22 bacterial species were detected, and dechlorinating bacteria existed in soils under alkaline and acidic conditions.

The influence of cathode material on electrochemical degradation of trichloroethylene in aqueous solution

In this study, different cathode materials were evaluated for electrochemical degradation of aqueous phase trichloroethylene (TCE). A cathode followed by an anode electrode sequence was used to support reduction of TCE at the cathode via hydrodechlorination (HDC). The performance of iron (Fe), copper (Cu), nickel (Ni), aluminum (Al) and carbon (C) foam cathodes was evaluated. We tested commercially available foam materials, which provide large electrode surface area and important properties for field application of the technology. Ni foam cathode produced the highest TCE removal (68.4%) due to its high electrocatalytic activity for hydrogen generation and promotion of HDC. Different performances of the cathode materials originate from differences in the bond strength between atomic hydrogen and the material. With a higher electrocatalytic activity than Ni, Pd catalyst (used as cathode coating) increased TCE removal from 43.5% to 99.8% for Fe, from 56.2% to 79.6% for Cu, from 68.4% to 78.4% for Ni, from 42.0% to 63.6% for Al and from 64.9% to 86.2% for C cathode. The performance of the palladized Fe foam cathode was tested for degradation of TCE in the presence of nitrates, as another commonly found groundwater species. TCE removal decreased from 99% to 41.2% in presence of 100 mg L(-1) of nitrates due to the competition with TCE for HDC at the cathode. The results indicate that the cathode material affects TCE removal rate while the Pd catalyst significantly enhances cathode activity to degrade TCE via HDC.

Chlorinated volatile organic compounds (Cl-VOCs) in environment - sources, potential human health impacts, and current remediation technologies

Chlorinated volatile organic compounds (Cl-VOCs), including polychloromethanes, polychloroethanes and polychloroethylenes, are widely used as solvents, degreasing agents and a variety of commercial products. These compounds belong to a group of ubiquitous contaminants that can be found in contaminated soil, air and any kind of fluvial mediums such as groundwater, rivers and lakes. This review presents a summary of the research concerning the production levels and sources of Cl-VOCs, their potential impacts on human health as well as state-of-the-art remediation technologies. Important sources of Cl-VOCs principally include the emissions from industrial processes, the consumption of Cl-VOC-containing products, the disinfection process, as well as improper storage and disposal methods. Human exposure to Cl-VOCs can occur through different routes, including ingestion, inhalation and dermal contact. The toxicological impacts of these compounds have been carefully assessed, and the results demonstrate the potential associations of cancer incidence with exposure to Cl-VOCs. Most Cl-VOCs thus have been listed as priority pollutants by the Ministry of Environmental Protection (MEP) of China, Environmental Protection Agency of the U.S. (U.S. EPA) and European Commission (EC), and are under close monitor and strict control. Yet, more efforts will be put into the epidemiological studies for the risk of human exposure to Cl-VOCs and the exposure level measurements in contaminated sites in the future. State-of-the-art remediation technologies for Cl-VOCs employ non-destructive methods and destructive methods (e.g. thermal incineration, phytoremediation, biodegradation, advanced oxidation processes (AOPs) and reductive dechlorination), whose advantages, drawbacks and future developments are thoroughly discussed in the later sections.