CARTO-guided vs. NavX-guided pulmonary vein antrum isolation and pulmonary vein antrum isolation performed without 3-D mapping: effect of the 3-D mapping system on procedure duration and fluoroscopy time

One-year outcomes of wide antral cryoballoon ablation guided by high-density mapping vs. conventional cryoballoon ablation for atrial fibrillation: a propensity score-matched study

Background

Pulmonary vein isolation with wide antral ablation leads to better clinical outcomes for the treatment of atrial fibrillation, but the isolation lesion is invisible in conventional cryoballoon ablation. In this study, we aim to investigate the efficacy of the wide pulmonary vein isolation technique that includes the intervenous carina region, guided by high-density mapping, compared with pulmonary vein isolation alone without the mapping system.

Methods

We conducted a propensity score-matched comparison of 74 patients who underwent a wide cryoballoon ablation guided by high-density mapping (mapping group) and 74 controls who underwent conventional cryoballoon ablation in the same period (no-mapping group). The primary outcome was a clinical recurrence of documented atrial arrhythmias for >30 s during the 1-year follow-up.

Results

Of 74 patients in the mapping group, residual local potential in the pulmonary vein antrum was found in 30 (40.5%) patients, and additional cryothermal applications were performed to achieve a wide pulmonary vein isolation. Compared with the no-mapping group, the use of the mapping system in the mapping group was associated with a longer fluoroscopic time (26.97 ± 8.07 min vs. 23.76 ± 8.36 min, P = 0.023) and greater fluoroscopic exposure [339 (IQR181-586) mGy vs. 224 (IQR133-409) mGy, P = 0.012]. However, no significant differences between the two groups were found in terms of procedural duration and left atrial dwell time (104.10 ± 18.76 min vs. 102.45 ± 21.01 min, P = 0.619; 83.52 ± 17.01 min vs. 79.59 ± 17.96 min, P = 0.177). The rate of 12-month freedom from clinical atrial arrhythmia recurrence was 85.1% in the mapping group and 70.3% in the no-mapping group (log-rank P = 0.029).

Conclusion

Voltage and pulmonary vein potential mapping after cryoballoon pulmonary vein isolation can identify residual potential in the pulmonary vein antrum, and additional cryoablation guided by mapping leads to improved freedom from atrial arrhythmias compared with conventional pulmonary vein isolation without the mapping system.

Clinical Trial Registration Number

ChiCTR2200064383.

The Fluoroless Future in Electrophysiology: A State-of-the-Art Review

Fluoroscopy has always been the cornerstone imaging method of interventional cardiology procedures. However, radiation exposure is linked to an increased risk of malignancies and multiorgan diseases. The medical team is even more exposed to X-rays, and a higher incidence of malignancies was reported in this professional group. In the last years, X-ray exposure has increased rapidly, involving, above all, the medical team and young patients and forcing alternative fluoroless imaging methods. In cardiac electrophysiology (EP) and pacing, the advent of 3D electroanatomic mapping systems with dedicated catheters has allowed real-time, high-density reconstruction of both heart anatomy and electrical activity, significantly reducing the use of fluoroscopy. In addition, the diffusion of intracardiac echocardiography has provided high anatomical resolution of moving cardiac structures, providing intraprocedural guidance for more complex catheter ablation procedures. These methods have largely demonstrated safety and effectiveness, allowing for a dramatic reduction in X-ray delivery in most arrhythmias' ablations. However, some technical concerns, as well as higher costs, currently do not allow their spread out in EP labs and limit their use to only procedures that are considered highly complex and time-consuming and in young patients. In this review, we aim to update the current employment of fluoroless imaging in different EP procedures, focusing on its strengths and weaknesses.

Zero fluoroscopy catheter ablation for atrial fibrillation: a systematic review and meta-analysis

Introduction

Catheter ablation for atrial fibrillation (AF) is the most frequently performed cardiac ablation procedure worldwide. The majority of ablations can now be performed safely with minimal radiation exposure or even without the use of fluoroscopy, thanks to advances in 3-dimensional electroanatomical mapping systems and/or intracardiac echocardiography. The aim of this study was to conduct a meta-analysis to compare the effectiveness of zero fluoroscopy (ZF) versus non-zero fluoroscopy (NZF) strategies for AF ablation procedures.

Methods

Electronic databases were searched and systematically reviewed for studies comparing procedural parameters and outcomes of ZF vs. NZF approaches in patients undergoing catheter ablation for AF. We used a random-effects model to derive the mean difference (MD) and risk ratios (RR) with a 95% confidence interval (CI).

Results

Our meta-analysis included seven studies comprising 1,593 patients. The ZF approach was found to be feasible in 95.1% of patients. Compared to the NZF approach, the ZF approach significantly reduced procedure time [mean difference (MD): -9.11 min (95% CI: -12.93 to -5.30 min; p < 0.01)], fluoroscopy time [MD: -5.21 min (95% CI: -5.51 to -4.91 min; p < 0.01)], and fluoroscopy dose [MD: -3.96 mGy (95% CI: -4.27 to -3.64; p < 0.01)]. However, there was no significant difference between the two groups in terms of total ablation time [MD: -104.26 s (95% CI: -183.37 to -25.14; p = 0.12)]. Furthermore, there was no significant difference in the acute [risk ratio (RR): 1.01, 95% CI: 1.00-1.02; p = 0.72] and long-term success rates (RR: 0.96, 95% CI: 0.90-1.03; p = 0.56) between the ZF and NZF methods. The complication rate was 2.76% in the entire study population and did not differ between the groups (RR: 0.94, 95% CI: 0.41-2.15; p = 0.89).

Conclusion

The ZF approach is a feasible method for AF ablation procedures. It significantly reduces procedure time and radiation exposure without compromising the acute and long-term success rates or complication rates.

Radiation exposure in cryoballoon ablation compared to radiofrequency ablation with three-dimensional electroanatomic mapping in atrial fibrillation patients

BACKGROUND

Catheter ablation for atrial fibrillation (AF) has become an established treatment to control symptoms. AF ablation either by cryoballoon or radiofrequency using three-dimensional (3D) electroanatomical mapping exposes patients and medical staff to increased doses of radiation.

AIM

To compare radiation exposure in patients during cryoballoon ablation compared to 3D electro-anatomic mapping catheter ablation in AF patients.

METHODS

A total of 30 patients referred for AF ablation underwent full history taking, 12-lead ECG, echocardiogram, and pulmonary vein isolation either by 3D mapping system or cryoballoon. Procedure duration and fluoroscopy time were collected and analyzed. Radiation exposure was measured using thermoluminescent dosimeters placed at different sites related to patients and medical staff.

RESULT

The procedural time was statistically significantly longer with 3D mapping compared to cryoballoon but showed no significant difference regarding fluoroscopy time. There was a significantly higher radiation skin dose at the right scapular area in the cryoballoon ablation group, in addition to higher peak skin dose compared to the 3D mapping ablation group. There was no statistically significant correlation between peak skin doses and fluoroscopy duration but a statistically significant correlation between peak skin dose and usage of high frame rate and the high dose area product.

CONCLUSION

Cryoballoon ablation was found to be associated with higher peak skin radiation doses especially in the right scapular area. Knowing dose area product and peak skin dose is more important than fluoroscopy time alone.

Role of pre-procedural CT imaging on catheter ablation in patients with atrial fibrillation: procedural outcomes and radiological exposure

BACKGROUND

Cardiac computed tomography (CT) is commonly used to study left atrial (LA) and pulmonary veins (PVs) anatomy before atrial fibrillation (AF) ablation. The aim of the study was to determine the impact of pre-procedural cardiac CT with 3D reconstruction on procedural outcomes and radiological exposure in patients who underwent radiofrequency catheter ablation (RFA) of AF.

METHODS

In this registry, 493 consecutive patients (age 62 ± 8 years, 70% male) with paroxysmal (316) or persistent (177) AF who underwent first procedure of RFA were included. A pre-procedural CT scan was obtained in 324 patients (CT group). Antral pulmonary vein isolation was performed in all patients using an open-irrigation-tip catheter with a 3D electroanatomical navigation system. Procedural outcome, including radiological exposure, and clinical outcomes were compared among patients who underwent RFA with (CT group) and without (no CT group) pre-procedural cardiac CT.

RESULTS

Acute PV isolation was obtained in all patients, with a comparable overall complication rate between CT and no CT group (4.3% vs 3%, p = 0.7). No differences were observed about mean duration of the procedure (231 ± 60 vs 233 ± 58 min, p = 0.7) and fluoroscopy time (13 ± 10 vs 13 ± 8 min, p = 0.6) among groups. Cumulative radiation dose resulted significantly higher in the CT group compared with no CT group (8.9 ± 24 vs 4.8 ± 15 mSv, P = 0.02). At 1 year, freedom from AF/atrial tachycardia were comparable among groups (CT group, 227/324 (70%), vs no CT group,119/169 (70%), p = ns).

CONCLUSIONS

Pre-procedural CT does not improve safety and efficacy of AF ablation, increasing significantly the cumulative radiological exposure.

The use of intracardiac echocardiography catheters in endocardial ablation of cardiac arrhythmia: Meta-analysis of efficiency, effectiveness, and safety outcomes

Aims

The optimal use of intracardiac echocardiography (ICE) may reduce fluoroscopy time and procedural complications during endocardial ablation of cardiac arrhythmias. Due to limited evidence in this area, we conducted the first systematic literature review and meta‐analysis to evaluate outcomes associated with the use of ICE.

Methods and Results

Studies reporting the use of ICE during ablation procedures vs without ICE were searched using PubMed/MEDLINE. A meta‐analysis was performed on the 19 studies (2186 patients) meeting inclusion criteria, collectively representing a broad range of arrhythmia mechanisms. Use of ICE was associated with significant reductions in fluoroscopy time (Hedges' g −1.06; 95% confidence interval [CI] −1.81 to −0.32; P < .01), fluoroscopy dose (Hedges' g −1.27; 95% CI −1.91 to −0.62; P < .01), and procedure time (Hedges' g −0.35; 95% CI −0.64 to −0.05; P = .02) vs ablation without ICE. A 6.95 minute reduction in fluoroscopy time and a 15.2 minute reduction in procedure time was observed between the ICE vs non‐ICE groups. These efficiency gains were not associated with any decreased effectiveness or safety. Sensitivity analyses limiting studies to an atrial fibrillation (AF) only population yielded similar results to the main analysis.

Conclusion

The use of ICE in the ablation of cardiac arrhythmias is associated with significantly lower fluoroscopy time, fluoroscopy dose, and shorter procedure time vs ablation without ICE. These efficiency improvements did not compromise the clinical effectiveness or safety of the procedure.

Three-dimensional image integration guidance for cryoballoon pulmonary vein isolation procedures

BACKGROUND

We present a new, easily applicable approach for the guidance of cryoballoon (CB) pulmonary vein isolation (PVI) procedures that use the combination of a 3D-mapping system image integration module and computed tomographic (CT)-derived anatomy. The aim of this retrospective, nonrandomized study was to investigate: (a) an alternative use for an established radiofrequency image integration module for cryo procedures; (b) a guidance technology for cryo PVI based on integrated CT anatomy; and (c) its clinical impact.

METHODS AND RESULTS

CT left atrium-angiography was performed in 50 consecutive patients before a CB PVI procedure, and a 3D reconstruction of the cardiac anatomy was segmented. A total of 25 patients were treated using conventional fluoroscopy; 25 patients were treated using the 3D image integration technique. In the image integration group, the CARTO3 UNIVU (Biosense Webster) module was used for image integration of 3D anatomy and fluoroscopic imaging. Transseptal puncture and cryo PVI were guided by 3D-overlay imaging. Procedures were feasible without complications in all patients and cryo PVI procedures were successfully guided using the image integration technique. The intraprocedural time needed to perform image integration was 37 ± 10 seconds. Fluoroscopy time was 31.7 ± 11.7 minutes in the conventional group and 20.1 ± 7.9 minutes in the image integration group (P < .001), procedure time was 116.3 ± 29.0 minutes in the conventional group vs 101.2 ± 20.9 minutes in the 3D group (P = .04).

CONCLUSION

3D-overlay guidance of CB PVI is feasible, safe, and applicable in real time with minimal effort. It may significantly reduce radiation exposure by introducing 3D information, known from electroanatomic mapping systems, into cryo PVI procedures.

High-resolution Mapping in Patients with Persistent AF

Ablation of AF through electrical isolation of the pulmonary veins is a well-established technique and a cornerstone in the ablation of AF, although there are a variety of techniques and ablation strategies now available. However, high numbers of patients are returning to hospital after ablation procedures such as pulmonary vein isolation (PVI). Scar tissue (as identified by contact voltage mapping) is found to be present in many of these patients, especially those with persistent AF and even those with paroxysmal AF. This scarring is associated with poor outcomes after PVI. Cardiac mapping is necessary to locate triggers and substrate so that an ablation strategy can be optimised. Multipolar mapping catheters offer more information regarding the status of the tissue than standard ablation catheters. A patient-tailored catheter ablation approach, targeting the patient-specific low voltage/fibrotic substrate can lead to improved outcomes.

Extensive Use of 3D Nonfluoroscopic Mapping Systems for Reducing Radiation Exposure during Catheter Ablation Procedures: An Analysis of 10 Years of Activity

Purpose

3D nonfluoroscopic mapping systems (NMSs) are generally used in the catheter ablation (CA) of complex ventricular and atrial arrhythmias. The aim of this study was to evaluate the efficacy, safety, and long-term effect of the extended, routine use of NMSs for CA.

Methods

Our study involved 1028 patients who underwent CA procedures from 2007 to 2016. Initially, CA procedures were performed mainly with the aid of fluoroscopy. From October 2008, NMSs were used for all procedures.

Results

The median fluoroscopy time of the overall CA procedures fell by 71%: from 29.2 min in 2007 to 8.4 min in 2016. Over the same period, total X-ray exposure decreased by 65%: from 58.18 Gy⁎cm² to 20.19 Gy⁎cm². This reduction was achieved without prolonging the total procedure time. In AF CA procedures, the median fluoroscopy time fell by 85%, with an 86% reduction in total X-ray exposure. In SVT CA procedures, the median fluoroscopy time fell by 93%, with a 92% reduction in total X-ray exposure. At the end of the follow-up period, the estimated probability of disease-free survival was 67.7% at 12 months for AF CA procedures and 97.2% at 3 months for SVT CA, without any statistically significant difference between years.

Conclusions

Our study shows the feasibility of using NMSs as the main imaging modality to guide CA. The extended, routine use of NMSs dramatically reduces radiation exposure, with only slight fluctuations due to the process of acquiring experience on the part of untrained operators, without affecting disease-free survival.

Feasibility of zero or near zero fluoroscopy during catheter ablation procedures

BACKGROUND

Awareness of risks associated with radiation exposure to patients and medical staff has significantly increased. It has been reported before that the use of advanced three-dimensional electroanatomical mapping (EAM) system significantly reduces fluoroscopy time, however this study aimed for zero or near zero fluoroscopy ablation to assess its feasibility and safety in ablation of atrial fibrillation (AF) and other tachyarrhythmias in a "real world" experience of a single tertiary care center.

METHODS

This was a single-center study where ablation procedures were attempted without fluoroscopy in 34 consecutive patients with different tachyarrhythmias under the support of EAM system. When transseptal puncture (TSP) was needed, it was attempted under the guidance of intracardiac echocardiography (ICE).

RESULTS

Among 34 patients consecutively enrolled in this study, 28 (82.4%) patients were referred for radiofrequency ablation (RFA) of AF, 3 (8.8%) patients for ablation of right ventricular outflow tract (RVOT) ventricular extrasystole (VES), 1 (2.9%) patient for ablation of atrioventricular nodal reentry tachycardia (AVNRT), 2 (5.9%) patients for typical atrial flutter ablation. In 21 (62%) patients the en- tire procedure was carried out without the use of fluoroscopy. Among 28 AF patients, 15 (54%) patients underwent ablation without the use of fluoroscopy and among these 15 patients, 10 (67%) patients required TSP under ICE guidance while 5 (33%) patients the catheters were introduced to left atrium through a patent foramen ovale. In 13 AF patients, fluoroscopy was only required for double TSP. The total procedure time of AF ablation was 130 ± 50 min. All patients referred for atrial flutter, AVNRT, and VES of the RVOT ablation did not require any fluoroscopy.

CONCLUSIONS

This study demonstrates the feasibility of zero or near zero fluoroscopy procedure including TSP with the support of EAM and ICE guidance in a "real world" experience of a single tertiary care center. When fluoroscopy was required, it was limited to TSP hence keeping the radiation dose very low.

Technical Note: A 3-D rendering algorithm for electromechanical wave imaging of a beating heart

PURPOSE

Arrhythmias can be treated by ablating the heart tissue in the regions of abnormal contraction. The current clinical standard provides electroanatomic 3-D maps to visualize the electrical activation and locate the arrhythmogenic sources. However, the procedure is time-consuming and invasive. Electromechanical wave imaging is an ultrasound-based noninvasive technique that can provide 2-D maps of the electromechanical activation of the heart. In order to fully visualize the complex 3-D pattern of activation, several 2-D views are acquired and processed separately. They are then manually registered with a 3-D rendering software to generate a pseudo-3-D map. However, this last step is operator-dependent and time-consuming.

METHODS

This paper presents a method to generate a full 3-D map of the electromechanical activation using multiple 2-D images. Two canine models were considered to illustrate the method: one in normal sinus rhythm and one paced from the lateral region of the heart. Four standard echographic views of each canine heart were acquired. Electromechanical wave imaging was applied to generate four 2-D activation maps of the left ventricle. The radial positions and activation timings of the walls were automatically extracted from those maps. In each slice, from apex to base, these values were interpolated around the circumference to generate a full 3-D map.

RESULTS

In both cases, a 3-D activation map and a cine-loop of the propagation of the electromechanical wave were automatically generated. The 3-D map showing the electromechanical activation timings overlaid on realistic anatomy assists with the visualization of the sources of earlier activation (which are potential arrhythmogenic sources). The earliest sources of activation corresponded to the expected ones: septum for the normal rhythm and lateral for the pacing case.

CONCLUSIONS

The proposed technique provides, automatically, a 3-D electromechanical activation map with a realistic anatomy. This represents a step towards a noninvasive tool to efficiently localize arrhythmias in 3-D.

Extremely low-frame-rate digital fluoroscopy in catheter ablation of atrial fibrillation: A comparison of 2 versus 4 frame rate

Despite the technological advance in 3-dimensional (3D) mapping, radiation exposure during catheter ablation of atrial fibrillation (AF) continues to be a major concern in both patients and physicians. Previous studies reported substantial radiation exposure (7369-8690 cGy cm) during AF catheter ablation with fluoroscopic settings of 7.5 frames per second (FPS) under 3D mapping system guidance. We evaluated the efficacy and safety of a low-frame-rate fluoroscopy protocol for catheter ablation for AF.Retrospective analysis of data on 133 patients who underwent AF catheter ablation with 3-D electro-anatomic mapping at our institute from January 2014 to May 2015 was performed. Since January 2014, fluoroscopy frame rate of 4-FPS was implemented at our institute, which was further decreased to 2-FPS in September 2014. We compared the radiation exposure quantified as dose area product (DAP) and effective dose (ED) between the 4-FPS (n = 57) and 2-FPS (n = 76) groups.The 4-FPS group showed higher median DAP (599.9 cGy cm; interquartile range [IR], 371.4-1337.5 cGy cm vs. 392.0 cGy cm; IR, 289.7-591.4 cGy cm; P < .01), longer median fluoroscopic time (24.4 min; IR, 17.5-34.9 min vs. 15.1 min; IR, 10.7-20.1 min; P < .01), and higher median ED (1.1 mSv; IR, 0.7-2.5 mSv vs. 0.7 mSv; IR, 0.6-1.1 mSv; P < .01) compared with the 2-FPS group. No major procedure-related complications such as cardiac tamponade were observed in either group. Over follow-up durations of 331 ± 197 days, atrial tachyarrhythmia recurred in 20 patients (35.1%) in the 4-FPS group and in 27 patients (35.5%) in the 2-FPS group (P = .96). Kaplan-Meier survival analysis revealed no significant different between the 2 groups (log rank, P = .25).In conclusion, both the 4-FPS and 2-FPS settings were feasible and emitted a relatively low level of radiation compared with that historically reported for DAP in a conventional fluoroscopy setting.

Contact force technology integrated with 3D navigation system for atrial fibrillation ablation: improving results?

INTRODUCTION

Pulmonary veins isolation (PVI) by radiofrequency (RF) ablation is currently an established treatment for symptomatic, drug-resistant paroxysmal atrial fibrillation. Although the effectiveness of the therapy has been clearly demonstrated, success rate after a single procedure is still sub-optimal. The main reason for recurrences after PVI is electrical pulmonary vein-atrium reconnection. In order to increase the likelihood of permanent PVI, the creation of a transmural, durable lesion is mandatory. The main determinants of lesion size and transmurality are power, stability, duration and contact-force during RF application. In recent times, catheters with contact-force sensors have been developed and released for clinical use. Areas covered: The present review summarizes rational and clinical evidences for efficacy and safety of contact force (CF) technology integrated into 3D navigation systems for AF ablation. Expert commentary Although CF technology has a strong rational, clinical data on the superior safety and efficacy of CF technology over traditional non-CF catheters are still conflicting. The reason for that is very likely to rely on the lack of definite data on how to optimize CF parameters and how to integrate CF data with power, duration of RF applications and information on catheter stability.

Contact Force and Atrial Fibrillation Ablation

Catheters able to measure the force and vector of contact between the catheter tip and myocardium are now available. Pre-clinical work has established that the degree of contact between the radiofrequency ablation catheter and myocardium correlates with the size of the delivered lesion. Excess contact is associated with steam pops and perforation. Catheter contact varies within the left atrium secondary to factors including respiration, location, atrial rhythm and the trans-septal catheter delivery technology used. Compared with procedures performed without contact force (CF)-sensing, the use of this technology has, in some studies, been found to improve complication rates, procedure and fluoroscopy times, and success rates. However, for each of these parameters there are also studies suggesting a lack of difference from the availability of CF data. Nevertheless, CF-sensing technology has been adopted as a standard of care in many institutions. It is likely that use of CF-sensing technology will allow for the optimization of each individual radiofrequency application to maximize efficacy and procedural safety. Recent work has attempted to define what these optimal targets should be, and approaches to do this include assessing for sites of pulmonary vein reconnection after ablation, or comparing the impedance response to ablation. Based on such work, it is apparent that factors including mean CF, force time integral (the area under the force-time curve) and contact stability are important determinants of ablation efficacy. Multicenter prospective randomized data are lacking in this field and required to define the CF parameters required to produce optimal ablation.

Cost-effectiveness of Catheter Ablation Versus Antiarrhythmic Drug Therapy for the Treatment of Atrial Fibrillation: A Canadian Perspective

Background: Atrial fibrillation (AF) affects approximately 350,000 Canadians and has an estimated annual economic burden exceeding $800 million dollars. Anti-arrhythmic drug (AAD) therapy and catheter ablation (CA) are the two common treatments for paroxysmal AF. However, the upfront costs of CA are quite substantial. Objective: The objective of this study was to assess the cost-effectiveness of CA compared to AAD for AF based on community practice. Methods: A Markov simulation model was developed for a hypothetical cohort of 55-year-old patients with paroxysmal AF and a low stroke risk. Patients received either CA or AAD. Costs and quality-adjusted life years (QALYs) were computed over lifetime, 10-year, and 5-year time horizons. Model inputs were obtained from a large, prospectively collected, single-center Canadian registry and augmented with the published literature, using Canadian cost estimates for disease states. Threshold values of $25,000, $50,000, and $100,000 per QALY, respectively, were used to determine cost-effectiveness. All costs were expressed in 2012 Canadian dollars. Results: The incremental cost-effectiveness ratio for CA versus AAD therapy was $1,228, $22,879, and $63,647 for the lifetime, 10-year, and 5-year time horizons, respectively. Over a lifetime horizon, the probability of achieving cost-effectiveness was 100% for all 3 cost per QALY thresholds. The 10-year probability of achieving cost-effectiveness was 74%, 100%, and 100% at the $25,000, $50,000, and $100,000 thresholds, respectively. The 5-year probability of achieving cost-effectiveness was 0%, 0.9%, and 100% at the 3 cost per QALY thresholds. Results were most sensitive to time horizon, probability of repeat AF ablation, and stroke rate. Conclusions: From the perspective of the Canadian Healthcare system, CA is a potentially cost-effective treatment compared to AAD therapy in a low stroke risk population using real-world data when examining a time horizon of greater than 5 years.

Randomized trial comparing pulmonary vein isolation using the SmartTouch catheter with or without real-time contact force data

BACKGROUND

Contact force (CF) information may improve the safety and efficacy of ablation for paroxysmal atrial fibrillation (PAF).

OBJECTIVE

The purpose of this study was to assess the impact of CF data on ablation for PAF.

METHODS

Patients undergoing first-time PAF ablation were randomized at 7 UK centers to ablation with (CF-on) or without (CF-off) CF data available to the operator, using the same ablation catheter and mapping system. An ablation CF of 5-40g was targeted. Pulmonary vein (PV) reconnection was assessed with adenosine at 60 minutes. Follow-up for arrhythmia recurrence was for 1 year with 7-day Holter recordings at 6 and 12 months.

RESULTS

One hundred seventeen patients were studied (59 CF-on, 58 CF-off). In the CF-on group, a reduction in acute PV reconnection rates (22% vs 32%, P = .03) but no significant difference in 1-year success rates off antiarrhythmic drugs (49% vs 52%, P = .9) was observed. There was no difference in major complication rates: 2 of 59 (3%) CF-on, 3 of 58 (5%) CF-off (P = .7). Procedural and fluoroscopy times were not significantly different (P>.5). Overall mean CFs per ablation were not different between groups (13.4 [9.1-19.6]g CF-on, 13.4 [7.4-22.4]g CF-off, P = .5), but a greater proportion of readings in the CF-on group were in the target range (80% vs 68%, P<.001).

CONCLUSION

This randomized multicenter study demonstrated that CF data availability was associated with reduced acute PV reconnection but not improved 1-year success rates, procedural and fluoroscopy times, or complication rates. There was a reduction in extremes of CF, above and below the study target range, suggesting greater CF control during ablation.

Advanced Mapping Systems To Guide Atrial Fibrillation Ablation: Electrical Information That Matters

Catheter ablation is an established and widespread treatment for atrial fibrillation (AF). Contemporary electroanatomical mapping systems (EAMs) have been developed to facilitate mapping processes but remain limited by spatiotemporal and processing restrictions. Advanced mapping systems emerged from the need to better understand and ablate complex AF substrate, by improving the acquisition and illustration of electrophysiological information. In this review, we present you the recently advanced mapping systems for AF ablation in comparison to the established contemporary EAMs.

Evaluation of Entrance Skin Dose during Catheter Ablation Procedures by Use of Reference Air-Kerma Displayed on Angiography Systems

BACKGROUND

Our aim in this study was to estimate entrance skin doses (ESDs) to patients who underwent catheter ablation procedures, by using a reference air-kerma (RAK) displayed on the monitor of an angiography system (displayed RAK).

METHODS

The displayed RAK was calibrated with use of an air-kerma value measured on a 20-cm-thick acrylic plate at the interventional reference point for the inclusion of backscattered x-rays (calibrated RAK). The ESD evaluated from the calibrated RAK (evaluated ESD) was verified through direct ESD measurements on an anthropomorphic phantom. The values of the evaluated ESD agreed with those of the measured ESD within a statistical error of 10% for both fluoroscopy and digital cine. The patient population included 356 consecutive patients (108 female and 248 male) who underwent catheter ablation procedures in the catheter laboratory of the Nagoya Daini Red-Cross Hospital from January 2013 to February 2014, where ablation procedures were performed for seven types of arrhythmias, i.e., atrial fibrillation (AF), atrial flutter (AFL), atrial tachycardia (AT), atrioventricular nodal reentrant tachycardia (AVNRT), ventricular premature contraction (VPC), ventricular tachycardia (VT), and Wolff-Parkinson-White syndrome (WPW).

RESULTS

Patients who had arrhythmias that received the highest evaluated ESD were those for AF, followed by those for VPC, AT, WPW, AFL, VT, and AVNRT.

CONCLUSIONS

Despite extremely long fluoroscopy times of up to 66.6 minutes in left anterior oblique projection, only one patient was considered to exceed a threshold dose of 2 Gy for the onset of radiation-induced skin injuries.

Voltage-based device tracking in a 1.5 Tesla MRI during imaging: initial validation in swine models

PURPOSE

Voltage-based device-tracking (VDT) systems are commonly used for tracking invasive devices in electrophysiological cardiac-arrhythmia therapy. During electrophysiological procedures, electro-anatomic mapping workstations provide guidance by integrating VDT location and intracardiac electrocardiogram information with X-ray, computerized tomography, ultrasound, and MR images. MR assists navigation, mapping, and radiofrequency ablation. Multimodality interventions require multiple patient transfers between an MRI and the X-ray/ultrasound electrophysiological suite, increasing the likelihood of patient-motion and image misregistration. An MRI-compatible VDT system may increase efficiency, as there is currently no single method to track devices both inside and outside the MRI scanner.

METHODS

An MRI-compatible VDT system was constructed by modifying a commercial system. Hardware was added to reduce MRI gradient-ramp and radiofrequency unblanking pulse interference. VDT patches and cables were modified to reduce heating. Five swine cardiac VDT electro-anatomic mapping interventions were performed, navigating inside and thereafter outside the MRI.

RESULTS

Three-catheter VDT interventions were performed at >12 frames per second both inside and outside the MRI scanner with <3 mm error. Catheters were followed on VDT- and MRI-derived maps. Simultaneous VDT and imaging was possible in repetition time >32 ms sequences with <0.5 mm errors, and <5% MRI signal-to-noise ratio (SNR) loss. At shorter repetition times, only intracardiac electrocardiogram was reliable. Radiofrequency heating was <1.5°C.

CONCLUSION

An MRI-compatible VDT system is feasible.

Reduction of radiation exposure in catheter ablation of atrial fibrillation: Lesson learned

Over the last decades, the concern for the radiation injury hazard to the patients and the professional staff has increased in the medical community. Since there is no magnitude of radiation exposure that is known to be completely safe, the use of ionizing radiation during medical diagnostic or interventional procedures should be as low as reasonably achievable (ALARA principle). Nevertheless, in cardiovascular medicine, radiation exposure for coronary percutaneous interventions or catheter ablation of cardiac arrhythmias may be high: for ablation of a complex arrhythmia, such as atrial fibrillation, the mean dose can be > 15 mSv and in some cases > 50 mSv. In interventional electrophysiology, although fluoroscopy has been widely used since the beginning to navigate catheters in the heart and the vessels and to monitor their position, the procedure is not based on fluoroscopic imaging. Therefore, non-fluoroscopic three-dimensional systems can be used to navigate electrophysiology catheters in the heart with no or minimal use of fluoroscopy. Although zero-fluoroscopy procedures are feasible in limited series, there may be difficulties in using no fluoroscopy on a routine basis. Currently, a significant reduction in radiation exposure towards near zero-fluoroscopy procedures seems a simpler task to achieve, especially in ablation of complex arrhythmias, such as atrial fibrillation. The data reported in the literature suggest the following three considerations. First, the use of the non-fluoroscopic systems is associated with a consistent reduction in radiation exposure in multiple centers: the more sophisticated and reliable this technology is, the higher the reduction in radiation exposure. Second, the use of these systems does not automatically lead to reduction of radiation exposure, but an optimized workflow should be developed and adopted for a safe non-fluoroscopic navigation of catheters. Third, at any level of expertise, there is a specific learning curve for the operators in the non-fluoroscopic manipulation of catheters; however, the learning curve is shorter for more experienced operators compared to less experienced operators.

Acquisition of the pulmonary venous and left atrial anatomy with non-contrast-enhanced MRI for catheter ablation of atrial fibrillation: Usefulness of two-dimensional balanced steady-state free precession

BACKGROUND

Usually, the pulmonary venous and left atrial (PV-LA) anatomy is assessed with contrast-enhanced computed tomographic imaging for catheter ablation of atrial fibrillation (AF). A non-contrast-enhanced magnetic resonance (MR) imaging method has not been established. Three-dimensional balanced steady-state free precession (3D b-SSFP) sequences cannot visualize the PV-LA anatomy simultaneously because of the signal intensity defect of pulmonary veins. We compared two-dimensional (2D) b-SSFP sequences with 3D b-SSFP sequences in depicting the PV-LA anatomy with non-contrast-enhanced MR imaging for AF ablation.

METHODS

Eleven healthy volunteers underwent non-contrast-enhanced MR imaging with 3D b-SSFP and 2D b-SSFP sequences. The MR images were reconstructed on the 3D PV-LA surface image. Two experienced radiological technicians independently scored the multiplanar reformatted (MPR) images on a scale of 1-4 (from 1, not visualized, to 4, excellent definition). The overall score was a sum of 5 segments (LA and 4 PVs).

RESULTS

In the 2D b-SSFP method, MR imaging was successfully performed, and the 3D PV-LA surface image was precisely reconstructed in all healthy volunteers. The image score was significantly higher in the 2D b-SSFP method compared to the 3D b-SSFP method (19 [19; 20] vs. 12 [11; 15], p=0.004, for both observers). No PV signal intensity defects occurred in the 2D b-SSFP method.

CONCLUSIONS

The 2D b-SSFP sequence was more useful than the 3D b-SSFP sequence in adequately depicting the PV-LA anatomy.

Electroanatomical mapping of atrial fibrillation: Review of the current techniques and advances

The number of atrial fibrillation (AF) catheter ablations performed annually has been increasing exponentially in the western countries in the last few years. This is clearly related to technological advancements, which have greatly contributed to the improvements in catheter ablation of AF. In particular, state-of-the-art electroanatomical mapping systems have greatly facilitated mapping processes and have enabled complex AF ablation strategies. In this review, we outline contemporary and upcoming electroanatomical key technologies focusing on new mapping tools and strategies in the context of AF catheter ablation.

The ABC of a Simple Method for Pulmonary Vein Angiography

Catheter-directed intervention to treat atrial fibrillation (AF) is becoming widely accepted procedure in current clinical practice. For assessment of pulmonary vein (PV) anatomy, angiography of left atrium (LA) and/or PV is often performed. We present a new, simple angiographic method for PVs and LA opacification using SL1 sheath. Total of 100 patients in our clinic underwent this procedure. In all of the cases good angiographic results were achieved. No immediate or late complications related to this procedure were observed.

[Influence of heart rhythm, breathing and arm position during computed tomography scanning on the registration accuracy of electro anatomical map (EAM) images, left atrium three-dimensional computed tomography angiography images, and fluoroscopy time during ablation to treat atrial fibrillation]

BACKGROUND

In CARTOMERGE(®) for treatment of atrial fibrillation (AF) by ablation, by integrating electro anatomical map (EAM) and left atrium three-dimensional computed tomography angiography (3D-CTA) images, identification of the ablation points is simplified and the procedure can be made carried out more rapidly. However, the influence that heart rhythm, breathing and arm position during CT scanning have on registration accuracy and fluoroscopy time is not clear.

PURPOSE

To clarify the influence on registration accuracy and fluoroscopy time of heart rhythm, breathing and arm position during CT scanning.

METHODS

The patients were CT-scanned during both sinus rhythm (SR) and AF in each study subject. We evaluated the registration accuracy of images reconstructed between the cardiac cycle and assessed the registration accuracy and fluoroscopy time of images obtained during inspiratory breath-hold, expiratory breath-hold and up and down position of the arm.

RESULTS

Although the registration accuracy of the EAM image and left atrium 3D-CTA image showed a significant difference during SR, no significant difference was seen during AF. Expiratory breath-hold and down position of the arm resulted in the highest registration accuracy and the shortest fluoroscopy time. However, arm position had no significant effect on registration accuracy.

CONCLUSIONS

Heart rhythm and breathing during CT scanning have a significant effect on the registration accuracy of EAM images, left atrium 3D-CTA images, and fluoroscopy time.

Electromagnetic servoing-a new tracking paradigm

Electromagnetic (EM) tracking is highly relevant for many computer assisted interventions. This is in particular due to the fact that the scientific community has not yet developed a general solution for tracking of flexible instruments within the human body. Electromagnetic tracking solutions are highly attractive for minimally invasive procedures, since they do not require line of sight. However, a major problem with EM tracking solutions is that they do not provide uniform accuracy throughout the tracking volume and the desired, highest accuracy is often only achieved close to the center of tracking volume. In this paper, we present a solution to the tracking problem, by mounting an EM field generator onto a robot arm. Proposing a new tracking paradigm, we take advantage of the electromagnetic tracking to detect the sensor within a specific sub-volume, with known and optimal accuracy. We then use the more accurate and robust robot positioning for obtaining uniform accuracy throughout the tracking volume. Such an EM servoing methodology guarantees optimal and uniform accuracy, by allowing us to always keep the tracked sensor close to the center of the tracking volume. In this paper, both dynamic accuracy and accuracy distribution within the tracking volume are evaluated using optical tracking as ground truth. In repeated evaluations, the proposed method was able to reduce the overall error from 6.64±7.86 mm to a significantly improved accuracy of 3.83±6.43 mm. In addition, the combined system provides a larger tracking volume, which is only limited by the reach of the robot and not the much smaller tracking volume defined by the magnetic field generator.

A randomised comparison of Cartomerge vs. NavX fusion in the catheter ablation of atrial fibrillation: the CAVERN Trial

PURPOSE

Integration of a 3D reconstruction of the left atrium into cardiac mapping systems can aid catheter ablation of atrial fibrillation (AF). The two most widely used systems are NavX Fusion and Cartomerge. We aimed to compare the clinical efficacy of these systems in a randomised trial.

METHODS

Patients undergoing their first ablation were randomised to mapping using either NavX fusion or CartoMerge. Pulmonary vein isolation by wide area circumferential ablation was performed for paroxysmal AF with additional linear and fractionated potential ablation for persistent AF. Seven-day Holter monitoring was used for confirmation of sinus rhythm maintenance at 6 months.

RESULTS

Ninety-seven patients were randomised and underwent a procedure. There was no difference in the primary endpoint of freedom from arrhythmia at 6 months (51% in the Cartomerge group vs. 48% in the NavX Fusion group, p = 0.76). 3D image registration was faster with Cartomerge (24 vs. 33 min, p = 0.0001), used less fluoroscopic screening (11 vs. 15 min, p = 0.039) with a lower fluoroscopic dose (840 vs. 1,415 mGyCm(2), p = 0.043). There was a strong trend to lower ablation times in the Cartomerge group, overall RF time (3,292 s vs. 4,041, p = 0.07). Distance from 3D lesion to 3D image shell was smaller in the Cartomerge group (2.7 ± 1.9 vs. 3.3 ± 3.7 mm, p < 0.001).

CONCLUSIONS

Cartomerge appears to be faster and uses less fluoroscopy to achieve registration than NavX Fusion, but overall procedural times and clinical outcomes are similar.

Fusion of imaging technologies: how, when, and for whom?

Over the past decade, electroanatomic mapping has emerged as a useful tool for complex ablation procedures. A more recent advancement is the development of image integration. Image integration refers to the process of registering a previously acquired MRI or CT scan of the heart with the mapping space during the ablation procedure. The technique of image integration is now relied on by many electrophysiology laboratories to guide complex ablation procedures, particularly atrial fibrillation ablation and ablation of patients with ventricular tachycardia in the setting of structural heart disease. An even more recent development is image fusion. This refers to taking information about the myocardial substrate, especially intramyocardial scar, and registering it with the active mapping space. This technique remains in its infancy but shows great promise in facilitating complex ablation procedures. The purpose of the article is to review the development, state of the art, and future of these image integration and fusion techniques.