Antibacterial Activity of Light-Activated Silicone Containing Methylene Blue and Gold Nanoparticles of Different Sizes

Easy and versatile cellulosic support inhibiting broad spectrum strains: synergy between photodynamic antimicrobial therapy and polymyxin B

Despite advances achieved in the health field over the last decade, infections caused by resistant bacterial strains are an increasingly important societal issue that needs to be addressed. New approaches have already been developed to overcome this problem. Photodynamic antimicrobial chemotherapy (PACT) could provide a promising alternative method to eradicate microbes. This approach has already inspired the development of innovative surfaces. Interesting results were achieved against Gram-positive bacteria, but it also appeared that Gram-negative strains, especially Pseudomonas aeruginosa, were less sensitive to PACT. However, materials coated with cationic porphyrins have already proven their wide-spectrum activity, but these materials were not suitable for industrial-scale production. The main aim of this work was the design of a large-scale evolutionary material based on PACT and antibiotic prophylaxis. Transparent regenerated cellulose has been simply impregnated with a usual cationic porphyrin (N-methylpyridyl) and an antimicrobial peptide (polymyxin B). In addition to its photophysical properties, this film exhibited a wide-spectrum bactericidal activity over 4 days despite daily application of fresh bacterial inoculums. The efficiency of PACT and polymyxin B combination could help to reduce the emergence of bacterial multi-resistant strains and we believe that this kind of material would provide an excellent opportunity to prevent bacterial contamination of bandages or packaging.

Emerging Strategies in Enhancing Singlet Oxygen Generation of Nano-Photosensitizers Toward Advanced Phototherapy

The great promise of photodynamic therapy (PDT) has thrusted the rapid progress of developing highly effective photosensitizers (PS) in killing cancerous cells and bacteria. To mitigate the intrinsic limitations of the classical molecular photosensitizers, researchers have been looking into designing new generation of nanomaterial-based photosensitizers (nano-photosensitizers) with better photostability and higher singlet oxygen generation (SOG) efficiency, and ways of enhancing the performance of existing photosensitizers. In this paper, we review the recent development of nano-photosensitizers and nanoplasmonic strategies to enhance the SOG efficiency for better PDT performance. Firstly, we explain the mechanism of reactive oxygen species generation by classical photosensitizers, followed by a brief discussion on the commercially available photosensitizers and their limitations in PDT. We then introduce three types of new generation nano-photosensitizers that can effectively produce singlet oxygen molecules under visible light illumination, i.e., aggregation-induced emission nanodots, metal nanoclusters (< 2 nm), and carbon dots. Different design approaches to synthesize these nano-photosensitizers were also discussed. To further enhance the SOG rate of nano-photosensitizers, plasmonic strategies on using different types of metal nanoparticles in both colloidal and planar metal-PS systems are reviewed. The key parameters that determine the metal-enhanced SOG (ME-SOG) efficiency and their underlined enhancement mechanism are discussed. Lastly, we highlight the future prospects of these nanoengineering strategies, and discuss how the future development in nanobiotechnology and theoretical simulation could accelerate the design of new photosensitizers and ME-SOG systems for highly effective image-guided photodynamic therapy.

Contributions of photochemistry to bio-based antibacterial polymer materials

Surgical site infections constitute a major health concern that may be addressed by conferring antibacterial properties to surgical tools and medical devices via functional coatings. Bio-sourced polymers are particularly well-suited to prepare such coatings as they are usually safe and can exhibit intrinsic antibacterial properties or serve as hosts for bactericidal agents. The goal of this Review is to highlight the unique contribution of photochemistry as a green and mild methodology for the development of such bio-based antibacterial materials. Photo-generation and photo-activation of bactericidal materials are illustrated. Recent efforts and current challenges to optimize the sustainability of the process, improve the safety of the materials and extend these strategies to 3D biomaterials are also emphasized.

Methylene Blue-Based Nano and Microparticles: Fabrication and Applications in Photodynamic Therapy

Methylene blue (MB) has been used in the textile industry since it was first extracted by the German chemist Heinrich Caro. Its pharmacological properties have also been applied toward the treatment of certain diseases such as methemoglobinemia, ifosfamide-induced encephalopathy, and thyroid conditions requiring surgery. Recently, the utilization of MB as a safe photosensitizer in photodynamic therapy (PDT) has received attention. Recent findings demonstrate that photoactivated MB exhibits not only anticancer activity but also antibacterial activity both in vitro and in vivo. However, due to the hydrophilic nature of MB, it is difficult to create MB-embedded nano- or microparticles capable of increasing the clinical efficacy of the PDT. This review aims to summarize fabrication techniques for MB-embedded nano and microparticles and to provide both in vitro and in vivo examples of MB-mediated PDT, thereby offering a future perspective on improving this promising clinical treatment modality. We also address examples of MB-mediated PDT in both cancer and infection treatments. Both in-vitro and in-vivo studies are summarized here to document recent trends in utilizing MB as an effective photosensitizer in PDT. Lastly, we discuss how developing efficient MB-carrying nano- and microparticle platforms would be able to increase the benefits of PDT.

Anti-bacterial activity of gold nanocomposites as a new nanomaterial weapon to combat photogenic agents: recent advances and challenges

Gold nanocomposites are being widely used in numerous biomedical applications owing to their excellent stability and miniaturization. Gold nanocomposites are notable because of their flexibility of functionalization and synthesis, ease of detection, and low toxicity. Cost-effectiveness, long-term stability, non-cytotoxicity, and biocompatibility are the main aspects of ideal nanocomposites. Antibacterial nanocomposites are being developed extensively in the food industry, environmental applications, and biological and medical devices. This review focuses on the applications of metal-based nanoparticles, mainly gold nanoparticles (AuNPs), as antibacterial agents in medical approaches. Additionally, the antibacterial mechanisms of AuNPs and their roles in fighting antibiotic-resistant microorganisms are highlighted in the present review.

Gold nanocomposites are being widely used in numerous biomedical applications owing to their excellent stability and miniaturization.

Antibacterial Surfaces with Activity against Antimicrobial Resistant Bacterial Pathogens and Endospores

Hospital-acquired bacterial infections are a significant burden on healthcare systems worldwide causing an increased duration of hospital stays and prolonged patient suffering. We show that polyurethane containing crystal violet (CV) and 3-4 nm zinc oxide nanoparticles (ZnO NPs) possesses excellent bactericidal activity against hospital-acquired pathogens including multidrug resistant Escherichia coli (E. coli), Pseudomonas aeruginosa, methicillin-resistant Staphylococcus aureus (MRSA), and even highly resistant endospores of Clostridioides (Clostridium) difficile. Importantly, we used clinical isolates of bacterial strains, a protocol to mimic the environmental conditions of a real exposure in the healthcare setting, and low light intensity equivalent to that encountered in UK hospitals (∼500 lux). Our data shows that ZnO NPs enhance the photobactericidal activity of CV under low intensity light even with short exposure times, and we show that this involves both Type I and Type II photochemical pathways. Interestingly, polyurethane containing ZnO NPs alone showed significant bactericidal activity in the dark against one strain of E. coli, indicating that the NPs possess both light-activated synergistic activity with CV and inherent bactericidal activity that is independent of light. These new antibacterial polymers are potentially useful in healthcare facilties to reduce the transmission of pathogens between people and the environment.

Hydrogels Loaded with Methylene Blue: Sorption-Desorption and Antimicrobial Photoactivation Study

Cross-linked dextran-graft-polyacrylamide hydrogels with different cross-linking density loaded with methylene blue was prepared as light-activated antimicrobial materials. Sorption/desorption properties of hydrogels were studied by estimating the change in the absorption maximum of MB solutions. The sorption/desorption rate of MB into/out of hydrogel depends on the hydrogel structure. The antibacterial properties of the light-irradiated materials were tested against Staphylococcus aureus. It was shown that irradiation of hydrogels in the presence of methylene blue was able to eliminate the bacteria strains.

Revisiting Current Photoactive Materials for Antimicrobial Photodynamic Therapy

Microbial infection is a severe concern, requiring the use of significant amounts of antimicrobials/biocides, not only in the hospital setting, but also in other environments. The increasing use of antimicrobial drugs and the rapid adaptability of microorganisms to these agents, have contributed to a sharp increase of antimicrobial resistance. It is obvious that the development of new strategies to combat planktonic and biofilm-embedded microorganisms is required. Photodynamic inactivation (PDI) is being recognized as an effective method to inactivate a broad spectrum of microorganisms, including those resistant to conventional antimicrobials. In the last few years, the development and biological assessment of new photosensitizers for PDI were accompanied by their immobilization in different supports having in mind the extension of the photodynamic principle to new applications, such as the disinfection of blood, water, and surfaces. In this review, we intended to cover a significant amount of recent work considering a diversity of photosensitizers and supports to achieve an effective photoinactivation. Special attention is devoted to the chemistry behind the preparation of the photomaterials by recurring to extensive examples, illustrating the design strategies. Additionally, we highlighted the biological challenges of each formulation expecting that the compiled information could motivate the development of other effective photoactive materials.

Aluminum plasmonic nanoshielding in ultraviolet inactivation of bacteria

Ultraviolet (UV) irradiation is an effective bacterial inactivation technique with broad applications in environmental disinfection. However, biomedical applications are limited due to the low selectivity, undesired inactivation of beneficial bacteria and damage of healthy tissue. New approaches are needed for the protection of biological cells from UV radiation for the development of controlled treatment and improved biosensors. Aluminum plasmonics offers attractive opportunities for the control of light-matter interactions in the UV range, which have not yet been explored in microbiology. Here, we investigate the effects of aluminum nanoparticles (Al NPs) prepared by sonication of aluminum foil on the UVC inactivation of E. coli bacteria and demonstrate a new radiation protection mechanism via plasmonic nanoshielding. We observe direct interaction of the bacterial cells with Al NPs and elucidate the nanoshielding mechanism via UV plasmonic resonance and nanotailing effects. Concentration and wavelength dependence studies reveal the role and range of control parameters for regulating the radiation dosage to achieve effective UVC protection. Our results provide a step towards developing improved radiation-based bacterial treatments.

Recent Developments in the Preparation of Silicones with Antimicrobial Properties

This Focus Review describes state-of-the-art methods for the preparation of antimicrobial silicones. Given the diversity of antimicrobial activity and their mechanisms, the performance of these materials is highly dependent on the characteristics of the polymeric matrix. Therefore, different synthetic routes have been developed, such as 1) physical treatments, 2) chemical transformations, and 3) copolymerization. This classification is not exclusive, so some products belong to more than one class. Herein, we attempt to present a handy overview of the development of antimicrobial silicones, their most important application fields, the most relevant antimicrobial assays, and, as the title suggests, an overview of the most relevant preparation methods.

Enhancement of the Efficacy of Photodynamic Inactivation of Candida albicans with the Use of Biogenic Gold Nanoparticles

This study reports on successful photodynamic inactivation of planktonic and biofilm cells of Candida albicans using Rose Bengal (RB) in combination with biogenic gold nanoparticles synthesized by the cell-free filtrate of Penicillium funiculosum BL1 strain. Monodispersed colloidal gold nanoparticles coated with proteins were characterized by a number of techniques including SEM-EDS, TEM, UV-Vis absorption and fluorescence spectroscopy, as well as Fourier transform infrared spectroscopy to be 24 ± 3 nm spheres. A Xe lamp (output power of 20mW, delivering intensity of 53 mW cm^-2 ) was used as a light source to study the effects of RB alone, the gold nanoparticles alone and the RB-gold nanoparticle mixture on the viability of C. albicans cells. The most effective reduction in the number of planktonic cells was found after 30 min of Xe lamp light irradiation (95.4 J cm^-2 ) and was 4.89 log₁₀ that is 99.99% kill for the mixture of RB with gold nanoparticles compared with 2.19 log₁₀ or 99.37% for RB alone. The biofilm cells were more resistant to photodynamic inactivation, and the highest effective reduction in the number of cells was found after 30 min of irradiation in the presence of the RB-gold nanoparticles mixture and was 1.53 log₁₀ , that is 97.04% kill compared with 0.6 log₁₀ or 74.73% for RB. The probable mechanism of enhancement of RB-mediated photodynamic fungicidal efficacy against C. albicans in the presence of biogenic gold nanoparticles is discussed leading to the conclusion that this process may have a multifaceted character.

Thiol-Capped Gold Nanoparticles Swell-Encapsulated into Polyurethane as Powerful Antibacterial Surfaces Under Dark and Light Conditions

A simple procedure to develop antibacterial surfaces using thiol-capped gold nanoparticles (AuNPs) is shown, which effectively kill bacteria under dark and light conditions. The effect of AuNP size and concentration on photo-activated antibacterial surfaces is reported and we show significant size effects, as well as bactericidal activity with crystal violet (CV) coated polyurethane. These materials have been proven to be powerful antibacterial surfaces against both Gram-positive and Gram-negative bacteria. AuNPs of 2, 3 or 5 nm diameter were swell-encapsulated into PU before a coating of CV was applied (known as PU-AuNPs-CV). The antibacterial activity of PU-AuNPs-CV samples was tested against Staphylococcus aureus and Escherichia coli as representative Gram-positive and Gram-negative bacteria under dark and light conditions. All light conditions in this study simulated a typical white-light hospital environment. This work demonstrates that the antibacterial activity of PU-AuNPs-CV samples and the synergistic enhancement of photoactivity of triarylmethane type dyes is highly dependent on nanoparticle size and concentration. The most powerful PU-AuNPs-CV antibacterial surfaces were achieved using 1.0 mg mL-1 swell encapsulation concentrations of 2 nm AuNPs. After two hours, Gram-positive and Gram-negative bacteria were reduced to below the detection limit (>4 log) under dark and light conditions.

The bactericidal activity of glutaraldehyde-impregnated polyurethane

Although glutaraldehyde is known to be bactericidal in solution, its potential use to create novel antibacterial polymers suitable for use in healthcare environments has not been evaluated. Here, novel materials were prepared in which glutaraldehyde was either incorporated into polyurethane using a simple "swell-encapsulation-shrink" method (hereafter referred to as "glutaraldehyde-impregnated polyurethane"), or simply applied to the polymer surface (hereafter referred to as "glutaraldehyde-coated polyurethane"). The antibacterial activity of glutaraldehyde-impregnated and glutaraldehyde-coated polyurethane samples was tested against Escherichia coli and Staphylococcus aureus. Glutaraldehyde-impregnated polyurethane resulted in a 99.9% reduction in the numbers of E. coli within 2 h and a similar reduction of S. aureus within 1 h, whereas only a minimal reduction in bacterial numbers was observed when the biocide was bound to the polymer surface. After 15 days, however, the bactericidal activity of the impregnated material was substantially reduced presumably due to polymerization of glutaraldehyde. Thus, although glutaraldehyde retains antibacterial activity when impregnated into polyurethane, activity is not maintained for extended periods of time. Future work should examine the potential of chemical modification of glutaraldehyde and/or polyurethane to improve the useful lifespan of this novel antibacterial polymer.

Enhancing the Antibacterial Activity of Light-Activated Surfaces Containing Crystal Violet and ZnO Nanoparticles: Investigation of Nanoparticle Size, Capping Ligand, and Dopants

Healthcare-associated infections pose a serious risk for patients, staff, and visitors and are a severe burden on the National Health Service, costing at least £1 billion annually. Antimicrobial surfaces significantly contribute toward reducing the incidence of infections as they prevent bacterial adhesion and cause bacterial cell death. Using a simple, easily upscalable swell-encapsulation-shrink method, novel antimicrobial surfaces have been developed by incorporating metal oxide nanoparticles (NPs) and crystal violet (CV) dye into medical-grade polyurethane sheets. This study compares the bactericidal effects of polyurethane incorporating ZnO, Mg-doped ZnO, and MgO. All metal oxide NPs are well defined, with average diameters ranging from 2 to 18 nm. These materials demonstrate potent bactericidal activity when tested against clinically relevant bacteria such as Escherichia coli and Staphylococcus aureus. Additionally, these composites are tested against an epidemic strain of methicillin-resistant Staphylococcus aureus (MRSA) that is rife in hospitals throughout the UK. Furthermore, we have tested these materials using a low light intensity (∼500 lx), similar to that present in many clinical environments. The highest activity is achieved from polymer composites incorporating CV and ∼3 nm ZnO NPs, and the different performances of the metal oxides have been discussed.

Towards Effective Photothermal/Photodynamic Treatment Using Plasmonic Gold Nanoparticles

Gold nanoparticles (AuNPs) of different size and shape are widely used as photosensitizers for cancer diagnostics and plasmonic photothermal (PPT)/photodynamic (PDT) therapy, as nanocarriers for drug delivery and laser-mediated pathogen killing, even the underlying mechanisms of treatment effects remain poorly understood. There is a need in analyzing and improving the ways to increase accumulation of AuNP in tumors and other crucial steps in interaction of AuNPs with laser light and tissues. In this review, we summarize our recent theoretical, experimental, and pre-clinical results on light activated interaction of AuNPs with tissues and cells. Specifically, we discuss a combined PPT/PDT treatment of tumors and killing of pathogen bacteria with gold-based nanocomposites and atomic clusters, cell optoporation, and theoretical simulations of nanoparticle-mediated laser heating of tissues and cells.

Facile green fabrication of nanostructure ZnO plates, bullets, flower, prismatic tip, closed pine cone: Their antibacterial, antioxidant, photoluminescent and photocatalytic properties

Green synthesis of multifunctional Zinc oxide nanoparticles (NPs) with a variety of morphologies were achieved by low temperature solution combustion route employing neem (Azadirachta indica) extract as fuel. The nanoparticles were characterized by PXRD, FTIR, XPS, Raman and UV-Visible spectroscopic studies. The Morphologies were studied by SEM and TEM analysis. The NPs were subjected for photoluminescence, photocatalytic, antibacterial and antioxidant activity studies. PXRD pattern confirmed the hexagonal wurtzite structure of the product. SEM images indicated the transformation of mushroom like hexagonal disks to bullets, buds, cones, bundles and closed pine cone structured NPs with increase in the concentration of neem extract in reaction mixture. The NPs exhibited prominent green emission due to the presence of intrinsic defect centers. The as-formed bullet shaped ZnO with 4ml of neem extract was found to decolorize Methylene blue (MB) under Sunlight and UV light irradiation. The antibacterial studies indicated that ZnO NPs of concentration 500, 750 and 1000μg resulted in significant antibacterial activity on Klebsiella aerogenes and Staphylococcus aureus but not against Escherichia coli and Pseudomonas aeruginosa in agar well diffusion method. Further, ZnO NPs exhibited significant antioxidant activity against scavenging DPPH free radicals. The current investigation demonstrated green engineering method for the synthesis of multifunctional ZnO NPs with interesting morphologies using neem extract.

Synthesis, characterization and biological evaluation of a new photoactive hydrogel against Gram-positive and Gram-negative bacteria

Development of a cheap material active against both Gram-positive and Gram-negative bacteria to be used as a novel water-sterilizing device.

Encapsulation of a photosensitizer into cell membrane capsules for photodynamic therapy

CMCs were used to encapsulate MB (CMCs@MB) using temporary permeation of the plasma membrane and resealing. Encapsulation in the CMCs leads to sustained release of MB with enhanced stability against enzymatic reduction and reduced toxicity.

Antibacterial properties of Cu–ZrO2thin films prepared via aerosol assisted chemical vapour deposition

The antibacterial properties of a Cu–ZrO₂film grownviaaerosol assisted chemical vapour deposition are presented.

Comparative study of singlet oxygen production by photosensitiser dyes encapsulated in silicone: towards rational design of anti-microbial surfaces

Theoretical and experimental toolbox for the rational design of light-activated antimicrobial surfaces.

Enhanced Bactericidal Activity of Silver Thin Films Deposited via Aerosol-Assisted Chemical Vapor Deposition

Silver thin films were deposited on SiO2-barrier-coated float glass, fluorine-doped tin oxide (FTO) glass, Activ glass, and TiO2-coated float glass via AACVD using silver nitrate at 350 °C. The films were annealed at 600 °C and analyzed by X-ray powder diffraction, X-ray photoelectron spectroscopy, UV/vis/near-IR spectroscopy, and scanning electron microscopy. All the films were crystalline, and the silver was present in its elemental form and of nanometer dimension. The antibacterial activity of these samples was tested against Escherichia coli and Staphylococcus aureus in the dark and under UV light (365 nm). All Ag-deposited films reduced the numbers of E. coli by 99.9% within 6 h and the numbers of S. aureus by 99.9% within only 2 h. FTO/Ag reduced bacterial numbers of E. coli to below the detection limit after 60 min and caused a 99.9% reduction of S. aureus within only 15 min of UV irradiation. Activ/Ag reduced the numbers of S. aureus by 66.6% after 60 min and TiO2/Ag killed 99.9% of S. aureus within 60 min of UV exposure. More remarkably, we observed a 99.9% reduction in the numbers of E. coli within 6 h and the numbers of S. aureus within 4 h in the dark using our novel TiO2/Ag system.

Potent Antibacterial Activity of Copper Embedded into Silicone and Polyurethane

A simple, easily up-scalable swell-encapsulation-shrink technique was used to incorporate small 2.5 nm copper nanoparticles (CuNPs) into two widely used medical grade polymers, polyurethane, and silicone, with no significant impact on polymer coloration. Both medical grade polymers with incorporated CuNPs demonstrated potent antimicrobial activity against the clinically relevant bacteria, methicillin-resistant Staphylococcus aureus and Escherichia coli. CuNP-incorporated silicone samples displayed potent antibacterial activity against both bacteria within 6 h. CuNP-incorporated polyurethane exhibited more efficacious antimicrobial activity, resulting in a 99.9% reduction in the numbers of both bacteria within just 2 h. With the high prevalence of hospital-acquired infections, the use of antimicrobial materials such as these CuNP-incorporated polymers could contribute to reducing microbial contamination associated with frequently touched surfaces in and around hospital wards (e.g., bed rails, overbed tables, push plates, etc.).

Functionalised gold and titania nanoparticles and surfaces for use as antimicrobial coatings

We report the preparation, characterisation and antimicrobial functional testing of various titanium dioxide and gold modified titanium dioxide nanoparticles embedded into a polysiloxane polymer by a swell dip-coating procedure. We show that the surfaces are effective in killing both Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria under different lighting conditions. The presence of the nanoparticles was of critical importance in improving the functional properties of the surface. These materials have the potential to reduce hospital-acquired infection, by killing bacteria on the polymer surface.

Incorporation of crystal violet, methylene blue and safranin O into a copolymer emulsion; the development of a novel antimicrobial paint

Crystal violet, methylene blue and safranin O were successfully incorporated into a co-polymer emulsion to make a potent antimicrobial paint.

Photosensitisation studies of silicone polymer doped with methylene blue and nanogold for antimicrobial applications

2 nm gold nanoparticle (AuNP) and methylene blue (MB) incorporated into medical-grade silicone polymer for antimicrobial applications.

Lethal photosensitisation of Staphylococcus aureus and Escherichia coli using crystal violet and zinc oxide-encapsulated polyurethane

Bactericidal polymer surfaces were prepared by crystal violet and ZnO nanoparticle encapsulation, demonstrating 99.9% dark kill ofE. coli.

The use of zinc oxide nanoparticles to enhance the antibacterial properties of light-activated polydimethylsiloxane containing crystal violet

Crystal violet–ZnO mixtures were incorporated into PDMS by a simple two step method. The modified polymer demonstrated significant antibacterial activity againstE. coliandS. aureus, showing possibly the most potent light-induced antibacterial polymer reported to date.

Photoinactivation of Candida albicans and Escherichia coli using aluminium phthalocyanine on gold nanoparticles

Conjugates of aluminium phthalocyanine with gold nanorods (AlPc–AuNRs) and nanohexagons (AlPc–AuNHs) show improved photoinactivation of fungi (C. albicans) and bacteria cells (E. coli) compared to Pc alone.

Advanced analysis of nanoparticle composites – a means toward increasing the efficiency of functional materials

Direct visualisation of embedded nanoparticles allows for quantification of their concentration, at the surface and the bulk of host matrix.

Light-activated antimicrobial surfaces with enhanced efficacy induced by a dark-activated mechanism

We report a potent antimicrobial polymer demonstrating an enhanced bactericidal activity upon white light illumination.

LED-activated methylene blue-loaded Pluronic-nanogold hybrids for in vitro photodynamic therapy

In this work we introduce a new class of multifunctional photodynamic agents based on the coupling of photosensitizer molecules with noble metal nanoparticles, which can be efficiently activated under low light intensity. The favourable modification of the photophysical properties of methylene blue (MB) in MB-loaded Pluronic-nanogold hybrids (Au-PF127-MB) increases the probability of singlet oxygen generation, which in turn allows the use of a light emitting diode (LED) irradiation source instead of commonly used, more invasive lasers. In this regard, Au-PF127-MB treated human lung carcinoma cells (HTB 177) were irradiated at different light doses, using a 660 nm LED source, the results indicating a dose dependent therapeutic effect, decreasing the cell viability down to 13%. Owing to their effectiveness, biocompatibility and integrated imaging and therapeutic functionalities, Au-PF127-MB could represent an important development in the field of biophotonic applications.

Shining light on materials--a self-sterilising revolution

This review focuses on the development of light activated antimicrobial surfaces. These surfaces kill microbes by the action of light and have potential applications in domestic and healthcare settings. The inspiration for the new self-cleaning surfaces originates from photodynamic therapy where light is used to locate and destroy tumours. The first generation photosensitiser molecules, based on a porphyrin ring structure, could be considered as bioinspired and chemically related to chlorophyll. The review looks at developments of both soft polymeric surfaces with either surface bound or impregnated photosensitiser molecules; and hard inorganic surfaces such as modified titanium dioxide. The bacterial kill mechanisms are looked into with both surface types showing primary microbial kill through a radical induced pathway. The hard inorganic surfaces also show low bacterial adherence by means of a light activated photo-wetting of the surfaces meaning that they are "Easy Clean" and wash off microbes uniformly.

Superhydrophobic photocatalytic surfaces through direct incorporation of titania nanoparticles into a polymer matrix by aerosol assisted chemical vapor deposition

A new class of superhydrophobic photocatalytic surfaces that are self-cleaning through light-induced photodegradation and the Lotus effect are presented. The films are formed in a single-step aerosol-assisted chemical vapor deposition (AACVD) process. The films are durable and show no degradation on continuous exposure to UV-C radiation.

Mini-review: Antimicrobial central venous catheters--recent advances and strategies

Central venous catheters (CVCs) nowadays constitute critical devices used in medical care, namely in intensive care units. However, CVCs also represent one of the indwelling medical devices with enhanced risk of nosocomial device-related infection. Catheter-related infections (CRIs) are a major cause of patient morbidity and mortality, often justifying premature catheter removal and an increase in costs and use of resources. Adhesion and subsequent biofilm formation on the surfaces of indwelling catheters is elemental to the onset of pathogenesis. Seeking the prevention of CVC colonisation and CRI, a variety of approaches have been studied, tested and, in some cases, already applied in clinical practice. This review looks at the current preventive strategies often used to decrease the risk of CRIs due to colonization and biofilm formation on catheter surfaces, as well as at the more recent approaches under investigation.

Photoinduced decolorization of 2, 6-dichloroindophenol by 2-anthraquinone sulfonate treated nylon

Photoactive 2-anthraquinone sulfonate sodium (2-AQS) can produce hydroxyl radical and other reactive oxygen species under UVA irradiation. Because of its acid dye like feature, 2-AQS was immobilized onto nylon fibers through an acid dyeing process, and the dyed nylon was employed as a photoactive self-cleaning material. As a model study, decolorization of representative colorants such as 2,6-dichloroindophenol (DCIP) by the material was investigated. The results revealed that DCIP was first absorbed on the fibers and then degraded by hydroxyl radicals and other reactive oxygen species generated by 2-AQS on the surfaces upon UVA exposure. The photo degradation pathway of DCIP was further studied by directly using aqueous 2-AQS solution, and the degraded products in the solutions were analyzed by LC-MS. Different light sources and hydrogen donors were investigated in degradation of DCIP. The photoactive functions on the 2-AQS-dyed nylon fibers were quite durable and maintained similar decolorization effect of DCIP after five repeated tests.