Advances in Ultra-small Fluorescence Nanoprobes for Detection of Metal Ions, Drugs, Pesticides and Biomarkers

Selective and Rapid Optical Detection of Citalopram Using a Fluorescent Probe Based on Carbon Quantum Dots Embedded in Silica Molecularly Imprinted Polymer

In this study, a citalopram optical nano-sensor was developed. Citalopram is a well-known antidepressant drug that reduces the reuptake of serotonin in neurons as a result, serotonin neurotransmission, the primary response to antidepressant treatments, increases in many parts of the brain. This study introduces a carbon quantum dots (CQDs)-based optical nanosensor for rapid detection of citalopram. This fluorescent nanosensor was made through the polymerization of tetraethyl orthosilicate in the presence of CQDs as the fluorescent materials and citalopram as the template molecule. Following the polymerization, the templated molecules were washed and removed from the structure, and the matrix of the polymer was left with some cavities that resembled citalopram in terms of size and shape. The final structure which is used as a chemical nanosensor, is named carbon quantum dots embedded silica molecularly imprinted polymer (CQDs-SMIP). The materials used in designing nano-sensors were characterized using FTIR, UV/Vis, and fluorescence spectroscopy, as well as high-resolution transmission electron microscopy (HR-TEM), and field emission scanning electron microscopy (FESEM). CQDs-SMIP showed a strong fluorescence emission at 420 nm in the absence of the template molecule. The fluorescence intensity of the nanosensor decreased in the presence of citalopram. The correlation between the extent of the fluorescence quenching and the concentration of citalopram provided the nano-sensor signal. The nano-sensor was used to measure citalopram in complex matrices such as human plasma and urine samples with remarkable selectivity and sensitivity. The detection limit of 10.3 µg.L-1 over a linear range of 100 to 700 µg.L-1, and RSD of 3.15% was obtained. This nano-sensor was applied to analyze of citalopram in plasma and human urine samples with remarkable results.

Design, Synthesis, Structural Investigation and Photo Induced Biological Investigations of Co(II), Ni(II) and Cu(II) Complexes Derived from N,O Donor Schiff Bases

A series of chelated metal complexes, [Co(LI)2] (1), [Ni(LI)2] (2), [Cu(LI)2] (3) [Co(LII)2] (4), [Ni(LII)2] (5) and [Cu(LII)2] (6) were designed and synthesized from newly synthesized Schiff bases, LI = 2-((E)-(5-(4-fluorophenyl)isoxazol-3-ylimino)methyl)-5-methylphenol and LII = 2-((E)-(5-(4-fluorophenyl)isoxazol-3-ylimino)methyl)-4-chlorophenol. The synthesized compounds were characterized by elemental analysis, nuclear magnetic resonance spectroscopy (NMR), electronic spectroscopy (UV-Vis), infrared spectroscopy (FT-IR), magnetic susceptibility (µeff), electron spin resonance spectroscopy (ESR), Thermogravimetric analysis (TGA), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), and powder X-ray diffraction analysis (P-XRD). The spectral investigations have been clearly suggested 1:2 (metal: ligand) stoichiometric complexes with square planar geometrical arrangement around the metal ion. The thermal gravimmetric analysis (TGA) of these complexes indicates greater thermal stability and various steps involved in thermal decomposition of metal complexes. The binding ability between these metal complexes and calf thymus DNA (CT-DNA) was investigated by UV-Vis, fluorescence spectroscopy and viscometric experiments, which disclosed that, the complexes interacted to CT-DNA via an intercalation binding mode. The cleavage property of metal complexes against pBR322 DNA has been explored by gel electrophoresis technique mediated by UV-illumination and H2O2, showed momentous cleavage activity. Antioxidant activity of all complexes was determined by DPPH free radical scavenging experiment and showed prominent antioxidant activity. Further, the antibacterial and antifungal activities of all compounds were screened against bacterial and fungal strains via in-vitro disc diffusion method. These studies revealed that the complexes showed comparatively more antimicrobial activity than free ligands against tested microbial strains.

Real-time intelligent detection of ethephon based on a high-throughput ratiometric fluorescent probe

Ethephon (ETH) is a common pesticide, and its overuse has resulted in a variety of health problems for humans. However, the existing ETH detection methods are tedious and time-consuming, and real-time ETH identification remains a significant difficulty. To mitigate this concern, a dual-emission ratiometric fluorescent probe Ru@ZrMOF was rationally synthesized for the detection of ETH. In the presence of ETH, the emission peak at 435 nm gradually increased, while the peak at 600 nm remained constant, accompanied by the fluorescence color change from red, pink, blue-violet to blue. The fluorescence intensity ratio (F435/F600) demonstrated two linear relations with the ETH concentration ranges at 3 - 50 μM and 50 - 500 μM, with a lowest detection limit at 1 μM. This was attributed to the formation of Zr-O-P bonds which attenuated the ligand-metal charge transfer (LMCT) process, resulting in the recovery of blue fluorescence of the ligand 2-Aminoterephthalic acid (2-APDC). To validate the practical application of the developed platform, a YOLO v5x-based WeChat applet "96 Speckles" was developed, and a 96-well plate and smartphone-embedded 3D-printed portable toolbox was designed for the real-time intelligent detection of ETH. This smart platform allows for real-time and efficient ETH analysis in various real samples including apples, pears and tomatoes.

Inulin-Coated ZnO Nanoparticles: A Correlation between Preparation and Properties for Biostimulation Purposes

Within the framework of plant biostimulation, a pivotal role is played by the achievement of low-cost, easily prepared nanoparticles for priming purposes. Therefore, in this report, two different synthetic strategies are described to engineer zinc oxide nanoparticles with an inulin coating. In both protocols, i.e., two-step and gel-like one-pot protocols, nanoparticles with a highly pure ZnO kernel are obtained when the reaction is carried out at T ≥ 40 °C, as ascertained by XRD and ATR/FTIR studies. However, a uniformly dispersed, highly homogeneous coating is achieved primarily when different temperatures, i.e., 60 °C and 40 °C, are employed in the two phases of the step-wise synthesis. In addition, a different binding mechanism, i.e., complexation, occurs in this case. When the gel-like process is employed, a high degree of coverage by the fructan is attained, leading to micrometric coated aggregates of nanometric particles, as revealed by SEM investigations. All NPs from the two-step synthesis feature electronic bandgaps in the 3.25-3.30 eV range in line with previous studies, whereas the extensive coating causes a remarkable 0.4 eV decrease in the bandgap. Overall, the global analysis of the investigations indicates that the samples synthesized at 60 °C and 40 °C are the best suited for biostimulation. Proof-of-principle assays upon Vicia faba seed priming with Zn5 and Zn5@inu indicated an effective growth stimulation of seedlings at doses of 100 mgKg-1, with concomitant Zn accumulation in the leaves.

Structural and optical properties of the Agn-tyrosine complexes (n = 3-12): a density functional theory study

We study the optical properties of Agn (n = 3-12) neutral clusters and their coordination with a tyrosine (Tyr) molecule. A global search strategy coupled with density functional theory (DFT) computations explored the potential energy surface. Adsorption energy calculations predicted that Tyr coordination stabilizes the metal clusters, favouring the Agn-Tyr complexes with an even number of silver atoms. For the Agn low-lying isomers, the general shape and the major transitions of the calculated time dependent-DFT (TD-DFT) absorption spectra align with those of previous reports measured in an argon environment. We use the analysis of non-covalent interactions to identify the specific interactions between each silver cluster and functional groups of Tyr. The TD-DFT absorption spectra for the Agn-Tyr complexes showed that Tyr significantly modifies the optical properties of the coordinated silver clusters and affects the smaller systems to a greater extent. The optical absorption results of the bare Agn clusters and the Agn-Tyr complexes are compared and discussed in detail.

Fe3O4@UiO-66-NH2 based on magnetic solid phase extraction for determination of organic UV filters in environmental water samples

In this work, a nanocomposite structured magnetic metal-organic framework named as Fe3O4@UiO-66-NH2 was prepared via a simple hydrothermal approach. The as-mentioned nanocomposite was characterized by Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction analysis (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and the Brunauer-Emmett-Teller (BET) techniques. Using the Fe3O4@UiO-66-NH2 as a nanosorbent, an easy and highly effective approach was developed to preconcentrate nine organic UV filters before gas chromatography-mass spectrometry (GC-MS) analysis. Different conditions influencing the extraction efficiency encompassing the sorbent amount, nature and volume of desorption solvent, desorption time, pH of the sample, and extraction time, were examined. Under the optimal experimental parameters, the Fe3O4@UiO-66-NH2-based magnetic solid phase extraction and GC-MS (MSPE-GC-MS) demonstrated linearity in the range of 0.03-1500 ng/L (R2 ≥ 0.9974) and the reproducibility, expressed as RSD, was ≤7.5%. The limits of detection ranged between 0.01 and 0.07 ng/L and limits of quantification were in the range of 0.03-0.4 ng/L. Finally, the suggested approach was satisfactorily utilized to determine nine organic UV filters in different water samples (analytical recoveries between 86.5% and 104.2%).

Synthesis of copper nanoclusters from Bacopa monnieri leaves for fluorescence sensing of dichlorvos

In this work, a facile one-step green synthesis was developed for the fabrication of blue fluorescent copper nanocluster (Brahmi-CuNCs) from the extract of Bacopa monnieri (common name is Brahmi) via a microwave method. The as-prepared Brahmi-CuNCs emitted blue fluorescence at 452 nm when excited at 352 nm and showed a quantum yield of 31.32%. Brahmi-derived blue fluorescent CuNCs acted as a probe for fluorescence sensing of dichlorvos. Upon the addition of dichlorvos, the blue emission for Brahmi-CuNCs was gradually turned off, favouring establishment of a calibration graph in the range 0.5-100 μM with a detection limit of 0.23 μM. The as-synthesized Brahmi-CuNCs exhibited marked sensitivity and selectivity towards dichlorvos, favourable for assaying dichlorvos in various samples (cabbage, apple juice, and rice).

Nanomaterials for fluorescent assay of bilirubin

The accumulation of bilirubin in blood is associated with many diseases. Sensitive and accurate detection of bilirubin is of great significance for personal health care. The rapid development of fluorescent nanomaterials promotes rapid development in the bilirubin assay. In this review, traditional methods for detection of bilirubin are briefly presented to compare with fluorescent nanosensors. Subsequently, the recent progress of different types of fluorescent nanomaterials for determination of bilirubin is summarized. Further, the performance of fluorescent nanosensors and conventional techniques for sensing bilirubin are compared. To this end, the challenges and prospects concerning the topics are discussed. This review will provide some introductory knowledge for researchers to understand the status and importance of fluorescent nanosensors for sensing bilirubin.

In Situ Microscopic Studies on the Interaction of Multi-Principal Element Nanoparticles and Bacteria

Multi-principal element nanoparticles are an emerging class of materials with potential applications in medicine and biology. However, it is not known how such nanoparticles interact with bacteria at nanoscale. In the present work, we evaluated the interaction of multi-principal elemental alloy (FeNiCu) nanoparticles with Escherichia coli (E. coli) bacteria using the in situ graphene liquid cell (GLC) scanning transmission electron microscopy (STEM) approach. The imaging revealed the details of bacteria wall damage in the vicinity of nanoparticles. The chemical mappings of S, P, O, N, C, and Cl elements confirmed the cytoplasmic leakage of the bacteria. Our results show that there is selective release of metal ions from the nanoparticles. The release of copper ions was much higher than that for nickel while the iron release was the lowest. In addition, the binding affinity of bacterial cell membrane protein functional groups with Cu, Ni, and Fe cations is found to be the driving force behind the selective metal cations' release from the multi-principal element nanoparticles. The protein functional groups driven dissolution of multielement nanoparticles was evaluated using the density functional theory (DFT) computational method, which confirmed that the energy required to remove Cu atoms from the nanoparticle surface was the least in comparison with those for Ni and Fe atoms. The DFT results support the experimental data, indicating that the energy to dissolve metal atoms exposed to oxidation and/or the to presence of oxygen atoms at the surface of the nanoparticle catalyzes metal removal from the multielement nanoparticle. The study shows the potential of compositional design of multi-principal element nanoparticles for the controlled release of metal ions to develop antibacterial strategies. In addition, GLC-STEM is a promising approach for understanding the nanoscale interaction of metallic nanoparticles with biological structures.