Molecular Properties of Ibuprofen and Its Solid Dispersions with Eudragit RL100 Studied by Solid-State Nuclear Magnetic Resonance

Diffusion and Exchange Kinetics of Microparticle Formulations by Spatial Fourier Transform Fluorescence Recovery after Photobleaching with Patterned Illumination

The mechanism of active pharmaceutical ingredient (API) mobility during release in microparticle formulation was investigated using periodically structured illumination combined with spatial Fourier transform fluorescence recovery after photobleaching (FT-FRAP). FT-FRAP applies structured photobleaching across a given field of view, allowing for the monitoring of molecular mobility through the analysis of recovery patterns in the FT domain. Encoding molecular mobility in the FT domain offers several advantages, including improved signal-to-noise ratio, simplified mathematical calculations, reduced sampling requirements, compatibility with multiphoton microscopy for imaging API molecules within the formulations, and the ability to distinguish between exchange and diffusion processes. To prepare microparticles for FT-FRAP analysis, a homogeneous mixture of dipyridamole and pH-independent methyl methacrylate polymer (Eudragit RS and RL) was processed using laminar jet breakup induced by vibration in a frequency-driven encapsulator. The encapsulated microparticles were characterized based on particle size distribution, encapsulation efficiency, batch size, and morphology. Utilizing FT-FRAP, the internal diffusion and exchange molecular mobility within RL and RS microparticles were discriminated and quantified. Theoretical modeling of exchange- and diffusion-controlled release revealed that both RL and RS microparticles exhibited similar exchange decay rates, but RL displayed a significantly higher diffusion coefficient. This difference in diffusion within RL and RS microparticles was correlated with their macroscopic dissolution performance.

Ternary Solid Dispersions: A Review of the Preparation, Characterization, Mechanism of Drug Release, and Physical Stability

The prevalence of active pharmaceutical ingredients (APIs) with low water solubility has experienced a significant increase in recent years. These APIs present challenges in formulation, particularly for oral dosage forms, despite their considerable therapeutic potential. Therefore, the improvement of solubility has become a major concern for pharmaceutical enterprises to increase the bioavailability of APIs. A promising formulation approach that can effectively improve the dissolution profile and the bioavailability of poorly water-soluble drugs is the utilization of amorphous systems. Numerous formulation methods have been developed to enhance poorly water-soluble drugs through amorphization systems, including co-amorphous formulations, amorphous solid dispersions (ASDs), and the use of mesoporous silica as a carrier. Furthermore, the successful enhancement of certain drugs with poor aqueous solubility through amorphization has led to their incorporation into various commercially available preparations, such as ASDs, where the crystalline structure of APIs is transformed into an amorphous state within a hydrophilic matrix. A novel approach, known as ternary solid dispersions (TSDs), has emerged to address the solubility and bioavailability challenges associated with amorphous drugs. Meanwhile, the introduction of a third component in the ASD and co-amorphous systems has demonstrated the potential to improve performance in terms of solubility, physical stability, and processability. This comprehensive review discusses the preparation and characterization of poorly water-soluble drugs in ternary solid dispersions and their mechanisms of drug release and physical stability.

Preparation of a ternary amorphous solid dispersion using hot-melt extrusion for obtaining a stable colloidal dispersion of amorphous probucol nanoparticles

In our previous reports, ternary amorphous solid dispersions (ASDs) of probucol (PBC)/polymer/surfactant were prepared by spray-drying and cryo-grinding, and colloidal dispersions of amorphous PBC nanoparticles were obtained by dispersing the ternary ASD into water. In this study, hot-melt extrusion, which is a practical method for preparing ASD formulations, to obtain ternary ASDs and colloidal dispersions of amorphous PBC nanoparticles. Polyvinylpyrrolidone (PVP) K12, with a relatively low T_g, below 100°C, was used as a polymer, while poloxamer P407 (P407), which remains chemically stable during the hot-melt extrusion process, was utilized as a surfactant. Ternary ASDs were successfully produced with high-weight ratios of PVP and P407. A hydrogen bond between the PBC hydroxyl proton and PVP carbonyl oxygen in the ternary ASD was detected using solid-state NMR spectroscopy, which suggested that amorphous PBC was mainly stabilized by PVP. Stable colloidal dispersions of amorphous PBC nanoparticles were obtained from the PBC/PVP/P407 ASD, at a weight ratio of 1:4:2. The mean particle size was below 200 nm and the amorphous state of PBC remained stable upon storage at 25°C for 14 d. Solution-state ¹H NMR and zeta-potential measurements suggested that P407 mainly stabilized the colloidal dispersion of amorphous PBC nanoparticles, by steric hindrance at the solid/liquid interface. The findings of this study demonstrate that, similar to spray-drying, hot-melt extrusion can form practical ternary ASDs that provide colloidal dispersion of amorphous drug nanoparticles. Thus, this study advocates for the use of hot-melt extrusion in the design of an amorphous formulation for a variety of poorly water-soluble drugs.

Variable-Temperature NMR Analysis of the Thermodynamics of Polymer Partitioning between Aqueous and Drug-Rich Phases and Its Significance for Amorphous Formulations

We previously reported that the polymers used in amorphous solid dispersion (ASD) formulations, such as polyvinylpyrrolidone (PVP), polyvinylpyrrolidone/vinyl acetate (PVP-VA), and hypromellose (HPMC), distribute into the drug-rich phase of ibuprofen (IBP) formed by liquid-liquid phase separation, resulting in a reduction in the maximum drug supersaturation in the aqueous phase. Herein, the mechanism underlying the partitioning of the polymer into the drug-rich phase was investigated from a thermodynamic perspective. The dissolved IBP concentration in the aqueous phase and the amount of polymer distributed into the IBP-rich phase were quantitatively analyzed in IBP-supersaturated solutions containing different polymers using variable-temperature solution-state nuclear magnetic resonance (NMR) spectroscopy. The polymer weight ratio in the IBP-rich phase increased at higher temperatures, leading to a more notable reduction of IBP amorphous solubility. Among the polymers, the amorphous solubility reduction was the greatest for the PVP-VA solution at lower temperatures, while HPMC reduced the amorphous solubility to the greatest extent at higher temperatures. The change in the order of polymer impact on the amorphous solubility resulted from the differences in the temperature dependency of polymer partitioning. The van't Hoff plot of the polymer partition coefficient revealed that both enthalpy and entropy changes for polymer transfer into the IBP-rich phase from the aqueous phase (ΔH_{aqueous→IBP-rich} and ΔS_{aqueous→IBP-rich}) gave positive values for most of the measured temperature range, indicating that polymer partitioning into the IBP-rich phase was an endothermic but entropically favorable process. The polymer transfer into the IBP-rich phase was more endothermic for HPMC than for PVP and PVP-VA. The solid-state NMR analysis of the IBP/polymer ASD implied that the newly formed IBP/polymer interactions in the IBP-rich phase upon polymer incorporation were weaker for HPMC, providing a rationale for the larger positive transfer enthalpy for HPMC. The change in Gibbs free energy for polymer transfer (ΔG_{aqueous→IBP-rich}) showed negative values across the experimental temperature range, decreasing with an increase in temperature, indicating that the distribution of the polymer into the IBP-rich phase is favored at higher temperatures. Moreover, ΔG_{aqueous→IBP-rich} for HPMC showed the greatest decrease with the temperature, likely reflecting the temperature-induced dehydration of HPMC in the aqueous phase. This study contributes fundamental insights into the phenomenon of polymer partitioning into drug-rich phases, furthering the understanding of achievable supersaturation levels and ultimately providing information on polymer selection for ASD formulations.

Looking into the dynamics of molecular crystals of ibuprofen and terephthalic acid using 17 O and 2 H nuclear magnetic resonance analyses

Oxygen-17 and deuterium are two quadrupolar nuclei that are of interest for studying the structure and dynamics of materials by solid-state nuclear magnetic resonance (NMR). Here, 17 O and 2 H NMR analyses of crystalline ibuprofen and terephthalic acid are reported. First, improved 17 O-labelling protocols of these molecules are described using mechanochemistry. Then, dynamics occurring around the carboxylic groups of ibuprofen are studied considering variable temperature 17 O and 2 H NMR data, as well as computational modelling (including molecular dynamics simulations). More specifically, motions related to the concerted double proton jump and the 180° flip of the H-bonded (-COOH)2 unit in the crystal structure were looked into, and it was found that the merging of the C=O and C-OH 17 O resonances at high temperatures cannot be explained by the sole presence of one of these motions. Lastly, preliminary experiments were performed with a 2 H-17 O diplexer connected to the probe. Such configurations can allow, among others, 2 H and 17 O NMR spectra to be recorded at different temperatures without needing to tune or to change probe configurations. Overall, this work offers a few leads which could be of use in future studies of other materials using 17 O and 2 H NMR.

Revealing the mechanism of morphological variation of amorphous drug nanoparticles formed by aqueous dispersion of ternary solid dispersion

Probucol (PBC)/hypromellose (HPMC)/sodium dodecyl sulfate (SDS) ternary solid dispersions (SDs) of various weight ratios were prepared and evaluated to unveil the effect of HPMC and SDS on the formation of amorphous PBC nanoparticles. The morphological variation of the PBC nanoparticles prepared using SDs of different compositions was determined using dynamic light scattering and cryogenic transmission electron microscopy (cryo-TEM). Statistical analysis of particle size versus roundness of PBC nanoparticles was carried out based on cryo-TEM images. A clear correlation was observed between the morphologies of the PBC nanoparticles and the amounts of HPMC and SDS, either admixed in SDs or pre-dissolved in an aqueous solution. The admixed HPMC in SDs was demonstrated to play the major role in determining the primary particle sizes of discrete amorphous PBC nanoparticles. Based on ¹³C solid-state NMR spectroscopy, this phenomenon should be due to the enlarged size of the PBC-rich domains in SDs, which depended on the decreasing amounts of admixed HPMC. Although the pre-dissolved part of HPMC had less impact on the primary particle sizes, it was found to inhibit the particle agglomeration and recrystallization of amorphous PBC nanoparticles. On the other hand, sufficient SDS admixed in SDs could suppress the size enhancement of the PBC-rich domains during water immersion and nanoparticle evolution (agglomeration and crystallization) after aqueous dispersion. The pre-dissolved SDS could restrain the agglomeration of amorphous PBC nanoparticles, ultimately forming hundreds of irregular nanometer-order structures. Since the increase in size during water immersion, their sizes were still slightly larger than those obtained with a high portion of admixed SDS. The findings of this study clarified the usefulness and necessity of adding polymers and surfactants to SDs to fabricate drug nanoparticle formulations.

High Sensitivity Detection of a Solubility Limiting Surface Transformation of Drug Particles by DNP SENS

We investigate the presence of a surface species for the active pharmaceutical ingredient (API) AZD9496 with dynamic nuclear polarization surface enhanced nuclear spectroscopy (DNP SENS). We show that using DNP we can elucidate the presence of an amorphous form of the API at the surface of crystalline particles of the salt form. The amorphous form of the API has distinguishable ¹³C chemical shifts when compared to the salt form under various acidic conditions. The predominant form in frozen particles of AZD9496 is the salt, and we provide evidence to suggest that the amorphous layer at the surface is mainly made up of the dissociated free form.

Analytical and Computational Methods for the Estimation of Drug-Polymer Solubility and Miscibility in Solid Dispersions Development

The development of stable solid dispersion formulations that maintain desired improvement of drug dissolution rate during the entire shelf life requires the analysis of drug-polymer solubility and miscibility. Only if the drug concentration is below the solubility limit in the polymer, the physical stability of solid dispersions is guaranteed without risk for drug (re)crystallization. If the drug concentration is above the solubility, but below the miscibility limit, the system is stabilized through intimate drug-polymer mixing, with additional kinetic stabilization if stored sufficiently below the mixture glass transition temperature. Therefore, it is of particular importance to assess the drug-polymer solubility and miscibility, to select suitable formulation (a type of polymer and drug loading), manufacturing process, and storage conditions, with the aim to ensure physical stability during the product shelf life. Drug-polymer solubility and miscibility can be assessed using analytical methods, which can detect whether the system is single-phase or not. Thermodynamic modeling enables a mechanistic understanding of drug-polymer solubility and miscibility and identification of formulation compositions with the expected formation of the stable single-phase system. Advance molecular modeling and simulation techniques enable getting insight into interactions between the drug and polymer at the molecular level, which determine whether the single-phase system formation will occur or not.

Dynamics of Clay-Intercalated Ibuprofen Studied by Solid State Nuclear Magnetic Resonance

In designing drug delivery systems with improved release properties and bioavailability, the dynamic features of the active pharmaceutical ingredient can be crucial for the final product properties. In this work, we aimed at obtaining the first characterization of the molecular dynamic properties of one of the most common nonsteroidal anti-inflammatory drug, ibuprofen, intercalated in hydrotalcite, an interesting inorganic carrier. By exploiting a variety of solid state NMR techniques, including ¹H and ¹³C MAS spectra and T₁ relaxation measurements, performed at variable temperature and carrying out a synergic analysis of all results, it has been possible to ascertain that the mobility of ibuprofen within the carrier is remarkably increased. In particular, strong indications have been obtained that ibuprofen molecules, in addition to internal interconformational dynamics, experience an overall molecular motion. Also considering that ibuprofen is "anchored" to the charged surface of the hydrotalcite layers through its carboxylate moiety, such motion could be a wobbling-in-a-cone. Activation energies and correlation times of all the motions of intercalated ibuprofen have been determined.

Solubilization of ibuprofen for freeze dried parenteral dosage forms

Ibuprofen, a weakly acidic non-steroidal anti-inflammatory drug having poor aqueous solubility, is a challenging drug for the development of pharmaceutical formulations, resulting in numerous research attempts focusing on improvement of its solubility and consequently bioavailability. Most studies have been done for solid dosage forms, with very little attention paid to parenterals. Hence, the main purpose of the present study was to enhance ibuprofen solubility as a result of formulation composition and the freeze drying process. Moreover, the purpose was to prepare a freeze dried dosage form with improved ibuprofen solubility that could, after simple reconstitution with water for injection, result in an isotonic parenteral solution. Solubility of ibuprofen was modified by various excipients suitable for parenteral application. Drug interactions with selected excipients in the final product/lyophilisate were studied by a combined use of XRPD, DSC, Raman and ss-NMR. Analyses of lyophilized samples showed solubility enhancement of ibuprofen and in situ formation of an ibuprofen salt with the alkaline excipients used.

Controlling the Release of Indomethacin from Glass Solutions Layered with a Rate Controlling Membrane Using Fluid-Bed Processing. Part 2: The Influence of Formulation Parameters on Drug Release

This study aimed to investigate the pharmaceutical performance of an indomethacin-polyvinylpyrrolidone (PVP) glass solution applied using fluid bed processing as a layer on inert sucrose spheres and subsequently top-coated with a release rate controlling membrane consisting of either ethyl cellulose or Eudragit RL. The implications of the addition of a pore former (PVP) and the coating medium (ethanol or water) on the diffusion and release behavior were also considered. In addition, the role of a charge interaction between drug and controlled release polymer on the release was investigated. Diffusion experiments pointed to the influence of pore former concentration, rate controlling polymer type, and coating solvent on the permeability of the controlled release membranes. This can be translated to drug release tests, which show the potential of diffusion tests as a preliminary screening test and that diffusion is the main factor influencing release. Drug release tests also showed the effect of coating layer thickness. A charge interaction between INDO and ERL was demonstrated, but this had no negative effect on drug release. The higher diffusion and release observed in ERL-based rate controlling membranes was explained by a higher hydrophilicity, compared to EC.

Dynamics and interactions of ibuprofen in cyclodextrin nanosponges by solid-state NMR spectroscopy

Two different formulations of cyclodextrin nanosponges (CDNS), obtained by polycondensation of β-cyclodextrin with ethylenediaminetetraacetic acid dianhydride (EDTAn), were treated with aqueous solutions of ibuprofen sodium salt (IbuNa) affording hydrogels that, after lyophilisation, gave two solid CDNS-drug formulations. ¹H fast MAS NMR and ¹³C CP-MAS NMR spectra showed that IbuNa was converted in situ into its acidic and dimeric form (IbuH) after freeze-drying. ¹³C CP-MAS NMR spectra also indicated that the structure of the nanosponge did not undergo changes upon drug loading compared to the unloaded system. However, the ¹³C NMR spectra collected under variable contact time cross-polarization (VCT-CP) conditions showed that the polymeric scaffold CDNS changed significantly its dynamic regime on passing from the empty CDNS to the drug-loaded CDNS, thus showing that the drug encapsulation can be seen as the formation of a real supramolecular aggregate rather than a conglomerate of two solid components. Finally, the structural features obtained from the different solid-state NMR approaches reported matched the information from powder X-ray diffraction profiles.

Non-Sink Dissolution Conditions for Predicting Product Quality and In Vivo Performance of Supersaturating Drug Delivery Systems

With recent advances in the development of supersaturating oral dosage forms for poorly water-soluble drugs, pharmaceutical scientists are increasingly applying in vitro dissolution testing under non-sink conditions for a direct evaluation of their ability to generate and maintain supersaturation as a predictive surrogate for ensuring product quality and in vivo performance. However, the scientific rationale for developing the appropriate non-sink dissolution methodologies has not been extensively debated. This calls for a comprehensive discussion of recent research efforts on theoretical and experimental considerations of amorphous solubility, liquid-liquid phase separation, and phase transitions of drugs in a supersaturated solution when dissolution testing is performed under supersaturated non-sink conditions. In addition, we outline the concept of "sink index" that quantifies the magnitude of deviations from perfect sink dissolution conditions in the sink/non-sink continuum and some considerations of non-sink dissolution testing for marketed drug products. These factors should be carefully considered in recommending an adequately discriminatory dissolution method in the performance assessment of supersaturating drug delivery systems.

Formation of Organic Molecular Nanocrystals under Soft Confinement

Methods to produce nano-sized organic molecular crystals in thin films are of great interest in the pharmaceutical industry due to the potential benefit of increased solubility of poorly soluble drugs and the advantages of film-based dosage forms over traditional tablet/capsule-based dosage form. One method to directly form organic nanocrystals is by crystallization in confined environments where the overall crystallization volume is constrained. We report the use of a novel solution impregnation method to form nanocrystals in polymer matrices with various microstructures in order to study the structure of the confined nanocrystals and the role of soft confinement and polymer chemistry on the nucleation process of nano-sized crystals. The particle diameter correlates with the microstructure of the polymer matrices and the nucleation kinetics. In addition, by carefully choosing the experimental conditions and the polymer matrix, polymorph control of nanocrystals can be achieved. Solid-state nuclear magnetic resonance (ssNMR) was used to examine the local structure of nanocrystals inside the polymer matrices and crystal polymer interactions. This method may serve as a novel formulation method to obtain nanocrystals of poorly soluble active pharmaceutical ingredients (APIs) for pharmaceutical industry.

Mechanistic insight into the dramatic improvement of probucol dissolution in neutral solutions by solid dispersion in Eudragit E PO with saccharin

Objectives

Solid dispersion using Eudragit E PO (EPO) improves the dissolution of poorly water-soluble drugs in acidic solutions; however, the dissolution extremely decreases in neutral solutions. In this report, ternary solid dispersions containing probucol (PBC), EPO, and saccharin (SAC) were prepared to enable high drug dissolution at neutral pH.

Methods

Cryogenic-grinding was used to obtain ternary solid dispersions. Dissolution tests at neutral pH values were conducted to confirm the usefulness of the cryogenic-ground mixture (cryo-GM). The molecular state of each component and intermolecular interactions in the ternary cryo-GM were evaluated using powder X-ray diffraction (PXRD) and 13C solid-state NMR including spin-lattice relaxation time evaluation.

Key findings

PBC dispersed in ternary cryo-GM had an improved dissolution in neutral solutions. PBC and SAC were in amorphous states in EPO polymer matrices. The weak hydrophobic interaction between PBC and EPO and the ionic bond or hydrogen bond between EPO and SAC were demonstrated. These two molecular interactions improved the dissolution of PBC in neutral solutions.

Conclusion

Preparation of ternary solid dispersion is a potential method of improving drug solubility and absorption.

Crystallization of Probucol in Nanoparticles Revealed by AFM Analysis in Aqueous Solution

The crystallization behavior of a pharmaceutical drug in nanoparticles was directly evaluated by atomic force microscopy (AFM) force curve measurements in aqueous solution. A ternary spray-dried sample (SPD) was prepared by spray drying the organic solvent containing probucol (PBC), hypromellose (HPMC), and sodium dodecyl sulfate (SDS). The amorphization of PBC in the ternary SPD was confirmed by powder X-ray diffraction (PXRD) and solid-state 13C NMR measurements. A nanosuspension containing quite small particles of 25 nm in size was successfully prepared immediately after dispersion of the ternary SPD into water. Furthermore, solution-state 1H NMR measurements revealed that a portion of HPMC coexisted with PBC as a mixed state in the freshly prepared nanosuspension particles. After storing the nanosuspension at 25 °C, a gradual increase in the size of the nanoparticles was observed, and the particle size changed to 93.9 nm after 7 days. AFM enabled the direct observation of the morphology and agglomeration behavior of the nanoparticles in water. Moreover, AFM force-distance curves were changed from (I) to (IV), depending on the storage period, as follows: (I) complete indentation within an applied force of 1 nN, (II) complete indentation with an applied force of 1-5 nN, (III) partial indentation with an applied force of 5 nN, and (IV) nearly no indentation with an applied force of 5 nN. This stiffness increase of the nanoparticles was attributed to gradual changes in the molecular state of PBC from the amorphous to the crystal state. Solid-state 13C NMR measurements of the freeze-dried samples demonstrated the presence of metastable PBC Form II crystals in the stored nanosuspension, strongly supporting the AFM results.

Bisoprolol and bisoprolol-valsartan compatibility studied by differential scanning calorimetry, nuclear magnetic resonance and X-ray powder diffractometry

Purpose

The objective of this study was to evaluate the thermal behavior of crystalline and amorphous bisoprolol fumarate and its compatibility with amorphous valsartan. This pharmacologically relevant drug combination is a potential candidate for fixed-dose combination formulation.

Methods

DSC and TMDSC were used to examine thermal behavior of bisoprolol fumarate. SSNMR and XRPD were applied to probe the solid state forms. The thermal behavior of physical mixtures with different concentrations of bisoprolol and valsartan were examined by DSC and TMDSC, and the observed interactions were investigated by XRPD, solution- and solid-state NMR.

Results

The phase transitions from thermal methods and solid-state NMR spectra of crystalline and amorphous bisoprolol fumarate are reported. Strong interactions between bisoprolol fumarate and valsartan were observed above 60 C, resulting in the formation of a new amorphous material. Solution- and solid-state NMR provided insight into the molecular nature of the incompatibility.

Conclusions

A combined analysis of thermal methods, solution- and solid-state NMR and XRPD experiments allowed the investigation of the conformational and dynamic properties of bisoprolol fumarate. Since bisoprolol fumarate and valsartan react to form a new amorphous product, formulation of a fixed-dose combination would require separate reservoirs for bisoprolol and valsartan to prevent interactions. Similar problems might be expected with other excipients or APIs containing carboxylic groups.

Electronic supplementary material

The online version of this article (doi:10.1007/s11095-014-1471-7) contains supplementary material, which is available to authorized users.

Freezing of Molecular Motions Probed by Cryogenic Magic Angle Spinning NMR

Cryogenic magic angle spinning makes it possible to obtain the NMR spectra of solids at temperatures low enough to freeze out most molecular motions. We have applied cryogenic magic angle spinning NMR to a crystalline small-molecule solid (ibuprofen sodium salt), which displays a variety of molecular dynamics. Magic angle (13)C NMR spectra are shown for a wide range of temperatures, including in the cryogenic regime down to 20 K. The hydrophobic and hydrophilic regions of the molecular structure display different behavior in the cryogenic regime, with the hydrophilic region remaining well-structured, while the hydrophobic region exhibits a broad frozen conformational distribution.

Solvent-free dynamic nuclear polarization of amorphous and crystalline ortho-terphenyl

Dynamic nuclear polarization (DNP) of amorphous and crystalline ortho-terphenyl (OTP) in the absence of glass forming agents is presented in order to gauge the feasibility of applying DNP to pharmaceutical solid-state nuclear magnetic resonance experiments and to study the effect of intermolecular structure, or lack thereof, on the DNP enhancement. By way of (1)H-(13)C cross-polarization, we obtained a DNP enhancement (ε) of 58 for 95% deuterated OTP in the amorphous state using the biradical bis-TEMPO terephthalate (bTtereph) and ε of 36 in the crystalline state. Measurements of the (1)H T1 and electron paramagnetic resonance experiments showed the crystallization process led to phase separation of the polarization agent, creating an inhomogeneous distribution of radicals within the sample. Consequently, the effective radical concentration was decreased in the bulk OTP phase, and long-range (1)H-(1)H spin diffusion was the main polarization propagation mechanism. Preliminary DNP experiments with the glass-forming anti-inflammation drug, indomethacin, showed promising results, and further studies are underway to prepare DNP samples using pharmaceutical techniques.

Effects of spray drying process parameters on the solubility behavior and physical stability of solid dispersions prepared using a laboratory-scale spray dryer

PURPOSE

The purpose of this study is to determine the process parameters of the laboratory-scale spray dryer affecting the solubility behavior and physical stability of solid dispersions.

METHODS

Solid dispersions of the model drug (nilvadipine or nifedipine) and hypromellose (HPMC) (w/w: 1/1) were prepared using the laboratory-scale spray dryer. As process parameters, nitrogen flow rate, sample concentration and pump speed were investigated. The samples were characterized by dissolution tests, powder X-ray diffraction (PXRD), differential scanning calorimetry (DSC), scanning electron microscope (SEM), and nanoscale thermal analysis (Nano-TA). The physical stability was monitored after 7 months storage at 25°C.

RESULTS

Solubility behavior and physical stability were improved by setting the low nitrogen flow rate and high sample concentration. DSC showed that the physical state depends on the spray drying conditions, whereas, every sample showed the similar morphology from SEM results. The difference of solubility behavior and physical stability were found to come from the microstructural phase separation of the spray dried particles using a novel analytical technique (Nano-TA).

CONCLUSIONS

This study demonstrated that nitrogen flow rate and sample concentration should be the critical parameters for the enhancements of the solubility and physical stability of solid dispersions.

Investigation for the amorphous state of ER-34122, a dual 5-lipoxygenase/cyclooxygenase inhibitor with poor aqueous solubility, in HPMC solid dispersion prepared by the solvent evaporation method

ER-34122, a poorly water-soluble dual 5-lipoxygenase/cyclooxygenase inhibitor, exists as a crystalline form. According to an Oak Ridge thermal ellipsoid plot drawing, carbonyl oxygen O (5) makes an intermolecular hydrogen bond with the hydrogen bonded to N (3) in the crystal structure. The FTIR and the solid-state ¹³C NMR spectra suggest that the network is spread out in the amorphous state and the hydrogen bonding gets weaker than that in the crystalline phase, because the carbonyl signals significantly shift in both spectra. When amorphous ER-34122 was heated, crystallization occurred at around 140°C. Similar crystallization happened in the solid dispersion; however, the degree of crystallization was much lower than that observed in the pure amorphous material. Also, the DSC thermogram of the solid dispersion did not show any exothermic peaks implying crystallization. The heat of fusion (ΔHf) determined in the pure amorphous material was nearly equal to that for the crystalline form, whereas the ΔHf value obtained in the solid dispersion was less than a third of them. These data prove that crystallization of the amorphous form is dramatically restrained in the solid dispersion system. The carbonyl wavenumber shifts in the FTIR spectra indicate that the average hydrogen bond in the solid dispersion is lower than that in the pure amorphous material. Therefore, HPMC will suppress formation of the intermolecular network observed in ER-34122 crystal and preserve the amorphous state, which is thermodynamically less stable, in the solid dispersed system.

Solid-state nuclear magnetic resonance study of the physical stability of electrospun drug and polymer solid solutions

A major challenge in utilizing the amorphous form of an active pharmaceutical ingredient (API) in a final oral dosage form is preventing crystallization over time and ensuring stability. One method to improve stability is lowering the mobility of an API by formulating as a solid solution with an excipient. In this work, we use electrospinning to prepare solid solutions of API, aliskiren (SPP) or indomethacin (IND), and a polymer, polyvinylpyrrolidone (PVP). The stability of the solid solutions over 6-month storage in a desiccator at 40 °C was investigated. Using X-ray diffraction and differential scanning calorimetry, it was determined that no crystals were present in the four formulations tested--1:1 SPP-PVP, 4:1 SPP-PVP, 1:1 IND-PVP, and 2:1 IND-PVP at any time. Solid-state nuclear magnetic resonance relaxation time measurements were used to determine whether phase separation of the API and polymer occurred during the study period. It was found that all formulations remained homogeneous down to at least a 2-10 nm length scale, indicating that for these APIs, electrospinning is an acceptable method for forming stable amorphous solid solutions.

Dynamics by solid-state NMR: detailed study of ibuprofen Na salt and comparison with ibuprofen

The various internal rotations and interconformational jumps of the Na-salt form of ibuprofen in the solid state were characterized in detail by means of the simultaneous analysis of a variety of low- and high-resolution NMR experiments aimed at measuring several (13)C and (1)H spectral and relaxation properties at different temperatures and frequencies. The results were first qualitatively analyzed to identify the motions of the different molecular fragments and to assign them to specific frequency regimes (slow, <10(3) Hz; intermediate, 10(3)-10(6) Hz; and fast, >10(6) Hz). Subsequently, a simultaneous fit of the experimental data sets most sensitive to each frequency range was performed by using suitable motional models, thus obtaining, for each motion, correlation times and activation energies. The motions so characterized were: the rotations of the three methyl groups and of the isobutyl group, occurring in the fast regime, and the π-flip of the phenyl ring, belonging to the intermediate motional regime. The results obtained for the Na-salt form were compared with those of the acidic form of ibuprofen, previously obtained from a similar solid-state NMR approach: despite the very similar chemical structure of the two compounds, their dynamic properties in the solid state are noticeably different.

Detailed characterization of the dynamics of ibuprofen in the solid state by a multi-technique NMR approach

The internal rotations and interconformational jumps of ibuprofen in the solid state are fully characterized by the simultaneous analysis of a variety of low- and high-resolution NMR experiments for the measurement of several (13)C and (1)H spectral and relaxation properties, performed at different temperatures and, in some cases, frequencies. The results are first qualitatively analyzed to identify the motions of the different molecular fragments and to assign them to specific frequency ranges (slow, <10(3) Hz; intermediate, 10(3)-10(6) Hz; and fast, >10(6) Hz). In a second step, a simultaneous fit of the experimental data sets most sensitive to each frequency range is performed by means of suitable motional models to obtain, for each motion, values of correlation times and activation energies. The rotations of the three methyl groups around their ternary symmetry axes, which occur in the fast regime, are characterized by slightly different activation energies. Thanks to the simultaneous analysis of (1)H and (13)C data, the π-flip of the dimeric structure made by the acidic groups is also identified and seen to occur in the fast regime. On the contrary, the π-flip of the phenyl ring is found to occur in the slow motional regime, while the rotations of the isobutyl and propionic groups are frozen. The approach used appears to be of general applicability for studying the dynamics of small organic molecules.

Analysis of amorphous solid dispersions using 2D solid-state NMR and (1)H T(1) relaxation measurements

Solid-state NMR (SSNMR) can provide detailed structural information about amorphous solid dispersions of pharmaceutical small molecules. In this study, the ability of SSNMR experiments based on dipolar correlation, spin diffusion, and relaxation measurements to characterize the structure of solid dispersions is explored. Observation of spin diffusion effects using the 2D (1)H-(13)C cross-polarization heteronuclear correlation (CP-HETCOR) experiment is shown to be a useful probe of association between the amorphous drug and polymer that is capable of directly proving glass solution formation. Dispersions of acetaminophen and indomethacin in different polymers are examined using this approach, as well as (1)H double-quantum correlation experiments to probe additional structural features. (1)H-(19)F CP-HETCOR serves a similar role for fluorinated drug molecules such as diflunisal in dispersions, providing a rapid means to prove the formation of a glass solution. Phase separation is detected using (13)C, (19)F, and (23)Na-detected (1)H T(1) experiments in crystalline and amorphous solid dispersions that contain small domains. (1)H T(1) measurements of amorphous nanosuspensions of trehalose and dextran illustrate the ability of SSNMR to detect domain size effects in dispersions that are not glass solutions via spin diffusion effects. Two previously unreported amorphous solid dispersions involving up to three components and containing voriconazole and telithromycin are analyzed using these experiments to demonstrate the general applicability of the approach.