Polyamide Nanocapsules and Nano-emulsions Containing Parsol® MCX and Parsol® 1789: In Vitro Release, Ex Vivo Skin Penetration and Photo-Stability Studies

Nanoparticles as a Therapeutic Delivery System for Skin Cancer Prevention and Treatment

The use of nanoparticles (NPs) as a therapeutic delivery system has expanded markedly over the past decade, particularly regarding applications targeting the skin. The delivery of NP-based therapeutics to the skin requires special consideration owing to its role as both a physical and immunologic barrier, and specific technologies must not only take into consideration the target but also the pathway of delivery. The unique challenge this poses has been met with the development of a wide panel of NP-based technologies meant to precisely address these considerations. In this review article, we describe the application of NP-based technologies for drug delivery targeting the skin, summarize the types of NPs, and discuss the current landscape of NPs for skin cancer prevention and skin cancer treatment as well as future directions within these applications.

Nanocarriers and Microcarriers for Enhancing the UV Protection of Sunscreens: An Overview

This review addresses a major question of importance to pharmaceutical scientists: how can novel drug delivery systems play a role in maximizing the UV protection of sunscreens? Because more and more people are being diagnosed with skin cancer each year than all other cancers combined, adequate sun protective measures are pivotal. In this context, the present review is to give an up-to-date overview on the different nanocarrier systems that have been explored so far for encapsulating different types of UV filters present on the market. The aim of these carrier systems is to prevent skin penetration and to enhance the photoprotective potential of sunscreen actives. For each supramolecular system, a brief description along with the studies, achievements, and pitfalls, on the type of UV actives inside them, ranging from classical UV filters to new generation of UV actives is given. A brief overview of UV filters encapsulated in microcarriers is also discussed.

β-Glucan Grafted Microcapsule, a Tool for Studying the Immunomodulatory Effect of Microbial Cell Wall Polysaccharides

β-(1,3)-Glucan is one of the antigenic components of the bacterial as well as fungal cell wall. We designed microcapsules (MCs) ligated with β-(1,3)-glucan, to study its immunomodulatory effect. The MCs were obtained by interfacial polycondensation between diacyl chloride (sebacoyl chloride and terephtaloyl chloride) and diethylenetriamine in organic and aqueous phases, respectively. Planar films were first designed to optimize monomer compositions and to examine the kinetics of film formation. MCs with aqueous fluorescent core were then obtained upon controlled emulsification-polycondensation reactions using optimized monomer compositions and adding fluorescein into the aqueous phase. The selected MC-formulation was grafted with Curdlan, a linear β-(1,3)-glucan from  Agrobacterium species or branched β-(1,3)-glucan isolated from the cell wall of Aspergillus fumigatus. These β-(1,3)-glucan grafted MCs were phagocytosed by human monocyte-derived macrophages, and stimulated cytokine secretion. Moreover, the blocking of dectin-1, a β-(1,3)-glucan recognizing receptor, did not completely inhibit the phagocytosis of these β-(1,3)-glucan grafted MCs, suggesting the involvement of other receptors in the recognition and uptake of β-(1,3)-glucan. Overall, grafted MCs are a useful tool for the study of the mechanism of phagocytosis and immunomodulatory effect of the microbial polysaccharides.

Comparing in vivo biodistribution with radiolabeling and Franz cell permeation assay to validate the efficacy of both methodologies in the evaluation of nanoemulsions: a safety approach

The Franz cells permeation assay has been performed for over 25 years. However, the advent of nanotechnology created a whole new world, especially with regard to topical products. In this new global scenario an increasing number of nanostructure-based delivery systems (NDSs) have emerged and a global warning relating to the safety of these NDSs is arising. This work studied the efficacy of the Franz cells assay, comparing it with the radiolabeling biodistribution test. For this purpose a formulation of sunscreen based on an NDS was developed and characterized. The results demonstrated both that the NDS did not present in vitro cytotoxicity and that the radiolabeling biodistribution test is more precise for the evaluation of NDS cosmetics than the Franz cells assay, since it detected the permeation of the NDS at a picogram order. Due to this fact, and considering all the concerns related to NDSs and nanoparticles in general, more precise methods must be used in order to guarantee the safe use of these new classes of products.

Photon Harvesting in Sunscreen-Based Functional Nanoparticles

The ultraviolet light component in the solar spectrum is known to cause several harmful effects, such as allergy, skin ageing, and skin cancer. Thus, current research attention has been paid to the design and fundamental understanding of sunscreen-based materials. One of the most abundantly used sunscreen molecules is Avobenzone (AB), which exhibits two tautomers. Here, we highlight the preparation of spherically shaped nanoparticles from the sunscreen molecule AB as well as from sunscreen-molecule-encapsulated polymer nanoparticles in aqueous media and study their fundamental photophysical properties by steady-state and time-resolved spectroscopy. Steady-state studies confirm that the AB molecule is in the keto and enol forms in tetrahydrofuran, whereas the enol form is stable in the case of both AB nanoparticles and AB-encapsulated poly(methyl methacrylate) (PMMA) nanoparticles. Thus, the keto-enol transformation of AB molecules is restricted to a nanoenvironment. An enhancement of photostability in both the nanoparticle and PMMA-encapsulated forms under UV light irradiation is observed. The efficient excited energy transfer (60 %) from AB to porphyrin molecules opens up further prospects in potential applications as light-harvesting systems.

In vitro skin models as a tool in optimization of drug formulation

(Trans)dermal drug therapy is gaining increasing importance in the modern drug development. To fully utilize the potential of this route, it is important to optimize the delivery of active ingredient/drug into/through the skin. The optimal carrier/vehicle can enhance the desired outcome of the therapy therefore the optimization of skin formulations is often included in the early stages of the product development. A rational approach in designing and optimizing skin formulations requires well-defined skin models, able to identify and evaluate the intrinsic properties of the formulation. Most of the current optimization relies on the use of suitable ex vivo animal/human models. However, increasing restrictions in use and handling of animals and human skin stimulated the search for suitable artificial skin models. This review attempts to provide an unbiased overview of the most commonly used models, with emphasis on their limitations and advantages. The choice of the most applicable in vitro model for the particular purpose should be based on the interplay between the availability, easiness of the use, cost and the respective limitations.

Preparation and characterization of novel functionalized prochloraz microcapsules using silica-alginate-elements as controlled release carrier materials

Controlled release formulation of pesticides is an effective approach to achieve the desirable purpose of increasing the utilization of pesticides and reducing the environmental residuals. In this work, a novel functionalized microcapsule using silica cross-linked with alginate, and some beneficial elements to crops, was prepared. The microcapsules were structurally characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, and X-ray photoelectron spectroscopy. The results showed that the microcapsules had a high loading efficiency of prochloraz (about 30% w/w) and could effectively protect prochloraz against degradation under UV irradiation and alkaline conditions, showed sustainable release for at least 60 days, and also likely increased disease resistance due to the element on the surface. Given the advantages of the microcapsules, this delivery system may be extended to other photosensitive or pH-sensitive pesticides in the future.

Lipid nanoparticles based on butyl-methoxydibenzoylmethane: in vitro UVA blocking effect

The aim of the present study was to obtain efficient lipid nanoparticles loaded with butyl-methoxydibenzoylmethane (BMDBM) in order to develop cosmetic formulations with enhanced UVA blocking effect. For this purpose, two adequate liquid lipids (medium chain triglycerides and squalene) have been used in combination with two solid lipids (cetyl palmitate and glyceryl stearate) in order to create appropriate nanostructured carriers with a disordered lipid network able to accommodate up to 1.5% BMDBM. The lipid nanoparticles (LNs) were characterized in terms of particle size, zeta potential, entrapment efficiency, loading capacity and in vitro UVA blocking effect. The efficiency of lipid nanoparticles in developing some cosmetic formulations has been evaluated by determining the in vitro erythemal UVA protection factor. In order to quantify the photoprotective effect, some selected cream formulations based on BMDBM-LNs and a conventional emulsion were exposed to photochemical UV irradiation at a low energy to simulate the solar energy during the midday. The results obtained demonstrated the high ability of cream formulations based on BMDBM-LNs to absorb more than 96% of UVA radiation. Moreover, the developed cosmetic formulations manifest an enhanced UVA blocking effect, the erythemal UVA protection factor being four times higher than those specific to conventional emulsions.

Scale-up of nanoemulsion produced by emulsification and solvent diffusion

The scale-up of nanoemulsions (NEs) produced by emulsification and solvent diffusion process was successfully achieved in the present work. Up to 1500 mL of NEs were produced with olive oil, castor oil, almond oil, or Arlamol™ E by using a Y-shaped mixer device. NE droplet sizes were significantly modulated from 290 to 185 nm by changing the process parameters without modification of the formulation composition. Smaller NE droplet sizes were obtained by (1) decreasing the internal diameter of the Y-mixer from 5 to 0.8 mm, (2) increasing the flow rates of the organic and the aqueous phases upon mixing, and (3) increasing the temperature of the experiment from 5°C to 40°C. All the results of NE diameters (d(sc) ) expressed as a function of the Reynolds number (Re) and the shear rate inside the Y-mixer (\documentclass{article}\usepackage{amssymb}\begin{document}\pagestyle{empty}$\dot \gamma$\end{document}) showed the existence of typical power-law relationships: d(sc) = 10(2.82) Re(- 0.14) and \documentclass{article}\usepackage{amssymb}\begin{document}\pagestyle{empty}$d_{{\rm sc}} = 10^{2.60} \dot \gamma ^{- 0.06}$\end{document}, respectively. The existence of these power-laws for NE formation by emulsification and solvent diffusion process has never been reported in the literature yet and constitutes a new finding in this work. We definitely proved that the high turbulences created upon NE formation are the most important parameter allowing to decrease droplet size.