Integration of microalgae cultivation with industrial waste remediation for biofuel and bioenergy production: opportunities and limitations

Utilizing CO2 in industrial off-gas for microalgae cultivation: considerations and solutions

The utilization of microalgae to treat carbon dioxide (CO2)-rich industrial off-gas has been suggested as both beneficial for emissions reduction and economically favorable for the production of microalgal products. Common sources of off-gases include coal combustion (2-15% CO2), cement production (8-15% CO2), coke production (18-23% CO2), and ore smelting (6-7% CO2). However, industrial off-gas also commonly contains other acid gas components [typically nitrogen oxides (NOX) and sulfur dioxide (SO2)] and metals that could inhibit microalgae growth and productivity. To utilize industrial off-gas effectively in microalgae cultivation systems, a number of solutions have been proposed to overcome potential inhibitions. These include bioprospecting to identify suitable strains, genetic modification to improve specific cellular characteristics, chemical additions, and bioreactor designs and operating procedures.In this review, results from microalgae experiments related to utilizing off-gas are presented, and the outcomes of different conditions discussed along with potential solutions to resolve limitations associated with the application of off-gas.

Microalgae are not an umbrella solution for power industry waste abatement but could play a role in their valorization

Microalgae have long been regarded as a promising solution for biological carbon abatement from the power industry, offering renewable biomass without competing for land or water resources used for food crops. In this study, we extensively examined the application of photosynthetic microorganisms for closing carbon, nitrogen, and micronutrient loops in the power industry. Subsequently, we explored the bottom-up integration of algal biorefineries into power industry waste streams for increased economic benefits and reduced environmental impacts. Analysis of the available data indicated that microalgae integration with the power industry is primarily performed using flue-gas-assisted cultivation. This approach allows for carbon sequestration typically below one gram per liter per day, too low to significantly impact carbon abatement at achievable scales of microalgae cultivation. Alternative approaches are also being explored. For example, soluble bicarbonate platforms allow for higher biomass productivity and temporary carbon storage. Meanwhile, the use of ashes and waste heat and thermophilic strains can result in lower cultivation costs and better control of cultivation conditions. These approaches offer further incremental improvement to microalgae-based carbon abatement systems in the power industry but are unlikely to be an umbrella solution for carbon reduction. Consequently, in the near term, microalgae-based carbon valorization systems are likely to be limited to niche applications involving the synthesis of high-value products. For microalgae to truly transform carbon abatement processes radical improvements in both biology and engineering approaches are urgently needed.

Utilization of microalgal-bacterial energy nexus improves CO2 sequestration and remediation of wastewater pollutants for beneficial environmental services

Carbon dioxide (CO2) emissions from the combustion of fossil fuels and coal are primary contributors of greenhouse gases leading to global climate change and warming. The toxicity of heavy metals and metalloids in the environment threatens ecological functionality, diversity and global human life. The ability of microalgae to thrive in harsh environments such as industrial wastewater, polluted lakes, and contaminated seawaters presents new, environmentally friendly, and less expensive CO2 remediation solutions. Numerous microalgal species grown in wastewater for industrial purposes may absorb and convert nitrogen, phosphorus, and organic matter into proteins, oil, and carbohydrates. In any multi-faceted micro-ecological system, the role of bacteria and their interactions with microalgae can be harnessed appropriately to enhance microalgae performance in either wastewater treatment or algal production systems. This algal-bacterial energy nexus review focuses on examining the processes used in the capture, storage, and biological fixation of CO2 by various microalgal species, as well as the optimized production of microalgae in open and closed cultivation systems. Microalgal production depends on different biotic and abiotic variables to ultimately deliver a high yield of microalgal biomass.

Effects of bubble cutting dynamic behaviors on microalgal growth in bubble column photobioreactor with a novel aeration device

Introduction: Carbon sequestration by microalgae is an effective approach for achieving carbon neutrality owing to its high carbon capture efficiency and environmental friendliness. To improve microalgae CO₂ fixation efficiency, various methods to enhance CO₂ transfer at the gas-liquid interface have resulted in high energy consumption. Methods: In this study, a novel aeration device with bubble cutting slices was installed in a photobioreactor for CO₂ supply, which could precisely separate bubbles into sizes on the way to rising after departure, achieving CO₂ transfer enhancement without extra energy consumption. Subsequently, the bubble cutting dynamic behaviors in the photobioreactor were studied, and the effects of thickness, hydrophilicity, and arrangement of cutting slices on microalgal growth were analyzed. Results: It was found that bubble cutting caused the maximum dry weight and biomass productivity of microalgae to improve by 6.99% and 33.33%, respectively, compared with those of the bioreactor without cutting units, owing to a 27.97% and 46.88% decrease in bubble size and rising velocity, respectively, and an 84.55% prolongation of bubble residence time. Discussion: Parallel cut slices with a thickness and spacing of less than 3 mm successfully cut the bubbles. The hydrophobic slice surface prevented daughter bubble departure and prolonged the bubble residence time, impeding microalgae growth owing to bubble coalescence with subsequent bubbles. The optimal cutting slice parameters and culture conditions for microalgal growth were 1 mm slice thickness, less than 1 mm slice spacing, 5% inlet CO₂ concentration, and 70 mL/min gas flow rate.

Regulatory mechanism of high-concentration CO2 on polysaccharide accumulation in Tetradesmus obliquus cultured in sludge extract

Microalgae such as Tetradesmus obliquus have great potential in immobilizing high-concentration CO₂ and removing highly toxic organic matters, which could be produced from coal chemical industry and coal chemical wastewater biological treatment process. In this study, Tetradesmus obliquus was cultured in sludge extract and high-concentration CO₂ was added. The maximum cell density and dry weight were respectively (111.46 ± 4.87) × 10⁶ cell/mL and 3.365 ± 0.168 g/L under 30% CO₂. Tetradesmus obliquus accumulated the most polysaccharides (629.60 ± 31.48 mg/L) on the 30th day under 30% CO₂. The results of proteomic showed that the upregulation of A0A2Z4THB7 and A0A383VAT1 promoted polysaccharide accumulation. Polysaccharide was mainly formed at the stable phase instead of the log-growth phase due to the abiotic stress caused by high TOC at the log-growth phase. Collectively, this study revealed the regulatory mechanism of high-concentration CO₂ on the toxicity removal and accumulation of polysaccharides in Tetradesmus obliquus.

Analysis of photosynthetic pigments pathway produced by CO2-toxicity-induced Scenedesmus obliquus

The coal-to-gas process produces carbon dioxide, which increases global warming, and its wastewater treatment generates sludge with high organic toxicity. Scenedesmus obliquus is a potential solution to such environmental problems, and photosynthetic pigments are the focus of this study. The optimal concentration of CO₂ for the growth of Scenedesmus obliquus was found to be 30 % after increasing the concentration of CO₂ (0.05 %-100 %). The accumulation of photosynthetic pigments during cultivation could reach 31.74 ± 1.33 mg/L, 11.21 ± 0.42 mg/L, and 5.59 ± 0.19 mg/L respectively, and the organic toxicity of sludge extract could be reduced by 44.97 %. Upregulation of A0A383VSL5, A0A383WMQ3, and A0A2Z4THB7 as photo systemic oxygen release proteins and propylene phosphate isomerase resulted in oxygen-evolving proteins in photosystem II, electron transport in photosystem I, and intermediates in carbon fixation. This is achieved by increasing the intracellular antennae protein and carbon fixation pathway, allowing Scenedesmus obliquus to both tolerate and fix CO₂ and reduce the organic toxicity of sludge. These findings provide insights into the innovative strategy underlining the fixation of CO₂, treatment and disposal of industrial residual sludge, and the enhancement of microalgal biomass production.

Effects of different concentrations of CO2 on Scenedesmus obliquus to overcome sludge extract toxicity and accumulate biomass

Large amounts of toxic excess sludge as well as high concentrations of carbon dioxide can be produced in coal-gasification industry. Microalgae has huge potential in the use of nutrients, the removal of toxic organic matter in excess sludge and CO₂ fixation. At the same time, the cultivation of the microalgae and the accumulation of high-quality biomass are also the key problems of concern. In this study, the growth and biomass synthesis of Scenedesmus obliquus cultured in sludge extract under 0%-15% (v/v) CO₂ were investigated. Results indicated that the highest microalgae biomass yield of 1.609 ± 0.012 g/L can be achieved under 15% CO₂ on the 30th day. The maximal photochemical efficiency of PSⅡ (Fv/Fm) decreased in the first 12 h and then increased with the culture time, and the decline amplitude decreased with the increase of the CO₂ concentration, indicating that CO₂ slowed down the toxic inhibition of sludge extract to Scenedesmus obliquus, which was expressed as the down-regulation of p53 signaling pathway and protein A0A383WFI7. Proteomic analysis showed that under high-concentration CO₂, the protein interaction network with the protein of photosystem II assembly (A0A383VSL5) as the core protein regulated the growth of Scenedesmus obliquus in terms of energy metabolism and material transportation. On the 4th day, Methyltransf_11 domain-containing protein (A0A383VH03) was up-regulated and promoted lipid synthesis, leading to the accumulation of lipids in Scenedesmus obliquus in the early stage and the increase of polysaccharides in the later stage. Collectively, this study revealed the regulation mechanism of CO₂ on toxicity removal and carbon distribution of Scenedesmus obliquus.

Phycoremediation of milk processing wastewater and lipid-rich biomass production using Chlorella vulgaris under continuous batch system

This study compiles the results of phycoremediation of milk processing wastewater (MPWW) and production of lipid-rich Chlorella vulgaris biomass using a continuous batch system operated for 12-wks. After a 4-wks interval, a new MPWW was loaded photobioreactor to provide appropriate nutrient supply to algae. Results indicated that MPWW supported the algal growth efficiently and the maximum algal growth was recorded in the ranges of 400.36 to 421.58 mg L^-1 during 4-wk's of the cultivation cycle. Average reduction in total nitrogen, TN (45.82-69.18%); nitrate, NO₃ (93.32-94.54%); total ammonium nitrogen, TAN (92.94-94.54%); sulphate, SO₄^-2 (85.13-87.34%); total phosphorus (75.09-78.78%); and biochemical oxygen demands, BOD (89.53-92.40%) was recorded during 12-wks phycoremediation of MPWW. Harvested algal biomass (dry weight basis, DW) exhibited a significant content of total sugar (45.5%) and total lipid (39.7%). The lipid profiling results indicated the presence of palmitic acid (39.9%), oleic acid (21.08%), linoleic acid (13.13%), and other C18 compounds in algal biomass, suggesting the suitability of MPWW for Chlorella vulgaris cultivations. Algal biomass exhibited a high heating value (MJ/Kg of DW) in the range of 17.3 to 25.1, comparable to other lignocellulose biomass to be used for bioenergy purposes. Results of this study indicate that MPWW could be utilized as a valuable medium for Chlorella vulgaris cultivation under a circular economy approach: wastewater treatment and bioenergy feedstock production. The effect of controlled environmental conditions on algal growth behavior and lipid composition in biomass, while using MPWW as a medium, could be investigated in future studies.

Integrated Approach for Carbon Sequestration and Wastewater Treatment Using Algal–Bacterial Consortia: Opportunities and Challenges

Increasing concentrations of carbon dioxide (CO2), one of the important greenhouse gases, due to combustion of fossil fuels, particularly burning coal, have become the major cause for global warming. As a consequence, many research programs on CO2 management (capture, storage, and sequestration) are being highlighted. Biological sequestration of CO2 by algae is gaining importance, as it makes use of the photosynthetic capability of these aquatic species to efficiently capture CO2 emitted from various industries and converting it into algal biomass as well as a wide range of metabolites such as polysaccharides, amino acids, fatty acids, pigments, and vitamins. In addition, their ability to thrive in rugged conditions such as seawater, contaminated lakes, and even in certain industrial wastewaters containing high organic and inorganic nutrients loads, has attracted the attention of researchers to integrate carbon capture and wastewater treatment. Algae offer a simple solution to tertiary treatments due to their nutrient removal efficiency, particularly inorganic nitrogen and phosphorus uptake. The algal–bacterial energy nexus is an important strategy capable of removing pollutants from wastewater in a synergistic manner. This review article highlights the mechanism involved in biological fixation of CO2 by microalgae, their cultivation systems, factors influencing algal cultivation in wastewater and CO2 uptake, the effect of co-cultivation of algae and bacteria in wastewater treatment systems, and challenges and opportunities.

Optimization of microwave-assisted carbohydrate extraction from indigenous Scenedesmus sp. grown in brewery effluent using response surface methodology

The use of wastewater as a nutrient source for microalgae cultivation is considered as a cost-effective approach for algal biomass and biofuel production. The microalgal biomass contains carbohydrates that can be processed into bioethanol through different extraction methods. The objective of this study is to optimize the microwave-assisted extraction (MAE) of carbohydrates from the indigenous Scenedesmus sp. grown on brewery effluent. Optimization of independent variables, such as acid concentration (0.1–5 N), microwave power (800–1200 W), temperature (80–180 °C) and extraction time (5–30 min) performed by response surface methodology. It was found that all independent variables had a significant and positive effect on microwave-assisted carbohydrate extraction. The quadratic model developed on the basis of carbohydrate yield had F value of 112.05 with P < 0.05, indicating that the model was significant to predict the carbohydrate yield. The model had a high value of R² (0.9899) and adjusted R² (0.9811), indicating that the fitted model displayed a good agreement between the predicted and actual carbohydrate yield. An optimum carbohydrate yield obtained was 260.54 mg g⁻¹ under the optimum conditions of acid concentration (2.8 N), microwave power (1075 W), temperature (151 °C) and extraction time (22 min). The validation test showed that the model has adequately described the microwave-assisted extraction (MAE) of carbohydrates from microalgal biomass. This study demonstrated that the indigenous Scenedesmus sp. grown on brewery effluent provides a promising result in carbohydrate production for bioethanol feedstock.

An eco-friendly strategy for dairy wastewater remediation with high lipid microalgae-bacterial biomass production

The present study attempts to integrate phyco-remediation and enhanced lipid productivity using microalgae-bacterial consortium enriched from wastewater fed aquaculture pond. Metagenomic analyses and microscopic images of the consortium revealed the presence of Chlorella variabilis, Parachlorella kessleri, Thermosynechococcus elongatus, Chlamydomonas, Phaeodactylum tricornutum, Oscillatoriales, Synechocystis sp., Microcystis aeruginosa, Nostocales, Naviculales, Stramenopiles, other members of Chlorophyceae, Trebouxiophyceae, and Chroococcales along with potential bacterial bioremediants. During a 30 days trial run (15 days stabilization and 14 days remediation studies) for phyco-remediation drastic reduction in the nutrient and COD content from the tested wastewater samples was seen. There was up to 93% and 87.2% reduction in chemical oxygen demand (COD) and ammonium concentration, respectively. Further, almost 100% removal of nitrates and phosphates from the dairy wastewater upon 48 h of treatment with polyculture under ambient temperature (25 ± 2 °C) with 6309 lux illumination and mild aeration, was observed for all the seven cycles. Interestingly, the nutrient and COD concentrations in the treated water were below the discharge standards as per Central Pollution Control Board (CPCB) norms. In additions, biomass (reported as dry cell weight) was enhanced by 67% upon treatment with ammonia-rich dairy wastewater exhibiting 42% lipid, 55% carbohydrate, and 18.6% protein content enhancement. The polyculture mainly grown as attached biofilm to the surface, offered an easy harvesting and separation of grown biomass from the treated wastewater. Overall, dairy wastewater was found to be a potential nutrient source for microalgae-bacteria cultivation thereby making the treatment process sustainable and eco-friendly.

Review on integrated biofuel production from microalgal biomass through the outset of transesterification route: a cascade approach for sustainable bioenergy

In recent years, microalgal feedstocks have gained immense potential for sustainable biofuel production. Thermochemical, biochemical conversions and transesterification processes are employed for biofuel production. Especially, the transesterification process of lipid molecules to fatty acid alkyl esters (FAAE) is being widely employed for biodiesel production. In the case of the extractive transesterification process, biodiesel is produced from the extracted microalgal oil. Whereas In-situ (reactive) transesterification allows the direct conversion of microalgae to biodiesel avoiding the sequential steps, which subsequently reduces the production cost. Though microalgae have the highest potential to be an alternate renewable feedstock, the minimization of biofuel production cost is still a challenge. The biorefinery approaches that rely on simple cascade processes involving cost-effective technologies are the need of an hour for sustainable bioenergy production using microalgae. At the same time, combining the biorefineries for both (i) high value-low volume (food and health supplements) and (ii) low value- high volume (waste remediation, bioenergy) from microalgae involves regulatory and technical problems. Waste-remediation and algal biorefinery were extensively reviewed in many previous reports. On the other hand, this review focuses on the cascade processes for efficient utilization of microalgae for integrated bioenergy production through the transesterification. Microalgal biomass remnants after the transesterification process, comprising carbohydrates as a major component (process flow A) or the carbohydrate fraction after bio-separation of pretreated microalgae (process flow B) can be utilized for bioethanol production. Therefore, this review concentrates on the cascade flow of integrated bioprocessing methods for biodiesel and bioethanol production through the transesterification and biochemical routes. The review also sheds light on the recent combinatorial approaches of transesterification of microalgae. The applicability of spent microalgal biomass residue for biogas and other applications to bring about zero-waste residue are discussed. Furthermore, techno-economic analysis (TEA), life cycle assessment (LCA) and challenges of microalgal biorefineries are discussed.

Screening of two freshwater green microalgae in pulp and paper mill wastewater effluents in Nova Scotia, Canada

In recent years, the use of microalgae as feedstock for many marketable products, such as animal/aqua feeds, bioplastics and fertilizers, has gained renewed interest due to their fast growth potential coupled with relatively high lipid, carbohydrate and nutrient content. An algal biorefinery at an industrial site has the potential to sustainably and profitably convert carbon dioxide emissions into microalgal biomass and concomitantly reduce nitrogen and phosphorus from wastewaters. Industrial wastewaters are a potential alternative to traditional media used for large-scale microalgal cultivation. Pulp and paper mills are major consumers of water resources and discharge a huge amount of water to nearby lakes or rivers. This study investigated whether pulp and paper mill waste water is suitable for microalgal cultivation with the aim of achieving significant biomass production. Six different process waters from one Canadian pulp and paper mill were tested with two freshwater green microalgae. All of these waters were unable to support growth of microalgae due to inadequate nutrient concentrations, colour, turbidity and possible toxicity issues.

Recent advancements in mixotrophic bioprocessing for production of high value microalgal products

Recently, microalgal biomass has become an attractive and sustainable feedstock for renewable production of various biochemicals and biofuels. However, attaining required productivity remains a key challenge to develop industrial applications. Fortunately, mixotrophic cultivation strategy (MCS) is leading to higher productivity due to the metabolic ability of some microalgal strain to utilise both photosynthesis and organic carbon compared to phototrophic or heterotrophic processes. The potential of MCS is being explored by researchers for maximized biochemicals and biofuels production however it requires further development yet to reach commercialization stage. In this review, recent developments in the MCS bioprocess for selective value-added (carotenoids) products have been reviewed; synergistic mechanism of carbon and energy was conferred. Moreover, the metabolic regulation of microalgae under MCS for utilized carbon forms and carbon recycling was demonstrated; Additionally, the opportunities and challenges of large-scale MCS have been discussed.

Phycoremediation coupled biomethane production employing sewage wastewater: Energy balance and feasibility analysis

In the present work Chlorella pyrenoidosa, Scenedesmus abundans and Anabaena ambigua have been evaluated for their biomass, phycoremediation efficiency and biomethane production potential by cultivating them in the primary treated sewage waste water (PTSWW) under controlled conditions. By the end of 25-day experiment, up to 52-88% reduction was observed in the nutrient concentration from the 3:1 ratio of PTSWW. Co-digestion of microalgal biomass (dry) with cow dung was performed to estimate biomethane potential. Biogas yield of 618-925 ml g^-1 VS with 48-65% of methane content was obtained employing the microalgal species cultivated in PTSWW. Microalgae appeared notably competent at nutrient sequestration from PTSWW with significant microalgal biomass productivity for biogas production. Energy balance studies revealed the feasibility of coupling the remediation with energy generation. High photosynthetic rate and biomass generation ability along with nutrient confiscation supports employment of microalgae as a potential next generation biofuel source with waste management.

Wealth from waste: Diatoms as tools for phycoremediation of wastewater and for obtaining value from the biomass

Diatoms are a type of microalgae with diverse capabilities which make them useful for multiple applications. The abundance of diatoms in water bodies facilitates the removal of pollutants from wastewater originating from different industries, such as agriculture and other anthropogenic sources. The unique photosynthetic, cellular and metabolic characteristics of diatoms allows them to utilize pollutants like nitrate, iron, phosphate, molybdenum, silica, and heavy metals, such as copper, cadmium, chromium, lead, etc., which make diatoms a good option for wastewater treatment. In addition, the biomass produced by diatoms growth on wastewaters has diverse applications and can, therefore, be valuable. This review focusses on the unique capabilities of diatoms for wastewater remediation and the capture of carbon dioxide, concomitant with the generation of valuable products. Diatom biorefinery can be a sustainable solution to wastewater management, and the biomass obtained from treatment can be turned into biofuels, biofertilizers, nutritional supplements for animal production, and used for pharmaceutical applications containing bioactive compounds like EPA, DHA and pigments such as fucoxanthin.

Modification and improvement of microalgae strains for strengthening CO2 fixation from coal-fired flue gas in power plants

Biological CO₂ capture using microalgae is a promising new method for reducing CO₂ emission of coal-fired flue gas. The strain of microalgae used in this process plays a vital role in determining the rate of CO₂ fixation and characteristics of biomass production. High requirements are put forward for algae strains due to high CO₂ concentration and diverse pollutants in flue gas. CO₂ can directly diffuse into the cytoplasm of cells by extra- and intracellular CO₂ osmotic pressure under high CO₂ concentrations. The flue gas pollutants, such as SO_x, NO_x and fly ashes, have negative effects on the growth of microalgae. This work reviewed the state-of-the-art advances on microalgae strains used for CO₂ fixation, focusing on the modification and improvement of strains that are used for coal-fired flue gas. Methods such as genetic engineering, random mutagenesis, and adaptive evolution have the potential to facilitate photosynthesis, improve growth rate and reduce CO₂ emission.

Cyanobacterial Growth in Minimally Amended Anaerobic Digestion Effluent and Flue-Gas

Anaerobic digestion (AD) is an important industrial process, particularly in a biorefinery approach. The liquid effluent and carbon dioxide in the off-gas, can be used to produce high-value products through the cultivation of cyanobacteria. Growth on AD effluent is often limited due to substrate limitation or inhibitory compounds. This study demonstrates the successful cultivation of Synechococcus on minimally amended AD effluent, supplemented with MgSO₄ and diluted with seawater. An 8 L airlift reactor illustrated growth in a pilot scale setup. Higher biomass yields were observed for cyanobacteria grown in diluted AD effluent compared to minimal medium, with 60% total nitrogen removal in the effluent. It was demonstrated that controlling the pH, increasing dissolved salt concentrations and adding MgSO₄ to the effluent allowed for the successful cultivation of the cyanobacterium, circumventing the addition of clean water for effluent dilution. This could ultimately increase the feasibility of anaerobic digestion-microalgae integrated biorefineries.

Integration of Green Energy and Advanced Energy-Efficient Technologies for Municipal Wastewater Treatment Plants

Wastewater treatment can consume a large amount of energy to meet discharge standards. However, wastewater also contains resources which could be recovered for secondary uses under proper treatment. Hence, the goal of this paper is to review the available green energy and biomass energy that can be utilized in wastewater treatment plants. Comprehensive elucidation of energy-efficient technologies for wastewater treatment plants are revealed. For these energy-efficient technologies, this review provides an introduction and current application status of these technologies as well as key performance indicators for the integration of green energy and energy-efficient technologies. There are several assessment perspectives summarized in the evaluation of the integration of green energy and energy-efficient technologies in wastewater treatment plants. To overcome the challenges in wastewater treatment plants, the Internet of Things (IoT) and green chemistry technologies for the water and energy nexus are proposed. The findings of this review are highly beneficial for the development of green energy and energy-efficient wastewater treatment plants. Future research should investigate the integration of green infrastructure and ecologically advanced treatment technologies to explore the potential benefits and advantages.

Approaches and processes for ammonia removal from side-streams of municipal effluent treatment plants

The main objective of this review article is to provide a comprehensive view on various conventional and emerging side-stream ammonia removal treatment options for municipal wastewater treatment plants (WWTPs). Optimization of wastewater treatment facilities from an energy and emissions stand-point necessitates consideration of the impact of the various internal side-streams. Side-streams from anaerobic sludge digesters in particular have the potential to be a significant ammonium load to the mainstream treatment process. However, the literature suggests that managing side-streams through their treatment in the mainstream process is not the most energy efficient approach, nor does it allow for practical recovery of nutrients. Furthermore, as effluent criteria become more stringent in some jurisdictions and sludge hydrolysis pre-treatment for digesters more common, an understanding of treatment options for ammonia in digester supernatant becomes more important. Given these considerations, a variety of side-stream treatment processes described in the literature are reviewed.

Cultivation of an algae-bacteria consortium in wastewater from an industrial park: Effect of environmental stress and nutrient deficiency on lipid production

Adoption of microalgae-sourced products depends on the economic feasibility. In the case of fatty acids, it is crucial to obtain high lipid yield, especially in the form of storage lipids (TAGs). However, the production of these lipids often comes into competition with the microalgae biomass, resulting in a decrease in growth. A microalgae culture integration project was conducted in an industrial park in Canada in order to cultivate microalgae from park's wastewaters and then obtain products from the biomass. Different deficiencies and stresses were tested to evaluate what condition allowed the induction of the highest lipids accumulation without compromising the growth of microalgae. The results showed that the medium controlled to pH 7.0 allowed reaching the largest amount of extracted lipids (28 ± 4.3%). Companies involved in this project could be able to make significant savings by the reduced wastewater treatment costs and by not adding expensive nutrients in culture.

In situ biological CO2 fixation and wastewater nutrient removal with Neochloris oleoabundans in batch photobioreactor

Microalgae cultivation in wastewater media in phototrophic condition is a promising approach for integrated CO₂ biofixation and wastewater treatment. For this, Neochloris oleoabundans was used to investigate the tertiary treatment of wastewater along with CO₂ biofixation. In this investigation, biomass productivity, CO₂ biofixation rate and percentage of total nitrogen (TN) and total phosphorus (TP) removal from synthetic wastewater are considered under three different operating conditions: temperature, CO₂ feed concentration and nitrogen to phosphorus (NP) ratio in the media. Cultivation of N. oleoabundans was found to be highly temperature sensitive. With the increase of cultivation temperature from 25 to 45 °C, declining trends of biomass concentration, productivity and percentage of TN and TP removal were observed. Cultivation temperature of 25 °C was found to be most favorable in terms of biomass productivity, CO₂ biofixation rate, percentage of TN and TP removal of 92 (mg L^-1 day^-1), 145 (mg L^-1 day^-1), 100% and 32%, respectively. Arrhenius-type kinetic model was used and the model showed good agreement with the experimental findings. Activation energy for the active stage and decay stage was found to be [Formula: see text] = 88.8 kJ mol^-1 and [Formula: see text] = 8.4 kJ mol^-1, respectively. With the increase of CO₂ feed concentration, biomass productivity increased and the maximum biomass concentration and productivity was achieved at 6%. After that with the increase in CO₂, a declining trend was observed. With the increase of NP ratio from 1:1 to 2:1, both the biomass productivity and CO₂ biofixation were increased, but later were subsequently decreased with increase of NP ratio from 4:1 to 8:1. It is interesting that TP removal was increased with NP ratio and 100 percent of TP removal was achieved at 4:1 and 8:1 conditions.

Evaluation of Pre-Chlorinated Wastewater Effluent for Microalgal Cultivation and Biodiesel Production

Microalgae are promising feedstock to produce biodiesel and other value added products. However, the water footprint for producing microalgal biodiesel is enormous and would put a strain on the water resources of water stressed countries like South Africa if freshwater is used without recycling. This study evaluates the utilization of pre-chlorinated wastewater as a cheap growth media for microalgal biomass propagation with the aim of producing biodiesel whilst simultaneously remediating the wastewater. Wastewater was collected from two wastewater treatment plants (WWTPs) in Durban, inoculated with Neochloris aquatica and Asterarcys quadricellulare and the growth kinetics monitored for a period of 8 days. The physicochemical parameters; including chemical oxygen demand (COD), total nitrogen (TN), and total phosphorus (TP) were determined before microalgal cultivation and after harvesting. Total lipids were quantified gravimetrically after extraction by hexane/isopropanol (3:2 v/v). Biodiesel was produced by transesterification and characterised by gas chromatography. The total carbohydrate was extracted by acid hydrolysis and quantified by spectrophotometric method based on aldehyde functional group derivatization. Asterarcys quadricellulare utilized the wastewater for growth and reduced the COD of the wastewater effluent from the Umbilo WWTP by 12.4%. Total nitrogen (TN) and phosphorus (TP) were reduced by 48% and 50% respectively by Asterarcys quadricellulare cultivated in sterile wastewater while, Neochloris reduced the TP by 37% and TN by 29%. Although the highest biomass yield (460 mg dry weight) was obtained for Asterarcys, the highest amount of lipid (14.85 ± 1.63 mg L−1) and carbohydrate (14.84 ± 0.1 mg L−1) content were recorded in Neochloris aquatica. The dominant fatty acids in the microalgae were palmitic acid (C16:0), stearic acid (C18:0) and oleic acid (C18:1). The biodiesel produced was determined to be of good quality with high oxidation stability and low viscosity, and conformed to the American society for testing and materials (ASTM) guidelines.

Nutrient removal and biomass production: advances in microalgal biotechnology for wastewater treatment

Owing to certain drawbacks, such as energy-intensive operations in conventional modes of wastewater treatment (WWT), there has been an extensive search for alternative strategies in treatment technology. Biological modes for treating wastewaters are one of the finest technologies in terms of economy and efficiency. An integrated biological approach with chemical flocculation is being conventionally practiced in several-sewage and effluent treatment plants around the world. Overwhelming responsiveness to treat wastewaters especially by using microalgae is due to their simplest photosynthetic mechanism and ease of acclimation to various habitats. Microalgal technology, also known as phycoremediation, has been in use for WWT since 1950s. Various strategies for the cultivation of microalgae in WWT systems are evolving faster. However, the availability of innovative approaches for maximizing the treatment efficiency, coupled with biomass productivity, remains the major bottleneck for commercialization of microalgal technology. Investment costs and invasive parameters also delimit the use of microalgae in WWT. This review critically discusses the merits and demerits of microalgal cultivation strategies recently developed for maximum pollutant removal as well as biomass productivity. Also, the potential of algal biofilm technology in pollutant removal, and harvesting the microalgal biomass using different techniques have been highlighted. Finally, an economic assessment of the currently available methods has been made to validate microalgal cultivation in wastewater at the commercial level.

Impact of Flue Gas Compounds on Microalgae and Mechanisms for Carbon Assimilation and Utilization

To shift the world to a more sustainable future, it is necessary to phase out the use of fossil fuels and focus on the development of low-carbon alternatives. However, this transition has been slow, so there is still a large dependence on fossil-derived power, and therefore, carbon dioxide is released continuously. Owing to the potential for assimilating and utilizing carbon dioxide to generate carbon-neutral products, such as biodiesel, the application of microalgae technology to capture CO₂ from flue gases has gained significant attention over the past decade. Microalgae offer a more sustainable source of biomass, which can be converted into energy, over conventional fuel crops because they grow more quickly and do not adversely affect the food supply. This review focuses on the technical feasibility of combined carbon fixation and microalgae cultivation for carbon reuse. A range of different carbon metabolisms and the impact of flue gas compounds on microalgae are appraised. Fixation of flue gas carbon dioxide is dependent on the selected microalgae strain and on flue gas compounds/concentrations. Additionally, current pilot-scale demonstrations of microalgae technology for carbon dioxide capture are assessed and its future prospects are discussed. Practical implementation of this technology at an industrial scale still requires significant research, which necessitates multidisciplinary research and development to demonstrate its viability for carbon dioxide capture from flue gases at the commercial level.

Assessment of Chlorella vulgaris and indigenous microalgae biomass with treated wastewater as growth culture medium

The aim of the present work was to evaluate the feasibility of microalgae cultivation using secondary treated domestic wastewater. Two Chlorella vulgaris strains (CICESE and UTEX) and an indigenous consortium, were cultivated on treated wastewater enriched with and without the fertilizer Bayfolan®. Biomass production for C. vulgaris UTEX, CICESE and the indigenous consortium grown in treated wastewater was 1.167±0.057, 1.575±0.434 and 1.125±0.250g/L, with a total lipid content of 25.70±1.24, 23.35±3.01and 20.54±1.23% dw, respectively. The fatty acids profiles were mainly composed of C16 and C18. Regardless of the media used, in all three strains unsaturated fatty acids were the main FAME (fatty acids methyl esters) accumulated in a range of 45-62%. An enrichment of treated wastewater with Bayfolan® significantly increased the production of biomass along with an increase in pigments and proteins of ten and threefold, respectively.

Selection and adaptation of microalgae to growth in 100% unfiltered coal-fired flue gas

Microalgae have been considered for biological carbon capture and sequestration to offset carbon emissions from fossil fuel combustion. This study shows that mixed biodiverse microalgal communities can be selected for and adapted to tolerate growth in 100% flue gas from an unfiltered coal-fired power plant that contained 11% CO₂. The high SOx and NOx emissions required slow adaptation of microalgae over many months, with step-wise increases from 10% to 100% flue gas supplementation and phosphate buffering at higher concentrations. After a rapid decline in biodiversity over the first few months, community profiling revealed Desmodesmus spp. as the dominant microalgae. To the authors' knowledge this work is the first to demonstrate that up 100% unfiltered flue gas from coal-fired power generation can be used for algae cultivation. Implementation of serial passages over a range of photobioreactors may contribute towards the development of microalgal-mediated carbon capture and sequestration processes.

Rescuing ethanol photosynthetic production of cyanobacteria in non-sterilized outdoor cultivations with a bicarbonate-based pH-rising strategy

BACKGROUND

Ethanol photosynthetic production based on cyanobacteria cell factories utilizing CO₂ and solar energy provides an attractive solution for sustainable production of green fuels. However, the scaling up processes of cyanobacteria cell factories were usually threatened or even devastated by biocontaminations, which restricted biomass or products accumulations of cyanobacteria cells. Thus it is of great significance to develop reliable biocontamination-controlling strategies for promoting ethanol photosynthetic production in large scales.

RESULTS

The scaling up process of a previously developed Synechocystis strain Syn-HZ24 for ethanol synthesis was severely inhibited and devastated by a specific contaminant, Pannonibacter phragmitetus, which overcame the growths of cyanobacteria cells and completely consumed the ethanol accumulation in the cultivation systems. Physiological analysis revealed that growths and ethanol-consuming activities of the contaminant were sensitive to alkaline conditions, while ethanol-synthesizing cyanobacteria strain Syn-HZ24 could tolerate alkaline pH conditions as high as 11.0, indicating that pH-increasing strategy might be a feasible approach for rescuing ethanol photosynthetic production in outdoor cultivation systems. Thus, we designed and evaluated a Bicarbonate-based Integrated Carbon Capture System (BICCS) derived pH-rising strategy to rescue the ethanol photosynthetic production in non-sterilized conditions. In lab scale artificially simulated systems, pH values of BG11 culture medium were maintained around 11.0 by 180 mM NaHCO₃ and air steam, under which the infection of Pannonibacter phragmitetus was significantly restricted, recovering ethanol production of Syn-HZ24 by about 80%. As for outdoor cultivations, ethanol photosynthetic production of Syn-HZ24 was also successfully rescued by the BICCS-derived pH-rising strategy, obtaining a final ethanol concentration of 0.9 g/L after 10 days cultivation.

CONCLUSIONS

In this work, a novel product-consuming biocontamination pattern in cyanobacteria cultivations, causing devastated ethanol photosynthetic production, was identified and characterized. Physiological analysis of the essential ethanol-consuming contaminant directed the design and application of a pH-rising strategy, which effectively and selectively controlled the contamination and rescued ethanol photosynthetic production. Our work demonstrated the importance of reliable contamination control systems and strategies for large scale outdoor cultivations of cyanobacteria, and provided an inspiring paradigm for targeting effective solutions.

Industrial Integration: A Literature Review

Industrial integration becomes more and more attractive to practitioners in industry, and draws a lot of attention from academia as well. However, the discussion of industrial integration is inconsistent, diversified, and targeted at different prospects. This paper attempts to address a systematic and comprehensive review on 74 articles about industrial integration from 2006 to 2016 in the SCI/SSCI database, in order to present an overview to researchers and practitioners. We will clarify current trends and main findings, and framework, strategies, and case analyses as well. The selected papers are diversified into seven research potential outlets. Summarization and research directions for each outlet are examined. Depending on the selected articles, European countries are the major contributed countries focusing on practical or technological issues regarding industrial integration.

Maximizing the productivity of the microalgae Scenedesmus AMDD cultivated in a continuous photobioreactor using an online flow rate control

In this study, production of the microalga Scenedesmus AMDD in a 300 L continuous flow photobioreactor was maximized using an online flow (dilution rate) control algorithm. To enable online control, biomass concentration was estimated in real time by measuring chlorophyll-related culture fluorescence. A simple microalgae growth model was developed and used to solve the optimization problem aimed at maximizing the photobioreactor productivity. When optimally controlled, Scenedesmus AMDD culture demonstrated an average volumetric biomass productivity of 0.11 g L^-1 d^-1 over a 25 day cultivation period, equivalent to a 70 % performance improvement compared to the same photobioreactor operated as a turbidostat. The proposed approach for optimizing photobioreactor flow can be adapted to a broad range of microalgae cultivation systems.

Recycling of lipid-extracted hydrolysate as nitrogen supplementation for production of thraustochytrid biomass

Efficient resource usage is important for cost-effective microalgae production, where the incorporation of waste streams and recycled water into the process has great potential. This study builds upon emerging research on nutrient recycling in thraustochytrid production, where waste streams are recovered after lipid extraction and recycled into future cultures. This research investigates the nitrogen flux of recycled hydrolysate derived from enzymatic lipid extraction of thraustochytrid biomass. Results indicated the proteinaceous content of the recycled hydrolysate can offset the need to supply fresh nitrogen in a secondary culture, without detrimental impact upon the produced biomass. The treatment employing the recycled hydrolysate with no nitrogen addition accumulated 14.86 g L(-1) of biomass in 141 h with 43.3 % (w/w) lipid content compared to the control which had 9.26 g L(-1) and 46.9 % (w/w), respectively. This improved nutrient efficiency and wastewater recovery represents considerable potential for enhanced resource efficiency of commercial thraustochytrid production.