Design of 2D–2D NiO/g-C3N4 heterojunction photocatalysts for degradation of an emerging pollutant

Preparation of ultra-sensitive and selective hydrogen peroxide-based colorimetric sensor using highly exfoliated g-C3N4 nanosheets with peroxidase-like activity

A highly sensitive, portable, rapid, and accurate colorimetric sensing method is presented. It is based upon exfoliated g-C3N4 nanosheets (E-g-C3N4 NSs), having peroxidase nanozyme-like properties. The as-prepared catalyst (E-g-C3N4 NSs) tends to oxidize the colorless tetramethyl-benzidine (TMB) into oxidized-TMB in the presence of hydrogen peroxide (H2O2) generating a dark blue color and corresponding ultraviolet visible-spectral changes following a Michaelis-Menten kinetic. The prepared colorimetric sensor exhibited response within the range 0.001-0.450 μM having R2 value of 0.999 and a detective limit (LOD) of 0.15 ± 0.04 nM. Furthermore, the sensor also displayed outstanding selectivity, ample stability (10 weeks), and excellent practicability in real sample applications. All these outstanding properties were highly attributed to the large surface area with exposed actives sites, high surface energy, and large conductive structure of E-g-C3N4 NSs. For comparison of the catalytic study, we have also explored the sensing mechanism of B-g-C3N4, using the same optimized experimental conditions. Resultantly, we concluded that the proposed sensor (E-g-C3N4 NSs) will gain considerable attention for on-site environmental and health monitoring in future endeavor.

Graphitic Carbon Nitride Structures on Carbon Cloth Containing Ultra- and Nano-Dispersed NiO for Photoactivated Oxygen Evolution

The development of low-cost and high-efficiency oxygen evolution reaction (OER) photoelectrocatalysts is a key requirement for H2 generation via solar-assisted water splitting. In this study, we report on an amenable fabrication route to carbon cloth-supported graphitic carbon nitride (gCN) nanoarchitectures, featuring a modular dispersion of NiO as co-catalyst. The synergistic interaction between gCN and NiO, along with the tailoring of their size and spatial distribution, yield very attractive OER performances and durability in freshwater splitting, of great significance for practical end-uses. The potential of gCN electrocatalysts containing ultra-dispersed, i. e. "quasi-atomic" NiO, exhibiting a higher activity than the ones containing nickel oxide nanoaggregates, is further highlighted by their activity even in real seawater. This work suggests that efficient OER catalysts can be designed through the construction of optimized interfaces between transition metal oxides and carbon nitride, yielding inexpensive and promising noble metal-free systems for real-world applications.

Photodegrading rhodamine B dye with cobalt ferrite-graphitic carbon nitride (CoFe2O4/g-C3N4) composite

The present research utilizes a sol-gel approach to create a CoFe2O4/g-C3N4 nanocomposite (NC) and explored several analytical methods to evaluate physical, chemical and optical based characteristics via XRD, FTIR, UV-vis, SEM/EDS and XPS for the prepared pure CoFe2O4, g-C3N4, and CoFe2O4/g-C3N4 NC. The XRD results show that the prepared g-C3N4, CoFe2O4, exhibits hexagonal and cubic phases respectively, whereas the g-C3N4/CoFe2O4 NC exhibit mixing of two phases. The energy band gaps for pure g-C3N4, CoFe2O4 and g-C3N4/CoFe2O4 NC values are viz., 2.75, 1.3, and 2.4 eV. As photocatalysts, synthesized materials were utilized for the decomposition of Rhodamine-B (RhB) dye. Finally, the CoFe2O4/g-C3N4 NC showed good performance of photocatalysis for RhB dye disintegration under the stimulus of visible light. According to the induced visible light, the rate at which the photocatalytic degradation occurs for the CoFe2O4/g-C3N4 NC was found to be 57% in 120 min and this is greater when compared with pure catalysts like CoFe2O4 (28%) and g-C3N4 (10%). These outcomes suggest that the prepared NC have efficiently worked during the photocatalytic process compared with its pure materials.

Harnessing ZnCr2O4/g-C3N4 nanosheet heterojunction for enhanced photocatalytic degradation of rhodamine B and ciprofloxacin

Utilizing semiconductors for photocatalytic processes in water bodies as an approach to environmental remediation has gained considerable attention. Theoretical band position calculations revealed a type-II step-scheme charge flow mechanism for ZnCr2O4/g-C3N4 (ZCr/gCN), emphasizing effective heterojunction formation due to synergies between the materials. A composite of agglomerated nanoparticle ZnCr2O4 (Zinc chromium oxide - ZCr)/g-C3N4 (graphitic carbon nitride - gCN) nanosheets was synthesized using the ultrasonication and leveraging the heterojunction to enhance degradation efficiency and active sites participation. The synthesized sample was characterized by XRD, XPS, FTIR, BET, HRSEM, EDX, HRTEM, EIS PL, and UV-visible spectroscopy. XRD analysis confirmed the successful formation of pure ZnCr2O4, g-C3N4 (gCN), and their composite without any secondary phases. Optical investigations demonstrated a red shift (444-470 nm) in UV-visible spectra as ZnCr2O4 content increased. Morphological assessment via HRSEM unveiled agglomerated nanoparticle and nanosheet structures. FTIR analysis indicated the presence of gCN with the tri-s-triazine breathing mode at 807 cm-1, and the identification of octahedral Zn-O (598.11 cm-1) and tetrahedral Cr-O (447.01 cm-1) metal bonds within the spinel structure of ZnCr2O4. A Surface area of 134.162 m2/g was noticed with a microporous structure of pore radius 1.484 nm. Notably, the 15% ZCr/gCN composite achieved a remarkable 93.94 % (Rhodamine B-RhB) and 74.36 % (Ciprofloxacin - CIP) within 100 and 120 min, surpassing the performance of pure gCN. Improved degradation was attributed to higher charge separation (photo-excited electrons and holes), reducing charge recombination, as supported by photoluminescence and photoelectrochemical analyses. The presence of active species like superoxide during degradation was confirmed through a scavenger test. The stability analysis confirms the sample's stable nature (without secondary phase formation) after degradation. This work underscores the potential of ZnCr2O4 based metal-free compounds intended for effective environmental remediation.

Electrospun PAN/PEG Nanofibrous Membrane Embedded with a MgO/gC3N4 Nanocomposite for Effective Bone Regeneration

Developing biomaterial scaffolds using tissue engineering with physical and chemical surface modification processes can improve the bioactivity and biocompatibility of the materials. The appropriate substrate and site for cell attachment are crucial in cell behavior and biological activities. Therefore, the study aims to develop a conventional electrospun nanofibrous biomaterial using reproducible surface topography, which offers beneficial effects on the cell activities of bone cells. The bioactive MgO/gC3N4 was incorporated on PAN/PEG and fabricated into a nanofibrous membrane using electrospinning. The nanocomposite uniformly distributed on the PAN/PEG nanofiber helps to increase the number of induced pores and reduce the hydrophobicity of PAN. The physiochemical characterization of prepared nanoparticles and nanofibers was carried out using FTIR, X-ray diffraction (XRD), thermogravimetry analysis (TGA), X-ray photoelectron spectroscopy (XPS), and water contact angle measurements. SEM and TEM analyses examined the nanofibrous morphology and the structure of MgO/gC3N4. In vitro studies such as on ALP activity demonstrated the membrane's ability to regenerate new bone and healing capacity. Furthermore, alizarin red staining showed the increasing ability of the cell-cell interaction and calcium content for tissue regeneration. The cytotoxicity of the prepared membrane was about 97.09% of live THP-1 cells on the surface of the MgO/gC3N4@PAN/PEG membrane evaluated using MTT dye staining. The soil burial degradation analysis exhibited that the maximum degradation occurs on the 45th day because of microbial activity. In vitro PBS degradation was observed on the 15th day after the bulk hydrolysis mechanism. Hence, on the basis of the study outcomes, we affirm that the MgO/gC3N4@PAN/PEG nanofibrous membrane can act as a potential bone regenerative substrate.

Photodegradation of rhodamine-B in aqueous environment using visible-active gC3N4@CS-MoS2 nanocomposite

Rapid industrial expansion leads to environmental pollution especially in an aqueous environment. Photocatalytic degradation is one of the most efficient and environmentally friendly techniques used to treat industrial pollution due to its complete degradation capability of a variety of water contaminants to their non-toxic state. Graphitic carbon nitride (gC3N4) and molybdenum disulfide (MoS2) provide efficient dye degradation, but MoS2 has few disadvantages. Hence, chitosan (CS) supported gC3N4-MoS2 hybrid nanocomposite was developed in this study to reduce these issues by accelerating the degradation of dye molecules such as rhodamine-B under visible light. The prepared gC3N4@CS-MoS2 hybrid nanocomposite was thoroughly characterized using various analytical tools including FTIR, XRD, SEM, EDX, XPS, UV-Visible, and PL spectra. Several influencing parameters such as irradiation time, initial pH, dosage, and initial dye concentration were optimized by batch mode. The photodegradation of rhodamine-B could be induced by the heterogeneous gC3N4@CS-MoS2-water hybrid nanocomposite. The narrow band gap of gC3N4@CS-MoS2 (1.80 eV) makes it suitable for effective degradation of rhodamine-B due to more active in the visible region and attained its highest degradation efficiency of 99% after 40 min at pH 8 with minimum dosage of 60 mg. The possible degradation mechanism was tentatively proposed for rhodamine-B dye molecules from aqueous environment. The present work shows a novel photocatalyst for the purification and detoxification of dye molecules as well as other water contaminants found in polluted wastewater.

Copper indium sulfide quantum dots in photocatalysis

Since the advent of photocatalytic technology, scientists have been searching for semiconductor materials with high efficiency in solar energy utilization and conversion to chemical energy. Recently, the development of quantum dot (QD) photocatalysts has attracted much attention because of their unique characteristics: small size, quantum effects, strong surface activity, and wide photoresponse range. Among ternary chalcogenide semiconductors, CuInS₂ QDs are increasingly examined in the field of photocatalysis due to their high absorption coefficients, good matching of the absorption range with sunlight spectrum, long lifetimes of photogenerated electron-hole pairs and environmental sustainability. In this review paper, the structural and electronic properties, synthesis methods and various photocatalytic applications of CuInS₂ QDs are systematically expounded. The current research status on the photocatalytic properties of materials based on CuInS₂ QD is discussed combined with the existing modification approaches for the enhancement of their performances. Future challenges and new development opportunities of CuInS₂ QDs in the field of photocatalysis are then prospected.

Z-scheme NiO/g-C3N4 nanocomposites prepared using phyto-mediated nickel nanoparticles for the efficient photocatalytic degradation

Highly-effective photocatalyst of NiO/g-C₃N₄ with was successfully synthesized by using phyto-mediated-synthesized nickel nanoparticles. The preparation was initiated by synthesizing nickel nanoparticles by using Tinosphora cordifolia stem extract under ultrasound-assisted method followed by the dispersing onto g-C₃N₄ structure. The study focused on physicochemical characterization and photocatalytic activity as function of the percentage of Ni in the nanocomposite. The photocatalytic activity examinations were carried out to rhodamine B and tetracycline photocatalytic oxidation. The results demonstrated that graphitic carbon nitride is effectively improved the photocatalytic activity of NiO for both photocatalytic oxidation reactions. From the varied Ni content of 5; 10; and 20 %wt., it was also found that the highest photoactivity was achieved by the composite having 10 %wt. of nickel content. The high effectivity was showed by degradation efficiency of 95% toward Rhodamine B and 98% toward tetracycline. The examination on effect of scavengers suggests that Z-scheme involved in the photocatalytic mechanism which facilitated the efficient separation of the photogenerated electron-hole pairs under visible light illumination. In summary, the present findings provide a green approach for fabricating the effective photocatalysts for organic contaminant degradation.

Enhanced photocatalytic degradation performance of In2O3/g-C3N4 composites by coupling with H2O2

Environmental pollution by organic pollutants poses a great threat to the ecosystem and human development. Solar-powered catalytic oxidation technology can solve the existing energy and pollution crisis. Hence, in this work, cubic nano-In₂O₃ modified g-C₃N₄ composite was synthesized by in situ calcination, then it was coupled with hydrogen peroxide for the degradation of antibiotic under visible light. The results of SEM and XPS showed that In₂O₃ and g-C₃N₄ were closely combined. The catalytic oxidation efficiency of the antibiotic doxycycline was greatly improved when the as-prepared compound was coupled with hydrogen peroxide, and 88.2% of doxycycline was degraded within 80 min. By designing the active species inhibition test, it was found that a large number of hydroxyl radicals were generated in the system after adding hydrogen peroxide, which accelerated the degradation of the target. Hydrogen peroxide not only acts as a source of hydroxyl radical, but also as an active electron acceptor, which promotes the separation of photogenerated electron-hole pairs in the composite photocatalyst. Therefore, the double oxidation system formed by In₂O₃/g-C₃N₄ coupled with hydrogen peroxide can degrade the target at a higher rate. This work provided a research basis for the synthesis of In₂O₃ with regular morphology and simplified synthesis of In₂O₃/g-C₃N₄, and explored the practicability of the coupling method of double advanced oxidation for pollutant degradation.

Sonocatalytic degradation of tetracycline hydrochloride with CoFe2O4/g-C3N4 composite

In this work, different mass percent ratios of CoFe₂O₄ coupled g-C₃N₄ (w%-CoFe₂O₄/g-C₃N₄, CFO/CN) nanocomposites were integrated through a hydrothermal process for the sonocatalytic eradication of tetracycline hydrochloride (TCH) from aqueous media. The prepared sonocatalysts were subjected to various techniques to investigate their morphology, crystallinity, ultrasound wave capturing activity and charge conductivity. From the investigated activity of the composite materials, it has been registered that the best sonocatalytic degradation efficiency of 26.71 % in 10 min was delivered when the amount of CoFe₂O₄ was 25% in the nanocomposite. The delivered efficiency was higher than that of bare CoFe₂O₄ and g-C₃N₄. This enriched sonocatalytic efficiency was credited to the accelerated charge transfer and separation of e^--h⁺ pair through the S-scheme heterojunctional interface. The trapping experiments confirmed that all the three species i.e. ^•OH, h⁺ and ^•O₂^- were involved in the eradication of antibiotics. A strong interaction was shown up between CoFe₂O₄ and g-C₃N₄ in the FTIR study to support charge transfer as confirmed from the photoluminescence and photocurrent analysis of the samples. This work will provide an easy approach for fabricating highly efficient low-cost magnetic sonocatalysts for the eradication of hazardous materials present in our environment.

One-pot facile synthesis of hexagonal Bi2Te3 nanosheets and its novel nanocomposites: Characterization, anticancer, antibacterial, and antioxidant activities

Bismuth Telluride (Bi₂Te₃) layered structure results in extraordinary features in diagnostic and therapeutic applications. However, Bi₂Te₃ synthesis with reliable stability and biocompatibility in biological systems was the major challenge that limited its biological application. Herein, reduced graphene oxide (RGO) or graphitic carbon nitride (CN) nanosheets were incorporated into Bi₂Te₃ matrix to improve exfoliation. Bi₂Te₃ nanoparticles (NPs) and its novel nanocomposites (NCs): CN@Bi₂Te₃ and CN-RGO@Bi₂Te₃ were solvothermally synthesized, physiochemically characterized and assessed for their anticancer, antioxidant, and antibacterial activities. X-ray diffraction depicted Bi₂Te₃ rhombohedral lattice structure. Fourier-transform infrared and Raman spectra confirmed NC formation. Scanning and transmission electron microscopy revealed 13 nm thickness and 400-600 nm diameter of hexagonal, binary, and ternary nanosheets of Bi₂Te₃-NPs/NCs. Energy dispersive X-ray Spectroscopy revealed the presence of Bi, Te, and carbon atoms in the tested NPs with negatively charged surfaces as depicted by zeta sizer. CN-RGO@Bi₂Te₃-NC displayed the smallest nanodiameter (359.7 nm) with the highest Brunauer-Emmett-Teller surface area and antiproliferative activity against MCF-7, HepG2 and Caco-2. Bi₂Te₃-NPs had the greatest scavenging activity (96.13 ± 0.4%) compared to the NCs. The NPs inhibitory activity was greater against Gram-negative bacteria than that of Gram-positive bacteria. Integration of RGO and CN with Bi₂Te₃-NPs enhanced their physicochemical properties and therapeutic activities giving rise to their promising capacity for future biomedical applications.

NiO/g-C3N4 composite for enhanced photocatalytic properties in the wastewater treatment

The massive discharge of colored wastewater has seriously harmed the environment and people's health. Photocatalysis technology is an effective method to purify colored wastewater and has been widely concerned in colored wastewater treatment. In this study, based on the obtained nickel oxide (NiO) nanospheres by solvothermal method and graphite phase carbon nitride (g-C₃N₄) nanosheets by thermal polymerization method, the p-n heterojunction composed of NiO nanospheres and g-C₃N₄ nanosheets was successfully constructed by heat treatment for the photocatalytic degradation of methyl orange (MO). The morphology, crystallinity, surface features, and optical properties of the NiO/g-C₃N₄ composites were investigated by various characterization methods such as scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffractometer (XRD), Fourier transform infrared spectrometer (FT-IR), X-ray photoelectron spectroscopy (XPS), UV-vis spectrophotometer, and fluorescence spectrometer (PL), which provided the evidence for the formation of the heterojunction between NiO and g-C₃N₄. Compared with the g-C₃N₄ nanosheets and NiO nanospheres, the NiO/g-C₃N₄ composites showed the improved photocatalytic activity for the degradation of MO under visible light irradiation. And the NiO/g-C₃N₄ composite with the mole ratio of NiO and g-C₃N₄ of 2:8 displayed the best photocatalytic activity of MO, and more than 90% of MO can be degraded under the illumination of 100 min. The high photocatalytic properties over the NiO/g-C₃N₄ composite may be due to high specific surface area, the perfect band matching, and the formation of the p-n heterojunction, which helps to promote interfacial charge transfer and hinder the recombination of photo-generated electrons and holes. Moreover, the NiO/g-C₃N₄ composite exhibits the universality and cyclic stability, which is expected to have broad application prospects in the treatment of colored wastewater.

Investigation of the photocatalytic and optical properties of the SrMoO4/g-C3N4 heterostructure obtained via sonochemical synthesis with temperature control

In this work, nanomaterials of the SrMoO₄/g-C₃N₄ heterostructure were synthesized in a single step by the sonochemical method with controlled temperatures. Structural and morphological investigations indicate the formation of heterojunctions, revealing the presence of g-C₃N₄ (CN) in the heterostructures and an interface region between the phases. Optical analyzes show broadening of the wavelength absorption range and a decrease in the photoluminescence (PL) intensity of the heterojunctions compared to the CN emission spectrum, proving a decrease in the recombination of the photogenerated charges. The results of the photocatalytic tests indicate that the insertion of CN promoted photocatalytic degradation of the Methylene Blue (MB), Rhodamine B (RhB) and Crystal Violet (CV) organic contaminants, up to 99.58%, 100% and 98.65%, respectively. The mixture of dyes used and reuse cycles was performed to analyze the applicability of the compounds in a real situation.

Oil mediated green synthesis of nano silver in the presence of surfactants for catalytic and food preservation application

The present study details the green synthesis of silver nanoparticles using clove oil as a reducing and stabilizing agent. Cationic, anionic, nonionic and zwitterionic surfactants were introduced to study the change in size, shape, and morphology of nanoparticles. The nanoparticles were characterized using different techniques. The nanoparticles had shown specific surface Plasmon resonance band with absorbance between 380 and 385 nm. The X-ray diffraction study revealed that the nanoparticles are composed of spherical cubic crystals with average size between 136 and 180 nm while Dynamic Laser scattering (DLS) studies revealed an effective diameter of 82 nm and polydispersity index of 0.005. Thermogravimetric analysis suggested that the particles are stable even at 600 °C. All the samples presented good antibacterial and antifungal efficacies against Staphylococcus aureus, Klebsiella pneumonia and Candida albicans and good catalytic activities for the degradation of fast green and Allura red dyes. Further, thin edible films of the nanoparticles were prepared using sodium alginate for food preservation. The films were coated on fruits and vegetables for extending their shelf life to cope with demand and supply gap.

Photocatalytic degradation of tetracycline hydrochloride with g-C3N4/Ag/AgBr composites

Graphite carbon nitride (g-C₃N₄), as a polymer semiconductor photocatalyst, is widely used in the treatment of photocatalytic environmental pollution. In this work, a Z-scheme g-C₃N₄/Ag/AgBr heterojunction photocatalyst was prepared based on the preparation of a g-C₃N₄-based heterojunction via in-situ loading through photoreduction method. The g-C₃N₄/Ag/AgBr composite showed an excellent photocatalytic performance in the degradation of tetracycline hydrochloride pollutants. Among the prepared samples, g-C₃N₄/Ag/AgBr-8% showed the best photocatalytic ability for the degradation of tetracycline hydrochloride, whose photocatalytic degradation kinetic constant was 0.02764 min^-1, which was 9.8 times that of g-C₃N₄, 2.4 times that of AgBr, and 1.9 times that of Ag/AgBr. In the photocatalytic process, ^•O^2- and ^•OH are main active oxygen species involved in the degradation of organic pollutants. The photocatalytic mechanism of g-C₃N₄/Ag/AgBr is mainly through the formation of Z-scheme heterojunctions, which not only effectively improves the separation efficiency of photogenerated electron-hole pairs, but also maintains the oxidation and reduction capability of AgBr and g-C₃N₄, respectively.

NiFe2O4/g-C3N4 heterostructure with an enhanced ability for photocatalytic degradation of tetracycline hydrochloride and antibacterial performance

In this work, NiFe₂O₄/g-C₃N₄ heterostructure was prepared and used for the photocatalytic decomposition of tetracycline hydrochloride antibiotic and for inactivation of E. coli bacteria. The fabricated NiFe₂O₄/g-C₃N₄ composite displayed enhanced ability for photodegradation of organic pollutants and disinfection activities compared to the bare samples, because of the enhancement of visible light absorbance, heterojunction formation and photo-Fenton process. The optimized sample 10%-NiFe₂O₄/g-C₃N₄ has photodegraded 94.5% of tetracycline hydrochloride in 80 min. The active species trapping experiments revels that ·O₂^-, h⁺ and •OH are key decomposing species participated in the antibiotic degradation. It is hoped that the present study will provide a better understanding to fabricate efficient photocatalysts for the decomposition of organic pollutants and disinfection of bacteria.

Preparation and comparative evaluation of PVC/PbO and PVC/PbO/graphite based conductive nanocomposites

Two series, A and B, of PVC based nanocomposite polymer membranes (nCPMs) were prepared using PbO only and PbO/graphite mixture as a filler by solution casting method. Seven samples with varying compositions (5–35%) of filler particles were prepared for each series and were compared by thickness measurements, porosity, water uptake, swelling degree, ionic conductivity, ion exchange capacity (IEC), membrane potential and transport number. The maximum values for these characteristics were observed as 0.402 mm, 0.77, 141.3%, 0.11, 0.0033 Scm−1, 8.6 milli-eq.g−1, 0.19 V and 0.01391 for series-A composites whereas that of 0.367 mm, 0.83, 63.4%, 0.019, 0.00981 Scm−1, 5.21 milli-eq.g−1, 0.13 V and 0.0108 for series-B nCPMs respectively. The SEM images of membranes showed greater voids produced in the series-B compared to series-A composites. The maximum Ionic conductivity, IEC, membrane potential and transport number were observed for membrane with 25% PbO/graphite, 20% PbO and 35% PbO particles respectively.

Visible-light photocatalysis of Ag-doped graphitic carbon nitride for photodegradation of micropollutants in wastewater

This work reports on graphitic carbon nitride (C₃N₄) modified with silver to investigate its visible-light-driven photocatalysis for decomposition of micropollutants in wastewater. Various characterization methods were conducted to examine the physico-chemical properties of Ag-doped C₃N₄ (Ag-C₃N₄) photocatalyst. The results from structural, morphological, and surface chemical analysis indicated that C₃N₄ was successfully doped with Ag. Photoluminescence and transient photocurrent density studies revealed that the recombination rate of electron-hole pairs was reduced, leading to the enhancement of photocatalytic activities of the photocatalyst. Ag-C₃N₄ showed high photocatalytic performance for photodegradation of our target micropollutant, bisphenol A (BA). It could completely remove BA in 1 h with kinetic constant 6.2 times higher than that of the undoped C₃N₄ photocatalyst. Recycling test and the assessment of the photocatalyst in wastewater further confirmed the excellent stability and applicability of the Ag-C₃N₄ photocatalyst. This work could provide a new solution to the practical application of photocatalyts for the degradation of micropollutants in wastewater.

Light-assisted coupling of phenols with CO2 to 2-hydroxybenzaldehydes catalyzed by a g-C3N4/NH2-MIL-101(Fe) composite

The present work described a novel photocatalytic approach for the synthesis of 2-hydroxybenzaldehydes from the coupling of phenols and CO2 in the presence of a base using a graphitic carbon nitride/NH2-MIL-101(Fe) composite under mild conditions.

Photocatalytic Removal of Antibiotics on g-C3N4 Using Amorphous CuO as Cocatalysts

Amorphous CuO is considered as an excellent cocatalyst, owing to its large surface area and superior conductivity compared with its crystalline counterpart. The current work demonstrates a facile method to prepare amorphous CuO, which is grown on the surface of graphitic carbon nitride (g-C3N4) and is then applied for the photocatalytic degradation of tetracycline hydrochloride. The prepared CuO/g-C3N4 composite shows higher photocatalytic activities compared with bare g-C3N4. Efficient charge transfer between g-C3N4 and CuO is confirmed by the photocurrent response spectra and photoluminescence spectra. This work provides a facile approach to prepare low-cost composites for the photocatalytic degradation of antibiotics to safeguard the environment.

Feasibility of Solar Updraft Towers as Photocatalytic Reactors for Removal of Atmospheric Methane-The Role of Catalysts and Rate Limiting Steps

Due to the alarming speed of global warming, greenhouse gas removal from atmosphere will be absolutely necessary in the coming decades. Methane is the second most harmful greenhouse gas in the atmosphere. There is an emerging technology proposed to incorporating photocatalysis with solar updraft Towers (SUT) to remove methane from the air at a planetary scale. In this study, we present a deep analysis by calculating the potential of methane removal in relation to the dimensions and configuration of SUT using different photocatalysts. The analysis shows that the methane removal rate increases with the SUT dimensions and can be enhanced by changing the configuration design. More importantly, the low methane removal rate on conventional TiO₂ photocatalyst can be significantly improved to, for example, 42.5% on a more effective Ag-doped ZnO photocatalyst in a 200 MW SUT while the photocatalytic reaction is the rate limiting step. The factors that may further affect the removal of methane, such as more efficient photocatalysts, night operation and reaction zone are discussed as possible solutions to further improve the system.

Synthesis of Ag Loaded ZnO/BiOCl with High Photocatalytic Performance for the Removal of Antibiotic Pollutants

Ag@ZnO/BiOCl composites were successfully prepared by in situ precipitation and hydrothermal synthesis and used for the photocatalytic degradation of tetracycline hydrochloride antibiotics. An enhanced photodegradation efficiency was detected after loading Ag nanoparticles, which is attributed to the surface plasmon resonance effect. The optimized sample containing 4% Ag showed 80.4% degradation efficiency in 80 min, which is 2.1 and 1.9 times higher than those of ZnO and ZnO/BiOCl, respectively. The major degrading species involved in the photocatalytic process were detected to be super oxide anions and holes. Based on the obtained results, a possible charge transfer and degradation mechanism has been proposed. This study shows that Ag@ZnO/BiOCl catalyst has a good potential for photodegradation of organic pollutants in water.

Conjugated Cationic Pp-x Formed on g-C3N4 for Photocatalyzed Water Splitting

Polycationic Pp-x@g-C₃N₄ composite was synthesized through an in situ polymerization process of N-alkylpyridinium acetylenic alcohol bromide (p-x) above the surface of g-C₃N₄. The structure of p-0 and the Pp-x@g-C₃N₄ properties were checked by modern technologies. Photocatalytic tests of Pp-x@g-C₃N₄ in water splitting unveiled much better Pp-x@g-C₃N₄ hydrogen evolution activities by comparison with both g-C₃N₄ and Pp-0. The hydrogen production by Pp-0@g-C₃N₄ was 1654.5 μmol h^-1 g^-1, which is ∼26- and 22-fold greater in relation to what g-C₃N₄ and Pp-0 produced (62.7 and 75.0 μmol h^-1 g^-1, respectively), suggesting strong bilateral and synergistic interactions of g-C₃N₄ with Pp-0. Although the lengthening methylene chain in the polymers weakened the hydrogen generation ability of Pp-x@g-C₃N₄, the conjugated double bonds, solubilization, and dispersion of Pp-x polycationic surfactants made Pp-x@g-C₃N₄ superior to g-C₃N₄ in water splitting. Due to the readily available raw materials, a simple way of preparation (starting chemicals to p-0 to Pp-0@g-C₃N₄), high photocatalysis efficiency, light irritation stability, recyclable ability, and low toxicity, Pp-0@g-C₃N₄ is a good candidate for water splitting.

Ionic liquid-assisted synthesis of porous boron-doped graphitic carbon nitride for photocatalytic hydrogen production

This work presents a simple way to prepare boron-doped graphitic carbon nitride (B/g-C₃N₄), exhibiting an enhanced photocatalytic performance to split water for hydrogen production. B/g-C₃N₄ was synthesized via the pyrolysis of urea and 1-ethyl-3-methylimidazolium tetrafluoroborate ([Emim]BF₄), which was adopted as the boron source. The aggregate of B/g-C₃N₄ nanosheets shows a porous structure since some bubbles are generated under the heat decomposition of ionic liquids. The porous structure is conducive to the exposure of more active sites. Moreover, B-doping will form some localized electronic energy levels in the band gap of g-C₃N₄, thereby extending its visible light response. As impacted by the porous structure of B/g-C₃N₄ aggregate and the narrow the band gap, the photocatalytic hydrogen generation rate (901 μmol h^-1 g^-1) is increased, almost 3 times faster than g-C₃N₄ (309 μmol h^-1 g^-1). This work proposed a simple method to prepare the aggregate of B/g-C₃N₄ nanosheets exhibiting pores under ionic liquid assistance. It can be a novel method to design porous polymer photocatalysts.

Extended visible light driven photocatalytic hydrogen generation by electron induction from g-C3N4 nanosheets to ZnO through the proper heterojunction

The alarming energy crises has forced the scientific community to work for sustainable energy modules to meet energy requirements. As for this, ZnO/g-C3N4 nanocomposites with proper heterojunction were fabricated by coupling a proper amount of ZnO with 2D graphitic carbon nitride (g-C3N4) nanosheets and the obtained nanocomposites were applied for photocatalytic hydrogen generation from water under visible light illumination (λ > 420 nm). The morphologies and the hydrogen generation performance of fabricated photocatalysts were characterized in detail. Results showed that the optimized 5ZnO/g-C3N4 nanocomposite produced 70 µmol hydrogen gas in 1 h compare to 8 µmol by pure g-C3N4 under identical illumination conditions in the presence of methanol without the addition of cocatalyst. The much improved photoactivities of the nanocomposites were attributed to the enhanced charge separation through the heterojunction as confirmed from photoluminescence study, capacity of the fabricated samples for •OH radical generation and steady state surface photovoltage spectroscopic (SS-SPS) measurements. We believe that this work would help to fabricate low cost and effective visible light driven photocatalyst for energy production.

Synthesis and physiochemical performances of PVC-sodium polyacrylate and PVC-sodium polyacrylate-graphite composite polymer membrane

Three types (type-A, B, and C) of composite polymeric membranes (CPMs) based on poly vinyl chloride (PVC) and different fillers (sodium polyacrylate and sodium polyacrylate-graphite) soaked in water and 0.5 N HCl were prepared using solvent casting method. Different physicochemical parameters such as microscopic surface study, water uptake, perpendicular swelling, density, porosity (ε), ion exchange capacity, and conductivity of the as the prepared CPMs were evaluated. Interestingly, type-A CPM cast with filler-A has greater values of the above parameters except density and ionic conductivity than those of type-B and C CPMs. The water uptake of type-A, B and C composite membranes was respectively in the range of 220.42–534.70, 59.64–41.65, and 15.94–2.62%. Ion exchange capacity of type-A, B and C CPMs was in the range of 3.669 × 107–2.156 × 107, 5.948 × 107–1.258 × 107, and 1.454 × 107–1.201 × 107 m.eq.g−1 respectively while the conductivity order was type-A < B < C. These types of CPMs may be helpful in many applications including proton exchange membranes, fuel cell like devices, as sensors for different metals, gas purification, water treatment, and battery separators.

Review on the hazardous applications and photodegradation mechanisms of chlorophenols over different photocatalysts

Chlorophenols are very important environmental pollutants, which have created huge problems for both aquatic and terrestrial lives. Therefore, their removal needs urgent, effective, and advanced technologies to safeguard our environment for future generation. This review encompasses a comprehensive study of the applications of chlorophenols, their hazardous effects and photocatalytic degradation under light illumination. The effect of various factors such as pH and presence of different anions on the photocatalytic oxidation of chlorophenols have been elaborated comprehensively. The production of different oxidizing agents taking part in the photodegradation of chlorophenols are given a bird eye view. The photocatalytic degradation mechanism of different chlorophenols over various photocatalyts has been discussed in more detail and elaborated that how different photocatalysts degrade the same chlorophenols with the aid of different oxidizing agents produced during photocatalysis. Finally, a future perspective has been given to deal with the effective removal of these hazardous pollutants from the environment.

NiP/CuO composites: Electroless plating synthesis, antibiotic photodegradation and antibacterial properties

This work reports a simple method to prepare nickel-phosphorus (Ni-P) alloy modified CuO (Ni-P/CuO) composite, which shows excellent performance in terms of photodegradation antibiotics, particularly regarding the antibacterial properties. The Ni-P/CuO composites were prepared via two steps. The first step was to produce CuO by the hydrothermal method and the second step was to grow Ni-P in-situ on the surface of CuO through electroless plating. After loading of Ni-P, the photocatalytic activity of CuO for the decomposition of antibiotics is significantly increased under visible light irradiation. The photocatalytic activity of Ni-P/CuO with 4 wt% Ni-P loading is 25 times higher than that of CuO. Compared with CuO, the antibacterial activity of Ni-P/CuO with 4 wt% Ni-P loading against Escherichia coli is strongly increased. Based on the photoluminescence and photocurrent measurements of CuO and Ni-P/CuO, Ni-P cocatalyst improves the separation and transfer of the photogenerated charge in CuO, and enhances the photocatalytic activity of antibacterial performance. This work reveals that using Ni-P as the cocatalyst can strengthen the photocatalytic performance of CuO, which has great application potential in water purification and antibacterial treatments.

Selective electromembrane extraction and sensitive colorimetric detection of copper(II)

In this study, an extremely effective electromembrane extraction (EME) method was developed for the selective extraction of Cu(II) followed by Red-Green-Blue (RGB) detection. The effective parameters optimized for the extraction efficiency of EME include applied voltage, extraction time, supported liquid membrane (SLM) composition, pH of acceptor/donor phases, and stirring rate. Under optimized conditions, Cu(II) was extracted from a 3 mL aqueous donor phase to 8 µL of 100 mM HCl acceptor solution through 1-octanol SLM using an applied voltage of 50 V for 15 min. The proposed method provides a working range of 0.1–0.75 µg·mL−1 with 0.03 µg·mL−1 limit for detection. Finally, the developed technique was applied to different environmental water samples for monitoring environmental pollution. Obtained relative recoveries were within the range of 93–106%. The relative standard deviation (RSD) and enhancement factor (EF) were found to be ≤4.8% and 100 respectively. We hope that this method can be introduced for quantitative determination of Cu(II) as a fast, simple, portable, inexpensive, effective, and precise procedure.