Expression of the cry9Aa2 B.t. gene in tobacco chloroplasts confers resistance to potato tuber moth

Posttranscriptional tuning of gene expression over a large dynamic range in synthetic tobacco chloroplast operons

Achieving optimally balanced gene expression within synthetic operons requires regulatory elements capable of providing a spectrum of expression levels. In this study, we investigate the expression of gfp reporter gene in tobacco chloroplasts, guided by variants of the plastid atpH 5' UTR, which harbors a binding site for PPR10, a protein that activates atpH at the posttranscriptional level. Our findings reveal that endogenous tobacco PPR10 confers distinct levels of reporter activation when coupled with the tobacco and maize atpH 5' UTRs in different design contexts. Notably, high GFP expression was not coupled to the stabilization of monocistronic gfp transcripts in dicistronic reporter lines, adding to the evidence that PPR10 activates translation via a mechanism that is independent of its stabilization of monocistronic transcripts. Furthermore, the incorporation of a tRNA upstream of the UTR nearly abolishes gfp mRNA (and GFP protein), presumably by promoting such rapid RNA cleavage and 5' exonucleolytic degradation that PPR10 had insufficient time to bind and protect gfp RNA, resulting in a substantial reduction in GFP accumulation. When combined with a mutant atpH 5' UTR, the tRNA leads to an exceptionally low level of transgene expression. Collectively, this approach allows for tuning of reporter gene expression across a wide range, spanning from a mere 0.02-25% of the total soluble cellular protein. These findings highlight the potential of employing cis-elements from heterologous species and expand the toolbox available for plastid synthetic biology applications requiring multigene expression at varying levels.

Cell wall-localized Bt protein endows rice high resistance to Lepidoptera pests

BACKGROUND

The commercialized Bt (Bacillus thuringiensis) crops accumulate Bt protein within cells, but the intracellular interactions of foreign protein with endogenous protein inevitably result in large or small unintended effects. In this study, the Bt gene Cry1Ca was linked with the sequences of extracellular secretion signal peptide and carbohydrate binding module 11 to constitute a fusion gene SP-Cry1Ca-CBM11, and the fusion gene driven by constitutive promoters was used for secreting and anchoring onto the cell wall to minimize unintended effects.

RESULTS

The transient expression in tobacco leaves demonstrated that the fusion protein was anchored on cell walls. The Cry1Ca contents of five homozygous rice transformants of single-copy insertion were different and descended in the order leaf > root > stem. The maximum content of Cry1Ca was 17.55 μg g-1 in leaves of transformant 21H037. The bioassay results revealed that the transformants exhibited high resistance to lepidopteran pests. The corrected mortality of pink stem borer (Sesamia inferens) and striped stem borer (Chilo suppressalis) ranged from 96.33% to 100%, and from 83.32% to 100%, respectively, and the corrected mortality of rice leaf roller (Cnaphalocrocis medinalis) was 92.53%. Besides, the agronomic traits of the five transformants were normal and similar to that of the recipient, and the transformants were highly resistant to glyphosate at the germination and seedling stages.

CONCLUSION

The fusion Bt protein was accumulated on cell walls and endowed the rice with high resistance to lepidopteran pests without unintended effects in agronomic traits. © 2023 Society of Chemical Industry.

Chloroplast Genome Engineering: A Plausible Approach to Combat Chili Thrips and Other Agronomic Insect Pests of Crops

The world population's growing demand for food is expected to increase dramatically by 2050. The agronomic productivity for food is severely affected due to biotic and abiotic constraints. At a global level, insect pests alone account for ~20% loss in crop yield every year. Deployment of noxious chemical pesticides to control insect pests always has a threatening effect on human health and environmental sustainability. Consequently, this necessitates for the establishment of innovative, environmentally friendly, cost-effective, and alternative means to mitigate insect pest management strategies. According to a recent study, using chloroplasts engineered with double-strand RNA (dsRNA) is novel successful combinatorial strategy deployed to effectively control the most vexing pest, the western flower thrips (WFT: Frankliniella occidentalis). Such biotechnological avenues allowed us to recapitulate the recent progress of research methods, such as RNAi, CRISPR/Cas, mini chromosomes, and RNA-binding proteins with plastid engineering for a plausible approach to effectively mitigate agronomic insect pests. We further discussed the significance of the maternal inheritance of the chloroplast, which is the major advantage of chloroplast genome engineering.

An analysis of codon utilization patterns in the chloroplast genomes of three species of Coffea

BACKGROUND

The chloroplast genome of plants is known for its small size and low mutation and recombination rates, making it a valuable tool in plant phylogeny, molecular evolution, and population genetics studies. Codon usage bias, an important evolutionary feature, provides insights into species evolution, gene function, and the expression of exogenous genes. Coffee, a key crop in the global tropical agricultural economy, trade, and daily life, warrants investigation into its codon usage bias to guide future research, including the selection of efficient heterologous expression systems for coffee genetic transformation.

RESULTS

Analysis of the codon utilization patterns in the chloroplast genomes of three Coffea species revealed a high degree of similarity among them. All three species exhibited similar base compositions, with high A/T content and low G/C content and a preference for A/T-ending codons. Among the 30 high-frequency codons identified, 96.67% had A/T endings. Fourteen codons were identified as ideal. Multiple mechanisms, including natural selection, were found to influence the codon usage patterns in the three coffee species, as indicated by ENc-GC3s mapping, PR2 analysis, and neutral analysis. Nicotiana tabacum and Saccharomyces cerevisiae have potential value as the heterologous expression host for three species of coffee genes.

CONCLUSION

This study highlights the remarkable similarity in codon usage patterns among the three coffee genomes, primarily driven by natural selection. Understanding the gene expression characteristics of coffee and elucidating the laws governing its genetic evolution are facilitated by investigating the codon preferences in these species. The findings can enhance the efficacy of exogenous gene expression and serve as a basis for future studies on coffee evolution.

Chloroplast Engineering: Fundamental Insights and Its Application in Amelioration of Environmental Stress

Chloroplasts are specialized organelle that are responsible for converting light energy to chemical energy, thereby driving the carbon dioxide fixation. Apart from photosynthesis, chloroplast is the site for essential cellular processes that determine the plant adaptation to changing environment. Owing to the presence of their own expression system, it provides an optimum platform for engineering valued traits as well as site for synthesis of bio-compounds. Advancements in technology have further enhanced the scope of using chloroplast as a multifaceted tool for the biotechnologist to develop stress-tolerant plants and ameliorate environmental stress. Focusing on chloroplast biotechnology, this review discusses the advances in chloroplast engineering and its application in enhancing plant adaptation and resistance to environmental stress and the development of new bioproducts and processes. This is accomplished through analysis of its biogenesis and physiological processes, highlighting the chloroplast engineering and recent developments in chloroplast biotechnology. In the first part of the review, the evolution and principles of structural organization and physiology of chloroplast are discussed. In the second part, the chief methods and mechanisms involved in chloroplast transformation are analyzed. The last part represents an updated analysis of the application of chloroplast engineering in crop improvement and bioproduction of industrial and health compounds.

Identification and validation of the wound and insect bite early inducible promoter from Arabidopsis thaliana

A wound-inducible promoter facilitates the regulated gene expression at the targeted site during the time of mechanical stress or infestation by the pathogen. The present work has aimed to identify a wound-inducible promoter that expresses at early time points preceding wound-stress treatment in Arabidopsis thaliana. The computational analysis of microarray data (GSE5627) resulted in the identification of five early inducible genes, viz., AT1G17380, AT1G80440, AT2G43530, AT3G48360, and AT5G13220. The RT-PCR analysis showed AT5G13220 (JASMONATE-ASSOCIATED 1) gene induced at a significantly higher level post 30 min of wounding. Thus, the promoter of the highly induced and early expressed wound-inducible gene, AT5G13220 (named PW220), was characterized by fusing with β-glucuronidase (gusA) reporter or Cry1EC genes. The fluorometric analysis and histochemical staining of the gusA gene and quantitative estimation of Cry1EC protein in Nicotiana tabacum transgenic lines confirmed wound-induced expression characteristic of the selected promoter. Insect bioassay suggested that wound-inducible and constitutive expression of Cry1EC protein in transgenic lines showed a similar level of protection against different instar Spodoptera litura larvae. Furthermore, we identified that abscisic acid influenced the wound-specific expression of the selected PW220 promoter in the transgenic lines, which correlates with the presence of conserved cis-regulatory elements associated with dehydration and abscisic acid responses. Altogether, our results suggested that the wound-inducible promoter PW220 provides an excellent alternative for developing insect-tolerant transgenic crops in the future.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13205-022-03143-0.

Targeting delta-endotoxin (Cry1Ac) of Bacillus thuringiensis to subcellular compartments increases the protein expression, stability, and biological activity

Evolving insect resistance to delta-endotoxins can be delayed by using a few strategies like high dosage, refugia, and gene stacking which require the expression of delta-endotoxins at sufficiently high levels to kill the resistant insects. In this study, we comparatively analyzed the efficacy of targeting truncated cry1Ac protein to the cytoplasm, endoplasmic reticulum (ER), and chloroplast to obtain high protein expression. mRNA and protein profiling of cry1Ac showed that both ER and chloroplast are efficient targets for expressing high levels of truncated cry1Ac. A maximum of 0.8, 1.6, and 2.0% cry1Ac of total soluble protein were obtained when the truncated cry1Ac was expressed in the cytoplasm, routed through ER, and targeted to the chloroplast. We further showed that not only the protein content but also the biological activity of truncated cry1Ac increases by sub-cellular targeting and the biological activity is slightly greater in the ER routed transgenic lines by conducting different bioassays on Helicoverpa armigera. Using native Western analysis, we demonstrated that the truncated cry1Ac protein could exist as oligomers in plant cells and this oligomerization capability is low in the cytoplasm. In conclusion, routing of delta endotoxins through ER is the first choice to obtain high protein expression and bioactivity.

Assessment on effects of transplastomic potato plants expressing Colorado potato beetle β-Actin double-stranded RNAs for three non-target pests

RNA interference has been proved as an efficient technology for pest control through the silencing of essential genes of targeted insects. We had previously shown that the expression of double-stranded RNAs (dsRNAs) in plastids of plants offers a great potential for efficiently controlling Colorado potato beetle (CPB, Leptinotarsa decemlineata) (Coleoptera, Chrysomelidae). However, whether these transplastomic plants have an impact on other non-target pests was not investigated. In this study, we evaluated the potential effects of transplastomic plants expression dsRNAs target CPB β-Actin (referred to as ACT plants) on three other potato pests: Myzus persicae (Hemiptera, Aphididae), Henosepilachna vigintioctopunctata (Coleoptera, Coccinellidae), and Spodoptera litura (Lepidoptera, Noctuidae). Although no effects on M. persicae or S. litura were observed by feeding ACT plants, we found that feeding H. vigintioctopunctata with ACT plants can result in its growth retardation and suppressing the gene expression of HvACT, which has 91.7% identity to CPB β-Actin and shared 66 potential 21-mer matches. Taking together, these results indicated that ACT plants had cross-resistance to H. vigintioctopunctata, another coleopteran insect with the highly conserved nucleotide sequence of β-Actin gene. It also provided an opportunity to simultaneously control L. decemlineata and H. vigintioctopunctata by RNAi induced by intermediate dsRNAs with optimized sequences.

Advancing organelle genome transformation and editing for crop improvement

Plant cells contain three organelles that harbor DNA: the nucleus, plastids, and mitochondria. Plastid transformation has emerged as an attractive platform for the generation of transgenic plants, also referred to as transplastomic plants. Plastid genomes have been genetically engineered to improve crop yield, nutritional quality, and resistance to abiotic and biotic stresses, as well as for recombinant protein production. Despite many promising proof-of-concept applications, transplastomic plants have not been commercialized to date. Sequence-specific nuclease technologies are widely used to precisely modify nuclear genomes, but these tools have not been applied to edit organelle genomes because the efficient homologous recombination system in plastids facilitates plastid genome editing. Unlike plastid transformation, successful genetic transformation of higher plant mitochondrial genome transformation was tested in several research group, but not successful to date. However, stepwise progress has been made in modifying mitochondrial genes and their transcripts, thus enabling the study of their functions. Here, we provide an overview of advances in organelle transformation and genome editing for crop improvement, and we discuss the bottlenecks and future development of these technologies.

Green giant-a tiny chloroplast genome with mighty power to produce high-value proteins: history and phylogeny

Free-living cyanobacteria were entrapped by eukaryotic cells ~2 billion years ago, ultimately giving rise to chloroplasts. After a century of debate, the presence of chloroplast DNA was demonstrated in the 1960s. The first chloroplast genomes were sequenced in the 1980s, followed by ~100 vegetable, fruit, cereal, beverage, oil and starch/sugar crop chloroplast genomes in the past three decades. Foreign genes were expressed in isolated chloroplasts or intact plant cells in the late 1980s and stably integrated into chloroplast genomes, with typically maternal inheritance shown in the 1990s. Since then, chloroplast genomes conferred the highest reported levels of tolerance or resistance to biotic or abiotic stress. Although launching products with agronomic traits in important crops using this concept has been elusive, commercial products developed include enzymes used in everyday life from processing fruit juice, to enhancing water absorption of cotton fibre or removal of stains as laundry detergents and in dye removal in the textile industry. Plastid genome sequences have revealed the framework of green plant phylogeny as well as the intricate history of plastid genome transfer events to other eukaryotes. Discordant historical signals among plastid genes suggest possible variable constraints across the plastome and further understanding and mitigation of these constraints may yield new opportunities for bioengineering. In this review, we trace the evolutionary history of chloroplasts, status of autonomy and recent advances in products developed for everyday use or those advanced to the clinic, including treatment of COVID-19 patients and SARS-CoV-2 vaccine.

Mitigation of deleterious phenotypes in chloroplast-engineered plants accumulating high levels of foreign proteins

BACKGROUND

The global demand for functional proteins is extensive, diverse, and constantly increasing. Medicine, agriculture, and industrial manufacturing all rely on high-quality proteins as major active components or process additives. Historically, these demands have been met by microbial bioreactors that are expensive to operate and maintain, prone to contamination, and relatively inflexible to changing market demands. Well-established crop cultivation techniques coupled with new advancements in genetic engineering may offer a cheaper and more versatile protein production platform. Chloroplast-engineered plants, like tobacco, have the potential to produce large quantities of high-value proteins, but often result in engineered plants with mutant phenotypes. This technology needs to be fine-tuned for commercial applications to maximize target protein yield while maintaining robust plant growth.

RESULTS

Here, we show that a previously developed Nicotiana tabacum line, TetC-cel6A, can produce an industrial cellulase at levels of up to 28% of total soluble protein (TSP) with a slight dwarf phenotype but no loss in biomass. In seedlings, the dwarf phenotype is recovered by exogenous application of gibberellic acid. We also demonstrate that accumulating foreign protein represents an added burden to the plants' metabolism that can make them more sensitive to limiting growth conditions such as low nitrogen. The biomass of nitrogen-limited TetC-cel6A plants was found to be as much as 40% lower than wildtype (WT) tobacco, although heterologous cellulase production was not greatly reduced compared to well-fertilized TetC-cel6A plants. Furthermore, cultivation at elevated carbon dioxide (1600 ppm CO₂) restored biomass accumulation in TetC-cel6A plants to that of WT, while also increasing total heterologous protein yield (mg Cel6A plant^-1) by 50-70%.

CONCLUSIONS

The work reported here demonstrates that well-fertilized tobacco plants have a substantial degree of flexibility in protein metabolism and can accommodate considerable levels of some recombinant proteins without exhibiting deleterious mutant phenotypes. Furthermore, we show that the alterations to protein expression triggered by growth at elevated CO₂ can help rebalance endogenous protein expression and/or increase foreign protein production in chloroplast-engineered tobacco.

Independent translation of ORFs in dicistronic operons, synthetic building blocks for polycistronic chloroplast gene expression

We designed a dicistronic plastid marker system that relies on the plastid's ability to translate polycistronic mRNAs. The identification of transplastomic clones is based on selection for antibiotic resistance encoded in the first open reading frame (ORF) and accumulation of the reporter gene product in tobacco chloroplasts encoded in the second ORF. The antibiotic resistance gene may encode spectinomycin or kanamycin resistance based on the expression of aadA or neo genes, respectively. The reporter gene used in the study is the green fluorescent protein (GFP). The mRNA level depends on the 5'-untranslated region of the first ORF. The protein output depends on the strengths of the ribosome binding, and is proportional with the level of translatable mRNA. Because the dicistronic mRNA is not processed, we could show that protein output from the second ORF is independent from the first ORF. High-level GFP accumulation from the second ORF facilitates identification of transplastomic events under ultraviolet light. Expression of multiple proteins from an unprocessed mRNA is an experimental design that enables predictable protein output from polycistronic mRNAs, expanding the toolkit of plant synthetic biology.

Plastid Transformation: How Does it Work? Can it Be Applied to Crops? What Can it Offer?

In recent years, plant genetic engineering has advanced agriculture in terms of crop improvement, stress and disease resistance, and pharmaceutical biosynthesis. Cells from land plants and algae contain three organelles that harbor DNA: the nucleus, plastid, and mitochondria. Although the most common approach for many plant species is the introduction of foreign DNA into the nucleus (nuclear transformation) via Agrobacterium- or biolistics-mediated delivery of transgenes, plastid transformation offers an alternative means for plant transformation. Since there are many copies of the chloroplast genome in each cell, higher levels of protein accumulation can often be achieved from transgenes inserted in the chloroplast genome compared to the nuclear genome. Chloroplasts are therefore becoming attractive hosts for the introduction of new agronomic traits, as well as for the biosynthesis of high-value pharmaceuticals, biomaterials and industrial enzymes. This review provides a comprehensive historical and biological perspective on plastid transformation, with a focus on current and emerging approaches such as the use of single-walled carbon nanotubes (SWNTs) as DNA delivery vehicles, overexpressing morphogenic regulators to enhance regeneration ability, applying genome editing techniques to accelerate double-stranded break formation, and reconsidering protoplasts as a viable material for plastid genome engineering, even in transformation-recalcitrant species.

Bacillus thuringiensis cry1C expression from the plastid genome of poplar leads to high mortality of leaf-eating caterpillars

Plastid transformation technology has several attractive features compared with traditional nuclear transformation technology. However, only a handful of species are able to be successfully transformed. Here, we report an efficient and stable plastid transformation protocol for poplar, an economically important tree species grown worldwide. We transformed the Bacillus thuringiensis cry1C gene into the poplar plastid genome, and homoplasmic transplastomic poplar was obtained after two to three rounds of regeneration under antibiotic selection for 7-12 months. The transplastomic poplar expressing Cry1C insecticidal protein showed the highest accumulation level in young leaves, which reached up to 20.7 μg g-1 fresh weight, and comparatively low levels in mature and old leaves, and hardly detectable levels in non-green tissues, such as phloem, xylem and roots. Transplastomic poplar showed high toxicity to Hyphantria cunea and Lymantria dispar, two notorious forest pests worldwide, without affecting plant growth. These results are the first successful examples of insect-resistant poplar generation by plastid genome engineering and provide a new avenue for future genetic improvement of poplar plants.

Green Biotechnology: A Brief Update on Plastid Genome Engineering

Plant genetic engineering has become an inevitable tool in the molecular breeding of crops. Significant progress has been made in the generation of novel plastid transformation vectors and optimized transformation protocols. There are several advantages of plastid genome engineering over conventional nuclear transformation. Some of the advantages include multigene engineering by expression of biosynthetic pathway genes as operons, extremely high-level expression of protein accumulation, lack of transgene silencing, etc. Transgene containment owing to maternal inheritance is another important advantage of plastid genome engineering. Chloroplast genome modification usually results in alteration of several thousand plastid genome copies in a cell. Several therapeutic proteins, edible vaccines, antimicrobial peptides, and industrially important enzymes have been successfully expressed in chloroplasts so far. Here, we critically recapitulate the latest developments in plastid genome engineering. Latest advancements in plastid genome sequencing are briefed. In addition, advancement of extending the toolbox for plastid engineering for selected applications in the area of molecular farming and production of industrially important enzyme is briefed.

The plastid genome as a chassis for synthetic biology-enabled metabolic engineering: players in gene expression

Owing to its small size, prokaryotic-like molecular genetics, and potential for very high transgene expression, the plastid genome (plastome) is an attractive plant synthetic biology chassis for metabolic engineering. The plastome exists as a homogenous, compact, multicopy genome within multiple-specialized differentiated plastid compartments. Because of this multiplicity, transgenes can be highly expressed. For coordinated gene expression, it is the prokaryotic molecular genetics that is an especially attractive feature. Multiple genes in a metabolic pathway can be expressed in a series of operons, which are regulated at the transcriptional and translational levels with cross talk from the plant's nuclear genome. Key features of each regulatory level are reviewed, as well as some examples of plastome-enabled metabolic engineering. We also speculate about the transformative future of plastid-based synthetic biology to enable metabolic engineering in plants as well as the problems that must be solved before routine plastome-enabled synthetic circuits can be installed.

Recent achievements obtained by chloroplast transformation

Chloroplasts play a great role for sustained wellbeing of life on the planet. They have the power and raw materials that can be used as sophisticated biological factories. They are rich in energy as they have lots of pigment-protein complexes capable of collecting sunlight, in sugar produced by photosynthesis and in minerals imported from the plant cell. Chloroplast genome transformation offers multiple advantages over nuclear genome which among others, include: integration of the transgene via homologus recombination that enables to eliminate gene silencing and position effect, higher level of transgene expression resulting into higher accumulations of foreign proteins, and significant reduction in environmental dispersion of the transgene due to maternal inheritance which helps to minimize the major critic of plant genetic engineering. Chloroplast genetic engineering has made fruit full progresses in the development of plants resistance to various stresses, phytoremediation of toxic metals, and production of vaccine antigens, biopharmaceuticals, biofuels, biomaterials and industrial enzymes. Although successful results have been achieved, there are still difficulties impeding full potential exploitation and expansion of chloroplast transformation technology to economical plants. These include, lack of species specific regulatory sequences, problem of selection and shoot regeneration, and massive expression of foreign genes resulting in phenotypic alterations of transplastomic plants. The aim of this review is to critically recapitulate the latest development of chloroplast transformation with special focus on the different traits of economic interest.

Comparison of effectiveness of 5'-regulatory sequences in transplastomic tobacco chloroplasts

The development of tools which ensure the desired level of transgene expression in plastids is a prerequisite for the effective utilization of these plant organelles for the deployment of bioactive proteins. High-level accumulation of target proteins is considered as a positive feature of transplastomic plants, but excessive accumulation of foreign proteins may have deleterious effects on host plants. On the other hand, expression at low levels can result in ineffective phenotypes. We compared the effectiveness of different 5'-regulatory sequences in driving the expression of a reporter gene, β-glucuronidase (uidA), in tobacco chloroplasts. To achieve varying expression levels, we have chosen heterologous 5'-regulatory sequences which either differ significantly from their homologous counterparts or depend on specific nuclear encoded factors. The Medicago truncatula psbA promoter/5'-UTR supported the highest levels of protein accumulation, surpassing the other tested sequences by two to three orders of magnitude. The heterologous regulatory sequence of Phaseolus vulgaris rbcL gene was as efficient in tobacco chloroplasts as the corresponding homologous promoter/5'-UTR. The Arabidopsis thaliana ndhF promoter/5'-UTR supported as high reporter activity levels as the rbcL 5'-sequences, whereas the effectiveness of A. thaliana psbN promoter/5'-UTR was three fold lower. The characterized regulatory sequences can be utilized to establish transplastomic lines with desirable levels of target protein accumulation. The ability to control transgene expression should be useful for achieving appropriate levels of protein accumulation and thereby avoid their negative impacts on host plant physiology.

Challenges and perspectives in commercializing plastid transformation technology

Plastid transformation has emerged as an alternative platform to generate transgenic plants. Attractive features of this technology include specific integration of transgenes-either individually or as operons-into the plastid genome through homologous recombination, the potential for high-level protein expression, and transgene containment because of the maternal inheritance of plastids. Several issues associated with nuclear transformation such as gene silencing, variable gene expression due to the Mendelian laws of inheritance, and epigenetic regulation have not been observed in the plastid genome. Plastid transformation has been successfully used for the production of therapeutics, vaccines, antigens, and commercial enzymes, and for engineering various agronomic traits including resistance to biotic and abiotic stresses. However, these demonstrations have usually focused on model systems such as tobacco, and the technology per se has not yet reached the market. Technical factors limiting this technology include the lack of efficient protocols for the transformation of cereals, poor transgene expression in non-green plastids, a limited number of selection markers, and the lengthy procedures required to recover fully segregated plants. This article discusses the technology of transforming the plastid genome, the positive and negative features compared with nuclear transformation, and the current challenges that need to be addressed for successful commercialization.

Extending the biosynthetic repertoires of cyanobacteria and chloroplasts

Chloroplasts in plants and algae and photosynthetic microorganisms such as cyanobacteria are emerging hosts for sustainable production of valuable biochemicals, using only inorganic nutrients, water, CO2 and light as inputs. In the past decade, many bioengineering efforts have focused on metabolic engineering and synthetic biology in the chloroplast or in cyanobacteria for the production of fuels, chemicals and complex, high-value bioactive molecules. Biosynthesis of all these compounds can be performed in photosynthetic organelles/organisms by heterologous expression of the appropriate pathways, but this requires optimization of carbon flux and reducing power, and a thorough understanding of regulatory pathways. Secretion or storage of the compounds produced can be exploited for the isolation or confinement of the desired compounds. In this review, we explore the use of chloroplasts and cyanobacteria as biosynthetic compartments and hosts, and we estimate the levels of production to be expected from photosynthetic hosts in light of the fraction of electrons and carbon that can potentially be diverted from photosynthesis. The supply of reducing power, in the form of electrons derived from the photosynthetic light reactions, appears to be non-limiting, but redirection of the fixed carbon via precursor molecules presents a challenge. We also discuss the available synthetic biology tools and the need to expand the molecular toolbox to facilitate cellular reprogramming for increased production yields in both cyanobacteria and chloroplasts.

Chloroplast genomes: diversity, evolution, and applications in genetic engineering

Chloroplasts play a crucial role in sustaining life on earth. The availability of over 800 sequenced chloroplast genomes from a variety of land plants has enhanced our understanding of chloroplast biology, intracellular gene transfer, conservation, diversity, and the genetic basis by which chloroplast transgenes can be engineered to enhance plant agronomic traits or to produce high-value agricultural or biomedical products. In this review, we discuss the impact of chloroplast genome sequences on understanding the origins of economically important cultivated species and changes that have taken place during domestication. We also discuss the potential biotechnological applications of chloroplast genomes.

In-Plant Protection against Helicoverpa armigera by Production of Long hpRNA in Chloroplasts

Expressing double-stranded RNA (dsRNA) in transgenic plants to silence essential genes within herbivorous pests is referred to as trans-kingdom RNA interference (TK-RNAi) and has emerged as a promising strategy for crop protection. However, the dicing of dsRNA into siRNAs by the plant's intrinsic RNAi machinery may reduce this pesticidal activity. Therefore, genetic constructs, encoding ∼200 nt duplex-stemmed-hairpin (hp) RNAs, targeting the acetylcholinesterase gene of the cotton bollworm, Helicoverpa armigera, were integrated into either the nuclear or the chloroplast genome of Nicotiana benthamiana. Undiced, full-length hpRNAs accumulated in transplastomic lines of N. benthamiana and conferred strong protection against H. armigera herbivory while the hpRNAs of nuclear-transformed plants were processed into siRNAs and gave more modest anti-feeding activity. This suggests that there is little or no RNAi machinery or activity in the chloroplast, that hpRNAs produced within this organelle do not enter the cytoplasm, and that oral delivery of chloroplast-packaged intact hpRNA is a more effective means of delivering TK-RNAi than using nuclear encoded hpRNAs. This contrasts with a recently reported correlation between siRNA expression and effectiveness of TK-RNAi targeting the chitinase gene of H. armigera, but is consistent with reports of efficient TK-RNAi by dsRNA generated in chloroplasts by converging promoters flanking a pest gene sequence and from very small (21 nt-stem) hpRNAs resembling artificial miRNAs. Here we demonstrate that hpRNAs, constructed along the conventional design principles of plant RNAi constructs but integrated into the chloroplast genome, are stable and effective over multiple generations, and hold the promise of providing durable pest resistance in crops.

Protein maturation and proteolysis in plant plastids, mitochondria, and peroxisomes

Plastids, mitochondria, and peroxisomes are key organelles with dynamic proteomes in photosynthetic eukaryotes. Their biogenesis and activity must be coordinated and require intraorganellar protein maturation, degradation, and recycling. The three organelles together are predicted to contain ∼200 presequence peptidases, proteases, aminopeptidases, and specific protease chaperones/adaptors, but the substrates and substrate selection mechanisms are poorly understood. Similarly, lifetime determinants of organellar proteins, such as N-end degrons and tagging systems, have not been identified, but the substrate recognition mechanisms likely share similarities between organelles. Novel degradomics tools for systematic analysis of protein lifetime and proteolysis could define such protease-substrate relationships, degrons, and protein lifetime. Intraorganellar proteolysis is complemented by autophagy of whole organelles or selected organellar content, as well as by cytosolic protein ubiquitination and degradation by the proteasome. This review summarizes (putative) plant organellar protease functions and substrate-protease relationships. Examples illustrate key proteolytic events.

Engineering plastid genomes: methods, tools, and applications in basic research and biotechnology

The small bacterial-type genome of the plastid (chloroplast) can be engineered by genetic transformation, generating cells and plants with transgenic plastid genomes, also referred to as transplastomic plants. The transformation process relies on homologous recombination, thereby facilitating the site-specific alteration of endogenous plastid genes as well as the precisely targeted insertion of foreign genes into the plastid DNA. The technology has been used extensively to analyze chloroplast gene functions and study plastid gene expression at all levels in vivo. Over the years, a large toolbox has been assembled that is now nearly comparable to the techniques available for plant nuclear transformation and that has enabled new applications of transplastomic technology in basic and applied research. This review describes the state of the art in engineering the plastid genomes of algae and land plants (Embryophyta). It provides an overview of the existing tools for plastid genome engineering, discusses current technological limitations, and highlights selected applications that demonstrate the immense potential of chloroplast transformation in several key areas of plant biotechnology.

Transplastomic Nicotiana benthamiana plants expressing multiple defence genes encoding protease inhibitors and chitinase display broad-spectrum resistance against insects, pathogens and abiotic stresses

Plastid engineering provides several advantages for the next generation of transgenic technology, including the convenient use of transgene stacking and the generation of high expression levels of foreign proteins. With the goal of generating transplastomic plants with multiresistance against both phytopathogens and insects, a construct containing a monocistronic patterned gene stack was transformed into Nicotiana benthamiana plastids harbouring sweet potato sporamin, taro cystatin and chitinase from Paecilomyces javanicus. Transplastomic lines were screened and characterized by Southern/Northern/Western blot analysis for the confirmation of transgene integration and respective expression level. Immunogold localization analyses confirmed the high level of accumulation proteins that were specifically expressed in leaf and root plastids. Subsequent functional bioassays confirmed that the gene stacks conferred a high level of resistance against both insects and phytopathogens. Specifically, larva of Spodoptera litura and Spodoptera exigua either died or exhibited growth retardation after ingesting transplastomic plant leaves. In addition, the inhibitory effects on both leaf spot diseases caused by Alternaria alternata and soft rot disease caused by Pectobacterium carotovorum subsp. carotovorum were markedly observed. Moreover, tolerance to abiotic stresses such as salt/osmotic stress was highly enhanced. The results confirmed that the simultaneous expression of sporamin, cystatin and chitinase conferred a broad spectrum of resistance. Conversely, the expression of single transgenes was not capable of conferring such resistance. To the best of our knowledge, this is the first study to demonstrate an efficacious stacked combination of plastid-expressed defence genes which resulted in an engineered tolerance to various abiotic and biotic stresses.

Transgene-induced pleiotropic effects in transplastomic plants

Since the first demonstration of stable transgene integration in the plastid genome (plastome) of higher plants, plastid transformation has been used for a wide range of purposes, including basic studies as well as biotechnological applications, showing that transplastomic plants are an effective system to produce recombinant proteins. Compared to nuclear transformation, the main advantages of this technology are the high and stable production level of proteins as well as the natural containment of transgenes. To date, more than 100 transgenes have been successfully expressed in plant chloroplasts. In some cases, however, unintended pleiotropic effects on plant growth and physiology were shown in transplastomic plants. In this paper, we review such effects and discuss some of the technologies developed to overcome them.

Optimization of transplastomic production of hemicellulases in tobacco: effects of expression cassette configuration and tobacco cultivar used as production platform on recombinant protein yields

BACKGROUND

Chloroplast transformation in tobacco has been used extensively to produce recombinant proteins and enzymes. Chloroplast expression cassettes can be designed with different configurations of the cis-acting elements that govern foreign gene expression. With the aim to optimize production of recombinant hemicellulases in transplastomic tobacco, we developed a set of cassettes that incorporate elements known to facilitate protein expression in chloroplasts and examined expression and accumulation of a bacterial xylanase XynA. Biomass production is another important factor in achieving sustainable and high-volume production of cellulolytic enzymes. Therefore, we compared productivity of two tobacco cultivars - a low-alkaloid and a high-biomass - as transplastomic expression platforms.

RESULTS

Four different cassettes expressing XynA produced various mutant phenotypes of the transplastomic plants, affected their growth rate and resulted in different accumulation levels of the XynA enzyme. The most productive cassette was identified and used further to express XynA and two additional fungal xylanases, Xyn10A and Xyn11B, in a high-biomass tobacco cultivar. The high biomass cultivar allowed for a 60% increase in XynA production per plant. Accumulation of the fungal enzymes reached more than 10-fold higher levels than the bacterial enzyme, constituting up to 6% of the total soluble protein in the leaf tissue. Use of a well-characterized translational enhancer with the selected expression cassette revealed inconsistent effects on accumulation of the recombinant xylanases. Additionally, differences in the enzymatic activity of crude plant extracts measured in leaves of different age suggest presence of a specific xylanase inhibitor in the green leaf tissue.

CONCLUSION

Our results demonstrate the pivotal importance of the expression cassette design and appropriate tobacco cultivar for high-level transplastomic production of recombinant proteins.

Chloroplast transformation for engineering of photosynthesis

Many efforts are underway to engineer improvements in photosynthesis to meet the challenges of increasing demands for food and fuel in rapidly changing environmental conditions. Various transgenes have been introduced into either the nuclear or plastid genomes in attempts to increase photosynthetic efficiency. We examine the current knowledge of the critical features that affect levels of expression of plastid transgenes and protein accumulation in transplastomic plants, such as promoters, 5' and 3' untranslated regions, RNA-processing sites, translation signals and amino acid sequences that affect protein turnover. We review the prior attempts to manipulate the properties of ribulose-1,5-bisphosphate carboxylase oxygenase (Rubisco) through plastid transformation. We illustrate how plastid operons could be created for expression of the multiple genes needed to introduce new pathways or enzymes to enhance photosynthetic rates or reduce photorespiration. We describe here the past accomplishments and future prospects for manipulating plant enzymes and pathways to enhance carbon assimilation through plastid transformation.

Plastid genetic engineering in Solanaceae

Plastid genetic engineering has come of age, becoming today an attractive alternative approach for the expression of foreign genes, as it offers several advantages over nuclear transformants. Significant progress has been made in plastid genetic engineering in tobacco and other Solanaceae plants, through the use of improved regeneration procedures and transformation vectors with efficient promoters and untranslated regions. Many genes encoding for industrially important proteins and vaccines, as well as genes conferring important agronomic traits, have been stably integrated and expressed in the plastid genome. Despite these advances, it remains a challenge to achieve marked levels of plastid transgene expression in non-green tissues. In this review, we summarize the basic requirements of plastid genetic engineering and discuss the current status, limitations, and the potential of plastid transformation for expanding future studies relating to Solanaceae plants.

Plastid expression of a double-pentameric vaccine candidate containing human papillomavirus-16 L1 antigen fused with LTB as adjuvant: transplastomic plants show pleiotropic phenotypes

Human papillomavirus (HPV) causes cervical cancer in women worldwide, which is currently prevented by vaccines based on virus-like particles (VLPs). However, these vaccines have certain limitations in their availability to developing countries, largely due to elevated costs. Concerning the highest burden of disease in resource-poor countries, development of an improved mucosal and cost-effective vaccine is a necessity. As an alternative to VLPs, capsomeres have been shown to be highly immunogenic and can be used as vaccine candidate. Furthermore, coupling of an adjuvant like Escherichia coli heat-labile enterotoxin subunit B (LTB) to an antigen can increase its immunogenicity and reduce the costs related to separate co-administration of adjuvants. Our study demonstrates the expression of two pentameric proteins: the modified HPV-16 L1 (L1_2xCysM) and LTB as a fusion protein in tobacco chloroplasts. Homoplasmy of the transplastomic plants was confirmed by Southern blotting. Western blot analysis showed that the LTB-L1 fusion protein was properly expressed in the plastids and the recombinant protein was estimated to accumulate up to 2% of total soluble protein. Proper folding and display of conformational epitopes for both LTB and L1 in the fusion protein was confirmed by GM1-ganglioside binding assay and antigen capture ELISA, respectively. However, all transplastomic lines showed chlorosis, male sterility and growth retardation, which persisted in the ensuing four generations studied. Nevertheless, plants reached maturity and produced seeds by pollination with wild-type plants. Taken together, these results pave the way for the possible development of a low-cost adjuvant-coupled vaccine with potentially improved immunogenicity against cervical cancer.

Engineering plastid fatty acid biosynthesis to improve food quality and biofuel production in higher plants

The ability to manipulate plant fatty acid biosynthesis by using new biotechnological approaches has allowed the production of transgenic plants with unusual fatty acid profile and increased oil content. This review focuses on the production of very long chain polyunsaturated fatty acids (VLCPUFAs) and the increase in oil content in plants using molecular biology tools. Evidences suggest that regular consumption of food rich in VLCPUFAs has multiple positive health benefits. Alternative sources of these nutritional fatty acids are found in cold-water fishes. However, fish stocks are in severe decline because of decades of overfishing, and also fish oils can be contaminated by the accumulation of toxic compounds. Recently, there is also an increase in oilseed use for the production of biofuels. This tendency is partly associated with the rapidly rising costs of petroleum, increased concern about the environmental impact of fossil oil and the attractive need to develop renewable sources of fuel. In contrast to this scenario, oil derived from crop plants is normally contaminant free and less environmentally aggressive. Genetic engineering of the plastid genome (plastome) offers a number of attractive advantages, including high-level foreign protein expression, marker-gene excision and transgene containment because of maternal inheritance of plastid genome in most crops. Here, we describe the possibility to improve fatty acid biosynthesis in plastids, production of new fatty acids and increase their content in plants by genetic engineering of plastid fatty acid biosynthesis via plastid transformation.

Detrimental effect of expression of Bt endotoxin Cry1Ac on in vitro regeneration, in vivo growth and development of tobacco and cotton transgenics

High levels of expression of the cry1Ac gene from Bacillus thuringiensis cannot be routinely achieved in transgenic plants despite modifications made in the gene to improve its expression. This has been attributed to the instability of the transcript in a few reports. In the present study, based on the genetic transformation of cotton and tobacco, we show that the expression of the Cry1Ac endotoxin has detrimental effects on both the in vitro and in vivo growth and development of transgenic plants. A number of experiments on developing transgenics in cotton with different versions of cry1Ac gene showed that the majority of the plants did not express any Cry1Ac protein. Based on Southern blot analysis, it was also observed that a substantial number of lines did not contain the cry1Ac gene cassette although they contained the marker gene nptII. More significantly, all the lines that showed appreciable levels of expression were found to be phenotypically abnormal. Experiments on transformation of tobacco with different constructs expressing the cry1Ac gene showed that in vitro regeneration was inhibited by the encoded protein. Further, out of a total of 145 independent events generated with the different cry1Ac gene constructs in tobacco, only 21 showed expression of the Cry1Ac protein, confirming observations made in cotton that regenerants that express high levels of the Cry1Ac protein are selected against during regeneration of transformed events. This problem was circumvented by targeting the Cry1Ac protein to the chloroplast, which also significantly improved the expression of the protein.

Plant plastid engineering

Genetic material in plants is distributed into nucleus, plastids and mitochondria. Plastid has a central role of carrying out photosynthesis in plant cells. Plastid transformation is becoming more popular and an alternative to nuclear gene transformation because of various advantages like high protein levels, the feasibility of expressing multiple proteins from polycistronic mRNAs, and gene containment through the lack of pollen transmission. Recently, much progress in plastid engineering has been made. In addition to model plant tobacco, many transplastomic crop plants have been generated which possess higher resistance to biotic and abiotic stresses and molecular pharming. In this mini review, we will discuss the features of the plastid DNA and advantages of plastid transformation. We will also present some examples of transplastomic plants developed so far through plastid engineering, and the various applications of plastid transformation.

Overexpression of a natural chloroplast-encoded antisense RNA in tobacco destabilizes 5S rRNA and retards plant growth

BACKGROUND

The roles of non-coding RNAs in regulating gene expression have been extensively studied in both prokaryotes and eukaryotes, however few reports exist as to their roles in organellar gene regulation. Evidence for accumulation of natural antisense RNAs (asRNAs) in chloroplasts comes from the expressed sequence tag database and cDNA libraries, while functional data have been largely obtained from artificial asRNAs. In this study, we used Nicotiana tabacum to investigate the effect on sense strand transcripts of overexpressing a natural chloroplast asRNA, AS5, which is complementary to the region which encodes the 5S rRNA and tRNAArg.

RESULTS

AS5-overexpressing (AS5ox) plants obtained by chloroplast transformation exhibited slower growth and slightly pale green leaves. Analysis of AS5 transcripts revealed four distinct species in wild-type (WT) and AS5ox plants, and additional AS5ox-specific products. Of the corresponding sense strand transcripts, tRNAArg overaccumulated several-fold in transgenic plants whereas 5S rRNA was unaffected. However, run-on transcription showed that the 5S-trnR region was transcribed four-fold more in the AS5ox plants compared to WT, indicating that overexpression of AS5 was associated with decreased stability of 5S rRNA. In addition, polysome analysis of the transformants showed less 5S rRNA and rbcL mRNA associated with ribosomes.

CONCLUSIONS

Our results suggest that AS5 can modulate 5S rRNA levels, giving it the potential to affect Chloroplast translation and plant growth. More globally, overexpression of asRNAs via chloroplast transformation may be a useful strategy for defining their functions.

Advances in chloroplast engineering

The chloroplast is a pivotal organelle in plant cells and eukaryotic algae to carry out photosynthesis, which provides the primary source of the world's food. The expression of foreign genes in chloroplasts offers several advantages over their expression in the nucleus: high-level expression, transgene stacking in operons and a lack of epigenetic interference allowing stable transgene expression. In addition, transgenic chloroplasts are generally not transmitted through pollen grains because of the cytoplasmic localization. In the past two decades, great progress in chloroplast engineering has been made. In this paper, we review and highlight recent studies of chloroplast engineering, including chloroplast transformation procedures, controlled expression of plastid transgenes in plants, the expression of foreign genes for improvement of plant traits, the production of biopharmaceuticals, metabolic pathway engineering in plants, plastid transformation to study RNA editing, and marker gene excision system.

Extensive homologous recombination between introduced and native regulatory plastid DNA elements in transplastomic plants

Homologous recombination within plastids directs plastid genome transformation for foreign gene expression and study of plastid gene function. Though transgenes are generally efficiently targeted to their desired insertion site, unintended homologous recombination events have been observed during plastid transformation. To understand the nature and abundance of these recombination events, we analyzed transplastomic tobacco lines derived from three different plastid transformation vectors utilizing two different loci for foreign gene insertion. Two unintended recombinant plastid DNA species were formed from each regulatory plastid DNA element included in the transformation vector. Some of these recombinant DNA species accumulated to as much as 10-60% of the amount of the desired integrated transgenic sequence in T0 plants. Some of the recombinant DNA species undergo further, "secondary" recombination events, resulting in an even greater number of recombinant plastid DNA species. The abundance of novel recombinant DNA species was higher in T0 plants than in T1 progeny, indicating that the ancillary recombination events described here may have the greatest impact during selection and regeneration of transformants. A line of transplastomic tobacco was identified containing an antibiotic resistance gene unlinked from the intended transgene insertion as a result of an unintended recombination event, indicating that the homologous recombination events described here may hinder efficient recovery of plastid transformants containing the desired transgene.

Expression of Acidothermus cellulolyticus E1 endo-beta-1,4-glucanase catalytic domain in transplastomic tobacco

As part of an effort to develop transgenic plants as a system for the production of lignocellulose-degrading enzymes, we evaluated the production of the endo-beta-1,4-glucanase E1 catalytic domain (E1cd) of Acidothermus cellulolyticus in transplastomic tobacco. In an attempt to increase the translation efficiency of the E1cd cassette, various lengths of the N-terminus of the psbA gene product were fused to the E1cd protein. The psbA gene of the plastid genome encodes the D1 polypeptide of photosystem II and is known to encode an efficiently translated mRNA. Experiments in an Escherichia coli expression system indicated that the fusion of short (10-22 amino acid) segments of D1 to E1cd resulted in modest increases in E1cd abundance and were compatible with E1cd activity. Plastid expression cassettes encoding unmodified E1cd and a 10-amino-acid D1 fusion (10nE1cd) were used to generate transplastomic tobacco plants. Expression of the E1cd open reading frame in transplastomic tobacco resulted in very low levels of the enzyme. The transplastomic plants accumulated a high level of E1cd mRNA, however, indicating that post-transcriptional processes were probably limiting the production of recombinant protein. The accumulation of 10nE1cd in transplastomic tobacco was approximately 200-fold higher than that of unmodified E1cd, yielding 10nE1cd in excess of 12% of total soluble protein in the extracts of the lower leaves. Most importantly, the active recombinant enzyme was recovered very easily and efficiently from dried plant material and constituted as much as 0.3% of the dry weight of leaf tissue.

Plant physiological adaptations to the massive foreign protein synthesis occurring in recombinant chloroplasts

Genetically engineered chloroplasts have an extraordinary capacity to accumulate recombinant proteins. We have investigated in tobacco (Nicotiana tabacum) the possible consequences of such additional products on several parameters of plant development and composition. Plastid transformants were analyzed that express abundantly either bacterial enzymes, alkaline phosphatase (PhoA-S and PhoA-L) and 4-hydroxyphenyl pyruvate dioxygenase (HPPD), or a green fluorescent protein (GFP). In leaves, the HPPD and GFP recombinant proteins are the major polypeptides and accumulate to higher levels than Rubisco. Nevertheless, these engineered metabolic sinks do not cause a measurable difference in growth rate or photosynthetic parameters. The total amino acid content of transgenic leaves is also not significantly affected, showing that plant cells have a limited protein biosynthetic capacity. Recombinant products are made at the expense of resident proteins. Rubisco, which constitutes the major leaf amino acid store, is the most clearly and strongly down-regulated plant protein. This reduction is even more dramatic under conditions of limited nitrogen supply, whereas recombinant proteins accumulate to even higher relative levels. These changes are regulated posttranscriptionally since transcript levels of resident plastid genes are not affected. Our results show that plants are able to produce massive amounts of recombinant proteins in chloroplasts without profound metabolic perturbation and that Rubisco, acting as a nitrogen buffer, is a key player in maintaining homeostasis and limiting pleiotropic effects.

Next generation synthetic vectors for transformation of the plastid genome of higher plants

Plastid transformation vectors are E. coli plasmids carrying a plastid marker gene for selection, adjacent cloning sites and flanking plastid DNA to target insertions in the plastid genome by homologous recombination. We report here on a family of next generation plastid vectors carrying synthetic DNA vector arms targeting insertions in the rbcL-accD intergenic region of the tobacco (Nicotiana tabacum) plastid genome. The pSS22 plasmid carries only synthetic vector arms from which the undesirable restriction sites have been removed by point mutations. The pSS24 vector carries a c-Myc tagged spectinomycin resistance (aadA) marker gene whereas in vector pSS30 aadA is flanked with loxP sequences for post-transformation marker excision. The synthetic vectors will enable direct manipulation of passenger genes in the transformation vector targeting insertions in the rbcL-accD intergenic region that contains many commonly used restriction sites.

High-level bacterial cellulase accumulation in chloroplast-transformed tobacco mediated by downstream box fusions

The Thermobifida fusca cel6A gene encoding an endoglucanase was fused to three different downstream box (DB) regions to generate cel6A genes with 14 amino acid fusions. The DB-Cel6A fusions were inserted into the tobacco (Nicotiana tabacum cv. Samsun) chloroplast genome for protein expression. Accumulation of Cel6A protein in transformed tobacco leaves varied over approximately two orders of magnitude, dependent on the identity of the DB region fused to the cel6A open reading frame (ORF). Additionally, the DB region fused to the cel6A ORF affected the accumulation of Cel6A protein in aging leaves, with the most effective DB regions allowing for high level accumulation of Cel6A protein in young, mature, and old leaves, while Cel6A protein accumulation decreased with leaf age when less effective DB regions were fused to the cel6A ORF. In the most highly expressed DB-Cel6A construct, enzymatically active Cel6A protein accumulated at up to 10.7% of total soluble leaf protein (%TSP). The strategy used for high-level endoglucanase expression may be useful for expression of other cellulolytic enzymes in chloroplasts, ultimately leading to cost-effective heterologous enzyme production for cellulosic ethanol using transplastomic plants.

Spontaneous capture of oilseed rape (Brassica napus) chloroplasts by wild B. rapa: implications for the use of chloroplast transformation for biocontainment

Environmental concerns over the cultivation of Genetically Modified (GM) crops largely centre on the ecological consequences following gene flow to wild relatives. One attractive solution is to deploy biocontainment measures that prevent hybridization. Chloroplast transformation is the most advanced biocontainment method but is compromised by chloroplast capture (hybridization through the maternal lineage). To date, however, there is a paucity of information on the frequency of chloroplast capture in the wild. Oilseed rape (Brassica napus, AACC) frequently hybridises with wild Brassica rapa (AA, as paternal parent) and yields B. rapa-like introgressed individuals after only two generations. In this study we used chloroplast CAPS markers that differentiate between the two species to survey wild and weedy populations of B. rapa for the capture of B. napus chloroplasts. A total of 464 B. rapa plants belonging to 14 populations growing either in close proximity to B. napus (i.e. sympatric <5 m) or else were allopatric from the crop (>1 km) were assessed for chloroplast capture using PCR (trnL-F) and CAPS (trnT-L-Xba I) markers. The screen revealed that two sympatric B. rapa populations included 53 plants that possessed the chloroplast of B. napus. In order to discount these B. rapa plants as F(1) crop-wild hybrids, we used a C-genome-specific marker and found that 45 out of 53 plants lacked the C-genome and so were at least second generation introgressants. The most plausible explanation is that these individuals represent multiple cases of chloroplast capture following introgressive hybridisation through the female germ line from the crop. The abundance of such plants in sympatric sites thereby questions whether the use of chloroplast transformation would provide a sufficient biocontainment for GM oilseed rape in the United Kingdom.

Expression of a Bacillus thuringiensis toxin (cry1Ab) gene in cabbage (Brassica oleracea L. var. capitata L.) chloroplasts confers high insecticidal efficacy against Plutella xylostella

Chloroplast genetic engineering is an environmentally friendly approach, where the foreign integrated gene is often expressed at a higher level than nuclear transformation. The cry1Ab gene was successfully transferred into the cabbage chloroplast genome in this study. The aadA and cry1Ab genes were inserted into the pASCC201 vector and driven by the prrn promoter. The cabbage-specific plastid vectors were transferred into the chloroplasts of cabbage via particle gun mediated transformation. Regenerated plantlets were selected by their resistance to spectinomycin and streptomycin. According to antibiotic selection, the regeneration percentage of the two cabbage cultivars was 4-5%. The results of PCR, Southern, Northern hybridization and western analyses indicated that the aadA and cry1Ab genes were not only successfully integrated into the chloroplast genome, but functionally expressed at the mRNA and protein level. Expression of Cry1Ab protein was detected in the range of 4.8-11.1% of total soluble protein in transgenic mature leaves of the two species. Insecticidal effects on Plutella xylostella were also demonstrated in cry1Ab transformed cabbage. The objectives of this study were to establish a gene transformation system for Brassica chloroplasts, and to study the possibility for insect-resistance in dicot vegetables using chloroplast gene transformation.

A protocol for expression of foreign genes in chloroplasts

Several major costs associated with the production of biopharmaceuticals or vaccines in fermentation-based systems could be minimized by using plant chloroplasts as bioreactors, which facilitates rapid scale-up. Oral delivery of chloroplast-derived therapeutic proteins through plant cells eliminates expensive purification steps, low temperature storage, transportation and sterile injections for their delivery. Chloroplast transformation technology (CTT) has also been successfully used to engineer valuable agronomic traits and for the production of industrial enzymes and biomaterials. Here, we provide a detailed protocol for the construction of chloroplast expression and integration vectors, selection and regeneration of transformants, evaluation of transgene integration and inheritance, confirmation of transgene expression and extraction, and quantitation and purification of foreign proteins. Integration of appropriate transgenes into chloroplast genomes and the resulting high levels of functional protein expression can be achieved in approximately 6 months in lettuce and tobacco. CTT is eco-friendly because transgenes are maternally inherited in most crop plants.

Identification of a plastid intercistronic expression element (IEE) facilitating the expression of stable translatable monocistronic mRNAs from operons

Most plastid genes are part of operons and expressed as polycistronic mRNAs. Many primary polycistronic transcripts undergo post-transcriptional processing in monocistronic or oligocistronic units. At least some polycistronic transcripts are not translatable, and endonucleolytic processing may therefore be a prerequisite for translation to occur. As the requirements for intercistronic mRNA processing into stable monocistronic transcript are not well understood, we have sought to define minimum sequence elements that trigger processing and thus are capable of generating stable translatable monocistronic mRNAs. We describe here the in vivo identification of a small intercistronic expression element that mediates intercistronic cleavage into stable monocistronic transcripts. Separation of foreign genes by this element facilitates transgene stacking in operons, and thus will help to expand the range of applications of transplastomic technology.

A guide to choosing vectors for transformation of the plastid genome of higher plants

Plastid transformation, originally developed in tobacco (Nicotiana tabacum), has recently been extended to a number of crop species enabling in vivo probing of plastid function and biotechnological applications. In this article we report new plastid vectors that enable insertion of transgenes in the inverted repeat region of the plastome between the trnV and 3'rps12 or trnI and trnA genes. Efficient recovery of transplastomic clones is ensured by selection for spectinomycin (aadA) or kanamycin (neo) resistance genes. Expression of marker genes can be verified using commercial antibodies that detect the accumulation of neomycin phosphotranseferase II, the neo gene product, or the C-terminal c-myc tag of aminoglycoside-3''-adenylytransferase, encoded by the aadA gene. Aminoglycoside-3''-adenylytransferase, the spectinomycin inactivating enzyme, is translationally fused with green fluorescent protein in two vectors so that transplastomic clones can be selected by spectinomycin resistance and visually identified by fluorescence in ultraviolet light. The marker genes in the new vectors are flanked by target sites for Cre or Int, the P1 and phiC31 phage site-specific recombinases. When uniform transformation of all plastid genomes is obtained, the marker genes can be excised by Cre or Int expressed from a nuclear gene. Choice of expression signals for the gene of interest, complications caused by the presence of plastid DNA sequences recognized by Cre, and loss of transgenes by homologous recombination via duplicated sequences are also discussed to facilitate a rational choice from among the existing vectors and to aid with new target-specific vector designs.