Updates on industrial production of amino acids using Corynebacterium glutamicum

The murein endopeptidase MepA regulated by MtrAB and MprAB participate in cell wall homeostasis

The complete genome of Corynebacterium glutamicum contain a gene encoding murein endopeptidase MepA which maintain cell wall homeostasis by regulating peptidoglycan biosynthesis. In this study, we investigate the physiological function, localization and regulator of MepA. The result shows that mepA overexpression lead to peptidoglycan degradation and the defects in cell division. MepA-EGFP was shown to localizes exclusively at the cell cell septum. In addition, mepA overexpression increased cell permeability and reduced the resistance of cells to isoniazid, an antibiotic used to treat Mycobacterium tuberculosis infection. Furthermore, transcription analysis showed that mepA affected cell division and membrane transport pathways, and was coordinately regulated by the two-component systems MtrAB and MprAB(CgtS/R2).

Developing a High-Umami, Low-Salt Soy Sauce through Accelerated Moromi Fermentation with Corynebacterium and Lactiplantibacillus Strains

The traditional fermentation process of soy sauce employs a hyperhaline model and has a long fermentation period. A hyperhaline model can improve fermentation speed, but easily leads to the contamination of miscellaneous bacteria and fermentation failure. In this study, after the conventional koji and moromi fermentation, the fermentation broth was pasteurized and diluted, and then inoculated with three selected microorganisms including Corynebacterium glutamicum, Corynebacterium ammoniagenes, and Lactiplantibacillus plantarum for secondary fermentation. During this ten-day fermentation, the pH, free amino acids, organic acids, nucleotide acids, fatty acids, and volatile compounds were analyzed. The fermentation group inoculated with C. glutamicum accumulated the high content of amino acid nitrogen of 0.92 g/100 mL and glutamic acid of 509.4 mg/100 mL. The C. ammoniagenes group and L. plantarum group were rich in nucleotide and organic acid, respectively. The fermentation group inoculated with three microorganisms exhibited the best sensory attributes, showing the potential to develop a suitable fermentation method. The brewing speed of the proposed process in this study was faster than that of the traditional method, and the umami substances could be significantly accumulated in this low-salt fermented model (7% w/v NaCl). This study provides a reference for the low-salt and rapid fermentation of seasoning.

Rapid Analysis of Trace Amounts of Amino Acid Derivatives by a Formyl Group-Installed Crystalline Sponge

The Industries need techniques for the rapid structure analysis of amino acid derivatives. The amino acid derivatives are sometimes produced as impurities in the industrial production processes, and cause toxicity problems. Herein, we report the crystalline sponge (CS) method analysis of variety of amino acids using a formyl group installed CS crystal. Most amino acids possess a primary amino group, which can form Schiff-base with the formyl group under mild conditions. Thus, the formyl group installed CS crystal can efficiently capture the amino acids via Schiff-base formation. We successfully analyzed derivatives of 18 proteogenic amino acids, 6 non-proteogenic amino acids, and 4 dipeptides using the formyl group installed CS. We thus believe that the protocols shown in this study would serve the need of the industries.

Probiotics in Postoperative Pain Management

Postoperative pain is the unpleasant sensory and emotional experience after surgery, its origin being both the inflammatory reaction induced by the surgical trauma on the abdominal wall and the splanchnic pain induced by the activation of nociceptors of the viscera, which are highly sensitive to distension, ischemia, and inflammation. Nowadays, it is well recognized that there is a close relationship between the gut microbiome and pain perception, and that microbiome is highly affected by both anesthesia and surgical manipulation. Thus, efforts to restore the disturbed microbiome via supplementation with beneficial bacteria, namely probiotics, seem to be effective. In this article, the knowledge gained mainly from experimental research on this topic is analyzed, the concluding message being that each probiotic strain works in its own way towards pain relief.

Preparation of three structurally similar stationary phases with different ionizable terminal groups and evaluation of their retention performances under multiple modes in high performance liquid chromatography

Three structurally similar silane reagents with different terminal groups were prepared and bonded to silica to obtain three structurally similar stationary phases (Sil-Ph-COOH, Sil-Phe and Sil-Ph-NH2). The prepared stationary phases were characterized through elemental analysis (EA) and Fourier Transform Infrared Spectroscopy (FT-IR). These three stationary phases provided acceptable retention repeatability (relative standard deviations between 0.08% and 0.13%) and high column efficiency (7.3 × 104 plates/m for uridine on Sil-Phe). The retention behavior of the three columns was investigated under different chromatographic conditions including different mobile phase ratio, salt concentration, pH etc. The retention mechanisms were explored by linear solvation energy relationships and Van't Hoff plots. Applications in separation under reversed phase liquid chromatography (RPLC), hydrophilic interaction liquid chromatography (HILIC) and ion exchange chromatography (IEC) mode were investigated. The results showed that the retention capacity of the stationary phases with different terminal groups to the analytes is very different, especially for carboxylic acids, because the surface charges of amino groups and carboxyl groups under weakly acidic conditions produce different electrostatic effects with dissociated carboxylic acids. Finally, the Sil-Phe column was employed to detect ibuprofen extracted from pharmaceutical ibuprofen capsules and vitamins extracted from vitamin tablets.

Cellular localization of the hybrid pyruvate/2-oxoglutarate dehydrogenase complex in the actinobacterium Corynebacterium glutamicum

For many bacterial proteins, specific localizations within the cell have been demonstrated, but enzymes involved in central metabolism are usually considered to be homogenously distributed within the cytoplasm. Here, we provide an example for a spatially defined localization of a unique enzyme complex found in actinobacteria, the hybrid pyruvate/2-oxoglutarate dehydrogenase complex (PDH-ODH). In non-actinobacterial cells, PDH and ODH form separate multienzyme complexes of megadalton size composed of three different subunits, E1, E2, and E3. The actinobacterial PDH-ODH complex is composed of four subunits, AceE (E1p), AceF (E2p), Lpd (E3), and OdhA (E1oE2o). Using fluorescence microscopy, we observed that in Corynebacterium glutamicum, all four subunits are co-localized in distinct spots at the cell poles, and in larger cells, additional spots are present at mid-cell. These results further confirm the existence of the hybrid complex. The unphosporylated OdhI protein, which binds to OdhA and inhibits ODH activity, was co-localized with OdhA at the poles, whereas phosphorylated OdhI, which does not bind OdhA, was distributed in the entire cytoplasm. Isocitrate dehydrogenase and glutamate dehydrogenase, both metabolically linked to ODH, were evenly distributed in the cytoplasm. Based on the available structural data for individual PDH-ODH subunits, a novel supramolecular architecture of the hybrid complex differing from classical PDH and ODH complexes has to be postulated. Our results suggest that localization at the poles or at mid-cell is most likely caused by nucleoid exclusion and results in a spatially organized metabolism in actinobacteria, with consequences yet to be studied. IMPORTANCE Enzymes involved in the central metabolism of bacteria are usually considered to be distributed within the entire cytoplasm. Here, we provide an example for a spatially defined localization of a unique enzyme complex of actinobacteria, the hybrid pyruvate dehydrogenase/2-oxoglutarate dehydrogenase (PDH-ODH) complex composed of four different subunits. Using fusions with mVenus or mCherry and fluorescence microscopy, we show that all four subunits are co-localized in distinct spots at the cell poles, and in larger cells, additional spots were observed at mid-cell. These results clearly support the presence of the hybrid PDH-ODH complex and suggest a similar localization in other actinobacteria. The observation of a defined spatial localization of an enzyme complex catalyzing two key reactions of central metabolism poses questions regarding possible consequences for the availability of substrates and products within the cell and other bacterial enzyme complexes showing similar behavior.

Metabolic engineering of Corynebacterium glutamicum for the high-level production of valerolactam, a nylon-5 monomer

Valerolactam (VL) is an important precursor chemical for nylon-5 and nylon 6,5. It has been produced by petroleum-based route involving harsh reaction conditions and generating toxic wastes. Here, we report the complete biosynthesis of VL by metabolically engineered Corynebacterium glutamicum overproducing L-lysine. The pathway comprising L-lysine monooxygenase (davB) and 5-aminovaleramide amidohydrolase (davA) from Pseudomonas putida, and β-alanine CoA transferase (act) from Clostridium propionicum was introduced into the C. glutamicum GA16 strain. To increase the VL flux, competitive pathways predicted from sRNA knockdown target screening were deleted. This engineered C. glutamicum strain produced VL as a major product, but still secreted significant amount of its precursor, 5-aminovaleric acid (5AVA). To circumvent this problem, putative 5AVA transporter genes were screened and engineered in the genome, thereby reuptaking 5AVA excreted. Also, multiple copies of the act gene were integrated into the genome to strengthen the conversion of 5AVA to VL. The final VL10 (pVL1) strain was constructed by enhancing glucose uptake system, which produced 9.68 g/L of VL in flask culture. Fed-batch fermentation of the VL10 (pVL1) strain produced 76.1 g/L of VL from glucose with the yield and productivity of 0.28 g/g and 0.99 g/L/h, respectively, showcasing a high potential for bio-based production of VL from renewable resources.

A novel strategy for L-arginine production in engineered Escherichia coli

BACKGROUND

L-arginine is an important amino acid with applications in diverse industrial and pharmaceutical fields. N-acetylglutamate, synthesized from L-glutamate and acetyl-CoA, is a precursor of the L-arginine biosynthetic branch in microorganisms. The enzyme that produces N-acetylglutamate, N-acetylglutamate synthase, is allosterically inhibited by L-arginine. L-glutamate, as a central metabolite, provides carbon backbone for diverse biological compounds besides L-arginine. When glucose is the sole carbon source, the theoretical maximum carbon yield towards L-arginine is 96.7%, but the experimental highest yield was 51%. The gap of L-arginine yield indicates the regulation complexity of carbon flux and energy during the L-arginine biosynthesis. Besides endogenous biosynthesis, N-acetylglutamate, the key precursor of L-arginine, can be obtained by chemical acylation of L-glutamate with a high yield of 98%. To achieve high-yield production of L-arginine, we demonstrated a novel approach by directly feeding precursor N-acetylglutamate to engineered Escherichia coli.

RESULTS

We reported a new approach for the high yield of L-arginine production in E. coli. Gene argA encoding N-acetylglutamate synthase was deleted to disable endogenous biosynthesis of N-acetylglutamate. The feasibility of external N-acetylglutamate towards L-arginine was verified via growth assay in argA- strain. To improve L-arginine production, astA encoding arginine N-succinyltransferase, speF encoding ornithine decarboxylase, speB encoding agmatinase, and argR encoding an arginine responsive repressor protein were disrupted. Based on overexpression of argDGI, argCBH operons, encoding enzymes of the L-arginine biosynthetic pathway, ~ 4 g/L L-arginine was produced in shake flask fermentation, resulting in a yield of 0.99 mol L-arginine/mol N-acetylglutamate. This strain was further engineered for the co-production of L-arginine and pyruvate by removing genes adhE, ldhA, poxB, pflB, and aceE, encoding enzymes involved in the conversion and degradation of pyruvate. The resulting strain was shown to produce 4 g/L L-arginine and 11.3 g/L pyruvate in shake flask fermentation.

CONCLUSIONS

Here, we developed a novel approach to avoid the strict regulation of L-arginine on ArgA and overcome the metabolism complexity in the L-arginine biosynthesis pathway. We achieve a high yield of L-arginine production from N-acetylglutamate in E. coli. Co-production pyruvate and L-arginine was used as an example to increase the utilization of input carbon sources.

Structural and functional diversity of bacterial cyclic nucleotide perception by CRP proteins

Cyclic AMP (cAMP) is a ubiquitous second messenger synthesized by most living organisms. In bacteria, it plays highly diverse roles in metabolism, host colonization, motility, and many other processes important for optimal fitness. The main route of cAMP perception is through transcription factors from the diverse and versatile CRP-FNR protein superfamily. Since the discovery of the very first CRP protein CAP in Escherichia coli more than four decades ago, its homologs have been characterized in both closely related and distant bacterial species. The cAMP-mediated gene activation for carbon catabolism by a CRP protein in the absence of glucose seems to be restricted to E. coli and its close relatives. In other phyla, the regulatory targets are more diverse. In addition to cAMP, cGMP has recently been identified as a ligand of certain CRP proteins. In a CRP dimer, each of the two cyclic nucleotide molecules makes contacts with both protein subunits and effectuates a conformational change that favors DNA binding. Here, we summarize the current knowledge on structural and physiological aspects of E. coli CAP compared with other cAMP- and cGMP-activated transcription factors, and point to emerging trends in metabolic regulation related to lysine modification and membrane association of CRP proteins.

Cyanobacteria as cell factories for the photosynthetic production of sucrose

Biofuels and other biologically manufactured sustainable goods are growing in popularity and demand. Carbohydrate feedstocks required for industrial fermentation processes have traditionally been supplied by plant biomass, but the large quantities required to produce replacement commodity products may prevent the long-term feasibility of this approach without alternative strategies to produce sugar feedstocks. Cyanobacteria are under consideration as potential candidates for sustainable production of carbohydrate feedstocks, with potentially lower land and water requirements relative to plants. Several cyanobacterial strains have been genetically engineered to export significant quantities of sugars, especially sucrose. Sucrose is not only naturally synthesized and accumulated by cyanobacteria as a compatible solute to tolerate high salt environments, but also an easily fermentable disaccharide used by many heterotrophic bacteria as a carbon source. In this review, we provide a comprehensive summary of the current knowledge of the endogenous cyanobacterial sucrose synthesis and degradation pathways. We also summarize genetic modifications that have been found to increase sucrose production and secretion. Finally, we consider the current state of synthetic microbial consortia that rely on sugar-secreting cyanobacterial strains, which are co-cultivated alongside heterotrophic microbes able to directly convert the sugars into higher-value compounds (e.g., polyhydroxybutyrates, 3-hydroxypropionic acid, or dyes) in a single-pot reaction. We summarize recent advances reported in such cyanobacteria/heterotroph co-cultivation strategies and provide a perspective on future developments that are likely required to realize their bioindustrial potential.

Experimental kS estimation: A comparison of methods for Corynebacterium glutamicum from lab to microfluidic scale

Knowledge about the specific affinity of whole cells toward a substrate, commonly referred to as k_S , is a crucial parameter for characterizing growth within bioreactors. State-of-the-art methodologies measure either uptake or consumption rates at different initial substrate concentrations. Alternatively, cell dry weight or respiratory data like online oxygen and carbon dioxide transfer rates can be used to estimate k_S . In this work, a recently developed substrate-limited microfluidic single-cell cultivation (sl-MSCC) method is applied for the estimation of k_S values under defined environmental conditions. This method is benchmarked with two alternative microtiter plate methods, namely high-frequency biomass measurement (HFB) and substrate-limited respiratory activity monitoring (sl-RA). As a model system, the substrate affinity k_S of Corynebacterium glutamicum ATCC 13032 regarding glucose was investigated assuming a Monod-type growth response. A k_S of <70.7 mg/L (with 95% probability) with HFB, 8.55 ± 1.38 mg/L with sl-RA, and 2.66 ± 0.99 mg/L with sl-MSCC was obtained. Whereas HFB and sl-RA are suitable for a fast initial k_S estimation, sl-MSCC allows an affinity estimation by determining t_D at concentrations less or equal to the k_S value. Thus, sl-MSCC lays the foundation for strain-specific k_S estimations under defined environmental conditions with additional insights into cell-to-cell heterogeneity.

Biosystem design of Corynebacterium glutamicum for bioproduction

Corynebacterium glutamicum, a natural glutamate-producing bacterium adopted for industrial production of amino acids, has been extensively explored recently for high-level biosynthesis of amino acid derivatives, bulk chemicals such as organic acids and short-chain alcohols, aromatics, and natural products, including polyphenols and terpenoids. Here, we review the recent advances with a focus on biosystem design principles, metabolic characterization and modeling, omics analysis, utilization of nonmodel feedstock, emerging CRISPR (Clustered Regularly Interspaced Short Palindromic Repeats) tools for Corynebacterium strain engineering, biosensors, and novel strains of C. glutamicum. Future research directions for developing C. glutamicum cell factories are also discussed.

C-di-AMP Is a Second Messenger in Corynebacterium glutamicum That Regulates Expression of a Cell Wall-Related Peptidase via a Riboswitch

Cyclic di-adenosine monophosphate (c-di-AMP) is a bacterial second messenger discovered in Bacillus subtilis and involved in potassium homeostasis, cell wall maintenance and/or DNA stress response. As the role of c-di-AMP has been mostly studied in Firmicutes, we sought to increase the understanding of its role in Actinobacteria, namely in Corynebacterium glutamicum. This organism is a well-known industrial production host and a model organism for pathogens, such as C. diphtheriae or Mycobacterium tuberculosis. Here, we identify and analyze the minimal set of two C. glutamicum enzymes, the diadenylate cyclase DisA and the phosphodiesterase PdeA, responsible for c-di-AMP metabolism. DisA synthesizes c-di-AMP from two molecules of ATP, whereas PdeA degrades c-di-AMP, as well as the linear degradation intermediate phosphoadenylyl-(3'→5')-adenosine (pApA) to two molecules of AMP. Here, we show that a ydaO/kimA-type c-di-AMP-dependent riboswitch controls the expression of the strictly regulated cell wall peptidase gene nlpC in C. glutamicum. In contrast to previously described members of the ydaO/kimA-type riboswitches, our results suggest that the C. glutamicum nlpC riboswitch likely affects the translation instead of the transcription of its downstream gene. Although strongly regulated by different mechanisms, we show that the absence of nlpC, the first known regulatory target of c-di-AMP in C. glutamicum, is not detrimental for this organism under the tested conditions.

Synthetic biology tools for engineering Corynebacterium glutamicum

Corynebacterium glutamicum is a promising organism for the industrial production of amino acids, fuels, and various value-added chemicals. From the whole genome sequence release, C. glutamicum has been valuable in the field of industrial microbiology and biotechnology. Continuous discovery of genetic manipulations and regulation mechanisms has developed C. glutamicum as a synthetic biology platform chassis. This review summarized diverse genomic manipulation technologies and gene expression tools for static, dynamic, and multiplex control at transcription and translation levels. Moreover, we discussed the current challenges and applicable tools to C. glutamicum for future advancements.

Characteristics of the GlnH and GlnX Signal Transduction Proteins Controlling PknG-Mediated Phosphorylation of OdhI and 2-Oxoglutarate Dehydrogenase Activity in Corynebacterium glutamicum

In Corynebacterium glutamicum the protein kinase PknG phosphorylates OdhI and thereby abolishes the inhibition of 2-oxoglutarate dehydrogenase activity by unphosphorylated OdhI. Our previous studies suggested that PknG activity is controlled by the periplasmic binding protein GlnH and the transmembrane protein GlnX, because ΔglnH and ΔglnX mutants showed a growth defect on glutamine similar to that of a ΔpknG mutant. We have now confirmed the involvement of GlnH and GlnX in the control of OdhI phosphorylation by analyzing the OdhI phosphorylation status and glutamate secretion in ΔglnH and ΔglnX mutants and by characterizing ΔglnX suppressor mutants. We provide evidence for GlnH being a lipoprotein and show by isothermal titration calorimetry that it binds l-aspartate and l-glutamate with moderate to low affinity, but not l-glutamine, l-asparagine, or 2-oxoglutarate. Based on a structural comparison with GlnH of Mycobacterium tuberculosis, two residues critical for the binding affinity were identified and verified. The predicted GlnX topology with four transmembrane segments and two periplasmic domains was confirmed by PhoA and LacZ fusions. A structural model of GlnX suggested that, with the exception of a poorly ordered N-terminal region, the entire protein is composed of α-helices and small loops or linkers, and it revealed similarities to other bacterial transmembrane receptors. Our results suggest that the GlnH-GlnX-PknG-OdhI-OdhA signal transduction cascade serves to adapt the flux of 2-oxoglutarate between ammonium assimilation via glutamate dehydrogenase and energy generation via the tricarboxylic acid (TCA) cycle to the availability of the amino group donors l-glutamate and l-aspartate in the environment. IMPORTANCE Actinobacteria comprise a large number of species playing important roles in biotechnology and medicine, such as Corynebacterium glutamicum, the major industrial amino acid producer, and Mycobacterium tuberculosis, the pathogen causing tuberculosis. Many actinobacteria use a signal transduction process in which the phosphorylation status of OdhI (corynebacteria) or GarA (mycobacteria) regulates the carbon flux at the 2-oxoglutarate node. Inhibition of 2-oxoglutarate dehydrogenase by unphosphorylated OdhI shifts the flux of 2-oxoglutarate from the TCA cycle toward glutamate formation and, thus, ammonium assimilation. Phosphorylation of OdhI/GarA is catalyzed by the protein kinase PknG, whose activity was proposed to be controlled by the periplasmic binding protein GlnH and the transmembrane protein GlnX. In this study, we combined genetic, biochemical, and structural modeling approaches to characterize GlnH and GlnX of C. glutamicum and confirm their roles in the GlnH-GlnX-PknG-OdhI-OdhA signal transduction cascade. These findings are relevant also to other Actinobacteria employing a similar control process.

Co-production of l-Lysine and Heterologous Squalene in CRISPR/dCas9-Assisted Corynebacterium glutamicum

Corynebacterium glutamicum is widely used for a large-scale industrial producer of feed additive amino acids, such as l-lysine. Moreover, C. glutamicum has been engineered for producing various non-native chemicals, including terpenes. For the first time, C. glutamicum was engineered for co-production of l-lysine and heterologous squalene. To control metabolic fluxes for either the l-lysine biosynthesis pathway or the squalene biosynthesis pathway, pyruvate, an intermediate in the central metabolism, a node was regulated by a clustered regularly interspaced short palindromic repeat (CRISPR) interference system. Repressing pyc encoding for pyruvate carboxylase in the l-lysine producer (DM1919) and its derivatives resulted in 99.24 ± 7.63 mg/L total squalene and 6.25 ± 0.20 g/L extracellular lysine at 120 h. Furthermore, various oil overlays were tested for efficient co-productions. In situ extraction with corn oil (10%, v/v) exhibited a separation of 99.75% (w/v) of total squalene (intra- and extracellular squalene), while l-lysine can be secreted in the medium. This co-production strategy will help a potential bioprocess of amino acid production with various terpenes.

The Role of the Human Microbiome in the Pathogenesis of Pain

Understanding of the gut microbiome's role in human physiology developed rapidly in recent years. Moreover, any alteration of this microenvironment could lead to a pathophysiological reaction of numerous organs. It results from the bidirectional communication of the gastrointestinal tract with the central nervous system, called the gut-brain axis. The signals in the gut-brain axis are mediated by immunological, hormonal, and neural pathways. However, it is also influenced by microorganisms in the gut. The disturbances in the gut-brain axis are associated with gastrointestinal syndromes, but recently their role in the development of different types of pain was reported. The gut microbiome could be the factor in the central sensitization of chronic pain by regulating microglia, astrocytes, and immune cells. Dysbiosis could lead to incorrect immune responses, resulting in the development of inflammatory pain such as endometriosis. Furthermore, chronic visceral pain, associated with functional gastrointestinal disorders, could result from a disruption in the gut microenvironment. Any alteration in the gut-brain axis could also trigger migraine attacks by affecting cytokine expression. Understanding the gut microbiome's role in pain pathophysiology leads to the development of analgetic therapies targeting microorganisms. Probiotics, FODMAP diet, and fecal microbiota transplantation are reported to be beneficial in treating visceral pain.

The soil bacterium, Corynebacterium glutamicum, from biosynthesis of value-added products to bioremediation: A master of many trades

Ever since its discovery in 1957, Corynebacterium glutamicum has become a well-established industrial strain and is known for its massive capability of producing various amino acids (like L-lysine and L-glutamate) and other value-added chemicals. With the rising demand for these bio-based products, the revelation of the whole genome sequences of the wild type strains, and the astounding advancements made in the fields of metabolic engineering and systems biology, our perspective of C. glutamicum has been revolutionized and has expanded our understanding of its strain development. With these advancements, a new era for C. glutamicum supremacy in the field of industrial biotechnology began. This led to remarkable progress in the enhancement of tailor-made over-producing strains and further development of the substrate spectrum of the bacterium, to easily accessible, economical, and renewable resources. C. glutamicum has also been metabolically engineered and used in the degradation/assimilation of highly toxic and ubiquitous environmental contaminant, arsenic, present in water or soil. Here, we review the history, current knowledge, progress, achievements, and future trends relating to the versatile metabolic factory, C. glutamicum. This review paper is devoted to C. glutamicum which is one of the leading industrial microbes, and one of the most promising and versatile candidates to be developed. It can be used not only as a platform microorganism to produce different value-added chemicals and recombinant proteins, but also as a tool for bioremediation, allowing to enhance specific properties, for example in situ bioremediation.

Improvement in L-ornithine production from mannitol via transcriptome-guided genetic engineering in Corynebacterium glutamicum

BACKGROUND

L-Ornithine is an important medicinal intermediate that is mainly produced by microbial fermentation using glucose as the substrate. To avoid competition with human food resources, there is an urgent need to explore alternative carbon sources for L-ornithine production. In a previous study, we constructed an engineered strain, Corynebacterium glutamicum MTL13, which produces 54.56 g/L of L-ornithine from mannitol. However, compared with the titers produced using glucose as a substrate, the results are insufficient, and further improvement is required.

RESULTS

In this study, comparative transcriptome profiling of MTL01 cultivated with glucose or mannitol was performed to identify novel targets for engineering L-ornithine-producing strains. Guided by the transcriptome profiling results, we modulated the expression of qsuR (encoding a LysR-type regulator QsuR), prpC (encoding 2-methylcitrate synthase PrpC), pdxR (encoding a MocR-type regulator PdxR), acnR (encoding a TetR-type transcriptional regulator AcnR), CGS9114_RS08985 (encoding a hypothetical protein), and CGS9114_RS09730 (encoding a TetR/AcrR family transcriptional regulator), thereby generating the engineered strain MTL25 that can produce L-ornithine at a titer of 93.6 g/L, representing a 71.6% increase as compared with the parent strain MTL13 and the highest L-ornithine titer reported so far for C. glutamicum.

CONCLUSIONS

This study provides novel indirect genetic targets for enhancing L-ornithine accumulation on mannitol and lays a solid foundation for the biosynthesis of L-ornithine from marine macroalgae, which is farmed globally as a promising alternative feedstock.

Designing Microbial Cell Factories for the Production of Chemicals

The sustainable production of chemicals from renewable, nonedible biomass has emerged as an essential alternative to address pressing environmental issues arising from our heavy dependence on fossil resources. Microbial cell factories are engineered microorganisms harboring biosynthetic pathways streamlined to produce chemicals of interests from renewable carbon sources. The biosynthetic pathways for the production of chemicals can be defined into three categories with reference to the microbial host selected for engineering: native-existing pathways, nonnative-existing pathways, and nonnative-created pathways. Recent trends in leveraging native-existing pathways, discovering nonnative-existing pathways, and designing de novo pathways (as nonnative-created pathways) are discussed in this Perspective. We highlight key approaches and successful case studies that exemplify these concepts. Once these pathways are designed and constructed in the microbial cell factory, systems metabolic engineering strategies can be used to improve the performance of the strain to meet industrial production standards. In the second part of the Perspective, current trends in design tools and strategies for systems metabolic engineering are discussed with an eye toward the future. Finally, we survey current and future challenges that need to be addressed to advance microbial cell factories for the sustainable production of chemicals.

Transcriptome profiles of high-lysine adaptation reveal insights into osmotic stress response in Corynebacterium glutamicum

Corynebacterium glutamicum has been widely and effectively used for fermentative production of l-lysine on an industrial scale. However, high-level accumulation of end products inevitably leads to osmotic stress and hinders further increase of l-lysine production. At present, the underlying mechanism by which C. glutamicum cells adapt to high-lysine-induced osmotic stress is still unclear. In this study, we conducted a comparative transcriptomic analysis by RNA-seq to determine gene expression profiles under different high-lysine stress conditions. The results indicated that the increased expression of some metabolic pathways such as sulfur metabolism and specific amino acid biosynthesis might offer favorable benefits for high-lysine adaptation. Functional assays of 18 representative differentially expressed genes showed that the enhanced expression of multiple candidate genes, especially grpE chaperon, conferred high-lysine stress tolerance in C. glutamicum. Moreover, DNA repair component MutT and energy-transducing NADH dehydrogenase Ndh were also found to be important for protecting cells against high-lysine-induced osmotic stress. Taken together, these aforementioned findings provide broader views of transcriptome profiles and promising candidate targets of C. glutamicum for the adaptation of high-lysine stress during fermentation.

Development of a novel platform for recombinant protein production in Corynebacterium glutamicum on ethanol

Corynebacterium glutamicum represents an emerging recombinant protein expression factory due to its ideal features for protein secretion, but its applicability is harmed by the lack of an autoinduction system with tight regulation and high yield. Here, we propose a new recombinant protein manufacturing platform that leverages ethanol as both a delayed carbon source and an inducer. First, we reanalysed the native inducible promoter P_ICL from the acetate uptake operon and found that its limited capacity is the result of the inadequate translation initial architecture. The two strategies of bicistronic design and ribozyme-based insulator can ensure the high activity of this promoter. Next, through transcriptional engineering that alters transcription factor binding sites (TFBSs) and the first transcribed sequence, the truncated promoter P_A256 with a dramatically higher transcription level was generated. When producing the superfolder green fluorescent protein (sfGFP) under 1% ethanol conditions, P_A256 exhibited substantially lower protein accumulation in prophase but an approximately 2.5-fold greater final yield than the strong promoter P_H36. This superior expression mode was further validated using two secreted proteins, camelid antibody fragment (VHH) and endoxylanase (XynA). Furthermore, utilizing CRISPRi technology, ethanol utilization blocking strains were created, and P_A256 was shown to be impaired in the phosphotransacetylase (PTA) knockdown strains, indicating that ethanol metabolism into the tricarboxylic acid cycle is required for P_A256 upregulation. Finally, this platform was applied to produce the “de novo design” protein NEO-2/15, and by introducing the N-propeptide of CspB, NEO-2/15 was effectively secreted with the accumulation 281 mg/L obtained after 24 h of shake-flask fermentation. To the best of our knowledge, this is the first report of NEO-2/15 secretory overexpression.

Improved the lipopeptide production of Bacillus amyloliquefaciens HM618 under co-culture with the recombinant Corynebacterium glutamicum producing high-level proline

The application of antibacterial lipopeptides is limited by high cost and low yield. Herein, the exogenous L-proline significantly improved lipopeptide production by Bacillus amyloliquefaciens HM618. A recombinant Corynebacterium glutamicum producing high levels of proline using genetically modifying proB and putA was used to establish consortium, to improve lipopeptide production of strain HM618. Compared to a pure culture, the levels of iturin A, fengycin, and surfactin in consortium reached 67.75, 39.32, and 37.25 mg L^-1, respectively, an increase of 3.19-, 2.05-, and 1.63-fold over that produced by co-cultures of B. amyloliquefaciens and recombinant C. glutamicum with normal medium. Commercial amylase and recombinant Pichia pastoris with a heterologous amylase gene were used to hydrolyze kitchen waste. A three-strain consortium with recombinant P. pastoris and C. glutamicum increased the lipopeptide production of strain HM618 in medium containing KW. This work provides new strategies to improve lipopeptide production by B. amyloliquefaciens.

Multiscale engineering of microbial cell factories: A step forward towards sustainable natural products industry

Microbial cell factories (bacteria and fungi) are the leading producers of beneficial natural products such as lycopene, carotene, herbal medicine, and biodiesel etc. These microorganisms are considered efficient due to their effective bioprocessing strategy (monoculture- and consortial-based approach) under distinct processing conditions. Meanwhile, the advancement in genetic and process optimization techniques leads to enhanced biosynthesis of natural products that are known functional ingredients with numerous applications in the food, cosmetic and medical industries. Natural consortia and monoculture thrive in nature in a small proportion, such as wastewater, food products, and soils. In similitude to natural consortia, it is possible to engineer artificial microbial consortia and program their behaviours via synthetic biology tools. Therefore, this review summarizes the optimization of genetic and physicochemical parameters of the microbial system for improved production of natural products. Also, this review presents a brief history of natural consortium and describes the functional properties of monocultures. This review focuses on synthetic biology tools that enable new approaches to design synthetic consortia; and highlights the syntropic interactions that determine the performance and stability of synthetic consortia. In particular, the effect of processing conditions and advanced genetic techniques to improve the productibility of both monoculture and consortial based systems have been greatly emphasized. In this context, possible strategies are also discussed to give an insight into microbial engineering for improved production of natural products in the future. In summary, it is concluded that the coupling of genomic modifications with optimum physicochemical factors would be promising for producing a robust microbial cell factory that shall contribute to the increased production of natural products.

Application of Corynebacterium glutamicum engineering display system in three generations of biorefinery

The fermentation production of platform chemicals in biorefineries is a sustainable alternative to the current petroleum refining process. The natural advantages of Corynebacterium glutamicum in carbon metabolism have led to C. glutamicum being used as a microbial cell factory that can use various biomass to produce value-added platform chemicals and polymers. In this review, we discussed the use of C. glutamicum surface display engineering bacteria in the three generations of biorefinery resources, and analyzed the C. glutamicum engineering display system in degradation, transport, and metabolic network reconstruction models. These engineering modifications show that the C. glutamicum engineering display system has great potential to become a cell refining factory based on sustainable biomass, and further optimizes the inherent properties of C. glutamicum as a whole-cell biocatalyst. This review will also provide a reference for the direction of future engineering transformation.

Genome Editing of Corynebacterium glutamicum Using CRISPR-Cpf1 System

Corynebacterium glutamicum, as an important microbial chassis, has great potential in industrial application. However, complicated genetic modification is severely slowed by lack of efficient genome editing tools. The Streptococcus pyogenes (Sp) CRISPR-Cas9 system has been verified as a very powerful tool for mediating genome alteration in many microorganisms but cannot work well in C. glutamicum. We recently developed two Francisella novicida (Fn) CRISPR-Cpf1 assisted systems for genome editing via homologous recombination in C. glutamicum. Here, we describe the protocols and demonstrated that N iterative rounds of genome editing can be achieved in 3 N + 4 or 3 N + 2 days, respectively.

High-Quality Genome-Scale Reconstruction of Corynebacterium glutamicum ATCC 13032

Corynebacterium glutamicum belongs to the microbes of enormous biotechnological relevance. In particular, its strain ATCC 13032 is a widely used producer of L-amino acids at an industrial scale. Its apparent robustness also turns it into a favorable platform host for a wide range of further compounds, mainly because of emerging bio-based economies. A deep understanding of the biochemical processes in C. glutamicum is essential for a sustainable enhancement of the microbe's productivity. Computational systems biology has the potential to provide a valuable basis for driving metabolic engineering and biotechnological advances, such as increased yields of healthy producer strains based on genome-scale metabolic models (GEMs). Advanced reconstruction pipelines are now available that facilitate the reconstruction of GEMs and support their manual curation. This article presents iCGB21FR, an updated and unified GEM of C. glutamicum ATCC 13032 with high quality regarding comprehensiveness and data standards, built with the latest modeling techniques and advanced reconstruction pipelines. It comprises 1042 metabolites, 1539 reactions, and 805 genes with detailed annotations and database cross-references. The model validation took place using different media and resulted in realistic growth rate predictions under aerobic and anaerobic conditions. The new GEM produces all canonical amino acids, and its phenotypic predictions are consistent with laboratory data. The in silico model proved fruitful in adding knowledge to the metabolism of C. glutamicum: iCGB21FR still produces L-glutamate with the knock-out of the enzyme pyruvate carboxylase, despite the common belief to be relevant for the amino acid's production. We conclude that integrating high standards into the reconstruction of GEMs facilitates replicating validated knowledge, closing knowledge gaps, and making it a useful basis for metabolic engineering. The model is freely available from BioModels Database under identifier MODEL2102050001.

Cyanophycin Modifications-Widening the Application Potential

A circular bioeconomy approach is essential to slowing down the fearsome ongoing climate change. Replacing polymers derived from fossil fuels with biodegradable biobased polymers is one crucial part of this strategy. Cyanophycin is a polymer consisting of amino acids produced by cyanobacteria with many potential applications. It consists mainly of aspartic acid and arginine, however, its composition may be changed at the production stage depending on the conditions of the polymerization reaction, as well as the characteristics of the enzyme cyanophycin synthetase, which is the key enzyme of catalysis. Cyanophycin synthetases from many sources were expressed heterologously in bacteria, yeast and plants aiming at high yields of the polymer or at introducing different amino acids into the structure. Furthermore, cyanophycin can be modified at the post-production level by chemical and enzymatic methods. In addition, cyanophycin can be combined with other compounds to yield hybrid materials. Although cyanophycin is an attractive polymer for industry, its usage as a sole material remains so far limited. Finding new variants of cyanophycin may bring this polymer closer to real-world applications. This short review summarizes all modifications of cyanophycin and its variants that have been reported within the literature until now, additionally addressing their potential applications.

Production of l-glutamate family amino acids in Corynebacterium glutamicum: Physiological mechanism, genetic modulation, and prospects

l-glutamate family amino acids (GFAAs), consisting of l-glutamate, l-arginine, l-citrulline, l-ornithine, l-proline, l-hydroxyproline, γ-aminobutyric acid, and 5-aminolevulinic acid, are widely applied in the food, pharmaceutical, cosmetic, and animal feed industries, accounting for billions of dollars of market activity. These GFAAs have many functions, including being protein constituents, maintaining the urea cycle, and providing precursors for the biosynthesis of pharmaceuticals. Currently, the production of GFAAs mainly depends on microbial fermentation using Corynebacterium glutamicum (including its related subspecies Corynebacterium crenatum), which is substantially engineered through multistep metabolic engineering strategies. This review systematically summarizes recent advances in the metabolic pathways, regulatory mechanisms, and metabolic engineering strategies for GFAA accumulation in C. glutamicum and C. crenatum, which provides insights into the recent progress in l-glutamate-derived chemical production.

Metabolic Engineering of Corynebacterium glutamicum for Production of UDP-N-Acetylglucosamine

Uridine diphosphate-N-acetylglucosamine (UDP-GlcNAc) is an acetylated amino sugar nucleotide that naturally serves as precursor in bacterial cell wall synthesis and is involved in prokaryotic and eukaryotic glycosylation reactions. UDP-GlcNAc finds application in various fields including the production of oligosaccharides and glycoproteins with therapeutic benefits. At present, nucleotide sugars are produced either chemically or in vitro by enzyme cascades. However, chemical synthesis is complex and non-economical, and in vitro synthesis requires costly substrates and often purified enzymes. A promising alternative is the microbial production of nucleotide sugars from cheap substrates. In this study, we aimed to engineer the non-pathogenic, Gram-positive soil bacterium Corynebacterium glutamicum as a host for UDP-GlcNAc production. The native glmS, glmU, and glmM genes and glmM of Escherichia coli, encoding the enzymes for UDP-GlcNAc synthesis from fructose-6-phosphate, were over-expressed in different combinations and from different plasmids in C. glutamicum GRS43, which lacks the glucosamine-6-phosphate deaminase gene (nagB) for glucosamine degradation. Over-expression of glmS, glmU and glmM, encoding glucosamine-6-phosphate synthase, the bifunctional glucosamine-1-phosphate acetyltransferase/N-acetyl glucosamine-1-phosphate uridyltransferase and phosphoglucosamine mutase, respectively, was confirmed using activity assays or immunoblot analysis. While the reference strain C. glutamicum GlcNCg1 with an empty plasmid in the exponential growth phase contained intracellularly only about 0.25 mM UDP-GlcNAc, the best engineered strain GlcNCg4 accumulated about 14 mM UDP-GlcNAc. The extracellular UDP-GlcNAc concentrations in the exponential growth phase did not exceed 2 mg/L. In the stationary phase, about 60 mg UDP-GlcNAc/L was observed extracellularly with strain GlcNCg4, indicating the potential of C. glutamicum to produce and to release the activated sugar into the culture medium. To our knowledge, the observed UDP-GlcNAc levels are the highest obtained with microbial hosts, emphasizing the potential of C. glutamicum as a suitable platform for activated sugar production.

Exploring the Potential of Corynebacterium glutamicum to Produce the Compatible Solute Mannosylglycerate

The compatible solute mannosylglycerate (MG) has exceptional properties in terms of protein stabilization and protection under salt, heat, and freeze-drying stresses as well as against protein aggregation. Due to these characteristics, MG possesses large potential for clinical and biotechnological applications. To achieve efficient MG production, Corynebacterium glutamicum was equipped with a bifunctional MG synthase (encoded by mgsD and catalyzing the condensation of 3-phosphoglycerate and GDP-mannose to MG) from Dehalococcoides mccartyi. The resulting strain C. glutamicum (pEKEx3 mgsD) intracellularly accumulated about 111 mM MG (60 ± 9 mg gCDW -1) with 2% glucose as a carbon source. To enable efficient mannose metabolization, the native manA gene, encoding mannose 6-phosphate isomerase, was overexpressed. Combined overexpression of manA and mgsD from two plasmids in C. glutamicum resulted in intracellular MG accumulation of up to ca. 329 mM [corresponding to 177 mg g cell dry weight (CDW) -1] with glucose, 314 mM (168 mg gCDW -1) with glucose plus mannose, and 328 mM (176 mg gCDW -1) with mannose as carbon source(s), respectively. The product was successfully extracted from cells by using a cold water shock, resulting in up to 5.5 mM MG (1.48 g L-1) in supernatants. The two-plasmid system was improved by integrating the mgsD gene into the manA-bearing plasmid and the resulting strain showed comparable production but faster growth. Repeated cycles of growth/production and extraction of MG in a bacterial milking-like experiment showed that cells could be recycled, which led to a cumulative MG production of 19.9 mM (5.34 g L-1). The results show that the newly constructed C. glutamicum strain produces MG from glucose and mannose and that a cold water shock enables extraction of MG from the cytosol into the medium.

DELEAT: gene essentiality prediction and deletion design for bacterial genome reduction

Background

The study of gene essentiality is fundamental to understand the basic principles of life, as well as for applications in many fields. In recent decades, dozens of sets of essential genes have been determined using different experimental and bioinformatics approaches, and this information has been useful for genome reduction of model organisms. Multiple in silico strategies have been developed to predict gene essentiality, but no optimal algorithm or set of gene features has been found yet, especially for non-model organisms with incomplete functional annotation.

Results

We have developed DELEAT v0.1 (DELetion design by Essentiality Analysis Tool), an easy-to-use bioinformatic tool which integrates an in silico gene essentiality classifier in a pipeline allowing automatic design of large-scale deletions in any bacterial genome. The essentiality classifier consists of a novel logistic regression model based on only six gene features which are not dependent on experimental data or functional annotation. As a proof of concept, we have applied this pipeline to the determination of dispensable regions in the genome of Bartonella quintana str. Toulouse. In this already reduced genome, 35 possible deletions have been delimited, spanning 29% of the genome.

Conclusions

Built on in silico gene essentiality predictions, we have developed an analysis pipeline which assists researchers throughout multiple stages of bacterial genome reduction projects, and created a novel classifier which is simple, fast, and universally applicable to any bacterial organism with a GenBank annotation file.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12859-021-04348-5.

Identification of Gip as a novel phage-encoded gyrase inhibitor protein of Corynebacterium glutamicum

By targeting key regulatory hubs of their host, bacteriophages represent a powerful source for the identification of novel antimicrobial proteins. Here, a screening of small cytoplasmic proteins encoded by the CGP3 prophage of Corynebacterium glutamicum resulted in the identification of the gyrase-inhibiting protein Cg1978, termed Gip. Pull-down assays and surface plasmon resonance revealed a direct interaction of Gip with the gyrase subunit A (GyrA). The inhibitory activity of Gip was shown to be specific to the DNA gyrase of its bacterial host C. glutamicum. Overproduction of Gip in C. glutamicum resulted in a severe growth defect as well as an induction of the SOS response. Furthermore, reporter assays revealed an RecA-independent induction of the cryptic CGP3 prophage, most likely caused by topological alterations. Overexpression of gip was counteracted by an increased expression of gyrAB and a reduction of topA expression at the same time, reflecting the homeostatic control of DNA topology. We postulate that the prophage-encoded Gip protein plays a role in modulating gyrase activity to enable efficient phage DNA replication. A detailed elucidation of the mechanism of action will provide novel directions for the design of drugs targeting DNA gyrase.

Advances in metabolic engineering of Corynebacterium glutamicum to produce high-value active ingredients for food, feed, human health, and well-being

The soil microbe Corynebacterium glutamicum is a leading workhorse in industrial biotechnology and has become famous for its power to synthetise amino acids and a range of bulk chemicals at high titre and yield. The product portfolio of the microbe is continuously expanding. Moreover, metabolically engineered strains of C. glutamicum produce more than 30 high value active ingredients, including signature molecules of raspberry, savoury, and orange flavours, sun blockers, anti-ageing sugars, and polymers for regenerative medicine. Herein, we highlight recent advances in engineering of the microbe into novel cell factories that overproduce these precious molecules from pioneering proofs-of-concept up to industrial productivity.

Metabolic engineering of Corynebacterium glutamicum for production of scyllo-inositol, a drug candidate against Alzheimer's disease

Scyllo-inositol has been identified as a potential drug for the treatment of Alzheimer's disease. Therefore, cost-efficient processes for the production of this compound are desirable. In this study, we analyzed and engineered Corynebacterium glutamicum with the aim to develop competitive scyllo-inositol producer strains. Initial studies revealed that C. glutamicum naturally produces scyllo-inositol when cultured with myo-inositol as carbon source. The conversion involves NAD⁺-dependent oxidation of myo-inositol to 2-keto-myo-inositol followed by NADPH-dependent reduction to scyllo-inositol. Use of myo-inositol for biomass formation was prevented by deletion of a cluster of 16 genes involved in myo-inositol catabolism (strain MB001(DE3)Δiol1). Deletion of a second cluster of four genes (oxiC-cg3390-oxiD-oxiE) related to inositol metabolism prevented conversion of 2-keto-myo-inositol to undesired products causing brown coloration (strain MB001(DE3)Δiol1Δiol2). The two chassis strains were used for plasmid-based overproduction of myo-inositol dehydrogenase (IolG) and scyllo-inositol dehydrogenase (IolW). In BHI medium containing glucose and myo-inositol, a complete conversion of the consumed myo-inositol into scyllo-inositol was achieved with the Δiol1Δiol2 strain. To enable scyllo-inositol production from cheap carbon sources, myo-inositol 1-phosphate synthase (Ino1) and myo-inositol 1-phosphatase (ImpA), which convert glucose 6-phosphate into myo-inositol, were overproduced in addition to IolG and IolW using plasmid pSI. Strain MB001(DE3)Δiol1Δiol2 (pSI) produced 1.8 g/L scyllo-inositol from 20 g/L glucose and even 4.4 g/L scyllo-inositol from 20 g/L sucrose within 72 h. Our results demonstrate that C. glutamicum is an attractive host for the biotechnological production of scyllo-inositol and potentially further myo-inositol-derived products.

Nonsterile l-Lysine Fermentation Using Engineered Phosphite-Grown Corynebacterium glutamicum

Fermentation using Corynebacterium glutamicum is an important method for the industrial production of amino acids. However, conventional fermentation processes using C. glutamicum are susceptible to microbial contamination and therefore require equipment sterilization or antibiotic dosing. To establish a more robust fermentation process, l-lysine-producing C. glutamicum was engineered to efficiently utilize xenobiotic phosphite (Pt) by optimizing the expression of Pt dehydrogenase in the exeR genome locus. This ability provided C. glutamicum with a competitive advantage over common contaminating microbes when grown on media containing Pt as a phosphorus source instead of phosphate. As a result, the engineered strain could produce 41.00 g/L l-lysine under nonsterile conditions during batch fermentation for 60 h, whereas the original strain required 72 h to produce 40.78 g/L l-lysine under sterile conditions. Therefore, the recombinant strain can efficiently produce l-lysine under nonsterilized conditions with unaffected production efficiency. Although this anticontamination strategy has been previously reported for other species, this is the first time it has been demonstrated in C. glutamicum; these findings should aid in the further development of cost-efficient amino acid fermentation processes.

Advances and Perspectives for Genome Editing Tools of Corynebacterium glutamicum

Corynebacterium glutamicum has been considered a promising synthetic biological platform for biomanufacturing and bioremediation. However, there are still some challenges in genetic manipulation of C. glutamicum. Recently, more and more genetic parts or elements (replicons, promoters, reporter genes, and selectable markers) have been mined, characterized, and applied. In addition, continuous improvement of classic molecular genetic manipulation techniques, such as allelic exchange via single/double-crossover, nuclease-mediated site-specific recombination, RecT-mediated single-chain recombination, actinophages integrase-mediated integration, and transposition mutation, has accelerated the molecular study of C. glutamicum. More importantly, emerging gene editing tools based on the CRISPR/Cas system is revolutionarily rewriting the pattern of genetic manipulation technology development for C. glutamicum, which made gene reprogramming, such as insertion, deletion, replacement, and point mutation, much more efficient and simpler. This review summarized the recent progress in molecular genetic manipulation technology development of C. glutamicum and discussed the bottlenecks and perspectives for future research of C. glutamicum as a distinctive microbial chassis.

Microbial production of ectoine and hydroxyectoine as high-value chemicals

Ectoine and hydroxyectoine as typical representatives of compatible solutes are not only essential for extremophiles to survive in extreme environments, but also widely used in cosmetic and medical industries. Ectoine was traditionally produced by Halomonas elongata through a "bacterial milking" process, of which the marked feature is using a high-salt medium to stimulate ectoine biosynthesis and then excreting ectoine into a low-salt medium by osmotic shock. The optimal hydroxyectoine production was achieved by optimizing the fermentation process of Halomonas salina. However, high-salinity broth exacerbates the corrosion to fermenters, and more importantly, brings a big challenge to the subsequent wastewater treatment. Therefore, increasing attention has been paid to reducing the salinity of the fermentation broth but without a sacrifice of ectoine/hydroxyectoine production. With the fast development of functional genomics and synthetic biology, quite a lot of progress on the bioproduction of ectoine/hydroxyectoine has been achieved in recent years. The importation and expression of an ectoine producing pathway in a non-halophilic chassis has so far achieved the highest titer of ectoine (~ 65 g/L), while rational flux-tuning of halophilic chassis represents a promising strategy for the next-generation of ectoine industrial production. However, efficient conversion of ectoine to hydroxyectoine, which could benefit from a clearer understanding of the ectoine hydroxylase, is still a challenge to date.

Engineering endogenous l-proline biosynthetic pathway to boost trans-4-hydroxy-l-proline production in Escherichia coli

Non-proteinogenic trans-4-hydroxy-l-proline (t4HYP), a crucial naturally occurred amino acid, is present in most organisms. t4HYP is a regio- and stereo-selectively hydroxylated product of l-proline and a valuable building block for pharmaceutically important intermediates/ingredients synthesis. Microbial production of t4HYP has aroused extensive investigations because of its low-cost and environmentally benign features. Herein, we reported metabolic engineering of endogenous l-proline biosynthetic pathway to enhance t4HYP production in trace l-proline-producing Escherichia coli BL21(DE3) (21-S0). The genes responsible for by-product formation from l-proline, pyruvate, acetyl-CoA, and isocitrate in the biosynthetic network of 21-S0 were knocked out to channel the metabolic flux towards l-proline biosynthesis. PdhR was knocked out to remove its negative regulation and aceK was deleted to ensure isocitrate dehydrogenase's activity and to increase NADPH/NADP⁺ level. The other genes for l-proline biosynthesis were enhanced by integration of strong promoters and 5'-untranslated regions. The resulting engineered E. coli strains 21-S1 ∼ 21-S9 harboring a codon-optimized proline 4-hydroxylase-encoding gene (P4H) were grown and fermented. A titer of 4.82 g/L of t4HYP production in 21-S6 overexpressing P4H was obtained at conical flask level, comparing with the starting 21-S0 (26 mg/L). The present work paves an efficient metabolic engineering way for higher t4HYP production in E. coli.

Prediction of organic pollutant removal using Corynebacterium glutamicum fermentation waste

The disposal of bio-waste (e.g., Corynebacterium glutamicum) produced by the fermentation industry is a serious problem and has a negative impact on economic returns. Some fermentation waste can be recycled as livestock feed, but much cannot be used. Therefore, other recycling methods must be developed to increase its applications, for example, as an environmentally friendly adsorbent for the removal or recovery of chemicals. To broaden its application as an adsorbent, we carried out comprehensive experimental and theoretical analysis. From the experiments, adsorption affinity values between C. glutamicum and micropollutants were measured, and, based on the experimental values, we developed a predictive model. The experimental results reveal that the degree of adsorption is dependent on the structural properties of the micropollutants. In particular, the adsorbent has remarkable adsorption ability toward cations, whereas anionic and neutral compounds interact weakly with the adsorbent. In addition, we found that adsorption is affected by the sodium chloride concentration. Briefly, an increase in salt concentration increases the adsorption of anions, whereas the opposite behavior is observed for cations. In contrast, the adsorption of neutral compounds was not affected by the presence of salt. The modeling studies revealed that a linear free energy relationship model can be used to predict the adsorption affinity. Based on the developed model, we found that hydrogen-bond basicity, anionic coulombic interactions, and molecular volume are the main contributing factors to the adsorption model. However, to achieve the best predictability (a coefficient of determination (R²) of 0.902), additional parameters, such as the dipolarity/polarizability and dispersive interaction, should be included. This indicates that adsorption is a product of complex interactions.

CRISPR base editing and prime editing: DSB and template-free editing systems for bacteria and plants

CRISPR-Cas (Clustered Regularly Interspaced Short Palindromic Repeats-CRISPR associated) has been extensively exploited as a genetic tool for genome editing. The RNA guided Cas nucleases generate DNA double-strand break (DSB), triggering cellular repair systems mainly Non-homologous end-joining (NHEJ, imprecise repair) or Homology-directed repair (HDR, precise repair). However, DSB typically leads to unexpected DNA changes and lethality in some organisms. The establishment of bacteria and plants into major bio-production platforms require efficient and precise editing tools. Hence, in this review, we focus on the non-DSB and template-free genome editing, i.e., base editing (BE) and prime editing (PE) in bacteria and plants. We first highlight the development of base and prime editors and summarize their studies in bacteria and plants. We then discuss current and future applications of BE/PE in synthetic biology, crop improvement, evolutionary engineering, and metabolic engineering. Lastly, we critically consider the challenges and prospects of BE/PE in PAM specificity, editing efficiency, off-targeting, sequence specification, and editing window.

l-arginine production in Corynebacterium glutamicum: manipulation and optimization of the metabolic process

As an important semi-essential amino acid, l-arginine is extensively used in the food and pharmaceutical fields. At present, l-arginine production depends on cost-effective, green, and sustainable microbial fermentation by using a renewable carbon source. To enhance its fermentative production, various metabolic engineering strategies have been employed, which provide valid paths for reducing the cost of l-arginine production. This review summarizes recent advances in molecular biology strategies for the optimization of l-arginine-producing strains, including manipulating the principal metabolic pathway, modulating the carbon metabolic pathway, improving the intracellular biosynthesis of cofactors and energy usage, manipulating the assimilation of ammonia, improving the transportation and membrane permeability, and performing biosensor-assisted high throughput screening, providing useful insight into the current state of l-arginine production.

Screening of a genome-reduced Corynebacterium glutamicum strain library for improved heterologous cutinase secretion

The construction of microbial platform organisms by means of genome reduction is an ongoing topic in biotechnology. In this study, we investigated whether the deletion of single or multiple gene clusters has a positive effect on the secretion of cutinase from Fusarium solani pisi in the industrial workhorse Corynebacterium glutamicum. A total of 22 genome-reduced strain variants were compared applying two Sec signal peptides from Bacillus subtilis. High-throughput phenotyping using robotics-integrated microbioreactor technology with automated harvesting revealed distinct cutinase secretion performance for a specific combination of signal peptide and genomic deletions. The biomass-specific cutinase yield for strain GRS41_51_NprE was increased by ~ 200%, although the growth rate was reduced by ~ 60%. Importantly, the causative deletions of genomic clusters cg2801-cg2828 and rrnC-cg3298 could not have been inferred a priori. Strikingly, bioreactor fed-batch cultivations at controlled growth rates resulted in a complete reversal of the screening results, with the cutinase yield for strain GRS41_51_NprE dropping by ~ 25% compared to the reference strain. Thus, the choice of bioprocess conditions may turn a 'high-performance' strain from batch screening into a 'low-performance' strain in fed-batch cultivation. In conclusion, future studies are needed in order to understand metabolic adaptations of C. glutamicum to both genomic deletions and different bioprocess conditions.

Structural features of the glutamate-binding protein from Corynebacterium glutamicum

L-glutamate (Glu) is the major excitatory transmitter in mammalian brain. Inadequate concentration of Glu in the brain correlates to mood disorder. In industry, Glu is used as a flavour enhancer in food and in foodstuff processing. A high concentration of Glu has several effects on human health such as hypersensitive effects, headache and stomach pain. The presence of Glu in food can be detected by different analytical methods based on chromatography, or capillary electrophoresis or amperometric techniques. We have isolated and characterized a glutamate-binding protein (GluB) from the Gram-positive bacteria Corynebacterium glutamicum. Together with GluC protein, GluD protein and the cytoplasmic protein GluA, GluB permits the transport of Glu in/out of cell. In this study, we have investigated the binding features of GluB as well as the effect of temperature on its structure both in the absence and in the presence of Glu. The results have showed that GluB has a high affinity and selectivity versus Glu (nanomolar range) and the presence of the ligand induces a higher thermal stability of the protein structure.

Elongation factor P is required for EIIGlc translation in Corynebacterium glutamicum due to an essential polyproline motif

Translating ribosomes require elongation factor P (EF-P) to incorporate consecutive prolines (XPPX) into nascent peptide chains. The proteome of Corynebacterium glutamicum ATCC 13032 contains a total of 1,468 XPPX motifs, many of which are found in proteins involved in primary and secondary metabolism. We show here that synthesis of EII^Glc , the glucose-specific permease of the phosphoenolpyruvate (PEP): sugar phosphotransferase system (PTS) encoded by ptsG, is strongly dependent on EF-P, as an efp deletion mutant grows poorly on glucose as sole carbon source. The amount of EII^Glc is strongly reduced in this mutant, which consequently results in a lower rate of glucose uptake. Strikingly, the XPPX motif is essential for the activity of EII^Glc , and substitution of the prolines leads to inactivation of the protein. Finally, translation of GntR2, a transcriptional activator of ptsG, is also dependent on EF-P. However, its reduced amount in the efp mutant can be compensated for by other regulators. These results reveal for the first time a translational bottleneck involving production of the major glucose transporter EII^Glc , which has implications for future strain engineering strategies.

Insights into the biochemical and functional characterization of sortase E transpeptidase of Corynebacterium glutamicum

Most Gram-positive bacteria contain a membrane-bound transpeptidase known as sortase which covalently incorporates the surface proteins on to the cell wall. The sortase-displayed protein structures are involved in cell attachment, nutrient uptake and aerial hyphae formation. Among the six classes of sortase (A-F), sortase A of S. aureus is the well-characterized housekeeping enzyme considered as an ideal drug target and a valuable biochemical reagent for protein engineering. Similar to SrtA, class E sortase in GC rich bacteria plays a housekeeping role which is not studied extensively. However, C. glutamicum ATCC 13032, an industrially important organism known for amino acid production, carries a single putative sortase (NCgl2838) gene but neither in vitro peptide cleavage activity nor biochemical characterizations have been investigated. Here, we identified that the gene is having a sortase activity and analyzed its structural similarity with Cd-SrtF. The purified enzyme showed a greater affinity toward LAXTG substrate with a calculated KM of 12 ± 1 µM, one of the highest affinities reported for this class of enzyme. Moreover, site-directed mutation studies were carried to ascertain the structure functional relationship of Cg-SrtE and all these are new findings which will enable us to perceive exciting protein engineering applications with this class of enzyme from a non-pathogenic microbe.

Microbial production of 4-amino-1-butanol, a four-carbon amino alcohol

4-Amino-1-butanol (4AB) serves as an important intermediate compound for drugs and a precursor of biodegradable polymers used for gene delivery. Here, we report for the first time the fermentative production of 4AB from glucose by metabolically engineered Corynebacterium glutamicum harboring a newly designed pathway comprising a putrescine (PUT) aminotransferase (encoded by ygjG) and an aldehyde dehydrogenase (encoded by yqhD) from Escherichia coli, which convert PUT to 4AB. Application of several metabolic engineering strategies such as fine-tuning the expression levels of ygjG and yqhD, eliminating competing pathways, and optimizing culture condition further improved 4AB production. Fed-batch culture of the final metabolically engineered C. glutamicum strain produced 24.7 g/L of 4AB. The strategies reported here should be useful for the microbial production of primary amino alcohols from renewable resources.