Traffic aerosol lobar doses deposited in the human respiratory system

Correlation between Exposure to UFP and ACE/ACE2 Pathway: Looking for Possible Involvement in COVID-19 Pandemic

The overlap between the geographic distribution of COVID-19 outbreaks and pollution levels confirmed a correlation between exposure to atmospheric particulate matter (PM) and the SARS-CoV-2 pandemic. The RAS system is essential in the pathogenesis of inflammatory diseases caused by pollution: the ACE/AngII/AT1 axis activates a pro-inflammatory pathway, which is counteracted by the ACE2/Ang(1-7)/MAS axis, which activates an anti-inflammatory and protective pathway. However, ACE2 is also known to act as a receptor through which SARS-CoV-2 enters host cells to replicate. Furthermore, in vivo systems have demonstrated that exposure to PM increases ACE2 expression. In this study, the effects of acute and sub-acute exposure to ultrafine particles (UFP), originating from different anthropogenic sources (DEP and BB), on the levels of ACE2, ACE, COX-2, HO-1, and iNOS in the lungs and other organs implicated in the pathogenesis of COVID-19 were analyzed in the in vivo BALB/c male mice model. Exposure to UFP alters the levels of ACE2 and/or ACE in all examined organs, and exposure to sub-acute DEP also results in the release of s-ACE2. Furthermore, as evidenced in this and our previous works, COX-2, HO-1, and iNOS levels also demonstrated organ-specific alterations. These proteins play a pivotal role in the UFP-induced inflammatory and oxidative stress responses, and their dysregulation is linked to the development of severe symptoms in individuals infected with SARS-CoV-2, suggesting a heightened vulnerability or a more severe clinical course of the disease. UFP and SARS-CoV-2 share common pathways; therefore, in a "risk stratification" concept, daily exposure to air pollution may significantly increase the likelihood of developing a severe form of COVID-19, explaining, at least in part, the greater lethality of the virus observed in highly polluted areas.

PM2.5 promotes pulmonary fibrosis by mitochondrial dysfunction

Pulmonary fibrosis is known as an incurable lung disorder with irreversible progression of chronic injury, myofibroblast proliferation, extracellular matrix (ECM) accumulation, and tissue scarring. Atmospheric particulate matter 2.5 (PM_2.5 ) is implicated as a risk factor of several diseases, especially lung diseases such as pulmonary fibrosis. The molecular mechanism which participates PM_2.5 -induced pulmonary fibrosis in type II alveolar cells (AEII) has yet to be determined. Our results proved that short- and long-term exposure to PM_2.5 significantly stimulated epithelial-mesenchymal transition (EMT) activity in AEII cells, according to, changes in gene signature analyzed by RNA-seq and cell morphology. Furthermore, Gene Ontology (GO) enrichment analysis also suggested that mitochondrial dysfunction was related to progression of pulmonary fibrosis in AEII after PM_2.5 exposure. We observed a marked decline in mitochondria membrane potential (MMP), as well as fragmented mitochondria, in AEII cells exposed to PM_2.5 , which suggests that energy metabolism is suppressed after PM_2.5 exposure. We also confirmed that PM_2.5 exposure could influence the expression levels of Mfn1, Mfn2, and Drp1 in AEII. Pretreatment of mitochondrial fusion promoter M1 was able to reverse mitochondrial dysfunction as well as EMT in AEII. These data suggested the key role of mitochondrial fragmentation in AEII, which was induced by PM_2.5 exposure, and participated pathogenesis of pulmonary fibrosis. Finally, we investigated the response of lung tissue exposed to PM_2.5 in vivo. The data indicated that the lung tissue exposed to PM_2.5 obviously induced collagen accumulation. Moreover, IHC results revealed that PM_2.5 enhanced Drp1 expression but suppressed Mfn1 and Mfn2 expression in lung tissue. The current study provides novel insight of pulmonary fibrosis caused by PM_2.5 exposure.

Source-oriented risk and lung-deposited surface area (LDSA) of ultrafine particles in a Southeast Asia urban area

Submicron and ultrafine particle (UFP) exposure may be epidemiologically and toxicologically linked to pulmonary, neurodegenerative, and cardiovascular diseases. This study explores UFP and fine particle sources using a positive matrix factorization (PMF) model based on PM_2.5 chemical compositions and particle number size distributions (PNSDs). The particle chemical composition and size distribution contributions are simultaneously identified to evaluate lung deposition and excess cancer risks. High correlations between the PNSD and chemical composition apportionment results were observed. Fresh and aged traffic particles dominated the number concentrations, while heterogeneous, photochemical reactions and/or regional transport may have resulted in secondary aerosol formation. Fresh and aged road traffic particle sources mostly contributed to the lung deposition dosage in the pulmonary region (~53 %), followed by the tracheobronchial (~30.4 %) and head regions (~16.6 %). However, lung-deposited surface area (LDSA) concentrations were dominated by aged road traffic (~39.2 %) and secondary aerosol (~33.2 %) sources. The excess cancer risks caused by Cr⁶⁺, Ni, and As were also mainly contributed to by aged road traffic (~31.7 %) and secondary aerosols (~67 %). The source apportionments based on the physical and chemical properties of aerosol particles are complementary, offering a health impact benchmark of UFPs in a Southeast Asia urban city.

Interactions of chemical components in ambient PM2.5 with influenza viruses

The significance of this work is that ambient PM_2.5 is a direct transmission mode for influenza virus infection to the human alveolar epithelium. The concentration of PM_2.5 was 11.7 ± 5.5 μg/m³ in Taipei during 24 December 2019-13 January 2020. Approximately 79% of inhaled PM_2.5 is able to reach the upper-to-lower airway, and 47% of PM_2.5 is able to reach the alveolar epithelium for influenza virus infection. Influenza A and B viruses were detected in PM_2.5 on 9 days, and the influenza A/H5 virus was detected on 15 days during the study period. FL and Pyr were negatively correlated with the influenza A virus. D(ah)P and Acp were positively correlated with the influenza B and A/H5 viruses, respectively. Cd, V, and Zn were positively correlated with the influenza A, B, and A/H5 viruses, respectively. Next, influenza A, B, and A/H5 viral plasmids interacted with carbon black, H₂O₂, DEPs, and UD. We observed that H₂O₂ significantly decreased levels of complementary DNA of the three influenza viruses. DEPs and UD significantly decreased influenza A and A/H5 viral levels. In conclusion, chemicals in PM_2.5 may play vital roles in terms of viable influenza virus in the atmosphere.

Exposure to long-range transported particulate matter and modeling age-related particle deposition

Exposure to particulate matter (PM) is known to cause cardiovascular disease and increase mortality and morbidity. Asian dust (AD) is a meteorological phenomenon which affects much of East Asia year-round but especially during the spring months. Here, we have characterized concentrations of PM₁₀ and classified synoptic air flow trajectories using HYSPLIT model for Asian dust events (from March to April) in Jeju island, Korea. The ADE is a phenomenon in which sand and dust in the deserts of China or Mongolia rise mainly in spring and are blown away by western winds and gradually subside. The calculated inhaled PM₁₀ doses from specific microenvironments (home, work or school, and transportation) were from 5.28 to 101.48 μg depending on age group and different microenvironments while the calculated PM₁₀ inhaled doses for ADE ranged within 67.92 -769.27 μg. Also, we have evaluated the contribution of specific microenvironments to the exposure for different age groups using time-activity patterns and calculated inhaled PM₁₀ doses and deposited mass/mass flux so as to estimate exposure using multiple-path particle dosimetry (MPPD) model. The monthly average outdoor PM₁₀ concentration range was 29.3-65.4 μg/m³, whereas the monthly PM₁₀ concentration for ADE was 127.0-342.0 μg/m³. Air masses from clusters 1 and 2 were 24% and 29% (in 2017), clusters 2 and 3 were 24% and 32% (in 2018), and clusters 1 and 3 were 28% and 26% (in 2019) for ADE. In the aerosol deposition based on MPPD model, the corresponding values for daily particle deposited mass for two age groups ranged from 8.64 ×10^-5 μg (age 8) to 8.64 ×10^-4 μg (age 21). We assessed the PM_2.5 exposure considering time-activity patterns, age groups, and ADE exposure evaluation caused by long-range transport airflow; this could be helpful for assessing PM₁₀ exposure-related health evaluation.

In vitro exposure to complete engine emissions - a mini-review

Outdoor air pollution is classified as carcinogenic to humans and exposure to it contributes to increased incidence of various diseases, including cardiovascular, neurological or pulmonary disorders. Vehicle engine emissions represent a significant part of outdoor air pollutants, particularly in large cities with high population density. Considering the potentially negative health impacts of engine emissions exposure, the application of reliable test systems allowing assessment of the biological effects of these pollutants is crucial. The exposure systems should use relevant, preferably multicellular, cell models that are treated with the complete engine exhaust (i.e. a realistic mixture of particles, chemical compounds bound to them and gaseous phase) at the air-liquid interface. The controlled delivery and characterization of chemical and/or particle composition of the exhaust should be possible. In this mini-review we report on such exposure systems that have been developed to date. We focus on a brief description and technical characterization of the systems, and discuss the biological parameters detected following exposure to a gasoline/diesel exhaust. Finally, we summarize and compare findings from the individual systems, including their advantages/limitations.

Mass dose rates of particle-bound organic pollutants in the human respiratory tract: Implications for inhalation exposure and risk estimations

To date, little is known about the effective doses of airborne particulate matter (PM) and PM-bound hazardous organic components to the human respiratory tract (HRT). In the light of this, here we provide particle mass dose rates (dose per hour of exposure) of PM and a suite of PM-bound hazardous organic compounds in the HRT for two population age groups (adults & children). More specifically, the mass dose rates of PM and PM-bound polycyclic aromatic hydrocarbons (PAHs), nitrated-PAH (NPAHs), polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs) and polybrominated diphenyl ethers (PBDEs) were estimated at two urban sites using a multiple path particle dosimetry model. We find that, in most cases, the total mass doses are following similar variations across sites and seasons as their ambient total concentrations, however their distribution in the HRT is a function of the particle size distributions and the physiological parameters of each age group. More specifically, the majority of the deposited mass of PM and all the chemical components investigated was accumulated in the upper airways instead of the lungs. We further show that children, due to their different physiology, are more susceptible and receive larger fraction of the total mass doses in the deepest parts of the lungs compared to the adults' group. Comparing the traditional method for estimating the inhalation risk, which is based on the ambient concentration of pollutants, and a modified version using the mass dose in the HRT, we find that the former may overestimate the reported risks. The results presented here provide a novel dataset composed by previously undetermined doses of hazardous airborne particulate organic components in the HRT and demonstrate that alternative health risk estimation approaches may capture some variabilities that are traditionally overlooked.

Where Do Ultrafine Particles and Nano-Sized Particles Come From?

This paper presents an overview of the literature studies on the sources of ultrafine particles (UFPs), nanomaterials (NMs), and nanoparticles (NPs) occurring in indoor (occupational and residential) and outdoor environments. Information on the relevant emission factors, particle concentrations, size, and compositions is provided, and health relevance of UFPs and NPs is discussed. Particular attention is focused on the fraction of particles that upon inhalation deposit on the olfactory bulb, because these particles can possibly translocate to brain and their possible role in neurodegenerative diseases is an important issue emerging in the recent literature.

Size resolved aerosol respiratory doses in a Mediterranean urban area: From PM10 to ultrafine particles

In the framework of the 2017 "carbonaceous aerosol in Rome and Environs" (CARE) experiment, particle number size distributions have been continuously measured on February 2017 in downtown Rome. These data have been used to estimate, through MPPD model, size and time resolved particle mass, surface area and number doses deposited into the respiratory system. Dosimetry estimates are presented for PM₁₀, PM_2.5, PM₁ and Ultrafine Particles (UFPs), in relation to the aerosol sources peculiar to the Mediterranean basin and to the atmospheric conditions. Particular emphasis is focused on UFPs and their fraction deposited on the olfactory bulb, in view of their possible translocation to the brain. The site of PM₁₀ deposition within the respiratory system considerably changes, depending on the aerosol sources and then on its different size distributions. On making associations between health endpoints and aerosol mass concentrations, the relevant coarse and fine fractions would be more properly adopted, because they have different sources, different capability of penetrating deep into the respiratory system and different toxicological implications. The separation between them should be set at 1 µm, rather than at 2.5 µm, because the fine fraction is considerably less affected by the contribution of the natural sources. Mass dose is a suitable metric to describe coarse aerosol events but gives a poor representation of combustion aerosol. This fraction of particles, made of UFPs and of accumulation mode particles (mainly with size below 0.2 µm), is of high health relevance. It elicited the highest oxidative activity in the CARE experiment and is properly described by the particle surface area and by the number metrics. Such metrics are even more relevant for the UFP doses deposited on the olfactory bulb, in consideration of the role recognized to oxidative stress in the progression of neurodegenerative diseases. Such metrics would be more appropriate, rather than PM_x mass concentrations, to correlate neurodegenerative pathologies with aerosol pollution.

Identification and validation of metformin protects against PM2.5-induced macrophages cytotoxicity by targeting toll like receptor pathway

Fine particle matter (PM_2.5) has been extensively reported to contribute to the pathogenesis of pulmonary diseases. Recently, metformin has been reported to attenuate PM_2.5 associated respiratory and cardiovascular injury, but the underling mechanism has not been discovered. Here, we performed comprehensively bioinformatics analysis and fully validation experiment to investigate the protection role of metformin and underling mechanism with RNAseq profile in GEO database. A combination of various bioinformatics tools including edgeR, principal component analysis (PCA), K-Means clustering, Gene Set Enrichment Analysis (GSEA), GO and KEGG enrichment were performed to identify the TLRs/MyD88/NF-κB axis functional as the key signaling transduction during PM_2.5 associated toxicity. PM_2.5 activated TLRs/MyD88/NF-κB pathway and resulted in significantly generation of IL-6, TNF-α, mitochondrial damage, decreasing of cell viability and increased LDH activity in RAW264.7 cells. Metformin significantly attenuated the production of IL-6, mitochondrial damage, cell viability and LDH activity by limiting TLRs/MyD88/NF-κB pathway. The siRNA against AMPKα2 or negative control were transfected to RAW264.7 cells to identify whether metformin protects PM_2.5-induced cytotoxicity in an AMPKα2-dependent manner. Pretreatment with metformin significantly attenuated PM_2.5 induced decreasing of cell viability and increased LDH activity, as well as inhibited the TLRs/MyD88/NF-κB pathway in both siControl or siAMPKα2 cells. Taken together, our results indicate that metformin protects against PM_2.5-induced mitochondrial damage and cell cytotoxicity by inhibiting TLRs/MyD88/NF-κB signaling pathway in an AMPKα2 independent manner.

Assessment of indoor air exposure at residential homes: Inhalation dose and lung deposition of PM10, PM2.5 and ultrafine particles among newborn children and their mothers

Accurate assessment of particulate matter (PM) dose and respiratory deposition is essential to better understand the risks of exposure to PM and, consequently, to develop the respective risk-control strategies. In homes, this is especially relevant in regards to ultrafine particles (UFP; <0.1 μm) which origin in these environments is mostly due to indoor sources. Thus, this study aimed to estimate inhalation doses for different PM mass/number size fractions (i.e., PM₁₀, PM_2.5 and UFP) in indoor air of residential homes and to quantify the deposition (total, regional and lobar) in human respiratory tract for both newborn children and mothers. Indoor real-time measurements of PM₁₀, PM_2.5 and UFP were conducted in 65 residential homes situated in Oporto metropolitan area (Portugal). Inhalation doses were estimated based on the physical characteristics of individual subjects and their activity patterns. The multi-path particle dosimetry model was used to quantify age-specific depositions in human respiratory tract. The results showed that 3-month old infants exhibited 4-fold higher inhalation doses than their mothers. PM₁₀ were primarily deposited in the head region (87%), while PM_2.5 and UFP depositions mainly occurred in the pulmonary area (39% and 43%, respectively). Subject age affected the pulmonary region and the total lung deposition; higher deposition being observed among the newborns. Similarly, lower lobes (left lobe: 37% and right lobe: 30%) received higher PM deposition than upper and middle lobes; right lobes lung are prone to be more susceptible to respiratory problems, since asymmetric deposition was observed. Considering that PM-related diseases occur at specific sites of respiratory system, quantification of site-specific particle deposition should be predicted in order to better evidence the respective health outcomes resulting from inhaled PM.

Short-term PM2.5 exposure induces sustained pulmonary fibrosis development during post-exposure period in rats

Up to now, while some toxicological studies have identified pulmonary fibrosis immediately induced by long-term PM_2.5 exposure, there has been no evidence indicating, whether short-term exposure can lead to post-exposure development of pulmonary fibrosis. Here, we treated rats with PM_2.5 for 1 month (10 times), followed by normal feeding for 18 months. ¹⁸F-FDG intake, which is linked with the initiation and development of pulmonary fibrosis in living bodies, was found to gradually increase in lung following exposure through micro PET/CT imaging. Histolopathological examination revealed continuous deterioration of pulmonary injury post-exposure. Collagen deposition and hydroxyproline content continued to increase all along in the post-exposure duration, indicating pulmonary fibrosis development. Chronic and persistent induction of pulmonary inflammatory gene expression (Tnf, Il1b, Il6, Ccl2, and Icam1), epithelial mesenchymal transition (EMT, reduction of E-cadherin and elevation of fibronectin) and RelA/p65 upregulation, as well as serum inflammatory cytokine production, were also found in PM_2.5-treated rats. Pulmonary oxidative stress, manifested by increase of MDA and decrease of GSH and SOD, was induced during exposure but disappeared in later post-exposure duration. These results suggested that short-term PM_2.5 exposure could lead to sustained post-exposure pulmonary fibrosis development, which was mediated by oxidative-stress-initiated NF-κB/inflammation/EMT pathway.

Oxidative Potential Associated with Urban Aerosol Deposited into the Respiratory System and Relevant Elemental and Ionic Fraction Contributions

Size-segregated aerosol measurements were carried out at an urban and at an industrial site. Soluble and insoluble fractions of elements and inorganic ions were determined. Oxidative potential (OP) was assessed on the soluble fraction of Particulate Matter (PM) by ascorbic acid (AA), dichlorofluorescein (DCFH) and dithiothreitol (DTT) assays. Size resolved elemental, ion and OP doses in the head (H), tracheobronchial (TB) and alveolar (Al) regions were estimated using the Multiple-Path Particle Dosimetry (MPPD) model. The total aerosol respiratory doses due to brake and soil resuspension emissions were higher at the urban than at the industrial site. On the contrary, the doses of anthropic combustion tracers were generally higher at the industrial site. In general, the insoluble fraction was more abundantly distributed in the coarse than in the fine mode and vice versa for the soluble fraction. Consequently, for the latter, the percent of the total respiratory dose deposited in TB and Al regions increased. Oxidative potential assay (OPAA) doses were distributed in the coarse region; therefore, their major contribution was in the H region. The contribution in the TB and Al regions increased for OPDTT and OPDCFH.

Nanoparticle Behaviour in an Urban Street Canyon at Different Heights and Implications on Indoor Respiratory Doses

The amount of outdoor particles that indoor environments receive depends on the particle infiltration factors (Fin), peculiar of each environment, and on the outdoor aerosol concentrations and size distributions. The respiratory doses received, while residing indoor, will change accordingly. This study aims to ascertain to what extent such doses are affected by the vertical distance from the traffic sources. Particle number size distributions have been simultaneously measured at street level and at about 20 m height in a street canyon in downtown Rome. The same Fin have been adopted to estimate indoor aerosol concentrations, due to the infiltration of outdoor particles and then the relevant daily respiratory doses. Aerosol concentrations at ground floor were more than double than at 20 m height and richer in ultrafine particles. Thus, although aerosol infiltration efficiency was on average higher at 20 m height than at ground floor, particles more abundantly infiltrated at ground level. On a daily basis, this involved a 2.5-fold higher dose at ground level than at 20 m height. At both levels, such doses were greater than those estimated over the period of activity of some indoor aerosol sources; therefore, they represent an important contribution to the total daily dose.

In Vivo Comparative Study on Acute and Sub-acute Biological Effects Induced by Ultrafine Particles of Different Anthropogenic Sources in BALB/c Mice

Exposure to ultrafine particles (UFPs) leads to adverse effects on health caused by an unbalanced ratio between UFPs deposition and clearance efficacy. Since air pollution toxicity is first direct to cardiorespiratory system, we compared the acute and sub-acute effects of diesel exhaust particles (DEP) and biomass burning-derived particles (BB) on bronchoalveolar Lavage Fluid (BALf), lung and heart parenchyma. Markers of cytotoxicity, oxidative stress and inflammation were analysed in male BALB/c mice submitted to single and repeated intra-tracheal instillations of 50 μg UFPs. This in-vivo study showed the activation of inflammatory response (COX-2 and MPO) after exposure to UFPs, both in respiratory and cardiovascular systems. Exposure to DEP results also in pro- and anti-oxidant (HO-1, iNOS, Cyp1b1, Hsp70) protein levels increase, although, stress persist only in cardiac tissue under repeated instillations. Statistical correlations suggest that stress marker variation was probably due to soluble components and/or mediators translocation of from first deposition site. This mechanism, appears more important after repeated instillations, since inflammation and oxidative stress endure only in heart. In summary, chemical composition of UFPs influenced the activation of different responses mediated by their components or pro-inflammatory and pro-oxidative molecules, indicating DEP as the most damaging pollutant in the comparison.

Respiratory tract deposition of inhaled roadside ultrafine refractory particles in a polluted megacity of South-East Asia

Recent studies demonstrate that Black Carbon (BC) pollution in economically developing megacities remain higher than the values, which the World Health Organization considers to be safe. Despite the scientific evidence of the degrees of BC exposure, there is still a lack of understanding on how the severe levels of BC pollution affect human health in these regions. We consider information on the respiratory tract deposition dose (DD) of BC to be essential in understanding the link between personal exposure to air pollutants and corresponding health effects. In this work, we combine data on fine and ultrafine refractory particle number concentrations (BC proxy), and activity patterns to derive the respiratory tract deposited amounts of BC particles for the population of the highly polluted metropolitan area of Manila, Philippines. We calculated the total DD of refractory particles based on three metrics: refractory particle number, surface area, and mass concentrations. The calculated DD of total refractory particle number in Metro Manila was found to be 1.6 to 17 times higher than average values reported from Europe and the U.S. In the case of Manila, ultrafine particles smaller than 100 nm accounted for more than 90% of the total deposited refractory particle dose in terms of particle number. This work is a first attempt to quantitatively evaluate the DD of refractory particles and raise awareness in assessing pollution-related health effects in developing megacities. We demonstrate that the majority of the population may be highly affected by BC pollution, which is known to have negative health outcomes if no actions are taken to mitigate its emission. For the governments of such metropolitan areas, we suggest to revise currently existing environmental legislation, raise public awareness, and to establish supplementary monitoring of black carbon in parallel to already existing PM₁₀ and PM_2.5 measures.

PM2.5 induced pulmonary fibrosis in vivo and in vitro

Epidemiological studies have revealed positive correlation between particulate matter with an aerodynamic diameter of < 2.5 µm (PM_2.5) and pulmonary fibrosis (PF). As etiology and pathogenesis of PF have not been fully elucidated, this study was to investigate the potential mechanism by which PM_2.5 exposure adversely induced PF in vivo and in vitro. In the present study, 6-week-old C57/BL6J mice were intranasally administrated with PM_2.5 (100 μg/day) for 4 weeks. Micro-CT and hematoxylin-eosin (HE) staining analysis showed that lung inflammation and incipient fibrosis symptoms were induced after PM_2.5 exposure. The expression of Transforming growth factor-β1 (TGF-β1), α-Smooth muscle actin (α-SMA), and Collagen type I (COL1) in mice lung was increased. Upregulation of TGF-β1 in mice serum was also detected by ELISA after exposure to PM_2.5. Moreover, chronic PM_2.5 exposure on human bronchial epithelial cell line BEAS-2B cells led to activation of TGF-β1/SMAD3 pathway, TGF-β1 excretion and epithelial-mesenchymal transition (EMT), while PM_2.5 also triggered the activation of TGF-β1/SMAD3 pathway, TGF-β1 excretion as well as differentiation of human pulmonary fibroblast cell line HFL-1 cells, and TGF-β1 production in mouse macrophage cell line RAW264.7 cells. Furthermore, cell culture medium of PM_2.5-treated BEAS-2B and RAW264.7 cells could both activate TGF-β1/SMAD3 signaling, α-SMA and COL1 upregulation in HFL-1 cells. Therefore, we concluded that PM_2.5 could induce PF by targeting pulmonary epithelium, macrophages and fibroblasts, suggesting that PM_2.5 was a potent initiator of PF.

Evaluation of the Submicron Particles Distribution Between Mountain and Urban Site: Contribution of the Transportation for Defining Environmental and Human Health Issues

Transportation is one of the main causes of atmospheric pollution, especially in downtown big cities. Researchers usually point their attention to gaseous and/or particulate matter pollutants. This paper investigated the role of submicron particles, particularly the fraction ranging between 5–560 nm, in aerosol chemistry for identifying the contribution of autovehicular traffic and investigating the doses deposited in the human respiratory tract. Measurements carried out by two Fast Mobility Particle Sizer (FMPS, TSI) analyzers were simultaneously performed at two different sampling sites (an urban and a mountain site) during workdays and weekends in July. The total particle number (2–2.5 times higher in the urban site), the aerosol size distribution (different modes during the day), and the ultrafine/non-ultrafine particle ratios (ranging between 2–4 times between two sites) were investigated and discussed in relationship to the high autovehicular traffic in Rome and the almost null anthropogenic emissions at the mountain site, as well as the differing contributions of both to the “fresh nucleation” and to “aged aerosol”. Furthermore, the regional cumulative number doses deposited in the human respiratory tract were studied for both sites: The difference between the urban/mountain site was very high (up to 15 fold), confirming the pollutant role of transportation.

Characteristics of indoor air pollution and estimation of respiratory dosage under varied fuel-type and kitchen-type in the rural areas of Telangana state in India

Indoor Air Pollution (IAP) is one of the top environmental risks in developing countries including India, with more than a million deaths annually, predominantly through Particulate Matter (PM) exposure. The current study deals with the measurement of PM concentrations in rural households under varied fuel and kitchen-types, evaluation of the indoor air pollution (IAP) characteristics and estimation of respiratory dosage for the different subjects (women, young children and the elderly). Monitoring of particulate matter (PM) was carried out during summer, monsoon and winter season with biomass, LPG and combine of biomass and LPG being used as fuel for cooking. Furthermore, different types of indoor kitchens (with partition and without partition) and outdoor kitchens (separate enclose kitchen and open kitchen) were also considered as kitchen type along with fuel are two crucial factors contributing to IAP. Deposition fractions were calculated using Multiple Particle Path Dosimetry (MPPD) to study the deposition patterns in different parts of the human respiratory tract (HRT) - head, tracheobronchial and pulmonary for women, young children and the elderly people. Dosage of particulate matter was calculated by inputting the recorded PM measurements, a comparison made for biomass-LPG and dosage intensification due to the kitchen-type presented. While the biomass households exhibited high levels of dosage (1181.4 to 5891.7 μg) against the LPG households (89.9 to 811.2 μg), the indoor kitchen types exhibited a maximum intensification of 10.6 times than outdoor kitchens with the same fuel. This study not only establishes the IAP characteristics but also quantifies the role of fuel-type and kitchen-type in IAP. The study also indicates various measures that could be deployed to reduce dosage and thus minimize the health risks.

Application of multiple-path particle dosimetry model for quantifying age specified deposition of particulate matter in human airway

Particulate matter (PM) is crucial among six criteria air pollutants, and it is frequently associated with human morbidity and mortality. According to the aerodynamic diameter, PM is classified as coarse (PM₁₀) and fine (PM_2.5). PM with these smaller sizes can easily enter and get deposited in the human airways. This deposited PM fraction commences the development of respiratory diseases such as asthma, chronic obstructive pulmonary disease, and even cancer. Thus, the quantification of PM deposition and its clearance in the human airway are essential for evaluating health risks. This study aims to investigate the size-segregated PM (PM₁₀, PM_2.5, and PM₁) deposition in human lungs. Size-segregated PM is collected using the Grimm portable environmental dust monitor during winter season near an arterial road located in Chennai city of Tamil Nadu state, India. Multiple-Path Particle Dosimetry (MPPD) Model version 3.04 is utilized for quantifying PM deposition. In MPPD, airway structures of infants (3 and 28 months), children (3, 8, 9 and 14 years) and adults (18 and 21 years) are considered for the study. The values of PM concentration, body orientation, breathing scenario, tidal volume, pause fraction, inspiration fraction, and breathing frequency are specified in the MPPD for quantifying PM depositions. Results showed that 8-year children and 28 months infant groups are recorded with maximum and minimum size-segregated PM deposition respectively. The coarse particles (PM₁₀) are primarily deposited in the head (55-95%) and tracheobronchial (3-44%) regions whereas fine particles (PM_2.5 and PM₁) depositions are observed maximum in the head (36-63%) and pulmonary (28.2-52.7%) regions. Except for the adult age group, PM_2.5 has the maximum deposition percentage in tracheobronchial and pulmonary regions. In the case of lobar depositions, lower lobes receive maximum deposition (66.4%) than the upper (27.2%) and middle lobes (6.4%). PM_2.5 dominated the deposition in all five lobes of infant, children, and adults. The clearance rate of deposited PM is high in the tracheobronchial region whereas it is low in the pulmonary region. This study also concludes that PM_2.5 is the important size fraction in lung deposition. Further, the study results can be used for human health risk assessments such as oxidative potential and toxicity of deposited PM.

Second-hand aerosol from tobacco and electronic cigarettes: Evaluation of the smoker emission rates and doses and lung cancer risk of passive smokers and vapers

Smoking activities still represent the main, and preventable, cause of lung cancer risk worldwide. For this reason, a number of studies were carried out to deepen and better characterize the emission of cigarette-generated mainstream aerosols in order to perform an a-priori evaluation of the particle doses and related lung cancer risks received by active smokers. On the contrary, a gap of knowledge still exists in evaluating the dose and risk received by passive smokers in indoor private micro-environments (e.g. homes). For this purpose, in the present paper, an experimental campaign was performed to evaluate the exposure to second-hand aerosol from conventional and electronic cigarettes and to estimate the consequent dose received by passive smokers/vapers and the related lung cancer risk. Measurements of exposure levels in terms of particle number, PM10 and black carbon concentrations, as well as particle size distributions, were performed in a naturally ventilated indoor environment during smoking activities of tobacco and electronic cigarettes. The particle emission rates of smokers and vapers, for the different aerosol metrics under investigation, were evaluated. Moreover, for a typical exposure scenario, the dose received by the passive smokers/vapers in a naturally ventilated indoor micro-environment was estimated through a Multiple-Path Particle Dosimetry (MPPD) model able to assess the particle dose received in the different tracts of the respiratory systems. Furthermore, on the basis of scientific literature data about mass fraction of carcinogenic compounds contained in cigarette-emitted particles (i.e. Heavy Metals, Benzo-a-pyrene and nitrosamines) and the estimated doses, the excess life cancer risk (ELCR) for passive smokers/vapers was evaluated. Cumulative respiratory doses for passive smokers were up to 15-fold higher than for passive vapers. The ELCR for second-hand smokers was five orders of magnitude larger than for second-hand vapers.

Submicron particle number doses in the human respiratory tract: implications for urban traffic and background environments

The deposition of ambient submicron particles in the different parts of the human respiratory tract (HRT) was, for the first time, estimated for males and females from different age classes (children-adults-seniors) of urban population in the city of Thessaloniki, northern Greece, during the cold and the warm period of the year. Outdoor daily and hourly particle number doses in the different regions of the HRT, i.e., the extra-thoracic (ET), tracheobronchial (TB), and the acinar (AC) regions, were calculated by employing the Multiple-Path Particle Dosimetry (MPPD) model. Because of the absence of information being available for the hygroscopic properties of particles, three different particle hygroscopicity scenarios were considered: (i) non-hygroscopic (i.e., raw model estimations), (ii) nearly hydrophobic, and (iii) hygroscopic particles. When hygroscopic properties were considered, we found a remarkable reduction (up to ~ 55%) in the estimated total particle number doses in comparison to the non-hygroscopic particle scenario. Furthermore, we found that the size distribution pattern of the particle doses within the different parts of the HRT was strongly affected by particles' hygroscopic properties with the non-hygroscopic particle scenario significantly overestimating the particle doses in the sub-100-nm range, while underestimating the doses of larger particles. On the contrary, the deposition density appeared to be negligibly affected by the particles' hygroscopic properties, implying the existence of a possible threshold in the number of particles deposited per airway surface area. Similarly, the lobar particle number deposition fraction was unaffected by the hygroscopic properties of particles, as well as the ambient particle size distribution and the individuals' physiological parameters. The total particle number deposition doses estimated here are within the range of the corresponding values reported for other urban environments. It is hoped that our findings could contribute to better understanding of submicron particle exposure and add to the development of more sufficient methods to evaluate the related health impacts.

Dynamic of submicrometer particles in urban environment

Many studies show that particle toxicity increases with decreasing their size, emphasizing the role of submicrometric particles, in particular of ultrafine particles (<100 nm). In fact, particles greater than 2.5 μm are quickly removed through dry and wet deposition on the timescale of hours whereas submicrometer particles may reside in atmosphere for weeks, penetrate in indoor environment, and be long-range transported. High aerosol size resolution measurements are important for a correct assessment of the deposition efficiency in the human respiratory system, and time resolution is another important requisite. Starting from such considerations, time-resolved aerosol particle number size distributions have been measured in downtown Rome. Fast Mobility Particle Sizer (FMPS) and Scanning Mobility Particle Sizer (SMPS) measurements have been carried out at the INAIL's Pilot Station, located in downtown Rome, in an area characterized by high density of autovehicular traffic. The two instruments have allowed to investigate deeply the urban aerosol in the range of 5.6-560 and 3.5-117 nm, respectively. In particular, the FMPS measurements have confirmed the interpretation about the transition phenomena in the time interval of few seconds, timescale typically associated with the emission of gasoline and diesel engines. In downtown Rome, the hourly average size distribution is bimodal or trimodal with maxima at about 5-15, 20-30, and 70-100 nm. Particle formation in the nucleation mode was associated to freshly emitted autovehicular exhaust.

Pedestrians in Traffic Environments: Ultrafine Particle Respiratory Doses

Particulate matter has recently received more attention than other pollutants. PM10 and PM2.5 have been primarily monitored, whereas scientists are focusing their studies on finer granulometric sizes due both to their high number concentration and their high penetration efficiency into the respiratory system. The purpose of this study is to investigate the population exposure to UltraFine Particles (UFP, submicrons in general) in outdoor environments. The particle number doses deposited into the respiratory system have been compared between healthy individuals and persons affected by Chronic Obstructive Pulmonary Disease (COPD). Measurements were performed by means of Dust Track and Nanoscan analyzers. Forty minute walking trails through areas with different traffic densities in downtown Rome have been considered. Furthermore, particle respiratory doses have been estimated for persons waiting at a bus stop, near a traffic light, or along a high-traffic road, as currently occurs in a big city. Large differences have been observed between workdays and weekdays: on workdays, UFP number concentrations are much higher due to the strong contribution of vehicular exhausts. COPD-affected individuals receive greater doses than healthy individuals due to their higher respiratory rate.