In situ remediation of ortho-nitrochlorobenzene in soil by dual oxidants (hydrogen peroxide/persulfate)

Integrated Fenton-like and ozonation based advanced oxidation processes for treatment of real-time textile effluent containing azo reactive dyes

The treatment of real-time textile effluent, collected from the Common Effluent Treatment Plant (CETP) of Kerala Industrial Infrastructure Development Corporation (KINFRA) at Kannur (District), Kerala (State), India, have been studied by utilizing the Fenton-like and ozone (O3) based advanced oxidation processes (AOPs). The Fenton-like AOP has been conducted as the pre-treatment of textile effluent involving the activation of persulfate (PS) and hydrogen peroxide (H2O2) as a single and the mixed oxidants by using the Flyash (FA)-Pd composite particles as the activator. The maximum chemical oxygen demand (COD) removal of 84% has been observed for a stand-alone O3 based treatment at an O3 flow rate of 5-6 g h-1. By conducting the pre-treatment of textile effluent with the PS, H2O2, and mixed oxidants (PS and H2O2) based Fenton-like AOPs, the COD removal after an O3 based post-treatment has been observed to be 83, 87, and 93% respectively at an O3 flow rate of 2, 3, and 5 g h-1. Hence, the Fenton-like pre-treatment involving the activation of mixed oxidants has been determined to be the best method for the highest COD removal of real-time textile effluent. The optimum values of initial oxidant-ratio (initial [H2O2]:initial [PS]), initial oxidant-dosage, and ozonation time, for the mixed oxidants based Fenton-like pre-treatment, have been determined to be 3 wt% mM-1, 6:2 wt% mM-1, and 60 min respectively. Under the most optimum conditions, the COD removal has been attributed to the combination of O2•- (for the pre-treatment) and •OOH (for the post-treatment) which possess relatively lower oxidation potential values.

An overview of electrokinetically enhanced chemistry technologies for organochlorine compounds (OCs) remediation from soil

In recent years, electrokinetic (EK) remediation technology has gained significant attention among researchers. This technology has proven effective in the remediation of low-permeability polluted soil. Organochlorines (OCs) are highly toxic, persistent, bioaccumulative, and capable of long-distance migration. They can also accumulate through the food chain, posing significant environmental risks. This paper provides a review of the reaction mechanism of combining chemical technology with EK remediation for the removal of several typical OCs. Furthermore, the factors influencing the efficiency of EK remediation, such as pH and ζ potential, voltage gradients, electrode materials, electrolytes, electrode arrangements, and soil types, are summarized. The paper also presents an overview of recent advancements in the methods of combining chemical technology with EK remediation for the treatment of OCs contaminated soil. Specifically, the research progress in surfactants-combined EK technology, chemical oxidation-combined EK technology, chemical reduction-combined EK technology, and chemical adsorption-combined EK technology is summarized. These findings serve as a foundation for ongoing and future research endeavors in the field. Further exploration and investigation in this area are essential for advancing the field and improving environmental remediation strategies.

Rhamnolipid-Enhanced ZVI-Activated Sodium Persulfate Remediation of Pyrene-Contaminated Soil

In soil, polycyclic aromatic hydrocarbons (PAHs) are tightly bound to organic components, but surfactants can effectively transform them from a solid to a liquid phase. In this study, the biosurfactant rhamnolipid (RL) was selected as the eluent; shaking elution in a thermostatic oscillator improved the elution rate of pyrene, and the effects of RL concentration, temperature, and elution time on the elution effect were compared. After four repeated washings, the maximum elution rate was 75.6% at a rhamnolipid concentration of 20 g/L and a temperature of 45 °C. We found that 38 μm Zero-Valent Iron (ZVI) had a higher primary reaction rate (0.042 h^-1), with a degradation rate of 94.5% when 3 g/L ZVI was added to 21 mM Na₂S₂O₈ at 60 °C. Finally, electron paramagnetic resonance (EPR) detected DMPO-OH and DMPO-SO₄ signals, which played a major role in the degradation of pyrene. Overall, these results show that the combination of rhamnolipid elution and persulfate oxidation system effectively remediated pyrene-contaminated soil and provides some implications for the combined remediation with biosurfactants and chemical oxidation.

Recent Developments in Advanced Oxidation Processes for Organics-Polluted Soil Reclamation

Soil pollution has become a substantial environmental problem which is amplified by overpopulation in different regions. In this review, the state of the art regarding the use of Advanced Oxidation Processes (AOPs) for soil remediation is presented. This review aims to provide an outline of recent technologies developed for the decontamination of polluted soils by using AOPs. Depending on the decontamination process, these techniques have been presented in three categories: the Fenton process, sulfate radicals process, and coupled processes. The review presents the achievements of, and includes some reflections on, the status of these emerging technologies, the mechanisms, and influential factors. At the present, more investigation and development actions are still desirable to bring them to real full-scale implementation.

A novel permeable reactive biobarrier for ortho-nitrochlorobenzene pollution control in groundwater: Experimental evaluation and kinetic modelling

Three novel permeable reactive barrier (PRB) materials composed of Cu/Fe with 0.24% and 0.43% (w/w) Cu loadings or Fe⁰ supported on wheat straw were prepared (termed materials E, F and G). These materials exhibited excellent pollutant removal efficiency and physical stability as well as the ongoing release of organic carbon and iron. Column experiments showed that materials E, F and G removed almost 100% of ortho-nitrochlorobenzene (o-NCB) from water. The rates of iron release from the E and F columns exceeded those from column G but this had no significant effect on o-NCB removal. The bacteria that degraded o-NCB in E and F were also different from those in G. The levels of these bacteria in the columns were higher than those in the initial materials, with the highest level in column E. The simultaneous reduction and microbial degradation of o-NCB was observed, with the latter being dominant. A kinetic model was established to simulate the dynamic interactions and accurately predicted the experimental results. Organic carbon from the wheat straw supported the majority of the biomass in each column, which was essential for the bioremediation process. The findings of this study suggest an economically viable approach to mitigating o-NCB pollution.

Rapid Degradation of Nitrochlorobenzene by Activated Persulfate Oxidation With Biochar Supported Nanoscaled Zero Valent Iron

Although pesticide intermediates are a kind of typical toxic pollutant in contaminated sites, the remediation of these contaminants in groundwater and soils is of limited concern. In the present study we investigated the performance of a novel heterogeneous oxidation system, biochar supported nanoscaled-zero valent iron (nZVI/BC) activated persulfate (PS), in the oxidative degradation of nitrochlorobenzene (NCB), a typical pesticide intermediate. Peanut shell based nZVI/BC was prepared and used as the PS activator. The degradation kinetics of m-, p-, and o-NCB isomers in the aqueous phase were investigated. The effects of BC/nZVI composition (Fe/BC mass ratio), the amount of BC/nZVI and PS, and initial contaminant concentration on NCB removal were also examined. Results suggest that over 90% removals of three NCB isomers could be obtained by the nZVI/BC activated PS system at initial NCB concentration of 10 mg L⁻¹. The combination of nZVI/BC composite and PS showed superior performance to PS alone. The optimal treatment condition was supposed as the Fe: BC ratio of 1:1, Fe amount of 6 mmol L⁻¹, and the mole ratio of Fe to perfulfate of 1:1.

Promoted oxidation of polycyclic aromatic hydrocarbons in soils by dual persulfate/calcium peroxide system

In situ chemical oxidations (ISCO) have been demonstrated as effective ways for remediating soils contaminated with organic pollutants by complete mineralization. This work aims to develop a technology for the oxidation remediation of soils contaminated with Polycyclic Aromatic Hydrocarbons (PAHs) using a dual calcium peroxide (CP)/persulfate (PS) oxidant system activated by oxalic acid (OA)-chelating Fe²⁺. The dual peroxide system was set up, and the effects of 5 single factors (i.e., CP dosage, PS dosage, Fe²⁺ dosage, OA concentration, and soil/water ratio) on PAHs degradation were studied using the single-factor experiment. The response surface method was then introduced to obtain the optimized experimental conditions (CP dosage, PS dosage, OA concentration) of the dual peroxide system. The result shows that the dual peroxide system significantly increased the PAHs degradation and the maximum PAHs degradation efficiency (70.8%) was achieved by the dual peroxide system under optimal conditions (PS dosage, CP concentration, Fe²⁺/PS ratio, and Fe²⁺/OA ratio was 8.89 g/kg, 0.18 mol/L, 1/4 and 0.62) at neutral soil condition. This study is an illustration of the promising efficiency of the dual peroxide system for PAH oxidation in the neutral soil and has great potential for remediation of PAHs contaminated farmland soils.

The superoxide radicals' production via persulfate activated with CuFe2O4@Biochar composites to promote the redox pairs cycling for efficient degradation of o-nitrochlorobenzene in soil

CuFe₂O₄ nanoparticles are decorated on biochar (BC) by modified sol-gel method to form the CuFe₂O₄@BC catalyst for persulfate (PS) activation in a wide pH range. The application of CuFe₂O₄@BC for o-nitrochlorobenzene degradation in soil was explored in this study. The mechanism of heterogeneous PS activation was comprehensively investigated. The synergistic effects between CuFe₂O₄ and BC could enhance catalytic activity and stability, including well dispersed CuFe₂O₄ species, efficient electron transfer and abundant oxygen functional groups. The superoxide radicals (O₂^-) produced from CuFe₂O₄ and BC could mediate Cu(I)/Cu(II) and Fe(II)/Fe(III) redox pairs on CuFe₂O₄@BC surface to activate PS, and then generating •OH and SO₄^- continuously. Moreover, the reaction intermediates are identified as well to elucidate the possible degradation pathways. These findings help to achieve more comprehensive understanding of the heterogeneous activation process of PS by CuFe₂O₄@BC catalyst.

Oxidation of nine petroleum hydrocarbon compounds by combined hydrogen peroxide/sodium persulfate catalyzed by siderite

A system consisting of hydrogen peroxide/persulfate (H₂O₂/S₂O₈^2-) catalyzed by siderite was attempted to oxidize nine representative petroleum hydrocarbon compounds [benzene, toluene, ethylbenzene, m-xylene, p-xylene, o-xylene, 1,2,4-trimethylbenzene, methyl-tert-butyl ether, and naphthalene] that tend to persist in the environment. Oxidation under different siderite dosages, H₂O₂:S₂O₈^2- ratios, and pH conditions were investigated. Results indicated that oxidation rates increased from 1.21-4.62 to 1.77-8.94 d^-1 as siderite increased from 0.16 to 0.48 g/40 mL (H₂O₂:Na₂S₂O₈ = 5:1, initial pH = 3.0), except for naphthalene (decreased from 0.58 to 0.45 d^-1 with increased siderite dosage). When the H₂O₂:S₂O₈^2- ratio was increased from 1:1 to 5:1 (siderite = 0.16 g, initial pH = 3.0), the oxidation rates increased from 0.02-0.73 to 0.33-2.19 d^-1. However, as pH increased to > 5.5 (siderite = 0.16 g, H₂O₂:Na₂S₂O₈ = 2.5:1), the oxidation rates of petroleum hydrocarbons decreased to 0.003-0.09 d^-1, which was approximately 90% less than that at pH = 3.0. The partial correlations and principal component analysis of the experimental data were conducted. Overall, both siderite dosage and H₂O₂:S₂O₈^2- ratio correlated positively with oxidation efficiency. The oxidation potential by H₂O₂/S₂O₈^2- mixtures towards the target petroleum hydrocarbon compounds seemed to be more sensitive to pH conditions than to siderite dosages or H₂O₂:S₂O₈^2- ratios.

Zero-valent iron (ZVI) Activation of Persulfate (PS) for Degradation of Para-Chloronitrobenzene in Soil

Para-chloronitrobenzene (p-CNB) in soil has posed significant health risks because of its persistence and high toxicity. The efficacy of catalyzed Zero-Valent Iron (ZVI), activated persulfate, and ZVI-persulfate processes for the degradation of p-CNB in soil was investigated. The p-CNB removal rate significantly increased from 10.8 to 90.1% with increased ZVI dosage from 0.1 mmol g^-1 to 1.0 mmol g^-1. The p-CNB removal increased with the decrease of initial pH and a removal efficiency of 85.3% was obtained at an initial pH value of 6.8 in combined system. The p-CNB removal rate in the single persulfate system and ZVI system was 36.5% and 60.2%, while the ZVI-persulfate system showed more sufficient p-CNB removal capacity and the removal rate of p-CNB was 88.7%. Scanning electron microscopy (SEM) and Electron paramagnetic resonance (EPR) was adopted in order to explore the degradation mechanism by ZVI-Persulfate system in soil.

Treatment of Organics Contaminated Wastewater by Ozone Micro-Nano-Bubbles

The efficiency of ozone for the treatment of organics contaminated wastewater is limited by its slow dissolution rate and rapid decomposition in the aqueous phase. Micro-nano-bubbles (MNBs) are a novel method to prolong the reactivity of the ozone in the aqueous phase, thereby accelerating the treatment of the contaminant. In this study, the effects of pH and salinity on the treatment efficiency of ozone MNBs were examined. The highest efficiency was observed in weak acidic conditions and an increase in salinity enhanced the treatment efficiency significantly. Furthermore, the treatment of highly saline industrial wastewater as well as multi-contaminant groundwater containing persistent organics were also investigated. Treatment using ozone MNBs had a considerable effect on wastewaters that are otherwise difficult to treat using other methods; hence, it is a promising technology for wastewater treatment.

Persulfate Reaction in a Hair-Bleaching Formula: Unveiling the Unconventional Reactivity of 1,13-Diamino-4,7,10-Trioxatridecane

The stability and unconventional reactivity of 1,13‐diamino‐4,7,10‐trioxatridecane in the presence of NH₃, H₂O₂, and (NH₄)₂S₂O₈ are described. The ether‐diamine is an ingredient marketed to hair salons and consumers for so‐called “plex” services to compensate for hair damage during bleaching. The main reaction product identified is an unexpected azanyl ester derivative. This is considered relevant for the safety evaluation when used in cosmetic products. The mechanism of reaction was explored through DFT calculations. This study represents the first attempt to assess the stability of a plex active in an oxidative environment.

Phenol abatement using persulfate activated by nZVI, H2O2 and NaOH and development of a kinetic model for alkaline activation

Three persulfate (PS) activation methods (nanoparticles of zero-valent iron (nZVI), hydrogen peroxide and alkali) were compared using phenol as target pollutant. Firstly, four experiments were conducted at 25°C in a batch way using the same initial phenol and oxidant concentrations (10 mM and 420 mM, respectively), being the molar ratio activator/PS fixed to 0.005 with nZVI (mass ratio 0.0011 nZVI/PS), to 2 using hydrogen peroxide and to 2 and 4 with NaOH. Phenol and PS conversions and aromatic byproducts profiles during 168 h reaction time were measured and compared, as well as mineralization and ecotoxicity of the samples. It was found that both phenol and aromatic byproducts (catechol and hydroquinone) totally disappeared using PS activated by alkali before 24 h, while a significant amount of aromatic intermediates was obtained with nZVI and H₂O₂. Additional runs were carried out using shorter times (0-2 h) to discriminate the oxidation route and the kinetic model of phenol abatement by using PS activated by alkali. Different initial concentrations of phenol (5-15 mM), PS (210 and 420 mM) and molar ratio NaOH/PS (2 and 4) were employed. The kinetic model obtained predicts accurately the evolution of phenol, persulfate, hydroquinone and catechol.

Application of calcium peroxide in water and soil treatment: A review

Calcium peroxide (CP) has been progressively applied in terms of environmental protection due to its certain physical and chemical properties. This review focuses on the latest progresses in the applications of CP in water and soil treatment, including wastewater treatment, surface water restoration and groundwater and soil remediation. The stability of CP makes it an effective solid phase to supply H₂O₂ and O₂ for aerobic biodegradation and chemical degradation of contaminants in water and soil. CP has exerted great performance in the removal of dyes, chlorinated hydrocarbons, petroleum hydrocarbons, pesticides, heavy metals and various other contaminants. The research progress in the encapsulation technologies of CP with other materials and the preparation of CP nanoparticles were also presented in this review. Based on the summarized research progresses, the perspective of CP application in the future was proposed.