Emerging trends in photodegradation of petrochemical wastes: a review

Enhanced visible-light activation of persulfate for the removal of RhB by supported nano-(C,N,B)-tridoped TiO2/copper foam mixed-crystals

Photocatalytic persulfate activation by TiO2 and its application in sewage treatment have aroused great interest because of its high decontamination ability and strong adaptability, but the low light energy utilization rate and poor recycling of TiO2 limited its practical application. Herein, by using C-, N-, and B-modified TiO2 and immobilizing it on copper foam, we prepared a new and efficient (C,N,B)-TiO2/copper foam photocatalyst with enhanced visible-light activation performance of persulfate for the removal of RhB. It almost completely degraded RhB within 15 min of UV-vis light photocatalysis-assisted persulfate oxidation reaction with TOC removal of 53.17% in 30 min and presented the excellent long-term recyclability and stability, which is much better or comparative than those photocatalysts in the related literatures. (C,N,B)-TiO2/copper foam exhibited the largest apparent rate constant (0.149 min-1), 1.16 times higher than (C,N,B)-TiO2 (0.128 min-1), and 2.40 times higher than that of TiO2 (0.062 min-1), respectively. C,N,B doping modified the crystalline phase of TiO2, narrowed its band gap, and reduced charge-carrier recombination rate. These, together with the synergistic effect between photocatalysis and persulfate activation for enhancing generation of active species, jointly promoted the performance enhancement of TiO2. The 1O2 was the primary oxidation active species for the degradation of RhB, and the radical species (SO4•-, •O2-, and •OH) could further accelerate the photocatalytic activation of persulfate reaction.

An overview of in situ remediation for groundwater co-contaminated with heavy metals and petroleum hydrocarbons

Groundwater is an important component of water resources. Mixed pollutants comprising heavy metals (HMs) and petroleum hydrocarbons (PHs) from industrial activities can contaminate groundwater through such processes as rainfall infiltration, runoff and discharge, which pose direct threats to human health through the food chain or drinking water. In situ remediation of contaminated groundwater is an important way to improve the quality of a water environment, develop water resources and ensure the safety of drinking water. Bioremediation and permeable reactive barriers (PRBs) were discussed in this paper as they were effective and affordable for in situ remediation of complex contaminated groundwater. In addition, media types, technology combinations and factors for the PRBs were highlighted. Finally, insights and outlooks were presented for in situ remediation technologies for complex groundwater contaminated with HMs and PHs. The selection of an in situ remediation technology should be site specific. The remediation of complex contaminated groundwater can be approached from various perspectives, including the development of economical materials, the production of slow-release and encapsulated materials, and a combination of multiple technologies. This review is expected to provide technical guidance and assistance for in situ remediation of complex contaminated groundwater.

Recent advances of modification effect in Co3O4-based catalyst towards highly efficient photocatalysis

Tricobalt tetroxide (Co3O4) has been developed as a promising photocatalyst material for various applications. Several reports have been published on the self-modification of Co3O4 to achieve optimal photocatalytic performance. The pristine Co3O4 alone is inadequate for photocatalysis due to the rapid recombination process of photogenerated (PG) charge carriers. The modification of Co3O4 can be extended through the introduction of doping elements, incorporation of supporting materials, surface functionalization, metal loading, and combination with other photocatalysts. The addition of doping elements and support materials may enhance the photocatalysis process, although these modifications have a slight effect on decreasing the recombination process of PG charge carriers. On the other hand, combining Co3O4 with other semiconductors results in a different PG charge carrier mechanism, leading to a decrease in the recombination process and an increase in photocatalytic activity. Therefore, this work discusses recent modifications of Co3O4 and their effects on its photocatalytic performance. Additionally, the modification effects, such as enhanced surface area, generation of oxygen vacancies, tuning the band gap, and formation of heterojunctions, are reviewed to demonstrate the feasibility of separating PG charge carriers. Finally, the formation and mechanism of these modification effects are also reviewed based on theoretical and experimental approaches to validate their formation and the transfer process of charge carriers.

On the reactions of Cu(II/I)ATP complexes with methyl radicals

The Cu^I/IIATP react with methyl radicals to form methane and methanol, where Cu^IATP reacts with ^•CH₃ in a process that is surprisingly slow. The low-rate constant of this process is attributed to the significant rearrangement of the chelating ligand required for the transient's formation. These results were corroborated by DFT calculations of the relevant compounds.

Photocatalytic Degradation of Recalcitrant Pollutants of Greywater

These days, many countries have a water shortage and have limited access to clean water. To overcome this, a new treatment is emerging, namely, the photocatalytic processing of greywater. Photocatalytic processes to remove the organic matter from different greywater sources are critically reviewed. Their efficiency in degrading the organic matter in greywater is scrutinized along with factors that can affect the activity of photocatalysts. Modified TiO2, ZnO and TiO2 catalysts show great potential in degrading organic materials that are present in greywater. There are several methods that can be used to modify TiO2 by using sol-gel, microwave and ultrasonication. Overall, the photocatalytic approach alone is not efficient in mineralizing the organic compounds, but it works well when the photocatalysis is combined with oxidants and Fe3+. However, factors such as pH, concentration and catalyst-loading of organic compounds can significantly affect photocatalytic efficiency.

The Formation, Stabilization and Separation of Oil–Water Emulsions: A Review

Oil–water emulsions are widely generated in industries, which may facilitate some processes (e.g., transportation of heavy oil, storage of milk, synthesis of chemicals or materials, etc.) or lead to serious upgrading or environmental issues (e.g., pipeline plugging, corrosions to equipment, water pollution, soil pollution, etc.). Herein, the sources, classification, formation, stabilization, and separation of oil–water emulsions are systematically summarized. The roles of different interfacially active materials–especially the fine particles–in stabilizing the emulsions have been discussed. The advanced development of micro force measurement technologies for oil–water emulsion investigation has also been presented. To provide insights for future industrial application, the separation of oil–water emulsions by different methods are summarized, as well as the introduction of some industrial equipment and advanced combined processes. The gaps between some demulsification processes and industrial applications are also touched upon. Finally, the development perspectives of oil–water treatment technology are discussed for the purpose of achieving high-efficiency, energy-saving, and multi-functional treatment. We hope this review could bring forward the challenges and opportunities for future research in the fields of petroleum production, coal production, iron making, and environmental protection, etc.

Reactions of methyl, hydroxyl and peroxyl radicals with the DOTA chelating agent used in medical imaging

The mechanism of reaction of DOTA (1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid) with ·CH₃, CH₃O₂· and ·OH radicals were studied. The radicals were formed in situ radiolytically. The methyl radicals react orders of magnitude slower with DOTA and with M^III(DOTA)^- than the hydroxyl radicals. The various final products were identified and mechanisms for their formation are proposed. CH₃O₂· radicals do not react, or react too slowly to be observed, with DOTA and with M^III(DOTA)^- as long as the central cation is not oxidized by the peroxyl radical. The results imply that synthesis of the M^III(DOTA)^-(M^III = radioisotope) complexes in a water-organic solvent (ethanol or 2-propanol or acetonitrile) mixture is not only kinetically desired but the so formed complex also decreases the radiolytic decomposition of DOTA.

Titanium Dioxide-Based Photocatalysts for Degradation of Emerging Contaminants including Pharmaceutical Pollutants

Contamination of the environment has been a growing problem in recent years. Due to the rapid growth in human population, the expansion of cities, along with the development of industry, more and more dangerous chemicals end up in the environment, especially in soil and water. For the most part, it is not possible to effectively remove chemicals through traditional remediation techniques, because those used in treatment plants are not specifically designed for this purpose. Therefore, new approaches for water remediation are in great demand. Many efforts have been focused on applications of photocatalysis for the remediation of chemical pollutants including drugs. Titanium(IV) oxide nanoparticles have particularly been considered as potential photocatalysts due to their favorable properties. In this article, we present the problem of emerging contaminants including drugs and discuss the use of photocatalysts based on titanium(IV) oxide nanoparticles for their degradation. A wide selection of materials, starting from bare TiO2, via its hybrid and composite materials, are discussed including those based on carbonaceous materials or connections with macrocyclic structures. Examples of photodegradation experiments on TiO2-based materials including those performed with various active pharmaceutical ingredients are also included.

Degradations of endocrine-disrupting chemicals and pharmaceutical compounds in wastewater with carbon-based nanomaterials: a critical review

Although water occupies 75% of the earth's surface, only 0.0067% of the total water is available for human activities. These statistics further decline with the population growth and consequent multiplication in the amount of annual waste produced. The demand for clean and safe drinking water has always been a prime concern in the global scenario. Among various types of waste materials, endocrine-disrupting chemicals (EDCs) and pharmaceutical effluents have become a constant threat to the aquatic ecosystem and possess challenges worldwide. Endocrine-disrupting chemicals (EDCs) are a mixed group of emerging concern chemicals with the ability to mimic the mechanisms of biosynthesis, transport, and metabolism of hormones. These chemicals pose various health threats such as early puberty, infertility, obesity, diabetes, reproductive disorders, cancerous tumors, and related disorders (immune cells, hormones' activity, and various organs). On the other hand, pharmaceutical compounds such as antibiotics also harm the natural environment, human health, and soil microbiology. Their low concentration, ranging from a few ng/L to μg/L, gives rise to a micro-pollution phenomenon, which makes it difficult to detect, analyze, and degrade in wastewater treatment plants. Activated carbons (ACs) and other adsorbents, including naturally occurring materials (wood, keratin) are considered as nanomaterials (NMs) reference for the separation of organic pollutants. It is generally acknowledged that mass-transfer phenomena control sorption kinetics at the liquid/solid interface, with retention controlled by the sorbent/sorbate properties. Therefore, the type of interaction (strong or weak van der Waals forces) and the hydrophilic/hydrophobic properties of the adsorbent are two crucial factors. Besides, EDCs and pharmaceutical compound sorption on such kinds of nanoporous solids depend on both the molecule size and charge density. The applications of nanomaterials on non-conservative methods, like advanced oxidation processes or AOPs (e.g., photocatalysis and Fenton reaction), are contemplated as more apt in comparison to conservative technology like reverse osmosis nanofiltration, and adsorption, etc. One of the reasons is that AOPs generate free radicals (hydroxyls), which are strong oxidants for the demineralization of organic compounds and the extreme case that hydroxyl radicals can attack any kinds of pollutants with the generation of only water and carbon dioxide as final products. AOPs may imply the use of NMs as either catalysts or photocatalysts, which improve the selective removal of the target pollutant. Therefore, various literature reviews have revealed that there is a timely need to upgrade the efficiency of the remediation approaches to protect the environment against EDCs and pharmaceuticals adequately. There is currently a lack of definitive risk assessment tools due to their complicated detection and associated insufficiency in the health risk database. Hence, our present review focuses on applying carbon-based nanomaterials to remove EDCs and pharmaceuticals from aqueous systems. The paper covers the effect of these pollutants and photocatalytic methods for treating these compounds in wastewater, along with their limitations and challenges, plausible solutions, and prospects of such techniques.

Application of polyamide thin-film composite layered on polysulfone-GO/TiO2 mixed matrix membranes for removal of nitrotoluene derivatives from petrochemical wastewaters

Release of harmful organic intermediates or byproducts during the manufacture of petrochemical compounds is a serious problem in petrochemical plants. In this work, polysulfone membranes blended with GO/TiO₂ nanocomposite were synthesized by phase inversion method and coated with a polyamide layer formed by interfacial polymerization to prepare a thin-film composite (TFC) sample. Analysis and characterization of the sample were carried out by XRD, FE-SEM, BET, FTIR/ATR, AFM, TGA, and zeta potential. Results indicated that incorporation of GO/TiO₂ into the membrane structure enhanced porosity, surface roughness, and macrovoid formation along the cross-section of the sublayer and permeability of the membrane. The TFC membranes were applied to remove mononitrotoluene (MNT) and dinitrotoluene (DNT) as the basic intermediates of toluene diisocyanate (TDI). The membranes demonstrated high efficiency (> 90%) for the removal of MNT and DNT according to the charge exclusion mechanism and Donnan effect. Application of the TFC membrane for treatment of wastewater in the TDI plant showed that the removal of pollutants is variable in the range of 45-65% and 53-69% for the membrane with the highest flux and highest rejection in different transmembrane pressure, respectively.

Tetracycline Photocatalytic Degradation under CdS Treatment

Industrialization and the growing consumption of medicines leads to global aquatic contamination. One of the antibiotics widely used against bacterial infections in both human and veterinary medicine is tetracycline. Despite its positive antibiotic action, tetracycline is resistant against degradation, and therefore it accumulates in the environment, including the aquatic environment, creating great health hazards, possibly stimulating antibiotic resistance of pathogenic organisms. In this research, aqueous suspensions of semiconductor nanoparticles CdS were used for photocatalytic activity studies in the presence of methylene blue as a model compound, and finally, in the presence of tetracycline, a broad-spectrum antibiotic widely used against bacterial infections, as well as a live-stock food additive. The mechanism and kinetic rate constants of photocatalytic degradation processes of methylene blue and tetracycline were described in correlation with the energy diagram of CdS nanoparticles.

Galvanic Replacement-Enabled Synthesis of In(OH)3/Ag/C Nanocomposite as an Effective Photocatalyst for Ultraviolet C Degradation of Methylene Blue

Sub-10 nm indium metal nanoparticles (In NPs) stabilized on conductive carbon were reacted with silver nitrate in dark conditions in water at room temperature in a galvanic replacement manner to produce an indium hydroxide/silver/carbon nanocomposite (In(OH)3/Ag/C). The chosen carbon imparted colloidal stability, high surface area, and water dispersibility suitable for photodegradation of harmful dyes in water. The size and shape of indium hydroxide and silver nanoparticles produced were found to be 6.6 ± 0.9 nm, similar to that of the In NPs that were started with. The nanocomposite was characterized by transmission electron microscopy, energy dispersive X-ray spectroscopy, powder X-ray diffraction, and thermogravimetric analysis. The galvanic reaction between In NPs and silver nitrate was tracked with UV-vis spectroscopy in a control experiment without a carbon substrate to confirm that the reaction was indeed thermodynamically spontaneous as indicated by the positive electromotive force (EMF) of +1.14 V calculated for In/Ag+ redox couple. The photocatalytic performance of the nanocomposite was evaluated to be approximately 90% under UVC radiation when 10 ppm of methylene blue and 13 wt % of indium hydroxide/silver loading on carbon were used.

Biodegradation of aromatic hydrocarbons using microbial adsorbed bioreactor

Polyurethane (PU) tubular coil-based bioreactor was constructed and evaluated for the effective biodegradation of benzene, toluene, xylene and phenol (BTXP). Herein, the removal of BTXP was done with a formulated bacterial consortium adsorbed on the inner surface of the PU coil. The formulated consortium consisted of four bacterial strains namely, Alcaligenes sp. d ₂ , Enterobacter aerogenes, Raoultella sp. and Bacillus megaterium. The adsorption ability of the bacterial cells onto the coil surface was assessed by spectrophotometric and Scanning Electron Microscopic (SEM) analysis. BTXP degradation performance was evaluated by Ultra-Violet spectroscopy and the degradation was confirmed by Fourier Transform Infrared Spectroscopy (FT/IR). The bioreactor constructed using polyurethane (PU) tubular coil with adsorbed bacterial cells exhibited 70% degradation capacity of 250 µL of 5% benzene, toluene, xylene and phenol (BTXP) at a pH of 6 within 8 h of treatment. FT/IR spectra of the treated sample indicated the production of ketonic, carboxylic acid/esters during biodegradation. The innovative technology proposed in the current study with the formulated bacterial consortium and the novel bioreactor opens up new possibilities for the better removal of BTXP mixture from contaminated sites and industrial effluents.

Petroleum Hydrocarbon Removal from Wastewaters: A Review

Oil pollutants, due to their toxicity, mutagenicity, and carcinogenicity, are considered a serious threat to human health and the environment. Petroleum hydrocarbons compounds, for instance, benzene, toluene, ethylbenzene, xylene, are among the natural compounds of crude oil and petrol and are often found in surface and underground water as a result of industrial activities, especially the handling of petrochemicals, reservoir leakage or inappropriate waste disposal processes. Methods based on the conventional wastewater treatment processes are not able to effectively eliminate oil compounds, and the high concentrations of these pollutants, as well as active sludge, may affect the activities and normal efficiency of the refinery. The methods of removal should not involve the production of harmful secondary pollutants in addition to wastewater at the level allowed for discharge into the environment. The output of sewage filtration by coagulation and dissolved air flotation (DAF) flocculation can be transferred to a biological reactor for further purification. Advanced coagulation methods such as electrocoagulation and flocculation are more advanced than conventional physical and chemical methods, but the major disadvantages are the production of large quantities of dangerous sludge that is unrecoverable and often repelled. Physical separation methods can be used to isolate large quantities of petroleum compounds, and, in some cases, these compounds can be recycled with a number of processes. The great disadvantage of these methods is the high demand for energy and the high number of blockages and clogging of a number of tools and equipment used in this process. Third-party refinement can further meet the objective of water reuse using methods such as nano-filtration, reverse osmosis, and advanced oxidation. Adsorption is an emergency technology that can be applied using minerals and excellent materials using low-cost materials and adsorbents. By combining the adsorption process with one of the advanced methods, in addition to lower sludge production, the process cost can also be reduced.

Monetary valuation of salicylic acid, methylparaben and THCOOH in a Mediterranean coastal wetland through the shadow prices methodology

The presence of pharmaceutical and personal care products and drugs of abuse (PPCPs) in wastewater treatment plants (WWTPs) indicates discharge of the effluent may not be suitable for the ecological balance of water ecosystems, such as wetlands. These PPCPs degrade water quality, considered as an ecosystem service (ES), provoking serious environmental impacts. Assessing the monetary value of PPCPs can be used as a proxy for environmental status of the ES of water quality (ESWQ). Considering PPCPs as non-desirable outputs of WWTPs, the shadow prices methodology has been implemented using directional distance function to measure the environmental avoided cost of removing salicylic acid (SA), methylparaben (MP), and THCOOH from WWTPs effluents discharged to Albufera Natural Park (Spain). The SA shows the highest shadow price (138.16 €/μg), followed by THCOOH (48.15 €/μg), and MP (30.66 €/μg). These values are interpreted as the environmental cost that would be avoided if SA, MP, and THCOOH were removed from WWTPs effluents. The non-parametric tests show that wastewater treatment technology, together with population equivalent (as a proxy of the size of urban areas) and seasonality are factors that influence shadow prices obtained. The approach used in this study highlights the use of PPCPs as status indicators of ESWQ quantified in monetary units. As a way to synthesize the essential concepts to implement the shadow prices approach, this study proposes a flow diagram to represent the relationship between all the factors involved in this work. The use of shadow prices methodology proves that removing SA, MP, and THCOOH is associated with a measurable improvement in the ESWQ of Albufera Natural Park. The findings of this study will be useful for plant managers in order to make decisions about the removal of PPCPs in WWTPs effluents.