Geochemical behavior of ultramafic waste rocks with carbon sequestration potential: a case study of the Dumont Nickel Project, Amos, Québec

The Mining Industry's Role in Enhanced Weathering and Mineralization for CO2 Removal

Enhanced weathering and mineralization (EWM) aim to remove carbon dioxide (CO2) from the atmosphere by accelerating the reaction of this greenhouse gas with alkaline minerals. This suite of geochemical negative emissions technologies has the potential to achieve CO2 removal rates of >1 gigatonne per year, yet will require gigatonnes of suitable rock. As a supplier of rock powder, the mining industry will be at the epicenter of the global implementation of EWM. Certain alkaline mine wastes sequester CO2 under conventional mining conditions, which should be quantified across the industry. Furthermore, mines are ideal locations for testing acceleration strategies since tailings impoundments are contained and highly monitored. While some environmentally benign mine wastes may be repurposed for off-site use─reducing costs and risks associated with their storage─numerous new mines will be needed to supply rock powders to reach the gigatonne scale. Large-scale EWM pilots with mining companies are required to progress technology readiness, including carbon verification approaches. With its knowledge of geological formations and ore processing, the mining industry can play an essential role in extracting the most reactive rocks with the greatest CO2 removal capacities, creating supply chains, and participating in life-cycle assessments. The motivations for mining companies to develop EWM include reputational benefits and carbon offsets needed to achieve carbon neutrality.

Mineralogical and chemical characterization of mining waste and utilization for carbon sequestration through mineral carbonation

Mining activities have often been associated with the issues of waste generation, while mining is considered a carbon-intensive industry that contributes to the increasing carbon dioxide emission to the atmosphere. This study attempts to evaluate the potential of reusing mining waste as feedstock material for carbon dioxide sequestration through mineral carbonation. Characterization of mining waste was performed for limestone, gold and iron mine waste, which includes physical, mineralogical, chemical and morphological analyses that determine its potential for carbon sequestration. The samples were characterized as having alkaline pH (7.1-8.3) and contain fine particles, which are important to facilitate precipitation of divalent cations. High amount of cations (CaO, MgO and Fe2O3) was found in limestone and iron mine waste, i.e., total of 79.55% and 71.31%, respectively, that are essential for carbonation process. Potential Ca/Mg/Fe silicates, oxides and carbonates have been identified, which was confirmed by the microstructure analysis. The limestone waste composed majorly of CaO (75.83%), which was mainly originated from calcite and akermanite minerals. The iron mine waste consisted of Fe2O3 (56.60%), mainly from magnetite and hematite, and CaO (10.74%) which was derived from anorthite, wollastonite and diopside. The gold mine waste was attributed to a lower cation content (total of 7.71%), associated mainly with mineral illite and chlorite-serpentine. The average capacity for carbon sequestration was between 7.73 and79.55%, which corresponds to 383.41 g, 94.85 g and 4.72 g CO2 that were potentially sequestered per kg of limestone, iron and gold mine waste, respectively. Therefore, it has been learned that the mine waste might be utilized as feedstock for mineral carbonation due to the availability of reactive silicate/oxide/carbonate minerals. Utilization of mine waste would be beneficial in light of waste restoration in most mining sites while tackling the issues of CO2 emission in mitigating the global climate change.

Carbonation, Cementation, and Stabilization of Ultramafic Mine Tailings

Tailings dam failures can cause devastation to the environment, loss of human life, and require expensive remediation. A promising approach for de-risking brucite-bearing ultramafic tailings is in situ cementation via carbon dioxide (CO₂) mineralization, which also sequesters this greenhouse gas within carbonate minerals. In cylindrical test experiments, brucite [Mg(OH)₂] carbonation was accelerated by coupling organic and inorganic carbon cycling. Waste organics generated CO₂ concentrations similar to that of flue gas (up to 19%). The abundance of brucite (2-10 wt %) had the greatest influence on tailings cementation as evidenced by the increase in total inorganic carbon (TIC; +0.17-0.84%). Brucite consumption ranged from 64-84% of its initial abundance and was mainly influenced by water availability. Higher moisture contents (e.g., 80% saturation) and finer grain sizes (e.g., clay-silt) that allowed for a better distribution of water resulted in greater brucite carbonation. Furthermore, pore clogging and surface passivation by Mg-carbonates may have slowed brucite carbonation over the 10 weeks. Unconfined compressive strengths ranged from 0.4-6.9 MPa and would be sufficient in most scenarios to adequately stabilize tailings. Our study demonstrates the potential for stabilizing brucite-bearing mine tailings through in situ cementation while sequestering CO₂.

Aqueous mineral carbonation of ultramafic material: a pre-requisite to integrate into mineral extraction and tailings management operation

Ex situ aqueous mineral carbonation of ultramafic mining waste is an evolving technology for the CO₂ sequestration from small- to medium-scale emitters. The mineral ores or mine wastes of associated ultramafic mineralogy are a suitable feedstock for mineral carbonation. The aqueous mineral carbonation at ambient temperature is motivating and attractive from an energy-saving perspective. This study has investigated the CO₂ sequestration potential of a locally available ultramafic material generated from a nickel ore mine with a futuristic scope of integrating the method into an ongoing mineral extraction and/or tailing management operation. The mineral characterization and experimental results indicate that the tested material has CO₂ sequestration potential and underwent carbonation at ambient temperature. The carbonate conversion efficiencies obtained for Ca and Mg from the dissolved ionic forms at optimum conditions are 60% and 25%, respectively. The material was able to sequestrate about 0.12 gCO₂ per g solid at this efficiency. Aragonite and hydromagnesite are the major products that evolved out from the aqueous carbonation. Based on the mineral carbonation results, the novel concept of integrating the evolved method to existing mineral extraction and/or tailings management operation is discussed.

Atmospheric Carbon Mineralization in an Industrial-Scale Chrysotile Mining Waste Pile

Magnesium-rich minerals that are abundant in ultramafic mining waste have the potential to be used as a safe and permanent sequestration solution for carbon dioxide (CO₂). Our understanding of thermo-hydro-chemical regimes that govern this reaction at an industrial scale, however, has remained an important challenge to its widespread implementation. Through a year-long monitoring experiment performed at a 110 Mt chrysotile waste pile, we have documented the existence of two distinct thermo-hydro-chemical regimes that control the ingress of CO₂ and the subsequent mineral carbonation of the waste. The experimental results are supported by a coupled free-air/porous media numerical flow and transport model that provides insights into optimization strategies to increase the efficiency of mineral sequestration at an industrial scale. Although functioning passively under less-than-optimal conditions compared to laboratory-scale experiments, the 110 Mt Thetford Mines pile is nevertheless estimated to be sequestering up to 100 tonnes of CO₂ per year, with a potential total carbon capture capacity under optimal conditions of 3 Mt. Annually, more than 100 Mt of ultramafic mine waste suitable for mineral carbonation is generated by the global mining industry. Our results show that this waste material could become a safe and permanent carbon sink for diffuse sources of CO₂.