Spatial variation of PAHs and PCBs in coastal air, seawater, and sediments in a heavily industrialized region

Spatial distribution, sources identification, and health risk assessment polycyclic aromatic hydrocarbon compounds and polychlorinated biphenyl compounds in total suspended particulates (TSP) in the air of South Pars Industrial region-Iran

South Pars Industrial Energy Zone, located in the southwest of Iran along the Persian Gulf coast, encompasses many industrial units in the vicinity of urban areas. This research study investigated the effects of polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) on human health and the environment. Suspended particulate matters (SPM) in the air sampled, in summer and winter 2019, from ten stations next to industrial units and residential areas. The samples were analyzed by gas chromatography-mass spectrometry (GC-MS). Spatial distribution maps of pollutants in the region were prepared using GIS software. The highest carcinogenic risk due to PAHs and PCBs measured as ([Formula: see text]) and ([Formula: see text], respectively. According to the US Environmental Protection Agency limit ([Formula: see text]), the cancer risks from PAH compounds were significant and need further investigation. The PCB cancer risks were within acceptable ranges. The highest adsorption ratios for PAHs were obtained through skin and PCBs by ingestion. The maximum measured non-carcinogenic hazard indexes (HI) turned out to be 0.037 and 0.023 for PAH and PCB, respectively, and were reported as acceptable risks. The predominant source of PAH in industrial areas was liquid fossil combustion, and in urban areas replaced by coal-wood-sugarcane combustion. Petrochemical complexes, flares, power plants (69%), electric waste disposal sites, and commercial pigments (31%) were reported as PCB sources. Industries activities were the most effective factors in producing the highest level of carcinogenic compounds in the region, and it is necessary to include essential measures in the reform programs.

Research progress of the POP fugacity model: a bibliometrics-based analysis

With the emergence of environmental issues regarding persistent organic pollutants (POPs), fugacity models have been widely used in the concentration prediction and exposure assessment of POPs. Based on 778 relevant research articles published between 1979 and 2020 in the Web of Science Core Collection (WOSCC), the current research progress of the fugacity model on predicting the fate and transportation of POPs in the environment was analyzed by CiteSpace software. The results showed that the research subject has low interdisciplinarity, mainly involving environmental science and environmental engineering. The USA was the most paper-published country, followed by Canada and China. The publications of the Chinese Academy of Sciences, Lancaster University, and Environment Canada were leading. Collaboration between institutions was inactive and low intensity. Keyword co-occurrence analysis showed that polychlorinated biphenyls, organochlorine pesticides, and polycyclic aromatic hydrocarbons were the most concerning compounds, while air, water, soil, and sediment were the most concerning environmental media. Through co-citation cluster analysis, in addition to the in-depth exploration of traditional POPs, research on emerging POPs such as cyclic volatile methyl siloxane and dechlorane plus were new research frontiers. The distribution and transfer of POPs in the soil-air environment have attracted the most attention, and the regional grid model based on fugacity has been gradually improved and developed. The co-citation high-burst detection showed that the research hotspots gradually shifted from pollutant persistence and long-range transport potential to pollutant distribution rules among the different environmental media and the long-distance transmission simulation.

Distribution, source finding, ecological hazard assessment, and water-sediment exchange rate of polychlorinated biphenyl (PCB) congeners in South Pars Industrial Zone, Iran

South Pars Industrial Zone is located near an Assaluyeh city on the coast of the Persian Gulf and is known as the energy capital of Iran. In this study, environmental and health effects due to PCB congeners had an assessment. In this study, 10 air stations, 10 seawater, and sediments stations were systematically selected and sampled in two seasons. Air, seawater, and sediment pollution made by polychlorinated biphenyls (PCBs) were evaluated. Seawater-sediment exchange conditions using the fugacity coefficient reviewed. PCB levels in marine sediments, seawater, and air based on the analysis of the obtained data were 107.33-172.92 ng/g, ND-135.68 ng/L, and ND-4.4 ng/m³, respectively. The highest concentration was observed in the vicinity of refineries, petrochemicals, and petroleum export facilities. These values had increased significantly compared to values of studies, conducted in similar areas. The sources were electrical wastes, storage sites, power generation units, and wastewater treatment. The ecological risk of seawater was assessed to be low to high, while sediment risks were reported with a low to moderate risk range. In 70% of the stations, the predominant transfer was from sediments to seawater; sediments were in fact the secondary source of seawater pollution. It is suggested for the area to be continuously monitored, while engineering and management measures should be adopted to improve the situation and also prevent the spread of pollution.

Fugacity-based analysis of polycyclic aromatic hydrocarbon pollution in Izmit Bay, Turkey: An analytical framework for assessment with limited data

An analytical framework was proposed for analyzing long-term chemical pollution in a coastal region with limited environmental data. The framework consists of compiling and synthesizing the available knowledge including the chemical's properties and the environmentally relevant data, as well as the data obtained by past monitoring studies. The gathered data is analyzed to assess multimedia fate of the pollutant by using fugacity-based intermedia transport calculations. Uncertainty analysis by applying Monte Carlo simulations is an integrated part of the framework. Dispersion factor (k) values were adopted, enabling a unified and intuitive way to define lognormal uncertainty distributions. The proposed framework was applied to polycyclic aromatic hydrocarbon (PAH) pollution in Izmit Bay, a coastal region in Turkey, impacted by industrialization and population growth. The analysis showed the importance of atmospheric pollution as a PAH source and indicated that Izmit Bay sediments may be at steady state for most PAHs.

An Advanced PMF Model Based on Degradation Process for Pollutant Apportionment in Coastal Areas

With increasing stress posed to the marine ecosystem and coastal communities, prevention and control of coastal pollution becomes urgent and important, in which the identification of pollution sources is essential. Currently, the pollutant source apportionment in coastal areas is mainly based on receptor models, such as the positive matrix factorization (PMF) model. Nevertheless, these models still lack consideration of the changes of pollutant behaviors (e.g., the degradation of pollutants) which cause the differences in pollutant compositions. Subsequently, the source apportionment via receptor models only based on the monitoring data may not be consistent with the one in pollution sources. To fill this gap, a pollutant degradation model was firstly developed in this study. Accordingly, the degradation model was inversed to estimate the pollutant concentrations at their emitting sources, based on the monitoring concentration in the coastal area. Finally, the estimated concentrations were fed to the PMF model for pollutant source apportionment, advancing the PMF model with degradation process. To demonstrate the feasibility and accuracy of the developed model, a case study of source appointment was carried out based on the polycyclic aromatic hydrocarbons (PAHs) in the sediments of the Pearl River Estuary. The results indicated the same types of emission source identified by the original and advanced PMF models, which were oil spill, biomass and coal combustion, and traffic emission. Nevertheless, the contributions of sources were significantly varied between the two models. According to the analyses based on emission inventory, the offsets of the results from the original PMF model were −55.4%, 22.7%, and 42.2% for the emission sources of oil spill, biomass and coal combustion, and traffic emission, respectively. Comparatively, the offsets for the advanced PMF model narrowed down to −27.5%, 18.4%, and −4.4%. Therefore, the advanced PMF model is able to provide satisfactory source apportionment for organic pollutants in coastal areas, and thus further provide a scientific basis for marine pollution prevention and control.

Multicompartmental analysis of POPs and PAHs in Concepciόn Bay, central Chile: Part II - Air-sea exchange during Austral summer

Air-sea exchange of POPs and PAHs was assessed in Concepción Bay during January, summer 2015. Results showed low levels, in air and water, for POPs (1-20 pg m^-3, and 6-50 pg L^-1, respectively) and for ΣPAHs (1-2 ng m^-3 and 1-2 ng L^-1, respectively). The highest levels were found for PBDEs (200-20,000 pg L^-1) in the water samples (3-fold times higher than PCBs and OCP) and PBDE209 accounted for 90% of total ΣPBDEs. Air-sea exchange fluxes (ng m^-2 d^-1) were low in general, with exception of PBDEs showing values up to 40,000 ng m^-2 d^-1. Net deposition was found for PAHs, HCB and some PBDEs; while, BDE99, and BDE100 showed net volatilization. These findings contribute with new data of diffusive air-sea exchange on the southern hemisphere Pacific coast.

Polycyclic Aromatic Hydrocarbons and Polychlorinated Biphenyls in Seawater, Sediment and Biota of Neritic Ecosystems: Occurrence and Partition Study in Southern Ligurian Sea

The Mediterranean Sea is subjected to a high anthropic pressure, which determines direct or indirect discharges of persistent organic pollutants deriving from intensive industrial activities. These compounds could easily enter and contaminate the whole marine compartment, with possible transfers (and contamination) among water, sediment and biota. Based on the above-mentioned assumptions, in this work we studied the presence of 16 polycyclic aromatic hydrocarbons (PAHs) and 14 dioxin and non-dioxin-like polychlorinated biphenyls (PCBs) in the neritic protected marine area of the Southern Ligurian Sea, affected by the impact of human activities. The study was focused on the possible partition of micropollutants within seawater, sediment and zooplankton. Results showed that both seasonal and anthropic causes strongly affect contaminant transfer behaviors, with summertime periods more impacted by PAH and PCB contamination. Regarding the PAH contamination, low molecular weight congeners were mainly detected in the target matrices, revealing concentrations up to 1 µg/L in seawater (anthracene), 250 µg/Kg in sediments (benzo[b]fluoranthene) and 2.3 mg/Kg in carnivorous copepods. Concerning PCBs, only few congeners were detected in the matrices studied. To better understand the occurrence of preferential bioaccumulation pathways in zooplankton, partition studies were also performed in several taxa (hyperbenthic Isopoda, holoplanktonic crustacean copepods and ichthyoplankton) through the calculation of BAF values, observing that both living and feeding habits could influence the bioaccumulation process.

Interaction between polychlorinated biphenyls and dissolved organic matter of different molecular weights from natural and anthropic sources

Polychlorinated biphenyls (PCBs) are compounds of significant interest due to high toxicity, persistence, long-range atmospheric transport, and bioaccumulation. These compounds can interact with components present in the environment, including dissolved organic matter (DOM) in soils and waters, thereby modifying its availability and movement. In this study, DOM was fractionated by ultrafiltration and characterized according to its hydrophobicity and hydrophilicity, then the interaction of a series of PCBs and different DOM fractions was evaluated. The DOM was collected from the surface waters of three sectors located along a river in the southern part of America. These sectors are subject to different anthropic activities, thus the DOM of sector 1, with the least anthropic influence, was mainly hydrophobic and with a high content of aromatic structures. In contrast, the DOM collected from sectors 2 and 3, where anthropic activity is highest, was slightly hydrophobic and hydrophilic, respectively. The DOM of these two sectors was mainly composed of low molecular weight macromolecules. These results revealed that more hydrophobic PCBs (i.e., 101, 118, 138, and 180) have a greater affinity to DOM with a higher molecular weight (i.e., >1 kDa). In turn, PCBs with lesser chlorination and hydrophobicity presented a greater affinity to DOM with a lower molecular weight. In conclusion, our study shows that the high molecular weight DOM is responsible for mobilizing PCBs with a high degree of chlorination.

Temporal-spatial survey of PAHs and PCBs in the Atlantic Iberian northwest coastline, and evaluation of their sources and risks for both humans and aquatic organisms

Herein, sixteen priority sixteen priority polycyclic aromatic hydrocarbons (PAHs) and seven polychlorinated biphenyls (PCBs), considered seawater quality indicators, were quantified in four beaches of the Iberian (Portuguese) northwest coastline, including one ornithological reserve. These seashores are close to an important industrial region and a harbour. Water samples were extracted for PAHs and PCBs in their aqueous phase (DAP) and suspended particulate matter (SPM) and analysed by GC-MS/MS. Annual average concentrations reached ∼8 ng/L (DAP) and ∼100 ng/g dw (SPM) for PAHs and ∼3 ng/L (DAP) and ∼19 ng/g dw (SPM) for PCBs. PAHs and PCBs had fluctuations suggestive of seasonality. The possible origins of PAHs point to pyrogenic (forest fires) and petrogenic activities linked to maritime transports. The source(s) of PCBs appear to be related with leaks from waste sorting centres located in the vicinity of the sampling sites, together with the burning of contaminated materials. Toxic equivalents (TEQs) suggested a low carcinogenic potential for PAHs in seawater samples (∼0.3 ng/L and ∼4 ng/g dw, for DAP and SPM). Evaluation of risk coefficients for Σ16 PAHs revealed "Low-risk" of both matrices in all sampling areas. PCBs thyroid toxicity equivalents (TEQs-TH), suggested a low impact on biota (∼7.0E-05 ng/L and ∼5.2E-04 ng/g dw, for DAP and SPM). However, in vivo acute assays with Artemia salina exposed to environmental concentrations of PAHs, PCBs, and mixtures, confirmed the theoretical approach, showing that this coastline is not "Risk-free". This fact calls for further toxicological approaches to fully understand the risks posed by these compounds locally.

Generation and application of a Tg(cyp1a:egfp) transgenic marine medaka (Oryzias melastigma) line as an in vivo assay to sensitively detect dioxin-like compounds in the environment

Large-range environmental pollution by dioxin and dioxin-like compounds (DLCs) is becoming a serious problem. To establish an in vivo method for the detection of DLCs in seawater, a Tg(cyp1a-12DRE:egfp) transgenic marine medaka (Oryzias melastigma) line was first developed with the modified cyp1a-12DRE promoter driving enhanced green fluorescent protein (EGFP) expression using Tol2 transgenesis technology. With increasing concentrations of 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD), polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs), the EGFP fluorescence intensity increased significantly. The Tg(cyp1a-12DRE:egfp) medaka possessed high sensitivity (limit of detection of 1 ng/L TCDD) and specificity and low background. This transgenic line is capable of detecting DLCs in environmental seawater in which the concentration of DLCs is at least 0.12207 ng/L TCDD after sample enrichment. The fluorescence-toxic equivalency (TEQ) values from EGFP intensity were closely correlated with the chemical-TEQ values obtained from chemical analyses. Furthermore, the Tg(cyp1a-12DRE:egfp) medaka can directly detect DLCs in seawater samples after a serious pollution accident and screen unknown aryl hydrocarbon receptor (AhR) agonists for risk assessment. For the first time, a convenient method has been established that sensitively and specifically responds to DLCs using the Tg(cyp1a-12DRE:egfp) marine medaka, which could be a highly efficient tool for detecting seawater DLCs in the future.

Using multi-integrated biomarker indexes approach to assess marine quality and health status of marine organism: a case study of Ruditapes philippinarum in Laizhou Bay, China

With the progress of technology and the deepening of understanding of biological monitoring, much more attention has been paid to the multiple evaluation of marine pollution monitoring. In view of this, our study aimed at establishing a multi-integrated biomarker indexes approach to evaluate marine condition systematically and comprehensively. In the current study, sampling was conducted in Laizhou Bay, China (S1, S2, and S3) in May, August, and October of 2015. And then, multi-integrated biomarker indexes approach was applied to assess marine PAHs pollution, select appropriate biomarkers, and evaluate marine environmental quality and health status of the clams of Ruditapes philippinarum. As the results showed, S2 was the most PAHs-polluted site while S1 was the least polluted site, and the levels of tPAHs in seawater and sediments ranged from 69.78 to 315.30 ng/L and 163.19 to 565.17 ng/g d.w., respectively. And all three sampling sites had different sources of PAHs. IBR represented DNA damage (F value), the expression of SOD, EROD activity, GST activity, and LPO could be served as biomarkers to monitor the PAHs pollution in Laizhou Bay. And MPI suggested the quality of all three sites: S1 was generally favorable, S2 was moderately polluted, and S3 was lightly polluted. BRI values showed that the order of health status of R. philippinarum was S1 > S3 > S2.

Combining monitoring and modelling approaches for BaP characterization over a petrochemical area

In this study, air concentrations of BaP in two different seasons (winter 2015 and summer 2016) and BaP levels in ground vegetation from Tarragona County were used as control simulations performed with the WRF-CHIMERE air quality modelling system, in order to reproduce the incidence of that hazardous chemical in air and soils. The CTM was validated for the present climatology, showing a good ability to represent air and soil concentrations of BaP over the target domain (petrochemical, chemical, urban and background sites), particularly in the winter. Then, the variation of the BaP concentrations in air and soils were simulated for the time series 1996-2015 and for the climate change scenario RCP8.5 (2031-2050). While an increase is projected for the levels in air, particularly in chemical and remote sites where the variation can go up to 10%, in terms of soil deposition the findings are the opposite, with an evident decrease in soil BaP concentrations, particularly for background sites. Finally, a potential health effect of BaP for the local population (lung cancer) was assessed. Although according to the projections the EU threshold for BaP atmospheric incidence (1 ng m^-3) will not be reached by 2050, there will be an increase in the life-time risk of lung cancer, particularly in the most populated areas within the simulation domain.

Source apportionment and carcinogenic risk assessment of passive air sampler-derived PAHs and PCBs in a heavily industrialized region

Cancer has become the primary reason of deaths in Dilovasi probably due to its location with unique topography under the influence of heavy industrialization and traffic. In this study, possible sources and carcinogenic health risks of PAHs and PCBs were investigated in Dilovasi region by Positive Matrix Factorization (PMF) and the USEPA approach, respectively. PAHs and PCBs were measured monthly for a whole year at 23 sampling sites using PUF disk passive samplers. Average ambient air concentrations were found as 285±431ng/m³ and 4152±6072pg/m³, for Σ₁₅PAH and Σ₄₁PCB, respectively. PAH concentrations increased with decreasing temperature especially at urban sites, indicating the impact of residential heating in addition to industrial activities and traffic. On the other hand, PCB concentrations mostly increased with temperature probably due to enhanced volatilization from their sources. Possible sources of PAHs were found as emissions of diesel and gasoline vehicles, biomass and coal combustion, iron and steel industry, and unburned petroleum/petroleum products, whereas iron-steel production, coal and biomass burning, technical PCB mixtures, and industrial emissions were identified for PCBs. The mean carcinogenic risk associated with inhalation exposure to PAHs and PCBs were estimated to be >10^-6 and >10^-5, respectively, at all sampling points, while the 95th percentile was >10^-5 at 15 of 23 and >10^-4 at 8 of 23 sampling locations, respectively. Probabilistic assessment showed, especially for PCBs, that a majority of Dilovasi population face significant health risks. The higher risks due to PCBs further indicated that PCBs and possibly other pollutants originating from the same sources such as PBDEs and PCNs may be an important issue for the region.

Polycyclic aromatic hydrocarbons (PAHs) in an urban river at mid and high latitudes: A case study in Siping, a traditional industrial city in Northeast China

The occurrence, spatial distribution, seasonal variation, sources, and ecological risks of polycyclic aromatic hydrocarbons (PAHs) in overlying water and surface sediments from Tiaozi River, which is an urban river running through the downtown of Siping City, a traditional industrial city of northeastern China, were investigated. The total PAH concentrations (ΣPAHs) in water varied from 473.5 to 2674.3 ng/L with a mean value of 1272.6 ng/L and ranged from 601.5 to 2906.3 ng/g with a mean value of 1534.4 ng/g in sediments. Both the individual and total PAH concentrations in water and sediments decreased from upstream to downstream, and the average ΣPAHs between the four seasons in water and sediments decreased in the following order of winter> autumn> spring> summer. The composition of the PAHs was characterized by an abundance of PAHs from 2 rings to 4 rings, and the predominant components were naphthalene, chrysene, and benzo(a)anthracene. The identification of the source indicated that coal combustion could be the main contributor to the PAHs. The equivalent toxic concentrations of benzo[a]pyrene in the water ranged from 11.5 to 33.1 ng/L, which were much higher than the concentration limit, suggesting that PAHs in the water could cause potential risks. The risk assessment of PAHs in sediments also showed that PAHs could cause negative effects on aquatic organisms in this river.

Spatial distribution and exposure risks of ambient chlorinated polycyclic aromatic hydrocarbons in Tokyo Bay area and network approach to source impacts

Chlorinated polycyclic aromatic hydrocarbons (ClPAHs) receive increasing attention as hazardous pollutants in terms of the high environmental persistence and toxicities. Ambient concentrations of 24 ClPAHs and 24 PAHs were investigated at 14 sites in the Tokyo Bay area of Japan. Twelve of 18 ClPAH species were detected in air samples, in spite of small sampling volumes. Mean concentrations of total PAHs in gas and particle phases were 5400 and 1400 pg/m³, and mean concentrations of total ClPAHs in gas and particle phases were 40 and 14 pg/m³, respectively. The spatial distributions of both total ClPAH and PAH concentrations indicated heavy pollution at sites in industrial activity areas. Principal component analysis suggested that the dominant sources of gaseous and particulate ClPAHs differed substantially from each other. In particular, gaseous ClPAHs could be produced by specific sources different from those of particulate ClPAHs. However, the dominant sources of particulate ClPAHs could be the same as those of particulate PAHs, including industrial activities such as steel and gas-production plants and natural gas-fired power plants. The influences of spatial relationships among sampling sites were represented using a network analysis. The constructed network showed that ambient ClPAHs and PAHs were dominated by local rather than regional pollution, because there were weaker relationships among nearby sites. Finally, exposure risks for ClPAHs were dominated by 7-chlorobenz[a]anthracene, followed by 9-chlorophenanthrene and 6-chlorobenzo[a]pyrene, and total risk was ∼1/200 that of PAHs.