Kinetic and isothermal adsorption-desorption of PAEs on biochars: effect of biomass feedstock, pyrolysis temperature, and mechanism implication of desorption hysteresis

Enhancing solid-phase extraction of tetracyclines with a hybrid biochar sorbent: A comparative study of chlorella and bamboo biochars

Biochar, a sustainable sorbent derived from pyrolyzed biomass, has garnered attention for its efficacy in solid-phase extraction (SPE) of antibiotics, with a particular focus on tetracyclines (TCs). Despite its recognized potential, the intricate separation mechanisms operative in biochar-based SPE systems have not been fully deciphered. This investigation contrasts chlorella biochar against commercial bamboo biochar, harnessing an array of analytical methodologies-microstructure characterization, adsorption thermodynamics, competitive adsorption kinetics, H+ back titration, and selectivity adsorption studies-complemented by a Box-Behnken design for the optimization of chlorella/bamboo-SPE and subsequent application in the analysis of animal-derived foodstuffs. The study unveils that a hybrid sorbent, integrating nitrogen-doped microporous chlorella biochar with mesoporous bamboo biochar in a 95/5 mass ratio, markedly diminishes irreversible adsorption while enhancing selectivity, surpassing the performance of single biochar SPE systems. The elucidated separation mechanisms implicate a partition model, propelled by oxygen-rich functional groups on chlorella biochar and the rapid adsorption kinetics of bamboo biochar, all orchestrated by electrostatic interactions within the mixed biochar framework. Moreover, the synergy of mixed biochar-SPE with high-performance liquid chromatography (HPLC) demonstrates exceptional proficiency in detecting TCs in animal viscera, evidenced by recovery rates spanning 80.80 % to 106.98 % and RSDs ranging from 0.24 % to 14.69 %. In essence, this research not only sheds light on the multifaceted factors influencing SPE efficiency but also propels the use of biochar towards new horizons in environmental monitoring and food safety assurance.

Comparison of Oil-Seed Shell Biomass-Based Biochar for the Removal of Anionic Dyes-Characterization and Adsorption Efficiency Studies

This research investigated the synthesis of biochar through the direct pyrolysis of pre-roasted sunflower seed shells (SFS) and peanut shells (PNS) and compared their application for the effective removal of textile dyes from wastewater. Biochar prepared at 900 °C (SFS900 and PNS900) showed the highest adsorption capacity, which can be attributed to the presence of higher nitrogen content and graphite-like structures. CHNS analysis revealed that PNS900 exhibited an 11.4% higher carbon content than SFS900, which enhanced the environmental stability of PNS biochar. Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analyses of the produced biochar indicated the degradation of cellulosic and lignin moieties. X-ray photoelectron spectroscopy (XPS) revealed a 13.8% and 22.6% increase in C-C/C=C mass concentrations in the SFS900 and PNS900, respectively, and could be attributed to the condensation of polyaromatic structures. Batch experiments for dye removal demonstrated that irrespective of dye species, PNS900 exhibited superior dye removal efficiency compared to SFS900 at similar dosages. In addition to H-bonding and electrostatic interactions, the presence of pyridinic-N and graphitic-N can play a vital role in enhancing Lewis acid-base and π-π EDA interactions. The results can provide valuable insights into the biochar-dye interaction mechanisms.

Stable polyethylene glycol/biochar composite as a cost-effective photothermal absorber for 24 hours of steam and electricity cogeneration

Seawater desalination powered by solar energy is the most environmentally and economical solution in responding to the global water and energy crisis. However, solar desalination has been negatively impacted by intermittent sun radiation that alternates between day and night. In this study, sugarcane bagasse (SCB) was recycled via the pyrolysis process to biochar as a cost-effective solar absorber. Besides, polyethylene glycol (PEG) as a phase change material was encapsulated in the abundant pore structure of biochar to store the thermal energy for 24 hours of continuous steam generation. The BDB/1.5 PEG evaporator exhibited an evaporation rate of 2.11 kg m-2 h-1 (98.1% efficiency) under 1 sun irradiation. Additionally, the BDB/1.5 PEG evaporator incorporated by the TEC1-12706 module for continuous steam and electricity generation with a power density of 320.41 mW m-2. Moreover, 10 continuous hours of evaporation were applied to the composite demonstrating outstanding stability. The composite exhibited high water purification efficiency through solar desalination due to the abundant functional groups on the biochar surface. Finally, the resulting low-cost and highly efficient PCM-based absorber can be used on a wide scale to produce fresh water and energy.

Adsorptive removal of dimethyl phthalate using peanut shell-derived biochar from aqueous solutions: equilibrium, kinetics, and mechanistic studies

Rise in polymer industry and extensive use of their products leads to leaching of phthalate esters and distributed into the different matrices of the environment. This chemical group has the potential to hamper the life of living organisms and ecosystem. Thus, it is essential to develop cost-effective adsorbents capable of removing these harmful compounds from the environment. In this work, peanut hull-derived biochar was taken as the adsorbent, and DMP was selected as the model pollutant or adsorbates. The biochars of different properties were produced at three pyrolysis temperatures (i.e., 450, 550, and 650 °C) to check how temperature affected the adsorbent properties and adsorption performance. Consequently, the performance of biochars for DMP adsorption was thoroughly studied by the combination of experiments and compared with commercial activated carbon (CAC). All the adsorbents are meticulously characterized using various analytical techniques and used for adsorption DMP from aqueous solutions. The results suggested that adsorption was favoring chemisorption with multi-layered adsorption as adsorption kinetics and isotherm are in good alignment with pseudo-second-order kinetics and Freundlich isotherm, respectively. Further, thermodynamic study revealed DMP adsorption on adsorbent is physically spontaneous and endothermic. The removal efficiency order of four adsorbent was as follows: BC650 > CAC > BC550 > BC450 with maximum efficiency of 98.8% for BC650 followed by 98.6% for CAC at optimum conditions. And as it is a short carbon chain PAE, dominant mechanisms of adsorption for DMP onto porous biochar were H-bonding, π-π EDA interactions, and diffusion within the pore spaces. Therefore, this study can provide strategies for the synthesis of biochar for effectively removing DMP from aqueous solution.

Adsorption and desorption of polychlorinated biphenyls on biochar colloids with different pyrolysis temperatures: the effect of solution chemistry

Biochar releases colloidal particles into the environment during applications and aging which can become carriers of pollutants and influence on the environmental risk of pollutants due to the excellent adsorption and migration properties of biochar colloids (BCCs). The adsorption and desorption behaviors of BCCs can be different from their bulk ones due to the colloidal size, which merits specific studies. Herein, the adsorption and desorption of 2,4,4'-trichlorobiphenyl (PCB28) as a representative on BCCs released from bulk biochars prepared from bamboo chips at 300, 500, and 700 C and the effects of solution properties were specifically investigated. Results show that the adsorption was dominated by pore filling and π-π interaction, and thus, BCCs prepared at higher temperature with greater pore volume and aromaticity had higher adsorption of PCB28. Results show that the adsorption was dominated by pore filling and π-π interaction, and thus, BCCs prepared at higher temperature with greater pore volume and aromaticity had higher adsorption of PCB28. The saturation adsorption amounts of PCB28 on BCC300, BCC500, and BCC700 were 21.9, 40.3, and 62.4 mg/g, respectively. It is noteworthy that PCB28 possessed a significant desorption hysteresis from BCCs, with the hysteresis index (Ce = 80 μg/L) increased from 0.380 to 0.661 as the preparation temperature of BCCs rising from 300 to 700 ℃. High concentration of NaCl (100 mmol/L) was unfavorable for the adsorption and desorption. The presence of humic acid or fulvic acid (FA), especially the smaller FA, could inhibit the adsorption and desorption of PCB28 on BCCs due to micropore blocking. In seawater, groundwater, surface water, and soil solution samples, the PCB28 adsorption of BCCs was inhibited to varying degrees in comparison with that in deionized water, and the desorption was noticeably inhibited in the groundwater sample. These findings provide valuable information for the understanding of interactions between BCCs and organic contaminants in natural waters and for the environmental application of biochars as well.

Remediation of phthalate acid esters from contaminated environment—Insights on the bioremedial approaches and future perspectives

Phthalates are well-known emerging pollutants that are toxic to the environment and human health. Phthalates are lipophilic chemicals used as plasticizers in many of the items for improving their material properties. These compounds are not chemically bound and are released to the surroundings directly. Phthalate acid esters (PAEs) are endocrine disruptors and can interfere with hormones, which can cause issues with development and reproduction, thus there is a huge concern over their existence in various ecological surroundings. The purpose of this review is to explore the occurrence, fate, and concentration of phthalates in various environmental matrices. This article also covers the phthalate degradation process, mechanism, and outcomes. Besides the conventional treatment technology, the paper also aims at the recent advancements in various physical, chemical, and biological approaches developed for phthalate degradation. In this paper, a special focus has been given on the diverse microbial entities and their bioremedial mechanisms executes the PAEs removal. Critically, the analyses method for determining intermediate products generated during phthalate biotransformation have been discussed. Concluisvely, the challenges, limitations, knowledge gaps and future opportunities of bioremediation and their significant role in ecology have also been highlighted.

Biochar for the Removal of Emerging Pollutants from Aquatic Systems: A Review

Water contaminated with emerging pollutants has become a serious environmental issue globally. Biochar is a porous and carbon-rich material produced from biomass pyrolysis and has the potential to be used as an integrated adsorptive material. Many studies have shown that biochar is capable to adsorb emerging pollutants from aquatic systems and could be used to solve the water pollution problem. Here, we provided a dual perspective on removing emerging pollutants from aquatic systems using biochar and analyzed the emerging pollutant removal efficiency from the aspects of biochar types, pollutant types and coexistence with heavy metals, as well as the associated mechanisms. The potential risks and future research directions of biochar utilization are also presented. This review aims to assist researchers interested in using biochar for emerging pollutants remediation in aquatic systems and facilitate research on emerging pollutants removal, thereby reducing their environmental risk.

Assessment of agricultural waste biochars for remediation of degraded water-soil environment: Dissolved organic carbon release and immobilization of impurities in one- or two-adsorbate systems

This paper presents a method of agricultural waste management - the production of two biochars (BC) from potato and raspberry stems. It defines the potential of these materials for remediation of degraded water and soil environments. The performed study included analyses of BC physicochemistry, dissolved organic carbon (DOC) release and ability to immobilize copper (Cu), tetracycline (TC) and carboxin (CB) in one- and two-adsorbate systems. The BCs were obtained with pyrolysis at 600 °C for 30 min in a nitrogen atmosphere. Their DOC was predominantly constituted of substances with large molecular weights and high aromaticity, meaning that both BCs can be safely applied as soil additives. Potato-biochar (P-BC) had a more developed surface than raspberry-biochar (R-BC). The specific surface area (S_BET) of P-BC was 122 m²/g, whilst of R-BC was 87 m²/g. As a result, the efficiency of impurity adsorption in the one-adsorbate systems was higher for P-BC (61.75% for Cu, 73.84% for TC, and 54.43% for CB). In the two-adsorbate systems, organic impurities improved the immobilization of heavy metal ions on BCs. The efficiency of Cu adsorption on P-BC when TC was present was 88.29%. Desorption of Cu from BC was highest using HCl, whilst that of TC and CB was highest using NaOH. Maximum desorption was observed in a two-adsorbate system with TC + CB (up to 63.6% for TC). These results confirmed that potato and raspberry stems can be used to produce highly effective BCs with large application potential, especially for remediation of degraded soils and polluted waters.

N-doped and activated porous biochar derived from cocoa shell for removing norfloxacin from aqueous solution: Performance assessment and mechanism insight

Environmental pollution has worsened as a result of antibiotic overuse. Nitrogen doping of biochar increases its ability to adsorb antibiotics and has been widely applied as an adsorbent. In this study, we synthesized nitrogen-doped biochar (N-A) from cocoa shell wastes calcined with urea and sodium bicarbonate (NaHCO₃) as nitrogen sources and green activators, respectively. An analysis of the biochar morphology, structure, specific surface area, and functional groups provided an understanding of its properties. As indicated by increased surface area, micropores, and surface functional groups, biochar was enhanced in its performance for norfloxacin adsorption when activated using NaHCO₃ and nitrogen doped. Adsorption experiments revealed that N-A biochar at 700 and 400 °C had a high adsorption capacity for NOR of 134 mg/g (N-A-CSB700) and 112.31 mg/g (N-A-CSB400) when compared to pristine biochar at 59.27 mg/g (CSB700) and 56.34 mg/g (CSB400), indicating that N-A doped modification on biochar greatly improved adsorption capacity. The Langmuir model demonstrated better NOR adsorption isotherms. The pseudo-second order and Elovich models closely followed the adsorption kinetics. Further investigations were conducted to determine how environmental factors influence biochar interaction with NOR. The results indicated a stable NOR removal efficiency was kept at a wide pH range, whereas the ionic strength inhibited the NOR adsorption process. The investigation into the sorption mechanism revealed that pore filling, H-bonding, π-π EDA interactions, ion exchange, and electrostatic attraction may all be implicated in the NOR adsorption process. Specifically, pore filling played the dominant role for N-A-CSB700, while N-A-CSB400 sorption occurred mainly via H-bonding. Since N-A-CSB700 doped biochar combines high adsorption capacity with a low inhibition effect of environmental factors (Na⁺/Ca²⁺), it has a high potential for future practical applications as an environmentally sustainable alternative. It uses low-cost solid waste to produce an adsorbent to cope with emerging contaminants such as antibiotics.

Synthesis and application of starch-stablized Fe-Mn/biochar composites for the removal of lead from water and soil

Starch-stablized and Fe/Mn bimetals modified biochar derived from corn straw (SFM@CBC and SFM@CBC-350) were firstly prepared, characterized (FTIR, XRD, SEM, EDS, BET and XPS), and applied in Pb removal from water and soil. SFM@CBC and SFM@CBC-350 displayed highly effective adsorption performance of Pb²⁺ from wastewater with the maximum adsorption capacity of 170.91 mg g^-1 and 190.17 mg g^-1, respectively, which were much greater than that of FM@CBC (149.25 mg g^-1) and CBC (101.10 mg g^-1). Studies of adsorption kinetics, isotherms and thermodynamics indicated that the absorption of Pb²⁺ by SFM@CBC and SFM@CBC-350 was spontaneous and endothermic reaction, and it was controlled by monolayer chemisorption. The mechanism studies indicated that Pb²⁺ removal involved with multiple mechanism, including complexation (dominant process confirmed by XPS analysis), physical adsorption, electrostatic attraction, and cation exchange. The reusability test demonstrated that SFM@CBC and SFM@CBC-350 had very good stability and reusability. In addition, in order to further explore Pb removal performance of the modified biochar, SFM@CBC-350 was used in soil-ryegrass pot systems. Compared with the controls, the addition of SFM@CBC-350 reduced Pb content in soil and ryegrass, increased the biomass and total chlorophyll content, reduced the activity of antioxidant enzymes (CAT, SOD, MDA and POD) and ROS fluorescence intensity of ryegrass, thus alleviating Pb stress of ryegrass. Besides, the addition of SFM@CBC-350 could increase the richness and diversity of soil microorganisms, which was beneficial to the growth of ryegrass. Hence, SFM@CBC-350 has the potential of being used as a green, efficient and promising adsorbent in Pb removal from wastewater and soil.

Effects of di-n-butyl phthalate on aerobic composting process of agricultural waste: Mainly based on bacterial biomass and community dynamics analysis

Phthalic acid esters (PAEs) pollution has become a major environmental problem in agricultural waste composting. However, little information was available about the how the PAEs alter microbial processes during composting. This study investigated the effects of di-n-butyl phthalate (DBP) on bacterial biomass and community dynamics during composting. The results showed that a decreasing of DBP was observed from thermophilic phase and 43.26% of DBP was degraded after composting. The bacterial biomass and diversity during composting were reduced under DBP stress, so delaying the decomposition of organic matter. Moreover, the changes in bacterial community were observed since the thermophilic phase of DBP-contaminated composting. KEGG pathway analysis indicated that DBP stress decreased the relative abundance of the main metabolic pathways and inhibited compost maturation. Moreover, DBP stress had more significant correlation with the dominant bacteria. This work will expand the understanding of PAEs-contaminated organic waste composting and further control of PAEs pollutants.

Adsorption of Phthalate Acid Esters by Activated Carbon: The Overlooked Role of the Ethanol Content

Ethanol has great effects on the adsorption of phthalate acid esters (PAEs) on activated carbon (AC), which are usually overlooked and hardly studied. This study investigated the overlooked effects of ethanol on the adsorption of PAEs in alcoholic solutions. The adsorption capacities of dibutyl phthalate (DBP) on AC in solutions with ethanol contents of 30, 50, 70, and 100 v% were only 59%, 43%, 19%, and 10% of that (16.39 mg/g) in water, respectively. The ethanol content increase from 50 v% to 100 v% worsened the adsorption performances significantly with the formation of water–ethanol–DBP clusters (decreasing from 13.99 mg/g to 2.34 mg/g). The molecular dynamics simulation showed that the DBP tended to be distributed farther away from the AC when the ethanol content increased from 0 v% to 100 v% (the average distribution distance increased from 5.25 Å to 15.3 Å). The PAEs with shorter chains were more affected by the presence of ethanol than those with longer chains. Taking DBP as an example, the adsorption capacity of AC in ethanol (0.41 mg/g) is only 2.2% of that in water (18.21 mg/g). The application results in actual Baijiu samples showed that the adsorption of PAEs on AC had important effects on the Baijiu flavors.

Insights into effects of ageing processes on Cd-adsorbed biochar stability and subsequent sorption performance

The conversion of agricultural biomass wastes into biochar has enormous potential to improve soil quality. Particularly, biochar particles introduced into the natural environment readily bind environmental pollutants. The interaction of biochar and adsorbed pollutants will, however, be impacted by long term ageing. The mechanism of biochar adsorption performance that could be affected by such early-adsorbed pollutant is not understood. Herein, we study the effects of different ageing processes on Cd-adsorbed biochar stability by K₂CrO₇-H₂SO₄ oxidation method for carbon loss evaluation, and sorption capacity towards diethyl phthalate (DEP). We adopted artificially accelerated ageing methods to simulate various processes: HNO₃/H₂SO₄, H₂O₂ oxidative, leaching, high temperature, freeze-thaw cycles, and dry-wet cycles. The results showed that all the Cd-adsorbed aged biochars had more C-C/C-H functional groups and exhibited higher carbon stability than pristine aged biochars. Specially, the carbon loss (20.2-25.2%) of Cd-adsorbed biochar showed almost two times lower than pristine biochar (34.5-35.4%) after high temperature and leaching ageing due to enhancing Cd-π bonding, which could resist strong K₂Cr₂O₇/H₂SO₄ oxidation. Such interaction synergistically promoted the sequestration of adsorbed Cd on biochars. The subsequent sorption performance for DEP on Cd-adsorbed biochars was slightly higher than pristine biochar after H₂O₂ oxidative and leaching ageing. Whereas, the dominate mechanism of DEP removal on Cd-adsorbed biochars changed to hydrophobic partitioning after high temperature, freeze-thaw cycles and dry-wet cycles ageing, leading to a decreased DEP sorption capacity. Hence, the biochar application must be comprehensively considered the susceptibilities due to reciprocal effects of early adsorbed pollutant and natural ageing environment, which helps us both assess and take measures to minimize potential risks in the environment. The present study suggests the continuous irrigation and tropical or temperature climate regions would be suitable for long-term biochar application in soil remediation and carbon sequestration.

One-pot pyrolysis of a typical invasive plant into nitrogen-doped biochars for efficient sorption of phthalate esters from aqueous solution

Invasive plants pose a significant threat to natural ecosystems because of their high adaptability, rapid propagation and spreading ability in the environment. In this study, a typical aquatic invasive plant, Pistia stratiotes, was chosen as a novel feedstock for the preparation of nitrogen-doped biochars (NBs) for the first time, and the NBs were used as efficient sorbents to remove phthalate esters (PAEs) from aqueous solution. Characterization results showed that NBs possess great pore structure (up to 126.72 m² g^-1), high nitrogen (2.02%-2.66%) and ash (24.7%-34.1%) content, abundant surface functional groups, hydrophobicity and a graphene structure. Batch sorption experiments were performed to investigate the sorption performance, processes and mechanisms. The capacities for PAEs sorption onto NBs were high, especially with NBs pyrolyzed at 700 °C, ranging up to 161.7 mg g^-1 for diethyl phthalate and 85.4 mg g^-1 for dibutyl phthalate; these levels were better than many reported for other sorbents. With kinetic and isotherm results, Pseudo-second order and Freundlich models fit the sorption data well, and chemical interactions involving hydrogen bonding, Lewis acid-base interaction, functional group interaction, cation-π interaction and π-π stacking interaction were identified as possible rate-limited steps. Moreover, Intra-particle diffusion and Dubinin-Radushkevich models indicated that multiple pore filling and partitioning dominated the process of PAEs sorption onto NBs. This study opens the door for new methods of pollution control with waste treatment, since invasive plant biomass resources were converted into advanced biochars for efficient environmental remediation.

Towards a Soil Remediation Strategy Using Biochar: Effects on Soil Chemical Properties and Bioavailability of Potentially Toxic Elements

Soil contamination with potentially toxic elements (PTEs) is considered one of the most severe environmental threats, while among remediation strategies, research on the application of soil amendments has received important consideration. This review highlights the effects of biochar application on soil properties and the bioavailability of potentially toxic elements describing research areas of intense current and emerging activity. Using a visual scientometric analysis, our study shows that between 2019 and 2020, research sub-fields like earthworm activities and responses, greenhouse gass emissions, and low molecular weight organic acids have gained most of the attention when biochar was investigated for soil remediation purposes. Moreover, biomasses like rice straw, sewage sludge, and sawdust were found to be the most commonly used feedstocks for biochar production. The effect of biochar on soil chemistry and different mechanisms responsible for PTEs' immobilization with biochar, are also briefly reported. Special attention is also given to specific PTEs most commonly found at contaminated soils, including Cu, Zn, Ni, Cr, Pb, Cd, and As, and therefore are more extensively revised in this paper. This review also addresses some of the issues in developing innovative methodologies for engineered biochars, introduced alongside some suggestions which intend to form a more focused soil remediation strategy.

A review on efficient removal of phthalic acid esters via biochars and transition metals-activated persulfate systems

As emerging contaminants, PAEs (Phthalic Acid Esters or Phthalate Esters) have been extensively utilized in industrial production to soften the rigid plastics (plasticizers), and their related products are widely distributed in our daily life. The PAEs can readily transfer from the products to the surrounding environment due to not being chemically bound to the products. In this study, we analyzed the PAEs' properties, usage, and consumption in the world, as well as toxicity to human beings. As endocrine-disrupting chemicals (EDCs), PAEs can disturb the normal hormones reactions, resulting in developmental and reproductive problems. Thus, we have to concern the removal strategies of PAEs. We summarized two novel approaches, including biochars and persulfate (PS) oxidation for effectively removing PAEs in the literature. Their characteristics, removal mechanisms, and the main impact factors on the removal of PAEs were highlighted. Moreover, transition metal-activated PS showed good performance on PAEs degradation. Furthermore, the synergy of biochars and transition metals-PS can overcome the disadvantages of a single approach, and show better performance on the removal of PAEs. Finally, we put forward vital strategies to update two approaches (including the combined) for enhancing the removal of PAEs. It is expected that the researchers or scientists can get a hint on effectively remediating PAEs-contaminated sites via the biochars' sorption/transition metals-PS or the combined two from this review paper.

Fe-Mn oxide modified biochar decreases phthalate uptake and improves grain quality of wheat grown in phthalate-contaminated fluvo-aquic soil

We used a pot experiment to investigate the effectiveness of 0.5, 1.0, and 2.0% biochar (BC) or iron-manganese oxide modified biochar (FMBC) additions on the biomass, enzyme activity, and grain quality of wheat plants grown in dibutyl phthalate (DBP) and di-(2-ethylhcxyl) phthalate (DEHP) polluted fluvo-aquic soils, as well as the bioavailability of DBP and DEHP. BC and FMBC applications significantly reduced DBP and DEHP accumulation in grains, which enhanced the content of starch and protein-related enzyme, thereby improving yield, and starch and protein content in wheat grains and increasing the content of minerals including Fe, Mn, K and Ca. Molecular docking assays showed that DBP and DEHP could bind to starch synthase (GBSS) through hydrogen bonds and intermolecular forces, which may have hindered the entry of substrates or occupied the binding sites of the reactants, thus inhibiting the activity of GBSS. In addition, FMBC treatment had a better inhibitory effect on the phytotoxicity of DBP and DEHP on wheat grain than BC treatment. This result might be attributed to the fact that FMBC has more functional groups and porous structure, and larger specific surface area. In summary, these findings contribute to our understanding of the mechanism of phthalate phytotoxicity, which may help us prevent/reduce it in the future.

Sorption of diethyl phthalate and cadmium by pig carcass and green waste-derived biochars under single and binary systems

Potentially toxic elements (PTEs) and phthalic acid esters (PAEs) often coexist in contaminated soils. Their co-existence may affect the mutual sorption behavior, and thereby influence their bioavailability and fate in soils. To our best knowledge, the impacts of plant-and animal-derived biochar on the competitive sorption-desorption of PTEs and PAEs in soils with different organic carbon content have not been studied up to date. Therefore, in this study, batch sorption-desorption experiments were conducted to investigate the influence of biochars derived from pig carcass and Platanus orientalis branches on the mono- and competitive sorption of cadmium (Cd²⁺) and diethyl phthalate (DEP) in soils with high (HS) and low (LS) organic carbon content. The DEP sorption was well described by Freundlich isotherm model, while Cd²⁺ sorption fitted better with the Langmuir isotherm model. Application of both biochars enhanced soil sorption of DEP, which increased as the application doses increased. The HS showed a stronger affinity to both DEP and Cd²⁺ than the LS. In the LS, the pig carcass biochar (PB) addition was more effective to increase the sorption capacity of Cd²⁺ and DEP and to reduce their desorption than woody biochar (WB) treatments. Moreover, the co-existing of Cd²⁺ could reduce the sorption of DEP, especially in the LS. The presence of DEP enhanced Cd²⁺ sorption in LS treated by both biochars, but the sorption of Cd²⁺ was suppressed with DEP addition in the PB-amended HS. In conclusion, the soil sorption capacity of DEP and Cd²⁺ was affected by biochar type, application dose and soil organic carbon content. The reciprocal effect between DEP and Cd²⁺ was also a crucial factor influencing their sorption/desorption by biochar. Therefore, PB and WB, especially PB, can be used for metal/DEP immobilization due to enhanced sorption. This approach is applicable for future remediation of soils contaminated by PTEs and PAEs.

Biochar-amendment-reduced cotransport of graphene oxide nanoparticles and dimethyl phthalate in saturated porous media

Production and application of graphene oxide (GO) and biochar for water and soil treatment is steadily growing, driving the necessity to understand the cotransport behavior of contaminants and GO nanoparticles in porous media and the possible effect of biochar to reduce their cotransport. The cotransport of GO nanoparticles and dimethyl phthalate (DMP) as a model in a sand column and biochar-amended sand column (biochar column) was compared. The transport of DMP in the test columns was independent of the solution ionic strength (IS), while the transport of GO decreased with increased IS due to the enhanced aggregation of GO nanoparticles. The sand column had no retention capacity (less than 1%) for DMP, while the biochar column had significantly increased retention of DMP (100%). The retention of GO in the biochar column was significantly higher than that of the sand column because biochar can improve the roughness of the media and adsorb GO via π-π interactions. Under low-IS conditions, GO facilitated DMP transport by providing vehicles and adsorption sites (vehicle effect). Due to reversible adsorption-desorption, the adsorbed DMP on GO could be released, resulting in tailing during the flushing phase. The vehicle effect of GO on DMP transport was significantly weakened in the biochar columns, and DMP tailing during the flushing phase was not observed in the biochar columns, which was attributed to the strong retention/adsorption of the biochar columns for both GO and DMP, higher affinity of DMP on biochar than GO, and desorption hysteresis of DMP on biochar. These observations are important for evaluating the potential role of biochar in soil and water remediation, as well as mitigating the health risks of GO and organic contaminants in the environment.

Use of Bacillus-siamensis-inoculated biochar to decrease uptake of dibutyl phthalate in leafy vegetables

Dibutyl phthalate (DBP) is a frequently detected farmland contaminant that is harmful to the environment and human health. In this study, a DBP-degrading endophytic Bacillus siamensis strain T7 was immobilized in rice husk-derived biochar for bioremediation of DBP-polluted agricultural soils. The effects of this microbe-biochar composite on the soil prokaryotic community and the mechanism by which it regulates DBP degradation, were also investigated. A supplement of T7-biochar composite not only significantly boosted DBP biodegradation in soil by raising the DBP degradation rate constant and half-life from 0.1979 d^-1 and 2.3131 d to 0.2434 d^-1 and 2.1062 d, respectively, but also impeded DBP uptake by leafy vegetables. The general bioremediation effect of T7-biochar alliance excelled pure T7 suspensions and biochar, by trapping more DBP and boosting its complete degradation in soil. Besides, the combination of strain T7 and biochar can increase the proportion of some beneficial bacteria and boost the functional diversity of soil prokaryotic community, then to a certain extent may reverse the negative effect of DBP pollution on the agricultural soils. These results indicate that the rice-husk-derived biochar is a proper media when utilizing functional microbes into environmental treatment. Overall, T7-biochar composite is a promising soil modifier for soil bioremediation and the production of DBP-free crops.

A rapid experimental protocol to determine the desorption resistant fraction of sediment-sorbed hydrophobic organic contaminants

Desorption of hydrophobic organic contaminants (HOCs) from sedimentary materials plays a vital role in dictating the fate and transport of HOCs in the environment. Desorption irreversibility is a commonly observed phenomenon in laboratory sorption/desorption studies of HOCs. A desorption-resistant fraction (DRF) typically exists during the desorption process. To correctly evaluate the DRF of HOCs can considerably contribute to the understanding of availability and bioavailability of HOCs. This can substantially benefit contaminant remediation and cleanup operations. Conventional batch method to measure the DRF replies on repetitive washing of the sediments, which is time-consuming and can be impractical. This study presents an experimental protocol to quantify the DRF of the sediment-sorbed organic contaminants in a rapid manner. This protocol utilizes cosolvent to expedite desorption kinetics and adopts an ultrafiltration/centrifugation combined method to achieve a complete separation of sediment and solution phases. This proposed experimental protocol can facilitate the quantification of the DRF of sorbed contaminants to understand and minimize the uncertainties associated with risk-based pollution remediation approach. This protocol has the potential to be widely used in environmental studies to characterize sorption and desorption properties of HOCs with soil and sedimentary materials.

Resource utilization of a typical vegetable waste as biochars in removing phthalate acid esters from water: A sorption case study

It is very important to utilize associated vegetable products as resources, especially in large-scale vegetable cultivation areas. In this study, pepper straw, a vegetable waste, was pyrolyzed into pepper straw biochars (PBs) to investigate their sorption potential for phthalate acid esters (PAEs). The results showed that PBs have porous structures and abundant surface functional groups. Dibutyl phthalate (DBP) and dimethyl phthalate (DMP) removal by PBs was divided into two stages, fast and slow sorption. The PBs pyrolyzed at 500 °C showed greater DBP and DMP sorption capacity than those pyrolyzed at 400 and 600 °C. Both chemical and physical sorption occurred in the whole sorption process of PAEs to PBs. It is proposed that converting pepper straw into biochars to use as sorbents could be an environmentally friendly way of vegetable waste resource utilization.

New insights into contrasting mechanisms for PAE adsorption on millimeter, micron- and nano-scale biochar

Biochar is being examined as a potential sorbent for organic pollutants in the environment including phthalate esters (PAEs). It has been noted that nano-scale biochar particles displayed stronger migration potential than other particles, which poses the potential risk of pollutant transfer through the environment. In this present study, we examined the influence of sub-millimeter (200-600 μm), micron-scale (10-60 μm), and nano-scale (0.1-0.6 μm) biochar on diethyl phthalate (DEP, as a model) adsorption using particles derived from corn straw and rice husk biochar. Meanwhile, the interaction between adsorption capacity and initial pH was also considered. Our results showed that the adsorption capacity of biochar for DEP increased with decreasing particle size, and was considerably higher for nano-scale biochar than for other particles. This was attributable to its developed pore structure and higher specific surface area (SSA), especially the dominant micropore (292.73 m²/g), suggesting that the adsorption of DEP to nano-scale biochar was dominated by pore-filling rather than π-π EDA and H bonding that was applied to biochar of larger, more typical dimensions. The adsorption capacity of nano-scale biochar for DEP was markedly decreased when initial pH was decreased from 9.0 to 3.0. Because an acid environment could reduce the absolute surface charge on nano-scale biochar, it was easier for the particles to agglomerate. Nano-scale biochar therefore have higher activity in alkaline conditions, which could pose certain risks through their application into the environment.

A Review on the Synthesis and Characterization of Biomass-Derived Carbons for Adsorption of Emerging Contaminants from Water

This review analyzes the preparation and characterization of biomass-derived carbons and their application as adsorbents of emerging contaminants from water. The study begins by identifying the different types of emerging contaminants more often found in water streams, including a brief reference to the available technologies for their removal. It also describes the biomass sources that could be used for the synthesis of biochars and activated carbons (AC). The characterization of the adsorbents and the different approaches that can be followed to learn about the adsorption processes are also detailed. Finally, the work reviews literature studies focused on the adsorption of emerging contaminants on biochars and activated carbons synthesized from biomass precursors.