Characterizations and mechanisms for synthesis of chitosan-coated Na-X zeolite from fly ash and As(V) adsorption study

Fluorescent cellulose nanofibrils-based hydrogel incorporating MIL-125-NH2 for effective adsorption and detection of iodide ion

To remove iodine ion (I-) from wastewater, a novel hydrogel, the fluorescent cellulose nanofibrils-based hydrogel (FCNH), was synthesized to enable both detection and adsorption of I-. The FCNH comprised cellulose nanofibrils (CNs), silver nanoclusters (AgNCs), and MIL-125-NH2. It exhibited an excellent adsorption capacity for I-, with a maximum adsorption capacity of 373.7 mg/g, fitting both the Langmuir and pseudo-second-order models. Additionally, FCNH displayed excellent regeneration properties, retaining 88.0 % of its initial adsorption capacity after six adsorption-desorption cycles. Functioning as a fluorescent sensor, the synthesized FCNH enabled the detection of I- through dynamic quenching, with linear ranges of 5 to 200 mg/L and 0.2 to 1.0 μg/L, and a determination limit of 0.11 μg/L. Analysis of the adsorption and detection mechanisms revealed that FCNH's outstanding performance arose from its 3D porous structure comprising CNs, AgNCs, and MIL-125-NH2. Economic analysis indicated that FCNH was inexpensive compared to commercially available activated carbon. Thus, FCNH demonstrated significant potential as an economical and reusable adsorbent for iodine ion removal.

Adsorption of metal porphyrins using chitosan/zeolite-X composite as an efficient demetallization agent for crude oil: Isotherm, kinetic, and thermodynamic studies

Chitosan/zeolite-X (CHS/ZX) was synthesized to serve as an effective adsorbent for metal porphyrins through adsorption processes as an alternative to traditional separation methods from crude oil. The adsorption-desorption mechanisms of vanadyl and nickel tetraphenyl porphyrin (VO-TPP and Ni-TPP) were conducted on the model solution. Compared to individual components CHS and ZX, the CHS/ZX composite exhibited a doubled capacity for metal porphyrin removal. The synthesized composite was systematically characterized using FESEM, BET, XRD, FTIR, TGA, XPS, and CHN analyses. The study investigated the impact of many factors, including temperature, initial metal-porphyrin concentration, CHS/ZX dose, and contact time, on the adsorption efficiency of metal-porphyrin using CHS/ZX adsorbents. The adsorption processes of VO-TPP and Ni-TPP on CHS/ZX were effectively assessed through various equilibrium models, such as Langmuir, Freundlich, and Dubinin-Radushkevich (D-R). The pseudo-second-order model accurately depicted the adsorption processes of both VO-TPP and Ni-TPP. Determining the point of zero charge (pHPZC) highlighted the composite's surface charge distribution. Furthermore, considering the ΔG° and ΔH° values, the adsorption processes at different temperatures are exothermic, and VO-TPP exhibits a greater adsorption capacity than Ni-TPP under similar conditions. Notably, 73.7 % of VO-TPP and 83.8 % of Ni-TPP that were adsorbed were successfully recovered.

Synthesis of zeolites from volcanic ash (Tajogaite, Spain) for the remediation of waters contaminated by fluoride

In the eruptive event of Tajogaite (2021) in La Palma, Canary Islands, large quantities of volcanic ash were accumulated, affecting the local environment and urban areas. In this study, volcanic ash sampled from urban areas (catalogued as municipal waste (20 03 03) by the European Wastes Catalogue) were converted into zeolites by hydrothermal synthesis at 100 °C with previous alkaline fusion at 550 °C with distilled water. During this process, new phases of zeolite principally type X and sodalite have been identified by XRD at 2 h of incubation. These zeolites, with the course of incubation time, present competitive processes where the transformation into sodalite develops after 24 h as the predominant phase. The synthesized zeolitic material presents a high concentration as impurities in Fe2O3 (13.70 wt%), Na2O (12.70 wt%), CaO (11.65 wt%), and TiO2 (3.89 wt%) coming from the volcanic ash and NaOH introduced in the synthesis methodology. These impurities impart different physicochemical capabilities to the zeolitic material. The application of zeolites obtained in a preliminary fluoride adsorption experiment with volcanic leachate water rich in fluoride has been tested in a novel way. Removal efficiencies of 41.4% at acidic pH (5.77) have been obtained with 2 g L-1 adsorbent zeolitic material doses. A value-added material is obtained and applied in a preliminary way to solve a problem generated by the volcanic ash itself, allowing the End of Waste status and meeting different objectives of the sustainable development goals of the UN Agenda 2030.

Recent advances in removal of inorganic anions from water by chitosan-based composites: A comprehensive review

Chitosan is a modified natural carbohydrate polymer that has been found in the exoskeletons of crustaceans (e.g., lobsters, shrimps, krill, barnacles, crayfish, etc.), mollusks (octopus, oysters, squids, snails), algae (diatoms, brown algae, green algae), insects (silkworms, beetles, scorpions), and the cell walls of fungi (such as Ascomycetes, Basidiomycetes, and Phycomycetes; for example, Aspergillus niger and Penicillium notatum). However, it is mostly acquired from marine crustaceans such as shrimp shells. Chitosan-based composites often present superior chemical, physical, and mechanical properties compared to single chitosan by incorporating the benefits of both counterparts in the nanocomposites. The tunable surface chemistry, abundant surface-active sites, facilitation synthesize and functionalization, good recyclability, and economic viability make the chitosan-based materials potential adsorbents for effective and fast removal of a broad range of inorganic anions. This article reviews the different types of inorganic anions and their effects on the environment and human health. The development of the chitosan-based composites synthesis, the various parameters like initial concentration, pH, adsorbent dosage, temperature, the mechanism of adsorption, and regeneration of adsorbents are discussed in detail. Finally, the prospects and technical challenges are emphasized to improve the performance of chitosan-based composites in actual applications on a pilot or industrial scale.

Capturing Cu2+ and recycling spent Cu-adsorbents as catalyst for eliminating Rhodamine B: reactivity and mechanism

The thorny problem of adsorption is the disposing of spent adsorbent. In this manuscript, the exhaust adsorbent of efficient capture Cu(II) over ZSM-5 that supported zero-valent iron (nZVI) was reused as a catalyst for eliminating Rhodamine B (RhB). Batch experiments were used to evaluate the removal performance of Cu2+ and RhB. The results demonstrated that the Cu2+ adsorption process obeyed pseudo-second-order kinetics, and the adsorption performance was dependent on solution pH. The maximum adsorption capacity at the optimal pH 4.0 was 375.9 mg/g; equilibrium was reached rapidly within 35 min. From XPS, the reduction-oxidation between Fe0 and Cu2+ was occurred in the adsorption process, and Fe2+, Fe3+, and Cu0 was formed. In the recycling experiments, RhB was removed by the spent Cu adsorbent, with the removal performance being dependent on the initial Cu concentration, in the order of 5 mg/L > 20 mg/L > 0 mg/L > 100 mg/L > 500 mg/L. RhB removal also improved with increasing H2O2 concentration. More than 99.9% of the RhB was degraded within 8 min using 1.75 mM H2O2, which was a large improvement over the previously used catalyst. The hydroxyl radical was found to be the main free radical responsible for RhB degradation.

Zeolite greenly synthesized from fly ash and its resource utilization: A review

Fly ash is an incineration byproduct of thermal power plants. Due to the complex composition of fly ash, improper disposal will seriously harm the ecological environment. Therefore, how to effectively use fly ash to safely and environmentally replace landfills is a worldwide concern. Considering the high silicon and aluminum contents in fly ash, it has the potential to synthesize zeolite, which has a wide range of applications in sewage treatment, gas adsorption, etc. Therefore, the synthesis of zeolites from fly ash is consistent with the theme of sustainable development. The synthesis mechanism of zeolite, various synthetic methods of zeolite from fly ash and their advantages and disadvantages was introduced in detail. In addition, combined with the current research hotspots, the application of synthetic zeolite from fly ash in the fields of sewage treatment and gas adsorption was introduced. Finally, the future development prospects and research directions of synthetic zeolite from fly ash to improve the utilization rate of fly ash were considered.

Arsenic in drinking water: overview of removal strategies and role of chitosan biosorbent for its remediation

Accessibility to clean drinking water often remains a crucial task at times. Among other water pollutants, arsenic is considered a more lethal contaminant and has become a serious threat to human life globally. This review discussed the sources, chemistry, distribution, and toxicity of arsenic and various conventional technologies that are in option for its removal from the water system. Nowadays, biosorbents are considered the best option for arsenic-contaminated water treatment. We have mainly focused on the need and potential of biosorbents especially the role of chitosan-based composites for arsenic removal. The chitosan-based sorbents are economically more efficient in terms of their, low toxicity, cost-effectiveness, biodegradability, eco-friendly nature, and reusability. The role of various modification techniques, such as physical and chemical, has also been evaluated to improve the physicochemical properties of biosorbent. The importance of adsorption kinetic and isotherm models and the role of solution pH and pH_PZC for arsenic uptake from the polluted water have also been investigated. Some other potential applications of chitosan-based biosorbents have also been discussed along with its sustainability aspect. Finally, some suggestions have been highlighted for further improvements in this field.

A positive perspective during COVID-19 related to groundwater crisis

The months from March to June refer as water crisis months in many places of India, because in these months of summer generally, Indian people face shortage of water. In the summer season, groundwater level decreases due to high temperature and increased evaporation of water in most of the places. This present discussion is focused on one positive aspect during the COVID-19 pandemic, which is related to rainfall during this summer in India. It has been observed that the rainfall in India in the months of March to May (as of now, on May 18, 2020) is high as compared to previous years and it might increase the groundwater level and people of India would not face a water crisis during this summer.

From microporous to mesoporous mineral frameworks: An alliance between zeolite and chitosan

Microporous and mesoporous minerals are key elements of advanced technological cycles nowadays. Nature-driven microporous materials are known for biocompatibility and renewability. Zeolite is known as an eminent microporous hydrated aluminosilicate mineral containing alkali metals. It is commercially available as adsorbent and catalyst. However, the large quantity of water uptake occupies active sites of zeolite making it less efficient. The widely-used chitosan polysaccharide has also been used in miscellaneous applications, particularly in medicine. However, inferior mechanical properties hampered its usage. Chitosan-modified zeolite composites exhibit superior properties compared to parent materials for innumerable requests. The alliance between a microporous and a biocompatible material with the accompaniment of negative and positive charges, micro/nanopores and proper mechanical properties proposes promising platforms for different uses. In this review, chitosan-modified zeolite composites and their applications have been overviewed.