Potentiometric polyphenol oxidase biosensor for sensitive determination of phenolic micropollutant in environmental samples

3D hierarchical LDHs-based Janus micro-actuator for detection and degradation of catechol

Micro/nanomotors that combine the miniaturization and autonomous motion have attracted much research interest for environmental monitoring and water remediation. However, it is still challenging to develop a facile route to produce bifunctional micromotors that can simultaneously detect and remove organic pollutants from water. Herein, we developed a novel Janus micromotor with robust peroxide-like activity for simultaneously colorimetric detection and removal of catechol from water. Such laccase (Lac) functionalized Janus micromotor consisted of calcined MgAl-layered double hydroxides (MgAl-CLDHs) nanosheets and Co₃O₄-C nanoparticles (Lac-MgAl-CLDHs/Co₃O₄-C), revealing unique 3D hierarchical microstructure with highly exposed active sites. The obtained Janus micromotors exhibited autonomous motion with a maximum velocity of 171.83 ± 4.07 µm/s in the presence of 7 wt% H₂O₂ via a chemical propulsion mechanism based on the decomposition of H₂O₂ by Co₃O₄-C layer on the hemisphere surface of Janus micromotors. Owing to the combination of autonomous motion and high peroxide-like activity, Lac-MgAl-CLDHs/Co₃O₄-C Janus micromotors could sensitively detect catechol with the limit of detection of 0.24 μM. In addition, such Janus micromotors also could quickly degrade catechol by •OH generated from a Fenton-like reaction. It is a first step towards using autonomous micromotors for highly selective, sensitive, and facile detection and quick removal of catechol from water.

Bioanalytical System for Determining the Phenol Index Based on Pseudomonas putida BS394(pBS216) Bacteria Immobilized in a Redox-Active Biocompatible Composite Polymer "Bovine Serum Albumin-Ferrocene-Carbon Nanotubes"

The possibility of using the microorganisms Pseudomonas sp. 7p-81, Pseudomonas putida BS394(pBS216), Rhodococcus erythropolis s67, Rhodococcus pyridinivorans 5Ap, Rhodococcus erythropolis X5, Rhodococcus pyridinivorans F5 and Pseudomonas veronii DSM 11331^T as the basis of a biosensor for the phenol index to assess water environments was studied. The adaptation of microorganisms to phenol during growth was carried out to increase the selectivity of the analytical system. The most promising microorganisms for biosensor formation were the bacteria P. putida BS394(pBS216). Cells were immobilized in redox-active polymers based on bovine serum albumin modified by ferrocenecarboxaldehyde and based on a composite with a carbon nanotube to increase sensitivity. The rate constants of the interaction of the redox-active polymer and the composite based on it with the biomaterial were 193.8 and 502.8 dm³/(g·s) respectively. For the biosensor created using hydrogel bovine serum albumin-ferrocene-carbon nanotubes, the lower limit of the determined phenol concentrations was 1 × 10^-3 mg/dm³, the sensitivity coefficient was (5.8 ± 0.2)∙10^-3 μA·dm³/mg, Michaelis constant K_M = 230 mg/dm³, the maximum rate of the enzymatic reaction R_max = 217 µA and the long-term stability of the bioanalyzer was 11 days. As a result of approbation, it was found that the urban water phenol content differed insignificantly, measured by creating a biosensor and using the standard photometric method.

Electrochemical biosensor based on three components random conjugated polymer with fullerene (C60)

Herein, a conjugated polymer and fullerene bearing architecture-based electrochemical Tyrosinase (Tyr) enzyme inhibition biosensor for indomethacin (INDO) drug active compound has been developed. For this purpose, three moieties of benzoxadiazole, thienopyrroledione, and benzodithiophene containing conjugated polymer; poly[BDT-alt-(TP;BO)] was used as a transducer modifier together with fullerene for catechol detection. The specific combination of these materials is considered an effective way to fabricate highly sensitive and fast response catechol biosensors for the first time. Electrochemical and surface characteristics of the modified electrodes were obtained by cyclic voltammetry, electrochemical impedance spectroscopy, scanning electron microscopy, and atomic force microscopy. The effect of the parameters during chronoamperometric measurements on the biosensor response was also studied. Using optimized conditions, biosensing of catechol was achieved between 0.5 and 62.5 µM with a limit of the detection 0.11 µM. Tyr inhibition was followed with INDO drug active compound and it was found that INDO has a mixed type characteristic of enzyme kinetics with an I₅₀ value of 15.11 µM.

Photocatalytic degradation of lomefloxacin antibiotics using hydrothermally synthesized magnesium titanate under visible light-driven energy sources

Antibiotics in water system pose a human health risk due to the rise of antibacterial activity in the environmental web. Advanced oxidation processes are the potential to become an effective treatment technology for targeting antibiotics. This study demonstrates the visible light photocatalysis of lomefloxacin using magnesium titanate (MgTiO₃). The nanomaterial was subjected to computational analysis to study morphology, functional, and optical characteristics through FESEM, XRD, FTIR, BET, UV-Vis, etc. Importantly, MgTiO₃ had band gap energy of 3.09 eV. The photocatalytic studies were performed to observe different parameters affecting lomefloxacin degradation such as initial concentration, catalyst dosage, and pH. The nanomaterial exhibited the maximum lomefloxacin degradation. The study revealed that 30 mg/L of catalyst was optimum to degrade 10 mg/L of lomefloxacin with 30-W LED irradiation up to 150 min. Reactive species, namely, electron, hole, hydroxyl, and superoxide radicals, comprised the primary photocatalytic mechanism for lomefloxacin degradation. Ultimately, the summative result from this study highlights the suitability of the photocatalytic system to treat persistent antibiotics in aqueous environment.

Electrochemical Sensing Systems for the Analysis of Catechol and Hydroquinone in the Aquatic Environments: A Critical Review

Because of their unique physical, chemical, and biological characteristics, conductive nanomaterials have a lot of potential for applications in materials science, energy storage, environmental science, biomedicine, sensors/biosensors, and other fields. Recent breakthroughs in the manufacture of carbon materials, conductive polymers, metals, and metal oxide nanoparticles based electrochemical sensors and biosensors for applications in environmental monitoring by detection of catechol (CC) and hydroquinone (HQ) are presented in this review. To achieve this goal, we first introduced recent works that discuss the effects of phenolic compounds and the need for accurate, inexpensive, and quick monitoring, and then we focused on the use of the most important applications of nanomaterials, such as carbon-based materials, metals, and metal oxides nanoparticles, and conductive polymers, to develop sensors to monitor catechol and hydroquinone. Finally, we identified challenges and limits in the field of sensors and biosensors, as well as possibilities and recommendations for developing the field for better future applications. Meanwhile, electrochemical sensors and biosensors for catechol and hydroquinone measurement and monitoring were highlighted and discussed particularly. This review, we feel, will aid in the promotion of nanomaterials for the development of innovative electrical sensors and nanodevices for environmental monitoring.

Dual-functional biocatalytic membrane containing laccase-embedded metal-organic frameworks for detection and degradation of phenolic pollutant

In this work, a metal-organic framework material, zeolitic imidazolate framework-90 (ZIF-90), was firstly used to encapsulate laccase (LAC) and to prepare ZIF-90/LAC biocomposites. Afterward, the composites were combined with bacterial cellulose (BC) and carboxylated multi-walled carbon nanotubes (c-MWCNTs) by a facile method to achieve a novel cellulose membrane with biocatalytic function, displaying excellent detection and degradation properties towards phenolic pollutant. Notably, the membrane was directly employed as a biosensor electrode, and it exhibited a linear response to catechol from 20 to 400 μM with a detection limit of 1.86 µM (S/N = 3), as well as satisfactory selectivity, reproducibility, and stability. In addition, the biocatalytic membrane showed higher degradation efficiency towards catechol than pure LAC, and the catechol degradation efficiency of the membrane generally ranged from 93.4% to 82.1% for five cycles. Moreover, the membrane was successfully applied in enzyme membrane reactor (EMR), achieving satisfactory results. The novel membrane harbors a broad application prospect in the fields of real-time monitor and treatment of phenolic wastewater.