Synthesis and characterization of magnetic biochar adsorbents for the removal of Cr(VI) and Acid orange 7 dye from aqueous solution

A polyfunctionalized carbon framework composite for efficient decontamination of Cr(VI) and polycyclic aromatic nitrides from acidic wastewater

Developing multifunctional engineered adsorbents is an effective strategy for decontaminating the environment from various pollutants. In this study, a polyfunctionalized carbon-framework composite, MSC-CFM, was synthesized. The composite comprises an aromatic carbon framework enriched with various functional groups, including magnetic nanoparticles, hydroxyl, and amino groups. MSC-CFM was used to decontaminate Cr(VI) and polycyclic aromatic nitrides (p-dimethylaminoazobenzene sulfonate (DAS) and diphenyl-4, 4 '-di [sodium (azo-2 -) -1-amino-naphthalene-4-sulfonate] (DANS)) from acidic wastewater. The adsorption capacities of MSC-CFM for Cr(VI), DAS and DANS, quantified using the Langmuir isotherm model, were 161.28, 310.83, and 1566.09 mg/g, respectively. Cr(VI) and PAHs (DAS and DANS) were monolayer adsorbed controlled by chemisorption. MSC-CFM could maintain good adsorption efficiency after up to 6 adsorption and desorption cycles. The presence of polycyclic aromatic nitrides promoted the adsorption of Cr(VI) in the Cr(VI)-DAS/DANS binary systems. Removal of pollutants by MSC-CFM involved a variety of unreported reaction mechanisms, such as electrostatic attraction, redox reaction, anion exchange, intermolecular hydrogen bonding, complexation reaction, π-π interaction, and anion-π interaction. MSC-CFM, enriched with a variety of functional groups, is a promising new material for environmental protection. It has good potential for practical application in treating polluted wastewater.

Unlocking the potential of magnetic biochar in wastewater purification: a review on the removal of bisphenol A from aqueous solution

Bisphenol A (BPA) is an essential and extensively utilized chemical compound with significant environmental and public health risks. This review critically assesses the current water purification techniques for BPA removal, emphasizing the efficacy of adsorption technology. Within this context, we probe into the synthesis of magnetic biochar (MBC) using co-precipitation, hydrothermal carbonization, mechanical ball milling, and impregnation pyrolysis as widely applied techniques. Our analysis scrutinizes the strengths and drawbacks of these techniques, with pyrolytic temperature emerging as a critical variable influencing the physicochemical properties and performance of MBC. We explored various modification techniques including oxidation, acid and alkaline modifications, element doping, surface functional modification, nanomaterial loading, and biological alteration, to overcome the drawbacks of pristine MBC, which typically exhibits reduced adsorption performance due to its magnetic medium. These modifications enhance the physicochemical properties of MBC, enabling it to efficiently adsorb contaminants from water. MBC is efficient in the removal of BPA from water. Magnetite and maghemite iron oxides are commonly used in MBC production, with MBC demonstrating effective BPA removal fitting well with Freundlich and Langmuir models. Notably, the pseudo-second-order model accurately describes BPA removal kinetics. Key adsorption mechanisms include pore filling, electrostatic attraction, hydrophobic interactions, hydrogen bonding, π-π interactions, and electron transfer surface interactions. This review provides valuable insights into BPA removal from water using MBC and suggests future research directions for real-world water purification applications.

Advancements in application of modified biochar as a green and low-cost adsorbent for wastewater remediation from organic dyes

Synthetic organic dyes, which are resistant to biodegradation, pose a notable health risk, potentially leading to cancer and respiratory infections. Researchers have addressed this concern by exploring physicochemical methods to remove organic dyes from wastewater. A particularly promising solution involves modified biochar adsorbents, which demonstrate high efficiency in organic dye removal. Biochar, a charcoal-like material derived from biomass pyrolysis, offers advantages such as low cost, eco-friendliness, high efficiency and reusability. Beyond its role in sustainable soil remediation, biochar proves effective in removing organic dyes from wastewater after undergoing physical or chemical modification. Acid-base activation or metal-heteroatom impregnation enhances biochar's adsorption capacity. This comprehensive review examines the attributes of biochar, common methods for production and modification, and the impacts of raw materials, pyrolysis temperature, heating rate and residence time. It further elucidates the biochar adsorption mechanism in the removal of organic dyes, assessing factors influencing efficiency, including biochar feedstock, solution pH, adsorption temperature, particle size, initial dye concentration, biochar dosage and reaction time. It explores challenges, opportunities, reusability and regeneration methods of biochar in treating organic dye wastewater. It also discusses recent advances in organic dye removal using adsorption-based biochar. The review ultimately advocates for enhancing biochar's adsorption performance through post-modification.

Efficient removal of Cr(VI) contaminant using recoverable silica from volcanic ash as natural adsorbent: Synthesis and activity in the mechanism and kinetic adsorption

Modification of silica purified from the Merapi volcanic ash with magnetic material of Fe3O4 and attachment of cetyl triamine bromide (CTA-Br) on the magnetic cored has been performed to provide recoverable and positive surfaced of natural adsorbent. The magnetic cored was prepared via co-precipitation and CTA-Br attachment was conducted by a facile strategy. Then, the modified adsorbents were characterized by SEM, TEM, XRD, and FTIR instruments and examined for removing anionic Cr(VI) from the water media. The characterization data confirmed that crystals of Fe3O4 coated by SiO2 that has been bound with CTA-Br have been successfully formed. Additionally, increasing CTA-Br loaded gives thicker lamination on Fe3O4@SiO2/CTA-Br, but the CTA-Br loaded with higher than 0.25 mmol, leads to the coating peeled out. It is also demonstrated that Fe3O4@SiO2/CTA-Br prepared with CTA-Br 0.25 mmol is ideal for Cr(VI) anionic removal, regarding to the highest adsorption and very good separation or recovery process. Moreover, the optimal dose of Fe3O4@SiO2/CTA-Br in the Cr(VI) removal was observed at 0.25 g/20 mL under condition of pH 3 for 60 min. The adsorption of Cr(VI) well fits the Langmuir isotherm model with an adsorption capacity of 3.38 mg g-1 and is in a good agreement with pseudo-second order giving kinetic constant at 0.005 g mg-1 min-1. Thus, it is clear that the natural adsorbent material with recoverable properties for more efficient and wider application of removal Cr(VI) contaminant was expected from this study.

Recent insights into mechanism of modified bio-adsorbents for the remediation of environmental pollutants

Rapid industrialization has exacerbated the hazard to health and the environment. Wide spectrums of contaminants pose numerous risks, necessitating their disposal and treatment. There is a need for further remediation methods since pollutant residues cannot be entirely eradicated by traditional treatment techniques. Bio-adsorbents are gaining popularity due to their eco-friendly approach, broad applicability, and improved functional and surface characteristics. Adsorbents that have been modified have improved qualities that aid in their adsorptive nature. Adsorption, ion exchange, chelation, surface precipitation, microbial uptake, physical entrapment, biodegradation, redox reactions, and electrostatic interactions are some of the processes that participate in the removal mechanism of biosorbents. These processes can vary depending on the particular biosorbent and the type of pollutants being targeted. The systematic review focuses on the many modification approaches used to remove environmental contaminants. Different modification or activation strategies can be used depending on the type of bio-adsorbent and pollutant to be remediated. Physical activation procedures such as ultrasonication and pyrolysis are more commonly used to modify bio-adsorbents. Ultrasonication process improves the adsorption efficiency by 15-25%. Acid and alkali modified procedures are the most effective chemical activation strategies for adsorbent modification for pollution removal. Chemical modification increases the removal to around 95-99%. The biological technique involving microbial culture is an emerging field that needs to be investigated further for pollutant removal. A short evaluation of modified adsorbents with multi-pollutant adsorption capability that have been better eliminated throughout the adsorption process has been provided.

Recent advances in the synthesis and application of magnetic biochar for wastewater treatment

Magnetic biochar (MBC) is a novel bio-carbon material with both desired properties as adsorbent and magnetic characteristics. This review provides an up-to-date summary and discussion on the latest development of MBC, which covers the progress on its synthesis, application, and techno-economic analysis. The review indicates that the direct hydrothermal synthesis has been catching more research attention to produce MBC due to its mild reaction conditions. Instead of the Fe-loaded MBC, there is a trend of using Mn for the magnetization. For the MBC application, how to improve its adsorption performance for water decontamination, ideally to match that of the biochar (BC) or activated carbon, is important. In addition, more studies on the environmental impacts of MBC and life-cycle assessment decoding the process optimization options are necessary. This review will provide valuable references for the development of MBC and MBC-based materials for wastewater treatment.

Enhancing degradation of organic matter in microbial electrolytic cells coupled with anaerobic digestion (MEC-AD) systems by carbon-based materials

Currently, little information is available on relative contributions among biochar (BC), activated carbon (AC), magnetic BC (MBC), and magnetic AC (MAC) to enhance the effectiveness of a microbial electrolytic cells coupled with anaerobic digestion (MEC-AD) system and the impact of carbon-based materials on microbial community. In this study, six anaerobic reactors were constructed to demonstrate the effects of different carbon-based materials on organic matter elimination in the MEC-AD system. Remarkably, the reactor containing MBC exhibited a significant increase in organic removal, achieving 95.0 % chemical oxygen demand (COD) eradication. Additionally, the MBC-added MEC-AD reactor yields acetic acid at a rate 2.9 times higher than that of the BC-added reactor. Electrical stimulation enriched electro-producing bacteria such as Pseudomonas (18.1 %) and Gordonia (6.8 %), which were further promoted by the addition of MBC, indicating that the microbial communities cultivated with the MBC could provide the necessary microbiome for the MEC.

Next-Generation Water Treatment: Exploring the Potential of Biopolymer-Based Nanocomposites in Adsorption and Membrane Filtration

This review article focuses on the potential of biopolymer-based nanocomposites incorporating nanoparticles, graphene oxide (GO), carbon nanotubes (CNTs), and nanoclays in adsorption and membrane filtration processes for water treatment. The aim is to explore the effectiveness of these innovative materials in addressing water scarcity and contamination issues. The review highlights the exceptional adsorption capacities and improved membrane performance offered by chitosan, GO, and CNTs, which make them effective in removing heavy metals, organic pollutants, and emerging contaminants from water. It also emphasizes the high surface area and ion exchange capacity of nanoclays, enabling the removal of heavy metals, organic contaminants, and dyes. Integrating magnetic (Fe2O4) adsorbents and membrane filtration technologies is highlighted to enhance adsorption and separation efficiency. The limitations and challenges associated are also discussed. The review concludes by emphasizing the importance of collaboration with industry stakeholders in advancing biopolymer-based nanocomposites for sustainable and comprehensive water treatment solutions.

Magnetic Biochar Obtained by Chemical Coprecipitation and Pyrolysis of Corn Cob Residues: Characterization and Methylene Blue Adsorption

Biochar is a carbonaceous and porous material with limited adsorption capacity, which increases by modifying its surface. Many of the biochars modified with magnetic nanoparticles reported previously were obtained in two steps: first, the biomass was pyrolyzed, and then the modification was performed. In this research, a biochar with Fe₃O₄ particles was obtained during the pyrolysis process. Corn cob residues were used to obtain the biochar (i.e., BCM) and the magnetic one (i.e., BCM_Fe). The BCM_Fe biochar was synthesized by a chemical coprecipitation technique prior to the pyrolysis process. The biochars obtained were characterized to determine their physicochemical, surface, and structural properties. The characterization revealed a porous surface with a 1013.52 m²/g area for BCM and 903.67 m²/g for BCM_Fe. The pores were uniformly distributed, as observed in SEM images. BCM_Fe showed Fe₃O₄ particles on the surface with a spherical shape and a uniform distribution. According to FTIR analysis, the functional groups formed on the surface were aliphatic and carbonyl functional groups. Ash content in the biochar was 4.0% in BCM and 8.0% in BCM_Fe; the difference corresponded to the presence of inorganic elements. The TGA showed that BCM lost 93.8 wt% while BCM_Fe was more thermally stable due to the inorganic species on the biochar surface, with a weight loss of 78.6%. Both biochars were tested as adsorbent materials for methylene blue. BCM and BCM_Fe obtained a maximum adsorption capacity (q_m) of 23.17 mg/g and 39.66 mg/g, respectively. The obtained biochars are promising materials for the efficient removal of organic pollutants.

Na4P2O7-Modified Biochar Derived from Sewage Sludge: Effective Cu(II)-Adsorption Removal from Aqueous Solution

With the rapid development of industrialization, the amount of copper-containing wastewater is increasing, thereby posing a threat to the aquatic ecological environment and human health. Sludge biochar has received extensive concern in recent years due to its advantages of low cost and sustainability for the treatment of heavy-metal-containing wastewater. However, the heavy-metal-adsorption capacity of sludge biochar is limited. This study prepared a sodium pyrophosphate- (Na4P2O7-) modified municipal sludge-based biochar (SP-SBC) and evaluated its adsorption performance for Cu(II). Results showed that SP-SBC had higher yield, ash content, pH, Na and P content, and surface roughness than original sewage sludge biochar (SBC). The Cu(II)-adsorption capacity of SP-SBC was 4.55 times than that of SBC at room temperature. For Cu(II) adsorption by SP-SBC, the kinetics and isotherms conformed to the pseudo-second-order model and the Langmuir–Freundlich model, respectively. The maximum adsorption capacity of SP-SBC was 38.49 mg·g−1 at 35°C. Cu(II) adsorption by SP-SBC primarily involved ion exchange, electrostatic attraction, and precipitation. The desired adsorption performance for Cu(II) in the fixed-bed column experiment indicated that SP-SBC can be reused and had good application potential to treat copper-containing wastewater. Overall, this study provided a desirable sorbent (SP-SBC) for Cu(II) removal, as well as a new simple chemical-modification method for SBC to enhance Cu(II)-adsorption capacity.

Membranes Coated with Graphene-Based Materials: A Review

Graphene is a popular material with outstanding properties due to its single layer. Graphene and its oxide have been put to the test as nano-sized building components for separation membranes with distinctive structures and adjustable physicochemical attributes. Graphene-based membranes have exhibited excellent water and gas purification abilities, which have garnered the spotlight over the past decade. This work aims to examine the most recent science and engineering cutting-edge advances of graphene-based membranes in regard to design, production and use. Additional effort will be directed towards the breakthroughs in synthesizing graphene and its composites to create various forms of membranes, such as nanoporous layers, laminates and graphene-based compounds. Their efficiency in separating and decontaminating water via different techniques such as cross-linking, layer by layer and coating will also be explored. This review intends to offer comprehensive, up-to-date information that will be useful to scientists of multiple disciplines interested in graphene-based membranes.

Adsorption performance of tetracycline by the biomass ash derived from the pyrolysis of FeCl3-activated municipal sludge without gas protection

The municipal sludge activated by FeCl3 solution was pyrolyzed at 500 °C without gas protection, and the pyrolysis products, named as biomass ash, could effectively adsorb tetracycline (TC) from aqueous solution. Different FeCl3 concentrations could directly affect the physicochemical properties of the biomass ash, so that the biomass ash as adsorbent showed different adsorption efficiency toward TC. The activation of FeCl3 increased the oxygen-containing functional groups and surface polarities of the biomass ash. When the concentration of FeCl3 solution was 0.5 mol/L, the biomass ash behaved the maximum specific surface area (37.74 m2/g) and the best adsorption efficiency. The pseudo-second-order kinetics model and the Freundlich multi-molecule model could fully explain the TC adsorption process by the biomass ash pyrolyzed from municipal sludge activated by FeCl3. Moreover, the adsorption mechanism was mainly attributed to the chemical adsorption.

A Fe3O4 nanospheres/carbon core–shell structure for effective removal of pollutants from water

The treatment of wastewater by adsorption is a good alternative technique and attracts extensive attention worldwide due to its versatility, scalability, and low operational costs. In this work, a Fe3O4 nanospheres/carbon core–shell structure is fabricated by combination of a template method and calcination. The morphology and crystal structure of the synthesized composite are characterized by transmission electron microscopy, X-ray powder diffraction, Fourier transform infrared spectrometer, and from nitrogen adsorption–desorption isotherms, confirming that the carbon layer with a porous structure is successfully loaded onto the surface of the face-centered cubic Fe3O4 nanospheres to form a core–shell structure. The adsorption performance of the Fe3O4 nanospheres/carbon core–shell structure is investigated by studying the effects of the initial pH value of the solution, the contact time, the initial concentration of the pollutants, the adsorption temperature, and the amount of adsorbent. The Fe3O4 nanospheres/carbon core–shell structure effectively removes heavy metal Chromium(VI) and a reactive light yellow dye. The results of batch experiments show that the removal efficiencies of heavy metal Chromium(VI) and the reactive light yellow dye are close to 100% under optimized conditions. The good adsorption performance of the Fe3O4 nanospheres/carbon core–shell structure toward various types of pollutants suggests a potential application in wastewater treatment.

Maize Stalk Obtained after Acid Treatment and Its Use for Simultaneous Removal of Cu2+, Pb2+, Ni2+, Cd2+, Cr3+ and Fe3

In this research, eco-friendly material represented by maize stalk (MS) obtained after acid treatment was employed for simultaneous removal of Cu2+, Pb2+, Ni2+, Cd2+, Cr3+ and Fe3+ (MX+) from simulated textile aqueous matrix and tannery wastewater produced by the leather industry. The acid treatment of MS was done with 4 M HCl. The influence of experimental parameters was evaluated in order to optimize the adsorption process for simulated textile matrix. The contact time 10-60 min and initial concentration of 0.5-1 mg/L MX+ influence were studied by batch method. Additionally, the adsorption data of MX+ onto MS was fitting by kinetic and isotherm models. The results obtained showed that the 60 min was necessary to reach adsorption equilibrium of the MS. The adsorption capacity of MS was 0.052 mg Cu2+/g of MS, 0.024 mg Pb2+/g of MS, 0.042 mg Ni2+/g of MS, 0.050 mg Cd2+/g of MS, 0.056 mg Fe3+/g of MS and 0.063 mg Cr3+/g of MS at pH = 4.2. The Langmuir model described the adsorption process very well. The MS showed huge selectivity for Cr3+ and Fe3+ in the presence of Cu2+, Pb2+, Ni2+ and Cd2+. The adsorption of MX+ from liquid phases were analyzed by spectrometric adsorption method (AAS). The solid phases of MS before and after adsorption by TG and SEM analysis were characterized. When MS was used for removal of MX+ from tannery wastewater, two major issues were investigated: First, the decrease of MX+ content from highly polluted and difficult to treat tannery wastewaters by improve its quality and in the second part, specific recovery of MX+ from MS mass increasing the economic efficiency of metals production based on green technology.

A comparison between the characteristics of a biochar-NPK granule and a commercial NPK granule for application in the soil

Continual application of nitrogen (N), phosphorous (P) and potassium (K) fertilizer may not return a profit to farmers due to the costs of application and the loss of NPK from soil in various ways. Thus, a combination of NPK granule with a porous biochar (termed here as BNPK) appears to offer multiple benefits resulting from the excellent properties of biochar. Given the lack of information on the properties of NPK and BNPK fertilizers, it is necessary to investigate the characteristics of both to achieve a good understanding of why BNPK granule is superior to NPK granule. Therefore, this study aims to investigate the characteristics of a maize straw biochar mixed with NPK granule, before and after application to soil, and compare them to those for a commercial NPK granule. The BNPK granule, with a greater surface area and porosity, showed a higher capacity to store and donate electrons than the NPK granule. Relatively lower concentrations of Ca, P, K, Si and Mg were dissolved from the BNPK, indicating the ability of the BNPK granule to maintain these mineral elements and reduce dissolution rate. To study the nutrient storage mechanism of the BNPK granule in the soil, short- and long-term leaching experiments were conducted. During the experiments, organo-mineral clusters, comprising C, P, K, Si, Al and Fe, were formed on the surface and inside the biochar pores. However, BNPK was not effective in reducing N leaching, in the absence of plants, in a red chromosol soil.

Potential of nanocomposites of zero valent copper and magnetite with Eleocharis dulcis biochar for packed column and batch scale removal of Congo red dye

The current study is the first attempt to prepare nanocomposites of Eleocharis dulcis biochar (EDB) with nano zero-valent Copper (nZVCu/EDB) and magnetite nanoparticles (MNPs/EDB) for batch and column scale sequestration of Congo Red dye (CR) from synthetic and natural water. The adsorbents were characterized with advanced analytical techniques. The impact of EDB, MNPs/EDB and nZVCu/EDB dosage (1-4 g/L), pH (4-10), initial concentration of CR (20-500 mg/L), interaction time (180 min) and material type to remove CR from water was examined at ambient temperature. The CR removal followed sequence of nZVCu/EDB > MNPs/EDB > EDB (84.9-98% > 77-95% > 69.5-93%) at dosage 2 g/L when CR concentration was increased from 20 to 500 mg/L. The MNPs/EDB and nZVCu/EDB showed 10.9% and 20.1% higher CR removal than EDB. The adsorption capacity of nZVCu/EDB, MNPs/EDB and EDB was 212, 193 and 174 mg/g, respectively. Freundlich model proved more suitable for sorption experiments while pseudo 2nd order kinetic model well explained the adsorption kinetics. Fixed bed column scale results revealed excellent retention of CR (99%) even at 500 mg/L till 2 h when packed column was filled with 3.0 g nZVCu/EDB, MNPs/EDB and EDB. These results revealed that nanocomposites with biochar can be applied efficiently for the decontamination of CR contaminated water.

Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: Recent progress, challenges, and future perspectives

Due to their numerous effects on human health and the natural environment, water contamination with heavy metals and metalloids, caused by their extensive use in various technologies and industrial applications, continues to be a huge ecological issue that needs to be urgently tackled. Additionally, within the circular economy management framework, the recovery and recycling of metals-based waste as high value-added products (VAPs) is of great interest, owing to their high cost and the continuous depletion of their reserves and natural sources. This paper reviews the state-of-the-art technologies developed for the removal and recovery of metal pollutants from wastewater by providing an in-depth understanding of their remediation mechanisms, while analyzing and critically discussing the recent key advances regarding these treatment methods, their practical implementation and integration, as well as evaluating their advantages and remaining limitations. Herein, various treatment techniques are covered, including adsorption, reduction/oxidation, ion exchange, membrane separation technologies, solvents extraction, chemical precipitation/co-precipitation, coagulation-flocculation, flotation, and bioremediation. A particular emphasis is placed on full recovery of the captured metal pollutants in various reusable forms as metal-based VAPs, mainly as solid precipitates, which is a powerful tool that offers substantial enhancement of the remediation processes' sustainability and cost-effectiveness. At the end, we have identified some prospective research directions for future work on this topic, while presenting some recommendations that can promote sustainability and economic feasibility of the existing treatment technologies.

Recent advances in magnetic composites as adsorbents for wastewater remediation

The scarcity of clean drinking water combined with other environmental and anthropogenic effects necessitates the demand for development of advanced technology for cleaning polluted water. Adsorption is one such technique that does not produce toxic byproducts and solves the problem of cleaning contaminated water at a lower cost. In recent years, magnetic composites, as adsorbent, have gained lot of attention due to their reusability which makes them sustainable and economical. This review article describes the challenges related to water quality, scarcity and then summarizes the current treatment technologies and advancement in the field of adsorption to resolve the prevailing concerns. The review includes an insight into the recent research being carried out in the field of magnetic composites and nanocomposites, as adsorbent, covering, probably, all aspects of what is going around the globe. Different materials, like polymers, biomaterials, clays and metal organic framework (MOF)-based magnetic composites and their applications in wastewater treatment processes have been included. The article is a comprehensive review on the application of different materials to detoxify various diverse pollutants with prime focus on magnetic composites. The thorough study of this review will surely bring upcoming researchers closer to the future possibilities of research in wastewater treatment.

Recent development of magnetic biochar crosslinked chitosan on heavy metal removal from wastewater - Modification, application and mechanism

Heavy metal contamination in water bodies is currently in an area of greater concern due to the adverse effects on human health. Despite the good adsorption performance of biochar, various modifications have been performed on the pristine biochar to further enhance its adsorption capability, at the same time overcome the difficulty of particles separation and mitigate the secondary pollution issues. In this review, the feasibility of chitosan-modified magnetic biochar for heavy metal removal from aqueous solution is evaluated by critically analysing existing research. The effective strategies that applied to introduce chitosan and magnetic substances into the biochar matrix are systematically reviewed. The physicochemical changes of the modified-biochar composite are expounded in terms of surface morphology, pore properties, specific surface area, surface functional groups and electromagnetism. The detailed information regarding the adsorption performances of various modified biochar towards different heavy metals and their respective underlying mechanisms are studied in-depth. The current review also analyses the kinetic and isotherm models that dominated the adsorption process and summarizes the common models that fitted well to most of the experimental adsorption data. Moreover, the operating parameters that affect the adsorption process which include solution pH, temperature, initial metal concentration, adsorbent dosage, contact time and the effect of interfering ions are explored. This review also outlines the stability of modified biochar and their regeneration rate after cycles of heavy metal removal process. Lastly, constructive suggestions on the future trends and directions are provided for better research and development of chitosan-modified magnetic biochar.

Sewage sludge-derived biochar for the adsorptive removal of wastewater pollutants: A critical review

The production of biochar from sewage sludge pyrolysis is a promising approach to transform the waste resultant from wastewater treatment plants (WWTPs) to a potential adsorbent. The current review provides an up-to-date review regarding important aspects of sewage sludge pyrolysis, highlighting the process that results major solid fraction (biochar), as high-value product. Further, the physio-chemical characteristics of sewage-sludge derived biochar such as the elemental composition, specific surface area, pore size and volume, the functional groups, surface morphology and heavy metal content are discussed. Recent progress on adsorption of metals, emerging pollutants, dyes, nutrients and oil are discussed and the results are examined. The sewage sludge-derived biochar is a promising material that can make significant contributions on pollutants removal from water by adsorption and additional benefit of the management of huge volume of sewage. Considering all these aspects, this field of research still needs more attention from the researchers in the direction of the technological features and sustainability aspects.

Sustainable synthesis of rose flower-like magnetic biochar from tea waste for environmental applications

Introduction

Biochar utilization for adsorption seems to be the most cost-effective, easy/fast approach for pollutants removal from water and wastewater. Due to the high adsorption properties, magnetic biochar proved to be efficient in the sorption of heavy metals and nutrients. Although there are several studies on development of magnetic biochars, there is a lack of research on development of high-performance magnetic biochar from food waste for removal applications.

Objectives

This study aimed at preparing new classes of magnetic biochar derived from tea waste (TBC) for removal of heavy metals (Ni²⁺, Co²⁺), and nutrients (NH₄⁺ and PO₄³⁻) from water and effective fertilizer (source of NH₄⁺ and PO₄³⁻).

Methods

Standard carbonization process and ultrafast microwave have been used for fabrication of TBCs. The removal of nickel, cobalt as the representatives of heavy metals, and over-enriched nutrients (NH₄⁺ and PO₄³⁻) from water were tested and the removal kinetics, mechanism, and the effect of pH, dissolved organic matter and ionic strength were studied. Simultaneously, possible fertilizing effect of TBC for controlled release of nutrients (NH₄⁺ and PO₄³⁻) in soil was investigated.

Results

Up to 147.84 mg g⁻¹ of Ni²⁺ and 160.00 mg g⁻¹ of Co²⁺ were adsorbed onto tested biochars. The process of co-adsorption was also efficient (at least 131.68 mg g⁻¹ of Co²⁺ and 160.00 mg g⁻¹ of Ni²⁺). The highest adsorbed amount of NH₄⁺ was 49.43 mg g⁻¹, and the highest amount of PO₄³⁻ was 112.61 mg g⁻¹. The increase of the solution ionic strength and the presence of natural organic matter affected both the amount of adsorbed Ni²⁺+Co²⁺ and the reaction mechanism.

Conclusions

The results revealed that magnetic nanoparticle impregnated onto tea biochar, can be a very promising alternative for wastewater treatment especially considering removal of heavy metals and nutrients and slow-release fertilizer to improve the composition of soil elements.

Rice Straw Biochar and Magnetic Rice Straw Biochar for Safranin O Adsorption from Aqueous Solution

This study investigates the adsorption of Safranin O (SO) from aqueous solution by both biochar and magnetic biochar derived from rice straw. Rice straw biochar (RSB) was made by pyrolysis in a furnace at 500 °C, using a heating rate of 10 °C·min−1 for 2 h in an oxygen-limited environment, whilst the magnetic rice straw biochar (MRSB) was produced via the chemical precipitation of Fe2+ and Fe3+. The physicochemical properties of the synthesized biochars were characterized using SEM, SEM- EDX, XRD, FTIR techniques, and N2 adsorption (77 K) and pHpzc measurements. Batch adsorption experiments were used to explore the effect of pH, biochar dosage, kinetics, and isotherms on the adsorption of SO. Experimental data of RSB and MRSB fit well into both Langmuir and Freundlich isotherm models, and were also well-explained by the Lagergren pseudo-second-order kinetic model. The maximum SO adsorption capacity of MRSB was found to be 41.59 mg/g, while for RSB the figure was 31.06 mg/g. The intra-particle diffusion model indicated that the intra-particle diffusion may not be the only rate-limiting step. The collective physical and chemical forces account for the adsorption mechanism of SO molecules by both RSB and MRSB adsorbents. The obtained results demonstrated that the magnetic biochar can partially enhance the SO adsorption capacity of its precursor biochar and also be easily separated from the solution by using an external magnet.

Efficiency of iron modified Pyrus pyrifolia peels biochar as a novel adsorbent for methylene blue dye abatement from aqueous phase: equilibrium and kinetic studies

Herein, a magnetic biochar adsorbent based on Pyrus pyrifolia discarded peels impregnated with precursor FeCl_3·6H₂O was fabricated and probed as a low-cost adsorbent for toxic cationic dye methylene blue (MB). The textural characterization of Pyrus pyrifolia magnetic biochar (PMBC) obtained from BET analysis exhibited its mesoporous nature with S_BET of 133.960 m²/g. The physicochemical characteristics of PMBC were elucidated using XRD, FTIR, SEM-EDX and TEM techniques. The impregnation of FeCl₃ has a significant impact on the microstructure of Pyrus pyrifolia based biochar which resulted in enhancement in adsorption efficiency of PMBC. The sorption parameters adsorbent dosage, time, initial MB concentration, and pH were thoroughly elucidated using a batch methodology which were found to be 0.8 g/L, 40 min, 90 mg/L and 6, respectively. Temkin and pseudo-second-order rate equation respectively appropriated the equilibrium data than the rest of the models. The maximum adsorption capacity determined by the Langmuir model was found to be 967.80 mg/g. The adsorbent exhibited better regeneration up to 3 cycles validating its practical usage. The facile synthesis, economic, and environmentally benign characteristic of Pyrus pyrifolia magnetic biochar corroborated it as a highly efficient adsorbent to sequester MB from an aqueous phase.

Removal of organic contaminants from wastewater with GO/MOFs composites

Graphene oxide/metal-organic frameworks (GO/MOFs) have been prepared via solvothermal synthesis with ferrous sulfate heptahydrate, zirconium acetate and terephthalic acid for the purpose of removing organic pollutants from wastewater. The composites were analyzed using scanning electron microscopy, infrared spectrometry, and XRD. Tetracycline hydrochloride and orange II were implemented as model pollutants to evaluate the efficacy of the GO/MOFs in water purification, in which 50 mg of Zr/Fe-MOFs/GO was mixed with 100 mL of 10 mg/L, 20 mg/L, 30 mg/L, or 50 mg/L tetracycline hydrochloride solution and 25 mg/L, 35 mg/L, 45 mg/L, or 60 mg/L orange II solution, respectively. The removal efficacy after 4 hours was determined to be 96.1%, 75.8%, 55.4%, and 30.1%, and 98.8%, 91.9%, 71.1%, and 66.2%, respectively. The kinetics of pollutant removal was investigated for both tetracycline hydrochloride and orange II and excellent correlation coefficients of greater than 0.99 were obtained. The high efficacy of these MOFs in pollutant removal, coupled with their inexpensive preparation indicates the feasibility of their implementation in strategies for treating waste liquid. As such, it is anticipated that Zr/Fe-MOFs/GO composites will be widely applied in wastewater purification.

Scale-up one-pot synthesis of waste collagen and apple pomace pectin incorporated pentapolymer biocomposites: Roles of waste collagen for elevations of properties and unary/ ternary removals of Ti(IV), As(V), and V(V)

Herein, hazardous solid particulate waste collagenic fibers (SWCFs) of leather industries were incorporated into apple pomace pectin (APPN)-grafted-pentapolymer, i.e., APPN-g-[sodium 2-methylidenebutanedioate(SMBD)-co-N-((3-(isopropylamino)-3-oxopropoxy) methyl) butyramide (CM1)-co-N-(hydroxymethyl)prop-2-enamide (NHMPE)-co-N-(hydroxymethyl)-4-(N-isopropylbutyramido)butanamide (CM2)-co-N-(propan-2-yl)prop-2-enamide NPYPE)/ PENP1], i.e., APPN-g-PENP1/ PENP2, prepared via one-pot facile polymerization of APPN and synthetic monomers, i.e., SMBD, NHMPE, and NPYPE, in aqueous medium, to fabricate an optimum multifunctional hybrid biocomposite adsorbent/ HCOM3. In PENP1, PENP2, and HCOM3, fourth/ CM1 and fifth/ CM2 multifunctional comonomers were anchored in situ. The structures of PENP1, PENP2, HCOM3, CM1, CM2, and metal-ion adsorbed HCOM3; APPN-grafting; SWCF incorporation; and surface properties were analyzed through NMR, XPS, FTIR, XRD, and SEM. The elevated adsorption efficiencies (AEs), reusability, thermostability, swelling, network durability, and crosslink density of HCOM3 were attributed to variable functionalities of SWCF/ APPN, explored by DLS and TGA, swelling, network, and thermodynamic parameters. Compared to SWCF, APPN, PENP1, and PENP2, the elevated AEs and reusability compelled HCOM3 as more suitable for scalable waste management. The maximum AEs, i.e., 171.79, 180.47, and 177.27 mg g^-1, for Ti(IV), As(V), and V(V) at pH_op = 7.0, 3.0, and 5.0, respectively, within 5-100 mg L^-1 and at 298 K for 25 mg HCOM3 deteriorated during ternary adsorption by the antagonistic effects.