Facile preparation of L-cysteine-modified cellulose microspheres as a low-cost adsorbent for selective and efficient adsorption of Au(III) from the aqueous solution

Catch and release: Gold adsorption and sorbent electrochemical regeneration

Wastewater generated from e-waste leaching is rich in precious metals including gold, silver and platinum. Conventional precipitation and solvent extraction are chemically intensive separations with concerning environmental externalities. Sorbents, in particular carbon nanotubes, have low chemical consumption, and have shown promise for gold adsorption due to their high specific surface area and chemical functionalization potential. However, regenerating sorbents used to adsorb Au is hazardous requiring strong acids. Herein, we delineate the effect of various functional groups on the sidewalls of multiwall carbon nanotubes (MWCNTs) on gold adsorption, and we introduced an acid-free electrochemical technique for Au elution from MWCNTs. Pristine MWCNTs (P-MWCNTs), carboxylic functionalised MWCNTs (COOH-MWCNTs) and amide functionalised MWCNTs (NH2-MWCNTs) were compared for their affinity for Au adsorption from acidic AuCl4-solutions mimicking acidic e-waste leachate. Au adsorption affinity onto MWCNTs followed the order of P-MWCNT > NH2-MWCNT > COOH-MWCNTs. Au elution from Au-saturated MWCNTs was subsequently achieved up to 65%, using acid-free electrochemical desorption in neutral aqueous brine. The Au electro-desorption was shown to have a direct relationship with both the applied current and the mass of the Au adsorbed on the MWCNTs. This study demonstrates enhanced adsorption-based preconcentration of gold and acid-free regeneration of sorbents.

Emerging environmentally friendly bio-based nanocomposites for the efficient removal of dyes and micropollutants from wastewater by adsorption: a comprehensive review

Water scarcity will worsen due to population growth, urbanization, and climate change. Addressing this issue requires developing energy-efficient and cost-effective water purification technologies. One approach is to use biomass to make bio-based materials (BBMs) with valuable attributes. This aligns with the goal of environmental conservation and waste management. Furthermore, the use of biomass is advantageous because it is readily available, economical, and has minimal secondary environmental impact. Biomass materials are ideal for water purification because they are abundant and contain important functional groups like hydroxyl, carboxyl, and amino groups. Functional groups are important for modifying and absorbing contaminants in water. Single-sourced biomass has limitations such as weak mechanical strength, limited adsorption capacity, and chemical instability. Investing in research and development is crucial for the development of efficient methods to produce BBMs and establish suitable water purification application models. This review covers BBM production, modification, functionalization, and their applications in wastewater treatment. These applications include oil-water separation, membrane filtration, micropollutant removal, and organic pollutant elimination. This review explores the production processes and properties of BBMs from biopolymers, highlighting their potential for water treatment applications. Furthermore, this review discusses the future prospects and challenges of developing BBMs for water treatment and usage. Finally, this review highlights the importance of BBMs in solving water purification challenges and encourages innovative solutions in this field.

Novel metal peroxide nanoboxes restrain Clostridioides difficile infection beyond the bactericidal and sporicidal activity

Clostridioides difficile spores are considered as the major source responsible for the development of C. difficile infection (CDI), which is associated with an increased risk of death in patients and has become an important issue in infection control of nosocomial infections. Current treatment against CDI still relies on antibiotics, which also damage normal flora and increase the risk of CDI recurrence. Therefore, alternative therapies that are more effective against C. difficile bacteria and spores are urgently needed. Here, we designed an oxidation process using H2O2 containing PBS solution to generate Cl- and peroxide molecules that further process Ag and Au ions to form nanoboxes with Ag-Au peroxide coat covering Au shell and AgCl core (AgAu-based nanoboxes). The AgAu-based nanoboxes efficiently disrupted the membrane structure of bacteria/spores of C. difficile after 30-45 min exposure to the highly reactive Ag/Au peroxide surface of the nano structures. The Au-enclosed AgCl provided sustained suppression of the growth of 2 × 107 pathogenic Escherichia coli for up to 19 days. In a fecal bench ex vivo test and in vivo CDI murine model, biocompatibility and therapeutic efficacy of the AuAg nanoboxes to attenuate CDI was demonstrated by restoring the gut microbiota and colon mucosal structure. The treatment successfully rescued the CDI mice from death and prevented their recurrence mediated by vancomycin treatment. The significant outcomes indicated that the new peroxide-derived AgAu-based nanoboxes possess great potential for future translation into clinical application as a new alternative therapeutic strategy against CDI.

Mechanochemical synthesis of cysteine-gum acacia intermolecular complex for multiple metal(loid) sequestration from herbal extracts

The ubiquitous heavy metal(loid)s (HMs) contamination has triggered great concern about food safety, while sequestration and separation of trace HMs from herbal extracts still calls for appropriate sorbent materials. In this work, gum acacia was modified by cysteine to form a cysteine-acacia intermolecular complex (Cys-GA complex) via facile mechanochemical synthesis, aiming at capturing multiple HMs simultaneously. Preliminary screening confirms the superiority of Cys-CA complex for both cationic and anionic HMs, and determines an optimum Cys/GA mass ratio of 9:1 to achieve high removal capacities for Pb(II) (938 mg g-1), Cd(II) (834 mg g-1), As(V) (496 mg g-1), and Cr(VI) (647 mg g-1) in simulated aqueous solution. The analysis on HMs-exhausted Cys-GA complex indicates that Pb(II), As(V), and Cr(VI) tend to be removed through chelation, electrostatic attraction, and reduction, while Cd(II) can only be chelated or adsorbed by electrostatic interaction. The batch experiments on commercial herbal (e.g. Panax ginseng, Glycine max, Sophora flavescens, Gardenia jasminoides, Cyclocarya paliurus, and Bamboo leaf) extracts indicate that Cys-GA complex can reduce HMs concentration to attain acceptable level that comply with International Organization for Standardization, with negligible negative effect on its active ingredients. This work provides a practical and convenient strategy to purify HMs-contaminated foods without introducing secondary pollution.

Simultaneous removal of aqueous same ionic type heavy metals and dyes by a magnetic chitosan/polyethyleneimine embedded hydrophobic sodium alginate composite: Performance, interaction and mechanism

Heavy metals and azo dyes caused huge harm to the aqueous system and human health. A magnetic chitosan/polyethyleneimine embedded hydrophobic sodium alginate composite (MCPS) was designed and prepared to simultaneously remove aqueous same ionic type heavy metals and azo dyes. In mono-polluted system, the optimal pH for Cr(VI), MO (methyl orange), Cu(Ⅱ) and MB (methylene blue) were 3, 2, 6 and 12 with a saturated adsorption capacity of 87.53, 66.41, 351.03 and 286.54 mg/g, respectively. Pseudo-second-order was suitable to describe the adsorption kinetics of them and the adsorption isotherms were more consistent with the Langmuir isotherm model being a spontaneous, endothermic, and entropy-increasing process. In binary-polluted system, MCPS possessed simultaneous adsorption for Cr (Ⅵ)-MO and Cu(Ⅱ)-MB pollutants at their optimal pH, in addition, whether in anionic or cationic solution, the removal of heavy metals were promoted with the add of azo dyes but the removal of azo dyes were suppressed with the add of heavy metals. Both Cr (Ⅵ)-MO and Cu(Ⅱ)-MB pollutants could be effectively adsorbed and desorbed from MCPS by changing the pH of the aqueous solution to realize recyclability. Lastly, removal mechanism was revealed in detail by FT-IR, EDS and XPS.

Preclinical safety assessment of red emissive gold nanocluster conjugated crumpled MXene nanosheets: a dynamic duo for image-guided photothermal therapy

Red emissive gold nanoclusters have potential as biological fluorescent probes, but lack sufficient light-to-heat conversion efficiency for photothermal therapy (PTT). MXene nanomaterials, on the other hand, have shown promise in PTT due to their strong near-infrared absorption abilities, but their instability caused by restacking of the sheets can decrease their available surface area. One approach to address this issue is to design sheets with wrinkles or folds. However, the crumpled or 3D MXene materials reported in the literature are actually aggregates of multiple nanosheets rather than a single sheet that is folded. In this study, a modified method for crumpling a single MXene sheet and further conjugating it with red emissive gold nanoclusters and folic acid was developed. A detailed in vitro toxicity study was performed in various cell lines and cellular uptake in cancer cells was studied using AFM to understand its interaction at the nano-bio interface. The material also demonstrated excellent utility as a bioimaging and PTT agent in vitro, with its high fluorescence allowing bioimaging at a lower concentration of 12 μg mL^-1 and a photothermal conversion efficiency of 43.51%. In vitro analyses of the cell death mechanisms induced by PTT were conducted through studies of apoptosis, cell proliferation, and ROS production. In vivo acute toxicity tests were conducted on male and female Wistar rats through oral and intravenous administration (20 mg kg^-1 dose), and toxicity was evaluated using various measures including body weight, hematology, serum biochemistry, and H&E staining. The findings from these studies suggest that the MXene gold nanoconjugate could be useful in a range of biomedical applications, with no observed toxicity following either oral or intravenous administration.

Selective and Effective Gold Recovery from Printed Circuit Boards and Gold Slag Using Amino-Acid-Functionalized Cellulose Microspheres

The hydrometallurgical recovery of gold from electronic waste and gold slag is a hot research topic. To develop a cost-effective and environmentally friendly adsorbent for gold recovery, four types of amino-acid (arginine, histidine, methionine, and cysteine)-functionalized cellulose microspheres were prepared via a radiation technique. The adsorption performance of the amino acid resins toward Au(III) ions was systematically investigated by batch experiments. The amino acid resins could absorb Au(III) ions at a wide pH range. The adsorption process was followed by the pseudo-second-order model and Langmuir model. The theoretical maximum adsorption capacity was calculated as 396.83 mg/g, 769.23 mg/g, 549.45 mg/g, and 636.94 mg/g for ArgR, HisR, MetR, and CysR, respectively. The amino acid resins could effectively and selectively recover trace Au(III) ions from the leaching solutions of printed circuit board and gold slag waste. Lastly, the mechanism underlying amino acid resin's Au(III) ion recovery capability was investigated by FTIR, XRD, and XPS analyses. This work describes a series of cost-effective gold adsorbents with excellent selectivity and adsorption capacity to boost their practical application.

A Review on the Modification of Cellulose and Its Applications

The latest advancements in cellulose and its derivatives are the subject of this study. We summarize the characteristics, modifications, applications, and properties of cellulose. Here, we discuss new breakthroughs in modified cellulose that allow for enhanced control. In addition to standard approaches, improvements in different techniques employed for cellulose and its derivatives are the subject of this review. The various strategies for synthetic polymers are also discussed. The recent advancements in polymer production allow for more precise control, and make it possible to make functional celluloses with better physical qualities. For sustainability and environmental preservation, the development of cellulose green processing is the most abundant renewable substance in nature. The discovery of cellulose disintegration opens up new possibilities for sustainable techniques. Based on the review of recent scientific literature, we believe that additional chemical units of cellulose solubility should be used. This evaluation will evaluate the sustainability of biomass and processing the greenness for the long term. It appears not only crucial to dissolution, but also to the greenness of any process.

Removal of both anionic and cationic dyes from wastewater using pH-responsive adsorbents of L-lysine molecular-grafted cellulose porous foams

High adsorption efficiency, active to both anionic and cationic dyes and simple desorption are three main challenges of the existed adsorbents for decolorization of the dye-contained wastewaters. Porous foams based on L-lysine (Lys) molecular-grafted cellulose were firstly designed and fabricated to overcome those challenges. Cellulose were grafted with Lys in 1-butyl-3-methylimidazolium chloride (BMIMCl) via a chemical connection resulted from glycidyl methacrylate (GMA). The synthesized cellulose derivative (Cell-g-PGMA-Lys) was regenerated in the morphology of foam by non-solvent induced phase inversion from the BMIMCl-based solutions. The presence of Lys moieties and porous structure of Cell-g-PGMA-Lys were confirmed with a series of instrumental analysis. Both anionic reactive brilliant red X-3B (RBR X-3B) and cationic methylene blue (MB) were effectively adsorbed on and desorbed from Cell-g-PGMA-Lys by adjusting the solution pH value. Cell-g-PGMA-Lys had higher adsorption capacities than most of the reported adsorbents and was easy to separate from the decolorized water. It could be reused many times with little reduction of the adsorption capacity, which remained 86.9% and 92.5% for RBR X-3B and MB respectively after six adsorption-desorption cycles. The isothermal and kinetic adsorption proved that dyes were adsorbed single-layered on Cell-g-PGMA-Lys depending upon the electrostatic interaction between adsorbent and adsorbate.

Recent progress in environmental applications of functional adsorbent prepared by radiation techniques: A review

Environmental pollution has been accelerated due to fast urbanization and industrialization, and thus hazardous contaminants removal and valuable metal recovery have become urgent. Adsorption has become a promising technology for water treatment because of its advantages of low-cost, good reusability, low energy consumption, high capacity and high selectivity. Particularly, radiation techniques including radiation induced graft copolymerization and radiation crosslinking have been found to be widely utilized to exploit adsorbents for water treatment. In this review, the current status and progress of adsorbents in environmental pollution in the past decade are summarized, including adsorbents (in form of particles, fiber and fabric, membrane, novel nanomaterials) synthesized by radiation induced graft copolymerization and hydrogel-based adsorbents fabricated by radiation crosslinking. Finally, further perspective on the development and challenge of adsorbents by radiation techniques is also suggested.

Efficient separation and recovery of Re(VII) from Re/U bearing acidic solutions using aminotriazole modified cellulose microsphere adsorbents

In this work, aminotriazole-modified microcrystalline cellulose microsphere (3-ATAR) containing an abundant nitrogen content as promising adsorbent was prepared via a radiation grafting method for the selective recovery ReO₄^- in the presence of UO₂²⁺ in acidic solution. A series of batch and column adsorption experiments including monocomponent and binary systems were designed for evaluating the adsorption and separation performance of Re(VII) onto 3-ATAR. The 3-ATAR exhibited a good adsorption capacity (max 146.4 mg·g^-1) of Re(VII) and a rapid adsorption rate, with equilibrium time of 45 min. In binary solution, the high selectivity coefficients (β_Re/M) indicated that 3-ATAR could separate and recover Re(VII) from U(VI) and other metal ions (Cu(II), Cr(III), Ni(II), Zn(II)). In particular, it was found that the adsorption of Re was almost unaffected in U/Re-bearing solutions no matter how much the U(VI) was changed. In the column experiment, when the concentration of U(VI) was 40 times higher than that of Re(VII), 3-ATAR manifested high Re(VII) selectivity over U(VI) from a synthetic uranium ore leachate. This work demonstrated that 3-ATAR could provide an efficient, selectively, sustainable, and industrially feasible way for Re(VII) to be recovered from uranium ore leachate and other prospective sources.Graphical abstract.

All-cellulose functional membranes for water treatment: Adsorption of metal ions and catalytic decolorization of dyes

In this study, we present a facile, one-step method for the manufacturing of all-cellulose, layered membranes containing cellulose nanocrystals (CNC), TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl radical)-mediated oxidized cellulose nanofibers (TO-CNF), or zwitterionic polymer grafted cellulose nanocrystals (CNC-g-PCysMA) as functional entities in combination with cellulose fibers and commercial grade microfibrillated cellulose. The presence of active sites such as hydroxyl, carbonyl, thioethers, and amines, gave the membranes high adsorption capacities for the metal ions Au (III), Co (II), and Fe (III), as well as the cationic organic dye methylene blue (MB). Furthermore, the membranes served as excellent metal-free catalysts for the decolorization of dyes via hydrogenation. A 3-fold increase of the hydrogenation efficiency for cationic dyes such as rhodamine B (RhB) and methylene blue was obtained in the presence of membranes compared to NaBH₄ alone. Water-based processing, the abundance of the component materials, and the multifunctional characteristics of the membranes ensure their potential as excellent candidates for water purification systems.