Characterization of littered face masks in the southeastern part of Turkey

Face mask littering in coastal environment of Coromandel beaches, a comparison between street and beach littering - perspective and perceptions

The usage of face mask has been encouraged globally to combat the COVID-19 pandemic. However, their improper disposal has begun to impact the environment. In the present study, face mask littering was assessed in sixteen stations across the beaches in Coromandel coast of South India for a period of four weeks. Moreover, an online questionnaire was recorded to evaluate the people's perception about face mask usage and littering. In terms of land use pattern, stations with both fishing and tourism activities had higher abundance of face mask littering when compared with exclusive fishing and tourism stations. The study also found that mask littering was higher in streets when compared to the beaches. Of 163 respondents, most of the respondents preferred using disposable single use masks and 39.9% of the respondents preferred to dispose of the face masks along with other wastes. The study highlights the lack of proper solid waste management, negligent littering, and the need for raising awareness, strategic intervention to control this menace.

An investigation into the aging mechanism of disposable face masks and the interaction between different influencing factors

In the natural environment, a symphony of environmental factors including sunlight exposure, current fluctuations, sodium chloride concentrations, and sediment dynamics intertwine, potentially magnifying the impacts on the aging process of disposable face masks (DFMs), thus escalating environmental risks. Employing Regular Two-Level Factorial Design, the study scrutinized interactive impacts of ultraviolet radiation, sand abrasion, acetic acid exposure, sodium chloride levels, and mechanical agitation on mask aging. Aging mechanisms and environmental risks linked with DFMs were elucidated through two-dimensional correlation analyses and risk index method. Following a simulated aging duration of three months, a single mask exhibited the propensity to release a substantial quantity of microplastics, ranging from 38,800 ± 360 to 938,400 ± 529 particles, and heavy metals, with concentrations from 0.06 ± 0.02 μg/g (Pb) to 29.01 ± 1.83 μg/g (Zn). Besides, specific contaminants such as zinc ions (24.24 μg/g), chromium (VI) (4.20 μg/g), thallium (I) (0.92 μg/g), tetracycline (0.51 μg/g), and acenaphthene (1.73 μg/g) can be adsorbed significantly by aged masks. The study elucidates pivotal role of interactions between ultraviolet radiation and acetic acid exposure in exacerbating the environmental risks associated with masks, while emphasizing the pronounced influence of many other interactions. The research provides a comprehensive understanding of the intricate aging processes and ensuing environmental risks posed by DFMs, offering valuable insights essential for developing sustainable management strategies in aquatic ecosystems.

Global daily mask use estimation in the pandemic and its post environmental health risks: Analysis based on a validated dynamic mathematical model

The outbreak of the COVID-19 pandemic led to a sharp increase in disposable surgical mask usage. Discarded masks can release microplastic and cause environmental pollution. Since masks have become a daily necessity for protection against virus infections, it is necessary to review the usage and disposal of masks during the pandemic for future management. In this study, we constructed a dynamic model by introducing related parameters to estimate daily mask usage in 214 countries from January 22, 2020 to July 31, 2022. And we validated the accuracy of our model by establishing a dataset based on published survey data. Our results show that the cumulative mask usage has reached 800 billion worldwide, and the microplastics released from discarded masks due to mismanagement account for 3.27% of global marine microplastic emissions in this period. Furthermore, we illustrated the response relationship between mask usage and the infection rates. We found a marginally significant negative correlation existing between the mean daily per capita mask usage and the rate of cumulative confirmed cases within the range of 25% to 50%. This indicates that if the rate reaches the specified threshold, the preventive effect of masks may become evident.

Oxidative stress, biofilm-formation and activity responses of P. aeruginosa to microplastic-treated sediments: Effect of temperature and sediment type

Climate change and plastic pollution are the big environmental problems that the environment and humanity have faced in the past and will face in many decades to come. Sediments are affected by many pollutants and conditions, and the behaviors of microorganisms in environment may be influenced due to changes in sediments. Therefore, the current study aimed to explore the differential effects of various microplastics and temperature on different sediments through the metabolic and oxidative responses of gram-negative Pseudomonas aeruginosa. The sediments collected from various fields including beaches, deep-sea discharge, and marine industrial areas. Each sediment was extracted and then treated with various microplastics under different temperature (-18, +4, +20 and 35 °C) for seven days. Then microplastics were removed from the suspension and microplastic-exposed sediment samples were incubated with Pseudomonas aeruginosa to test bacterial activity, biofilm, and oxidative characteristics. The results showed that both the activity and the biofilm formation of Pseudomonas aeruginosa increased with the temperature of microplastic treatment in the experimental setups at the rates between an average of 2-39 % and 5-27 %, respectively. The highest levels of bacterial activity and biofilm formation were mainly observed in the beach area (average rate +25 %) and marine industrial (average rate +19 %) sediments with microplastic contamination, respectively. Moreover, oxidative characteristics significantly linked the bacterial activities and biofilm formation. The oxidative indicators of Pseudomonas aeruginosa showed that catalase and glutathione reductase were more influenced by microplastic contamination of various sediments than superoxide dismutase activities. For instance, catalase and glutathione reductase activities were changed between -37 and +169 % and +137 to +144 %, respectively; however, the superoxide dismutase increased at a rate between +1 and + 21 %. This study confirmed that global warming as a consequence of climate change might influence the effect of microplastic on sediments regarding bacterial biochemical responses and oxidation characteristics.

Culture dependent analysis of bacterial activity, biofilm-formation and oxidative stress of seawater with the contamination of microplastics under climate change consideration

Temperature changes due to climate change and microplastic contamination are worldwide concerns, creating various problems in the marine environment. Therefore, this study was carried out to discover the impact of different temperatures of seawater exposed to different types of plastic materials on culture dependent bacterial responses and oxidative characteristics. Seawater was exposed to microplastics obtained from various plastic materials at different temperature (-18, +4, +20, and +35 °C) for seven days. Then microplastics were removed from the suspension and microplastic-exposed seawater samples were analyzed for bacterial activity, biofilm formation and oxidative characteristics (antioxidant, catalase, glutathione, and superoxide dismutase) using Gram-negative Pseudomonas aeruginosa and Gram-positive Staphylococcus aureus. The results showed that the activity and biofilm formation of Pseudomonas aeruginosa and Staphylococcus aureus were affected through oxidative stress by catalase, glutathione, and superoxide dismutase due to the microplastic deformation by temperature changes. This study confirms that temperature changes as a result of climate change might influence microplastic degradation and their contamination impact in seawater in terms of bacterial metabolic and oxidation reactions.

Facemasks: An insight into their abundance in wetlands, degradation, and potential ecotoxicity

Disposable facemasks represent a new form of environmental contamination worldwide. This study aimed at addressing the abundance of facemasks in an overlooked natural environment with high ecological and economic value - the wetlands (Ria de Aveiro, Portugal, as study case), evaluating their potential biodegradation using naturally occurring fungi and assessing the potential ecotoxicity of released microfibres on local bivalves. All masks collected within 6500 m2 area of Aveiro wetland were 100 % disposable ones (PP-based, confirmed by Fourier transform infrared spectroscopy - FTIR) with an initial abundance of 0.0023 items/m2 in Sept. 2021, which was reduced by ∼40 % in Apr. 2022 and ∼87 % in Sept. 2022, as a reflection of the government policies. Analysis of the carbonyl index (0.03 to 1.79) underlined their state of degradation, primarily due to sun exposure during low tides. In laboratory conditions, 1 mm2 microplastics obtained from new disposable facemasks were prone to biodegradation by Penicillium brevicompactum and Zalerion maritimum inferred from microplastics mass loss (∼22 to -26 % and ∼40 to 50 %, respectively) and FTIR spectra (particularly in the hydroxyl and carbonyl groups). In addition, microfibres released from facemasks induced sublethal effects on the clam, Venerupis corrugata, mostly in their UV-aged form when compared to pristine ones, characterised by a decrease in cellular energy allocation (CEA) and an increase in aerobic energy metabolism (ETS). Concomitantly, clams exposed to 1250 items/L of UV-aged microplastics (similar to field-reported concentrations) expressed greater clearance capacity, indicating a need to compensate for the potential energy unbalance. This study provides the first baseline monitoring of facemasks in wetlands while bringing new evidence on their biodegradation and ecotoxicity, considering environmentally relevant conditions and keystone organisms in such environments. Such studies require scientific attention for rapid regulatory action against this emerging and persistent pollutant, also targeting remediation and mitigation strategies considering these items under pandemic scenarios.

Personal protective equipment (PPE) litter in terrestrial urban areas of Iligan City, Philippines

In recent years, many countries have relied on the massive use of personal protective equipment (PPE) following the recommendation of the World Health Organization (WHO) to combat COVID-19, an infectious disease caused by the SARS-CoV-2 virus. These PPEs include facemasks, face shields, disinfectant wipes, and disposable gloves. While PPE serves as protection, it can also be a source of pollution. This study is the first to establish a baseline monitoring and assessment of the spatial distribution of COVID-19-related PPE litter approaching the post-pandemic from the urban areas in Iligan City, Philippines. A total of 1632 COVID-19 PPE litter were gathered in all surveyed locations, predominantly facemasks (90.7%) and disinfectant wipes (8.8%). Among the surveyed areas, the location that recorded the highest count and density of PPE litter is in a residential zone (52.14%; n = 851; 0.0317 item m-2); the lowest was determined in recreational parks (2.57%; n = 42; 0.0016 item m-2). The significant difference in the total count of PPE items in each location could be traced to the varying land uses and ecosystems as well as the human behavior and activities. FTIR results reveal that all types of facemasks sampled are principally made of polypropylene, a material that threatens environmental sustainability and low recyclability. As the country is embracing the new normal and somewhat returning to pre-pandemic activities, this study calls for the prioritization of the government agendas on ecological solid waste management in the country.

Investigation of two different size microplastic degradation ability of thermophilic bacteria using polyethylene polymers

There are several studies stating that many types of microplastics cannot be retained completely by conventional wastewater treatment systems. Therefore, it is necessary to prevent the discharge of these microplastics to the ecological system. The objective of this study was to investigate the biodegradation ability of two different size of PE (50 and 150 µm) by using two Gram-positive, spore-forming, rod-shaped, and motile thermophilic bacteria, called strain Gecek4 and strain ST5, which can hydrolyse starch, were isolated from the soil's samples of Gecek and Ömer hot-springs in Afyonkarahisar, Turkey, respectively. Phenotypic features and 16S rRNA analyzing of strains also studied. According to these results, Gecek4s and ST5 were identified as Anoxybacillus flavithermus Gecek4s and Bacillus firmus ST5, respectively. Results showed that A. flavithermus Gecek4s could colonise the polymer surface and cause surface damage whereas B. firmus ST5 could not degrade bigger-sized particles efficiently. In addition, morphological changes on microplastic surface were investigated by scanning electron microscopy (SEM) where dimensional changes, irregularities, crack, and/or holes were detected. This finding suggests that there is a high potential to develop an effective integrated method for plastic bags degradation by extracellular enzymes from bacteria.

Face masks: a COVID-19 protector or environmental contaminant?

Face masks, a prime component of personal protective equipment (PPE) items, have become an integral part of human beings to survive under the ongoing COVID-19 pandemic situation. The global population requires an estimated 130 billion face masks and 64 billion gloves/month, while the COVID-19 pandemic has led to the daily disposal of approximately 3.5 billion single-use face masks, resulting in a staggering 14,245,230.63 kg of face mask waste. The improper disposal of face mask wastes followed by its mismanagement is a challenge to the scientists as the wastes create pollution leading to environmental degradation, especially plastic pollution (macro/meso/micro/nano). Each year, an estimated 0.15-0.39 million tons of COVID-19 face mask waste, along with 173,000 microfibers released daily from discarded surgical masks, could enter the marine environment, while used masks have a significantly higher microplastic release capacity (1246.62 ± 403.50 particles/piece) compared to new masks (183.00 ± 78.42 particles/piece). Surgical face masks emit around 59 g CO2-eq greenhouse gas emissions per single use, cloth face masks emit approximately 60 g CO2-eq/single mask, and inhaling or ingesting microplastics (MPs) caused adverse health problems including chronic inflammation, granulomas or fibrosis, DNA damage, cellular damage, oxidative stress, and cytokine secretion. The present review critically addresses the role of face masks in reducing COVID-19 infections, their distribution pattern in diverse environments, the volume of waste produced, degradation in the natural environment, and adverse impacts on different environmental segments, and proposes sustainable remediation options to tackle environmental challenges posed by disposable COVID-19 face masks.

Personal protective equipment-derived pollution during Covid-19 era: A critical review of ecotoxicology impacts, intervention strategies, and future challenges

During the COVID-19 pandemic, people used personal protective equipment (PPE) to lessen the spread of the virus. The release of microplastics (MPs) from discarded PPE is a new threat to the long-term health of the environment and poses challenges that are not yet clear. PPE-derived MPs have been found in multi-environmental compartments, e.g., water, sediments, air, and soil across the Bay of Bengal (BoB). As COVID-19 spreads, healthcare facilities use more plastic PPE, polluting aquatic ecosystems. Excessive PPE use releases MPs into the ecosystem, which aquatic organisms ingest, distressing the food chain and possibly causing ongoing health problems in humans. Thus, post-COVID-19 sustainability depends on proper intervention strategies for PPE waste, which have received scholarly interest. Although many studies have investigated PPE-induced MPs pollution in the BoB countries (e.g., India, Bangladesh, Sri Lanka, and Myanmar), the ecotoxicity impacts, intervention strategies, and future challenges of PPE-derived waste have largely gone unnoticed. Our study presents a critical literature review covering the ecotoxicity impacts, intervention strategies, and future challenges across the BoB countries (e.g., India (162,034.45 tons), Bangladesh (67,996 tons), Sri Lanka (35,707.95 tons), and Myanmar (22,593.5 tons). The ecotoxicity impacts of PPE-derived MPs on human health and other environmental compartments are critically addressed. The review's findings infer a gap in the 5R (Reduce, Reuse, Recycle, Redesign, and Restructure) Strategy's implementation in the BoB coastal regions, hindering the achievement of UN SDG-12. Despite widespread research advancements in the BoB, many questions about PPE-derived MPs pollution from the perspective of the COVID-19 era still need to be answered. In response to the post-COVID-19 environmental remediation concerns, this study highlights the present research gaps and suggests new research directions considering the current MPs' research advancements on COVID-related PPE waste. Finally, the review suggests a framework for proper intervention strategies for reducing and monitoring PPE-derived MPs pollution in the BoB countries.

Long-term release kinetic characteristics of microplastic from commonly used masks into water under simulated natural environments

Masks-related microplastic pollution poses a new threat to the environment and human health that has gained increasing concern. However, the long-term release kinetics of microplastic from masks in aquatic environments have yet to studied, which hampers its risk assessment. Four types of masks, namely cotton mask, fashion mask, N95 mask, and disposable surgical mask were exposed to systematically simulated natural water environments to determine the time-dependent microplastic release characteristics at 3, 6, 9, and 12 months, respectively. In addition, the structure changes of employed masks were examined by scanning electron microscopy. Moreover, Fourier transform infrared spectroscopy was applied to analyze the chemical composition and groups of released microplastic fibers. Our results showed that the simulated natural water environment could degrade four types of masks and continuously produce microplastic fibers/fragments in a time-dependent manner. The dominant size of released particles/fibers was below 20 μm across four types of face masks. The physical structure of all four masks was damaged to varying degrees concomitant with photo-oxidation reaction. Collectively, we characterized the long-term release kinetics of microplastic from four types of commonly used masks under a well-mimic real word water environment. Our findings suggest that urgent action must be taken to properly manage disposable masks and ultimately limit the health threats associated with discarded masks.

Different weathering conditions affect the release of microplastics by masks

A generation of microplastics caused by improper disposal of disposable masks has become a non-negligible environmental concern. In order to investigate the degradation mechanisms of masks and the release of microplastics under different environmental conditions, the masks are placed in 4 common environments. After 30 days of weathering, the total amount and release kinetics of microplastics released from different layers of the mask were studied. The chemical and mechanical properties of the mask were also discussed. The results showed that the mask released 25141±3543 particles/mask into the soil, which is much more than the sea and river water. The release kinetics of microplastics fit the Elovich model better. All samples correspond to the release rate of microplastics from fast to slow. Experiments show that the middle layer of the mask is released more than the other layers, and the amount of release was highest in the soil. And the tensile capacity of the mask is negatively correlated with its ability to release microplastics in the following order, which are soil > seawater > river > air > new masks. In addition, during the weathering process, the C-C/C-H bond of the mask was broken.

Determinants of proper disposal of single-use masks: knowledge, perception, behavior, and intervention measures

Background

Although many studies testify to consumer behavior's role in the context of waste-related sustainability objectives, little research examined what people know, think, and feel about the environmental impacts of their personal protective equipment (PPE) or their behavior towards them, in general. Therefore, the present article complements existing information about the public perceptions, knowledge, and behavior of single-use masks in a context where the pandemic has put increasing pressure on waste management public services. From February to June 2020, municipal solid waste increased ten times in Romania. The study identified the factors that predicted the proper disposal of single-use masks and the measures preferred to prevent or minimize the negative impact of single-use mask waste.

Method

Data from a representative sample of 705 Romanians were collected using a structured questionnaire. The data were analyzed with SPSS and SmartPLS. The Cochran's Q test was run to determine the existence of differences between percentages of people who preferred various measures. Dunn's test with a Bonferroni correction was used to identify the exact pair of groups where the differences were located. The study utilized structural equation models (SEM) based on at least partial squares with SmartPLS software (3.2.8) to investigate causal links between constructs. The model considered that the dependent variable (environmentally friendly behavior: proper disposal of single-use masks) could be influenced by the knowledge, perception, behavior, and demographics variables.

Results

The findings indicated that knowledge of the type of material of single-use masks had a direct positive (β = 0.173) and significant effect on their proper disposal. The perception of mask waste impact has a negative and significant (β = -0.153, p < 0.001) impact on the proper disposal of single-use masks. This path coefficient illustrates that the worse the perceived impact of single-use masks on waste management activity, the higher the proper disposal of single-use masks. Gender has a positive (β = 0.115) and significant (p < 0.001) effect on the proper disposal of single-use masks.

Conclusions

It was concluded that the 5Rs waste management approach should be reconsidered for single-use mask waste. For example, "Reuse" and the classic "Recycle" have limited applications since they may lead to virus transmission and possible infection. "Reducing" the use of single-use masks could have repercussions on one's health. Summing up, the study outlined recommendations for effective interventions for the proper disposal of single-use masks from the perspective of behavioral studies.

Recycling of disposable single-use face masks to mitigate microfiber pollution

The effectiveness of disposable masks in mitigating the transmission of COVID-19 infection increased the consumption of masks. The cheaper cost and easy accessibility resulted in massive consumption and disposal of non-woven masks. The improper disposal of mask emits microfiber into the environment upon weathering. This research mechanically recycled the disposed-of masks and developed fabric from reclaimed polypropylene (rPP) fibers. Obtained rPP fibers were blended with cotton in different proportions (50/50, 60/40, 70/30 cotton/rPP) to produce rotor-spun yarns and evaluated for their performance. The results of the analysis revealed that the developed blended yarns have enough strength; however, they are inferior to the 100% virgin cotton yarns. Based on its suitability, knitted fabrics were developed from 60/40 cotton/rPP yarn. Along with the physical properties, the microfiber release behavior of the developed fabric was analyzed at its different phases of the lifecycle (wearing, washing, degradation at disposal). The microfiber release was compared with the release characteristics of disposable masks. The results showed that recycled fabrics could release 2.32 microfiber/sq. cm during wearing, 4.91 microfiber/sq. cm in laundry, and 15.50 microfiber/sq. cm at the end-of-life disposal by weathering. In contrast, the mask can release 79.43, 96.07, and 223.66 microfiber/sq. cm, respectively, for use, immediate disposal, and long-term disposal by weathering. Approximately, an 83.17% reduction in the microfiber release was reported when the masks were recycled into fabrics. The compact structure of fabric where the fibers are made into yarn resulted in lesser fiber release. Mechanical recycling of disposable masks is simple, less energy-intensive, less expensive, and can be quickly adopted. However, a 100% elimination of microfiber release was not possible in this method due to the inherent nature of the textiles.

Current knowledge on the presence, biodegradation, and toxicity of discarded face masks in the environment

During the first year of the COVID-19 pandemic, facemasks became mandatory, with a great preference for disposable ones. However, the benefits of face masks for health safety are counteracted by the environmental burden related to their improper disposal. An unprecedented influx of disposable face masks entering the environment has been reported in the last two years of the pandemic, along with their implications in natural environments in terms of their biodegradability, released contaminants and ecotoxicological effects. This critical review addresses several aspects of the current literature regarding the (bio)degradation and (eco)toxicity of face masks related contaminants, identifying uncertainties and research needs that should be addressed in future studies. While it is indisputable that face mask contamination contributes to the already alarming plastic pollution, we are still far from determining its real environmental and ecotoxicological contribution to the issue. The paucity of studies on biodegradation and ecotoxicity of face masks and related contaminants, and the uncertainties and uncontrolled variables involved during experimental procedures, are compromising eventual comparison with conventional plastic debris. Studies on the abundance and composition of face mask-released contaminants (microplastics/fibres/ chemical compounds) under pre- and post-pandemic conditions should, therefore, be encouraged, along with (bio)degradation and ecotoxicity tests considering environmentally relevant settings. To achieve this, methodological strategies should be developed to overcome technical difficulties to quantify and characterise the smallest MPs and fibres, adsorbents, and leachates to increase the environmental relevancy of the experimental conditions.

Mechanism and characterization of microplastic aging process: A review

With the increasing production of petroleum-based plastics, the problem of environmental pollution caused by plastics has aroused widespread concern. Microplastics, which are formed by the fragmentation of macro plastics, are bio-accumulate easily due to their small size and slow degradation under natural conditions. The aging of plastics is an inevitable process for their degradation and enhancement of adsorption performance toward pollutants due to a series of changes in their physiochemical properties, which significantly increase the toxicity and harm of plastics. Therefore, studies should focus on the aging process of microplastics through reasonable characterization methods to promote the aging process and prevent white pollution. This review summarizes the latest progress in natural aging process and characterization methods to determine the natural aging mechanism of microplastics. In addition, recent advances in the artificial aging of microplastic pollutants are reviewed. The degradation status and by-products of biodegradable plastics in the natural environment and whether they can truly solve the plastic pollution problem have been discussed. Findings from the literature pointed out that the aging process of microplastics lacks professional and exclusive characterization methods, which include qualitative and quantitative analyses. To lessen the toxicity of microplastics in the environment, future research directions have been suggested based on existing problems in the current research. This review could provide a systematic reference for in-depth exploration of the aging mechanism and behavior of microplastics in natural and artificial systems.

An investigation into the aging of disposable face masks in landfill leachate

Due to the excessive use of disposable face masks during the COVID-19 pandemic, their accumulation has posed a great threat to the environment. In this study, we explored the fate of masks after being disposed in landfill. We simulated the possible process that masks would experience, including the exposure to sunlight before being covered and the contact with landfill leachate. After exposure to UV radiation, all three mask layers exhibited abrasions and fractures on the surface and became unstable with the increased UV radiation duration showed aging process. The alterations in chemical groups of masks as well as the lower mechanical strength of masks after UV weathering were detected to prove the happened aging process. Then it was found that the aging of masks in landfill leachate was further accelerated compared to these processes occurring in deionized water. Furthermore, the carbonyl index and isotacticity of the mask samples after aging for 30 days in leachate were higher than those of pristine materials, especially for those endured longer UV radiation. Similarly, the weight and tensile strength of the aged masks were also found lower than the original samples. Masks were likely to release more microparticles and high concentration of metal elements into leachate than deionized water after UV radiation and aging. After being exposed to UV radiation for 48 h, the concentration of released particles in leachate was 39.45 μL/L after 1 day and then grew to 309.45 μL/L after 30 days of aging. Seven elements (Al, Cr, Cu, Zn, Cd, Sb and Pb) were detected in leachate and the concentration of this metal elements increased with the longer aging time. The findings of this study can advance our understanding of the fate of disposable masks in the landfill and develop the strategy to address this challenge in waste management.

Thermal degradation model of used surgical masks based on machine learning methodology

Background

The COVID-19 pandemic has leveraged facial masks to be one of the most effective measures to prevent the spread of the virus, which thereby has exponentially increased the usage of facial masks that lead to medical waste mismanagements which pose a serious threat to life. Thermal degradation or pyrolysis is an effective treatment method for the used facial mask wastes and this study aims to investigate the thermal degradation of the same.

Methods

Predicted the TGA experimental curves of the mask components using a Machine Learning model known as Artificial Neural Network (ANN).

Significant findings

Three different parts of the mask namely- ribbon, body, and corner were separated and used for the analysis. The thermal degradation behavior is studied using Thermogravimetric Analysis (TGA) and this is crucial for determining the reactivity of the individual mask components as they are subjected to a range of temperatures. Using the curves obtained from TGA, kinetic parameters such as Activation energy (E) and Pre-exponential factor (A) were estimated using the Coats-Redfern model-fitting method. Using the determined kinetic parameters, thermodynamic quantities such as a change in Enthalpy (ΔH), Entropy (ΔS), and Gibbs-Free energy (ΔG) were also calculated. Since TGA is a costly and time-consuming process, this study attempted to predict the TGA experimental curves of the mask components using a Machine Learning model known as Artificial Neural Network (ANN). The dataset obtained at a heating rate of 10°C/min was used to train the 3 different neural networks corresponding to the mask components and it showed an excellent agreement with experimental data (R² > 0.99). Through this study, a complex chemical process such as thermal degradation was modelled using Machine Learning based on available experimental parameters without delving into the intricacies and complexities of the process.

Carbon footprint assessment of face masks in the context of the COVID-19 pandemic: Based on different protective performance and applicable scenarios

Widespread concerns have been raised about the huge environmental burden caused by massive consumption of face masks in the context of the COVID-19 pandemic. However, most of the existing studies only focus on the environmental impact associated with the product itself regardless of the actual usage scenarios and protective performance of products, resulting in unrealistic conclusions and poor applicability. In this context, this study integrated the product performance into the existing carbon footprint assessment methodology, with focus on the current global concerns regarding climate change. Computational case studies were conducted for different mask products applicable to the scenarios of low-, medium- and high-risk levels. The results showed that reusable cotton masks and disposable medical masks suitable for low-risk settings have a total carbon footprint of 285.484 kgCO2-eq/FU and 128.926 kgCO2-eq/FU respectively, with a break-even point of environmental performance between them of 16.886, which implies that cotton masks will reverse the trend and become more environmentally friendly after 17 washes, emphasizing the importance of improving the washability of cotton masks. Additionally, the total carbon footprints of disposable surgical masks and KN95 respirators were 154.328 kg CO2-eq/FU and 641.249 kg CO2-eq/FU respectively, while disposable medical masks and disposable surgical masks were identified as alternatives with better environmental performance in terms of medium- and high-risk environments respectively. The whole-life-cycle oriented carbon footprint evaluation further indicated that the four masks have greater potential for carbon emission reduction in the raw material processing and production processes. The results obtained in this study can provide scientific guidance for manufacturers and consumers on the production and use of protective masks. Moreover, the proposed model can be applied to other personal protective equipment with similar properties, such as protective clothing, in the future.

Disposable face masks release micro particles to the aqueous environment after simulating sunlight aging: Microplastics or non-microplastics?

This study focuses on characterizing microplastics and non-microplastics released from surgical masks (SMs), N95 masks (N95), KN95 masks (KN95), and children's masks (CMs) after simulating sunlight aging. Based on micro-Raman spectrum analysis, it was found that the dominant particles released from masks were non-microplastics (66.76-98.85%). Unfortunately, CMs released the most microplastics, which is 8.92 times more than SMs. The predominant size range of microplastics was 30-500 µm, and the main polymer types were PP and PET. Compared with the whole SMs, the microplastic particles released from the cutting-SMs increased conspicuously, which is 12.15 times that of the whole SMs. The main components of non-microplastics include β-carotene, microcrystalline cellulose 102, and eight types of minerals. Furthermore, non-microplastics were mainly fibrous and fragmented in appearance, similar to the morphology of microplastics. After 15 days of UVA-aging, the fibers of the face layers had cracks to varying degrees. It was estimated that these four types of masks can release at least 31.5 trillion microplastics annually in China. Overall, this study demonstrated that the masks could release a large quantity of microplastics and non-microplastics to the environment after sunlight aging, deserving urgent attention in the future study.

Impact of coastal wastewater treatment plants on microplastic pollution in surface seawater and ecological risk assessment

This study aims to understand the influence of wastewater treatment plant discharge on the microplastic status in the surface seawater of Istanbul. For this purpose, for the first time, the distribution, composition, and ecological risk of microplastics at nine sampling stations on the southern coast of Istanbul, Marmara, were investigated at monthly intervals over a one-year period. The results showed that the microplastic abundance ranged from 0 to over 1000 particles per liter. Fibers were the dominant form at all stations. Microplastics 249-100 μm were the dominant size, and transparency was the color most found at all stations. Polyethylene and ethylene-vinyl acetate were the major types of microplastics, accounting for 50% overall. The pollution load index revealed that over 70% of sampling stations were at hazard level I. However, the hazardous index was categorized as level III with a value of 662.3 due to the presence of the most hazardous polymer named polyurethane. Further investigations into the risk assessment of MP can reveal crucial knowledge for understanding the microplastic cycle.

Isolation of Thermophilic Bacteria and Investigation of Their Microplastic Degradation Ability Using Polyethylene Polymers

Microplastics (MPs) pose potential public health challenges because of their widespread occurrences in all environmental compartments. While most studies have focused on the occurrence fate of microplastics in wastewater treatment systems, the biodegradation of microplastics in wastewater is generally little understood. Therefore, we used two Gram-positive and thermophilic bacteria, called strain ST3 and ST6, which were identified by morphological, biochemical, physiological, and molecular analyses, to assess the growth and biodegradation potential of two different sized (50 and 150 m) polyethylene particles. The degradation was monitored based on structural and surface morphological changes. According to 16S rRNA analyses, ST3 and ST6 were identified as Anoxybacillus flavithermus ST3 and Anoxybacillus sp. ST6, respectively. The occurrence of cracks, holes, and dimensional changes was detected by scanning electron microscopy. Moreover, critical characteristic absorption band formation and modifications were determined by Fourier transform infrared spectroscopy. In addition to these, it was found that Anoxybacillus flavithermus ST3 and Anoxybacillus sp. ST6 produced high level of alpha-Amylase. These results showed that thermophilic bacteria are capable of the biodegradation of microplastics and production of alpha-Amylase.

Release of phthalate esters (PAEs) and microplastics (MPs) from face masks and gloves during the COVID-19 pandemic

Marine pollution with personal protective equipment (PPE) has recently gained major attention. Multiple studies reported the release of microplastics (MPs) and chemical contaminants from face masks, the most used PPE type. However, not much is known concerning the release of phthalate esters (PAEs) in aquatic media, as well as the hazard posed by other types of PPE. In the present study, we investigated the release of MPs and PAEs from face masks and gloves recovered from the environment. The results indicated that both PPEs release MPs comparable to the literature, but higher concentrations were presented by face masks. In turn, the total concentration of six PAEs was higher in gloves than in face masks. The release of these contaminants is exacerbated over time. The present study allows researchers to understand the contribution of PPE to marine pollution while accounting for gloves, a generally overlooked source of contaminants.

Mitigation of microfibers release from disposable masks - An analysis of structural properties

The use of disposable face masks increased rapidly among the general public to control the COVID-19 spread. Eventually, it increased the disposal of masks and their associated impacts on environmental pollution. Hence, this study aims to analyze the impact of nonwoven fabric structural parameters and weathering on the microfiber release characteristics. Spunbond polypropylene nonwoven with four different weights and meltblown nonwoven with two different weights were used in this study to analyze microfiber release at dry, and wet conditions to simulate improper disposal in the environment. Exposure to sunlight significantly increases the microfiber release from 35 to 50% for spunbond fabric and 56-89% for meltblown fabric. Weathering in sunlight structurally affected the tensile properties of the polypropylene fibers due to photodegradation. The study showed that each mask can produce 1.5 × 102 and 3.45 × 101 mg of microfiber/mask respectively in dry and wet states. In the case of structural parameters, a higher GSM (grams per square meter), abrasion resistance, bursting strength, and thickness showed a positive correlation with microfiber release in both fabrics. Significantly a higher microfiber release was reported with meltblown fabric than the spunbond for a given GSM. The presence of finer fibers and more fibers per unit area in meltblown fabric was noted as the main cause. Nonwoven fabric GSM and the number of fibers in a specific area showed a higher influence on microfiber release. Based on the mask consumption reported in the literature, India alone can produce around 4.27 × 102 tons of microfibers/week as an average of dry and wet conditions. The study suggests that the proper selection of physical parameters can significantly reduce the microfiber fiber release at all stages.

Prospect of microplastic pollution control under the "New normal" concept beyond COVID-19 pandemic

Coronavirus disease (COVID-19) has led to increasing demand for single-use plastic which aggravates the already existing plastic waste problem. Not only does the demand for personal protective equipment (PPE) increase, but also people shift their preference to online shopping and food delivery to comply with administrative policies for COVID-19 pandemic control. The used PPEs, packaging materials, and food containers may not be handled or recycled properly after their disposal. As a result, the mismanaged plastic waste is discharged into the environment and it may pose even greater risks after breaking into smaller fragments, which was regarded as the source of secondary microplastics (MPs, < 5 mm) or nanoplastics (NPs, < 1 μm). The main objective of this manuscript is to provide a review of the studies related to microplastic release due to pandemic-associated plastic waste. This study summarizes the limited work published on the ecotoxicological/toxicological effect of MPs/NPs released from PPE on aquatic organisms, soil organisms, as well as humans. Given the current status of research on MPs from COVID-related plastic waste, the immediate research directions needed on this topic were discussed.

Uncontrolled Disposal of Used Masks Resulting in Release of Microplastics and Co-Pollutants into Environment

The global panic caused by COVID-19 has continued to increase people’s demand for masks. However, due to inadequate management and disposal practice, these masks have, unfortunately, entered the environment and release a large amount of microplastics (MPs), posing a serious threat to the environment and human health. Understanding the occurrence of mask waste in various environments, release of mask-origin MPs, and related environmental risk is essential to mask-waste management in current and future epidemic prevention and control. This paper focuses on the global distribution of mask waste, the potential release of waste-origin MPs, and the impact on the environment. Specifically, the physical and chemical properties of polypropylene (the most common plastic material in a mask), which show a high adsorption capacity for heavy metals and organic pollutants and play a role as a support for microbial growth, were extensively reported. In addition, several important issues that need to be resolved are raised, which offers a direction for future research. This review focuses on the essentiality of handling masks to avoid potential environmental issues.

Impact of waste of COVID-19 protective equipment on the environment, animals and human health: a review

During the Corona Virus Disease 2019 (COVID-19) pandemic, protective equipment, such as masks, gloves and shields, has become mandatory to prevent person-to-person transmission of coronavirus. However, the excessive use and abandoned protective equipment is aggravating the world's growing plastic problem. Moreover, above protective equipment can eventually break down into microplastics and enter the environment. Here we review the threat of protective equipment associated plastic and microplastic wastes to environments, animals and human health, and reveal the protective equipment associated microplastic cycle. The major points are the following:1) COVID-19 protective equipment is the emerging source of plastic and microplastic wastes in the environment. 2) protective equipment associated plastic and microplastic wastes are polluting aquatic, terrestrial, and atmospheric environments. 3) Discarded protective equipment can harm animals by entrapment, entanglement and ingestion, and derived microplastics can also cause adverse implications on animals and human health. 4) We also provide several recommendations and future research priority for the sustainable environment. Therefore, much importance should be attached to potential protective equipment associated plastic and microplastic pollution to protect the environment, animals and humans.

The case of "public congregation vs. COVID-19 PPE pollution": Evidence, lessons, and recommendations from the annual pilgrimage to the Catholic Holy Site in Mexico City, Mexico

Pollution from personal protective equipment (PPE), particularly face masks, has surfaced in the marine and terrestrial environments globally since the COVID-19 outbreak due to improper disposal practices and inadequate waste management, raising widespread alarm and attention. Our understanding of the prevalence and distribution of PPE in highly populated metropolitan areas is still emerging, and studies focusing specifically on developing countries in Latin America remain sparse. This study attempted to "kill two birds with one stone" by (1) addressing this knowledge gap by analyzing the degree of improper dispensing of PPE in Mexico City (Mexico) and (2) investigating the impact of massive public congregations on PPE contamination during the yearly pilgrimage to the Villa de Guadalupe on December 12th. Our survey findings revealed 731 PPE items within a 6-kilometer radius between December 5 and December 12, 2021, with daily densities ranging from 4.1 × 10^-3-13.9 × 10^-3 PPE items m^-2. Face masks were the most disposed type of PPE (94%), with gloves and face shields accounting for just 6% of the total. The PPE disposal more than doubled as the pilgrim day approached, with an estimated disposal rate ranging from 151.52 to 506.06 items day^-1, substantiating the surge in the disposal of used PPE to large public congregations that filled the surroundings during the pilgrimage. The observed average PPE density of 7.8 × 10^-3 items m^-2 was higher than in the metropolitan environments of Canada, Ghana, and Turkey. To our knowledge, this first study describes information showing the need to pay attention to the major impact of public events and mobility on COVID-19 PPE pollution, as well as emphasizes the necessity for adequate management facilities in improving PPE disposal.

Personal protective equipment (PPE) pollution driven by the COVID-19 pandemic along the shoreline of Lake Tana, Bahir Dar, Ethiopia

Personal protective equipment (PPE) pollution has become one of the most pending environmental challenges resulting from the pandemic. While various studies investigated PPE pollution in the marine environment, freshwater bodies have been largely overlooked. In the present study, PPE monitoring was carried out in the vicinity of Lake Tana, the largest lake in Ethiopia. PPE density, types, and chemical composition (FTIR spectroscopy) were reported. A total of 221 PPEs were identified with a density ranging from 1.22 × 10-5 PPE m-2 (control site S1) to 2.88× 10-4 PPE m-2 with a mean density of 1.54 × 10-4 ± 2.58 × 10-5 PPE m-2. Mismanaged PPE waste was found in all the sampling sites, mostly consisting of surgical face masks (93.7%). Statistical analyzes revealed significantly higher PPE densities in sites where several recreational, touristic, and commercial activities take place, thus, revealing the main sources of PPE pollution. Furthermore, polypropylene and polyester fabrics were identified as the main components of surgical and reusable cloth masks, respectively. Given the hazard that PPEs represent to aquatic biota (e.g., entanglement, ingestion) and their ability to release microplastics (MPs), it is necessary to implement sufficient solid waste management plans and infrastructure where lake activities take place. Additionally, local authorities must promote and ensure sustainable tourism in order to maintain the ecosystems in Lake Tana. Prospective research priorities regarding the colonization and degradation of PPE, as well as the release of toxic chemicals, were identified and discussed.

Disposable tri-layer masks and microfiber pollution - An experimental analysis on dry and wet state emission

The use of masks as a personal protective material is the new normal in the post-pandemic. The higher use of masks triggers immediate disposal of synthetic textile fibers leading to environmental pollution. This research is aimed to analyse the level of mask-related pollution and its impact on microfiber release. Microfiber emission characteristics of the tri-layer nonwoven mask (Polypropylene-based disposable mask) are analysed in the dry and wet stages. The individual layers of the mask and the entire mask are evaluated by subjecting them to static immersion and mechanical agitation against freshwater and seawater in the wet stage. The results of the study showed a higher microfiber shedding at dry state (14,031.97-177,601.58 fibers/mask) than the wet state (2557.65-22,525.89 fibers/mask). The increased fuzz formation in the dry state than the wet state is noted as the main reason. In the case of wet state, when the freshwater and seawater are compared, both in a static and agitated state, seawater degraded the mask highly (3358.03-27,348.9 fibers/mask) than the freshwater (1757.26-17,702.86 fibers/mask). Higher salinity and density of the seawater were noted as influencing parameters over the freshwater. When the results of naturally weathered masks are compared with the new mask, weathered masks released significantly (p < 0.05) higher amount of fibers at the evaluation stages. Similar to the new masks, the weathered masks also showed a higher amount of shedding in the dry state and presence of seawater. When the individual layers of the disposable masks were evaluated, at dry and wet states, all the layers showed a similar shedding (no significant difference between individual layers) in the case of a new mask. Whereas, after weathering, a significant amount of higher shedding (p < 0.05) is noted in the middle layer of the mask followed by the outer and inner layer. The difference in fiber composition is noted as the main reason for the strength difference of the nonwoven structure. Statistical analysis confirmed the significant impact of the natural weathering process and seawater on the microfiber shedding.

Life cycle environmental impacts of disposable medical masks

A massive increase in the use and production of masks worldwide has been seen in the current COVID-19 pandemic, which has contributed to reducing the transmission of the virus globally. This paper aims to evaluate the life cycle environmental impacts of disposable medical masks to identify the life cycle stages that cause the highest impact on the environment. A further goal is to estimate the total environmental impacts at the global level in 2020. The inventory data was constructed directly from the industry. The system boundary of the study is from cradle to grave comprising raw material extraction and processing, production, packaging, distribution, use, and disposal as well as transport and waste management along the supply chain. Eleven environmental impacts have been estimated. The results suggest that the global warming potential of a disposable medical mask is 0.02 g CO2-eq. for which the main contributor is the raw material supply (40.5%) followed by the packaging (30.0%) and production (15.5%). Sensitivity analysis was carried out to test the environmental impacts. In total, 52 billion disposable medical masks used worldwide consumes 22 TJ of energy in 2020. The global warming potential of disposable medical masks supplied in a year of the COVID-19 pandemic is 1.1 Mt CO2 eq. This paper assessed the hotspots in the medical mask. The findings of this study will be of interest to policymakers, global mask manufacturers, and users, allowing them to make more informed decisions about the medical mask industry.

Assessing face masks in the environment by means of the DPSIR framework

The use of face masks outside the health care facility dates back a century ago. However, face masks use noticeably soared due to the COVID-19 (Coronavirus disease 2019) pandemic. As a result, an unprecedented influx of discarded face masks is ending up in the environment. This review paper delves into face masks in the environment using the DPSIR (driving forces, pressures, states, impacts, and responses) framework to simplify and communicate the environmental indicators. Firstly, the historical, and briefly the economic trajectory of face masks are discussed. Secondly, the main driving forces of face masks use with an emphasis on public health are explored. Then, the pressures exerted by efforts to fulfill the human needs (driving forces) are investigated. In turn, the state of the environment due to the influx of masks along with the impacts are examined. Furthermore, the upstream, and downstream societal responses to mitigate the environmental damages of the driving forces, pressures, states, and impacts are reviewed. In summary, it has been shown from this review that the COVID-19 pandemic has been causing a surge in face mask usage, which translates to face masks pollution in both terrestrial and aquatic environments. This implies proper usage and disposal of face masks is paramount to the quality of human health and the environment, respectively. Moreover, further research on eco-friendly face masks is indispensable to mitigating the environmental damages occurring due to the mass use of surgical masks worldwide.

Binational survey of personal protective equipment (PPE) pollution driven by the COVID-19 pandemic in coastal environments: Abundance, distribution, and analytical characterization

In the present contribution, two nationwide surveys of personal protective equipment (PPE) pollution were conducted in Peru and Argentina aiming to provide valuable information regarding the abundance and distribution of PPE in coastal sites. Additionally, PPE items were recovered from the environment and analyzed by Fourier transformed infrared (FTIR) spectroscopy, Scanning electron microscopy (SEM) with Energy dispersive X-ray (EDX), and X-ray diffraction (XRD), and compared to brand-new PPE in order to investigate the chemical and structural degradation of PPE in the environment. PPE density (PPE m^-2) found in both countries were comparable to previous studies. FTIR analysis revealed multiple polymer types comprising common PPE, mainly polypropylene, polyamide, polyethylene terephthalate, and polyester. SEM micrographs showed clear weathering signs, such as cracks, cavities, and rough surfaces in face masks and gloves. EDX elemental mapping revealed the presence of elemental additives, such as Ca in gloves and face masks and AgNPs as an antimicrobial agent. Other metals found on the surface of PPE were Mo, P, Ti, and Zn. XRD patterns displayed a notorious decrease in the crystallinity of polypropylene face masks, which could alter its interaction with external contaminants and stability. The next steps in this line of research were discussed.

Degradation of plastics associated with the COVID-19 pandemic

The ongoing COVID-19 pandemic has resulted in an unprecedented form of plastic pollution: personal protective equipment (PPE). Numerous studies have reported the occurrence of PPE in the marine environment. However, their degradation in the environment and consequences are poorly understood. Studies have reported that face masks, the most abundant type of PPE, are significant sources of microplastics due to their fibrous microstructure. The fibrous material (mostly consisting of polypropylene) exhibits physical changes in the environment, leading to its fracture and detachment of microfibers. Most studies have evaluated PPE degradation under controlled laboratory conditions. However, in situ degradation experiments, including the colonization of PPE, are largely lacking. Although ecotoxicological studies are largely lacking, the first attempts to understand the impact of MPs released from face masks showed various types of impacts, such as fertility and reproduction deficiencies in both aquatic and terrestrial organisms.

Recycling of Waste Facial Masks as a Construction Material, a Step towards Sustainability

Amid the COVID-19 pandemic, a sudden surge in the production and utilization of disposable, single-use facial masks has been observed. Delinquency in proper disposal of used facial masks endangers the environment with a new form of non-biodegradable plastic waste that will take hundreds of years to break down. Therefore, there is an urgent need for the resourceful recycling of such waste in an environmentally friendly way. This study presents an efficient solution by using waste masks in fibered or crushed form to produce environmentally friendly and affordable green concrete. This investigation assessed the mechanical and durability properties of waste masks-incorporated concrete. A total of six mixes were prepared for standardized tests to determine compressive strength, split cylinder tensile strength and rapid chloride penetration test (RCPT), and freeze-thaw resistance. The percentage of mask fibers used were 0.5, 1, 1.5, and 2% of concrete by volume, while crushed masks were used at 0.5% only. The mask waste in both forms was found suitable to be used in concrete. One percent of waste mask fibers was found as an optimum value to increase compressive and tensile strength, reduce chloride permeability, and increase freeze-thaw resistance. Besides this, 0.5% crushed mask fiber also performed well, especially for producing less permeable and highly durable concrete. It is thus corroborated that waste masks that increase pollution worldwide can be utilized sustainably to help build green buildings. By reutilizing waste masks to produce improved concrete with better strengths and higher durability, circular economy and sustainability are achieved, along with efficient waste management.

Investigating the current status of COVID-19 related plastics and their potential impact on human health

The COVID-19 pandemic led to a sudden global increase in the production, consumption, and mismanagement of personal protective equipment (PPE). As plastic-based PPE such as disposable face masks and gloves have become widely used, human exposure to PPE-derived pollutants may occur through indirect and direct pathways. This review explores the potential health impacts related to plastic-based PPE through these pathways. Face masks release microplastics, which are directly inhaled during use or transported through the environment. The latter can adsorb chemical contaminants and harbor pathogenic microbiota, and once consumed by organisms, they can translocate to multiple organs upon intake, potentially causing detrimental and cytotoxic effects. However, more research is required to have a comprehensive overview of the human health effects.

Review of the valorization options for the proper disposal of face masks during the COVID-19 pandemic

The COVID-19 pandemic has affected not only human health and economies but also the environment due to the large volume of waste in the form of discarded personal protective equipment. The remarkable increase in the global usage of face masks, which mainly contain polypropylene, and improper waste management have led to a serious environmental challenge called microplastic pollution. Potential practices for waste management related to waste valorization of discarded face masks as the major type of waste during the COVID-19 pandemic are explored in this study. Recommendations based on governmental practices, situation of state facilities, and societal awareness and engagement applicable to emergency (including COVID-19 pandemic) and postpandemic scenarios are offered while considering potential solutions and available waste management practices in different countries during emergency conditions. However, multicriteria decision making for a country must determine the optimal solution for waste management on the basis of all affecting factors. Awareness of scientific, governments, and communities worldwide will successfully eradicate this important environmental issue.