Degradation of synthetic dyes using nanoparticles: a mini-review

Nanotechnology in action: silver nanoparticles for improved eco-friendly remediation

Nanotechnology is an exciting area with great potential for use in biotechnology due to the far-reaching effects of nanoscale materials and their size-dependent characteristics. Silver and other metal nanoparticles have attracted a lot of attention lately because of the exceptional optical, electrical, and antimicrobial characteristics they possess. Silver nanoparticles (AgNPs) stand out due to their cost-effectiveness and abundant presence in the earth's crust, making them a compelling subject for further exploration. The vital efficacy of silver nanoparticles in addressing environmental concerns is emphasized in this thorough overview that dives into their significance in environmental remediation. Leveraging the distinctive properties of AgNPs, such as their antibacterial and catalytic characteristics, innovative solutions for efficient treatment of pollutants are being developed. The review critically examines the transformative potential of silver nanoparticles, exploring their various applications and promising achievements in enhancing environmental remediation techniques. As environmental defenders, this study advocates for intensified investigation and application of silver nanoparticles. Furthermore, this review aims to assist future investigators in developing more cost-effective and efficient innovations involving AgNPs carrying nanoprobes. These nanoprobes have the potential to detect numerous groups of contaminants simultaneously, with a low limit of detection (LOD) and reliable reproducibility. The goal is to utilize these innovations for environmental remediation purposes.

Hymenaea courbaril resin-mediated gold nanoparticles as catalysts in organic dyes degradation and sensors in pharmaceutical pollutants

In this study, green synthesis of gold nanoparticles (AuNPs) using aqueous extract from Hymenaea courbaril resin (HCR) is reported. The successful formation, functional group involvement, size, and morphology of the subject H. courbaril resin mediated gold nanoparticles (HCRAuNPs) were confirmed by Ultra Violet-Visible (UV-vis) spectroscopy, Fourier-Transform Infrared spectroscopy (FTIR), and Transmission Electron Microscopy (TEM) techniques. Stable and high yield of HCRAuNPs was formed in 1:15 (aqueous solution: salt solution) reacted in sunlight as indicated by the visual colour change and appearance of surface Plasmon resonance (SPR) at 560 nm. From the FT-IR results, the phenolic hydroxyl (-OH) functional group was found to be involved in synthesis and stabilization of nanoparticles. The TEM analysis showed that the particles are highly dispersed and spherical in shape with average size of 17.5 nm. The synthesized HCRAuNPs showed significant degradation potential against organic dyes, including methylene blue (MB, 85 %), methyl orange (MO, 90 %), congo red (CR, 83 %), and para nitrophenol (PNP, 76 %) up to 180 min. The nanoparticles also demonstrated the effective detection of pharmaceutical pollutants, including amoxicillin, levofloxacin, and azithromycin in aqueous environment as observable changes in color and UV-Vis spectral graph.

Potential of biosynthesized titanium dioxide nanoparticles towards wastewater treatment and antimicrobial activity

This study reports a green, sustainable, reliable, and cost-effective method for the biosynthesis of titanium dioxide nanoparticles (TiO2NPs) using the leaf and stem extracts of Carissa opaca. The newly synthesized biogenic TiO2NPs were confirmed and characterized using various analytical techniques, such as Fourier transform infrared spectroscopy (FTIR), high-resolution transmission electron microscopy (HRTEM), dynamic light scattering (DLS), zeta potential, X-ray diffraction (XRD), inductively coupled plasma analysis (ICP), and scanning electron microscopy (SEM). Both the electron microscopy, i.e., SEM and HRTEM confirmed the spherical/hexagonal crystalline structure of TiO2NPs with an average particle size range from 72.8 to 84.11 nm. These nanoparticles (NPs) exhibited aggregation and possessed a diverse array of functional groups on their surface. Biosynthesized TiO2NPs showed excellent photocatalytic activity against methylene blue (MB) with decolorizing efficiency of 87.8% and 91.95%, whereas in case of methyl violet (MV), the decolorizing efficiency of 82.1% and 71.9% was observed with nanoparticles synthesized using leaf and stem extract, respectively. The newly synthesized NPs have also shown good antibacterial potential against Klebsiella pneumoniae and Staphylococcus aureus. This new biomimetic approach offers an economical and environmentally benign alternative for the removal of hazardous dyes and may find a place for antimicrobial applications.

Biogenic Punica granatum Flower Extract Assisted ZnFe2O4 and ZnFe2O4-Cu Composites for Excellent Photocatalytic Degradation of RhB Dye

Globally, the textile industry contributes to pollution through accidental discharges or discharge of contaminated wastewater into waterways, significantly affecting water quality. These pollutants, including dye molecules, are environmental hazards for aquatic and terrestrial life. The field of visible light-mediated photocatalysis has experienced rapid growth, driven by the utilization of photocatalysts that can absorb low-energy visible light and effectively degrade dyes. In the present study, we report a simple method to controllably synthesize Fe2O3, ZnO, and ZnFe2O4 using the one-pot synthesis method. In the subsequent step, copper (Cu) was deposited on the surface of ZnFe2O4 (forming ZnFe2O4-Cu) using a facile, green, and cost-effective method. The synthesized samples were characterized using various techniques, including XRD, UV-Vis DRS, FT-IR, SEM-EDX, HR-TEM, XPS, PL, and BET analysis. These techniques were employed to investigate the composition, morphology, structure, and photophysical properties of as-prepared samples. The ZnFe2O4-Cu nanocomposite demonstrated efficient photocatalytic activity for degrading RhB dye pollutants under visible light. The photocatalyst was successfully reused for three consecutive cycles without significantly decreasing performance. Furthermore, during the study, the radical scavenging test emphasized the role of different radicals in the degradation of dye pollutants. This research has the potential to enable the efficient production of high-performance photocatalysts that can rapidly eliminate ecologically harmful dyes from aqueous solutions.

Xanthan gum-based copper nano-magnetite doped carbon aerogel: A promising candidate for environmentally friendly catalytic dye degradation

In this work, a novel copper nano-magnetite doped carbon aerogel (CXMCA) was created utilizing a simple graft co-polymerization approach with xanthan gum (XG) as a template to tackle the agglomeration problem caused by magnetic nanoparticle magnetism. The results indicated that the XG based CXMCA exhibited outstanding magnetic properties (Ms = 36.52 emu/g) as well as strong catalytic activity for the degradation of cationic and anionic dyes. Among all organic dyes, methylene blue and crystal violet (MB, CV) as cationic dyes, as well as congo red and methyl orange (CR, and MO) as anionic dyes, CXMCA demonstrated an exceptional dye degradation rate (8.06 × 10-3 s-1-1.12 × 10-2 s-1) and was highly competent for cationic dyes with degradation (90 %-98 %) as compared to its unsupported magnetic nanoparticles. The formation of CXMCA catalyst is clearly confirmed by the FTIR, XRD, XPS, VSM, SEM & TEM analyses. We report a very effective xanthan gum-based copper nano-magnetite doped carbon aerogel dye scavenger with application in percentage dye degradation and kinetic investigations, as well as a remarkable reusability assay up to 7 repetition cycles. The findings suggested that using biological macromolecules like xanthan gum as a foundation to generate magnetic aerogels might be a good choice for evaluating environmental aspects.

Green synthesis of nickel-doped magnesium ferrite nanoparticles via combustion for facile microwave-assisted optical and photocatalytic applications

NixMg1-xFe2O4(x = 0, 0.2, 0.4, 0.6) nanoparticles were symphonized via combustion with microwave assistance in the presence of Tamarindus indica seeds extract as fuel. Nanoparticles nature, size, morphology, oxidation state, elemental composition, and optical and luminescence properties were analysed using PXRD, FTIR, SEM, EDX, and HRTEM with SAED, XPS, UV-Visible and photoluminescence spectroscopy. PXRD analysis confirms that synthesized nanoparticles are spinel cubic and have a 17-18 nm average crystalline size. Tetrahedral and octahedral sites regarding stretching vibrations were confirmed by FTIR analysis. SEM and HRTEM data it is disclosed that the morphology of synthesized nanoparticles has nano flakes-like structure with sponge-like agglomeration. Elemental compositions of prepared nanoparticles were confirmed through EDX spectroscopy. XPS Spectroscopy confirmed and revealed transition, oxidation states, and elemental composition. The band gap and absorption phenomenon were disclosed using UV-visible spectroscopy, where the band gap declines (2.1, 2, 1.6, 1.8 eV), with increase in nickel NixMg1-xFe2O4(x = 0, 0.2, 0.4, 0.6) doping. Photoluminescence intensity reduces with an incline in nickel doping, was confirmed and disclosed using photoluminescence spectroscopy. Dyes (Methylene blue and Rhodamine B) degradation activity was performed in the presence of NDMF nanoparticles as a photocatalyst, which disclosed that 98.1% of MB dye and 97.9% of RB dye were degraded in 0-120 min. Regarding initial dye concentration and catalyst load, 5 ppm was initiated as the ideal initial concentration for both RB and MB dyes. 50 mg catalyst dosage was found to be most effective for the degradation of MB and RB dyes. In comparison, pH studies revealed that photodegradation efficiency was higher in neutral (MB-98.1%, RB-97.9%) and basic (MB-99.6%, RB-99.3%) conditions than in acidic (MB-61.8%, RB-60.4%) conditions.

Evaluation of synergistic approach of spinel cadmium-copper nanoferrites as magnetic catalysts for promoting wastewater decontamination: Impact of Ag ions doping

Metal substitution is an efficient strategy to improve the catalytic activity of ferrite-based catalysts. In this study, Cd0.5Cu0.5-xAgxFe2O4 (where 0 ≤ x ≤ 0.5) ferrites were fabricated via a simple co-precipitation method. The influence of the silver ions on the structural, magnetic, and catalytic characteristics of the spinel nanoparticles, as well as on their morphology, was examined. X-ray diffractograms revealed a crystalline cubic spinel structure with crystallite sizes in the nanoregime (7-15 nm). The saturation magnetization reduced from 29.8 to 2.80 emu as the Ag+ doping increased. Two prominent absorption bands were visible in Fourier-transform infrared spectra at 600 cm-1 and 400 cm-1, respectively, and they belonged to the tetrahedral (A) and octahedral (B) sites. The samples were then used as catalysts for the oxidative breakdown of the typical organic contaminant indigo carmine dye (IC). The catalytic process followed the first-order kinetic model, and the rate constant increased from 0.007 to 0.023 min-1 with increasing of Ag+ doping. Cd0.5Cu0.5-xAgxFe2O4 exhibited excellent catalytic performance in the pH range of 2-11, which means that they are promising efficient and stable materials for Fenton-based alkaline wastewater treatment. Finally, the pathway includes, HO•, HO2-•, and O2-• as oxidants resulted from the synergistic effects of Fe3+, Cu2+, and Ag+, with H2O2 and surface hydroxyl groups have been proposed.

Improvement of the optical, photocatalytic and antibacterial properties of ZnO semiconductor nanoparticles using different pepper aqueous extracts

Peppers are fruits that grow on plants of the genus Capsicum and are popular for their use in gastronomy as a condiment and for their anti-inflammatory and anti-cancer properties due to their phytocompounds such as flavonoids, polyphenols, or alkaloids. Semiconductor zinc oxide (ZnO) nanoparticles (NPs) were synthesized using a green approach employing natural aqueous extracts of several varieties of peppers (jalapeño, morita, and ghost). The obtained NPs were characterized by different techniques, and their photocatalytic and antibacterial activity was studied. The signal at 620 cm-1 in the FTIR spectra belonging to the Zn-O bond, the appearance of the main peaks of a hexagonal wurtzite structure in the XRD pattern, and the characteristic signals in the UV-Vis spectra confirm the correct formation of ZnO NPs. The photocatalytic activity was analyzed against Methylene Blue (MB), Rhodamine B (RB), and Methyl Orange (MO) under UV and sunlight. All syntheses were able to degrade more than 93% of the pollutants under UV light. Antibacterial assays were performed against gram-positive and gram-negative bacteria. All syntheses exhibited antibacterial activity against all bacteria and maximum growth inhibition against Bacillus subtilis. The prominent results demonstrate that natural aqueous extracts obtained from peppers can be used to synthesize ZnO NPs with photocatalytic and biomedical applications.

Synthesis and characterization of nanoparticles of cobalt and nickel ferrites for elimination of hazardous organic dyes from industrial wastewater

This study presents the results of synthesis and characterization of nanoparticles of cobalt ferrite (CoFe₂O₄) and nickel ferrite (NiFe₂O₄) using co-precipitation method followed by application for removal of hazardous organic textile dyes of thiazole yellow G (TYG) and alizarin yellow R (AYR). XRD analysis confirmed formation of cubic spinel structure with average crystallite sizes at 16.07 nm and 13.84 nm for CoFe₂O₄ and NiFe₂O₄, respectively. Field emission scanning electron microscopy (FESEM) analysis showed agglomeration of spherical shape morphology with uniformly distributed Co, Ni, Fe, and O elements. The surface area calculated from Brunauer-Emmett-Teller (BET) analysis was 64 m²/g and 62 m²/g for CoFe₂O₄ and NiFe₂O₄, respectively. Vibrating sample magnetometer (VSM) showed super-paramagnetic behavior for all samples with magnetic saturation (M_s) at 7.269 and 6.61 emu/g for CoFe₂O₄ and NiFe₂O₄, respectively. The adsorption influencing parameters such as pH of solution, quantity of adsorbent, and contact time on dye removal efficiency were thoroughly investigated. Overall, acidic condition of samples with pH at 4 favored the maximum removal efficiency by CoFe₂O₄ as 98, 97, and 93%, and by NiFe₂O₄ as 96, 93, and 92%, respectively, for TYG, AYR, and mixture sample. The Langmuir adsorption isotherm model describes the equilibrium of all samples with the best fit of coefficient of determination (R²). The adsorption results fitted well with a pseudo-second-order kinetic model for all samples. The regeneration-reuse ability of adsorbents and cost estimation analysis of the dye removal process suggested that the economic suitability of nano-adsorbents for remediation of textile effluents was favored. The estimated thermodynamic parameters inferred that the removal of organic dyes onto the surface of CoFe₂O₄ and NiFe₂O₄ is a spontaneous, favorable, and exothermic physical adsorption process.

Efficient Catalytic Degradation of Selected Toxic Dyes by Green Biosynthesized Silver Nanoparticles Using Aqueous Leaf Extract of Cestrum nocturnum L

In the present study, the catalytic degradation of selected toxic dyes (methylene blue, 4-nitrophenol, 4-nitroaniline, and congo red) using biosynthesized green silver nanoparticles (AgNPs) of Cestrum nocturnum L. was successfully performed. These AgNPs are efficiently synthesized when a reaction mixture containing 5 mL of aqueous extract (3%) and 100 mL of silver nitrate (1 mM) is exposed under sunlight for 5 min. The synthesis of AgNPs was confirmed based on the change in the color of the reaction mixture from pale yellow to dark brown, with maximum absorbance at 455 nm. Obtained NPs were characterized by different techniques, i.e., FTIR, XRD, HR-TEM, HR-SEM, SAED, XRD, EDX, AFM, and DLS. Green synthesized AgNPs were nearly mono-dispersed, smooth, spherical, and crystalline in nature. The average size of the maximum number of AgNPs was 77.28 ± 2.801 nm. The reduction of dyes using a good reducing agent (NaBH4) was tested. A fast catalytic degradation of dyes took place within a short period of time when AgNPs were added in the reaction mixture in the presence of NaBH4. As a final recommendation, Cestrum nocturnum aqueous leaf extract-mediated AgNPs could be effectively implemented for environmental rehabilitation because of their exceptional performance. This can be utilized in the treatment of industrial wastewater through the breakdown of hazardous dyes.

Photocatalytic and biological activities of green synthesized SnO2 nanoparticles using Chlorella vulgaris

AIMS

To produce tin oxide (SnO₂ ) nanoparticles (NP) with microalga for use in azo dye polluted wastewater treatment and to optimize the conditions to synthesize as small NPs as possible.

METHODS AND RESULTS

The green microalga Chlorella vulgaris mediated NPs were synthesized after an optimization process utilizing the statistical response surface methodology (RSM). The optimized synthesis conditions were 200 W microwave power, 0.5 mM SnCl₂ concentration, and 200 °C calcination temperature. Methyl orange (MO) was studied for its photocatalytic degradation with UV. Antibacterial activity against four pathogenic bacteria was studied using the well diffusion method. Cytotoxicity was measured using the MMT assay with lung cancer cell line A549, and antioxidant activity using DPPH radical scavenging. Following the optimization of their production, the produced crystalline SnO₂ NPs were on average 32.2 nm (by XRD) with a hydrodynamic size of 52.5 nm (by LDS). Photocatalytic degradation of MO under UV was nearly complete (94% removal) after 90 min and the particles could be reused for 5 cycles retaining 80% activity. The particles had antibacterial activity towards all five tested bacterial pathogens with the minimum inhibitory concentrations ranging from 22 to 36 μg/ml. The minimum bactericidal NP concentration varied between 83 and 136 μg/ml. Antioxidant activity was concentration dependent. A cytotoxicity was determined towards A549 cells with an LD50 of 188 μg/ml after 24 h of incubation, a concentration that is much higher than the active concentration for dye removal ranging from 22 to 36 μg/ml.

CONCLUSIONS

After optimization, SnO2 nanoparticles produced with C. vulgaris displayed high photocatalytic activity at concentrations below their antibacterial and cytotoxic activity.

SIGNIFICANCE AND IMPACT OF THE STUDY

The SnO₂ nanoparticles produced with the help of microalgae are suitable for the removal of MO dye from wastewater. Further applications of this green technology can be expected.