Efficient removal of antibiotics from water resources is a public health priority: a critical assessment of the efficacy of some remediation strategies for antibiotics in water

Neurotoxic and behavioral deficit in Drosophila melanogaster exposed to photocatalytic products of Paraquat

The Advanced Oxidative Processes have demonstrated potential for application in the degradation of organic pollutants, such as Paraquat (PQ) from water and wastewater, due to their low price, high efficiency, and non-toxic properties. In this study, we investigated whether the photodegradation of PQ with TiO2 nanotubes reduced its toxicity in Drosophila melanogaster. However, dietary ingestion of degradation products PQ for larvae resulted in a low axial ratio (pupal volume). In the adults, products of photodegradation of PQ exposure markedly diminished climbing ability in a time-dependent manner after 10 days of feeding. In addition, exposure of D. melanogaster to photodegradation of PQ reduced acetylcholinesterase and citrate synthase activities but improved oxidative stress, as evidenced by oxide nitric, protein carbonyl, and lactate production. These results suggest that the photodegradation of PQ with TiO2 nanotubes produced PQ fragments with higher toxicity than PQ, while the precise mechanism of its action needs further investigation.

Perspectives for Photocatalytic Decomposition of Environmental Pollutants on Photoactive Particles of Soil Minerals

The literature shows that both in laboratory and in industrial conditions, the photocatalytic oxidation method copes quite well with degradation of most environmental toxins and pathogenic microorganisms. However, the effective utilization of photocatalytic processes for environmental decontamination and disinfection requires significant technological advancement in both the area of semiconductor material synthesis and its application. Here, we focused on the presence and "photocatalytic capability" of photocatalysts among soil minerals and their potential contributions to the environmental decontamination in vitro and in vivo. Reactions caused by sunlight on the soil surface are involved in its normal redox activity, taking part also in the soil decontamination. However, their importance for decontamination in vivo cannot be overstated, due to the diversity of soils on the Earth, which is caused by the environmental conditions, such as climate, parent material, relief, vegetation, etc. The sunlight-induced reactions are just a part of complicated soil chemistry processes dependent on a plethora of environmental determinates. The multiplicity of affecting factors, which we tried to sketch from the perspective of chemists and environmental scientists, makes us rather skeptical about the effectiveness of the photocatalytic decontamination in vivo. On the other hand, there is a huge potential of the soils as the alternative and probably cheaper source of useful photocatalytic materials of unique properties. In our opinion, establishing collaboration between experts from different disciplines is the most crucial opportunity, as well as a challenge, for the advancement of photocatalysis.

A CuCo Bimetal Confined Hollow SiC Hybrid Photothermal Nanoreactor for the Integration of Pollutant Mineralization and Solar-Powered Water Evaporation

Growing attention has been paid to the rational treatment of antibiotics-bearing medical wastewater. However, the complexity of polluted wastewater makes the later comprehensive treatment difficult only by the Advanced Oxidation Process technique. Therefore, the coupled water treatment techniques including contaminant mineralization and regeneration of cleanwater become very attractive. A bimetallic functional hollow nanoreactor defined as (Co@SiO2/Cu-X) was successfully constructed by coating a Cu-doped silica layer on the metal-organic framework (ZIF-67) followed by programmed calcination in nitrogen. The nanoreactor was endowed with a hollow configuration composed of mesoporous N-doping C-Silica hybrid shell encapsulated ultrafine Cu and Co metallic species. Such a configuration allows for the efficient diffusion and open reaction space of big contaminant molecules. The catalytic synergy of exposed Co-Cu bimetals and the easy accessibility of electron-rich contaminants by polar N doping sites triggered surface affinity make the optimal Co@SiO2/Cu-6 afford an excellent catalytic norfloxacin mineralization activity (7 min, kabs=0.744 min-1) compared to Cu-free Co@SiO2-6 (kabs=0.493 min-1) and Co-6 (kabs=0.378 min-1) Benefiting from the above unique advantages, Co@SiO2/Cu-6 show excellent removal performance in degrading different pollutants (carbamazepine, oxytetracycline, tetracycline, and bisphenol A) and persistent recycled stability in removing NFX. In addition, by virtue of the excellent photothermal properties, interfacial solar water evaporation application by Co@SiO2/Cu-6 was further explored to reach the regeneration of cleanwater (1.595 kg m-2 h-1, 97.51 %). The integration of pollutant mineralization and solar water evaporation by creating the monolith evaporation by anchoring the Co@SiO2/Cu-6 onto the tailored melamine sponge allows the regeneration of cleanwater (1.6 kg⋅m-2⋅h-1) and synchronous pollutant removal (NFX, 95 %, 60 min), which provides potential possibility the treatment of complicated wastewater.

Fungal Bioremediation of the β-Lactam Antibiotic Ampicillin under Laccase-Induced Conditions

Due to widespread overuse, pharmaceutical compounds, such as antibiotics, are becoming increasingly prevalent in greater concentrations in aquatic ecosystems. In this study, we investigated the capacity of the white-rot fungus, Coriolopsis gallica (a high-laccase-producing fungus), to biodegrade ampicillin under different cultivation conditions. The biodegradation of the antibiotic was confirmed using high-performance liquid chromatography, and its antibacterial activity was evaluated using the bacterial growth inhibition agar well diffusion method, with Escherichia coli as an ampicillin-sensitive test strain. C. gallica successfully eliminated ampicillin (50 mg L-1) after 6 days of incubation in a liquid medium. The best results were achieved with a 9-day-old fungal culture, which treated a high concentration (500 mg L-1) of ampicillin within 3 days. This higher antibiotic removal rate was concomitant with the maximum laccase production in the culture supernatant. Meanwhile, four consecutive doses of 500 mg L-1 of ampicillin were removed by the same fungal culture within 24 days. After that, the fungus failed to remove the antibiotic. The measurement of the ligninolytic enzyme activity showed that C. gallica laccase might participate in the bioremediation of ampicillin.

A Review on Nanomaterial as Photocatalysts for Degradation of Organic Pollutants

Eliminating hazardous organic contaminants from water is a major concern today. Nanomaterials with their textural features, large surface area, electrical conductivity, and magnetic properties make them efficient for the removal and photocatalytic degradation of organic pollutants. The reaction mechanisms of the photocatalytic oxidation of common organic pollutants were critically examined. A detailed review of articles published on photocatalytic degradation of hydrocarbons, pesticides, and dyes was presented therein. This review seeks to bridge information gaps on the reported nanomaterial as photocatalysts for the degradation of organic pollutants under sub-headings, nanomaterials, organic pollutants, degradation of organic pollutants, and mechanisms of photocatalytic activities.

Enhanced photocatalytic degradation of levofloxacin over heterostructured C3N4/Nb2O5 system under visible light

The growing usage of antibiotics and their subsequent release in water bodies have become a serious environmental concern. In this study, heterostructured photocatalysts C3N4/Nb2O5 have been synthesized using a simple hydrothermal method and applied to facilitate the degradation of the widely used antibiotic levofloxacin. The structural, morphological, and optical properties of the photocatalysts were characterized using XRD, SEM, TEM, UV-Vis and PL to establish the structure-property relationship. The type-II heterojunctions C3N4/Nb2O5 show remarkable activity under visible light irradiation, where Nb2O5 facilitates preferential adsorption of levofloxacin at the catalyst surface while C3N4 extends visible light absorption. This synergy resulted in superior catalytic performance (91%) in the optimized system, exceeding that of individual materials (Nb2O5 30% and C3N4 56%). The effect of catalyst dosage, pH, oxygen and point of zero is also investigated. The process is mainly photo-driven, and the trapping experiments reveal superoxide radicals as key species responsible for the degradation. Additionally, the adsorption behaviour, reformation of the degraded pollutant and reusability factors are evaluated to assess the practical feasibility of the photocatalytic system.

Recent Advances in Carbon-Based Materials for Adsorptive and Photocatalytic Antibiotic Removal

Antibiotics have been a primary environmental concern due to their widespread dispersion, harmful bioaccumulation, and resistance to mineralization. Unfortunately, typical processes in wastewater treatment plants are insufficient for complete antibiotic removal, and their derivatives in effluent can pose a threat to human health and aquatic communities. Adsorption and photocatalysis are proven to be the most commonly used and promising tertiary treatment methods. Carbon-based materials, especially those based on graphene, carbon nanotube, biochar, and hierarchical porous carbon, have attracted much attention in antibiotic removal as green adsorbents and photocatalysts because of their availability, unique pore structures, and superior physicochemical properties. This review provides an overview of the characteristics of the four most commonly used carbonaceous materials and their applications in antibiotic removal via adsorption and photodegradation, and the preparation of carbonaceous materials and remediation properties regarding target contaminants are clarified. Meanwhile, the fundamental adsorption and photodegradation mechanisms and influencing factors are summarized. Finally, existing problems and future research needs are put forward. This work is expected to inspire subsequent research in carbon-based adsorbent and photocatalyst design, particularly for antibiotics removal.