A highly sensitive chemiluminescence sensor for detecting mercury (II) ions: a combination of Exonuclease III-aided signal amplification and graphene oxide-assisted background reduction

A signal-on fluorescent biosensor for mercury detection based on a cleavable phosphorothioate RNA fluorescent probe and metal-organic frameworks

Mercury contamination is a major environmental concern. In this work, we used a cleavable phosphorothioate (PS) fluorescence probe quenched by UiO-66-NH₂ to develop a "signal-on" fluorescent biosensor for Hg²⁺ detection. The probe was bound to UiO-66-NH₂ through π-π stacking and hydrogen bonding, thereby extinguishing the fluorescence of the FAM-labelled probe. The PS site was cleaved in the presence of Hg²⁺, releasing the FAM group and significantly enhancing the fluorescence signal. The intensity of the fluorescence linearly rose as the Hg²⁺ concentration increased in the range of 1-100 nM (R² = 0.994), and the limit of detection was 0.118 nM (S/N = 3). This biosensor demonstrated high selectivity for Hg²⁺ and was effectively applied to quantification of Hg²⁺ in various water samples with acceptable recovery rates. These results suggest that this practical, straightforward technology is a good option for monitoring mercury ions in the environment.

DNAzyme-based biosensors for mercury (Ⅱ) detection: Rational construction, advances and perspectives

Mercury contamination is one of the most severe issues in society due to its threats to public health and the ecological system. However, traditional methods for mercury ion detection are still limited by their time-consuming procedures, requirement of expensive instruments, and low selectivity. In recent decades, tremendous progress has been made in the development of functional nucleic acid-based, especially DNAzyme sensors for mercury (Ⅱ) (Hg²⁺) determination, including RNA-cleaving DNAzymes and G-quadruplex-based DNAzymes in particular. Researchers have heavily studied the construction of Hg²⁺ sensors, mainly originating from in vitro selection-derived DNAzymes, by incorporating T-Hg²⁺-T recognition moieties in existing DNAzyme scaffolds, and interfacing Hg²⁺-sensitive sequences with nanomaterials. In the last case, the employment of materials (as quenchers, signal transducers and DNA immobilizers) enriches the application scenarios of current Hg²⁺-DNAzymes, due to a combination of their functions. We summarize a broad range of sensing approaches, including optical, electrochemical, and other sensing methods, and compare their features. This review elaborates on the rational design strategies for engineering DNAzymes to selectively sense Hg²⁺, critically discusses their properties in different application scenarios, and summarizes recent advances in this field. Additionally, current progress, challenges and future perspectives are also discussed. This minireview provides deeper insights into the chemistry of these functional nucleic acids when working with Hg²⁺, explains the design ideas of DNAzyme-sensors in each platform, and reveals potential opportunities in developing more advanced DNAzyme sensors for the highly selective and sensitive recognition of Hg²⁺. ENVIRONMENTAL IMPLICATION: Mercury is one of the most toxic metallic contaminants due to its high toxicity, non-biodegradability, and serious human health risks when accumulated in the body. In the recent decade, intensive studies have focused on exploring mercury sensors by combining DNAzymes with various sensing methods, paving a promising avenue to gain ultra-high sensitivity and selectivity. However, so far, no review has introduced the recent advances on DNAzyme-based sensors for mercury detection in a critical way. In this review, we comprehensively summarized the studies on DNAzyme-based sensors for mercury detection using various sensing techniques including optical, electrochemical and other sensing methods.

Sol-Gel Synthesis and Characterization of Highly Selective Poly(N-methyl pyrrole) Stannous(II)Tungstate Nano Composite for Mercury (Hg(II)) Detection

The sol-gel process was used to create a new type of polypyrrole-Stannous(II)tungstate nanocomposite by poly(N-methyl pyrrole (PNMPy) sol in Stannous(II)tungstate gel, produced separately using sodium silicotungstic acid and Tn(II)chloride. Tin(II)tungstate (SnWO3) was made by changing the mixing volume ratios of SnWO3 and with a constant amount of an organic polymer. The composite was characterized by TGA, XRD, FTIR, and SEM measurements. A commercially available glassy carbon electrode (GCE) was modified with PNMPy/nano-Stannous(II)WO3 nanocomposites to create a chemical sensor for selective detection of Hg2+ ions using an effective electrochemical methodology. In the I-V technique, selectively toxic Hg2+ ion was targeted selectively, which shows a rapid reaction toward PNMPy/nano-Stannous(II)WO3/Nafion/GCE sensor. It also demonstrates long-term stability, an ultra-low detection limit, exceptional sensitivity, and excellent reproducibility and repeatability. For 0.1 mM to 1.0 nM aqueous Hg2+ ion solution, a linear calibration plot (r2: 0.9993) was achieved, with a suitable sensitivity value of 2.8241 AM−1 cm−2 and an extraordinarily low detection limit (LOD) of 3.40.1 pM (S/N = 3). As a result, the cationic sensor modified by PNMPy/nano-Stannous(II)WO3/GCE could be a promising electrode.

Fluorescence-Based Kinetic Measurements for RNA-Cleaving DNAzymes

Studying the catalytic behavior of biocatalysts under different conditions including temperature, buffer conditions, and cofactor concentrations is an important tool to understand their reaction mechanism. We describe two protocols that allow for the investigation of the catalysis of RNA-cleaving DNAzymes. The techniques include the use of FRET-labeled RNA substrates for studying the RNA-cleavage reaction in real-time under high throughput as well as RNA substrates labeled with a fluorescein molecule at the 5' end for gel-based assays. Both methods allow for an accurate determination of rate constants given a reaction model.

A highly sensitive electrochemical biosensor for microRNA122 detection based on a target-induced DNA nanostructure

Specific and sensitive biomarker detection is significant for the early diagnosis of cancers. Herein, a highly sensitive electrochemical biosensor employing a tetrahedral DNA nanostructure (TDN) probe and multiple signal amplification strategies has been constructed, and successfully applied to microRNA-122 (miR-122) detection. The platform consisted of a TDN probe anchoring on a gold nanoparticle-coated gold electrode and multiple signal amplification procedures combining the electrodeposition of gold nanoparticles, hybridization chain reaction (HCR), and horseradish peroxidase enzymatic catalysis (HPEC). In the presence of the target, the hairpin structure of the helper probe could be opened and trigger the HCR through the hybridization of H1 and H2 probes, and then avidin-HRP was attached on the surface of the gold electrode that can produce an electro-catalytic signal. We used TDN probe as the scaffold to increase the reactivity and multiple signal amplification greatly improve the sensitivity of this biosensor. This biosensor offers an excellent sensitivity (a limit of detection of 0.74 aM) and differentiation ability for single and multiple mismatches. This multiplexing biosensor for trace microRNA detection shows promising applications in the early diagnosis of cancer.

Graphene/aptamer probes for small molecule detection: from in vitro test to in situ imaging

Small molecules are key targets in molecular biology, environmental issues, medicine and food industry. However, small molecules are challenging to be detected due to the difficulty of their recognition, especially in complex samples, such as in situ in cells or animals. The emergence of graphene/aptamer probes offers an excellent opportunity for small molecule quantification owing to their appealing attributes such as high selectivity, sensitivity, and low cost, as well as the potential for probing small molecules in living cells or animals. This paper (with 130 refs.) will review the application of graphene/aptamer probes for small molecule detection. We present the recent progress in the design and development of graphene/aptamer probes enabling highly specific, sensitive and rapid detection of small molecules. Emphasis is placed on the success in their development and application for monitoring small molecules in living cells and in vivo systems. By discussing the key advances in this field, we wish to inspire more research work of the development of graphene/aptamer probes for both on-site or in situ detection of small molecules and its applications for investigating the functions of small molecules in cells in a dynamic way. Graphical abstract Graphene/aptamer probes can be used to construct different platforms for detecting small molecules with high specificity and sensitivity, both in vitro and in situ in living cells and animals.

Recent advances in two-dimensional-material-based sensing technology toward health and environmental monitoring applications

Monitoring harmful and toxic chemicals, gases, microorganisms, and radiation has been a challenge to the scientific community for the betterment of human health and environment. Two-dimensional (2D)-material-based sensors are highly efficient and compatible with modern fabrication technology, which yield data that can be proficiently used for health and environmental monitoring. Graphene and its oxides, black phosphorus (BP), transition metal dichalcogenides (TMDCs), metal oxides, and other 2D nanomaterials have demonstrated properties that have been alluring for the manufacture of highly sensitive sensors due to their unique material properties arising from their inherent structures. This review summarizes the properties of 2D nanomaterials that can provide a platform to develop high-performance sensors. In this review, we have also discussed the advances made in the field of infrared photodetectors and electrochemical sensors and how the structural properties of 2D nanomaterials affect sensitivity and performance. Further, this review highlights 2D-nanomaterial-based electrochemical sensors that can be used to check for contaminations from heavy metals, organic/inorganic compounds, poisonous gases, pesticides, bacteria, antibiotics, etc., in water or air, which are severe risks to human wellbeing as well as the environment. Moreover, the limitations, future prospects, and challenges for the development of sensors based on 2D materials are also discussed for future advancements.

Enzyme-free hybridization chain reaction-based signal amplification strategy for the sensitive detection of Staphylococcus aureus

In this study, based on hybridization chain reaction (HCR) amplification and graphene oxide (GO), we developed a facile enzyme-free signal amplification strategy for sensitive detection of Staphylococcus aureus (S. aureus). Two hairpin probes (HP₁ and HP₂) labeled by fluorophore 6-carboxyfluorescein (FAM) are designed. The HP₁ and HP₂ can not only trigger to the HCR but also form a long nicked double strand DNA (dsDNA) with the target (16S rRNA). In the absence of target (16 s RNA), the free FAM-labeled HP1 and HP2 are adsorbed by the GO via π-π stacking, the fluorescence signal is quenched. In the presence of target (16 s RNA), the HCR is triggered and dsDNA complexes are generated. As a result, the fluorescence signal can be strongly amplified by the synergistic effect of FAM and the dsDNA dye SYBR Green I. Based on this mechanism, a fluorescence method is designed for the detection of 16S rRNA of S. aureus. Under the optimal conditions, it has low detection limit (50 pM) and a linear response in a concentration range of 50 pM to 100 nM for 16S rRNA. Furthermore, this method has also been successfully applied to the detection of S. aureus in milk sample with the detection limit of 4 × 10² CFU·mL^-1.

Colorimetric and visual mercury(II) assay based on target-induced cyclic enzymatic amplification, thymine-Hg(II)-thymine interaction, and aggregation of gold nanoparticles

A colorimetric biosensor and visual test is described for the determination of mercury(II). It relies on the specific thymine-Hg(II)-thymine (T-Hg²⁺-T) interaction which induces a cyclic amplification process (caused by the enzyme exonuclease III) and the aggregation of gold nanoparticles. These results in a color change from red to violet. Under optimized conditions, this colorimetric assay (best performed at 524 nm) has a detection limit as low as 0.9 nM with a detection range over 4 orders of magnitude (from 1 nM to 10 μM). Graphical abstract Schematic of a colorimetric method for determination of mercury ions (Hg²⁺) based on the thymine-Hg²⁺-thymine interaction-triggered cyclic enzymatic amplification and aggregation of gold nanoparticles with the aid of exonuclease III (Exo III).

Electrochemical mercury biosensors based on advanced nanomaterials

This review presents an overview of the synthesis strategies and electrochemical performance of recently developed nanomaterials for the Hg²⁺ assay.

Advanced Selection Methodologies for DNAzymes in Sensing and Healthcare Applications

DNAzymes have been widely explored owing to their excellent catalytic activity in a broad range of applications, notably in sensing and biomedical devices. These newly discovered applications have built high hopes for designing novel catalytic DNAzymes. However, the selection of efficient DNAzymes is a challenging process but one that is of crucial importance. Initially, systemic evolution of ligands by exponential enrichment (SELEX) was a labor-intensive and time-consuming process, but recent advances have accelerated the automated generation of DNAzyme molecules. This review summarizes recent advances in SELEX that improve the affinity and specificity of DNAzymes. The thriving generation of new DNAzymes is expected to open the door to several healthcare applications. Therefore, a significant portion of this review is dedicated to various biological applications of DNAzymes, such as sensing, therapeutics, and nanodevices. In addition, discussion is further extended to the barriers encountered for the real-life application of these DNAzymes to provide a foundation for future research.

Chemiluminescence-based aptasensors for various target analytes

Aptamers (DNA or RNA) have complex three-dimensional shapes that can bind to specific targets. Relative to antibodies, aptamers benefit from their low cost of production, easy chemical modification, high chemical stability, reproducibility, and low levels of immunogenicity and toxicity. However, the true value of aptamers lies in their simplicity by which these molecules can be engineered into sensors as bio-recognition elements in diagnostics, drug discovery and therapy, environmental monitoring and food quality testing, etc. Many different types of techniques, such as optical, electrochemical, radiochemical and piezoelectronic methods, have been applied for the design of aptamer-based methods, in which chemiluminescence (CL) detection techniques have become very popular in recent years. This review focuses on the recent advances in the development of aptamer-based CL sensors for different target detection. We highlight specific examples that showcase the use of aptamers in practical applications, and provide the challenges and opportunities in this promising field.

Graphene-based nanomaterials in biosystems

Graphene-based nanomaterials have emerged as a novel type of materials with exceptional physicochemical properties and numerous applications in various areas. In this review, we summarize recent advances in studying interactions between graphene and biosystems. We first provide a brief introduction on graphene and its derivatives, and then discuss on the toxicology and biocompatibility of graphene, including the extracellular interactions between graphene and biomacromolecules, cellular studies of graphene, and in vivo toxicological effects. Next, we focus on various graphene-based practical applications in antibacterial materials, wound addressing, drug delivery, and water purification. We finally present perspectives on challenges and future developments in these exciting fields.

A Multifunctional Molecular Probe for Detecting Hg2+ and Ag⁺ Based on Ion-Mediated Base Mismatch

In this paper, a multifunctional biosensing platform for sensitively detecting Hg²⁺ and Ag⁺, based on ion-mediated base mismatch, fluorescent labeling, and strand displacement, is introduced. The sensor can also be used as an OR logic gate, the multifunctional design of sensors is realized. Firstly, orthogonal experiments with three factors and three levels were carried out on the designed sensor, and preliminary optimization of conditions was performed for subsequent experiments. Next, the designed sensor was tested the specificity and target selectivity under the optimized conditions, and the application to actual environmental samples further verified the feasibility. Generally, this is a convenient, fast, stable, and low-cost method that provides a variety of ideas and an experimental basis for subsequent research.

MoS2 Nanoprobe for MicroRNA Quantification Based on Duplex-Specific Nuclease Signal Amplification

MicroRNAs (miRNAs) play significant regulatory roles in physiologic and pathologic processes and are considered as important biomarkers for disease diagnostics and therapeutics. Simple, fast, sensitive, and selective detection of miRNAs, however, is challenged by their short length, low abundance, susceptibility to degradation, and homogenous sequence. Here, we report a novel design of nanoprobes for highly sensitive and selective detection of miRNAs based on MoS₂-loaded molecular beacons (MBs) and duplex-specific nuclease (DSN)-mediated signal amplification (DSNMSA). We show that MoS₂ nanosheets not only exhibit high affinity toward MBs but also act as an efficient quencher for absorbed MBs. The strong fluorescence-quenching ability of MoS₂ in combination with cyclic DSNMSA contributes to the superior sensitivity of our method, with a limit of detection 4 orders of magnitude lower than that of traditional hybridization methods. Moreover, the nanoprobes also show high selectivity for discriminating homogenous miRNA sequences with one-base differences because of the discrimination ability of MBs and DSN. Furthermore, we demonstrate that the MoS₂-loaded MB nanoprobes can be utilized for multiplexed detection of miRNAs. Given its high sensitivity and specificity, as well as the multiplexed function; this novel method as an effective tool shows a great promise for simultaneous quantitative analysis of multiple miRNAs in biomedical research and clinical diagnosis.

Ultrasensitive Detection of Metal Ions with DNA Nanostructure

In spite of its greatly scientific and technological importance, developing rapid, low cost and sensitive microarray sensors for onsite monitoring heavy metal contamination remains challenging. Here we develop a DNA nanostructured microarray (DNM) with a tubular three-dimensional sensing surface and an ordered nanotopography for rapid and sensitive multiplex detection of heavy metal ions. In our design, DNA tetrahedral-structured probes (TSPs) are used to engineer the sensing interface with spatially resolved and density-tunable sensing spots, improving the micro-confined molecular recognition. Meanwhile, a bubble-mediated shuttle reaction inside the DNM-functionalized microchannel improves the target-capturing efficiency. Thus, the sensitive and selective detection of multiple heavy metal ions (i.e., Hg²⁺, Ag⁺, and Pb²⁺) with this novel DNM biosensor can be achieved within 5 min. Moreover, the detection limit is down to 10, 10, and 20 nM for Hg²⁺, Ag⁺, and Pb²⁺, respectively. Therefore, the DNM biosensor capable of simultaneously detecting multiple heavy metal ions with sensitivity and selectivity shows great potential to be point-of-test devices.

Real-Time Continuous Identification of Greenhouse Plant Pathogens Based on Recyclable Microfluidic Bioassay System

The development of a real-time continuous analytical platform for the pathogen detection is of great scientific importance for achieving better disease control and prevention. In this work, we report a rapid and recyclable microfluidic bioassay system constructed from oligonucleotide arrays for selective and sensitive continuous identification of DNA targets of fungal pathogens. We employ the thermal denaturation method to effectively regenerate the oligonucleotide arrays for multiple sample detection, which could considerably reduce the screening effort and costs. The combination of thermal denaturation and laser-induced fluorescence detection technique enables real-time continuous identification of multiple samples (<10 min per sample). As a proof of concept, we have demonstrated that two DNA targets of fungal pathogens (Botrytis cinerea and Didymella bryoniae) can be sequentially analyzed using our rapid microfluidic bioassay system, which provides a new paradigm in the design of microfluidic bioassay system and will be valuable for chemical and biomedical analysis.

DNA Tetrahedral Nanostructure-Based Electrochemical miRNA Biosensor for Simultaneous Detection of Multiple miRNAs in Pancreatic Carcinoma

Specific and sensitive biomarker detection is essential to early cancer diagnosis. In this study, we demonstrate an ultrasensitive electrochemical biosensor with the ability to detect multiple pancreatic carcinoma (PC)-related microRNA biomarkers. By employing DNA tetrahedral nanostructure capture probes to enhance the detection sensitivity as well as a disposable 16-channel screen-printed gold electrode (SPGE) detection platform to enhance the detection efficiency, we were able to simultaneously detect four PC-related miRNAs: miRNA21, miRNA155, miRNA196a, and miRNA210. The detection sensitivity reached to as low as 10 fM. We then profiled the serum levels of the four miRNAs for PC patients and healthy individuals with our multiplexing electrochemical biosensor. Through the combined analyses of the four miRNAs, our results showed that PC patients could be discriminated from healthy controls with fairly high sensitivity. This multiplexing PCR-free miRNA detection sensor shows promising applications in early diagnosis of PC disease.

Cavity-Type DNA Origami-Based Plasmonic Nanostructures for Raman Enhancement

DNA origami has been established as addressable templates for site-specific anchoring of gold nanoparticles (AuNPs). Given that AuNPs are assembled by charged DNA oligonucleotides, it is important to reduce the charge repulsion between AuNPs-DNA and the template to realize high yields. Herein, we developed a cavity-type DNA origami as templates to organize 30 nm AuNPs, which formed dimer and tetramer plasmonic nanostructures. Transmission electron microscopy images showed that high yields of dimer and tetramer plasmonic nanostructures were obtained by using the cavity-type DNA origami as the template. More importantly, we observed significant Raman signal enhancement from molecules covalently attached to the plasmonic nanostructures, which provides a new way to high-sensitivity Raman sensing.

Bubble-Mediated Ultrasensitive Multiplex Detection of Metal Ions in Three-Dimensional DNA Nanostructure-Encoded Microchannels

The development of rapid and sensitive point-of-test devices for on-site monitoring of heavy-metal contamination has great scientific and technological importance. However, developing fast, inexpensive, and sensitive microarray sensors to achieve such a goal remains challenging. In this work, we present a DNA-nanostructured microarray (DNM) with a tubular three-dimensional sensing surface and an ordered nanotopography. This microarray enables enhanced molecular interaction toward the rapid and sensitive multiplex detection of heavy-metal ions. In our design, the use of DNA tetrahedral-structured probes engineers the sensing interface with spatially resolved and density-tunable sensing spots that improve the microconfined molecular recognition. A bubble-mediated shuttle reaction was used inside the DNM-functionalized microchannel to improve the target-capturing efficiency. Using this novel DNM biosensor, the sensitive and selective detection of multiple heavy-metal ions (i.e., Hg²⁺, Ag⁺, and Pb²⁺) was achieved within 5 min, the detection limit was down to 10, 10, and 20 nM for Hg²⁺, Ag⁺, and Pb²⁺, respectively. The feasibility of our DNM sensor was further demonstrated by probing heavy-metal ions in real water samples with a direct optical readout. Beyond metal ions, this unique DNM sensor can easily be extended to in vitro bioassays and clinical diagnostics.

A novel label-free fluorescence assay for one-step sensitive detection of Hg2+ in environmental drinking water samples

A novel label-free fluorescence assay for detection of Hg²⁺ was developed based on the Hg²⁺-binding single-stranded DNA (ssDNA) and SYBR Green I (SG I). Differences from other assays, the designed rich-thymine (T) ssDNA probe without fluorescent labelling can be rapidly formed a T-Hg²⁺-T complex and folded into a stable hairpin structure in the presence of Hg²⁺ in environmental drinking water samples by facilitating fluorescence increase through intercalating with SG I in one-step. In the assay, the fluorescence signal can be directly obtained without additional incubation within 1 min. The dynamic quantitative working ranges was 5–1000 nM, the determination coefficients were satisfied by optimization of the reaction conditions. The lowest detection limit of Hg²⁺ was 3 nM which is well below the standard of U.S. Environmental Protection Agency. This method was highly specific for detecting of Hg²⁺ without being affected by other possible interfering ions from different background compositions of water samples. The recoveries of Hg²⁺ spiked in these samples were 95.05–103.51%. The proposed method is more viable, low-costing and simple for operation in field detection than the other methods with great potentials, such as emergency disposal, environmental monitoring, surveillance and supporting of ecological risk assessment and management.

Dual-mode electrochemical analysis of microRNA-21 using gold nanoparticle-decorated MoS2 nanosheet

The detection of microRNA plays an important role in early cancer diagnosis. Herein, a dual-mode electronic biosensor was developed for microRNA-21 (miRNA-21) detection based on gold nanoparticle-decorated MoS₂ nanosheet (AuNPs@MoS₂). A classical DNA "sandwich" structure was employed to construct MoS₂-based electrochemical sensor, including capture DNA, target miRNA-21 and DNA-modified nanoprobe. [Fe(CN)₆]^3-/4- and [Ru(NH₃)₆]³⁺ were selected as electrochemical indicators to monitor the preparation process and evaluate the performance of MoS₂-based electrochemical biosensor by electrochemical impedance spectroscopy (EIS) and differential pulse voltammetry (DPV), respectively. Such MoS₂-based biosensor exhibited excellent performance for miRNA-21 detection in the range from 10 fM to 1nM with detection limit of 0.78fM and 0.45fM for DPV and EIS technique, respectively. Furthermore, the proposed MoS₂-based biosensor displayed high selectivity and stability, which could be used to determine miRNA-21 in human serum samples with satisfactory results. All data suggested that such MoS₂-based nanocomposite may be a potential candidate for biosensing ranging from nucleic acid to protein detection.

Near-Infrared-Activated Upconversion Nanoprobes for Sensitive Endogenous Zn2+ Detection and Selective On-Demand Photodynamic Therapy

As a light-activated noninvasive cancer treatment paradigm, photodynamic therapy (PDT) has attracted extensive attention because of its high treatment efficacy and low side effects. Especially, spatiotemporal control of singlet oxygen (¹O₂) release is highly desirable for realizing on-demand PDT, which, however, still remains a huge challenge. To address this issue, a novel switchable near-infrared (NIR)-responsive upconversion nanoprobe has been designed and successfully applied for controlled PDT that can be optically activated by tumor-associated disruption of labile Zn²⁺ (denoted as Zn²⁺ hereafter) homeostasis stimuli. Upon NIR irradiation, this theranostic probe can not only quantitatively detect the intracellular endogenous Zn²⁺ in situ but also selectively generate a great deal of cytotoxic reactive oxygen species (ROS) for efficiently killing breast cancer cells under the activation of excessive endogenous Zn²⁺, so as to maximally avoid adverse damage to normal cells. This study aims to propose a new tumor-specific PDT paradigm and, more importantly, provide a new avenue of thought for efficient cancer theranostics based on our designed highly sensitive upconversion nanoprobes.

Convection-Driven Pull-Down Assays in Nanoliter Droplets Using Scaffolded Aptamers

One of the great challenges in cellular studies is to develop a rapid and biocompatible analytical tool for single-cell analysis. We report a rapid, DNA nanostructure-supported aptamer pull-down (DNaPull) assay under convective flux in a glass capillary for analyzing the contents of droplets with nano- or picoliter volumes. We have demonstrated that the scaffolded aptamer can greatly improve the efficiency of target molecules' pull down. The convective flux allows complete reaction in <5 min, which is an 18-fold improvement compared to purely diffusive flux (traditional model of the stationary case). This established DNaPull assay can serve as a rapid and sensitive analytical platform for analyzing a variety of bioactive molecules, including small molecules [ATP, limit of detecton (LOD) of 1 μM], a drug (cocaine, LOD of 1 μM), and a biomarker (thrombin, LOD of 0.1 nM). Significantly, the designed microfluidic device compartmentalizes live cells into nanoliter-sized droplets to present single-cell samples. As a proof of concept, we demonstrated that cellular molecules (ATP) from a discrete number of HNE1 cells (zero to five cells) lysed inside nanoliter-sized droplets can be analyzed using our DNaPull assay, in which the intracellular ATP level was estimated to be ∼3.4 mM. Given the rapid assay feature and single-cell sample analysis ability, we believe that our analytical platform of convection-driven DNaPull in a glass capillary can provide a new paradigm in biosensor design and will be valuable for single-cell analysis.

Designing a Biostable L-DNAzyme for Lead(II) Ion Detection in Practical Samples

A promising biosensor for effectively lead (II) ion detection in practical applications was developed by constructing a Pb2+-specific L-DNAzyme, the enantiomer of the natural nucleic acid-constructed D-DNAzyme. This fluorescent sensor contains the L-enzyme strand with a quencher at the 3' end, and the L-substrate strand with a fluorophore at the 5' and a quencher at the 3' ends that formed a complex. In the presence of Pb2+, the L-substrate is cut into two fragments, leading to the recovery of fluorescence. The sensor shows high sensitivity and selectivity for Pb2+ detection with a linear response in the range of 5-100 nM and a detection limit of 3 nM in aqueous solution. Importantly, based on that L-DNAzyme consists of non-natural nucleic acids, which is insensitive to nuclease digestion, protein adsorption and D-DNA hybridization, our sensor shows specific response to Pb2+ in practical water and serum samples. Therefore, it is expected that our L-DNAzyme-based strategy may offer a new method for developing simple, rapid and sensitive sensors in complex systems.

Functionalization of graphene by a TPE-containing polymer using nitrogen-based nucleophiles

Through the nitrogen-centered anion reaction of PCT and GO, two new hybrids, RGO-PCT-i and RGO-PCT-s, were successfully prepared and applied as potential optical limiting materials.

Isothermal Amplification of Nucleic Acids

Isothermal amplification of nucleic acids is a simple process that rapidly and efficiently accumulates nucleic acid sequences at constant temperature. Since the early 1990s, various isothermal amplification techniques have been developed as alternatives to polymerase chain reaction (PCR). These isothermal amplification methods have been used for biosensing targets such as DNA, RNA, cells, proteins, small molecules, and ions. The applications of these techniques for in situ or intracellular bioimaging and sequencing have been amply demonstrated. Amplicons produced by isothermal amplification methods have also been utilized to construct versatile nucleic acid nanomaterials for promising applications in biomedicine, bioimaging, and biosensing. The integration of isothermal amplification into microsystems or portable devices improves nucleic acid-based on-site assays and confers high sensitivity. Single-cell and single-molecule analyses have also been implemented based on integrated microfluidic systems. In this review, we provide a comprehensive overview of the isothermal amplification of nucleic acids encompassing work published in the past two decades. First, different isothermal amplification techniques are classified into three types based on reaction kinetics. Then, we summarize the applications of isothermal amplification in bioanalysis, diagnostics, nanotechnology, materials science, and device integration. Finally, several challenges and perspectives in the field are discussed.

Development of mercury (II) ion biosensors based on mercury-specific oligonucleotide probes

Mercury (II) ion (Hg(2+)) contamination can be accumulated along the food chain and cause serious threat to the public health. Plenty of research effort thus has been devoted to the development of fast, sensitive and selective biosensors for monitoring Hg(2+). Thymine was demonstrated to specifically combine with Hg(2+) and form a thymine-Hg(2+)-thymine (T-Hg(2+)-T) structure, with binding constant even higher than T-A Watson-Crick pair in DNA duplex. Recently, various novel Hg(2+) biosensors have been developed based on T-rich Mercury-Specific Oligonucleotide (MSO) probes, and exhibited advanced selectivity and excellent sensitivity for Hg(2+) detection. In this review, we explained recent development of MSO-based Hg(2+) biosensors mainly in 3 groups: fluorescent biosensors, colorimetric biosensors and electrochemical biosensors.

"Turn-On" Fluorescent Probe for Mercury(II): High Selectivity and Sensitivity and New Design Approach by the Adjustment of the π-Bridge

By intelligent design, a new "turn-on" fluorescent probe (1-CN) was obtained based on the deprotection reaction of the dithioacetal promoted by Hg2+ ions, which could sense mercury ions sensitively and selectively, with the detection limit of 8×10(-7) M. Thanks to the apparent turn-on signal, 1-CN has been successfully applied to rapidly detect trace amounts of mercury ions as test strips and cell image.