Modifying of Cotton Fabric Surface with Nano-ZnO Multilayer Films by Layer-by-Layer Deposition Method

Sun-protective Properties of Technical Sportswear Fabrics 100% Polyester: The Influence of Moisture and Sweat on Protection against Different Biological Effects of Ultraviolet (UV) Radiation

The use of technical sportswear is now widespread, but the degree of protection these fabrics offer against UV radiation is not known. We have analyzed the capacity of different types of technical sportswear fabrics to protect against different UV biological effects. A sample of 34 100% polyester t-shirts from different manufactures was classified by color, fabric structure, cover factor, and due to different tonalities, dark, and clear color. Ultraviolet protection factor was calculated according to UNE-EN13758. The protection factor for other biological effects as pre-vitamin D₃ production, non-melanoma skin cancer, photoimmunosuppression, and photoaging was analyzed. The effects of moisture and sweat in protection were also evaluated. From the analyzed sample garments, more than 75% achieved an excellent protection value (protection factor 40-50+). Higher values were found in double-layer type (P < 0.05). Cover factor was the main determinant of biological protection factors with correlation coefficients of 0.81 for UPF (erythema), 0.77 for NMSC, and 0.63 for photoimmunosuppression. Water or sweat humidity saturation increased biological protection factors over a 20% (P < 0.05). The 83% of the fabrics analyzed showed less than 5% of transmittance with labeling as UVA protective elements. No effect of fabric color was found related to biological protection factors. The 100% polyester sports T-shirts of the analyzed sample offer general protection against UV for different biological effects that can be increased by humidity but no affected by fabric color.

Straightforward Approach for Preparing Durable Antibacterial ZnO Nanoparticle Coatings on Flexible Substrates

Flexible antibacterial materials have gained utmost importance in protection from the distribution of bacteria and viruses due to the exceptional variety of applications. Herein, we demonstrate a readily scalable and rapid single-step approach for producing durable ZnO nanoparticle antibacterial coating on flexible polymer substrates at room temperature. Substrates used are polystyrene, poly(ethylene-co-vinyl acetate) copolymer, poly(methyl methacrylate), polypropylene, high density polyethylene and a commercial acrylate type adhesive tape. The deposition was achieved by a spin-coating process using a slurry of ZnO nanoparticles in toluene. A stable modification layer was obtained when toluene was a solvent for the polymer substrates, namely polystyrene and poly(ethylene-co-vinyl acetate). These coatings show high antibacterial efficiency causing >5 log decrease in the viable counts of Gram-negative bacteria Escherichia. coli and Gram-positive bacteria Staphylococcus aureus in 120 min. Even after tapping these coated surfaces 500 times, the antibacterial properties remained unchanged, showing that the coating obtained by the presented method is very robust. In contrast to the above findings, the coatings are unstable when toluene is not a solvent for the substrate.

Layer-by-Layer Self-Assembly Coating for Multi-Functionalized Fabrics: A Scientometric Analysis in CiteSpace (2005-2021)

Surface-engineered coatings have been increasingly applied to functionalize fabrics due to the ease of deposition of the coatings and their effectiveness in endowing the fabric with abundant properties. Among the surface modification methods, layer-by-layer (LbL) self-assembly has emerged as an important approach for creating multifunctional surfaces on fabrics. In this review, bibliometric analysis with the visualization analysis of LbL self-assembly coatings on fabrics was performed on publications extracted from the Web of Science (WOS) from 2005 to 2021 based on the CiteSpace software. The analysis results showed that research on LbL self-assembly coatings on fabrics has attracted much attention, and this technique has plentiful and flexible applications. Moreover, research on the LbL self-assembly method in the field of functionalization of fabrics has been summarized, which include flame retardant fabric, antibacterial fabric, ultraviolet resistant fabric, hydrophobic fabric and electromagnetic shielding fabric. It was found that the functionalization of the fabric has been changing from singularity to diversification. Based on the review, several future research directions can be proposed. The weatherability, comfort, cost and environmental friendliness should be considered when the multifunctional coatings are designed.

Preparation of Cotton-Zinc Composites by Magnetron Sputtering Metallization and Evaluation of their Antimicrobial Properties and Cytotoxicity

The aim of this investigation was to evaluate the biological properties of cotton-zinc composites. A coating of zinc (Zn) on a cotton fabric was successfully obtained by a DC magnetron sputtering system using a metallic Zn target (99.9%). The new composite was characterized using scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDS), UV/Vis transmittance, and atomic absorption spectrometry with flame excitation (FAAS). The composite was tested for microbial activity against colonies of Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria and antifungal activity against Aspergillus niger and Chaetomium globosum fungal mold species as model microorganisms. Cytotoxicity screening of the tested modified material was carried out on BALB/3T3 clone mouse fibroblasts. The SEM/EDS and FAAS tests showed good uniformity of zinc content on a large surface of the composite. The conducted research showed the possibility of using the magnetron sputtering technique as a zero-waste method for producing antimicrobial textile composites.

Nanotechnology as a Novel Approach in Combating Microbes Providing an Alternative to Antibiotics

The emergence of infectious diseases promises to be one of the leading mortality factors in the healthcare sector. Although several drugs are available on the market, newly found microorganisms carrying multidrug resistance (MDR) against which existing drugs cannot function effectively, giving rise to escalated antibiotic dosage therapies and the need to develop novel drugs, which require time, money, and manpower. Thus, the exploitation of antimicrobials has led to the production of MDR bacteria, and their prevalence and growth are a major concern. Novel approaches to prevent antimicrobial drug resistance are in practice. Nanotechnology-based innovation provides physicians and patients the opportunity to overcome the crisis of drug resistance. Nanoparticles have promising potential in the healthcare sector. Recently, nanoparticles have been designed to address pathogenic microorganisms. A multitude of processes that can vary with various traits, including size, morphology, electrical charge, and surface coatings, allow researchers to develop novel composite antimicrobial substances for use in different applications performing antimicrobial activities. The antimicrobial activity of inorganic and carbon-based nanoparticles can be applied to various research, medical, and industrial uses in the future and offer a solution to the crisis of antimicrobial resistance to traditional approaches. Metal-based nanoparticles have also been extensively studied for many biomedical applications. In addition to reduced size and selectivity for bacteria, metal-based nanoparticles have proven effective against pathogens listed as a priority, according to the World Health Organization (WHO). Moreover, antimicrobial studies of nanoparticles were carried out not only in vitro but in vivo as well in order to investigate their efficacy. In addition, nanomaterials provide numerous opportunities for infection prevention, diagnosis, treatment, and biofilm control. This study emphasizes the antimicrobial effects of nanoparticles and contrasts nanoparticles' with antibiotics' role in the fight against pathogenic microorganisms. Future prospects revolve around developing new strategies and products to prevent, control, and treat microbial infections in humans and other animals, including viral infections seen in the current pandemic scenarios.

Coating of ZnO Nanoparticle on Cotton Fabric to Create a Functional Textile with Enhanced Mechanical Properties

The goal of this research is to develop a functional textile with better mechanical properties. Therefore, nano ZnO is synthesized, characterized, and applied to cotton fabric by mechanical thermo-fixation techniques. The synthesized nanoparticles are characterized by SEM and XRD analysis. The ZnO nanoparticle alone, ZnO nanoparticle with a binder, and ZnO with a binder and wax emulsion are then applied on cotton woven fabrics using three different recipes. The surface morphology of the treated fabric is studied using SEM and EDS. Antimicrobial activity, UV protection property, and crease resistance are all tested for their functional characteristics. In addition, all vital mechanical characteristics are assessed. The results suggest that using only nano ZnO or nano ZnO with a binder enhances functional features while deteriorating mechanical capabilities. Nano ZnO treatment with the third recipe, which includes the addition of an emulsion, on the other hand, significantly enhances mechanical and functional characteristics. Consequently, this study provides information to optimize the confidence of textile researchers and producers in using nano ZnO and understanding its features in key functional fabrics.

Moxifloxacin and Sulfamethoxazole-Based Nanocarriers Exhibit Potent Antibacterial Activities

Antibiotic resistance is a major concern given the rapid emergence of multiple-drug-resistant bacteria compared to the discovery of novel antibacterials. An alternative strategy is enhancing the existing available drugs. Nanomedicine has emerged as an exciting area of research, showing promise in the enhanced development of existing antimicrobials. Herein, we synthesized nanocarriers and loaded these with available clinically approved drugs, namely Moxifloxacin and Sulfamethoxazole. Bactericidal activity against Gram-negative (Serratia marcescens, Pseudomonas aeruginosa, Klebsiella pneumoniae, and Salmonella enterica) and Gram-positive (methicillin-resistant Staphylococcus aureus, Streptococcus pneumoniae, and Bacillus cereus) bacteria was investigated. To characterize the nanocarriers and their drug-loaded forms, Fourier-transform infrared spectroscopy, dynamic light scattering, and atomic force microscopy were utilized. Antibacterial assays and hemolysis assays were carried out. Moreover, lactate dehydrogenase assays were performed to determine cytotoxicity against human cells. The results depicted the successful formation of drug-nanocarrier complexes. The potent antibacterial activities of the drug-loaded nanocarriers were observed and were significantly enhanced in comparison to the drugs alone. Hemolysis and cytotoxicity assays revealed minimal or negligible cytotoxic effects against human red blood cells and human cells. Overall, metronidazole-based nanocarriers loaded with Moxifloxacin and Sulfamethoxazole showed enhanced bactericidal effects against multiple-drug-resistant bacteria compared with drugs alone, without affecting human cells. Our findings show that drug-loaded nanocarriers hold promise as potent chemotherapeutic drugs against multiple-drug-resistant bacteria.

Antimicrobial Resistance and Antimicrobial Nanomaterials

Back in the mid-nineties, the discovery of antimicrobials denoted a profound and remarkable achievement in medicine which was capable of saving lives. However, recently, antimicrobial resistance became a major global issue facing modern medicine and significantly increased among bacteria, fungi, and viruses which results in reduced efficacy of many clinically important and lifesaving antimicrobials. The growing rise of antimicrobial resistance inflicts a remarkable economic and social burden on the health care system globally. The replacement of conventional antimicrobials by new technology to counteract and lessen antimicrobial resistance is currently ongoing. Nanotechnology is an advanced approach to overcome challenges of such resisted conventional drug delivery systems mainly based on the development and fabrication of nanoparticulate structures. Numerous forms of nanoparticulate systems have been discovered and tried as prospective drug delivery systems, comprising organic and inorganic nanoparticles.

Antimicrobial Resistance and Antimicrobial Nanomaterials

Back in the mid-nineties, the discovery of antimicrobials denoted a profound and remarkable achievement in medicine which was capable of saving lives. However, recently, antimicrobial resistance became a major global issue facing modern medicine and significantly increased among bacteria, fungi, and viruses which results in reduced efficacy of many clinically important and lifesaving antimicrobials. The growing rise of antimicrobial resistance inflicts a remarkable economic and social burden on the health care system globally. The replacement of conventional antimicrobials by new technology to counteract and lessen antimicrobial resistance is currently ongoing. Nanotechnology is an advanced approach to overcome challenges of such resisted conventional drug delivery systems mainly based on the development and fabrication of nanoparticulate structures. Numerous forms of nanoparticulate systems have been discovered and tried as prospective drug delivery systems, comprising organic and inorganic nanoparticles.

Surfactant-free and rinsing-resistant biodegradable nanoparticles with high adsorption on natural fibers for the long-lasting release of fragrances

Synthetic polymers are attracting growing attention as additives for laundry and personal care products. In particular, the high volatility of many common fragrances requires the development of polymeric particles for their encapsulation and controlled release. Unfortunately, the vast majority of these carriers is made from polymers that are not biodegradable. This poses severe concerns about the accumulation of nano- and microplastics. Hence, such particles are expected to be banned from the market in the coming years. Therefore, biodegradable particles enabling a long-lasting release of the fragrances are urgently needed. In this work, we produced biodegradable nanoparticles (NPs) that are structurally composed of lactones, i.e. well known perfumes that occur naturally and that are already considered safe by regulatory agencies. We polymerized these lactones via ring opening polymerization (ROP) using an ionizable tertiary amine as initiator to produce in a single step amphiphilic oligoesters able to directly self-assemble into NPs once nanoprecipitated in water. In this way, we can produce biodegradable NPs with a perfume loading up to 85 % w/w without the need for additional surfactants. Subsequently we show that the ionizable group is able to confer a positive charge to our nanoparticles and, in turn, a high adsorption capacity on natural fibers (i.e. hairs and cotton fabric). Finally, we demonstrate the nanoparticle resistance to rinsing and their ability to confer a long-lasting fragrance perception to treated hair swatches for at least 3 weeks.

Emerging Developments in the Use of Electrospun Fibers and Membranes for Protective Clothing Applications

There has been increased interest to develop protective fabrics and clothing for protecting the wearer from hazards such as chemical, biological, heat, UV, pollutants etc. Protective fabrics have been conventionally developed using a wide variety of techniques. However, these conventional protective fabrics lack breathability. For example, conventional protective fabrics offer good protection against water but have limited ability in removing the water vapor and moisture. Fibers and membranes fabricated using electrospinning have demonstrated tremendous potential to develop protective fabrics and clothing. These fabrics based on electrospun fibers and membranes have the potential to provide thermal comfort to the wearer and protect the wearer from wide variety of environmental hazards. This review highlights the emerging applications of electrospinning for developing such breathable and protective fabrics.

Functionalized Cellulose Nanocrystals: A Potential Fire Retardant for Polymer Composites

The flammability of synthetic thermoplastic polymers has been recognized as an increasingly important safety problem. The goal of this study was to evaluate a green and safe fire-retardant system comprising of cellulose nanocrystals (CNC) and zinc oxide nanoparticles (ZnO). CNCs coated with nano ZnO were incorporated in the high-density polyethylene polymer (HDPE) matrix at different concentrations. Fire testing results of different formulations of HDPE containing 0.4 to 1.0% zinc oxide coated CNC exhibited a substantial decrease in the average mass loss, peak heat release rate and total smoke release. The time to ignition exhibited a positive correlation with CNC-ZnO concentration. Modest improvement in the flexural strength and moduli of composites was noticed validating no adverse effects of CNC-ZnO complex. The transmission electron microscopy further confirmed dispersion of nanoparticles as well as the presence of some nanoparticle aggregates in the matrix. The uniform dispersion of CNC-ZnO complex is expected to further improve fire and mechanical properties of polymer.

Layer-by-Layer Self-Assembly Strategy for Surface Modification of Aramid Fibers to Enhance Interfacial Adhesion to Epoxy Resin

In this work, the layer-by-layer self-assembly technology was used to modify aramid fibers (AFs) to improve the interfacial adhesion to epoxy matrix. By virtue of the facile layer-by-layer self-assembly technique, poly(l-3,4-Dihydroxyphenylalanine) (l-PDOPA) was successfully coated on the surface of AFs, leading to the formation of AFs with controllable layers (nL-AF). Then, a hydroxyl functionalized silane coupling agent (KH550) was grafted on the surface of l-PDOPA coated AFs. The properties such as microstructure and surface morphology of AFs before and after modification were characterized by FTIR, XPS and FE-SEM. The results confirmed that l-PDOPA and KH550 were successfully introduced into the surface of AFs by electrostatic adsorption. The interfacial properties of AFs reinforced epoxy resin composites before and after coating were characterized by interfacial shear strength (IFSS), interlaminar shear strength (ILSS) and FE-SEM, and the results show that the interfacial adhesion properties of the modified fiber/epoxy resin composites were greatly improved.

ZnO Microstructures as Flame-Retardant Coatings on Cotton Fabrics

In this study, we report a unique strategy that utilizes ZnO and ZnS microparticles and rods as fire-retardant materials when coated onto cotton fabrics. ZnO and ZnO/ZnS microparticles or rods were grown or adsorbed to the surface of cotton fibers. Properties such as heat release rate, total smoke release, and mass loss rate of the materials were tested using a cone calorimeter. ZnO and ZnO/ZnS rods were able to reduce the heat release rate and total smoke release from 118 kW/m² and 18.3 m²/m² to about 70.0 kW/m² and 6.00 m²/m², respectively. The maximum average rate of heat emission and fire growth rate index, which is used to evaluate the fire spread rate, the size of the fire, and the propensity of fire development, were improved with these coatings and indicate that there are potential applications of these materials as fire retardants.

Growing ZnO Nanoparticles on Polydopamine-Templated Cotton Fabrics for Durable Antimicrobial Activity and UV Protection

This work aims to develop durable functional cotton fabrics by growing zinc oxide (ZnO) nanoparticles on polydopamine (PDA) templates. ZnO nanoparticles were grown on the PDA-templated cotton fabrics by the hydrothermal method at room temperature. The surface morphology, chemical composition, and crystalline structure of the ZnO-coated cotton fabrics were characterized by scanning electron microscope (SEM) with energy dispersive X-ray analysis (EDX), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The ZnO nanoparticles were found to disperse evenly on the surface of cotton fabrics. The ultraviolet (UV) protection factor (UPF) value of the ZnO-coated cotton fabrics was maintained at 122.5, and 99% reduction in bacterial load was observed against Gluconobacter cerinus even after five cycles of laundering. The PDA was found to be effective in fixing the ZnO seeds tightly on the surface of cotton fabrics, resulting in excellent durability of the coating of ZnO nanoparticles.

Homogeneous grafting of cellulose with polycaprolactone using quaternary ammonium salt systems and its application for ultraviolet-shielding composite films

Microcrystalline cellulose grafted polycaprolactone (MCC-g-PCL) was successfully synthesized by ring-opening copolymerization catalyzed by 4-dimethylaminopyridine in a dual tetrabutylammonium acetate/dimethyl sulfoxide solvent system. A novel ultraviolet-shielding film based on MCC-g-PCL was prepared by introducing graphene oxide (GO). The results obtained showed that the introduction of GO not only obviously influenced the inherent structure of the MCC-g-PCL but remarkably changed the surface morphology of the composite film. Moreover, the GO/MCC-g-PCL composite showed a significant improvement in tensile strength, from 2.63 to 4.55 MPa, as well as elongation-at-break, from 6.4% to 15.5%, compared with the pure MCC-g-PCL film, owing to the strong hydrogen-bonding interaction that physically crosslinked GO with MCC-g-PCL. Importantly, GO/MCC-g-PCL composite films offered an effective high-energy light-shielding capacity; in particular MCC-g-PCL film containing 1.0 wt% GO possessed good absorbance between 200 nm and 300 nm. This study provides a framework for developing cellulose-based ultraviolet-shielding polymers and better understanding the ultraviolet-shielding mechanism.

Microcrystalline cellulose graft polycaprolactone (MCC-g-PCL) was successfully synthesized by ring-opening copolymerization catalyzed by 4-dimethylaminopyridine in a dual tetrabutylammonium acetate/dimethyl sulfoxide solvent system.

Imparting Pharmaceutical Applications to the Surface of Fabrics for Wound and Skin Care by Ultrasonic Waves

In this review, we report the functionalization of textiles composed of nanoscale reactive materials in the treatment of wounds and skin diseases such as acne. In view of the growing demand for high-quality textiles, much research is focused on the creation of antimicrobial finishings for fabrics, in order to protect customers from pathogenic or odorgenerating microorganisms. We present coatings from inorganic, organic and biochemical nanoparticles (NPs) on surfaces that impart the ability to kill bacteria, avoid biofilm formation and speed up the recovery of wounds. In all three cases, sonochemistry is used for immobilizing the nanoparticles on the surfaces. The Introduction broadly covers the progress of nanotechnology in the fields of wound and skin care. The first section of this review outlines the mechanism of the ultrasound-assisted deposition of nanoparticles on textiles. The coating can be performed by an in-situ process in which the nanoparticles are formed and subsequently thrown onto the surface of the fabrics at a very high speed. This approach was used in depositing metal-oxide NPs such as ZnO, CuO and Zn-CuO or the organic NPs of tannic acid, chitosan, etc. on textiles. In addition, the sonochemical process can be used as a "throwing stone" technique, namely, previously synthesized or commercially purchased NPs can be placed in the sonication bath and sonicated in the presence of the fabric. The collapse of the acoustic bubble in the solution causes the throwing of the immersed commercial NPs onto the textiles. This section will also outline why sonochemical deposition on textiles is considered the best coating technique. The second section will discuss new applications of the sonochemically- coated textiles in killing bacteria, avoiding biofilm formation and more. Two points should be noted: 1) the review will primarily report results obtained at Bar-Ilan University and 2) since for all textiles tested in our experiments (cotton, polyester, nylon, nonwoven) similar results were obtained, the type of textile used in a specific experiment will not be mentioned - textiles will be discussed in general. It is also worth emphasizing that this review concentrates only on the sonochemical coating of textiles, ignoring other deposition techniques.

Emerging nanotechnology based strategies for diagnosis and therapeutics of urinary tract infections: A review

At present, various diagnostic and therapeutic approaches are available for urinary tract infections. But, still the quest for development of more rapid, accurate and reliable approach is an unending process. The pathogens, especially uropathogens are adapting to new environments and antibiotics day by day rapidly. Therefore, urinary tract infections are evolving as hectic and difficult to eradicate, increasing the economic burden to the society. The technological advances should be able to compete the adaptability characteristics of microorganisms to combat their growth in new environments and thereby preventing their infections. Nanotechnology is at present an extensively developing area of immense scientific interest since it has diverse potential applications in biomedical field. Nanotechnology may be combined with cellular therapy approaches to overcome the limitations caused by conventional therapeutics. Nanoantibiotics and drug delivery using nanotechnology are currently growing areas of research in biomedical field. Recently, various categories of antibacterial nanoparticles and nanocarriers for drug delivery have shown their potential in the treatment of infectious diseases. Nanoparticles, compared to conventional antibiotics, are more beneficial in terms of decreasing toxicity, prevailing over resistance and lessening costs. Nanoparticles present long term therapeutic effects since they are retained in body for relatively longer periods. This review focuses on recent advances in the field of nanotechnology, principally emphasizing diagnostics and therapeutics of urinary tract infections.

Impact of nanostructured thin ZnO film in ultraviolet protection

Nanoscale ZnO is one of the best choices for ultraviolet (UV) protection, not only because of its antimicrobial properties but also due to its potential application for UV preservation. However, the behavior of nanostructured thin ZnO films and long-term effects of UV-radiation exposure have not been studied yet. In this study, we investigated the UV-protection ability of sol gel-derived thin ZnO films after different exposure times. Scanning electron microscopy, atomic force microscopy, and UV-visible optical spectroscopy were carried out to study the structure and optical properties of the ZnO films as a function of the UV-irradiation time. The results obtained showed that the prepared thin ZnO films were somewhat transparent under the visible wavelength region and protective against UV radiation. The UV-protection factor was 50+ for the prepared samples, indicating that they were excellent UV protectors. The deposited thin ZnO films demonstrated promising antibacterial potential and significant light absorbance in the UV range. The experimental results suggest that the synthesized samples have potential for applications in the health care field.

Surface modification of polypropylene non-woven fibers with TiO2 nanoparticles via layer-by-layer self assembly method: Preparation and photocatalytic activity

Polypropylene (PP) meltblown fibers were coated with titanium dioxide (TiO2) nanoparticles using layer-by-layer (LbL) deposition technique. The fibers were first modified with 3 layers of poly(4-styrenesulfonic acid) (PSS) and poly(diallyl-dimethylammonium chloride) (PDADMAC) to improve the anchoring of the TiO2 nanoparticle clusters. PDADMAC, which is positively charged, was then used as counter polyelectrolyte in tandem with anionic TiO2 nanoparticles to construct TiO2/PDADMAC bilayer in the LbL fashion. The number of deposited TiO2/PDADMAC layers was varied from 1 to 7 bilayer, and could be used to adjust TiO2 loading. The LbL technique showed higher TiO2 loading efficiency than the impregnation approach. The modified fibers were tested for their photocatalytic activity against a model dye, Methylene Blue (MB). Results showed that the TiO2 modified fibers exhibited excellent photocatalytic activity efficiency similar to that of TiO2 powder dispersed in solution. The deposition of TiO2 3 bilayer on the PP substrate was sufficient to produce nanocomposite fibers that could bleach the MB solution in less than 4hr. TiO2-LbL constructions also preserved TiO2 adhesion on substrate surface after 1cycle of photocatalytic test. Successive photocatalytic test showed decline in MB reduction rate with loss of TiO2 particles from the substrate outer surface. However, even in the third cycle, the TiO2 modified fibers are still moderately effective as it could remove more than 95% of MB after 8hr of treatment.

New advances in protection against solar ultraviolet radiation in textiles for summer clothing

Clothing is considered one of the most important tools for photoprotection against harmful solar ultraviolet radiation (UVR). The standard for sun-protective clothing is based on erythema despite other biological effects of UVR on the skin. We analyzed the potential protection against UVR in fabrics destined for summer clothing based on several action spectra. We examined 50 garments classified by type of fabric composition, structure of the fiber yarn and color. The ultraviolet protection factor was calculated based on fabric ultraviolet transmittance corrected for erythema according to the EU standard E-13758 as well as the UVA transmittance of fabrics. UVR protection was also analyzed in base of different action spectra as for previtamin D3, nonmelanoma skin cancer, photoimmunosuppression and photoaging. Most knitted fabrics used for sports T-shirts offered excellent ratings for ultraviolet protection while normal shirts showed very low ratings, particularly against photoaging. The cover is the most influential variable in fabric photoprotection, having an exponential relationship with the UPF. The relation between cover and UVA protection was linearly negative. Information about ultraviolet protection in textiles used for summer clothing should be included in labeling as some types of fabrics, especially those used for shirts, offer very low UVR protection.

ZnO nano reactor on textiles and polymers: ex situ and in situ synthesis, application, and characterization

Zinc oxide consumption has increased in today's world. It is one of the most popular nanoparticles with photocatalytic activity under light illumination utilized in different industries, especially in textiles and polymers. Lately, textiles and polymers with new features have been produced through utilization of ZnO nanoparticles to create photocatalytic characteristics, UV absorption, self-cleaning, and antimicrobial properties. Various approaches have been introduced to synthesize and apply nanoparticles on the textile and polymer surfaces such as cotton, polyester, wool, and others. This review presents diverse aspects of nano zinc oxide application in textile and polymer industry and approaches used for in situ and ex situ synthesis and application of nano zinc oxide on different textiles and polymers. This also brings a brief overview on the several studies accomplished in this area.

"Nanoantibiotics": a new paradigm for treating infectious diseases using nanomaterials in the antibiotics resistant era

Despite the fact that we live in an era of advanced and innovative technologies for elucidating underlying mechanisms of diseases and molecularly designing new drugs, infectious diseases continue to be one of the greatest health challenges worldwide. The main drawbacks for conventional antimicrobial agents are the development of multiple drug resistance and adverse side effects. Drug resistance enforces high dose administration of antibiotics, often generating intolerable toxicity, development of new antibiotics, and requests for significant economic, labor, and time investments. Recently, nontraditional antibiotic agents have been of tremendous interest in overcoming resistance that is developed by several pathogenic microorganisms against most of the commonly used antibiotics. Especially, several classes of antimicrobial nanoparticles (NPs) and nanosized carriers for antibiotics delivery have proven their effectiveness for treating infectious diseases, including antibiotics resistant ones, in vitro as well as in animal models. This review summarizes emerging efforts in combating against infectious diseases, particularly using antimicrobial NPs and antibiotics delivery systems as new tools to tackle the current challenges in treating infectious diseases.