Fibrils of γ-Oryzanol + β-Sitosterol in Edible Oil Organogels

Formation, characterization, and application of natural bioactive phytosterol-based oleogels: A review

Oleogels are innovative structured fat systems that can replace detrimental lipids and saturated fats. Among the various gelators used to construct oleogels, phytosterols are regarded as potential oleogelators due to ability to lower blood cholesterol levels and protect patients from cardiovascular illnesses, although little research has been conducted on phytosterols. This article examines the formation, characterization, and application of phytosterol-based oleogels in detail. The oleogelation behaviors of phytosterol-based oleogels are affected by their formulation, which includes phytosterol type, combined oleogelator, proportion, concentration and oil type. These oleogels exhibit potential applications as solid fat substitutes without affecting the texture or sensory properties of food products or as effective delivery vehicles. To encourage the research and implementation of phytosterol-based oleogels, we will ultimately not only highlight problems related to their use in food processing, but also provide a few viewpoints, with the goal of providing fresh insights for advancing trends.

Effect of different gelators on the physicochemical properties and microstructure of coconut oleogels

BACKGROUND

The inherent properties of coconut oil (CO), including its elevated saturated fatty acid content and low melting point, make it suitable for application in plastic fat processing. The present study explores the physicochemical characteristics, micromorphology and oxidative stability of oleogels produced from CO using various gelators [ethylcellulose (EC), β-sitosterol/γ-oryzanol (PS) and glyceryl monostearate (MG)] to elucidate the formation mechanisms of coconut oleogels (EC-COO, PS-COO and MG-COO).

RESULTS

Three oleogel systems exhibited a solid-like behavior, with the formation of crystalline forms dominated by β and β'. Among them, PS-COO exhibited enhanced capability with respect to immobilizing liquid oils, resulting in solidification with high oil-binding capacity, moderate hardness and good elasticity. By contrast, MG-COO demonstrated inferior stability compared to PS-COO and EC-COO. Furthermore, MG-COO and PS-COO demonstrated antioxidant properties against CO oxidation, whereas EC-COO exhibited the opposite effect. PS-COO and EC-COO exhibited superior thermodynamic behavior compared to MG-COO.

CONCLUSION

Three oleogels based on CO were successfully prepared. The mechanical strength, storage modulus and thermodynamic stability of the CO oleogel exhibited concentration dependence with increasing gelling agent addition. PS-COO demonstrated relatively robust oil-binding capacity and oxidative stability, particularly with a 15% PS addition. This information contributes to a deeper understanding of CO-based oleogels and offers theoretical insights for their application in food products. © 2024 Society of Chemical Industry.

Oleogels: Versatile Novel Semi-Solid System for Pharmaceuticals

Oleogels is a novel semi-solid system, focusing on its composition, formulation, characterization, and diverse pharmaceutical applications. Due to their stability, smoothness, and controlled release qualities, oleogels are frequently utilized in food, cosmetics, and medicinal products. Oleogels are meticulously formulated by combining oleogelators like waxes, fatty acids, ethyl cellulose, and phytosterols with edible oils, leading to a nuanced understanding of their impact on rheological characteristics. They can be characterized by methods like visual inspection, texture analysis, rheological measurements, gelation tests, and microscopy. The applications of oleogels are explored in diverse fields such as nutraceuticals, cosmetics, food, lubricants, and pharmaceutics. Oleogels have applications in topical, transdermal, and ocular drug delivery, showcasing their potential for revolutionizing drug administration. This review aims to enhance the understanding of oleogels, contributing to the evolving landscape of pharmaceutical formulations. Oleogels emerge as a versatile and promising solution, offering substantial potential for innovation in drug delivery and formulation practices.

Recent Advances in Lipid Crystallization in the Food Industry

This review discusses fundamental concepts of fat crystallization and how various processing conditions such as crystallization temperature, cooling rate, and shear or agitation affect this process. Traditional methods used to process fats, such as the use of scraped surface heat exchangers, fractionation, and interesterification, are described. Parameters that affect fat crystallization in these systems, such as shear, crystallization temperature, type of fat, and type of process, are discussed. In addition, the use of minor components to induce or delay fat crystallization based on their chemical composition is presented. The use of novel technologies, such as high-intensity ultrasound, oleogelation, and high-pressure crystallization is also reviewed. In these cases, acoustic and high-pressure process parameters, the various types of oleogels, and the use of oleogelators of differing chemical compositions are discussed. The combination of all these techniques and future trends is also presented.

Towards the development of novel bicomponent phytosterol-based oleogels with natural phenolics

Structuring liquid oils into edible oleogels from natural and abundant plant ingredients has great significance in fields ranging from foods to pharmaceuticals but has proven challenging. Herein, novel bicomponent phytosterol-based oleogels were developed with natural phenolics. Investigating diverse natural phenolics, cinnamic acid (CA) and ethyl ferulate (EF) successfully formed oleogels in combination with phytosterols (PS), where a synergistic effect on the oleogelation and crystallization was observed compared to the corresponding single component formulations. FTIR and UV-vis spectra showed that the gel network was primarily driven by hydrogen bonding and π-π stacking. Furthermore, oscillatory shear demonstrated oleogels featured higher elastic and network structure deformation at molar ratio of 5:5 and 3:7. Moreover, the bicomponent phytosterol-based oleogels displayed partially reversible shear deformation and a reversible solid-liquid transition. Such information was useful for engineering the functional properties of oleogel-based lipidic materials, providing significance for the application in foods, cosmetics and pharmaceuticals industries.

Preparation of Citral Oleogel and Antimicrobial Properties

The objective of this study was to analyze a natural and safe oleogel with antimicrobial properties that can replace animal fats while lengthening the product's shelf life. The oleogel was created using direct dispersion (MG-SO), and its material characterization exhibited the exceptional performance of the hybrid gelant. Additionally, citral was integrated into the oil gel to prepare the citral oleogel (MG-SO). The antimicrobial nature of the material was examined and the findings revealed that it inhibited the growth of various experimental model bacteria, including Escherichia coli, Staphylococcus aureus, Aspergillus niger, Botrytis cinerea, and Rhizopus stolonifer. In addition, the material had a comparable inhibitory impact on airborne microorganisms. Lastly, MG-SON was utilized in plant-based meat patties and demonstrated an ability to significantly reduce the growth rate of microorganisms.

A review of different frying oils and oleogels as alternative frying media for fat-uptake reduction in deep-fat fried foods

Purpose

This review aims to examine the potential of oleogels as a frying medium to decrease oil absorption during deep-frying and enhance the nutritional and energy content of foods. By investigating the factors influencing oil incorporation during deep-frying and examining the application of oleogels in this process, we seek to provide insights into using oleogels as an alternative to traditional cooking oils.

Scope

Deep-frying, a widely used cooking method, leads to the retention of large amounts of oil in fried food, which has been associated with health concerns. To address this issue, researchers have investigated various methods to minimize oil absorption during frying. One promising approach is the use of oleogels, which are thermo-reversible, three-dimensional gel networks formed by entrapment of bulk oil with a low concentration (<10% of weight) of solid lipid materials known as oleogelators. This review will focus on the following aspects: a) an overview of deep-fried foods, b) factors influencing oil uptake and underlying mechanisms for oil absorption during deep-frying, c) the characterization and application of different frying oils and their oleogels in deep-fried foods, d) components of the oleogel system for deep-frying, and e) the health impact, oxidative stability, and sensory acceptability of using oleogels in deep-frying.

Key findings

The review highlights the potential of oleogels as a promising alternative frying medium to reduce fat absorption in deep-fried foods. Considering the factors influencing oil uptake during deep-frying, as well as exploring the properties and applications of different frying oils and their oleogels, can result in improved product qualities and heightened consumer acceptance. Moreover, oleogels offer the advantage of lower fat content in fried products, addressing health concerns associated with traditional deep-frying methods. The capacity to enhance the nutritional and energy profile of foods while preserving sensory qualities and oxidative stability positions oleogels as a promising choice for upcoming food processing applications.

Role of the polyphenol content on the structuring behavior of liposoluble gelators in extra virgin olive oil

The role of polyphenols in affecting the structural and rheological properties of oleogels was investigated. Polyphenols were selectively removed from extra virgin olive oil (EVOO), and the resulting oils at three different polyphenol levels were gelled by using 10% (w/w) of monoglycerides (MG), rice wax (RW), sunflower wax (SW), and a mixture of β-sitosterol/γ-oryzanol (PS). The structural characteristics of oleogels were assessed by visual appearance, rheology, polarized light microscopy, calorimetry, XRD, and FTIR. Polyphenol content differently affected oleogel characteristics depending on network features. While EVOO-polyphenols did not influence PS- and SW-based oleogels, they reinforced MG- and RW-based oleogel network. As polyphenol content increased, the critical stress and melting temperature also increased, concomitantly with changes in crystal morphology. This was attributed to the capacity of polyphenols to form additional junction points in the crystalline network.

Controlled volatile release from β-sitosterol-based oleogels based on different self-assembly mechanisms

This study examined how the self-assembly mechanisms of β-sitosterol-based oleogels influenced the release of volatile compounds. Microscopy, X-ray diffraction (XRD) and small-angle X-ray scattering (SAXS) measurements showed that the three β-sitosterol-based oleogels (β-sitosterol + γ-oryzanol oleogels (SO), β-sitosterol + lecithin oleogels (SL) and β-sitosterol + monostearate oleogels (SM)) had significant differences in their microstructures, which were formed via different self-assembly mechanisms. SO exhibited the highest oil binding capacity (OBC), complex modulus (G*) and apparent viscosity. Dynamic and static headspace analyses suggested that network structure of β-sitosterol-based oleogels affected the release of volatile components. SO showed the strongest retention effect, followed by SL and SM. The release of volatile compounds mainly related to structural strength and compositions of oleogels. These results indicated that β-sitosterol-based oleogels formed with different self-assembly mechanisms have the potential to serve as effective delivery systems for controlling the release of volatile compounds.

Exploring how changes to the steroidal core alter oleogelation capability in sterol: γ-oryzanol blends

Oleogels based on sterols such as β-sitosterol blended with the sterol ester γ-oryzanol are a very interesting class of systems, but there are aspects of their formation and structure that remain elusive. It has previously been shown that a methyl group on the C30 position of the sterol-ester plays an important role in gelation. This work explored the effect that having C30 methyl groups on both the sterol and the sterol-ester had on the gelation process and subsequent gel structure. Lanosterol and saponified γ-oryzanol (which was synthesized as part of this study) were identified as materials of interest, as both feature a methyl group on the C30 position of their steroidal cores. It was observed that both sterols formed gels when blended with γ-oryzanol, and also that lanosterol gelled sunflower oil without the addition of γ-oryzanol. All of these gels were significantly weaker than that formed by β-sitosterol blended with γ-oryzanol. To explore why, molecular docking simulations along with AFM and SAXS were used to examine these gels on a broad range of length scales. The results suggest that saponified γ-oryzanol-γ-oryzanol gels have a very similar structure to that of β-sitosterol-γ-oryzanol gels. Lanosterol-γ-oryzanol gels and pure lanosterol gel, however, form with a totally different structure facilitated by the head-to-tail stacking motif exhibited by lanosterol. These results give further evidence that relatively slight changes to the molecular structure of gelators can result in significant differences in subsequent gel properties.

Edible oleogels stabilized solely by stigmasterol: effect of oil type and gelator concentration

BACKGROUND

Phytosterols are considered to be one of the most promising gelators for obtaining oleogel because of their additional health benefits and natural coexist with vegetable oils. Previous studies have confirmed that individual phytosterols are not capable of structuring vegetable oils unless they act synergistically with other components. However, based on the self-assembly properties of stigmasterol (ST) in organic solvents, we speculate that it can also structure vegetable oils as a gelator alone.

RESULTS

For the first time, the present study confirmed the feasibility of using ST alone as a gelator for structuring of vegetable oils, including rapeseed oil (RSO), olive oil (OLO) and flaxseed oil (FSO). RSO had the lowest ST gelation concentration (4%, w/w), and the oil-binding capacity and firmness value of the oleogels were the highest. The rheological results showed that all the samples were gelatinous (G' > G″). The results of differential scanning calorimeter and X-ray diffraction further confirmed that the properties of RSO-based oleogels are superior to those prepared by OLO and FSO. The microscopic results also confirmed that the crystal structure of RSO oleogels was more uniform, smaller and more densely distributed.

CONCLUSION

The structural properties of the oleogels were positively correlated with the ST concentration, and various analysis indicators showed that the performance of the oleogel based on RSO was better than that of OLO and FSO. In summary, the present study used ST as a gelator to successfully prepare oleogels with excellent properties, which provides a feasible reference for researchers in related fields. © 2022 Society of Chemical Industry.

Building blocks of β-sitosterol-γ-oryzanol gels revealed by small-angle neutron scattering and real space modelling

Mixtures of β-sitosterol and γ-oryzanol form gels in a range of organic solvents. Despite being widely studied, particularly as potential oleogels for food application, details of the intrinsic gel-forming building blocks remain unclear. Small-angle neutron scattering (SANS) combined with solvent contrast variation has been used to evaluate potential structural models. While evidence exists that the building blocks are hollow cylinders (tubules), the simultaneous fitting of twelve contrast-varied SANS data sets indicates that the previously proposed model of double walled tubules is incorrect. Predicted scattering based on real space models provides compelling evidence that the origin of the gelling behaviour is the limited assembly of adjacent tubules to form a space-filling network of fibrils.

Gelation Behavior and Stability of Multicomponent Sterol-Based Oleogels

Novel fat mimetic materials, such as oleogels, are advancing the personalization of healthier food products and can be developed from low molecular weight compounds such as γ-oryzanol and β-sitosterol. Following molecular assembly, the formation of a tubular system ensues, which seems to be influenced by elements such as the oleogelators' concentration and ratio, cooling rates, and storage periods. Sterol-based oleogels were formulated under distinct environmental conditions, and a comprehensive study aimed to assess the effects of the mentioned factors on oleogel formation and stability, through visual observation and by using techniques such as small-angle X-ray scattering, X-ray diffraction, confocal Raman spectroscopy, rheology, and polarized microscopy. The long, rod-like conformations, identified by small-angle X-ray scattering, showed that different cooling rates influence oleogels' texture. Raman spectra showed that the stabilization time is associated with the interfibrillar aggregation, which occurred differently for 8 and 10 wt%, with a proven relationship between ferulic acid and the tubular formation. This report gives fundamental insight into the critical point of gelation, referring to the time scale of the molecular stabilization. Our results verify that understanding the structuring mechanisms of oleogelation is decisive for the processing and manufacturing of novel foods which integrate oleogels in their structure.

Oleogel-Based Systems for the Delivery of Bioactive Compounds in Foods

Oleogels are semi-solid materials containing a large fraction of liquid oil entrapped in a network of structuring molecules. In the food industry, these formulations can be used to mimic fats and to deliver bioactive compounds. In the last decade, there has been increasing interest in these structures, not only from a scientific point of view, i.e., studying new molecules, methodologies for gelification, and new structures, but also from a technological point of view, with researchers and companies exploring these structures as a way to overcome certain challenges and/or create new and innovative products. One of the exciting applications of oleogels is the delivery of functional molecules, where the incorporation of oil-soluble functional compounds can be explored not only at the macroscale but also at micro- and nanoscales, resulting in different release behaviors and also different applications. This review presents and discusses the most recent works on the development, production, characterization, and applications of oleogels and other oleogel-based systems to deliver functional molecules in foods.

Oleogels-Their Applicability and Methods of Characterization

Oleogels or, more precisely, non-triglyceride structured lipid phases have been researched excessively in the last decade. Yet, no comprehensive knowledge base has emerged, allowing technology elevation from the laboratory bench into the industrial food application. That is partly due to insufficient characterization of the structuring systems studied. Examining a single composition decided upon by arbitrary methods does not stimulate progress in the research and technology area. A framework that gives much better guidance to product applications can easily be derived. For example, the incremental structure contribution concept is advocated as a parameter to compare the potency of structuring systems. These can straightforwardly be determined by combining solubility data and structural measurements in the recommended manner. The current method to determine the oil-binding capacity suffers from reproducibility and relevance. A newly developed method is suggested to overcome these shortcomings. The recommended new characterization of oleogels should contribute to a more comprehensive knowledge base necessary for product innovations.

Large amplitude oscillatory shear (LAOS) for nonlinear rheological behavior of heterogeneous emulsion gels made from natural supramolecular gelators

The linear and nonlinear rheological behaviors of heterogeneous emulsions gels made from natural glycyrrhizic acid (GA) nanofibrils and sitosterol-oryzanol mixtures (sterols) were investigated using small amplitude oscillatory shear (SAOS) and large amplitude oscillatory shear (LAOS). The nonlinear rheological response was qualitatively analyzed using normalized Lissajous-Bowditch curves. The microstructure of the emulsion gels strongly depended on the concentration of sterols in the oil phase, and showed a percolated segregated network at 10-20 wt% sterols due to the partial coalescence of droplets, and a jamming transition without coalescence at higher sterols concentration of 30 wt%. The microstructure differences led to different linear and nonlinear viscoelastic behaviors of these emulsion gels. SAOS tests showed that the oil phase structuring by the sterols significantly enhance the viscoelasticity of GA nanofibril emulsion gels, and the percolating emulsion gels exhibited higher elasticity than the jammed emulsion gel, as evidenced by a lower damping factor and frequency power-law exponent. The data of crossover strain, phase angle, and the normalized Lissajous-Bowditch curves from LAOS tests further revealed that compared to the samples in a jammed state or without oil phase structuring, the emulsion gels with a percolating segregated network showed higher structural elasticity and thus were more resistant to large deformations, probably due to the slow relaxation of rigid, hydrodynamically interacting clusters of partially coalesced droplets. These findings could potentially aid in the design of novel emulsion gels, based on all-natural and sustainable building blocks, with specific textural and functional properties for foods, cosmetics, and pharmaceutical applications.

Preparation of Protein Oleogels: Effect on Structure and Functionality

Among available structuring agents that have been used to provide solid properties to liquid oils, protein is a more recent candidate. Due to their nutritional value and high consumer acceptance, proteins are of special interest for the preparation of edible oleogels as an alternative for solid fats. Whereas the field of protein oleogelation is still rather new and just starts unfolding, several preparation methods have been demonstrated to be suitable for protein oleogel preparation. However, there is limited knowledge regarding the link between microstructural properties of the gels and macroscopic rheological properties, and the potential of such protein-based oleogels as a fat replacer in food products. In this review, we therefore provide an overview of various protein oleogel preparation methods and the resulting gel microstructures. Based on the different structures, we discuss how the rheological properties can be modified for the different types of protein oleogels. Finally, we consider the suitability of the different preparation methods regarding potential applications on industrial scale, and provide a short summary of the current state of knowledge regarding the behavior of protein oleogels as a fat replacer in food products.

Antioxidant interaction of α-tocopherol, γ-oryzanol and phytosterol in rice bran oil

In this study, purified rice bran oil (RBO) was used as a lipid matrix model to study the individual and binary antioxidant capacity of the minor constituents (α-tocopherol, γ-oryzanol and phytosterol) added at different concentrations and ratios. The results revealed that concentration influenced on the oxidation stability and scavenging capacity, while ratio mainly affected the type of interaction or the degree of synergism or antagonism. It was important to notice that the antioxidant capacity of α-tocopherol would decrease under high concentration. Besides, the inhibition of phytosterol on α-tocopherol and the formation of hydrogen bond between γ-oryzanol and phytosterol were speculated by the interactions of these minor constituents. This work helps to select efficient combinations for stabilizing the anti-oxidation of nutrient enriched RBO or provide suggestions for moderate retain of minor constituents in RBO.

Advances in our understanding of the structure and functionality of edible fats and fat mimetics

The reasons for the increased world-wide incidence of obesity, type-2 diabetes, and cardiovascular disease include sedentary lifestyles and poor food choices. Regulatory agencies in several countries now require companies to add unattractive front of package labels to their products where salt, sugar and fat (or saturated fat) levels are prominently displayed. After the demise of partially hydrogenated fats, saturated fat has become the new target. Consumption of saturated fat over polyunsaturated oil has been clearly shown to increase cholesterol levels in humans. However, saturated fats provide the functionality required in many food products. To complicate matters, concerns over sustainability, veganism, genetically modified organisms, animal welfare, as well as religious beliefs, severely limit our sources of saturated fat. In this review we will discuss recent advances in our understanding of the nano and mesoscale structure of fats, responsible for their physical functionality and contrast it to that of fat mimetics. Fat mimetics include polymeric networks of ethylcellulose, emulsion-templated networks of proteins and polysaccharides, colloidal and self-assembled fibrillar networks of polar lipid crystals, as well as solid o/w emulsions of oil trapped within crystallized lamellar mesophases. Clean label and economic considerations will also be touched upon.

Sterol-based oleogels' characterization envisioning food applications

BACKGROUND

Phytosterols, in particular a mixture of pure γ-oryzanol and β-sitosterol, develop a tubular system that is able to structure oil. In this study, different concentrations of a combination of γ-oryzanol and a commercial phytosterol mixture, Vitaesterol®, were used for the development of edible oil oleogels.

RESULTS

Small-angle X-ray scattering (SAXS) and X-ray diffraction (XRD) were used to characterize at nano and molecular scale the aforementioned oleogels and confirm the formation of sterols-based hollow tubule structures. Increased hardness was observed with the increase of gelator content used in oleogel manufacturing. The produced oleogels showed promising features such as tailored mechanical strength and low opacity, which are important features when considering their incorporation into food products.

CONCLUSION

Despite differences in gel strength, oleogels exhibited textural characteristics that make these structures suitable for incorporation in food products. The oil migration profile associated with these oleogels can provide a solution for the controlled release of lipophilic compounds as well as for the retention of oil in cooked food products. © 2018 Society of Chemical Industry.

Physicochemical characterization of organogels prepared from menhaden oil or structured lipid with phytosterol blend or sucrose stearate/ascorbyl palmitate blend

Phytosterol blend and sucrose stearate/ascorbyl palmitate blend organogelators and different oil phases formed organogels with different physicochemical properties.

Edible oleogels: an opportunity for fat replacement in foods

The scientific and industrial communities have been giving great attention to the development of new bio-based materials with potential use in innovative technological applications. Among these materials are the structures with gel-like behavior that can be used in the cosmetic, pharmaceutical and food industries, aiming at controlling the physical properties of the final products. In the past ten years, words like oleogels and organogels have been increasingly used, the existing number of manuscripts and patents being proof of this tendency. In the food industry, oleogels can be used to control phase separation, and decrease the mobility and migration of the oil phase, providing solid-like properties without using high levels of saturated fatty acids as well as to be a carrier of bioactive compounds. In most cases, their main features are related to the reorganization process of gelators after an increase of the temperature, above the melting or glass transition temperature of the materials, known as the direct method, but it is also possible to develop oleogels by indirect methods, such as emulsification and the solvent exchange technique. In the direct methods, the reorganization is able to physically entrap oil leading to different physicochemical properties, the rheological behavior and texture properties being the frequently most studied ones. This review overviews the use of food grade and bio-based structurants to produce edible oleogels, aiming at fat replacement and structure-tailoring. Gelation mechanisms and oil phases used during oleogel production are discussed, as well as the current food applications and future trends for this kind of structure.

Molecular Interactions behind the Self-Assembly and Microstructure of Mixed Sterol Organogels

In this work, we have employed docking and atomistic molecular dynamics (MD) simulations supported by complementary experiments using atomic force microscopy, rheology, and spectroscopy to investigate the self-assembled structure of β-sitosterol and γ-oryzanol molecules into cylindrical tubules in a nonaqueous solvent. Docking models of several phytosterols, including sitosterol, with oryzanol and other sterol esters demonstrate that for systems to form tubules, the phytosterol sterane group must be stacked in a wedge shape with the ester sterane group and a hydrogen bond must form between the hydroxyl group of the phytosterol and the carbonyl group of the ester. MD of the self-assembled structure were initiated with the molecules in a roughly cylindrical configuration, as suggested from previous experimental studies, and the configurations were found to be stable during 50 ns simulations. We performed MD simulations of two tubules in proximity to better understand the aggregation of these fibrils and how the fibrils interact in order to stick together. We found that an interfibril network of noncovalent bonds, in particular van der Waals and π-π contacts, which is formed between the ferulic acid groups of oryzanol through the hydroxyl, methoxy, and aromatic groups, is responsible for the surface-to-surface interactions between fibrils; an observation supported by molecular spectroscopy. We believe that these interactions are of primary importance in creating a strong organogel network.

Lecithin and phytosterols-based mixtures as hybrid structuring agents in different organic phases

In this study the effect of lecithin (L) addition and solvent quality in a well-established oleogel system formed by β-sitosterol and γ-oryzanol (BG) was investigated. Medium chain triglycerides (MCT) and sunflower oil (SFO) were used as triglycerides and hexadecane (HEX) as a model of linear hydrocarbon. Lecithin was proposed due to its natural and versatile properties, showing different functionalities such as emulsifier and co-oleogelator. A study based on hierarchical organization of structured oil was performed applying techniques for bulk, meso and nanoscale. Self-sustained structures could no longer be observed after 40 wt% of BG replacement by lecithin. Small-angle X-ray scattering showed that the formed nanostructures (building blocks) were dependent on type of solvent and BG:L ratio in the mixture of oleogelators. Differential scanning calorimetry showed that stability against temperature was improved decreasing the polarity of the oil, and a time-dependent self-assembly of hybrid systems was observed from thermal and rheological measurements. Microscopy images exhibited changes on typical fibril aggregation of BG as lecithin was added, which promoted to a certain extent the suppression of ribbons. Oscillatory shear and uniaxial compression measurements were influenced by BG:L ratio and solvent mainly at higher lecithin amount. The combination of BG and MCT appeared to be the most affected by lecithin incorporation whereas SFO rendered harder oleogels. These results could contribute to understand the role of both lecithin and solvent type influencing the host oleogelator structure. It was hypothesized that intermolecular BG complex formation is hindered by lecithin, besides this phospholipid also might coexist as a different phase, causing structural changes in the gel network. Addressing the role of co-oleogelator it can provide the opportunity to tune soft materials with adjusted properties.

Stable emulsions of droplets in a solid edible organogel matrix

Sitosterol and oryzanol self-assemble to form very firm gels in a range of organic solvents. However, due to the formation of sitosterol hydrate crystals, these gels are unstable in the presence of water, prohibiting the dispersal of water droplets throughout the gel matrix. We demonstrate that by using glycerol as the polar phase rather than water, droplets may be dispersed throughout the oil phase without disrupting the self-assembly of the gel. As increasing volumes of water are added to the glycerol, the G' values decrease. This can be correlated to both a drop in water activity, and also the stability of the fibrils in the presence of glycerol compared to water, as elucidated by molecular dynamics simulations. We explore how changing the total volume of polar droplets, and changing the water content of these droplets alters the strength of 15% w/w sterol gels. We find that gels exhibit G' values of ∼1 × 10⁷ Pa even with ∼30% w/w glycerol dispersed throughout the matrix. At higher glycerol loadings, complex multiple emulsion morphologies can form.

Phytosterol-based oleogels self-assembled with monoglyceride for controlled volatile release

BACKGROUND

Oleogels have recently emerged as a subject of growing interest among industrial and academic researchers as an alternative to saturated/trans-fat and delivery of functional ingredients. Phytosterols, comprising plant-derived natural steroid compounds, are preferred for oleogel production because they are both natural and healthy. In the present study, phytosterol-based oleogels self-assembled with monoglyceride were studied with respect to tuning volatile release.

RESULTS

Microscopy images of the bicomponent oleogels of β-sitosterol and monoglyceride showed the formation of a new three-dimensional network of entangled crystals and a controllable microstructure. Our analysis from differential scanning calorimetry and small angle X-ray scattering results suggests the self-assembly of β-sitosterol and monoglyceride via intermolecular hydrogen bonds into spherulitic microstructures. The results showed that the release rate (v₀ ), maximum headspace concentrations (C_max ) and partition coefficients (k_a/o ) for oleogels showed a significantly controlled release and were tunable via the microstructure of phytosterol-based oleogels under both dynamic and static conditions. In addition, the solid-like oleogels had interesting thixotropic and thermoresponsive behaviors, probably as a result of intermolecular hydrogen bonding.

CONCLUSION

The self-assembly of phytosterol-based oleogels with monoglyceride was attributed to intermolecular hydrogen and is demonstrated to be a promising tunable and functional strategy for delivering flavor compounds. © 2017 Society of Chemical Industry.

Low sat-structured fats enriched in α-linolenic acid: physicochemical properties and crystallization characteristics

This work sought to obtain and evaluate zero trans-fat reduced in saturated fatty acids, with higher content of unsaturated fatty acids. Palm oil (PO) was used as the reference of zero trans lipid base. Different amounts of linseed oil (LO) were added to PO, obtaining the following blends: 100:0; 80:20; 60:40; 40:60; 20:80 and 0:100 of PO:LO (w/w%), respectively. These blends were added to fully hydrogenated soybean oil (FHSO) as the crystallization modifying agent, and to sorbitan monostearate (SMS) as the structuring element, both at a proportion of 3% to build the structured fractions. The control and the structured blends were evaluated for fatty acid composition, solid fat content, consistency, crystallization kinetics, thermal behavior, microstructure and polymorphism. With the addition of LO to the PO, an increase of up to 80% was observed in the content of alpha-linolenic acid and a reduction of saturated fatty acids to 47% in the blends. FHSO and SMS offered thermal resistance to the blends, with relevant changes in the crystallization kinetics and microstructure, affecting macroscopic characteristics with the increase in consistence. It was possible to obtain a lipid formulation with features of plasticity and enhanced nutritional quality, compatible with several food applications.

Phytosterols-induced viscoelasticity of oleogels prepared by using monoglycerides

Monoglycerides (MGs) and phytosterols (PS) are known to form firm oleogels with liquid oil. However, the oleogels are prone to undergo polymorphic transition over time that lead to crystals' aggregation thus, compromises physical properties. Thus, we combined MGs with PS to control the crystallization and modify the morphology of the combination oleogels, as both components are reported to interact together. The oleogels were prepared at different ratio combinations and characterized in their rheological, thermal, morphology, and diffraction properties. The results showed that the 8:2 MGP:PS exhibited higher storage modulus (G') than the MGP mono-component. The combination oleogels exhibited effects on the crystallization and polymorphic transition. Consequently, the effects led to change in the morphology of the combination oleogels which was visualized using optical and electron microscope. The resultant effect on the morphology is associated with crystal defect. Due to observable crystals of MGP and PS, it is speculated that the combination oleogels formed a mixed crystal system. This was confirmed with diffraction analysis in which the corresponding peaks from MGP and PS were observed in the combination oleogels. However, the 8:2 oleogel exhibited additional peak at 35.41Å. Ultimately, the 8:2 was the optimum combination observed in our study. Interestingly, this combination is inspired by nature as sterols (phytosterols) are natural component of lipid membrane whilst MGP has properties similar to phospholipids. Hence, the results of our study not only beneficial for oil structuring, but also for the fields of biophysical and pharmaceutical.