Functional Characteristics of Oleogel Prepared from Sunflower Oil with β-Sitosterol and Stearic Acid

Formation, characterization, and application of natural bioactive phytosterol-based oleogels: A review

Oleogels are innovative structured fat systems that can replace detrimental lipids and saturated fats. Among the various gelators used to construct oleogels, phytosterols are regarded as potential oleogelators due to ability to lower blood cholesterol levels and protect patients from cardiovascular illnesses, although little research has been conducted on phytosterols. This article examines the formation, characterization, and application of phytosterol-based oleogels in detail. The oleogelation behaviors of phytosterol-based oleogels are affected by their formulation, which includes phytosterol type, combined oleogelator, proportion, concentration and oil type. These oleogels exhibit potential applications as solid fat substitutes without affecting the texture or sensory properties of food products or as effective delivery vehicles. To encourage the research and implementation of phytosterol-based oleogels, we will ultimately not only highlight problems related to their use in food processing, but also provide a few viewpoints, with the goal of providing fresh insights for advancing trends.

Bioactive foamulsion gels: a unique structure prepared with gellan gum and Acanthophyllum glandulosum extract

BACKGROUND

Foamulsions have become increasingly popular in the food industry due to their ability to enhance the textural, sensory and health-promoting properties of food products. This study was therefore aimed to design and prepare a novel gelled structure, foamulsion gel containing 0-600 g L-1 oil, with gellan gum (GG; 7, 10 and 13 g L-1) and saponin-rich antioxidant Acanthophyllum glandulosum extract (AGE; 2, 6 and 10 g L-1).

RESULTS

The interaction between components was confirmed by infrared spectroscopy. The overrun and porosity of the foamulsion gels increased with antioxidant AGE (1.30 times) and reduced with oil (up to ca 70% and 30%, respectively) and GG levels. The systems were highly stable, and no water or oil was released during the physical stability experiments. Microscopic images showed that the size of air cells was significantly larger than that of oil droplets. The foamulsion gels based on 13 g L-1 GG and 10 g L-1 AGE had markedly higher elastic (G') and viscous (G'') moduli than other samples, and exhibited an elastic and solid-like behavior (G' > G''). The highest gel firmness was found in oil-free sample, and the presence of oil resulted in a lower firmness induced by the larger size and lubrication effect of oil droplets.

CONCLUSION

As a result, the interactions between AGE, GG and oil could lead to the creation of new aerated structures known as bioactive foamulsion gels. These gels exhibit excellent foamability, stability and viscoelasticity and may find applications in the development of novel, healthy and low-calorie aerated foods. © 2024 Society of Chemical Industry.

Characterization of acorn oil and its application on carnauba wax-based oleogel and chocolate spread

This study aimed to characterize acorn oil (AO) and carnauba wax-based acorn oil oleogel (AOG) and the effect of AOG replacement on the textural and sensorial properties of chocolate spread. Oil yields from cold-pressing (Quercus longipes) were around 14%wt with a nice nutty smell. The main fatty acids of AO were included oleic, linoleic, and palmitic acid (44, 38, and 10%wt) respectively. The prepared AOG using 6%wt of carnauba wax (CW) showed high strength (G' > 100 mPa) and oil binding capacity ∼87 %. Based on microstructure assays platelet-like and β' polymorphic triglyceride crystalline networks were formed in AOG. The Pickering AOG/water emulsions in the volumetric ratio of from 90:10 up to 40:60 were stable due to the placement of CW-based AOG particles at the interface of water/oil as Pickering stabilizer. The high physical stability of the emulgel against phase separation is considered an important advantage for using oleogel in chocolate spread formulations instead of vegetable oils, which usually have a high percentage of oil release. The spreads prepared by replacing 50%wt AOG with butter showed acceptable textural and sensorial properties.

Natural oleogelators for the formulation of oleogels by considering their rheological and textural perspective; a review

A well-known method for reducing or swapping out undesirable and controversial fats in food is oleogelation. To quantify the effects of droplets-particle inclusion on the textural aspects of gelled systems, a thorough understanding of rheological behavior of oleogels (OGs) is necessary. Otherwise stated, a rational grasp of rheological characterization is essential for food development, optimization, and processing (when touching or putting food into the mouth, rheological flow qualities influence our perception). This narrative review primarily intends to investigate rheological and textural characteristics of various oleogelator-based OGs, such as operative connection between hardness, distortion, stresses, and rheological parameters like viscosity, elasticity, and viscoelasticity, as well as flow behavior and recovery. Expanding oleogelators concentration and synergistic interactions between them increase robustness and moduli values, as compared to single oleogelators. However, given the lack of information on the connection between the OGs' macroscopic rheological characteristics and their microstructural characteristics, this review presents state-of-the-art overview of various oleogelator-based OGs, highlighting the importance of structure-rheology relationships of OGs to provide advanced knowledge on the development of innovative OGs.

Exploring Diacylglycerol Oil-Based Oleogels as Effective Stabilizers in Peanut Butter: Performance, Structural Insights, and Sensory Evaluation

In the pursuit of reducing oil separation in peanut butter, oleogels synthesized from diacylglycerol (DAG)-rich peanut oils, using glycerol monostearate (GMS) as the gelator, were examined as alternative stabilizers. In comparison to triacylglycerol (TAG)-rich peanut oils, the DAG oil-based oleogels exhibited better oil-binding capacities across increasing GMS concentrations. Intriguingly, thermal and rheological assessments pointed to a weaker network structure in DAG oil oleogels, as evidenced by their lower crystallization temperatures and reduced viscoelastic parameters (G' and G''). Insight from infrared spectroscopy revealed that this could stem from heightened intermolecular hydrogen bonding between the DAG oil and the gelator. When applied to peanut butter, DAG oil oleogels demonstrated efficacy in minimizing oil separation. Extended storage trials affirmed the long-term stability of peanut butter formulations incorporating these oleogels. Furthermore, sensory evaluations by panelists underscored favorable impressions, suggesting potential consumer acceptance. Overall, this study illuminates the promising role of DAG oleogels as effective, alternative stabilizers in peanut butter formulations.

Towards the development of novel bicomponent phytosterol-based oleogels with natural phenolics

Structuring liquid oils into edible oleogels from natural and abundant plant ingredients has great significance in fields ranging from foods to pharmaceuticals but has proven challenging. Herein, novel bicomponent phytosterol-based oleogels were developed with natural phenolics. Investigating diverse natural phenolics, cinnamic acid (CA) and ethyl ferulate (EF) successfully formed oleogels in combination with phytosterols (PS), where a synergistic effect on the oleogelation and crystallization was observed compared to the corresponding single component formulations. FTIR and UV-vis spectra showed that the gel network was primarily driven by hydrogen bonding and π-π stacking. Furthermore, oscillatory shear demonstrated oleogels featured higher elastic and network structure deformation at molar ratio of 5:5 and 3:7. Moreover, the bicomponent phytosterol-based oleogels displayed partially reversible shear deformation and a reversible solid-liquid transition. Such information was useful for engineering the functional properties of oleogel-based lipidic materials, providing significance for the application in foods, cosmetics and pharmaceuticals industries.

Multicomponent Oleogels Prepared with High- and Low-Molecular-Weight Oleogelators: Ethylcellulose and Waxes

The combined interactions between ethylcellulose (EC) and natural waxes to structure edible oil are underexplored. To reduce the high EC concentration required to form a functional oleogel, novel oleogels were prepared using a 50% critical concentration of EC (i.e., 4%) with 1-4% beeswax (BW) and carnauba wax (CRW). One percent wax was sufficient for EC to form self-sustaining oleogel. Rheological analysis demonstrated that 4%EC + 4%BW/CRW had comparable oleogel properties to 8%EC. The yield stress and flow point of wax oleogels were enhanced upon EC addition. EC did not influence the thermal behaviour of the wax component of the oleogel, but the crystallinity and plasticity of the combined oleogel increased. The crystal shape of BW oleogel changed upon EC addition from a needle-like to spherulitic shape. Confocal laser scanning microscopy highlighted the uniform distribution of EC polymeric network and wax crystals. EC/wax mixtures have promising oil-structuring abilities that have the potential to use as solid fat substitutes.

Construction of interfacial crystallized oleogel emulsion with improved thermal stability

In this study, we reported a facile strategy to produce an interfacial crystallized oleogel emulsion for improved thermal stability. The interfacial crystallization of ceramide (non-interfacial active oleogelator) was achieved by addition of a surface active compound, which was demonstrated by interfacial rheology tests and polarized light microscopy. For successfully prepared interfacial crystallized emulsions, smaller particle size was observed when the gelator concentration was lower. However, better thermal stability was achieved when oleogelator concentration was higher than 1 wt%. Results from differential scanning calorimetry, X-ray diffraction and Fourier transform infrared spectroscopy suggested that the interfacial adsorption of ceramide was due to its co-crystallization with the emulsifier driven by hydrogen bonds formed by multiple sites. It provided appropriate crystallinity and steric repulsion for oleogel emulsions against oil droplet coalescence during heating process. This strategy greatly enriches oleogel emulsion formulations and their potential applications in food products involved with thermal treatment.

Protective effect of surfactant modified phytosterol oleogels on loaded curcumin

BACKGROUND

Oleogels represent one of the most important carriers for the delivery of lipophilic nutraceuticals. Phytosterols (PS), plant-derived natural sterol compounds, are preferred for oleogel preparation due to their self-assembly properties and health function. However, the relationship between the physical properties of PS-based oleogels and the chemical stability of loaded bioactive compounds is still unclear.

RESULTS

The influence of lecithin (LC) and glycerol monostearate (GMS) on the physical properties of PS-based oleogels made of liquid coconut oil and the stability of curcumin as a model bioactive loaded in the oleogels was investigated. Results showed that the flow consistency index was much higher for GMS-containing oleogels than that for LC-containing oleogels. The optical microscopy and X-ray scattering analysis showed that the addition of GMS in the PS oleogels promoted the formation of a crystal mixture with different crystal polymorph structures, whereas LC addition promoted the formation of needle-like crystals of PS. Using curcumin as a model lipophilic nutraceutical, the GMS-enriched PS oleogels with high crystallinity and flow consistency index exhibited a good retention ratio and scavenging activity of the loaded curcumin when stored at room temperature.

CONCLUSION

This study shows that enhancing the firmness of oleogels made from PS and liquid coconut oil is beneficial to the retention and chemical stability of a loaded bioactive (curcumin). The findings of the study will boost the development of PS-based oleogel formulations for lipophilic nutraceutical delivery. © 2022 Society of Chemical Industry.

Nanocellulose incorporated oleogel matrix for controlled-release of active ingredients in the lower gastrointestinal tract

Controlled release is often preferred for orally administrated bioactive compounds and drugs. In this study, a nanocellulose (NC) incorporated oleogel encapsulation system was developed for controlled release of active agents. 5-Aminosalicylic acid (5-ASA), an anti-inflammatory drug to treat inflammatory bowel diseases, was used as an example core ingredient for demonstrating the efficacy of the system. Oleogels with/without NC incorporation encapsulating 5-ASA were prepared and tested by in vitro digestion study, and 5-ASA released from the matrix was quantified by a novel UV-Vis spectrometric method developed in this study. The oleogel encapsulation system was characterized by assessing the encapsulation efficiency, oxidative stability, gel hardness, microstructure, and thermal stability. Results showed that sorbitan tristearate-induced oleogel system successfully protected 5-ASA during GI digestion. The incorporation of NC solutions with different NC types, concentrations and volumes further modified the release rate. Specifically, the release of 5-ASA in NC incorporated matrix was <6 % in the gastric phase, and ranged between 17.42 % - 38.28 % in the small intestine depending on the added NC type and concentration. Additionally, the incorporation of NC improved physicochemical stability of the gel matrix. The new 5-ASA quantification method developed in this study is simpler and faster compared with currently available methods.

The Influence of Emulsifiers on the Physiochemical Behavior of Soy Wax/Rice Bran Oil-Based Oleogels and Their Application in Nutraceutical Delivery

This research evaluated the influence of stearic acid, sunflower lecithin, and sorbitan monooleate on soy wax (SYW)/rice bran oil (RBO)-based oleogels. The physiochemical behavior of oleogel samples was evaluated using colorimetry, microscopy, FTIR, mechanical, crystallization kinetics, X-ray diffraction, and a drug release investigation. The prepared oleogels were light yellow, and adding emulsifiers did not change their appearance. All oleogels showed an oil binding capacity of >98%, independent of emulsifier treatment. The surface topography revealed that emulsifiers smoothed the surface of the oleogels. Bright-field and polarized micrographs showed the presence of wax grains and needles. FTIR spectra indicated that oleogel samples had the same functional group diversity as the raw materials. The oleogel samples lacked a hydrogen-bonding peak. Hence, we postulated that non-covalent interactions were involved in the oleogel preparation. According to stress relaxation studies, the firmness and elastic component of oleogels were unaffected by emulsifiers. However, EML3 (oleogel containing sorbitan monooleate) showed lower relaxing characteristics than the others. EML3 exhibited the slowest crystallization profile. Due to its low d-spacing, EML3 was found to have densely packed crystal molecules and the largest crystallite size. The in vitro drug release studies showed that emulsifier-containing oleogels dramatically affected curcumin release. These results may help customize oleogels properties to adjust bioactive component release in the food and pharmaceutical industries.

Oleogels-Innovative Technological Solution for the Nutritional Improvement of Meat Products

Food products contain important quantities of fats, which include saturated and/or unsaturated fatty acids. Because of a proven relationship between saturated fat consumption and the appearance of several diseases, an actual trend is to eliminate them from foodstuffs by finding solutions for integrating other healthier fats with high stability and solid-like structure. Polyunsaturated vegetable oils are healthier for the human diet, but their liquid consistency can lead to a weak texture or oil drain if directly introduced into foods during technological processes. Lately, the use of oleogels that are obtained through the solidification of liquid oils by using edible oleogelators, showed encouraging results as fat replacers in several types of foods. In particular, for meat products, studies regarding successful oleogel integration in burgers, meat batters, pâtés, frankfurters, fermented and bologna sausages have been noted, in order to improve their nutritional profile and make them healthier by substituting for animal fats. The present review aims to summarize the newest trends regarding the use of oleogels in meat products. However, further research on the compatibility between different oil-oleogelator formulations and meat product components is needed, as it is extremely important to obtain appropriate compositions with adequate behavior under the processing conditions.

Structural Characterization and Peroxidation Stability of Palm Oil-Based Oleogel Made with Different Concentrations of Carnauba Wax and Processed with Ultrasonication

The effect of ultrasonication (25 kHz for 10 min) on physical, thermal, and structural properties and storage stability of palm oil-based oleogels prepared using different concentrations of carnauba wax (CW) (5% or 10%) were investigated and compared with oleogels prepared with a homogenizer (2000 rpm for 10 min). Overall, this study found that applying an ultrasonication process with higher CW concentration (10%) effectively improved the properties and stability of palm oil-based oleogel (p < 0.05). Oleogels processed with ultrasonication had higher lightness (L*), higher yellowness (b*), and lower redness (a*) than those processed with homogenizer (p < 0.05), irrespective of CW concentrations. However, a higher CW concentration (10%) increased the textural properties of oleogels such as hardness, stickiness, and tackiness as compared to oleogels with a lower CW concentration (5%) (p < 0.05). Thermal properties including melting onset temperature, melting peak temperature, and melting enthalpy were found to be significantly higher in ultrasonication-processed oleogels with high CW concentration (p < 0.05). Furthermore, the microscopic examination of the oleogels exhibited a strong gel network when prepared using a high concentration of CW and processed with ultrasonication. Fourier Transform Infrared (FTIR) spectra of oleogels revealed that strong intra- and intermolecular interactions were formed by hydrogen bonding between CW and palm oil. X-ray diffraction (XRD) showed a smooth and fine structural network of oleogels and proved that ultrasonication increased the structural properties of oleogel. Moreover, oil loss and peroxide value of oleogels were increased during 90 days of storage (p < 0.05). However, oleogels processed with the ultrasonication had reduced oil loss and increased peroxidation stability during storage (p < 0.05). Overall, this study showed that application of ultrasonication with a higher CW concentration could improve properties and storage stability of palm oil-based oleogel.

Edible oleogels stabilized solely by stigmasterol: effect of oil type and gelator concentration

BACKGROUND

Phytosterols are considered to be one of the most promising gelators for obtaining oleogel because of their additional health benefits and natural coexist with vegetable oils. Previous studies have confirmed that individual phytosterols are not capable of structuring vegetable oils unless they act synergistically with other components. However, based on the self-assembly properties of stigmasterol (ST) in organic solvents, we speculate that it can also structure vegetable oils as a gelator alone.

RESULTS

For the first time, the present study confirmed the feasibility of using ST alone as a gelator for structuring of vegetable oils, including rapeseed oil (RSO), olive oil (OLO) and flaxseed oil (FSO). RSO had the lowest ST gelation concentration (4%, w/w), and the oil-binding capacity and firmness value of the oleogels were the highest. The rheological results showed that all the samples were gelatinous (G' > G″). The results of differential scanning calorimeter and X-ray diffraction further confirmed that the properties of RSO-based oleogels are superior to those prepared by OLO and FSO. The microscopic results also confirmed that the crystal structure of RSO oleogels was more uniform, smaller and more densely distributed.

CONCLUSION

The structural properties of the oleogels were positively correlated with the ST concentration, and various analysis indicators showed that the performance of the oleogel based on RSO was better than that of OLO and FSO. In summary, the present study used ST as a gelator to successfully prepare oleogels with excellent properties, which provides a feasible reference for researchers in related fields. © 2022 Society of Chemical Industry.

Effects of Sorbitan Monostearate and Stearyl Alcohol on the Physicochemical Parameters of Sunflower-Wax-Based Oleogels

A rising health concern with saturated fatty acids allowed researchers to look into the science of replacing these fats with unsaturated fatty acids. Oleogelation is a technique to structure edible oil using gelators. The present study looked for the effect of solid emulsifiers; namely, sorbitan monostearate (SP) and stearyl alcohol (SA), on the physicochemical parameters of oleogels. All the oleogels were formulated using 5% sunflower wax (SW) in sunflower oil (SO). The formulated oleogels displayed irregular-shaped wax crystals on their surface. The bright-field and polarized microscopy showed the fiber/needle network of wax crystals. Formulations consisting of 10 mg (0.05% w/w) of both the emulsifiers (SA10 and SP10) in 20 g of oleogels displayed the appearance of a dense wax crystal network. The SP and SA underwent co-crystallization with wax molecules, which enhanced crystal growth and increased the density and size of the wax crystals. The XRD and FTIR studies suggested the presence of a similar β’ polymorph to that of the triacylglycerols’ arrangement. The incorporation of SA and SP in wax crystal packing might have resulted in a lower crystallization rate in SA10 and SP10. Evaluation of the thermal properties of oleogels through DSC showed better gel recurrence of high melting enthalpy. These formulations also displayed a sustained release of curcumin. Despite the variations in several properties (e.g., microstructures, crystallite size, thermal properties, and nutrient release), the emulsifiers did not affect the mechanical properties of the oleogel. The meager amounts of both the emulsifiers were able to modulate the nutrient release from the oleogels without affecting their mechanical properties in comparison to the control sample.

Novel Formulation of Bigel-Based Vegetable Oil Spreads Enriched with Lingonberry Pomace

In this study, bigel-based vegetable oil spreads with lingonberry pomace addition were prepared. The impact of gelatin, agar and collagen was examined as structuring agents as was the effect of lecithin concentration (0.5, 1.0, 1.5%). Prepared systems were evaluated by physical and chemical stability and structural and rheological properties. It was found that all bigel formulations were self-standing with no signs of phase separation at ambient temperature immediately after preparation and after two weeks of storage at 4 °C temperature. The lingonberry pomace addition affected grainy structure formation with homogenous and uniform distribution of fiber particles throughout the bigel matrix and it also altered the colour of the bigels toward a purple-red. Texture, rheological properties and colour of the spread formulations were affected by the type of the structuring agent as well as the lecithin concentration. The presence of the lingonberry pomace enhanced the resistance of the bigel samples to the oxidation process and it was confirmed by the DPPH^• inhibition, peroxide value and oxipress test. Overall, the formulated bigel-based spreads could be beneficial and had a potential application as healthier fat spreads and be a source of dietary fibers (11 g of fibre per 100 g of the spread).

Synergistic effects of oleogelators in tailoring the properties of oleogels: A review

Conventional solid fats play a crucial role as an ingredient in many processed foods. However, these fats contain a high amount of saturated fats and trans fats. Legislations and dietary recommendations related to these two types of fats set forth as a consequence of evidence showing their deleterious health impact have triggered the attempts to find alternate tailor-made lipids for these solid fats. Oleogels is considered as a novel alternative, which has reduced saturated fat and no trans fat content. In addition to mimicking the distinctive characteristics of solid fats, oleogels can be developed to contain a high amount of polyunsaturated fatty acids and used to deliver bioactives. Although there has been a dramatic rise in the interest in developing oleogels for food applications over the past decade, none of them has been commercially used in foods so far due to the deficiency in their crystal network structure, particularly in monocomponent gels. Very recently, there is a surge in the interest in using of combination of gelators due to the synergistic effects that aid in overcoming the drawbacks in monocomponent gels. However, currently, there is no comprehensive insight into synergism among oleogelators reported in recent studies. Therefore, a comprehensive intuition into the findings reported on synergism is crucial to fill this gap. The objective of this review is to give a comprehensive insight into synergism among gelators based on recent literature. This paper also identifies the future research propositions towards developing oleogels capable of exactly mimicking the properties of conventional solid fats to bridge the gap between laboratory research and the food industry.

Sunflower Oil-Polyglycerol Stearate Oleogels: Alternative Deep-fat Frying Media for Onion Rings

Sunflower oil oleogels consisting of 3% and 8% polyglycerol stearate (PGSO) were studied as an alternative frying media for onion rings. The physicochemical properties and thermo-rheological characteristics of oleogels were provided. The sensorial quality and texture profiles of onion rings fried in oleogels were compared with those fried in control sunflower oil. Free fatty acids at the end of 6 h were determined, and the trend was reported in decreasing order as PGSO-8, control (sunflower) oil, and PGSO-3.The oxidation induction time for PGSO-8 was significantly lower (1.46 min) than that of the control and PGSO-3 samples following frying. Compared to the control group, the onion ring samples fried in oleogels absorbed approximately 33-37% less oil. It was thought that this reduction would help consumers gain less amounts of calories from the fried products. There were no negative effects of oleogel usage on the L* value, aroma, crispness/texture, and overall acceptability scores for the onion ring samples fried in the oleogels.

Oleogels prepared with low molecular weight gelators: Texture, rheology and sensory properties, a review

There is a growing need for healthier foods with no trans and reduced saturated fat. However, solid fats play critical roles in texture and sensory attributes of food products, making it challenging to eliminate them in foods. Recently, the concept of oleogelation as a novel oil structuring technique has received numerous attentions owing to their great potential to mimic the properties of solid fats. Understanding textural, rheological and sensory properties of oleogels helps predict the techno-functionalities of oleogels to replace solid fats in food products. This research critically reviews the textural and rheological properties of oleogels prepared by low molecular weight oleogelators (LMWGs) and functional characteristics of foods formulated by these oleogels. The mechanical properties of LMWG-containing oleogels are comprehensively discussed against conventional solid fats. The interactions between the oleogel and its surrounding food matrix are explained, and the sensory attributes of oleogel containing reformulated products are highlighted. Scientific insights into the texture and rheological properties of oleogels manufactured with a wide range of low molecular gelators and their related products are provided in order to boost their implication for creating healthier foods with high consumer acceptability. Future research opportunities on low molecular weight gelators are also discussed.

Natural Gums as Oleogelators

The natural gums used as high molecular weight oleogelators are mainly polysaccharides that deliver a broad spectrum of possible utilization methods when structuring liquid fats to solid forms. The review discusses a natural gums’ structuring and gelling behavior to capture the oil droplets and form the water/oil gelling emulsions basing on their structural conformation, internal charge, and polymeric characteristics. The specific parameters and characteristics of natural gums based oleogels are also discussed. In the future, oleogels may eliminate saturated and trans fats from food products and allow the production of low-fat products, thus reducing the environmental damage caused by the excessive use of palm oil. The increasing knowledge of molecular interaction in polysaccharide chains of natural gums allows to apply more sustainable and wiser strategies towards product formulation. Innovative solutions for using oleogels based on natural polysaccharide biopolymers let incorporate them into the food matrix and replace fats completely or create blends containing the source of fats and the addition of the oleogel. The profound insight into molecular characteristics of natural gums in the function of being oleogelators is presented.

Production and characterization of biocompatible nanofibrous scaffolds made ofβ-sitosterolloaded polyvinyl alcohol/tragacanth gum composites

Electrospun polyvinyl alcohol (PVA) and tragacanth gum (TG) were used to develop nanofibrous scaffolds containing poorly water-solubleβ-Sitosterol (β-S). Different concentrations and ratios of the polymeric composite includingβ-S (10% w v^-1) in PVA (8% w v^-1) combined with TG (0.5 and 1% w v^-1) were prepared and electrospun. The synthesis method includes four electrospinning parameters of solution concentration, feeding rate, voltage, and distance of the collector to the tip of the needle, which are independently optimized to achieve uniform nanofibers with a desirable mean diameter for cell culture. The collected nanofibers were characterized by SEM, FTIR, and XRD measurements. A contact angle measurement described the hydrophilicity of the scaffold. MTT test was carried out on the obtained nanofibers containing L929 normal fibroblast cells. The mechanical strength, porosity, and deterioration of the scaffolds were well discussed. The mean nanofiber diameters ranged from 63 ± 20 nm to 97 ± 46 nm. The nanofibers loaded withβ-S were freely soluble in water and displayed a remarkable biocompatible nature. The cultured cells illustrated sheet-like stretched growth morphology and penetrated the nanofibrous pores of the PVA/β-S/TG scaffolds. The dissolution was related to submicron-level recrystallization ofβ-S with sufficient conditions for culturing L929 cells. It was concluded that electrospinning is a promising technique for poorly water-solubleβ-S formulations that could be used in biomedical applications.

Application of Oleogel and Conventional Fats for Ultrasound-assisted Obtaining of Vegan Creams

The purpose of this study was to determine the impact of the fat system type (milk fat - MF, palm oil - PO or oleogel - OG, i.e. RO-LO - rapeseed oil and linseed oil mixture structured by candelilla wax) on the properties of soy creams, in comparison with dairy cream. The MF exhibited the most increase of acid value (2.5-fold), and the RO-LO - increase of peroxide value (3-fold), after 30 days of storage at 20°C. The PO was the most oxidative stable. The OG presented the slightest oxidative changes, the highest slip melting point (39°C) and centrifugal stability (99.6%). The pH and total acidity values of soy creams were similar to soy drink. All creams exhibited unimodal distribution of dispersed particles. The average particle size and dispersity indexes of these emulsions were in range of 1.74-1.80 µm and 0.93-1.16, respectively. The creams with MF or OG exhibited a greater viscosity than sweet dairy cream - 1.66 10^-5 nm^-2, and a higher degree of shear-thinning. The accelerated creaming phenomenon (flotation of lipids molecules) occurred during centrifugation. The cream with PO had the lowest resistance to centrifugal force (instability index - 0.052). The possibility to obtain a stable vegan soy creams containing oleogel (as replacer of conventional fats) has been demonstrated.

Application of Analytical Methods for the Comprehensive Analysis of Oleogels-A Review

Numerous empirical studies have already been conducted on the innovative fat-replacing system defined as oleogel, creating a real urge for setting up a framework for future research, rather than conducting studies with arbitrary methods. This study re-evaluates the utility of some analyses and states some conclusions in order to eliminate the reluctance of food processors and consumers towards the utilization of oleogels as ingredients. The review presents extensively the methods applied for the characterization of various oleogels, while highlighting their addressability or inconveniences. The discussed methods were documented from the research published in the last five years. A classification of the methods is proposed based on their aims or the utility of the results, which either describe the nano-structure and the network formation, the quality of the resulting oleogel or its suitability as food ingredient or other edible purposes. The general conclusions drawn for some classes of oleogels were also revisited, in order to ease the understanding of the oleogel behaviour, to encourage innovative research approaches and to stimulate the progress in the state of art of knowledge.

Characterization of functional chocolate formulated using oleogels derived from β-sitosterol with γ-oryzanol/lecithin/stearic acid

With an aim to prepare the functional chocolate, corn oil was used as the base oil and β-sitosterol was combined with oryzanol/stearic acid/lecithin to prepare respective oleogels (GO, SO, and LO). Oleogels (12%) were prepared by adding compound oleogelators at different ratios [GO-2:3, SO-1:4, and LO-4:1 (w/w)] in corn oil. The microstructure, interaction, thermodynamic, crystalline, and rheological behavior of formulated oleogels were studied by microscopic observation, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), X-ray diffraction (XRD), and rotational rheometer, respectively. The results showed that GO had the strongest gel forming ability and the densest gel crystallization network. Moreover, chocolate prepared with GO (cocoa butter and oleogels-1:1) had the similar texture, crystal structure, rheological, and sensory properties to that of dark chocolate. This study provides the possibility for the wider application of oleogel prepared with lower saturated and trans-fatty acids in the chocolate industry.

Study of monoglycerides enriched with unsaturated fatty acids at sn-2 position as oleogelators for oleogel preparation

The effect of using highly unsaturated 2-monoglycerides as oleogelators on the properties of soybean oil oleogels designed to eliminate saturated and trans fatty acids was investigated in this study. We adopted a novel two-step synthesis aiming to increase the yield of the 2-monoglycerides. The optimal synthesis conditions were a substrate weight ratio of 2:1 (w/w), 10% Lipozyme 435 (w/w total reactants), and 4 h of reaction time at room temperature. Under these conditions, the 2-monoglyceride yield (40.69%) increased by 10% compared to that of the conventional synthesis route. Additionally, soybean oil oleogels prepared using 10% 2-monoglycerides with or without rice bran wax were systematically characterized by polarized light microscopy, a texture analyzer, XRD spectroscopy, and rheometry. Comparative studies indicated that a combination of rice bran wax and 2-monoglycerides had synergistic effects on gel properties. A mixture of 4% rice bran wax and 6% 2-monoglycerides was found to provide better oleogels.

Effect of high-intensity ultrasound on the oleogelation and physical properties of high melting point monoglycerides and triglycerides oleogels

Oleogels and oleogelation routes have been extensively studied in the past decade; however, the industry has not yet implemented this technique due to price, availability, and clean label. The objective of this study was to evaluate the synergism of binary oleogels structured by monoglycerides (MG) and high melting point triacylglycerols (HF) with and without high-intensity ultrasound (HIU) according to their physical properties. MG:HF (0:6, 1:5, 2:4, 3:3, 4:2, 5:1, and 6:0) oleogels were produced by mixing at 70 °C with a stirring of 350 rpm for 5 min, followed by a cooling and storage at 20 °C for 24 hr. A 20-kHz HIU was applied for 10s, 30s, or 10s using three pulses (10sON/10sOFF) during the cooling step via a macro tip (12.7 mm) and 50% amplitude (56 W) in the presence of few -crystals. Samples were evaluated according to their hardness, oil-binding capacity (OBC), microstructure, melting behavior, viscoelasticity, and flow behavior. The best physical properties were found in the MG6:HF0 oleogel, with a hardness of 1.2 N, elasticity of 5.5 kPa, viscosity of 99 Pa⋅s and 99% OBC. These properties were reduced with the decrease of MG in the blend. The sonication did not improve the MG6:HF0, instead it affected its properties negatively. However, sonication showed a positive effect on the blends of MG and HF. The hardness was improved at least threefold and OBC around 20%, these effects were already observed using only 10s sonication. Sonocrystallization induced secondary nucleation and changed the crystalline material only in blends containing HF indicating the better effect of the sonocrystallization on oleogels in the presence of high-melting points triacylglycerols. PRACTICAL APPLICATION: Oleogels are a valuable alternative in food industry to replace trans and reduce saturated fatty acids content in many food products. The combination of a binary structuration and use of high-intensity ultrasound that is a physical green technology will give the food industry information on how to improve the physical properties of oleogels without increasing the amount of oleogelators, giving a future alternative to clean label and sensory claims of oleogels applications.

Engineering water-induced ceramide/lecithin oleogels: understanding the influence of water added upon pre- and post-nucleation

A mixture of ceramide (CER) and lecithin (LEC) at specific ratios was capable of forming oleogels in sunflower oil triggered by adding a trace amount of water. It was noted that the addition of water at different temperatures (TW) resulted in different gelation behaviors and microstructures. To better illuminate the assembly mechanism at different TW, samples with water added at different TW (20 °C, 45 °C, 70 °C and 95 °C) were prepared. The viscoelastic properties, microstructures, and the crystal packing of these samples were investigated. It was observed that all samples prepared at TW of 20 °C and 95 °C formed gels, while most samples prepared at TW of 45 °C and 70 °C were too weak to form gels. Gels prepared at 95 °C were stronger but more fragile in texture compared to gels produced at 20 °C. The crystal morphology of gels drastically changed with TW. Spindle-shaped crystals were observed in gels prepared at low TW (20 °C), while gels prepared at high TW (95 °C) exhibited a network with packed oil droplets stabilized by lamellar shells together with fibrillar crystals in the bulk phase. X-ray diffractograms showed a different reflection peak (d-spacing of 14.5 Å) in gel prepared at 20 °C, compared to the d-spacing in oleogels with a single gelator (13.14 Å and 15.33 Å, respectively, for CER and LEC). Gel prepared at 95 °C showed two long-spacing characteristic peaks, which correspond to the characteristic peaks of CER gel (∼13 Å) and LEC gel (∼12 Å). Fourier transform infrared spectroscopy results indicated that the different gelation behaviors at different TW were mainly caused by vibrational changes in the amide bond of CER. Our hypothesized assembly mechanism can be concluded as: increasing TW resulted in the conversion of CER and LEC crystallization from co-assembly (TW = 20 °C) to self-sorting by individual gelators (TW = 95 °C). In this study, novel water-induced oleogels were produced by manipulating TW, and such information further assists the rational design of lipid-based healthy fat products.

Unlocking the potential of minimally processed corn germ oil and high oleic soybean oil to prepare oleogels for bakery application

In this study, the influence of sunflower wax (SFX) concentration (1, 3, 5, 7, and 9 wt%) on the properties of oleogels prepared using expeller-pressed corn germ oil (EPC) or high oleic soybean oil (EPS) was comprehensively investigated. Overall, oleogels can be prepared from both EP oils at an SFX level ≥3 wt%. The strength of oleogels depends on SFX concentration. EPS oleogels had better rheological properties and a higher amount of platelet-like crystals than EPC oleogels. The characteristics of cookies prepared with both oleogels were evaluated and compared to cookies prepared with commercial shortening. The lipid distribution in the cookies as visualized by CLSM suggested that EPS oleogels with a 5 or 7 wt% SFX had a greater possibility of replacing commercial shortening as they exhibited even lipid distribution which enabled good air-incorporation and air retention abilities. This research provides a foundation for developing healthy bakery products by using minimally processed oil based oleogels.

Self-assembled lipids for food applications: A review

Lipids play an important role in human nutrition. Several foodstuffs can be manufactured from the simple, compound and derived lipids. In particular, the use of self-assembled lipids (SLs, e.g. self-assembled L-α-lecithin) has brought great attention for the development of tailored, tuned and targeted colloidal structures loading degradation-sensitive substances with valuable antimicrobial, antioxidant and nutraceutical properties for food applications. For example, polyunsaturated fatty acids (PUFAs) and essential oils can be protected from degradation, thus improving their bioavailability in general terms in consumers. From a nanotechnological point of view, SLs allow the development of advanced and multifaceted architectures, in which each molecule of them are used as building blocks to obtain designed and ordered structures. It is important to note before beginning this review, that simple and compound lipids are the main SLs, while essential fatty acids and derived lipids in general have been considered by many research groups as the bulk loaded substances within several structures from self-assembled carbohydrates, proteins and lipids. However, this review paper is addressed on the analysis of the lipid-lipid self-assembly. Lipids can be self-assembled into various structures (micelles, vesicular systems, lyotropic liquid crystals, oleogels and films) to be used in different food applications: coatings, controlled and sustained release materials, emulsions, functional foods, etc. SLs can be obtained via non-covalent chemical interactions, primarily by hydrogen, hydrophilic and ionic bonding, which are influenced by the conditions of ionic strength, pH, temperature, among others. This manuscript aims to give an analysis of the specific state-of-the-art of SLs for food applications, based primarily on the literature reported in the past five years.

Assembly pattern of multicomponent supramolecular oleogel composed of ceramide and lecithin in sunflower oil: self-assembly or self-sorting?

Ceramide (CER) is a novel food-grade organogelator with beneficial health effects. Lecithin (LEC) is not an effective gelator; however, it may alter the crystal morphology of the host gelator in a multicomponent system. In this paper, LEC and CER were mixed at various molar ratios in sunflower oil leading to different gelation behaviors. It was interesting since in this multicomponent system, gels formed when there was more less-effective gelator (LEC), while gels hardly formed when there was more effective gelator (CER). This drew our attention since there might not be only one kind of assembly mode between the LEC and the CER. A comprehensive rheological investigation was conducted. It was found that at specific ratios (6L4C and 5L5C), strong gels (G' > 1.0 × 105 Pa) formed with superior oil binding capacity (up to 99.84%). Meanwhile, these gels exhibited higher tolerance level to permanent deformation than the monocomponent gel. However, weak gels were observed off the optimal ratio (8L2C, 7L3C, 4L6C and 3L7C). The crystal morphology of gels drastically changed with change in gelator proportion. Short needle-like crystals and small rosette crystals were observed in 6L4C and 5L5C, respectively, while other samples exhibited spherulite-shaped crystals (8L2C, 7L3C, 4L6C, and 3L7C), which differed from any of the monocomponent gel structures (10L0C and 0L10C). Results from differential scanning calorimetry and polarized light microscopy suggested that the macroscopic properties are determined by the morphology and distribution of crystals rather than the crystallinity of the matrix. Fourier transform infrared spectroscopy results indicated the presence of van der Waals forces and the formation of hydrogen bonding between the phosphate of the LEC and the amide group of the CER. The above results indicated that the LEC and CER co-assembled at approximately equal molar ratio, and the redundant LEC or CER at other ratios self-sorted to combine with the co-assembled fibers by lateral association, leading to potentially different underlying microstructures. These multicomponent supramolecular oleogels with high tunability may further broaden their applicability in various healthy lipid-based product formats.

Rheological and structural properties of oleogel base on soluble complex of egg white protein and xanthan gum

Oleogels can be used to provide solid-like properties without using high levels of saturated fatty acids. In this study, the edible oleogels structure developed based on egg white protein (EWP) (5%) and xanthan gum (XG) (0%, 1%, 0.5%, and 0.75% wt/wt) complex by using aerogels system as a template for oleogel preparation. The effect of pH on the EWP-XG mixture indicated the creation of a soluble complex of EWP-XG in pH 5.5. The Fourier-transform infrared spectroscopy confirmed the interaction between EWP and XG. The amount of absorbed oil was considerably higher in EWP-XG aerogels. SEM showed a soft surface in EWP 5% aerogel, which can be the reason for its less oil absorption. The aerogel and oleogel including more XG concentration had a stronger network structure and created more elastic oleogels. The light microscopy images revealed by increasing of XG concentration, the structure of protein gel mesh became more compact and regular. The XRD patterns of the aerogels did not show any clear differences between crystallinity of the samples. Therefore, it can be concluded that the aerogels based on the structuring of EWP-XG complexes have a high potential as a three-dimensional network for the oil absorption and creating oleogel.

Physical properties and cookie-making performance of oleogels prepared with crude and refined soybean oil: a comparative study

The objective of this research was to fabricate crude soybean oil oleogels (CSO) using β-sitosterol (BS) and/or monoacylglycerol (MAG) and compare their role with that of refined soybean oil oleogels (RSO) in cookie making. Both crude and refined soybean oil oleogels were formed with BS or MAG, or the combination of both (1 : 1) at a fixed concentration of 10 wt%. The thermal behavior of the oleogels was measured using differential scanning calorimetry (DSC). The crystal structure and morphology of the oleogels were characterized using X-ray diffraction (XRD) and polarized light microscopy (PLM). The hardness of the oleogel and commercial vegetable shortening was compared using a texture analyzer. The characteristics of cookies made with the oleogels were compared with those of cookies made with commercial vegetable shortening. Overall, the incorporation of BS and/or MAG into crude and refined soybean oil can produce oleogels with solid-like properties. Refined soybean oil formed stronger and firmer oleogels as compared to crude soybean oil. RSO structured by BS presented branched fiber-like, elongated plate-like, and needle-like crystals while the same oil gelled by MAG contained spherulite crystals. RSO made with the combination of BS and MAG displayed crystal morphologies from both BS and MAG. The same crystal morphologies were observed in CSO with lower quantities. Comparing the quality of cookies made with the oleogels and commercial vegetable shortening, equal or better performance of both RSO and CSO in terms of weight, thickness, width, spread ratio, and hardness of cookies than that of commercial vegetable shortening was observed. By combining the results of the physical characterization and cookie making performance, it can be concluded that both crude and refined soybean oleogels could resemble commercial shortening, which offers the possibility of using oleogels to replace shortening in the baking industry.

Utilization of unsaponifiable matter from rice bran oil fatty acid distillate for preparing an antioxidant-rich oleogel and evaluation of its properties

Rice bran oil fatty acid distillate (RBOFAD) is an important by-product obtained from the physical refining process. This fatty acid distillate contains high a amount of Unsaponifiable Matter (γ-oryzanol 3.27 gm/100gm UM; total tocopherol 10.93 mg/100 g UM; total phytosterol 21.81 g/100g UM; squalene 1.15 g/100 g UM and total fatty alcohol 73.34 g/100 g UM) and free fatty acids. Antioxidant-rich Oleogels were obtained from rice bran wax (RBW), rice bran oil fatty acid distillate (RBOFAD) and refined rice bran oil. The main objective of this study was to utilize the antioxidant-rich unsaponifiable matter of RBOFAD (UMRBOFAD) as an organogelator along with rice bran wax, which also acts as a good organogelator. Antioxidant-rich oleogel was prepared using UMRBFAD, ethylcellulose (EC) and RBW at 2%, 2%, 3% on weight basis, respectively, in refined rice bran oil and this antioxidant-rich oleogel was compared with rice bran oil oleogel using RBW at 7% on weight basis of rice bran oil. These oleogels were evaluated using a combination of techniques such as differential scanning calorimetry (DSC), polarized light microscopy (PLM), Viscosity, synchrotron radiation X-ray diffraction (SR-XRD) and FTIR Spectroscopy. The differential scanning calorimetry (DSC) measured the thermal properties of rice bran oil oleogel and high antioxidant-rich oleogel. Polarized light microscopy images revealed needle-like crystals for RBW. SR-XRD measurements were used for clarification of the crystal structures of the building blocks of these oleogels. The antioxidant activities of oleogels were evaluated involving DPPH and ABTS assays.

Formation, characterization, and potential food application of rice bran wax oleogels: Expeller-pressed corn germ oil versus refined corn oil

The expeller-pressed (EP) corn germ oil oleogels were prepared using rice bran wax (RBX) at different concentrations (3, 5, 7, and 9 wt%). Their structural properties, including color, hardness, thermal behavior, rheological property, and crystal structure were evaluated. The performance of oleogels for potential food application was examined by incorporating oleogels into cookies as a fully replacement for commercial shortenings. Overall, RBX could form oleogels in both refined and EP corn germ oils at a concentration ≥3 wt%. Refined corn oil produced a stronger gel than crude corn oil. When comparing cookie characteristics, cookies made with both types of oleogels showed similar properties with commercial cookies. This result indicates that oleogels made by refined and EP corn germ oil together with RBX have the potential to imitate the functionality of commercial shortening in the baking industry.